wise owls appliqué - scissortail stitches · wise owls appliqué - scissortail stitches ......

20
It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved. Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen. WP434_48 Small Round Owl 1.70 X 2.22 in. 43.18 X 56.39 mm 3,100 St. WP435_48 Large Round Owl 2.79 X 3.52 in. 70.87 X 89.41 mm 4,462 St. z WP436_48 Profile Owl Small 1.89 X 2.94 in. 48.01 X 74.68 mm 4,014 St. WP437_48 Profile Owl Large 2.99 X 4.29 in. 75.95 X 108.97 mm 3,198 St. WP438_48 Round Owl 1.98 X 2.54 in. 50.29 X 64.52 mm 3,424 St. WP439_48 Skinny Owl 1.52 X 2.85 in. 38.61 X 72.39 mm 3,116 St. R WP440_48 Ear Tufts Owl 2.60 X 4.20 in. 66.04 X 106.68 mm 9,593 St. z WP441_48 Small Owl 1.07 X 1.68 in. 27.18 X 42.67 mm 3,503 St. S WP442_48 Big Heart Owl 2.73 X 3.98 in. 69.34 X 101.09 mm 6,034 St. R WP444_48 Three Trees Appliqué 4.39 X 5.36 in. 111.51 X 136.14 mm 4,754 St. L WP445_48 Large Tree Appliqué Jumbo 4.55 X 7.96 in. 115.57 X 202.18 mm 4,529 St. L WP446_48 Appliqué Tree 4.50 X 6.73 in. 114.30 X 170.94 mm 5,366 St. L WISE OWLS APPLIQUÉ Pack 12366 • 21 Designs

Upload: others

Post on 08-Oct-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.

WP434_48 Small Round Owl1.70 X 2.22 in.

43.18 X 56.39 mm3,100 St.

WP435_48 Large Round Owl2.79 X 3.52 in.

70.87 X 89.41 mm4,462 St. z

WP436_48 Profile Owl Small1.89 X 2.94 in.

48.01 X 74.68 mm4,014 St.

WP437_48 Profile Owl Large2.99 X 4.29 in.

75.95 X 108.97 mm3,198 St.

WP438_48 Round Owl1.98 X 2.54 in.

50.29 X 64.52 mm3,424 St.

WP439_48 Skinny Owl1.52 X 2.85 in.

38.61 X 72.39 mm3,116 St. R

WP440_48 Ear Tufts Owl2.60 X 4.20 in.

66.04 X 106.68 mm9,593 St. z

WP441_48 Small Owl1.07 X 1.68 in.

27.18 X 42.67 mm3,503 St. S

WP442_48 Big Heart Owl2.73 X 3.98 in.

69.34 X 101.09 mm6,034 St. R

WP444_48 Three Trees Appliqué4.39 X 5.36 in.

111.51 X 136.14 mm4,754 St. L

WP445_48 Large Tree Appliqué Jumbo

4.55 X 7.96 in.115.57 X 202.18 mm

4,529 St. L

WP446_48 Appliqué Tree4.50 X 6.73 in.

114.30 X 170.94 mm5,366 St. L

Wise OWls AppliquéPack 12366 • 21 Designs

Page 2: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.

WP447_48 Appliqué Branch4.24 X 7.76 in.

107.70 X 197.10 mm7,826 St. R L

WP448_48 Appliqué Leaves1.90 X 1.77 in.

48.26 X 44.96 mm1,168 St.

WP449_48 Appliqué Flower1.58 X 1.53 in.

40.13 X 38.86 mm1,126 St. R

WP450_48 Appliqué Flower 23.02 X 3.04 in.

76.71 X 77.22 mm4,077 St. R

WP451_48 Linework Border.85 X 5.23 in.

21.59 X 132.84 mm1,991 St. R L S

WP452_48 Linework Branch4.41 X 6.74 in.

112.01 X 171.20 mm7,480 St. R L

WP453_48 Linework Flower 11.36 X 1.37 in.

34.54 X 34.80 mm679 St. R S

WP454_48 Linework Flower 21.29 X 1.35 in.

32.77 X 34.29 mm607 St. R S

WP455_48 Linework Flower 31.50 X 1.53 in.

38.10 X 38.86 mm945 St. R

Wise OWls AppliquéPack 12366 • 21 Designs

NOTE: Applique Fabric Not Included.

Page 3: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Listings below indicate color sample, stitching order and suggested thread color number in Isacord, YLI Fine Metallic, Yenmet or YLI Variegated threads.

WP434_48 Small Round Owln 1. Purple Feathers........................................ 2910n 2. Pink Details Above Eyes .......................... 2650n 3. Chest Placement Stitch ............................ 0020n 4. Chest Tackdown ....................................... 0015n 5. Eyes Placement Stitch ............................. 0020n 6. Eyes Tackdown ........................................ 0015n 7. Yellow Beak & Talons ............................... 0713n 8. Pupils ....................................................... 0020n 9. Outer Edge of Eyes .................................. 0015

WP435_48 Large Round Owln 1. Wings Placement Stitch ........................... 0015n 2. Wings Tackdown ...................................... 0015n 3. Head & Chest Placement Stitch ............... 0015n 4. Head & Chest Tackdown .......................... 0015n 5. Ears Placement Stitch .............................. 0015n 6. Ears Tackdown ......................................... 0015n 7. Purple Ears Details .................................. 2900n 8. Yellow Chest ............................................ 0713n 9. Eyes Placement Stitch ............................. 0015n 10. Eyes Tackdown ........................................ 0015n 11. Pupils, Beak, & Feet................................. 0020n 12. Outer Edge of Eyes .................................. 0713

WP436_48 Profile Owl Smalln 1. Foot .......................................................... 1375n 2. Body Placement Stitch ............................. 0020n 3. Purple Chest ............................................ 2900n 4. Body Tackdown ........................................ 0015n 5. Wing Placement Stitch ............................. 0020n 6. Wing Tackdown ........................................ 0015n 7. Face ......................................................... 2900n 8. Pupils ....................................................... 0020n 9. Eyes & Beak............................................. 0713

WP437_48 Profile Owl Largen 1. Legs ......................................................... 1375n 2. Head Placement Stitch............................. 0020n 3. Head Tackdown ........................................ 0015n 4. Chest Placement Stitch ............................ 0020n 5. Chest Tackdown ....................................... 0015n 6. Feathers Under Beak ............................... 0970n 7. Eyes & Tail Tip Placement Stitch.............. 0020n 8. Eyes & Tail Tip Tackdown ......................... 0015n 9. Wing Placement Stitch ............................. 0020n 10. Wing Tackdown ........................................ 0015n 11. Pupils & Beak .......................................... 0020n 12. Outer Rings on Eyes ................................ 0870

WP438_48 Round Owln 1. Chest & Head Placement Stitch ............... 0020n 2. Chest & Head Tackdown .......................... 0015n 3. Orange Wings & Chest Details ................ 0904n 4. Eyes Placement Stitch ............................. 0020n 5. Eyes Tackdown ........................................ 0015n 6. Pink Eyes ................................................. 2560n 7. Dark Orange Around Eyes ....................... 1301n 8. Pupils & Beak ........................................... 0020n 9. Pupil Outlines ........................................... 0015n 10. Feet .......................................................... 3572

WP439_48 Skinny Owln 1. Head Placement Stitch............................. 0020n 2. Head Tackdown ........................................ 0015n 3. Body Placement Stitch ............................. 0020n 4. Body Tackdown ........................................ 0015n 5. Wings ....................................................... 3652n 6. Feet & Eyes.............................................. 2560n 7. Beak & Eyes............................................. 3572n 8. Pupils ....................................................... 0020n 9. Pupil Outlines ........................................... 0015

WP440_48 Ear Tufts Owln 1. Lower Body Placement Stitch .................. 0020n 2. Lower Body Tackdown ............................. 0015n 3. Purple Wings ............................................ 2910n 4. Wing Outlines ........................................... 2711n 5. Blue Chest & Ears .................................... 3611n 6. Blue Chest Details.................................... 0015n 7. Head Placement Stitch............................. 0020n 8. Head Tackdown ........................................ 0015n 9. Eyes Placement Stitch ............................. 0020n 10. Eyes Tackdown ........................................ 0015n 11. Yellow Eyes .............................................. 0713n 12. White Feathers Around Beak ................... 0015n 13. Eye Outlines ............................................. 2711n 14. Pupils, Beak, & Feet................................. 0020

WP441_48 Small Owln 1. Wings ....................................................... 2910n 2. Body ......................................................... 2711n 3. Pink Around Eyes & Outlines ................... 2560n 4. Pupils ....................................................... 0020n 5. White Around Eyes................................... 0015n 6. Beak, Heart, & Feet.................................. 3572

WP442_48 Big Heart Owln 1. Wings Placement Stitch ........................... 0020n 2. Wing Tackdown ........................................ 0015n 3. Head & Body Placement Stitch ................ 0020n 4. Head & Body Tackdown ........................... 0015n 5. Off White Face Feathers .......................... 0870n 6. Beak ......................................................... 1375n 7. Eyes Placement Stitch ............................. 0020n 8. Eyes Tackdown ........................................ 0015n 9. Orange Chest ........................................... 0904n 10. Orange Chest Details ............................... 0015n 11. Eyes ......................................................... 1301n 12. Eyes Linework .......................................... 0713n 13. Pupils & Feet ............................................ 0020

WP444_48 Three Trees Appliquén 1. Left Tree Placement Stitch ....................... 0020n 2. Left Tree Tackdown .................................. 0015n 3. Middle Tree Outer Placement Stitch ........ 0020n 4. Middle Tree Outer Tackdown ................... 0015n 5. Middle Tree Inner Placement Stitch ......... 0020n 6. Middle Tree Inner Tackdown .................... 0015n 7. Right Tree Placement Stitch..................... 0020n 8. Right Tree Tackdown ................................ 0015n 9. Tree Trunks .............................................. 1375

WP445_48 Large Tree Appliqué Jumbon 1. Tree Placement Stitch .............................. 0020n 2. Tree Tackdown ......................................... 0015n 3. Tree Trunks .............................................. 3572

WP446_48 Appliqué Treen 1. Blue Placement Stitch .............................. 0020n 2. Blue Tackdown ......................................... 0015n 3. Green Placement Stitch ........................... 0020n 4. Green Tackdown ...................................... 0015n 5. Red & Orange Placement Stitch .............. 0020n 6. Red & Orange Tackdown ......................... 0015n 7. Tree Trunk ................................................ 1375

WP447_48 Appliqué Branchn 1. Base of Branch Leaf Placement Stitch.....0020n 2. Base of Branch Leaf Tackdown & Details 0015n 3. Middle Leaf Placement Stitch................... 0020n 4. Middle Leaf Tackdown & Details .............. 0015n 5. Spiral Satin Leaf ....................................... 2910n 6. Appliqué Flower Placement Stitch ........... 0020n 7. Appliqué Flower Tackdown ...................... 0015n 8. Appliqué Flower Details ........................... 0232n 9. End Leaf Placement Stitch ....................... 0020n 10. End Leaf Tackdown & Details .................. 0015n 11. Heart Flower............................................. 2560n 12. Leaf & Heart Flower Center ..................... 6133n 13. Heart Flower Center Details ..................... 0015n 14. Branches .................................................. 0020

WP448_48 Appliqué Leavesn 1. Back Leaf Placement Stitch ..................... 0020n 2. Back Leaf Tackdown & Details ................. 0015n 3. Front Leaf Placement Stitch ..................... 0020n 4. Front Leaf Tackdown & Details ................ 0015

WP449_48 Appliqué Flowern 1. Flower Placement Stitch .......................... 0020n 2. Flower Tackdown ..................................... 0015n 3. Flower Center Details............................... 2560

WP450_48 Appliqué Flower 2n 1. Outer Green Details ................................. 6133n 2. Background Placement Stitch .................. 0020n 3. Background Tackdown ............................. 0015n 4. Petals Placement Stitch ........................... 0020n 5. Petals Tackdown ...................................... 0015n 6. Outer Center Ring .................................... 2910n 7. Inner Center Ring ..................................... 0713

WP451_48 Linework Bordern 1. Single Color Design ................................. 0020

WP452_48 Linework Branchn 1. Single Color Design ................................. 0020

WP453_48 Linework Flower 1n 1. Single Color Design ................................. 0020

WP454_48 Linework Flower 2n 1. Single Color Design ................................. 0020

WP455_48 Linework Flower 3n 1. Single Color Design ................................. 0020

Wise OWls AppliquéPack 12366 • 21 Designs

Page 4: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©
Page 5: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

aPPliqué Patterns

Wise OWl Appliqué

Page 6: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Wise OWl AppliquéaPPliqué Patterns

Page 7: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Wise OWl AppliquéaPPliqué Patterns

Page 8: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Wise OWl AppliquéaPPliqué Patterns

Page 9: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Wise OWl AppliquéaPPliqué Patterns

Ninth

Page 10: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Wise OWl AppliquéaPPliqué Patterns

Page 11: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Wise OWls Appliqué

WP434_48_CWA01 For Use With the Bernina CutWork Accessory

1.77 X 1.49 in.44.96 X 37.85 mm

872 St. S

WP435_48_CWA03 For Use With the Bernina CutWork Accessory

1.90 X 1.67 in.48.26 X 42.42 mm

853 St.

WP435_48_CWA07 For Use With the Bernina CutWork Accessory

3.29 X 1.98 in.83.57 X 50.29 mm

1,648 St.

WP434_48_CWA02 For Use With the Bernina CutWork Accessory

2.24 X 1.50 in.56.90 X 38.10 mm

1,047 St.

WP435_48_CWA04 For Use With the Bernina CutWork Accessory

2.61 X 1.88 in.66.29 X 47.75 mm

1,294 St.

WP436_48_CWA01 For Use With the Bernina CutWork Accessory

2.29 X 3.11 in.58.17 X 78.99 mm

1,664 St.

WP435_48_CWA01 For Use With the Bernina CutWork Accessory

1.38 X 1.91 in.35.05 X 48.51 mm

720 St. S

WP435_48_CWA05 For Use With the Bernina CutWork Accessory

1.66 X 1.72 in.42.16 X 43.69 mm

849 St.

WP436_48_CWA02 For Use With the Bernina CutWork Accessory

1.71 X 2.20 in.43.43 X 55.88 mm

1,749 St.

WP435_48_CWA02 For Use With the Bernina CutWork Accessory

1.30 X 1.93 in.33.02 X 49.02 mm

714 St. S

WP435_48_CWA06 For Use With the Bernina CutWork Accessory

1.68 X 2.04 in.42.67 X 51.82 mm

880 St.

WP437_48_CWA01 For Use With the Bernina CutWork Accessory

2.57 X 3.41 in.65.28 X 86.61 mm

1,963 St.

Page 12: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Wise OWls Appliqué

WP437_48_CWA02 For Use With the Bernina CutWork Accessory

2.99 X 2.19 in.75.95 X 55.63 mm

1,306 St.

WP438_48_CWA01 For Use With the Bernina CutWork Accessory

2.30 X 2.94 in.58.42 X 74.68 mm

1,460 St.

WP440_48_CWA01 For Use With the Bernina CutWork Accessory

2.38 X 2.19 in.60.45 X 55.63 mm

1,438 St.

WP437_48_CWA03 For Use With the Bernina CutWork Accessory

2.43 X 1.60 in.61.72 X 40.64 mm

1,183 St.

WP438_48_CWA02 For Use With the Bernina CutWork Accessory

2.25 X 1.72 in.57.15 X 43.69 mm

1,171 St.

WP440_48_CWA02 For Use With the Bernina CutWork Accessory

3.01 X 2.22 in.76.45 X 56.39 mm

1,559 St.

WP437_48_CWA04 For Use With the Bernina CutWork Accessory

2.24 X 1.53 in.56.90 X 38.86 mm

950 St.

WP439_48_CWA01 For Use With the Bernina CutWork Accessory

2.13 X 2.10 in.54.10 X 53.34 mm

1,193 St.

WP440_48_CWA03 For Use With the Bernina CutWork Accessory

1.50 X 1.51 in.38.10 X 38.35 mm

748 St.

WP437_48_CWA05 For Use With the Bernina CutWork Accessory

2.33 X 2.17 in.59.18 X 55.12 mm

1,204 St.

WP439_48_CWA02 For Use With the Bernina CutWork Accessory

1.64 X 2.05 in.41.66 X 52.07 mm

1,030 St.

WP440_48_CWA04 For Use With the Bernina CutWork Accessory

1.52 X 1.51 in.38.61 X 38.35 mm

765 St.

Page 13: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Wise OWls Appliqué

WP442_48_CWA01 For Use With the Bernina CutWork Accessory

1.02 X 2.46 in.25.91 X 62.48 mm

862 St. S

WP442_48_CWA05 For Use With the Bernina CutWork Accessory

1.56 X 1.71 in.39.62 X 43.43 mm

833 St.

WP444_48_CWA04 For Use With the Bernina CutWork Accessory

2.34 X 2.06 in.59.44 X 52.32 mm

1,155 St.

WP442_48_CWA02 For Use With the Bernina CutWork Accessory

1.06 X 2.41 in.26.92 X 61.21 mm

895 St. S

WP444_48_CWA01 For Use With the Bernina CutWork Accessory

3.31 X 2.05 in.84.07 X 52.07 mm

1,531 St.

WP445_48_CWA For Use With the Bernina CutWork Accessory

5.06 X 5.91 in.128.52 X 150.11 mm

3,314 St. L

WP442_48_CWA03 For Use With the Bernina CutWork Accessory

2.67 X 4.31 in.67.82 X 109.47 mm

2,284 St.

WP444_48_CWA02 For Use With the Bernina CutWork Accessory

3.17 X 3.07 in.80.52 X 77.98 mm

1,711 St.

WP446_48_CWA01 For Use With the Bernina CutWork Accessory

2.10 X 2.35 in.53.34 X 59.69 mm

1,109 St.

WP442_48_CWA04 For Use With the Bernina CutWork Accessory

1.56 X 1.71 in.39.62 X 43.43 mm

817 St.

WP444_48_CWA03 For Use With the Bernina CutWork Accessory

2.29 X 2.34 in.58.17 X 59.44 mm

1,233 St.

WP446_48_CWA02 For Use With the Bernina CutWork Accessory

1.93 X 1.33 in.49.02 X 33.78 mm

769 St. S

Page 14: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Wise OWls Appliqué

WP446_48_CWA03 For Use With the Bernina CutWork Accessory

1.58 X 2.39 in.40.13 X 60.71 mm

896 St.

WP446_48_CWA07 For Use With the Bernina CutWork Accessory

2.31 X 2.48 in.58.67 X 62.99 mm

1,287 St.

WP447_48_CWA02 For Use With the Bernina CutWork Accessory

2.03 X 1.85 in.51.56 X 46.99 mm

1,020 St.

WP446_48_CWA04 For Use With the Bernina CutWork Accessory

2.10 X 1.53 in.53.34 X 38.86 mm

850 St.

WP446_48_CWA08 For Use With the Bernina CutWork Accessory

2.09 X 2.21 in.53.09 X 56.13 mm

1,154 St.

WP447_48_CWA03 For Use With the Bernina CutWork Accessory

2.11 X 2.11 in.53.59 X 53.59 mm

1,164 St.

WP446_48_CWA05 For Use With the Bernina CutWork Accessory

4.16 X 4.61 in.105.66 X 117.09 mm

3,023 St.

WP446_48_CWA09 For Use With the Bernina CutWork Accessory

1.59 X 1.57 in.40.39 X 39.88 mm

793 St.

WP447_48_CWA04 For Use With the Bernina CutWork Accessory

1.67 X 2.42 in.42.42 X 61.47 mm

1,097 St.

WP446_48_CWA06 For Use With the Bernina CutWork Accessory

1.94 X 1.60 in.49.28 X 40.64 mm

911 St.

WP447_48_CWA01 For Use With the Bernina CutWork Accessory

2.02 X 1.83 in.51.31 X 46.48 mm

990 St.

WP448_48_CWA01 For Use With the Bernina CutWork Accessory

1.82 X 1.94 in.46.23 X 49.28 mm

943 St.

Page 15: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Wise OWls Appliqué

WP448_48_CWA02 For Use With the Bernina CutWork Accessory

1.63 X 2.42 in.41.40 X 61.47 mm

984 St.

WP450_48_CWA03 For Use With the Bernina CutWork Accessory

1.44 X 1.24 in.36.58 X 31.50 mm

624 St. S

WP449_48_CWA For Use With the Bernina CutWork Accessory

2.09 X 2.07 in.53.09 X 52.58 mm

1,162 St.

WP450_48_CWA04 For Use With the Bernina CutWork Accessory

1.32 X 1.41 in.33.53 X 35.81 mm

627 St. S

WP450_48_CWA01 For Use With the Bernina CutWork Accessory

3.10 X 3.12 in.78.74 X 79.25 mm

1,738 St.

WP450_48_CWA05 For Use With the Bernina CutWork Accessory

1.31 X 1.43 in.33.27 X 36.32 mm

638 St. S

WP450_48_CWA02 For Use With the Bernina CutWork Accessory

1.22 X 1.42 in.30.99 X 36.07 mm

667 St. S

WP450_48_CWA06 For Use With the Bernina CutWork Accessory

1.43 X 1.24 in.36.32 X 31.50 mm

632 St. S

Page 16: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

WP434_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP434_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP435_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP435_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP435_48_CWA03 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP435_48_CWA04 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP435_48_CWA05 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP435_48_CWA06 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP435_48_CWA07 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP436_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP436_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP437_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP437_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP437_48_CWA03 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP437_48_CWA04 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP437_48_CWA05 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP438_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP438_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP439_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP439_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP440_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

NOTE: Placement Stitch and Basting Stitch should match your background fabric.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Wise OWls Appliqué

Page 17: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

WP440_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP440_48_CWA03 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP440_48_CWA04 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP442_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP442_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP442_48_CWA03 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP442_48_CWA04 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP442_48_CWA05 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP444_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP444_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP444_48_CWA03 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP444_48_CWA04 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP445_48_CWA For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP446_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP446_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP446_48_CWA03 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP446_48_CWA04 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP446_48_CWA05 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP446_48_CWA06 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP446_48_CWA07 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP446_48_CWA08 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

NOTE: Placement Stitch and Basting Stitch should match your background fabric.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Wise OWls Appliqué

Page 18: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

WP446_48_CWA09 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP447_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP447_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP447_48_CWA03 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP447_48_CWA04 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP448_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP448_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP449_48_CWA For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP450_48_CWA01 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP450_48_CWA02 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP450_48_CWA03 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP450_48_CWA04 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP450_48_CWA05 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

WP450_48_CWA06 For Use With the Bernina CutWork Accessoryn 1. Placement Stitch .......................................... 3600n 2. Basting Stitch ............................................... 1902n 3. Bernina CutWork Accessory Cut 1 ..............Cut 1n 4. Bernina CutWork Accessory Cut 2 ..............Cut 2n 5. Bernina CutWork Accessory Cut 3 ..............Cut 3n 6. Bernina CutWork Accessory Cut 4 ..............Cut 4

NOTE: Placement Stitch and Basting Stitch should match your background fabric.

Pre-cut aPPliqué files for use with Bernina© cutwork accessory

Wise OWls Appliqué

Page 19: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

PREPARE APPLIQUE FABRICStarch appliqué fabric 2-3 times following manufacturer’s instructions.1. Appliqué fabric should be crisp.2. Iron Appliqué Fuse & Fix to the wrong side of the starched appliqué fabric following instructions on 3. product packaging.

CUT APPLIQUÉ PIECESHoop one layer of Cut-Away Stabilizer.1. Send first CWA file to the embroidery machine. (CWA files are the pre-cut appliqué files to use with the 2. CutWork Accessory; these files will end in CWA01, CWA02, and CWA03 etc. The number of CWA files available for each design will depend upon how many separate appliqués each design contains.)Stitch the first color, this will be the placement stitch.3. Remove the hoop from the machine but do not remove the stabilizer from the hoop. Spray the hooped 4. stabilizer with temporary spray adhesive. Lay prepared appliqué fabric over the placement stitch, being sure to completely cover the stitching. Apply pressure to appliqué fabric to ensure it is adhered.Stitch the second color, this will be the basting stitch. It is meant to baste the appliqué fabric to your 5. hooped stabilizer.Replace normal stitch plate with the CutWork stitch plate.6. Unthread the machine.7. If necessary, turn off the upper thread control on your machine. Refer to your machine’s user manual. 8. Note that the most recent version of the 830 will perform this task automatically.Replace embroidery needle with the CutWork Accessory.9. Replace embroidery foot with foot #44 (If you do not have foot #44 you can leave foot #15 on the ma-10. chine; foot #44 will simply keep the cut fabric from flagging as much).Attach the hoop to the machine.11. To cut the first appliqué piece follow the “thread 12. changes” on your machine screen and turn the dial on the CutWork tool as required.Remove the hoop from the machine.13. Gently remove cut appliqué piece, trimming any 14. thread that may have not been cut completely. PHOTO 1Repeat as needed for designs with multiple appli-15. qué pieces.

TACkdOwn APPLIQUÉ And COmPLETE EmBROIdERy dESIgnReplace the embroidery needle and rethread the machine.1. Replace the embroidery foot #15.2. Spray hoop sized piece of stabilizer that is appropriate for your project and adhere to wrong side of back-3. ground fabric or project that is to be hooped.Hoop fabric/project and stabilizer.4. Attach hoop to machine.5. Send the embroidery file to the machine (this is not a CWA file).6. Stitch design as normal following the thread changes on the provided thread chart stopping after each 7. Appliqué Placement Stitch.

PHOTO 1

SUPPLIESCut-Away Stabilizer• Temporary Spray Adhesive• Appliqué Fuse & Fix Stabilizer• Embroidery Thread• Stabilizer that is appropriate for your project• BERNINA® CutWork Accessory•

Making Precut aPPliqué using Bernina© cutwork accessory

Page 20: Wise OWls Appliqué - Scissortail Stitches · Wise OWls Appliqué - Scissortail Stitches ... Bernina©

It is a violation of Copyright law to make and distribute copies of software or artwork. Software is licensed to the original purchaser for use at one location. ©2011 OESD, LLC. All rights reserved.

After stitching an Appliqué Placement Stitch, take the precut 1. appliqué pieces required and peel off the cutaway backing and the release paper revealing a sticky backing. PHOTO 2Remove hoop from machine, but do not remove the fabric 2. from the hoop.Adhere precut appliqué piece evenly over the Appliqué 3. Placement Stitch; use pressure to make sure pieces stick well. PHOTO 3Reattach hoop to machine.4. Continue stitching design until all appliqué pieces are placed 5. and all stitching is complete. PHOTO 4

PHOTO 2

PHOTO 3

PHOTO 4

nOTE: design pictured is for instructional purposes and may not be included in this collection.

Making Precut aPPliqué using Bernina© cutwork accessory