yds wandtattoo neu2 english · for filigree decals we use a transparent transfer foil - press onto...

1
14 Now it’s time to admire your wonderful art work. Always removable without residue. [email protected] 0049 - 351 407 68 97 96 @ Mon - Fri 9 am – 7 pm Sun 9 am – 3 pm The handling of multi-coloured wall decals is similar to the single-coloured decals. 1 2 3 4 3 13 4 5 1 6 Our wall decals are made of a soft, matt and self-adhesive vinyl foil. Thereby they appear as though they are hand-painted on the wall. Our decals can be applied to any hard, clean, smooth and dry interior surface, for example woodchip and flat wallpaper, tiles, glass, acrylic glass or plastic. Because of climatic conditions, we recommend leaving the product 1 or 2 days, for the foil to acclimatise with the room temperature. In doing this, you can avoid unnecessary problems with your product and enjoy its quality aesthetics. Press the transparent transfer foil onto the vinyl foil (the decal itself) with the help of the squeegee. Now, gently peel away the white backing paper slowly and close to the transparent transfer foil. Put your wall decal onto a hard and flat surface. Make sure, that the whole decal sticks to the transfer foil - otherwise press again. 2 If desired, separate single pieces of your motif from each other. Position your decal on the wall. For filigree decals we use a transparent transfer foil - Press onto it in advance, see step 3 & 4 above. Gently peel away the decor from the white backing paper. For filigree decals, see steps 5 & 6 above. Stroke your decal from the middle to the outside with the help of the squeegee. Place your wall decal and make sure it is where you want it. Press the motif tightly to the wall. Turn your decal and press again from the other side. - 12 8 9 11 10 7 Take the transparent transfer foil carefully with both hands. Position your wall decal with the transfer foil on the wall and make sure it is where you want it. Press one edge of the transfer foil tightly to the wall. Start to stroke your decal from the middle to the outside with the help of the squeegee on the wall. If your decal peels up use the transfer foil to press it to the wall. Sometimes it’s necessary to fix filigree parts with your fingers to the wall. Now, remove the transfer foil carefully. Start at one corner and peel it away slowly and close to the surface. Make sure your decal doesn’t peel up with it. Be careful and work slowly to avoid damage to the foils! WALL DECALS www.yourdecoshop.com YOUR DECO SHOP WALL DECALS

Upload: others

Post on 19-Aug-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: YDS WandTattoo neu2 English · For filigree decals we use a transparent transfer foil - Press onto it in advance, see step 3 & 4 above. Gently peel away the decor from the white backing

14Now it’s time to admire your wonderful art work.

Always removable without residue.

[email protected] - 351 407 68 97 96

@ Mon - Fri 9 am – 7 pm Sun 9 am – 3 pm

The handling of multi-coloured wall decals is similar to the single-coloured decals.

1 2 3 4

3

13

4 51 6

Our wall decals are made of a soft, matt and

self-adhesive vinyl foil. Thereby they appear as though

they are hand-painted on the wall. Our decals can be

applied to any hard, clean, smooth and dry interior

surface, for example woodchip and flat wallpaper, tiles,

glass, acrylic glass or plastic.

Because of climatic conditions, we recommend leaving

the product 1 or 2 days, for the foil to acclimatise with

the room temperature. In doing this, you can avoid

unnecessary problems with your product and enjoy its

quality aesthetics.

Press the transparent transfer foil onto the vinyl foil (the decal itself) with the help of the squeegee.

Now, gently peel away the white backing paper slowly and close to the transparent transfer foil.

Put your wall decal onto a hard and flat surface.

Make sure, that the whole decal sticks to the transfer foil - otherwise press again.

2If desired, separate single pieces of your motif from each other.

Position your decal on the wall. For filigree decals we use a transparent transfer foil - Press onto it in advance, see step 3 & 4 above.

Gently peel away the decor from the white backing paper. For filigree decals, see steps 5 & 6 above.

Stroke your decal from the middle to the outside with the help of the squeegee.

Place your wall decal and make sure it is where you want it. Press the motif tightly to the wall.

Turn your decal and press again from the other side.

-128 9 11107

Take the transparent transfer foil carefully with both hands.

Position your wall decal with the transfer foil on the wall and make sure it is where you want it. Press one edge of the transfer foil tightly to the wall.

Start to stroke your decal from the middle to the outside with the help of the squeegee on the wall.

If your decal peels up use the transfer foil to press it to the wall.

Sometimes it’s necessary to fix filigree parts with your fingers to the wall.

Now, remove the transfer foil carefully. Start at one corner and peel it away slowly and close to the surface. Make sure your decal doesn’t peel up with it.

Be careful and work slowly to avoid damage to the foils!

WALL DECALS

www.yourdecoshop.comY O U R D E C O S H O P

WALL DECALS