wwvv.geappliancesmuni d'une fiche fi 3 broches (raise fi la terre) qui se branche darts une...

wwvv.GEAppliances.com

N

Safety Instructions

Adapter Plugs ................ 6

Connecting Electricity ......... 4Extension Cords .............. 5

Proper Disposal .............. 9Safety Precautions ............ 3

Operating InstructionsAutomatic Icemaker .......... 11

(',are and Cleaning ........ 19, 13

Shelves .................... 8, 9

Storage Drawers ............ 9, 10

Temperature Controls .......... 7

Installation Instructions

Preparing to Install

the Refrigerator ............. 14

Reversing the Door Swing . . 19-94_'ater Line Installation ..... 15-19

Troubleshooting TipsBefore You Call For Serxice . .96, 97

Normal Operating Sounds ..... 95

Customer Service

Consumer Support .... Back Cover

Product Registration ....... 99, 30

_'arranty forCanadian Customers ......... 98

_'arrantv for U.S. Customers . . . 31

Write the model and serialnumbers here:

Model #

Serial #

You can find them on a label on

the upper lett side of the ti'esh tood

COIIlp}l I'tIIl en t.

162D3905P011 49-60250-2 ! 1-04JR

DANGER!RISK OFCHILDENTRAPMENTPROPERDISPOSALOFTHEREFRIGERATOR

Child entral)inent and suffocation are noti)rol)lems of the past.Junked or abandoned

refl_igera to _ a re still dangerous.., ex'en if thevwill sit fin" "just a few days." If you are getting

rid of yore" old refi_igerato_; please ti)llow theinstructions below to help prevent accidents.

Before YouThrowAway YourOldRefrigeratoror Freezer:

_ke off tile (loo_.

i,eaxe tile shelves in place so that childrenmay not easil_ climb inside.

Refrigerants

All refrigeration products contain refrigerants,

which under fi_(leral law must be removed priorto product disposal. If you are getting rid of an

old refrigeration product, check with tilecompany handling tile disposal about whatto (lo.

DANGER! RISQUES POUR LES ENFANTSCOMMENTVOUSDEBARRASSERCONVENABLEMENTDEVOTREANCIENREFRIGERATEUR

I,es entimts pris au pi&ge ou morts d'asphyMe

sont tot!joui_ d'actualit_. I,es r_li_ig_rateu_abandonnes sont to//jO/llN aussi dangereux,

m6me si on n'attend que <_quelquesjom_,,pour s'en d_barrasse_: Si vous ne gardez pas

votre ancien r6frig_ratem; veuillez suivre lesdirectives ci-dessous afin de pr&'enir les accidents.

Avant de vous debarrasser de votre ancien

refrigerateur ou congelateur :

D&nontez les portes.

I,aissez les clavettes en place afin d'emp_cherles enlimts de grimper fl l'int_riem:

Refrigerants

Tousles appareils de r_fl'ig_ration contiennent

des r_fl'ig_rants qui, conform&nent aux loisti¢(l_rales, doivent 6tre enlev_s avant toute

_limination de l'appareil. Si vous vousd_barrassez de vieux appareils de r_li'ig_ration,

v&'ifiez, aul)r_s de la soci_t_ qui s'occupe deleur _limination, ce que vous devez taire.

IMPORTANTSAFETYINFORMATION.READALLINSTRUCTIONSBEFOREUSING. www.GEAppliances.com

WARNING!Use this appfiance only for its intended purpose as described in this Owner's Manual

SAFETYPRECAUTIONSWhen using electrical appfiances, basic safety precautions should be followed, including the following:

This refl'i ge ra tor Ill t 1st be p rope rl) insta 11e dand located in accordance with the Installation

Instructions befin'e it is used.

, Do not allow children to climb, st;rod or hangon the shelves in the reflJgeratoi: They could

damage the refl_igerator and seriously iqiurethemselves.

Do not touch the cold surli_ces in the fl'eezer

compartment when hands are damp or wet.Skin mm stick to these extremely cold StllS{ilces.

, Do not store or use gasoline or other flammable\'ap(>_s and liquids in the vicinity (>Ithis or any

other appliance.

Keep finge_s out (ff the "pinch point" areas;clearances between the (lores and betweenthe (loo_s and cabinet are necessariN small.

Be careflfl closing do(n_ when children arein the area.

_ ]n refl_igeratcns with automatic icemake_s,avoid contact with the moving parts of theejector mechanism, or with the heating element

that releases the cubes. Do not place finge_s or

hands on the automatic icemaking mechanismwhile the refrigerator is plugged in.

Unplug the refl_igerator befi)re cleaning andmaking repai_.

NOTE."We strongly recommendthat anyservicing beperformedby a quafified lbdividua/.

Tm'ning the control to the 0 posit.ion does

not remove power to the light circuit.

Do not refl'eeze fl'ozen fi)ods which have

thawed completely:

MESURESDESlJCURITlJIMPORTANTES.LISEZD'ABORDTOUTESLESDIRECTIVES.

AVERTISSEMENT!N'utilisez cot #lectromOnager que pour I'usage auquel fl est destin#, comme expliqu# dons leprOsent manuel.

MESURESDES@URITCcLorsque vous utilisez un appareil #lectrique, observez toujours los mesures de s#curit# de base,y compris les suivantes.

]nstallez le r_fl_ig_rateur confimn&n ent a ux

direcfixes d'installafion axant de l'utilise_:

Ne laissez pas les enfimts grimpe_; s'asseoi_;se tenir debout ni se pendre aux clayettes du

r(qi_ig0ratem: ]Is pomTaient endommager ler&fl_ig_rateur et se blesser gravement.

N'entreposez et n' udlisez pas d'essence ouautres vapems et liquides inflammables ;'l

proximit(_ de cet appareil ou de tout autre

appareil 81ectromSnage_:

; t_loignez les doigts des parties du r_fl_ig_ratem"

ot'l l'on peut e_cilement se pincer : les espaces

entre les portes et entre les portes et les placardssont tOI{jOIII'S (_troits. Soyez prudent lo_sque

vous termez les p(>rtes de l'appareil en prg_sencedes enfimts.

Si votre r_flJg_rateur est dotO d'tme machine ;'_gla_ons automafique &itez le contact axec les

pi&ces mobiles du m_canisme _jectem; ou avec

l'_l&nent chattflimt qui lib_ere les glaoms.Ne posez pas les doigts ou les mains sin" lem_canisme de la machine _'lglooms pendant

que le r&fl_ig_rateur est branch,.

Ne touchez pas les surlilces fl'oides du cong_lateursi vous avez les mains humides ou mouill6es : la

peau risque d'adh&'er aces surli_ces mXsfl'oides.

D0branchez votre r(qi_ig0rateur avant de le

nettover ou de le r_pare_:

REMARQUE : Nous vousrecommandonsvivementde

confier toute r@aration _ un technicienquafifi#.

I,oI_qtle Veils r_glez la commande sin" 0 (_teint),l'alimentation (qectrique de l'ampoule n'est pas

coupg_e.

Ne recongelez pas les aliments smgel_s qtfi ont

compl{etement d_gel_. 3

IMPORTANTSAFETYINFORMATION.READALLINSTRUCTIONSBEFOREUSING.

WARNING!HOWTOCONNECTELECTRICITYDo not, under any circumstances, cut or remove the third (ground) prong from the power cord.For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equippedwith a 3-prong (grounding) plug which mates

with a st;mdard 3-prong (g_x)unding) wall outletto minimize the possibili_' of electric shock hazard

fl'om this appliance.

Have the wall outlet and circuit checked bv a

qualified electrician to make sure the outlet ispropedy grounded.

X4]/ere a standard 2-prong wall out.let isencountered, it is your personal responsibility and

obligation to have it replaced with a propedygrounded 3-prong wall outlet.

The refrigerator should always be plugged into itsown individual electrical outlet which has a voltage

rating that matches the rating plate.

This provides the best perfimnance and also

prexents oxerloading house wiring circuits which

could cause a fire hazard from oxerheated wires.

Never unplug your refligerator by pulling on the

power cord. Mways grip plug firefly and pullstraight out ti'oln the outlet.

Repair or replace immediately all power cords thathave become fl'aved or otherwise damaged, Do not

use a cord that shows cracks or abrasion damagealong its length or at either end.

When moving the refl_igerator away ti'om thewall, be careful not to roll over or damage the

power cord.

MESURESDESECURITEIMPORTANTES.LISEZD'ABORDTOUTESLESDIRECTIVES.

.4,A VERTISSEMENT!RACCORDEMENTELECTRIQUENo coupez ni retirez on aucun cos la troisiOme broche (mise _ la terre) de la fiche du cordon

d'alimentafion. Pour votre s6curit6, cet appareil doit Otre correctement mis _ la terre.

I,e cordon d'alimentafion de cet appareil est

muni d'une fiche fi 3 broches (raise fi la terre)

qui se branche darts une prise murale ordinaire

fi 3 alv&_les (raise fi la terre) pour r&hfire au

minimum les risques de chocs _lectriques,

Fakes examiner la prise de coumnt et le circuit

par un _lectriden qualfli_ pour vous assurer que

la prise est correctement raise fi la terre.

Si la prise murale est du type st;mdard fi 2 alv&des,

il vous incombe de la taire remplacer par une

prise fi 3 alv&_les correctement raise fi la torte.

i,e r6fl_ig&'ateur doit totljOtllN etre branche dans

sa propre prise de coumnt, dont la tension

nominale est identique fi celle indiqu_e sur la

plaque signal_fique.

Cette pr6caution est recommand_e pour garantirun rendement optimum et &'iter une surcharge des

citvuits _lectriques de la r_sidence, ce qui pourraitcrier un risque d'incendie par surchaufli _ des ills.

Ne d_branchezjamais le r_ti_ig&'ateur en drantsur le cordon d'alimentation. Saisissez tem_ement

la fiche du cordon et tirez droit pour la retirerde la prise.

R_parez ou remplacez imm&liatement tout cordon

efliloch_ ou endommag_. N'ufilisez pas un cordon

tendill_ ou pr_sentant des signes d'usure.

i,o_que w)us d_placez votre r6fl_ig&'ateur du ram;

efims atmnfion de ne pas le fifire fouler sur le cordond'alimentation afin de ne pas l'endommaget:

4

IMPORTANTSAFETYINFORMATION.READALLINSTRUCTIONSBEFOREUSING. vvvvw.GEAppl_nce_com

USEOFEXTENSIONCORDSBecause of potential safety hazards under certain conditions, we strongly recommend

against the use of an extension cord.

Howe\'e_; if you must use an extension cord, it is absolutely necessary that it be a UIAisted (in the United

States) or a CSA certified (in Canada), 3-wire grounding type appliance extension cord having a groundingtype plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.

CORDONSPROLONGATEURSNous vous recommandons fortement de ne pas utiliser de cordons prolongateurs _ cause des risques

potentiels qu'ils pr#sentent clans certaines conditions.

Toutefifis si w)us d0cidez d'udliser tout de m_me tm cordon prolongatetH; il est absolument n0cessaire

qu'il s'agisse d'tm cordon a 3 ills avec Inise a la terre pour appareils (_lectroln(_nagei_ homologu_ UI, (auxEtnt_Unis) ou certifi(_ CSA (au Canada), pourvtl d'tme fiche et d'tme prise raises a la terre de 15 amperes(minimum) et de 120 volts.

IMPORTANTSAFETYINFORMATION.READALLINSTRUCTIONSBEFOREUSING.

USEOFADAPTERPLUGS(AdapterplugsnotpermittedinCan_d_JBecause of potential safety hazards under certain conditions, we strongly recommend against

the use of an adapter plug.

Howevex; if you must use an adaptex; where local

codes pemfit, a temporary connection may be madeto a properly grotmded 2-prong wall outlet bv use

of a UI Aisted adapter awfilable at most localhardware stores.

The linger slot in the adapter must be aligned with

the larger slot in the wall outlet to provide proper

polaris," in the connection of the power cord.

\_]_en disconnecting the power cord from the

adapte_, always hold the adapter in place with one

hand while pulling the power cord plug with the

other hand. If this is not done, the adapter grotmd

temfinal is vet_' likely to break with repeated use.

If the adapter grotmd temfinal breaks, DO NOT USEthe refrigerator tmtil a proper grotmd has beenestablished.

Attachingtheadaptergroundterminaltoa waftoutletcoverscrewdoesnotgroundtheapplianceunlessthecoverscrewis metal,andnotinsulated,andthewaftoutletisgroundedthroughthehousewking Youshouldhavethecircuitcheckedbya quafiflede/ectnclantomakesuretheoutletis properlygroundecL

READAND FOLLOWTHISSAFETYINFORMATIONCAREFULLY.

SAVETHESEINSTRUCTIONS

MESURESDES[:CURIT[:IMPORTANTES.LISEZD'ABORDTOUTESLESDIRECTIVES.

FICHED'ADAPTAdON(Fi_hesd'_d_t_tion,,on_ermi_e_auC_n_da)Nous vous recommandons fortement de ne pas utiliser une fiche d'adaptation _ cause des risques

potentiels qu'elle pr#sente clans certaines circonstances.

Toutetois, si vous d_ddez d' utiliser tout de m6me

tree fiche d'adaptafion, vous pouvez eflectuer tmraccordement temporaire, si les codes locaux le

pem_ettent, darts tree prise de torn'ant ;'l 2 al\'&_les

ad&luatement raise ;'l la terre en utilisant tree fiched'adaptation homologu_e UI,, en vente darts la

plupart des quincaillerJes.

I,a tente la plus longue de la fiche doit &tre align_e

avec la fente la plus longue de la prise inurale afind'assurer la polafit_ appropfi_e pour lebranchement du cordon d'alimentafion.

Si la borne de raise a la terre de la fiche casse,

N'UTILISEZ PAS l'appareil tant qu'une raise a la terre

adg_quate n'aura pas _t_ rg_tablie.

Le fait de fixer la borne de mlse_ la terrede la fiche

d'adaptation _ /a p/awe de/a prise decourant n'assurepas

automatiquement /a raise _ /a terrede/'apparei/, fl faut que /avis soit enm#ta/, non iso/#e,et clue/a prise decourant soit

raise _ /a terre par l'entremise ducgb/agede/a rdsidence.Faites vdrifier le ckcuit par unblectnUen quafifib pour vous

assurer que /a prise est ad#quatementraise _ /a terra

I,orsque w)us dgd)ranchez le cordon d'alimentafion

de la fiche d'adaptafion, saisissez toujom_ la fiche

d'tme main pendant que vous firez sin" la fiche

du cordon d'alimentation de l'autre. Sinon,

la borne de raise fi la terre de la fiche d'adaptation

risque de casser avec le temps.

VEUILLEZLIREETSUIVREATTENTIVEMENTCESMESURESDESdLCURITE.

CONSERVEZCESDIRECTIVES

Aboutthe temperaturecontroldial _.CE4..lia.ces.comTurning the dial to 0 stops cooling in both compartments-fresh food and freezer. It does not shut off powerto the refrigerator.

ControlSettingsTemperature Control Dial

The temperature control dial has nine settings plus 0. I is the warmest. 9 is the coldest.

At fi_t, set the dial at 5.

Afier using the refl'igerato_, a(!just the dial if necessary.

Insert a coin into the slot in the middle of the dial and wm can ttli'n the dial to the settingthat's best suited to wmr needs.

Allow 24 horn's for the refl'igerator to get cold.

Aboutthe freshfoodcompartmentshelves.

Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.

Half-Width Shelves

r_]qlt up

One end of the shelf rests on a molded

side-wall support; a bracket on the otherend hooks into a track on the rearcabinet wall.

To remove, lift the shelf up at fl'ont, thenoff the SUl)l)ort and out of the track.

To replace, select desired shelf height.With shelf ti'ont raised slightly, hook thebracket's top lug into the track, then

lower the shelf onto the SUl)port.

NOTE:Theshelf to the @t of the trackbdesignedto hookinto the @t-hand slot,the shelf to the left is designedto hookinto theleft-handslot.

Full-Width Shelves

Some models have a steel wire slidingshelf, a stationary tempered glass shelf ortwo steel wire stationary shelves. These

shelves can be moved to another placein the fl'esh fi)od compartment.

The fifll-width sliding shelf has stop-locks.

When placed correctly on the shelfSUl)ports, the sh elf will stop befi)re coming

completely ()tit of the refi'igerator and willnot tilt when you place food on it orI'eI/lOVe fl)od ti'OIll it.

To remove the full-width shelves, lift the

rear of the shelf and pull forward.

Toremove a full-width shelf when the fresh

food compartment door cannot be opened

fully, lift the rear of the shelf, pullfin'ward and down, tilt the shelf andtake it out.

Spillproof Shelves (onsomemodels)

Spillproot shelxes haxe special edgesto hel I) prexent spills from dripping

to lower shelxes. To i'eillO_,e 0I" replacethe shelxes, see the aboxe insttuctions.

About the freezer compartment shelves. .CEApplia.ces.com

Some models have an ice-tray shelf and some have a full-width step shelf.

Ice- Tray Sheff

To remove the ice-tray shelf, lift the left

side of the shelf off its supports, thenpull the shelf to the left to fl'ee it of the

plug supports. Pull the shelf to the rightto free the pins fl'om the holes in thecabinet wall.

Step Shelf

To remove the step shelf."

[7] i,ifl left side oI shelf slightly:

_ iVlo_e shelf to the left to fl'ee its rightends ti'om holes in the cabinet w_iil.

I,ower right side of shelf, mine shelf to[] the right and rake it out.

To replace the step shelf."

[_ _ ith shelf tilted as shown, tit left endsof shelf into holes in cabinet wall.

_I,ifl left side of sheff slightly, swing shelfup, fit right ends of shelf into holes incabinet wall, and lower shelf into place.

About the storage drawers.

Not all features are on all models,

Fruit and Vegetable Drawers

Excess water that may acctmmlate in thebottom of the drawers should be emptiedand the drawers wiped dry.

Snacks Drawer

The snacks drawer can be moved to the

most useflfl location Ira" wmr tamilv'sneeds.

About storage drawer and cover removal.

Not all features are on all models.

Humidity Control

HIGH LOW

Adjustable Humidity Drawer (onsomemodels)

Slide the control all the way to the Slide the control all the way to the LOWHIGHsetting to proxide high humidity _settino-_ to proxide lower humidit_ lexels

recommended flw most xegetables, recommended for most fruits.

Drawer and Cover Removal

Drawers can be removed easily by grasping

the sides and lifting up slightly while

pulling (h'awe_ past tile stop location.

Full-Width Drawer with Plastic Cover

To remove the cover, lift it off its supports,

pull it forward, tilt it and take it out.

Twin Drawers with Glass Cover

To remove:

[_ Remoxe tile drawers,

_ Reach in, push tile front of glasscoxer up, and at tile same time,

pull it forward as tar as it will conle.

Tilt it and take it out. Avoid cleaning tile

cold glass cover with hot water becausethe extreme temperature difference mayCatlse it to break.

_] Remoxe the drawer frame. (AlwaxsrelllOXe tile glass cover before you

take out the drawer frame.)

I,itt tile fl'ame off tile supports at each

side and back, pull it fi_rward, tilt it and

take it out.

To replace:

_I,ower the frame until it rests on thesupports at each side and back.

_Replace tile glass coxer, i)ushing itsrear edge fir_nl)into tile rear f_ame

channel and gentl) lowering tile front

into place.

_]Replace the drawers.

10

About the automatic icemaker, vvvvw.GEAppliances.com

A newly-installed refrigerator may take 12to 24 hours to begin making ice.

Power

,i w,tc, : ii i ii I

GI;00 iIPowerLight

Power switch model

Feeler Arm inthe STOP

FeelerArm in (up)position

Automatic Icemaker (on some models)

The icemaker will l)rodu('e seven ctlbes

per cycle-approximately 100-130 cubes

in a 24-hour period, depending oil

fl'eezer compartment temperature,

I'OOII/ teilll)erattli'e _ ntlillber of door

openings and other use conditions.

There are two b'pes of icemakeIs: po_vr

switch models and feeler aml models.

If the refl'igerator is operated befi)re

the water connection is made to the

, set the power switch to 0 (off)

or move the feeler arm to the STOP(up)

position.

When the refl'igerator has been

connected to the water supply, set the

power switch to the I (0n) position or move

tile feeler arm to the ON (down) position.On power switch models, the green light

the.ON(down) will come on.p0sm0n

You will hear a buzzing sound each timeFeelerarm model the icemaker fills with water.

The icemaker will fill with water when

it cools to ] 5°F. A newly-installed

refl'igerator may take ] 2 to 24 hours

to begin making ice cubes.

Throw awav the first tew batches of ice

to allow the water line to clear.

Be sure nothing interti_res with the

sweep of the ti_eler arm.

When the bin fills to the level of the

feeler arm, the icemaker will stop

producing ice.

It is normal for several cubes to be joined

togeth er.

If ice is not used fl'equentl> old ice cubes

will become cloud> taste stale and shrink.

On power switch models, the green power

light will blink if ice cubes get stuck in the

icemaker. To correct this, set the power

switch to 0 (Off)and retnove the cubes. Set

the power switch to I (0n)to restart tileicemaker. _dter the icemaker has been

turned on again, there will be a delay ofabout 45 minutes before the icemaker

I'estIIlles ol)ei'ation.

NOTE:In homeswith lower-than-averagewaterpressure,youmayhear theicemakercyclemultiple times whenmakingonebatchof ice.

Icemaker Accessory Kit

If your refi'igerator did not already come

equipped with an automatic icemaker,

an icemaker accessory kit is available at

extra cost.

Check the back of the refl'igerator flit

the specific icemaker kit needed ti)r your

model.

11

Care and cleaning of the refrigerator.

Cleaning the Outside

The door handles and trim (on sonle

models). Clean with a cloth (laml)ened

with soapy water: Dry with a sott ch)th.

Keep the outside clean. Wipe with a clean

cloth lightly dampened with kitchen

appliance wax or mild liquid dishdetergent. Dry and polish with a clean,soft cloth.

The stainless steel panels and door handles

(on solne models) can be cleaned with

a commercially available stainless steel

cleaner. Do not use appliance wax or

polish on the stainless steel,

Do not wipe the refr/_Teratorwith a soiled dish

cloth or wet towel Thesemay leave a residue

that can erode the pain_ Do not use scour/bg

pads, powdered c/eanera, bleach or cleaners

containing bleach because these products can

scratch and weaken the paint f/b/sh.

Cleaning the Inside

Tohelp prevent odors, leave an open be,×

oI baking soda in the fi'esh food andfreezer COill[)}l i'till en [s.

Unplug the refrigerator before cleaning.

If this is not i)ra(tical, wring excess

i/loisttlre Oil[ of sponge or cloth whencleaning arollnd switches, lights orcontrols.

Use wam_ water and baking soda solution-

about a tablespoon (l 5 ml) of baking sodato a quart (1 liter) of water. This bothcleans and neutralizes odm_. Rinse and

wipe dry.

After cleaning the door gaskets, apply athin laver of petroleum .jelly to the door

gaskets at the hinge side, This helps kee I)the gaskets fl'om sticking and bending

out of shape.

Avoid cleaning cold glass shelves {on somemodels) with hot water because the extreme

temperature difference may cause them to

break. Handle glass shelves carefully Bumping

tempered glass can cause it to shatte_

E-viterde nettoyer /es tab/ettes en verre froides

(sur certa/ns modSles) 8 l'eau chaude paine que

/'6cart de temperature extreme risque de/es

craquer Man/pu/er /es tab/ettes en verre avec

precaution. Le verre tremp6 soumis 8 un chocrisque de se fracasset:

Do not wash any plastic refrigerator parts inthe dishwashe_

Cleaningthecondensercoils.

Condenser

There is no need Ira" routine condenser

cleaning in normal home operatingenvii'onillents. However, in enviFoni//ents

that mav be particularly dusty or greasy;the condenser should be cleaned

periodically fi)r efficient refl'igeratoroperation,

To clean the condenseL tm'n the

temperatm'e control dial to 0. Sweep_I_V_IV OI" V_IC[I[II// l1 I) dust.

For best results, use a brush speciallydesigned Ira" this puri)ose. It is available

at most appliance parts stores.

12

vvww.GEAppliances.com

Behind the Refrigerator

Be careful when moving tile refrigerator

away from the wall. All types of floor

coverings can be dmnaged, particularly

cushioned coverings and those with

ei/lbossed S/lI'J[_lces,

Tm'n tile leveling legs at each fl'ont corner

of the reflJgerator counterclockwise tmtil

the rolle_ support the refrigeratm; Pull the

refrigerator straight ()/it and return it to

position by pushing it straight in. Moving

tile refrigerator in a side direction may

result in damage to the floor covering or

rellJgeratoi:

When pushing the refrigerator back, make sure

you don't roll over the power cord or icemaker

supply line (on some models).

En poussant le r_frig_rateur en place, vei/ler _ ne

pas le fake rouler sur le cordon d'alimentation ou

la canalisation d'eau de la machine _ gla_ons(sur certains modules).

After rolling tile refl'igerator back into

place, mrn the legs clockwise tmtil the

legs again bear the weight of the

refl'igera tot.

Light Bulb Replacement

To replace a burned-out bulb, unplug

the refl'igerator fl'om its electrical outlet,

unscrew tile bulb when cool and replace

it with an appliance bulb of tile same or

lower wattage.

Turningthe control to the0 positiondoesnotremovepower to the hghtcircuit

Preparing for Vacation

For long va(-ations or absen(es_ reillove

food and mq)lug tile refl'igerator. Move

tile temperatm'e control dial to tile 0

position, and clean the interior with a

baking soda solution of one tablespoon

(l 5 ml) of baking soda to one qtlart

(l liter) of water, i,eave tile doors open.

Set tile icemaker power switch to tile

0 (off) position or move tile fl_eler arm to

tile STOP (up) position (depending on

model) and shut off tile water supply to

tile refrigerator;

If tile temperature can drop below

fl'eezing, have a qualified servicer drain

tile water supply systeln (on some

models) to prevent serious property

damage due to flooding.

Preparing to Move

Secure all loose items such as grille,

shelves and drawers by taping them

secm'ely in place to prevent damage.

Be sure the refngeretor stays lb an upright

position during moving.

13

InstallationInstructions

RefrigeratorModels 16,17, 18

Questions?Call 800.GE.CARES(800.432.2737)orVisitomX_ebsite_,t:www.GEAppliances.comIn Canada,call 1.800.361.3400or visit our _Vebsite at: www.geappliances.ca IBEFORE YOU BEGINRead these instructions completely mad carefully,

• IMPORTANT - theseinstHIctions for local inspector's use.

• IMPORTANT - Obse,,'e ,llgoverning codes and ordinances.

• Note to Installer - Be sure to leave these

instHIctions with tile Consumer.

• Note to Consumer - KeeI) these instructionsti)r fllture reference.

• Skill level - Installation of this appliance requiresbasic mechanical skills.

• Completion time - Reli'igerator Installation15 minutes

Reve_ing the Door Swing1 hour

• Proper installation is tile responsibility ot tileinstalleL

• Product failure due to improper installation is notcovered under tile _'arranm

WATER SUPPLY TO THE ICEMAKER(on some models)

If tile refrigerator has an icemaker, it will have to be

connected to a cold water line. A water sui)ply kit

(containing COl)per tubing, shutott valve, fittings and

instHictions) is awfilable at extra cost fl'om yore" dealer,

by visiting ore" Website at www.GEAppliances.com (in

Canada at www.geappliances.ca) or from Parts and

Accessories, 800.626.2002 (in Canada 1.888.261.3055).

REFRIGERATOR LOCATION

• Do not install tile refl'igerator where tile temperaturewill go below 60°F (l 6°C) because it will not _tm ()Denenough to maintain proper temperatures.

• Install it on a floor strong enough to sui)port it fldlvloaded.

CLEARANCES

") ) " (* " " s "( of installation,_Mlow tile fl 11( wm_ cle,mmce; f )r ease

proper air circulation and I)lumbing, and electricalCoIlIlectioIIs.

zt• Sides./4 (19 ram)

• Top 1" (25 ram)

• Back 1" (25 ram)

ROLLERS AND LEVELING LEGS

Leveling legs near each fl'ont corner of tile refl'igerator

are a(!justable. They firmly position tile refl'igerator

and prevent it fl'om moving when tile doors are

opened. I,eveling legs should be set so the fl'ont of the

refl'igerator is raised just enough that tile doors ch)se

easily when opened about hall\ray.

Turn tile leveling legs clockwise to raise tile

refl'igerator, counterclockwise to lower it.

Rollersnext to tile leveling legs allow you to move tilereii'igerator away from tile wall tot cleaning.

Turn the legs co/mterclockwise until the weight of the

refl'igerator is transterred from them to tile rolle_.

_Mter rolling tile refl'igerator back into place, turn tile

legs clockwise until the legs again bear the weight of

tile refl'igera tot.

14


ill INSTALLING THE WATER LINE CONSOMEMODELS)

BEFORE YOU BEGIN

Reconm_ended copper water supply kits are _4UXSX2,

_X8X3 or _X8X4, depending on the amom_t oftubing you need. Approved plastic water supply lines

are GE SmartConnect ''_ Refrigerator Tubing(WX08X10002, WX08X10006, WX08X10015 and_43X08X 10025).

When connecting your refrigerator to a GE Reverse

Osmosis Water System, the only approved installationis with a GE RVEfit. For other reverse osmosis water

s}_stems, follow the manufi_cturer's recommendations.

This water line installation is not warranted by the

refrigerator or icemaker manufi_cturer. Follow theseinstructions carefldlv to minimize the risk of expensive

water damage,

_4'ater hammer (water banging in the pipes) in houseplmnbing can cause damage to refl'igerator parts andlead to water leakage or flooding. Call a qualified

plmnber to correct water hammer before installingthe water supply line to the refl'igerator,

To prevent burns and product damage, do not hookup the water line to the hot water line.

If vou/lse gOllY refl'igerator before connecting the

water line, make sm'e the icemaker power switch isin the 0 (off) position (on power switch models) or

the feeler arm is in the STOP (up) position (on teelerarm models).

Do not install the icemaker tubing in areas where

temperatm'es tall below fl'eezing.

When using any electrical device (such as a power

drill) during installation, be sm'e the device is double

insulated or grounded in a manner to prevent the

hazard of electric shock, or is battery powered.

All installations must be in accordance with local

plmnbing code requirements.

WHAT YOU WILL NEED

• Copper or GE SmaxtCmmecf'" Refrigerator Tubing

kit, 1/4" outer diameter to connect the refrigerator

to the water supply: If using COl)per, be sm'e both

ends of the tubing are cut square.

To determine how much tubing you need: measure

the distance from the water valve on the back of the

refrigerator to the water supply pipe. Then add 8'

(2.4 m). Be sure there is sufficient extra tubing

(about 8' [2.4 m ] coiled into 3 turns of about l 0"

[25 cm] diameter) to allow the refl'igerator to moveout fl'om the wall after installation.

GE Smart(_onnect _'_Refrigerator Tubing 14dts are

available in the fi)llowing lengths:

2' (0.6 m) - WX08X10002

6' (1.8 m) - WX08X10006

15' (4.6 m) - WX08X10015

25' (7.6 m) - WX08X10025

Be sure that the kit wm select allows at least 8' (2.4 m)as described above.

NOTE: The mtiy GE approved plastic tubing is that

supplied in GE SmartConnect'" Refrigerator Tubing

kits. Do not use any other plastic water supply line

because the line is under pressure at all times. Certain

types of plastic will crack or rupture with age and

cause water damage to your home.

15


B INSTALLING THE WATER LINE (CONT.)

WHAT YOU WILL NEED (CONT.)

• AGE water supply kit (containing tubing, shutoff

valve and fittings listed below) is available at extra

cost fl'om your dealer or fl'om Parts and Accessories,

800.626.2002.

• A cold water supply. The water pressm'e must be

between 20 and 120 p.s.i. (1.4-8.1 bar).

• Power drill.

• 1/2" or adjustable wrench.

• Straight and Phillips blade screwdriver.

• Two 1/4" outer diameter compression nuts and2 ferrules (sleeves)--to connect the copper tubing

to the shutoff valve and the refl'igerator water valve.

OR

• If you are using a GE SmartConnect '_ ReflJgeratorTubing kit, the necessary fittings are preassembled

to the tubing.

• If wmr existing COl)per water line has a flared fitting

at the end, you will need an adapter (available atphunbing supply stores) to connect the water line to

the reli'igerator OR wm can cut off the flared fittingwith a tube cutter and then use a compression

fitting. Do not cut formed end from GE

SmartCmmect _'' Reli'igerator tubing.

• Shutoff valve to connect to the cold water line.The shutoff valve should have a water inlet with a

minimmn inside diameter of 5/32" at tile point of

connection to the COLD WATER LINE. Saddle-typeshutoff valves are included in many water sui)ply kits.Before i)urchasing, inake sure a saddle-type wdve

complies with wmr local plmnbing codes.

Install the shutoff xalxe on the nearest frequentl) used

drinking water line.

[] SHUT OFF THE MAIN WATERSUPPLY

Turn on the nearest fimcet long enouoh_ to clear

the line of water.

[] CHOOSE THE VALVE LOCATION

Choose a location fin" the valve that is easilyaccessible. It is best to connect into the side of

a vertical water pipe. When it is necessary to

connect into a horizontal water pipe, make theconnection to the top or side, rather than at the

bottom, to avoid drawing off any sediment fl'omthe water pipe.

[] DRILL THE HOLE FOR THE VALVE

Drill a 1/4" hole in the water pii)e (exen it using

a sell:piercing xalve) using a sharp bit. Remoxe anx

btu'I5 resulting from drilling tile hole in the I)ipe.

Take care not to allow water to drain into the drill,

Faihu'e to drill a 1/4" hole may result in reduced

ice production or smaller cubes.

16


[] FASTEN THE SHUTOFF VALVE

Fasten the shutotI _al_e to the cold water pipe withthe pipe clamp.

PipeClamF

Saddle-Type--ShutoffValve

-- VerticalColdWater Pipe

NOTE: Conmlonwealth of Massachusetts PlumbingCodes 248CMR shall be adhered to. Saddle wflves

are illegal and use is not permitted in Massachusetts.Consult with wmr licensed plumber.

[] TIGHTEN THE PIPE CLAMP

Tighten the clamp screws until the sealing washerbegins to swell.

NOTE: Do not overtighten or vou mav cHIsh the

tubing.

-Washer

Pi End

Clam[

[] ROUTE THE TUBING

Route the tubing between the cold water line andthe refl'igerator.

Route tile tubing through a hole drilled in the wallor floor (behind the refl'igerator or a(!iacent base

cabinet) as close to the wall as possible.

NOTE: Be sure there is sufticient extra tubing

(about 8 ti_et [244 cm] coiled into 3 turns of about10" [25 cm] diameter) to allow the refl'igerator tomove out fl'om the wall alier installation.

[] CONNECT THE TUBINGTO THE VALVE

Place the compression nut and ferrule (sleexe)for COl)per tubing onto tile end of the tubing andconnect it to the shutott xalxe.

Make sure the tubing is flfllv inserted into the

wove. Tighten the compression nut securely.

For plastic tubing fl'om a GE SmartConnect'"Refl'igerator Tubing kit, insert the molded endof the tubing into the shutoff wove and tighten

compression nut until it is hand tight, then tightenone additional turn with a wrench. OvertighteningIllaV ca[Ise leaks.

Saddle-TypeShutoffValve

?ressionNut

SmartConnect_Tubing

Packing Nut.

Outlet Valve-- --Ferrule (sleeve)

NOTE: Commonwealth of Massachusetts PlumbingCodes 248CMR shall be adhered to. Saddle wflves

are illegal and rise is ilot permitted in Massachusetts.Consult with wmr licensed i)lumber.

[] FLUSH OUT THE TUBING

Turn the main water sui)ply on and flush ()tlt the

tubing until the water is clear.

Shut the water ott at the water valve alter about

one quart (l liter) of water has been flushed

through the tubing.

17


B INSTALLING THE WATER LINE (CONT.)

[] CONNECT THE TUBING TO THEREFRIGERATOR

NOTES:

• gefl)re making tile connection to tile refrigerator,be sure tile refrigerator, power cord is not I_lugged,,into tile wall outlet.

• We recommend installing a water filter if wmrwater sui)ply has sand or particles that could clog

the screen of the reti'igerator's water wdve. Installit in the water line near the retiigerator. If using

GE SmartConnect'" Reliigerator Tubing kit,wm will need an additional tube (WX08X10002)

to connect tile filte_: Do not cut plastic tube toinstall filter.

RelllO_,e tile access co_,er.

Remoxe tile plastic flexible cap from tile water;al;e (refrigerator connection).

©

Place tile compression nut and ti_Hule (sleeve)onto the end of the tubing as shown. On GE

SmartConnect'" Refl'igerator Tubing kit,

the nuts are ah'eadv assembled to the tubing.

Insert tile end of tile tubing into tile water wdveconnection as flu" as possible. While holding the

tubing, tighten tile fitting.

For plastic tubing from a GE Slnart(_onnect '_

Refrigerator Tubing kit, insert tile molded endof the tubing into the shutoff valve and tighten

compression nut tmtil it is hand tight, thentighten one additional tm'n with a wrench.

Overtightening may cause leaks,

[] CONNECT THE TUBING TO THEREFRIGERATOR (CONT.)

Fasten tile tubing into tile clamp provided tohold it in a vertical position. You may need to

pry open tile clamp.

1/4" Copper_ -- TubingClampTubing

1/4" CompressionNut

Ferrule(sleeve)

RefrigeratorConnection SmartConnect_

Tubing

Reattach tile access cover.

€lp_

[] TURN THE WATER ON AT THESHUTOFF VALVE

Tighten any connections that leak.

Reattach tile access cover.

18


[] PLUG IN THE REFRIGERATOR

A_rranoe the coil of tubing so that it does not _ibratea

against the back of the refrigerator or against the

wall. Push the refrigerator back to the wall.

START THE ICEMAKER

On power switch models, set the icemaker power

switch to the I (on) position. On feeler arm models,

move the feeler arm to the ON (down) position. The

icemaker will not begin to operate until it reaches

its operating temperature of 15°F (-9°C) or below.

It will then begin operation automatically.

Powerswitch model

////

FeelerArmintheJ STOP(up)position

in

theON (down)position

Feelerarmmodel

NOTE: In lower water pressure conditions, the

water xalxe ma_ turn on up to 3 times to delixer

enough water to the icemaker.

B REVERSING THE DOOR SWING

IMPORTANT NOTES

\,_l_en re\'e_'sing the door swing:

• Read the inst_ uctions all the way through before

starting.

• Handle parts carefldly to awfid scratching paint.

• Set screws down by their related parts to avoid usingthem in the wrong places.

• Provide a non-scratching work surface fin"the doors.

IMPORTANT: Once wm begin, do not move the

cabinet until doo>swing reversal is completed.

These instructions are for changing the hinges fl'om

the right side to the left side--if wm ever want to change

the hinges back to the right side, follow these same

inst_ uctions and reverse all references to left and right.

TOOLS REQUIRED

Phillipsscrewdriver

5/16" he>headsocketdriver

Putt_ knitS: or thin-blade screwdrix er

Maskingtape

T20 or T25 Torxdriver,(Needed for some models)

5/16" open-endwrench

19


B REVERSING THE DOOR SWING (CONT.)

[] BEFORE YOU START

1.1 UnI_lug the refrigerator fl'om its electricaloutlet.

2.2 X4ith a :5/16" hex-head socket dfixer, remoxe the

screws that hold the top hinge to the cabinet,

1.2 Erupt)all door shelxes, including the dairy

C OIlll)_l I'tIll ent.

CAUTION: Do not let either door drop to the

floor, To do so could dail/aoe_ the door stop,

2.3 I,ift the hinge (and the shim glued to it) straight

up to free the hinge, pin from the socket in

the top of the door and set it aside, ahmg withits screws.

Top Hinge -----_1 _

2.4 Remo_e the tape and tilt the door awa_ from the

cabinet. I.iti it off the center hinge pin.

[] REMOVE THE FREEZER DOOR

2.1 Tape the door shut with maskino. _ tape.

2.5 Set the door on a non-scratching surface with

the outside up.

2.6 Transter the 2 screws from the opposite side ofthe cabinet to the screw holes _acated 1)_ the

top hinge removal.

2O


[] REMOVE THE FRESH FOODDOOR

3.1 Tape the door shut with maskin,,. _ tape.

[] REMOVE THE FRESH FOODDOOR (CONT.)

3.4 Set the door outside-up on a non-scratchingS/IIS{_Ice.

3.2 Using a 5/16" hex-head socket screwdriver anda 5/16" open-end wrench, remove the two

screws holding the center hinge (and the shimglued to it) to the cabinet. I,ifl the center hinge

to ti'ee its pin from the socket in the top of thedoo_; and set hinge and screws aside. Be careful

not to lose the center hinge spacer mad washer.

3.3 Remove the tape and tilt the door away fl'om thecabinet. I,ifl the door fl'om the pin in the bottom

hinge bracket. (If the plastic washer sticks to thedoor bottom, put it back on the hinge.)

3.5 Tmnsfi_r the two screws fl'om the opposite side ofthe cabinet to the screw holes _acated b_ the center

hinge removal.

3.6 Transter the _asher (if your model has one) to theopposite side.

3.7 Take one (ff the screws removed in step 9 and startit in the outem_ost screw hole on the opposite side.

Do not drive it all the way down-leave enoughspace under the screw head ti_r thickness of shimand bracket.

IJ

2/



[] REVERSING THE HARDWARE

4.1 Remove the base ,,rille (if' _our refrigerator has

one) b) pulling it straight out.

J

4.2 Mo_,e the bottom hinge bracket (and shim glued

to it) and plastic washer from the right side to theleii side.

Plastic PlasticWasher Washer

Hinge--) --_Bracket Hinge

Bracket

Models with a hinge bracketthat has 2 screw holes.

Modelswith a hingebracketthat has4 screwholes.

Switchthe hinge pinto theoppositeside of the bracket.

4.3 Interchange hinge (and the shim glued to it) and

screws at top right with screws at top left of cabinet.

Do not tighten screws on hinge side at this time,

Installing the hinge on the left. Installing the hinge on the right.

NOTES:

• Some hinges have fl)ur holes. Which holes you

use fi)r installing the hinge depends on which

side wm install the hinge.

• The outer edge of the hinge should be parallel

to the edge of the case fl)r correct installation.

[] REVERSING THE DOOR HANDLES

5.1

Plug'_

Transfer fresh food door handle

5.1.1 Remove the handle plug using a

tape-tipped putty knife under the edge,and i'eillove the scI'ew tlndei'neath,

Remove the two screws holding the

handle to the top of the door.

I 5.1.2 Remoxe the handle. I5.1.3 Remoxe the screws fl'om the right edge of the

door top and insert them into the handle screw

holes on the opposite side.

5.1.4 With tape-tipped putty knife or thin-blade

screwdriver, P_T out the plug button from the

hinge hole on the lett side of the door and

insert it into the hole on the opposite side that

was vacated by remowfl of the top hinge.

Plug Bu__

22


I_REVERSING THE DOOR HANDLES(CONT.)

5.1 Transfer fresh food door handle

(cont.)

5.1.5 Pull the plug button fl'om the frontof the door and transfer it to the

opposite side.

PlugButtonToreattachthehandleontheoppositeside.

5.2 Transfer door stop

5.2.1 Move the metal door stop from the right

end to the leii end.

Left Side D;0r Stop

5.2.2 Move any screws from the lett end to

the right end.

RightSide

5.3 Reinstalling the Fresh Food DoorHandle

5.3.1 Attach the handle to

the right side of thedoor with screws at

the top and under

the handle plug,

5.3.2 Reinstall the handle plug.

5.4 Transfer Freezer Door Handle

5.4.1 Remove the screw holding the handle to the

top of the door and the two screws holding

the handle to the bottom of the door,

5.4.2 Remove the handle.

5.4.3 Remove the screw fl'om the right top edge of thedoor and insert it into the handle screw hole on

the leti side,

I5.4.4 Transli_r the door stop as shown on thepreceding page.

5.4.5 Attach the handle to the right edge of the doorwith screws at top and bottom, using bottom

holes w_cated bv remowfl of the door stop screws.

I

23



16IREHANGING THE DOORS

6.1 Rehang the fresh food door6.1.1 I,ower the ti'esh food door onto the

botton_ hinge, pin. Be sure the washer

is in place on the pin.

WasherBracket


PlasticWasher

Bracket % ©


[] REHANGING THE DOORS (CONT.)

6.2 Rehang the freezer door6.2.1 I,ower the freezer door onto the center

hinge, pin. Be sure the washer and

spacer are in place on the pin.

gePin

and Spacer

6.1.2 Insert the pin on the center hinge into the

socket in the top of the door. Place the spacer,

then the washer, on the hinge pin.NOTE: The center hinge must be turned overas shown when mounted on the lefi side.

Hinge,_,

and Spacer

6.1.3 Tilt the door toward the cabinet. As the door is

brought into position, slide the hinge trader the

head of the screw which earlier had been partlydriven into the outemmst hole. Insert the

remaining scre_, then tighten both screwssecurely.

6.2.2 Tilt the door toward the cabinet, lifting the top

hinge so the pin fits into the socket on the topof the door.

6.2.3. Make sm'e the door is slightly above the top of

the cabinet and the gap between the doors is

even across the front. Tighten the top hinge

screws. Do not overtighten these screws-tighten

them until they are just snug, then tm'n them

another one-half turn.

24

Normal operating sounds, vvww.GEAppliances.com

Newer refrigerators sound different from older refrigerators. Modern refrigeratorshave more features and use newer technology.

Do you hear what I hear? These sounds are normal.

HUMMM...-- WHOOSH...

• The new high effidency compressor may Hm thster

and hmger than wmr old refl'igerator and wm may

hear a high-pitched hmn or pulsating sound while

it is operating,

• You may hear a whooshing sound when the (lom_ close,

This is due to pressure equalizing within the refl'igeratoi;

CLICKS, POPS,CRACKS and CHIRPS

• You may hear cracking or i)oi_ping somads when the

refl'igerator is first i)lugged in. This hal)pens as the

i'e[Yigei'ator cools 1o the correct [ellli)erattlre.

• The compressor may cause a clicking or chirping

sound when attempting to restart (this could take

up to 5 minutes).

• Expansion and contraction of cooling coils during

and after defrost can cause a cracking or i_oi_pingsound.

• On models with an icemake_; after an icemaking

cycle, you may hear the ice cubes dropping into

the ice bucket.

WHIBI

• You may hear the rims spinning at high speeds.

This hai_pens when the refrigerator is first i)luggedin, when the doors are opened frequently or when

a large amotmt of fired is added to the refrigeratoror freezer comi_artments. The rims are helping to

maintain the correct temperatures.

WATERSOUNDS

6• The flow of refl-igerant through the fl'eezer cooling

coils may make a gm'gling noise like boiling water.

• Water dropping on the defl'ost heater can cause a

sizzling, I_oI_ping or buzzing sotmd dm'ing the

defrost cycle.

• A water ddpping noise may occur during the defrost

cycle as ice melts from the evaporator and flows into

the drain pan.

• Closing the door mav cause a gurgling sotmd due to

pressure equalization.

25

Before you call for service...

Troubleshooting TipsSave time and money/. Review the charts on the followingpages first and you may not need to call for service.

Possible Causes What ToDo

Refrigerator does not Refrigerator in defrost cycle. * Wait ablaut 30 minutes t(n" (left'()st cycle to end.

operateTemperature control dial * Move tile temperature control dial to a temperatm'e

in 0position. settiuRefrigerator is unplugged. * Push the pltlg c(m/pletely iut_) the _mfl et.

The fuse is blown/circuit * I_eplace fl/se (>r reset the breaker.

breaker is tripped.

Vibrationorrattling Roller screws or leveling legs * See" Rollersand LevelingLegs.(slightvibration need adjusting.is normal)

Motor operates for Normal when refrigerator '* Wait 24 horns fin" tire refiigerator to completely

long periods or cycles is first plugged in. c_)ol (h)wu.on and off frequently.

Often occurs when large * This is uom_al.(Modern refrigeratorswith more storage amounts of food are

space and a larger placed in refrigerator.

if )acka,,e is holding door open.freezer require more Door left open. * Check to see l

operatingtime.Theystart and stop often Hot weather or frequent * This is uoY/r/;ll.to maintain even door ope_mlgs.

temperatures.) Temperature control dial * SeeAbout the temperaturecontrol dial.set at the coldest setting.

Grille and condenser * See Care and cleaning.

need clem_hzg.

Freshfoodorfreezer Temperature control dial * See About the temperaturecontrol dial.compartmenttoowarm not set cold enough.

WaJ_n weather or frequent * Set tire temperature control dial oue step (olde_:

door ope_fings. See About the temperaturecontrol dial.

if )acka,,e is holding door open.Doorleft open. * Check to see 1

Package blocking air duct in * Check to see if l)ackage, is bhwkiug air duct in t]'eezei"

freezer compartment, c_ )lill)_lYtlileUt.

Frostorice crystals Door left open. • ('.heck to see if package is holding door open.onfrozenfood(frostwithinpackage Too frequent or too long

is normal) door ope_fings.

26

vvww.GEAppliances.com

Automatic icemakerdoes not work

(on some models)

Possible Causes

Icema_ker power switchis not on.

What ToDo

• On power switch models, set the power switch to the

I (On)position. On feeler aI_n inodels, In(we the reeler

aml to the ON (down) position.

Water supply turned off or • See Installing the water line.not comlected.

Freezer compartment • Wait 24 hotn_ fl)r the refiJger;m)r to (()mpletelytoo warlTL cool (lowu.

Piled up cubes in the storage • l,evel cubes by hand.bin cause the icemaker

to shut off.

Frequent "buzzing"sound lcemaker is on but the water • Ttu'n the icemaker oIt_ On l)ower switch models, set the

supply to the refrigerator has power switch to the 0 (off) l)osifion. On feeler all_

not been com_ected, models, move the teeler a_ln to the STOP(up)position.

Keel)lug it on will damage the water \ulve.

Cubes too small Water shutoff valve comlecting • (',;ill the pltmd_er to clear the valve.

refrigerator to water line may

be clogged.

Slow ice cube freezing Door left open. • Check to see if l)ackage, is holding door ol)en.

Temperature control dial • See About the temperature control dialnot set cold enough.

Ice cubes have Ice storage bin needs clemfing. • Empty and wash bin. Discard old cubes.

odor/tasteFood trmlsmitthlg odor/taste • _Ya l) foods well.to ice cubes.

Interior of refrigerator • See Care and cleaning.needs cleaning,

Moisture forms on Not mmsual during • _'il)e stu'fil('e (li T and reset teuq)erattn'e control dial

cabinet surface periods of high humidity, one setting colder;between the doors

Moisture collects inside Too frequent or too

(in humidweather,air long door opelfings.carries moisture into

refrigerator when doors

are opened)

Refrigeratorhasodor Foods trm_smitth_g • F()ods with strong od(_x_ sh()tdd be tightly wral)l)ed.

odor to refrigerator. • Kee l) ;Ill ol)eu box of bakiug soda ill the refrigerator;

replace evel'v three ul()uths.

Interior needs cleaning, • See Care and cleaning.

27

CONSUMER WARRANTY(for customers in Canada)

Your refrigerator is warranted to be free of defects in material and workmanship.

i

What is covered How Long Warranted Parts Labour(From Date of Sale) Repair or Replace

at Camco's Option

Compressor Five (5) Years Five (5) Years Five (5) Years

Sealed System (including Five (5) Years Five (5) Years Five (5) Yearsevaporator, condensertubing and refrigerant)

All Other Parts One (1) Year One (1) Year One (1) Year

TERMS AND CONDITIONS:

This warranty applies only for singlefamily domestic use in Canada when theRefrigerator has been properly installedaccording to the instructions supplied byCamco and is connected to an adequateand proper utility service.

Damage due to abuse, accident, commercialuse, and alteration or defacing of the serialplate cancels all obligations of this warranty.

Service during this warranty must be performedby an Authorized Camco Service Agent.

Neither Camco nor the Dealer is liable for anyclaims or damages resulting from any failureof the Refrigerator or from service delaysbeyond their reasonable control.

To obtain warranty service, purchaser mustpresent the original bill of sale. Componentsrepaired or replaced are warranted through theremainder of the original warranty period only.

This warranty is in addition to any statutorywarranty.

WHAT IS NOT COVERED:

• Service trips to your home to teach you howto use the product.

• Damage to finish after delivery.

• Improper installation--proper installationincludes adequate air circulation to therefrigeration system, adequate electrical,plumbing and other connecting facilities.

• Replacement of house fuses or resetting ofcircuit breakers.

• Replacement of light bulbs.

• Damage to product caused by accident, fire,floods or acts of God.

• Loss of food due to spoilage.

• Proper use and care of product as listedin the owner's manual, proper setting ofcontrols.

• WARRANTOR IS NOT RESPONSIBLEFOR CONSEQUENTIAL DAMAGES.

IMPORTANT

Keep this warranty and your bill of sale as proof of original purchase and purchase date.

Camco Service is available coast to coast.If further help is needed concerning this warranty, contact:

Manager, Consumer Relations, Camco Inc.,Suite 310, 1 Factory Lane, Moncton, N.B. ElC 9M3

28

GE Service Protection Plus rM

GE, a name recognized worldwide _br quality and dependability', offers y'ouService Protection Plus'"-comprehensive protection on all y'our appliances-No Matter What Brand!

Benefits Include:

• Backed by GE• All brands covered

• Unlimited service cars

• All parts and labor costs included

• No out-of-pocket expenses• No hidden deductibles

• One 800 number to call

We71CoverAny Appliance.Anywhere. Anytime.*

You will be c()mpletel} satisfied with our serxice protection or you may request }our inonev back

on tile remaining xalue of _o/u" contract. No questions asked. It's that simple.

Protect vom" refl_igerat(m dishwasher; washer and chTe_; range, TV, VCR and much more-rely brand!

Plus there's no extra charge tot einergency service and low monthly financing is available. Even icemaker

coverage and tood spoilage protection is offered. You can rest easy, knowing that all vom" valuable

household products are protected against expensive repairs.

g'l _ _ lr_* Kit lr_* glz Kit glz_

Place your confidence in (IE and call us in tile U.S. toll-free at _tlU.OZO.ZZZ/-]:

for inoi'e infoi'u/ation,

*-M1lmmds cov<_<d, up Io 20 y<a_ old, in Ih< <onlinental U.S.

__ ( _'//l'l 1(2"(_ ............

Please place in envelope and mail to:

General Electric Company

Warranty Registration DepartmentEO. Box 32150

Louisville, KY 40232-2150

29

Consumer Product Ownership RegistrationDear Customer:

Thank you for purchasing our product and thank you for placing your confidence in us.

_A/e are proud to ha_e you as a customer!

Follow these three steps to protect your new appliance investment:

Complete mid mall

your Consmner

Product Owuership

Registration today.tla_e tile peace of

lllil/d of k/lowil/g" we

can cont_.ct you ill

th( unlikely (v(m o/a sa/;vw nlodi/i( ation.

AJlcr mailing the

registration below,S[()r(' ihis (to('[ll//(ql[

in a sa/;v pla(c. Itcontains inlbl'matJon

_r()_ will need should

you require service.()m: servi( c mHnber

in the USA is:

800 GE CAI@_S

(800.432.2737). InCanada: 1.888.880.3030.

[_('_td VO/IF Owner's

Mmmal carefully.

It will hel t ) you

opcram your newappliance t)rot)erly.

Model Number Serial Number

, , , , , , I I , , , , , , , I

Important: If you did not get a registration card with yourproduct, detach and return the form below toensure that your product is registered, or registeronline at www.GEAppliances.com.

._ Cut h_r_

Consumer Product Ownership Registration

Model Number Serial NumberI,,,,,, , , , , , I I , , , , , ,

MI: [ Ms. M*>,. Mi__,

Fir'q ] I L_sl ]Name I I I I I I I I I Nanle I I I I I I I I I I I I

SI r( (!1 IA&h-<ss I I I I I I I I I I I I I I I I I I I I I I I I

Ap,.#l, , , , , , , I E-lnailAddress*

l );ue Pla_ ed

Monlh

GEAppliances

GE Consttmer& ItMttstrial

Looisville, Kenttmk ywwv_GEAppliances, aom

_' Please provide your e-mail address to receive, via e-mail, special oilers and other important

communications troln GE Appliances (GEA).Check here if you do not want to receixe COlnmmlicafions fi-om GEA's carehflly selected partners.

FAILI 7RE TO (_OMPLETE AN[) RETI 7RN "FillS CARD DOES NOT DIMINISII Y()[ 7R

W.kRI_ \N'IT RIGI fFS.

For information about (;EA's privacy and data usage polic> go to w_v.(;EApplian( es.( om and click on

"Privacy Policy" or call 800.626.2224.

3O

Refrigerator Warranty. (Forcustomers in the United States)

Aft warranty service provided by our Factory Service Centers,or an authorized Customer Care® technician. To schedule service,on-line, 24 hours a day, vis# us at www.GEAppfiances.com, orcarl 800.GE.CARES(800.432.2737).

Staple your receipt here.Proof of the original purchase

date is needed to obtain service

under the warrantg

Fromthe date of theoriginalpurchase

Fromthe date of the

originalpurchase

GE Will Replace:

Any part of the reii_igerator which fifils due to a defect in materials or workmanship.

During this full one-year warranty, GE will also provide, free of charge, all labor

and in-home service to replace the defecfi\'e part.

Any part of the sealed refrigerating system (the compressoi; con(lensei; exaporatorand all com_ecfing tubiug) which fllils due to a defect iu inaterials or workmanship.

Dm_ing this full five-year sealed refrigeration system warranty, GE will also provide,free of charge, all labor and in-home service to replace the (lefi_('ti\'e part.

Service trips to your home to teach you how to use the

product.

Improper hlstallation, delivery or mah_tenm_ce.

Failure of the product if it is abused, misused, or used for

other thml the intended purpose or used commercially.

Loss of food due to spoilage.

Damage caused after delivery.

Replacement of house fuses or resetting of circuitbreakers.

Replacement of the light.

Damage to the product caused by accident, fire, floods oracts of God.

h_cidentaJ or consequential damage caused by possible

defects with this applimace.

This warranty is extended to the original purchaser and any succeeding owner for products purchased for homeuse within the USA. In Alaska, the warranty excludes the cost of shipping or service calls to your home.

Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty givesyou specific legal rights, and you may also have other rights which vary from state to state. To know what yourlegal rights are, consult your local or state consumer affairs office or your state's Attorney General

Warrantor: General Electric Company. Louisville, KY 40225

31

ConsumerSupport.

GEAppliancesWebsite 1. theu.s.: www.GEAppliances.comHave a question or need assist;race with your appliance? Try the (;E Appliances _.Vebsite 24 hom_ a da);

any clay _ff tile year'. For greater convenience and tilster selMce, you can now download Owner's Manuals,

order parts, catalogs, or even schedule se_Mce on4ine. You can also "_&skOre" Team _ff Experts ''''' your questions,and so much more... In Cmlada: www.geappfimlces.ca

ScheduleService i. theu.s.: www.GEAppliances.com

Expert (;E repair service is only one step awa_ fl'om yam" dam: Get on-line and schedule _om" service at yam"

comenience 24 hom_ an) day of tile xear! Or call 800.GE.(_ARES (800.432.2737) (lm_ing nmmal business hom_.

In Canada, call 1.800.361.3400

RealLifeDesignStudio i. theu.s.: www.GEAppliances.comGE supports tile Universal Design concept_products, services and enviromnents that can be used by people of allages, sizes and capabilities. X_'e recognize the need to design fi)r a wide range cff physical and mental abilities and

impaimmnts. For derails at GE's Universal Design applications, including kitchen design ideas tot people withdisabilities, check ()ut our X_'ebsite today. For the hearing impaired, please call 800.TDD.GEAC (800.833.4322).

In Canada, contact: Manage_; (_onsulner Relations, Camco, Inc.Suim 310, 1 Factory i,ane

Moncton, N.B. E 1C 9M3

ExtendedWarranties i,,theu.s.:www.GEAppliances.comPro'chase a (;E extended warrant}, and learn about special disco/mrs that are axailable while yore" warrant) is stillin effect, xd)u can pro'chase it on-line amfime or call 800.626.2224 dining natural business hom_. (;E (_onsumer

Home Se_Mces will still be there after )am" warrant} expires. In Cmlada, call 1.888.261.2133

PartsandAccessories 1,,theu.s.:www.GEAppliances.comIndividuals qualified to service their own appliances can have parts or a(-cessolJes sent directly to their homes(VISA, MasterCard and Discover cards are accepted). Order on-line tocla 5 24 hom_ ever}' day or by phone at

800.626.2002 during nomml business hom_.

Instructions contained in this manual cover procedures to be performed by any user.Other servicing generally should bereferred to qualified service personnel. Caution must be exercised, since improper servicing may cause unsafe operation.

C/IStOlllexN ill Cmlada should cons/llt tile yellow pages I_i)I" tile neaFest CalllCO service centei; or call 1.888.261.3055.

ContactUs i,,theu.s.:www.GEAppliances.comIf you are not satisfied with tile service you receive fl'om GE, contact us on ore" _'ebsite with all tile details

including yam" phone ntllllbeI; oi" write to: General Manage_; Customer ]?,elations

• GE Apl)liances, Apl)liance ParkI xmisville, KY 40225

In Canada: www.geapplimlces.ca, or write to: Directm; Consumer Relations, Camco, Inc.Stfite 310, 1 Factory Im_eMoncton, N.B. E 1C 9M3

RegisterYourAppliance i,, the U.S.: www.GEAppliances.comRegister your new applimlce on-lille--at your convenience[ Tinlely l)roduct registration will allow tin"

enhanced COlmmulication and prolnpt service under tile mrnls of p)tli" warrant},, should tile need alise.You may also mail in tile pre-pfinted registration card included in tile packing material.

In Canada: www.geapplimlces.ca

_' Printed in the United States

_' PrintedonRecycledPaper

wwvv.geappliancesmuni d'une fiche fi 3 broches (raise fi la terre) qui se branche darts une...

Documents