Summary

I fused two of the Prusa Mini sized lack drawers to be able to fit more tools.

You can fit 3 normal sized ones + this double size, but there will be a smallgap at the right side.

The fused drawer consists of a normal drawer and the far-right one.

I also cut off the vertical part of two corners as it kept warping on and theprint bed on the Prusa Mini was to small to also fit a brim.

3D Printers > Other Accessories

prusamini lack ikealackenclosure ikealack enclosure

drawer

Printed without support in PETG 0.25mm

This remix is based on

J John

Prusa Mini LackDrawers DoubleSize

VIEW IN BROWSER

updated 26. 6. 2020 | published 26. 6. 2020

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

171.9 KBupdated 26. 6. 2020

200.3 KBupdated 26. 6. 2020

Lack Enclosure Drawers for Prusa MINI

by Bdaboy

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-ShareAlike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

lackdrawers-prusamini-doublesize-drawer.stl

lackdrawers-prusamini-doublesize-case.stl