Hand-held Kess v2- K-Touch read and write ECU data

WOBD2 recently released a new ECU chip tuning tool- New Genius Touch & Map, so-called “hand-held kess v2”. And here, some more info about this K-Touch will be offered for all.

Top 7 reasons to get New Genius Touch MAP:1. Multi-language: English, Italian, German, French, Spanish, Portuguese and Hungarian2. Newest Hardware V5.053. World-class Touch MAP ECU Chip Tuning Tool, able to work without connection a computer during the critical phases of reading and writing of the ECU, ensuring the process is executed in complete safety. As a completely independent tool, the risks of working with a PC can be avoided, risks such as stalling, Windows crashes, power failure etc… 

4. Hand-held version Kess ECU Programmer, but support more new vehicles than Kess v2.New Genius has communication modules available for Cars, Bikes, LCV, Trucks, Tractors / Agricultural Marine, and support CAN-BUS, KWP, J1850 protocols. 

5. Support both petrol and diesel vehicles6. Available in both Master and Slave

7. It is equipped with a sophisticated system for the recovery of the ECU for any problems occurred during programming.

How to install New Genius Video guide:https://mega.nz/#!Vp0GQCZC

Preparation Disconnect network connection when installing and using K-touch.

Go to K-TOUCH disk (F:).Open K-TOUCH-E->read first.pdfClick Accept for the license agreement.Minimize the pdf interface.

Step 1 Install K-TOUCH V1.0Open K-Touch.Click Next.Click Install.Installing K-Touch...Select setup language. OK.Setup requirements

Installing requirements...Click OK to restart the computer.

Step 2 Install K-Touch and Race EVOOpen K-Touch.Click Next.Click Install.Installing K-Touch...Select setup language. OK.Setup requirements

Installing requirements...

Race EVO (rev. 431 build 829) Setup 1 - Install Aware Wizard: click Next.

Important info for Race EVO installation: click Next.(Windows XP SP3 with 1GB RAM memory)

Go to read first.pdf, to copy Dimensione Sport Customer Code: C7535 to Race EVO. Then click Next.

Click Next.Click Next to install.Cancel the tick on Run Race EVO (rev. 431 build 829) Setup 1 now. And click Finish for installing Race EVO.

Click Finish for installing K-Touch.

Tips on K-Touch read out data using computer1 connect k-touch machine with power adapter, and then wait until the machine boot. If the machine cannot boot, turn off power then connect to power again, until the machine boot.2 use USB cable to connect the machine to the computer, then read out K-Touch data.

Found new hardware wizard: click Next.Click Finish for installing the software for DimSport - New Genius Device.

Go to Computer Management.Select Device Manager->Universal Serial Bus controllers->DimSport - New Genius Device.

Then close computer management.

Step 3 Run K-TouchOpen K-Touch on Desktop.Click Accept definitely.Please update database.... Click No.Select K-Touch->Explore...Race EVO: GENIUS is not updated.... Click OK.Select FILE/Read/000. Then save on Desktop.

Click Yes to extract header.

Back to FILE to select Write. Import on Genius.

Open file “000” (not notepad 000) on desktop.

Back to FILE. Select Help (on top menu bar)->System information.Read and click OK.

Select Help (on top menu bar)->Information About.This is K-touch standard version 7.06.506 build 3029.

Done

SE128http://www.wobd2.com/wholesale/new-genius-touch-map.htmlSE87http://www.wobd2.com/wholesale/kess-v2.htmlRelated Download Files:

http://www.wobd2.com/upload/pro/ecu-hand-held-chip-tuning-tool-vehicle-list.rar