1 11

JB.2526 / Made in China. © KitSound™ 2013 Christchurch, Dorset. BH23 4FL

USER MANUAL

XDOCK2 CLOCK RADIO

SPEAKER DOCKkitsound.co.uk

2 3

We are craftspeople. We are musicians. We are KitSound™

And we all commit ourselves to achieving one shared goal: Bringing people closer to their music. By truly understanding music we stay true to its craft. Pure, rich, incredible sound. We’ll settle for nothing less.

4 5

At KS we believe your music deserves to be showcased on great quality products that don’t cost the earth. We might not all share the same taste in music (the ferocious disputes on music forums prove that), but whether it’s Irish folk, death metal or any number of obscure genres which seem to be multiplying by the minute, the artists responsible for connecting with you through their craft have bared their souls to do so. And we think that’s worth celebrating.

6 7

Box contents

• XDock2• AC adapter• Instruction manual

Functions

Top view1. Power/Mode 2. Menu/Play/Stop 3. Vol – 4. Vol + 5. Down6. Up 7. Shhhh! (snooze/sleep)

Rear view8. Master Power Switch 9. DC 5 V IN10. Aux-In

Front view12. iPhone/iPod Dock Connector 13. LCD Screen

1

8

2

9 10

11

12 13

3 4 5 6 7

Bottom view11. Battery Compartment

8 9

Quick start

Installing the AC adapter• Locate the DC Input Jack (9)• Insert the AC adapter cable into this jack• Now plug the AC adapter into your mains socket

Installing the backup batteries for clock and alarm settingsIn order to offer consistent clock settings and alarm functions, the unit uses a backup battery system. This means that in the event of a power failure, all the settings of unit will remain saved. The display will NOT remain lit, but the time and date settings will be temporarily maintained. The alarm, will not sound when the unit is powered only by the backup batteries.

– Make sure the connection between the DC adapter and the unit is secure. This is important, because during battery replacement it is possible for all settings to be lost if the clock and alarm have already been set

– Locate the battery compartment on the bottom of the unit and open

– Insert two “AAA” batteries, following the correct polarity (+/-) drawings inside the battery compartment. For longer battery life, alkaline batteries are suggested. Please note that new and used batteries should not be mixed. Likewise, alkaline, standard (carbon- zinc) or rechargeable (nickel-cadmium) batteries should not be used together

AUX RADIO

1

2

AM

PM

FM

MEM

SLEEP BUZZER

Screen icons1. Aux icon 2. Alarm 1 on3. FM indicator4. Alarm 2 on 5. Radio icon6. iPod/iPhone icon7. Sleep8. Buzzer icon9. Shhhh!/ZZZ display10. MEM display11. Time/alarm display

5 6 7 8 9

10 11

1

2

34

10 11

Alarm 2• Put the XDock2 into standby mode• Press (don’t hold) the ‘Vol+‘ (4) button and the Alarm 2 icon will flash• Press the ‘Up’ (6) or ‘Down’ (5) buttons to select between buzzer, iPod or radio to wake you up, followed by the

‘Vol+‘ (4) to confirm• Press the ‘Up’ (6) or ‘Down’ (5) buttons to change the hours, followed by the ‘Vol+‘ (4) to confirm• Press the ‘Up’ (6) or ‘Down’ (5) buttons to change the minutes, followed by the ‘Vol+‘ (4) to confirm• The alarm is now set

SnoozePress the ‘Shhhh!’ (7) button. The alarm will then go off and will resume again in nine minutes.

NOTE: The alarm will repeat every day until it is reset.

If you have selected to be woken up with your iPod/iPhone but have not docked it, you will be woken with the buzzer. In order to wake to your iPhone or iPod, it must be docked and powered off. If it is in the play mode, no alarm will sound. If your iPhone or iPod has less than one hour of songs, put it in repeat mode.

Turn off the alarm• Press the Power/Mode (1) button

Cancel the alarm(s) you have setWith the XDock2 in standby mode, press the Vol– (3) / Vol+ (4) button until the desired alarm icon does not show on the LCD display.

Basic use

Turn the XDock2 on • Firstly, make sure the AC adapter is connected and that the main power switch on the rear of the unit is in the

‘ON’ position• Now press and release the ‘Power/Mode’ (1) button

NOTE: Pressing this button again will cycle through the Aux/iPod/iPhone and Radio modes (explained later)

Put the XDock2 into standby mode• Press and hold the Power/Mode (1) button until the display dims

Set the clockSimply dock your iPod or iPhone and the XDock2 will automatically adopt the exact same time. Alternatively:

• With the XDock2 in standby mode, press and release the ‘Menu’ (2) button. The hour digit will now be flashing• Press the ‘Down’ (5) or ‘Up’ (6) button to decrease or increase the hours and press the ‘Menu’ (2) button to confirm

your setting. The minute digits will now be flashing. Press the ‘Down’ (5) or ‘Up’ (6) button to decrease or increase the minutes and either press the ‘Menu’ (2) button or wait for a few seconds to save the time

Alarm1• Put the XDock2 into standby mode• Press (don’t hold) the ‘Vol-‘ (3) button and the Alarm 1 icon will flash• Press the ‘Up’ (6) or ‘Down’ (5) buttons to select between buzzer, iPod or radio to wake you up, followed by the

‘Vol-‘ (3) to confirm• Press the ‘Up’ (6) or ‘Down’ (5) buttons to change the hours, followed by the ‘Vol-‘ (3) to confirm• Press the ‘Up’ (6) or ‘Down’ (5) buttons to change the minutes, followed by the ‘Vol-‘ (3) to confirm• The alarm is now set

12 13

Play your music• To listen to music, dock your iPod or iPhone into the XDock2. Your music will start playing automatically• To pause your music, press the ‘Menu‘ (2) button. To resume playback, press it again• To adjust the volume, press Vol+ (4) and Vol- (3)• To go to the next or previous track, use the ‘Up’ (6) or ‘Down’ (5) button. To search the current track using high speed

forward or rewind, press and hold ‘Up’ or ‘Down’ while the track is playing

Connect other audio devicesYou can still listen to any other audio player that is not an iPod or iPhone on the XDock2, by using the Aux-In jack, located on the rear of XDock2.

• Insert the plug of a 3.5 mm audio cable into the HEADPHONE or LINE-OUT jack on your audio device, then insert the other end of the cable into the Aux-In (10) jack, located on the rear of XDock2

• To put the XDock2 into the aux mode, press the ‘Power/Mode’ (1) button until the aux icon appears• Turn your device on, press play, and enjoy your music

Listen to the radioFor the best FM radio clarity, fully extend the wire antenna, located on the rear of the XDock2. It is important not to alter, obstruct or attach other antennas to this wire antenna.

• To turn the radio on, press the ‘Power/Mode’ (1) button until the radio icon appears on the LCD screen. Tune in a desired station, press the ‘Up’ (6) or ‘Down’ (5) button to search manually

• Press and hold ‘Up’ (6) or ‘Down’ (5) until the numbers start changing to auto scan for the next station• To save the station to a preset, press and hold the ‘Menu’ (2) button until the MEM icon flashes on the screen,

then press ‘Up’ (6) or ‘Down’ (5) to save it into a channel from 1 to 10. Press the ‘Menu’ (2) button to confirm• To listen to the preset station when in radio mode, press the ‘Menu’ (2). The MEM icon will be lit and the display will

show a ‘CH’ with a number next to it. Select the preset by pressing ‘Up’ (6) or ‘Down’ (5) and ‘Menu’ (2) to confirm

14 15

Specifications

• Dock connector: lightning• Alarms: 2• Snooze time: 9 mins• Frequency response: 100 Hz – 20 kHz• Backup battery: 2 x AAA

Troubleshooting

We hope you’ve now got all the information you need to get started, but if you’re having problems with anything, please feel free to contact us at: support@kitsound.co.uk

Sleep• To enter into sleep mode, press the ‘Shhhh!’ button on the top of the XDock2 while listening to your iPod or the radio• Cycle through to choose from 90 mins to 10 mins• The unit will automatically turn off after the selected time• To adjust the sleep time, press the ‘Shhhh!’ button again and choose from 10 to 90 minutes• To cancel the sleep time, press the ‘Shhhh!’ button repeatedly until it flashes ‘OFF’• To stop listening at any time, press and hold the Power/Mode (1) button

Care for your XDock2

Please DON’T– Get the XDock2 wet– Drop the XDock2 as this will invalidate your warranty– Open up the XDock2. There are no user serviceable parts inside– Use any other mains adapter than the one supplied– Expose the XDock2 to extreme temperatures or rapid changes of hot to cold or vice versa

Please DO– Clean the XDock2 with a soft dry cloth and no detergents