years - cherry products · cf07hdw 2.13m 3 (75ft ) 2.45m (8') 1.30m 1.20m 700 hardox 10 £4340...
TRANSCRIPT
2020CHERRY
PRODUCTS
CHERRY PRODUCTSYears
NEW CompositeExtinguishers.Customers SAVE on Average 4747%%
IntroductionCherry Products Limited was established in 1980, with the sole aim that remains today, of producing the highest quality Materials Handling Equipment on the market at the right price. As a British Company our consistent success has been maintained due to unrivalled personal service and the ability to keep pace with the constantly changing requirements and developments in agriculture and its allied industries.
Cherry Products Limited through this philosophy become a major force in the market place and continues to strive for further excellence in the service and build quality with its existing range of products.
CHERRY
PRODUCTSCHERRY PRODUCTS
HEADSTOCKSOTHER ATTACHMENTSMAN PLATFORMSPALLET FORKS BALE HANDLINGBUCKETS
IndexFORKS
BRACKETS 5X-FORM FORKS 6
HD FORK & GRABS - FOR 2 - 3 TONNE MACHINES 7HD FORK & GRABS - FOR 3 - 4.5 TONNE MACHINES 8 TRACTOR LOADER/SKID-STEER FORK AND GRABS 9
BUCK RAKES 10 FOLDING FORKS 11
FORKS WITH BOLT ON GRAB 12
MANURE / SILAGE FORKS 13FORKS PARTS, TINES
& VALVES 15
BALE HANDLINGFLAT BALE GRABS 36
BALE SPIKES 37OVER ARM BALE GRAB &
SIDE SQUEEZE BALE GRAB 38SOFT HANDS BALE GRAB
& BALE GRAB WITH ROLLERS
39
PALLET FORKSPALLET FORK CARRIAGES 40
PALLET FORK TINES 41PALLET FORK EXTENSIONS 42
TINE MOUNTED BRUSH 43
MAN PLATFORMSTWO MAN
SAFETY ACCESS PLATFORMS
44
SMARTBOXSMARTBOX STORAGE 45
NEW PRODUCTSSTONE FORK 46
EXTINGUISHERS 52
HEADSTOCKSHEADSTOCK
CONVERSIONS 58
NEW BUILD HEADSTOCKS 60ADAPTOR PLATES 62
OTHER ATTACHMENTSIMPLEMENT MOVER 46
BIG BAG LIFTERS 47GRAIN PUSHER 48
PICK UP HITCHES 49SHEAR GRABS 50
EXTINGUISHERS 52 LOG GRABS 54
WOOD BINS &TIPPING SKIPS 55
BOX GRADER 56 SNOW PLOUGHS &
SNOW BLADES 57
FORKS
BUCKETSX-FORM BUCKETS 16
X-FORM BUCKET BRUSHES 18X-FORM MULTI BUCKETS 19
X-FORM+ BUCKETS 20REHANDLING BUCKETS 22
GRAIN BUCKETS 23LOADER/SKIDSTEER
BUCKETS 24 MULTI PURPOSE BUCKETS 25JCB TELETRUK BUCKETS 26
LOW PROFILE /POTATO BUCKETS 27
DIGGING BUCKETS 284 IN 1 BUCKETS 29
TOE TIP BUCKETS 30WASTE BUCKETS WITH CLAW 31
ROOT CROP BUCKETS 32BAG FILLING BUCKET 33
BUCKET PARTS 34REPLACEMENT TOE PLATES 35
CHERRY
PRODUCTSCHERRY PRODUCTS
MATERIAL WEIGHTlb./cu.ft.
WEIGHTkg/m3 MATERIAL WEIGHT
lb./cu.ft.WEIGHTkg/m3 MATERIAL WEIGHT
lb./cu.ft.WEIGHTkg/m3
APPLES 33 525 FERTILISER (BULK) 64 1017 SAWDUST (DRY) 15 238ALUMINIUM ORE 100 1590 FLOUR (BULK) 28 445 SAWDUST FLOORING 90 1431ASHES 38 604 FOAMED SLAG AGGREGATE 80 1272 SHALE 111 1764BARLEY 39 620 GLASS 168 2671 SILAGE (GREEN) 22 349BASALT 236 3752 HAY (BALED NORMAL DENSITY) 12 190 SILAGE (GRASS ENSILED) 47 747BEET PULP (PRESSED) 57 906 HARDWOOD (OAK) 46 731 SILAGE (MAIZE) 33 524BEET PULP (NUTS) 38 604 LEAD SHEET 720 11448 SLAG 66 1049BREWERS GRAIN 70 1110 IRON ORE (60% IRON) 300 4770 SLATE 180 2862BRICK AGGREGATE 115 1828 MANURE (FARMYARD) 58 922 SLURRY 112 1780BRICK (COMMON) 125 1987 NICKEL ORE 83 1319 SNOW (DRY) 9 143CARROT 40 636 OATS 26 413 SNOW (FRESH WET) 27 429CEMENT (NATURAL) 55 874 ONIONS 35 556 SOFTWOOD (REDWOOD) 33 524CEMENT (PORTLAND) 90 1431 PEAT 62 985 STEEL SHEET 483 7679CHALK 50 795 PLASTER (GYPSUM) 120 1908 STONE (CRUSHED) 160 2544CLINKER AGGREGATE 95 1510 PLYWOOD 120 1908 STRAW (NORMAL DENSITY BALE) 10 159CLAY (DENSE) 111 1764 POTATOES 44 699 STRAW (HIGH DENSITY BALE) 16 254COAL (ANTHRACITE) 55 874 POTASH 70 1113 SUGAR BEET 35 556COAL (PULVERISED) 34 540 PUMICE AGGREGATE 70 1113 TERRA COTTA (SOLID) 132 2098COKE (LOOSE) 37 588 REFUSE (TOWN) 20 318 TURNIPS 34 540COKE (BREEZE) 29 461 RUBBER (FLOORING) 130 2067 WHEAT 48 763CONCRETE (PLAIN) 144 2289 RUBBLE 66 1049 WOODCHIPS (DRY) 24 381CORK FLOORING 24 381 SALT 64 1017 WOODCHIPS (WET) 48 763EARTH (DRY LOOSE) 70 1113 SAND (DRY) 83 1319 ZINC ORE 160 2544EARTH (WET PACKED) 100 1590 SAND (WET) 104 1653
5
BRACKETS
CHERRY
PRODUCTS
CHERRY PRODUCTS
We manufacture a large range of weld on brackets with most OEM types in stock. Despatch can be by next day carrier when required. If the brackets you require aren't in stock, we will do our best to get them made up within a couple of days and dispatched.
Bracket Type £ RRP Bracket Type £ RRP Bracket Type £ RRPBomford Turner £120 JCB 3C/3CX £220 Matbro/Pin And Cone £150Cat Old (pre 2001) £175 JCB Toolcarrier £175 Merlo ZM2 £150Cat New (post 2001) £175 JCB Industrial/Europe/Volvo £175 Merlo ZM3 (Single Pin) £180
Chillton/Mailleux MX £200 JCB Teletruck Quick Release £255 MF 8925/8926/8937/8939 (Old Style Wide Type) £205
Sanderson £250 John Deere 245/265 £250 MF New Style (Bobcat Telehandler) £195Grays £115 Kramer Compact (30mm Ø Lower Pin) £105 New Holland £135Euro No. 8/Euro Fit £115 Kramer Standard (40mm Ø Lower Pin) £150 Quickie No.3 (ALO) £105
Howard Farmhand FX/Gyro £130 Kramer Large/Scorpion (50mm Ø Lower Pin) £175 Skid Steer £170
JCB Changezee £145 Manitou Maniscopic £185 Tanco £105JCB Compact Tool Carrier (Quick Hitch) £150 Massey Ferguson 80 £120 Trima SMS 5 £105
JCB Q-Fit £150 Massey Ferguson 915/Faucheux (White) £120 Weidemann/Hoftrac £105
HEADSTOCKSOTHER ATTACHMENTSMAN PLATFORMSPALLET FORKS BALE HANDLINGBUCKETSFORKS
FORKS
X-FORM FORK & GRABS
Part No. Capacity Width Height Depth Weight Kg £ RRP - KV TINES
£ RRP - HARDOX
£ RRP - MIXED TINES
GL-56 0.90m3 1.70m (5'6") 0.82m (2'8") 0.82m (2'8") 261 £1985 £2222 £2150GL-60 0.95m3 1.85m (6') 0.82m (2'8") 0.82m (2'8") 274 £2030 £2265 £2185GL-66 1.00m3 2.00m (6'6") 0.82m (2'8") 0.82m (2'8") 283 £2060 £2310 £2222GS-66 1.50m3 2.00m (6'6") 1.10m (3'7") 1.10m (3'7") 457 £2545 £2945 £2780GS-70 1.60m3 2.15m (7') 1.10m (3'7") 1.10m (3'7") 470 £2620 £3020 £2870GS-76 1.70m3 2.3m (7'6") 1.10m (3'7") 1.10m (3'7") 490 £2710 £3090 £2945GH-76 2.25m3 2.3m (7'6") 1.30m (4'3") 1.30m (4'3") 541 £3090 £3575 £3415GS-80 1.80m3 2.45m (8') 1.10m (3'7") 1.10m (3'7") 523 £2780 £3180 £3020GH-80 2.40m3 2.45m (8') 1.30m (4'3") 1.30m (4'3") 563 £3240 £3740 £3575GS-86 1.90m3 2.60m (8'6") 1.10m (3'7") 1.10m (3'7") 556 £2870 £3250 £3090GH-86 2.55m3 2.60m (8'6") 1.30m (4'3") 1.30m (4'3") 577 £3420 £3900 £3740GH-90 2.70m3 2.75m (9') 1.30m (4'3") 1.30m (4'3") 599 £3575 £4050 £3900
5'6" to 9' Models. Note: Merlo and CAT Machines may require a check valve add part number CT13 RRP £110
• Brackets Included. • Add (M) for mixed tines. • Add (X) for Hardox tines (Hardox fork & grab tines). • Leave the part number without a suffix for KV tines (KV fork & grab tines). • GL Models are specifically manufactured for tractor loaders. • GS Models are made to suit standard sized tele-handlers or larger loaders. • GH Models are manufactured to suit large telehandlers or loading shovels.
CHERRY
PRODUCTS
6
GS-76X
GS-80
HD FORK & GRABSFOR 2 - 3 TONNE MACHINES
Part No. Capacity Width Height Depth Weight Kg Tines No. £ RRPCF06SK 1.57m3 (55ft3) 1.98m (6'6") 1.06m 1.01m 350 KV type 9 £3200CF06S 1.57m3 (55ft3) 1.98m (6'6") 1.06m 1.01m 375 2'' round 9 £3400CF06SHD 1.57m3 (55ft3) 1.98m (6'6") 1.06m 1.01m 450 Hardox 8 £3580CF06AK 1.71m3 (60ft3) 2.13m (7') 1.06m 1.01m 370 KV type 9 £3350CF06A 1.71m3 (60ft3) 2.13m (7') 1.06m 1.01m 400 2'' round 9 £3565CF06AHD 1.71m3 (60ft3) 2.13m (7') 1.06m 1.01m 475 Hardox 8 £3765CF06K 1.84m3 (65ft3) 2.28m (7'6") 1.06m 1.01m 425 KV type 10 £3495CF06 1.84m3 (65ft3) 2.28m (7'6") 1.06m 1.01m 435 2'' round 10 £3730CF06HD 1.84m3 (65ft3) 2.28m (7'6") 1.06m 1.01m 555 Hardox 9 £3950CF06KW 1.98m3 (70ft3) 2.45m (8') 1.06m 1.01m 545 KV type 11 £3635CF06W 1.98m3 (70ft3) 2.45m (8') 1.06m 1.01m 555 2'' round 11 £3895CF06HDW 1.98m3 (70ft3) 2.45m (8') 1.06m 1.01m 660 Hardox 10 £4135
Brackets Included / 1520mm Vertical Opening Height
7
FORKS
ALL FORKS HAVE A TUBE STYLE BACK AS STANDARD - ADD THE FOLLOWING PART NUMBER FOR ANOTHER STYLE OF FORK BACK CM1 - MIDDLE PLATED CM2 - WHOLE FORK BACK PLATED - CM4 - WHOLE FORK BACK PLATED WITH CHERRY CUT OUT AND VISIBILITY SLOTS - CM1 - CM2 - CM4 NO EXTRA COST DST01 DOUBLE SIDE TINES RRP £275
SUITABILITY
CHERRY
PRODUCTS
CHERRY PRODUCTS
CF06K
CF06HD
Part No. Capacity Width Height Depth Weight Kg Tines No. £ RRP
CF07AK 1.85m3 (65ft3) 2.13m (7') 1.30m 1.10m 450 KV type 9 £3525CF07A 1.85m3 (65ft3) 2.13m (7') 1.30m 1.10m 460 2" round 9 £3745CF07AHD 1.85m3 (65ft3) 2.13m (7') 1.30m 1.20m 500 Hardox 8 £3965CF07K 1.98m3 (70ft3) 2.28m (7'6") 1.30m 1.10m 475 KV type 10 £3670CF07 1.98m3 (70ft3) 2.28m (7'6") 1.30m 1.10m 485 2" round 10 £3910CF07HD 1.98m3 (70ft3) 2.28m (7'6") 1.30m 1.20m 605 Hardox 9 £4150CF07KW 2.13m3 (75ft3) 2.45m (8') 1.30m 1.10m 595 KV type 11 £3810CF07W 2.13m3 (75ft3) 2.45m (8') 1.30m 1.10m 605 2" round 11 £4075CF07HDW 2.13m3 (75ft3) 2.45m (8') 1.30m 1.20m 700 Hardox 10 £4340
HD FORK & GRABS FOR 3 - 4.5 TONNE MACHINES
FORKS
8
Brackets Included / 1760mm Vertical Opening Height
ALL FORKS HAVE A TUBE STYLE BACK AS STANDARD - ADD THE FOLLOWING PART NUMBER FOR ANOTHER STYLE OF FORK BACK CM1 - MIDDLE PLATED CM2 - WHOLE FORK BACK PLATED - CM4 - WHOLE FORK BACK PLATED WITH CHERRY CUT OUT AND VISIBILITY SLOTS - CM1 - CM2 - CM4 NO EXTRA COST DST01 DOUBLE SIDE TINES RRP £275
SUITABILITY
CHERRY
PRODUCTS
CHERRY PRODUCTS
CF07W
CF07HD
FORKS
CHERRY PRODUCTSTRACTOR LOADER/SKIDSTEER FORK AND GRABS
Fork and grabs for Loaders and Skidsteers come as standard with two high capacity hydraulic cylinders, with high grade zinc plated pins for long working life. A wide, 910mm opening grab means the grab can be used in a variety of applications, from mucking out to moving bales. Hydraulic hoses included as standard.
9
Part No. Capacity Width Height Depth Weight Kg Tines £ RRP
FG4 0.71m3 (25ft3) 1.22m (4') 0.80m 0.82m 240 KV type £1585
FG46 0.79m3 (28ft3) 1.37m (4'6") 0.80m 0.82m 270 KV type £1635
FG5 0.88m3 (31ft3) 1.52m (5') 0.80m 0.82m 300 KV type £1715
FG56 0.96m3 (34ft3) 1.68m (5'6") 0.80m 0.82m 330 KV type £1750
FG6 1.05m3 (37ft3) 1.83m (6') 0.80m 0.82m 360 KV type £1885
FG66 1.19m3 (42ft3) 1.98m (6'6") 0.80m 0.82m 380 KV type £1920
CHERRY
PRODUCTS
SUITABILITY
Brackets Included. For side tines add 'ST' to the part number £95 (Single Tine Each Side)
FG5
FG5
BUCK RAKES
Part No. Capacity Width Height Depth Weight Kg Tines No. £ RRP
CF0508K 3.92m3 (138ft3) 2.45m (8') 1.46m 1.40m 925 KV type 13 £5050
CF0508HD 3.92m3 (138ft3) 2.45m (8') 1.46m 1.40m 1120 Hardox 10 £5400
CF0509K 4.38m3 (154ft3) 2.74m (9') 1.46m 1.40m 1040 KV type 14 £5200
CF0509HD 4.38m3 (154ft3) 2.74m (9') 1.46m 1.40m 1260 Hardox 11 £5550
CF0510K 4.87m3 (172ft3) 3.04m (10') 1.46m 1.40m 1150 KV type 15 £5400
CF0510HD 4.87m3 (172ft3) 3.04m (10') 1.46m 1.40m 1400 Hardox 12 £5765
CAT 2/3 Linkage as standard. Three point linkage and telehandler brackets if compatible £620. Standard colour black with red chevrons. Other manufacturers colours available £210.
10
FORKS
Design features include 8mm walled bottom box for the tines, which is supported by a full width 25mm base plate and a further three 20mm thick bucket edge wear pads. The 25mm thick profiled arms cut from S700 grade steel, all of the pins are high grade steel and zinc plated.
CHERRY
PRODUCTS
CHERRY PRODUCTS
CF0509K
CF0509K
FOLDING FORKS
FORKS
11
Part No. Capacity Width Height Depth Weight Kg Tines No. £ RRPCF0912HD 6.80m3 (240ft3) 12ft / 8ft 1.38m 1.80m 1550 Hardox 15 £8650CF0914HD 8.00m3 (282ft3) 14ft / 8ft 1.38m 1.80m 1620 Hardox 17 £8920CF0916HD 9.20m3 (325ft3) 16ft / 10ft 1.38m 1.80m 1690 Hardox 19 £9200
Part No. Description £ RRPTG01 Tine Guard for road transport £825TG02 LED Light system fitted to a TG01 £360
Re-designed for 2018, the all new Cherry Folding Fork takes the term 'Heavy Duty' to a whole new level. Hydraulic folding wings pivot on a 70mmØ pin which themselves sit within a 110mmØ bush. A closed width of 8' provides a safe option for road transport whilst the fork opens out to 12' or 14' depending on the model for maximum productivity in the clamp. Sitting between the heavy duty mounting brackets, a protection plate prevents grass pressing into the Loading Shovels' headstock.
1600mm long Hardox tines, full length bucket wear edge welded to the underside and a heavy duty profiled box section made from 20mm thick profiles complete the robust design.
SUITABILITY
CHERRY
PRODUCTS
CHERRY PRODUCTS
The prices above include an agricultural spec painted finish. Sandblasted and painted with two pack paint £1465
CF0914HD
CF0916HD
FORKS WITH BOLT ON GRAB
Part No. Capacity Width Height Depth Weight Kg Tines No. £ RRPCF02SK 1.59m3 (56ft3) 1.98m (6'6") 1.20m 1.10m 520 KV type 9 £3800CF02SHD 1.59m3 (56ft3) 1.98m (6'6") 1.20m 1.20m 505 Hardox 8 £4180CF02AK 1.71m3 (60ft3) 2.13m (7') 1.20m 1.10m 560 KV type 9 £3900CF02A 1.71m3 (60ft3) 2.13m (7') 1.20m 1.10m 538 2" round 9 £4150CF02AHD 1.71m3 (60ft3) 2.13m (7') 1.20m 1.20m 558 Hardox 8 £4375CF02K 1.84m3 (65ft3) 2.28m (7'6") 1.20m 1.10m 600 KV type 10 £4050CF02 1.84m3 (65ft3) 2.28m (7'6") 1.20m 1.10m 560 2" round 10 £4310CF02HD 1.84m3 (65ft3) 2.28m (7'6") 1.20m 1.20m 582 Hardox 9 £4560CF02KW 1.95m3 (68ft3) 2.45m (8') 1.20m 1.10m 620 KV type 11 £4185CF02W 1.95m3 (68ft3) 2.45m (8') 1.20m 1.10m 630 2" round 11 £4470CF02HDW 1.95m3 (68ft3) 2.45m (8') 1.20m 1.20m 645 Hardox 10 £4745
Brackets Included / 1996mm Vertical Opening Height
12
FORKS
ALL FORKS HAVE A TUBE STYLE BACK AS STANDARD - ADD THE FOLLOWING PART NUMBER FOR ANOTHER STYLE OF FORK BACK CM1 - MIDDLE PLATED CM2 - WHOLE FORK BACK PLATED - CM4 - WHOLE FORK BACK PLATED WITH CHERRY CUT OUT AND VISIBILITY SLOTS - CM1 - CM2 - CM4 NO EXTRA COST DST01 DOUBLE SIDE TINES RRP £270
SUITABILITY
CHERRY
PRODUCTS
CHERRY PRODUCTS
CF02K
CF02HD
13
MANURE / SILAGE FORKS(Loader/Skidsteer Models)
13
Part No. Capacity Width Height Depth Weight Kg Tines No. £ RRPCF01FE120K 0.35m3 1.22m (4') 0.49m 0.68m 210 KV Type 6 £960
CF01FE100K 0.42m3 1.37m (4'6") 0.49m 0.68m 220 KV Type 7 £985
CF01FE250K 0.71m3 1.22m (4') 0.60m 0.81m 240 KV Type 6 £1125
CF01FE240K 0.79m3 1.37m (4'6") 0.60m 0.81m 270 KV Type 7 £1135
CF01FE230K 0.88m3 1.52m (5') 0.60m 0.81m 300 KV Type 8 £1145
CF01FE220K 0.96m3 1.68m (5'6") 0.60m 0.81m 330 KV Type 9 £1160
CF01FE200K 1.05m3 1.83m (6') 0.60m 0.81m 360 KV Type 10 £1165
CF01FE190K 1.19m3 1.98m (6'6") 0.60m 0.81m 390 KV Type 11 £1175
Brackets Included
ALL FORKS HAVE A TUBE STYLE BACK AS STANDARD - ADD THE FOLLOWING PART NUMBER FOR ANOTHER STYLE OF FORK BACK CM1 - MIDDLE PLATED CM2 - WHOLE FORK BACK PLATED - CM4 - WHOLE FORK BACK PLATED WITH CHERRY CUT OUT AND VISIBILITY SLOTS - CM1 - CM2 - CM4 NO EXTRA COST DST01 DOUBLE SIDE TINES RRP £270
SUITABILITY
FORKSFORKS
CHERRY
PRODUCTS
CHERRY PRODUCTS
CF01FE200K
CF01FE240K
FORKS BUCKETS BALE HANDLING PALLET FORKS MAN PLATFORMS HEADSTOCKS ATTACHMENTS
MANURE / SILAGE FORKS(Telehandler Models)
Part No. Capacity Width Height Depth Weight Kg Tines No. £ RRPCF01SHD 1.59m3 1.98m (6'6") 0.82m 0.98m 385 Hardox 8 £2270CF01SK 1.59m3 1.98m (6'6") 0.82m 0.98m 365 KV Type 9 £1885CF01AHD 1.71m3 2.13m (7') 1.05m 1.20m 400 Hardox 8 £2460CF01AK 1.71m3 2.13m (7') 1.05m 1.10m 392 KV Type 9 £1985CF01A 1.71m3 2.13m (7') 1.05m 1.10m 420 2" Round 9 £2225CF01HD 1.84m3 2.28m (7'6") 1.05m 1.20m 450 Hardox 9 £2645CF01K 1.84m3 2.28m (7'6") 1.05m 1.10m 403 KV Type 10 £2130CF01 1.84m3 2.28m (7'6") 1.05m 1.10m 480 2" Round 10 £2390CF01HDW 1.95m3 2.45m (8') 1.05m 1.20m 510 Hardox 10 £2830CF01KW 1.95m3 2.45m (8') 1.05m 1.10m 475 KV Type 11 £2270CF01W 1.95m3 2.45m (8') 1.05m 1.10m 510 2" Round 11 £2555
Brackets Included
ALL FORKS HAVE A TUBE STYLE BACK AS STANDARD - ADD THE FOLLOWING PART NUMBER FOR ANOTHER STYLE OF FORK BACK CM1 - MIDDLE PLATED CM2 - WHOLE FORK BACK PLATED - CM4 - WHOLE FORK BACK PLATED WITH CHERRY CUT OUT AND VISIBILITY SLOTS - CM1 - CM2 - CM4 NO EXTRA COST DST01 DOUBLE SIDE TINES RRP £265
SUITABILITY 14
FORKS
CHERRY
PRODUCTS
CHERRY PRODUCTS
CF01K
CF01HDCM1
FORKS PARTS, TINES & VALVES
FORKS
15
CHERRY PRODUCTS
Part No. Description £ RRPC1B Conus 1 Bush 33.5mm DIA £15C2B Conus 2 Bush 41mm DIA £20CT10/CBHD Heavy Duty Waste Grab £2600CT08/CF02 Top Grab Kit £2000CT09/CF03 Power Grab Kit £1700
CT07Fork Side Extensions (1 Extra Tine Width) £850
RFB22867'6'' Replacement Fork Bottom Box
section w/ bushes and KV tines £920
RFB24508' Replacement Fork Bottom Box section w/ bushes and KV tines £1000
BBX2286Bottom Box Section only (No Tines, just bushes) £570
Part No. Description Size £ RRP
CT01/T Tapered Socket Round Red Tine 50Ø x1100mm £90
CT02/HD Hardox Tine (50mm width) 50x980mm £100CT02/HD/0 Hardox Tine (50mm width) 50x1200mm £115CT02/HD/1 Hardox Tine (50mm width) 50x1400mm £130CT02/HD/2 Hardox Tine (50mm width) 50x1600mm £170CT02/HD/3 Hardox Tine (40mm width) 40x1400mm £110CT02/HD/4 Hardox Tine (40mm width) 40x1200mm £95CT02/HD/5 Hardox Tine (40mm width) 40x980mm £80CT03/0 KV Type Tine 1400mm £75CT03/1 KV Type Tine 1250mm £70CT03/2 KV Type Tine 1100mm £65
Part No. Description Size £ RRPCT03/3 KV Type Tine 980mm £55CT03/4 KV Type Tine 820mm £45CT03/5 KV Type Tine 680mm £40CT06 KV Type Curved Tine 50x810mm £50CT06/1 KV Type Curved Tine 50x680mm £45CTBG14 Bale Grab Claw Tine N/A £20CT13 Check Valve N/A £110CT14 Flow Divider Valve N/A £195
COV-K-KIT Change-Over valve kit for a Kramer built machine N/A £180
COV-L-KIT Change-Over valve kit for a Liebherr built machine N/A £180 The prices shown are for supply only. Costs for refurbs, refittings
or repairs are not included. Please ask our Sales Team for details.
We stock a wide range of Tines and bushes to meet the needs of all types of work. As with all of our parts range, we keep a massive selection in stock, so items will usually be despatched on the same day of purchase. All of our tine range has been tried and tested in the working environment, aiding farmers in maximising the potential of their Cherry attachments. If you are unsure which item is right for you, contact our sales office and WE will try to advise you on the best products.
X-FORM BUCKETS
16The X-Form range of Buckets key features are strength, build quality and design. Domex steel comes in stronger, lighter and more durable than mild steel equivalents with 'heavy duty' features such as heat treated wear edges, corner gussets, coastal grade two pack paint and a rolled bucket shell.
6' to 7'6" Wide Models Bolt on edge - To add a bolt on reversible toe plate, please add 'D' onto the end of the part number.
Part No. Capacity Width Height Depth Weight Kg £ RRP Bolt On Toe Plate £ RRPBK10-60 0.80m³ (28ft³) 1.85m (6') 0.83m (2'9") 1.11m (3'8") 345 £1120 £220 (150x20x1850mm)BK15-60 1.2m³ (43ft³) 1.85m (6') 0.99m (3'3") 1.33m (4'4") 410 £1265 £220 (150x20x1850mm)BK10-66 0.87m³ (31ft³) 2.00m (6'6") 0.83m (2'9") 1.11m (3'8") 362 £1135 £235 (150x20x2000mm)BK15-66 1.3m³ (46ft³) 2.00m (6'6") 0.99m (3'3") 1.33m (4'4") 429 £1275 £235 (150x20x2000mm)BK10-70 0.93m³ (33ft³) 2.15m (7') 0.83m (2'9") 1.11m (3'8") 379 £1150 £250 (150x20x2150mm)BK15-70 1.4m³ (49ft³) 2.15m (7') 0.99m (3'3") 1.33m (4'4") 448 £1290 £250 (150x20x2150mm)BK17-70 1.59m³ (56ft³) 2.15m (7') 1.06m (3'6") 1.41m (4'8") 477 £1430 £250 (150x20x2150mm)BK20-70 1.87m³ (66ft³) 2.15m (7') 1.14 (3,9") 1.53m (5') 512 £1480 £250 (150x20x2150mm)BK10-76 1.0m³ (35ft³) 2.30m (7'6") 0.83m (2'9") 1.11m (3'8") 396 £1165 £265 (150x20x2300mm)BK15-76 1.5m³ (53ft³) 2.30m (7'6") 0.99m (3'3") 1.33m (4'4") 465 £1300 £265 (150x20x2300mm)BK17-76 1.7m³ (60ft³) 2.30m (7'6") 1.06m (3'6") 1.41m (4'8") 497 £1465 £265 (150x20x2300mm)BK20-76 2.0m³ (71ft³) 2.30m (7'6") 1.14 (3,9") 1.53m (5') 534 £1510 £265 (150x20x2300mm)BK25-76 2.3m³ (83ft³) 2.30m (7'6") 1.23m (4') 1.66m (5'5") 607 £1715 £340 (200x20x2300mm)BK27-76 2.53m³ (89ft³) 2.30m (7'6") 1.28m (4'2") 1.76m (5'8") 662 £1980 £340 (200x20x2300mm)BK30-76 2.81m³ (99ft³) 2.30m (7'6") 1.35m (4'5") 1.82m (6') 736 £2030 £340 (200x20x2300mm)
BUCKETS
CHERRY
PRODUCTS
BK15-76
Part No. Capacity Width Height Depth Weight Kg £ RRP Bolt On Toe Plate £ RRPBK10-80 1.07m³ (38ft³) 2.45m (8') 0.83m (2'9") 1.11m (3'8") 413 £1230 £270 (150x20x2450mm)BK15-80 1.6m³ (57ft³) 2.45m (8') 0.99m (3'3") 1.33m (4'4") 486 £1375 £270 (150x20x2450mm)BK17-80 1.81m³ (64ft³) 2.45m (8') 1.06m (3'6") 1.41m (4'8") 517 £1550 £270 (150x20x2450mm)BK20-80 2.13m³ (75ft³) 2.45m (8') 1.14 (3,9") 1.53m (5') 556 £1600 £270 (150x20x2450mm)BK25-80 2.5m³ (88ft³) 2.45m (8') 1.23m (4') 1.66m (5'5") 631 £1750 £345 (200x20x2450mm)BK27-80 2.7m³ (96ft³) 2.45m (8') 1.28m (4'2" 1.76m (5'8") 687 £2015 £345 (200x20x2450mm)BK30-80 3.0m³ (106ft³) 2.45m (8') 1.35m (4'5") 1.82m (6') 736 £2080 £345 (200x20x2450mm)HB40-80D 3.56m³ (126ft³) 2.45m (8') 1.43m (4'8") 1.43m (4'8") 983 £3020 IncludedHB50-80D 4.44m³ (157ft³) 2.45m (8') 1.54m (5') 1.54m (5') 1071 £3530 IncludedBK25-86 2.66m³ (94ft³) 2.6m (8'6") 1.23m (4') 1.66m (5'5") 655 £1905 £355 (200x20x2600mm)BK27-86 2.87m³ (101ft³) 2.6m (8'6") 1.28m (4'2") 1.76m (5'8") 712 £2215 £355 (200x20x2600mm)BK30-86 3.19m³ (113ft³) 2.6m (8'6") 1.35m (4'5") 1.82m (6') 763 £2430 £355 (200x20x2600mm)HB40-86D 3.78m³ (133ft³) 2.6m (8'6") 1.43m (4'8") 1.43m (4'8") 1025 £3165 IncludedHB50-86D 4.72m³ (167ft³) 2.6m (8'6") 1.54m (5') 1.54m (5') 1118 £3900 IncludedBK30-90 3.38m³ (120ft³) 2.75m (9') 1.35m (4'5") 1.82m (6') 790 £2475 £360 (200x20x2750mm)HB40-90D 4.0m³ (141ft³) 2.75m (9') 1.43m (4'8") 1.43m (4'8") 1067 £3310 IncludedHB50-90D 5.0m³ (177ft³) 2.75m (9') 1.54m (5') 1.54m (5') 1165 £4195 Included
X-FORM BUCKETS
17The X-Form range of Buckets key features are strength, build quality and design. Domex steel comes in stronger, lighter and more durable than mild steel equivalents with 'heavy duty' features such as heat treated wear edges, corner gussets, coastal grade two pack paint and a rolled bucket shell.
BUCKETS
CHERRY
PRODUCTS
8' to 9' Wide Models Bolt on edge - To add a bolt on reversible toe plate, please add 'D' onto the end of the part number.HB BUCKETS - Hybrid buckets with an 8mm floor, curved sides, reinforced back and a bolt on reversable toe plate for maximum strength.
HB50-90D
X-FORM BUCKET BRUSHES
Bucket not Included in RRP Fitting Service Available - please call the sales office for details.
We offer the X-Form range of Bucket Brushes. With a galvanized body and adjustable frame our bucket brushes fit most tractor and telehandler buckets for a quick easy yard sweeping. Hard wearing, reverse action poly brushes offer a low cost and effective clearing solution.
18
Part Number Description £ RRP
BS60 Hydraulic Bucket Brush (to fit 6' bucket) c/w mounting brackets £1730
BS66 Hydraulic Bucket Brush (to fit 6'6" bucket) c/w mounting brackets £1765
BS70 Hydraulic Bucket Brush (to fit 7' bucket) c/w mounting brackets £1800
BS76 Hydraulic Bucket Brush (to fit 7'6" bucket) c/w mounting brackets £1840
BS80 Hydraulic Bucket Brush (to fit 8' bucket) c/w mounting brackets £1875
BS86 Hydraulic Bucket Brush (to fit 8'6" bucket) c/w mounting brackets £1915
CHERRY
PRODUCTS
BUCKETS
BS66
BS66
X-FORM MULTI BUCKETS
19The X-Form range of Multi Buckets offers strength, build quality and design. Domex steel comes in stronger, lighter and more durable than mild steel equivalents with ‘heavy duty’ features such as heat treated wear edges, coastal grade two pack paint, high capacity rams, high grade pins, and unbeatable clamping power. All models also come with a heat treated reversible toe plate, domex profiled tines and removable side panels as standard.
Brackets included Please note that if you order a bucket and grab for a Merlo or CAT machine you will need to add a check valve.
Part Number CT13 RRP £110
Part No. Capacity Width Height Depth Weight Kg £ RRP
MS-60 1.08m³ (38ft³) 1.85m (6') 1.12m (3'10") 1.16m (3'11") 682 £3000
MS-66 1.17m³ (41ft³) 2.00m (6'6") 1.12m (3'10") 1.16m (3'11") 709 £3085
MS-70 1.26m³ (44ft³) 2.15m (7') 1.12m (3'10") 1.16m (3'11") 745 £3180
MS-76 1.35m³ (48ft³) 2.30m (7'6") 1.12m (3'10") 1.16m (3'11") 781 £3240
MS-80 1.44m³ (51ft³) 2.45m (8') 1.12m (3'10") 1.16m (3'11") 807 £3370
BUCKETS
CHERRY
PRODUCTS
MS-76
MS-76
X-FORM+ BUCKETS
20X-Form+ is purposely designed for the most demanding conditions and is structually the strongest bucket in the current market. With it's 8mm shell. formed floor, integrated spill guard, reinforced side stiffeners, gussets and heavy duty brackets.
Part No. Capacity Width Height Depth Weight Kg £ RRP Bolt On Toe Plate
PB10-60D 0.78m3 (28ft3) 1.85m (6') 0.96m (3'2'') 0.98m (3'3") 526 £1900 Included (150x20x1850mm)
PB15-60D 1.16m3 (41ft3) 1.85m (6') 1.12m (3'8'') 1.16m (3'9") 630 £2180 Included (150x20x1850mm)
PB10-66D 0.84m3 (30ft3) 2.00m (6'6") 0.96m (3'2'') 0.98m (3'3") 551 £1905 Included (150x20x2000mm)
PB15-66D 1.26m3 (45ft3) 2.00m (6'6") 1.12m (3'8'') 1.16m (3'9") 658 £2185 Included (150x20x2000mm)
PB10-70D 0.91m3 (32ft3) 2.15m (7') 0.96m (3'2'') 0.98m (3'3") 576 £1945 Included (150x20x2150mm)
PB15-70D 1.35m3 (48ft3) 2.15m (7') 1.12m (3'8'') 1.16m (3'9") 687 £2210 Included (150x20x2150mm)
PB20-70D 1.84m3 (65ft3) 2.15m (7') 1.27m (4'2'') 1.38m (4'8") 789 £2540 Included (150x20x2150mm)
BUCKETS
CHERRY
PRODUCTS
PB15-70D
PB15-70DSUITABILITY
X-FORM+ BUCKETS
21X-Form+ is purposely designed for the most demanding conditions and is structually the strongest bucket in the current market. With it's 8mm shell. formed floor, integrated spill guard, reinforced side stiffeners, gussets and heavy duty brackets.
SUITABILITY
Part No. Capacity Width Height Depth Weight Kg £ RRP Bolt On Toe PlatePB10-76D 0.97m3 (34ft3) 2.30m (7'6") 0.96m (3'2") 0.98m (3'3") 601 £1965 Included (150x20x2300mm)
PB15-76D 1.45m3 (51ft3) 2.30m (7'6") 1.12m (3'8") 1.16m (3'9") 715 £2230 Included (150x20x2300mm)
PB20-76D 1.97m3 (70ft3) 2.30m (7'6") 1.27m (4'2") 1.38m (4'8") 822 £2590 Included (150x20x2300mm)
PB25-76D 2.27m3 (80ft3) 2.30m (7'6") 1.37m (4'6") 1.54m (5') 935 £3095 Included (200x20x2300mm)
PB10-80D 1.03m3 (36ft3) 2.45m (8') 0.96m (3'2") 0.98m (3'3") 627 £2110 Included (150x20x2450mm)
PB15-80D 1.55m3 (55ft3) 2.45m (8') 1.12m (3'8") 1.16m (3'9") 743 £2355 Included (150x20x2450mm)
PB20-80D 2.10m3 (72ft3) 2.45m (8') 1.27m (4'2") 1.38m (4'8") 855 £2760 Included (150x20x2450mm)
PB25-80D 2.42m3 (86ft3) 2.45m (8') 1.37m (4'6") 1.54m (5') 970 £3145 Included (200x20x2450mm)
PB25-86D 2.57m3 (91ft3) 2.60m (8'6") 1.37m (4'6") 1.54m (5') 1005 £3435 Included (200x20x2600mm)
PB25-90D 2.72m3 (96ft3) 2.75m (9') 1.37m (4'6") 1.54m (5') 1040 £3790 Included (200x20x2750mm)
BUCKETS
CHERRY
PRODUCTS
PB15-80D
PB10-76D
REHANDLING BUCKETS
Brackets Included / Rolled Options Available Telehandler Models. Other sizes and bespoke builds available.
Support straps 12mm thick run continuously around the bucket, integral with the attachment brackets to offer unrivalled strength and durability. These are supported by further cross section straps underneath and on the back of the bucket. The top of the bucket is flat, enhancing your view of the application, whilst also acting as an internal spill guard.
22
BUCKETS
SUITABILITY
CHERRY
PRODUCTS
CHERRY PRODUCTS
CB50F
CB11F
Part No. Capacity Width Height Depth Weight Kg £ RRPCB09SF 0.73m³ (26ft³) 1.98m (6'6") 0.75m (2'5") 0.77m (2'4") 320 £1410CB10SF 1.21m³ (43ft³) 1.98m (6'6") 0.84m (2'9") 1.12m (3'8") 380 £1535CB11SF 1.47m³ (52ft³) 1.98m (6'6") 0.90m (3') 1.14m (3'9") 415 £1560CB09AF 0.79m³ (28ft³) 2.13m (7') 0.75m (2'5") 0.77m (2'4") 365 £1470CB10AF 1.30m³ (46ft³) 2.13m (7') 0.84m (2'9") 1.12m (3'8") 400 £1580CB11AF 1.58m³ (56ft³) 2.13m (7') 0.90m (3') 1.14m (3'9") 490 £1600CB09F 0.84m³ (30ft³) 2.28m (7'6") 0.75m (2'5") 0.77m (2'4") 390 £1490CB10F 1.41m³ (50ft³) 2.28m (7'6") 0.84m (2'9") 1.12m (3'8") 410 £1615CB11F 1.69m³ (60ft³) 2.28m (7'6") 0.90m (3') 1.14m (3'9") 510 £1635CB50F 1.98m³ (70ft³) 2.28m (7'6") 0.96m (3'2") 1.26m (4'2") 550 £1710CB09FW 0.89m³ (32ft³) 2.45m (8') 0.75m (2'5") 0.77m (2'4") 416 £1515CB10FW 1.50m³ (53ft³) 2.45m (8') 0.84m (2'9") 1.12m (3'8") 437 £1650CB11FW 1.80m³ (64ft³) 2.45m (8') 0.90m (3') 1.14m (3'9") 544 £1675CB50FW 2.11m³ (74ft³) 2.45m (8') 0.96m (3'2") 1.26m (4'2") 580 £1750
CHERRY
PRODUCTS
GRAIN BUCKETS
23
Brackets Included For high capacity grain buckets, please refer to our X-form range. Other sizes and bespoke builds available.
Support straps 12mm thick run continuously around the bucket, with further cross section supports underneath and on the back of the bucket. Our unique side profile design allows the floor length not to be too long, thus maximising tear out force, whilst still allowing the bucket to crowd back level.
BUCKETS
CHERRY PRODUCTS
CB35W
CB30W
Part No. Capacity Width Height Depth Weight Kg £ RRP CB04A 1.30m³ (46ft³) 2.13m (7') 0.84m (2'9") 1.16m (3'10") 400 £1570CB05A 1.58m³ (56ft³) 2.13m (7') 0.90m (3') 1.21m (4') 420 £1710CB06A 1.84m³ (65ft³) 2.13m (7') 0.96m (3'2") 1.32m (4'4") 470 £1890CB04 1.41m³ (50ft³) 2.28m (7'6") 0.84m (2'9") 1.16m (3'10") 415 £1625CB05 1.69m³ (60ft³) 2.28m (7'6") 0.90m (3') 1.21m (4') 460 £1750CB06 1.98m³ (70ft³) 2.28m (7'6") 0.96m (3'2") 1.32m (4'4") 490 £1930CB07 2.26m³ (80ft³) 2.28m (7'6") 1.08m (3'6") 1.35m (4'5") 600 £2230CB04W 1.50m³ (53ft³) 2.45m (8') 0.84m (2'9") 1.16m (3'10") 443 £1685CB05W 1.80m³ (64ft³) 2.45m (8') 0.90m (3') 1.21m (4') 490 £1790CB06W 2.11m³ (74ft³) 2.45m (8') 0.96m (3'2") 1.32m (4'4") 520 £1970CB07W 2.41m³ (85ft³) 2.45m (8') 1.08m (3'6") 1.35m (4'5") 590 £2310CB08W 2.60m³ (90ft³) 2.45m (8') 1.12m (3'8") 1.36m (4'5") 610 £2420CB30W 2.80m³ (98ft³) 2.45m (8') 1.12m (3'8") 1.50m (4'11) 620 £2500CB31W 3.00m³ (106ft³) 2.45m (8') 1.23m (4') 1.52m (5') 850 £2760CB32W 3.25m³ (115ft³) 2.45m (8') 1.30m (4'3") 1.54m (5'1") 880 £3040CB33W 3.50m³ (124ft³) 2.45m (8') 1.32m (4'4") 1.56m (5'1") 920 £3185CB34W 3.75m³ (132ft³) 2.45m (8') 1.36m (4'6") 1.66m (5'5") 1000 £3555CB35W 4.00m³ (141ft³) 2.45m (8') 1.40m (4'7") 1.77m (5'10") 1075 £3785
BUCKETS
LOADER/SKIDSTEER BUCKETS
Designed and manufactured with strength and cost in mind, our new range of tractor loader buckets are perfect for smaller machines with up to a 2 tonne lifting capability. With widths ranging from 3'6" to 7' at various capacities.
24
Part No. Capacity Width Height Depth Weight Kg £ RRP £RRP Extra weld on toe plate* B36-020 0.20m3 1.07m (3'6") 0.61m 0.50m 108 £620 £100B4-023 0.23m3 1.22m (4') 0.61m 0.50m 123 £655 £105B46-026 0.26m3 1.37m (4'6") 0.61m 0.50m 145 £665 £110B5-029 0.29m3 1.53m (5') 0.61m 0.50m 156 £695 £115B56-032 0.32m3 1.68m (5'6") 0.61m 0.50m 162 £710 £120B6-035 0.35m3 1.83m (6') 0.61m 0.50m 168 £760 £125B4-036 0.36m3 1.22m (4') 0.66m 0.62m 132 £715 £105B46-041 0.41m3 1.37m (4'6") 0.66m 0.62m 160 £750 £110B5-045 0.45m3 1.53m (5') 0.66m 0.62m 165 £800 £115B56-050 0.50m3 1.68m (5'6") 0.66m 0.62m 175 £815 £120B6-054 0.54m3 1.83m (6') 0.66m 0.62m 186 £865 £125B66-059 0.59m3 1.98m (6'6") 0.66m 0.62m 204 £880 £130B7-063 0.63m3 2.14m (7') 0.66m 0.62m 216 £910 £135B5-073 0.73m3 1.53m (5') 0.86m 0.91m 205 £950 £115B56-080 0.80m3 1.68m (5'6") 0.86m 0.91m 229 £985 £120B6-087 0.87m3 1.83m (6') 0.86m 0.91m 246 £1025 £125
Brackets Included
SUITABILITY
CHERRY
PRODUCTS
CHERRY PRODUCTS
B6-054
MULTI PURPOSE BUCKETS
The grab design allows for wide opening (CB26 sizes; 1460mm. CB27 sizes; 1760mm. CB28 sizes; 2260mm) whilst also offering the long term reliability of our heavy duty fork and grabs. We offer all models with the choice of KV style or profile tines. All models also come as standard with a bolt on, reversible toe plate and removable side panels.
25
Part No. Capacity Width Height Depth Weight Kg £ RRPCB26S 1.13m³ (40ft³) 1.98m (6'6'') 1.04m (3'5") 0.93m (3') 632 £3090CB27S 1.74m³ (61ft³) 1.98m (6'6'') 1.20m (4') 1.10m (3'7") 710 £3185CB26A 1.27m³ (45ft³) 2.13m (7') 1.04m (3'5") 0.93m (3') 658 £3155CB27A 1.87m³ (66ft³) 2.13m (7') 1.20m (4') 1.10m (3'7") 765 £3310CB26 1.42m³ (50ft³) 2.28m (7'6") 1.04m (3'5") 0.93m (3') 685 £3255CB27 2.01m³ (71ft³) 2.28m (7'6") 1.20m (4') 1.10m (3'7") 820 £3465CB28 2.70m³ (95ft³) 2.28m (7'6") 1.40m (4'7) 1.40m (4'7) 1138 £3685CB26W 1.56m³ (55ft³) 2.45m (8') 1.04m (3'5") 0.93m (3') 700 £3375CB27W 2.15m³ (75ft³) 2.45m (8') 1.20m (4') 1.10m (3'7") 875 £3640CB28W 2.90m³ (102ft³) 2.45m (8') 1.40m (4'7) 1.40m (4'7) 1220 £3925
Brackets Included Add 'K' onto any part number for KV type tines. Add 'P' for Profile type tines.
BUCKETS
CHERRY
PRODUCTS
CHERRY PRODUCTS
CB27WP
CB26K
JCB TELETRUK BUCKETS
Quick release TLT or Changeeze brackets as standard. Other widths available POA
26
Part No. Capacity Width Height Depth Weight Kg £ RRP Bolt on Toe Plate
CB01FE1500 0.60m3 1.50m 0.83m 0.90m 350 £970 TP27/1500 - £255
CB26P1500 0.93m3 1.50m 1.00m 1.15m 480 £3020 Included
CBHDW1500 0.93m3 1.50m 1.00m 1.15m 485 £3425 Included
CB15FE1700 1.00m3 1.70m 0.92m 1.17m 400 £3755 TP27/1700 - £255
Built on the same principle designs as our standard bucket ranges, our JCB TLT range offers reliable and well built options for a variety of applications. Working closely with Dealers and Customers alike, we have produced the following range of Buckets to suit your TLT machine, but as always with us, one off builds are welcomed.
BUCKETS
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
CB15FE1700
CB01FE1500 CB26P1500
CBHDW1500
LOW PROFILE / POTATO BUCKETS
The Cherry Low Profile/Potato Bucket has an extended floor length compared to a standard rehandling bucket allowing the user to achieve a bucket load at minimum entry into the pile. This, along with the round bar edging, helps to protect against damage to the root. As standard the bucket also comes with corner strengthening gussets and support straps which run continuously around the bucket.
27
Part No. Capacity Width Height Depth Weight Kg £ RRP
CB12S 1.21m³ (43ft³) 1.98m (6'6") 0.73m (2'5") 1.21m (4') 475 £1760CB13S 1.61m³ (60ft³) 1.98m (6'6") 0.89m (2'11") 1.32m (4'4") 510 £1905CB12A 1.30m³ (46ft³) 2.13m (7') 0.73m (2'5") 1.21m (4') 495 £1800CB13A 1.84m³ (65ft³) 2.13m (7') 0.89m (2'11") 1.32m (4'4") 530 £1940CB12 1.41m³ (50ft³) 2.28m (7'6") 0.73m (2'5") 1.21m (4') 500 £1835CB13 1.98m³ (70ft³) 2.28m (7'6") 0.89m (2'11") 1.32m (4'4") 570 £1975CB12W 1.50m³ (53ft³) 2.45m (8') 0.73m (2'5") 1.21m (4') 520 £1870CB13W 2.11m³ (74ft³) 2.45m (8') 0.89m (2'11") 1.32m (4'4") 600 £2015
Brackets Included - Other sizes/capacity’s/bespoke designs available. The brackets are set at the correct angle for your machine and welded directly on to the straps to spread the load.
BUCKETS
CHERRY
PRODUCTS
CHERRY PRODUCTS
CB13
CB13
DIGGING BUCKETS
Brackets Included All models come with a bolt on reversible toe plate. Alternatively, digging teeth can be fitted upon request.
The Cherry heavy duty digging bucket matches the profile and shape of the rolled rehandling bucket range, its built to a higher specification for the most demanding work. This digging bucket is made from 6mm sheet, has full length side gussets as standard, 12mm thick heavy duty side stiffeners and extra wear plates on the underside.
28
Part No. Capacity Width Height Depth Weight Kg £ RRP
CB23S 0.73m³ (26ft³) 1.98m (6'6") 0.75m (2'6") 0.77m (2'6") 330 £1980
CB24S 1.21m³ (43ft³) 1.98m (6'6") 0.84m³ (2'9") 1.00m (3'3") 475 £2250
CB23A 0.79m³ (28ft³) 2.13m (7') 0.75m (2'6") 0.77m (2'6") 340 £2090
CB24A 1.30m³ (46ft³) 2.13m (7') 0.84m³ (2'9") 1.00m (3'3") 490 £2340
CB23 0.84m³ (30ft³) 2.28m (7'6") 0.75m (2'6") 0.77m (2'6") 360 £2140
CB24 1.41m³ (50ft³) 2.28m (7'6") 0.84m³ (2'9") 1.00m (3'3") 510 £2375
CB23W 0.89m³ (32ft³) 2.45m (8') 0.75m (2'6") 0.77m (2'6") 400 £2190
CB24W 1.50m³ (53ft³) 2.45m (8') 0.84m³ (2'9") 1.00m (3'3") 550 £2420
BUCKETS
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
CB23WTP27
CB24BG02DT
4 IN 1 BUCKETS
The Cherry 4 in 1 Bucket is built upon a heavy duty design for use in a variety of applications. Manufactured as standard with 3 bucket wear edges, protected heavy duty high capacity hydraulic cylinders and high grade zinc plated pins. The Product can be used as a Bucket, Grader, Clamp and a Digger.
29
Part No. Capacity Width Height Depth Weight Kg £ RRP
CB41FE035 0.25m3 (9ft3) 1.50m (5') 0.86m 0.62m 275 £3530
CB41FE025 0.28m3 (11ft3) 1.60m (5'3") 0.86m 0.62m 305 £3610
CB41FE015 0.42m3 (15ft3) 1.70m (5'7") 0.86m 0.62m 365 £3685
CB41S 0.73m3 (26ft3) 1.98m (6'6") 0.90m 0.80m 565 £3779
CB41A 0.79m3 (28ft3) 2.13m (7') 0.90m 0.80m 585 £3955
CB41 0.84m3 (30ft3) 2.28m (7'6") 0.90m 0.80m 600 £4155
CB41W 0.89m3 (32ft3) 2.45m (8') 0.90m 0.80m 620 £4355
Brackets Included - To swap the bolt on reversible toe plate for digging teeth please add 'DT' to the end of any of the above part numbers.All models come with a bolt on reversable toe plate as standard.
BUCKETS
CHERRY
PRODUCTS
CHERRY PRODUCTS
CB41DT
CB41
TOE TIP BUCKETS
Our range of Toe Tip Buckets allow for a greater height of tip, which benefits some applications that use high side trailers for instance. The design is based upon large high capacity cylinders which enter the bucket through boxed in sections. The Bucket itself is built with our normal strengthening designs, with the bracket frame angles tweaked for each bracket type to allow for maximum tip to be achieved.
30
Part No. Capacity Width Height Depth Weight Kg £ RRPHCT15-66 1.30m³ (45ft³) 1.98m (6'6") 0.94m (3'1") 0.97m (3'2") 1010 £4850HCT15-70 1.40m³ (50ft³) 2.13m (7') 0.94m (3'1") 0.97m (3'2") 1050 £5050HCT17-70 1.60m³ (57ft³) 2.13m (7') 0.99m (3'3") 1.04m (3'5") 1080 £5250HCT17-76 1.70m³ (60ft³) 2.30m (7'6") 0.99m (3'3") 1.04m (3'5") 1120 £5450HCT20-76 1.85m³ (65ft³) 2.30m (7'6") 1.04m (3'5") 1.10m (3'7") 1155 £5650HCT20-80 2.00m³ (71ft³) 2.45m (8') 1.04m (3'5") 1.10m (3'7") 1195 £5850HCT25-76 2.30m³ (81ft³) 2.30m (7'6") 1.15m (3'9") 1.25m (4'1") 1275 £6300HCT25-80 2.50m³ (88ft³) 2.45m (8') 1.15m (3'9") 1.25m (4'1") 1325 £6600Part No. Capacity Width Height Depth Weight Kg £ RRPHCT32-80D 3.20m³ (113ft³) 2.45m (8') 1.35m (4'5") 2.00m (6'7") 1500 £9242HCT36-80D 3.60m³ (127ft³) 2.45m (8') 1.35m (4'5") 2.00m (6'7") 1530 £9385HCT34-86D 3.40m³ (120ft³) 2.60m (8'6") 1.35m (4'5") 2.00m (6'7") 1650 £9528HCT38-86D 3.80m³ (134ft³) 2.60m (8'6") 1.35m (4'5") 2.00m (6'7") 1680 £9671HCT36-90D 3.60m³ (127ft³) 2.75m (9') 1.35m (4'5") 2.00m (6'7") 1800 £9814HCT40-90D 4.00m³ (141ft³) 2.75m (9') 1.35m (4'5") 2.00m (6'7") 1830 £9957
BUCKETS
CHERRY
PRODUCTS
Brackets Included - Bolt on edge - To add a bolt on reversible toe plate, please add ‘D’ to the end of the part number
CHERRY PRODUCTS
HCT20-80
HCT20-80
BUCKETS
WASTE BUCKETS WITH CLAW
Brackets Included - Grab tines have a leading edge welded across tips, bespoke builds available. Note: Waste Buckets in high intensity environments carry a 12 month bucket and grab warranty. Parts such as pins & hydraulic cylinders carry a 6 month warranty.
SG - Split Grab (not independently operated) RRP £395
The grab is made with 38mm Ø high grade zinc plated pins, open & close stops and a profile design based on our heavy duty fork & grab range. High capacity cylinders are taken from our 4 in 1 bucket and the bucket itself is based on our top end digging bucket. With a bolt on reversible toe plate as standard.
31
Part No. Capacity Width Height Depth Weight Kg £ RRP
CBHDW40 0.84m³ (30ft³) 2.28m (7'6") 0.90m (3') 0.77m (2'6") 817 £5205
CBHDW41 1.41m³ (50ft³) 2.28m (7'6") 0.99m (3'3") 1.00m (3'3") 875 £5560
CBHDW42 1.69m³ (60ft³) 2.28m (7'6") 1.05m (3'5") 1.06m (3'6") 907 £5715
CBHDW40W 0.89m³ (32ft³) 2.45m (8') 0.90m (3') 0.77m (2'6") 853 £5460
CBHDW41W 1.50m³ (53ft³) 2.45m (8') 0.99m (3'3") 1.00m (3'3") 915 £5685
CBHDW42W 1.80m³ (64ft³) 2.45m (8') 1.05m (3'5") 1.06m (3'6") 945 £5835
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
CBHDW41W
CBHDW41WSG
BUCKETS
ROOT CROP BUCKETS
The Cherry Root Crop Bucket has 25mm round bars in the front and on the back. The standard spacing of these bars is 100mm centre to centre which gives 75mm gaps. Bar spacing can be adjusted to suit individual requirements. To reduce damage to the crop, a round bar is also welded to the edge of the bucket. Other specs are available.
32
Brackets Included Special builds are also welcomed.
Part No. Capacity Width Height Depth Weight Kg £ RRPCB17S 0.73m³ (26ft³) 1.98m (6'6") 0.75m (2'5") 0.77m (2'6") 374 £1960CB18S 1.21m³ (43ft³) 1.98m (6'6") 0.84m (2'9") 1.00m (3'3") 390 £2130CB17A 0.79m³ (28ft³) 2.13m (7') 0.75m (2'5") 0.77m (2'6") 398 £2050CB18A 1.30m³ (46ft³) 2.13m (7') 0.84m (2'9") 1.00m (3'3") 423 £2215CB19A 1.84m³ (65ft³) 2.13m (7') 0.96m (3'2") 1.36m (4'6") 442 £2360CB17 0.84m³ (30ft³) 2.28m (7'6") 0.75m (2'5") 0.77m (2'6") 406 £2100CB18 1.41m³ (50ft³) 2.28m (7'6") 0.84m (2'9") 1.00m (3'3") 440 £2275CB19 1.98m³ (70ft³) 2.28m (7'6") 0.96m (3'2") 1.36m (4'6") 465 £2420CB17W 0.89m³ (32ft³) 2.45m (8') 0.75m (2'5") 0.77m (2'6") 430 £2120CB18W 1.50m³ (53ft³) 2.45m (8') 0.84m (2'9") 1.00m (3'3") 468 £2340CB19W 2.10m³ (74ft³) 2.45m (8') 0.96m (3'2") 1.36m (4'6") 490 £2490
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
CB19W
CB17
BAG FILLING BUCKET
The Cherry Products Ltd range of buckets have been well established in the agricultural industry for over 40 years. With a wide range of buckets available, standard or bespoke builds suitable for various applications we can make a bucket to suit your every need!
33
BUCKETS
CHERRY
PRODUCTS
SUITABILITY
Part No. Capacity Width Height Depth Opening Hatch Weight Kg £ RRP
CHBB65 0.65m3 1.27m 1.40m 1.00m 700mm2 268 £3020
CHBB160 1.60m3 1.50m 1.63m 1.32m 700mm2 391 £3250
Brackets Included The Cherry bag filling buckets offer a time effective and easy way of filling, moving, stacking and loading bags. For filling material such as sand and gravel, bag hooks are slotted over the hangers on the rear of the bucket and a trap door mechanism allows material to fall freely and acurately. The bucket design, with front wear edge, allows a full bucket load to be achieved before emptying into the bag.
CHERRY PRODUCTS
CHBB65
CHBB160
BUCKET PARTS
We offer a range of Bucket Accessories. Items such as digging teeth and nuts/bolts we have in stock and can be despatched same day. For the other items we can supply for you, or we can offer a 'supply and fit' service. Please contact our Sales Office for details.
34
Part No. Description £ RRP
DL01 Double Welded Leading Edge £260
DL02 Double Welded Leading Edge and Side Gussets £330
DL03 Short Side Gussets £100
DL04 Full Length Side Gussets £275
BG01 Full Width Spill Guard £445
BG02 Half Width Spill Guard £370
DT27 Digging Teeth £23
PB01 Plow Bolt and Nut £4
XFTPB01 X-Form Bolt On Reversible Toe Plate Bolt £4
BUCKETS
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
REPLACEMENT TOE PLATES
35
BUCKETS
CHERRY
PRODUCTS
CHERRY PRODUCTS
Weld On Length Section £ RRPTP26S/1980 1.98m (6'6") 150 x 20 mm £205TP26A/2133 2.13m (7') 150 x 20 mm £210TP26/2286 2.28m (7'6") 150 x 20 mm £215TP26AW/2450 2.45m (8'½") 150 x 20 mm £220TP26WW/2591 2.59m (8'6") 150 x 20 mm £220TP26WWW/2743 2.74m (9') 150 x 20 mm £225Bolt On Length No. Holes Section Hole Centres £ RRPTP27SS/1500 1.50m (4'11") 5 200 x 20 mm 285mm £265TP27S/1980 1.98m (6'6") 7 200 x 20 mm 285mm £275TP27A/2133 2.13m (7') 8 200 x 20 mm 285mm £285TP27/2286 2.28m (7'6") 8 200 x 20 mm 285mm £295TP27AW/2450 2.45m (8'½") 8 200 x 20 mm 320mm £310TP27WW/2591 2.59m (8'6") 8 200 x 20 mm 320mm £325TP27WWW/2743 2.74m (9') 9 200 x 20 mm 320mm £340
All bolt on toe plates include nuts and bolts.We keep a massive selection of Bolt on and Weld on Toe Plates in stock, which can usually be despatched on the same day of order. The below lists recognise our standard, stock toe plates. If you require a special toe plate that is not listed above, please contact us and we will endeavor to meet your needs.
SUITABILITY
FLAT BALE GRABS
36
BALE HANDLING
Our bale handling range is built specifically to suit the existing industry sizes. We use cast bale claws which work in unison with a reliable proven design for the safe holding of the bales. Our standard range covers the most common bale configurations, but we can manufacture bespoke units as required.
Part No. Will Handle £ RRP
CH25 8 x Conventional Bales (Flat 8) £2215
CH25A 10 x Conventional Bales (Flat 10) £2800
CH26 2 x 800mm Wide Bales / Flat 8 Conventional Bales £2595
CH26B 3 x 800mm Wide Bales / 2 x 1200mm Wide Bales £3100
CH26BLB 3 x 1200mm Wide Bales £3610
Brackets Included - Please confirm bale size and make when ordering. If you would like any further information on our bale grab range or compatibility options, please contact our sales office.
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
CH26
CH25
BALE SPIKES
All products in our Bale Spike Range are based on the same Heavy Duty principal design, with a durable box section frame, Kverneland style tines and tine bushes. Brackets are included on all models. If you require extra bushes in the frame work, please ask.
37
Part No. Will Handle Width Height Depth £ RRP
CH27 1 x Round Bale 1.27m 0.81m 0.98m £700
CH27A5 2 x 5' Round Bales 1.52m 0.81m 0.98m £965
CH27B 1 x Rectangular Bale 1.52m 0.81m 0.98m £950
CH27AE*2 x Round Bales / 3 x Rectangular Bales
(Up to 800mm high each)1.71m 1.26m* 0.98m £1100
CH27BE* 3 x Rectangular Bales (upto 800mm high each) 1.71m 1.26m* 0.98m £1050
CH27AEF* 2x Round Bales / 3 x Rectangle Bales
(Up to 800mm height each)1.68m 1.52m* 0.98m £1700
BALE HANDLING
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
Brackets Included - Note: Part numbers with 'E*' and ‘EF*’ on the end have an adjustable, removable extension. When closed adds 440mm to the height shown in the table above, fully extended adds 900mm to the height shown in the table above.
CH27AEF*
CH27 CH27A5 CH27BE*
CH27AE*
OVER ARM BALE GRAB &SIDE SQUEEZE BALE GRAB
38
BALE HANDLING
SUITABILITY
OVER ARM BALE GRAB Bale Type Open Width Closed Width Capacity £ RRPCHW2C For Square or Round Bales 1950mm 500mm 1000kgs £1585
Brackets Included / SWL 1000kgs
Brackets Included / SWL 1400kgs The heavy wall, circular tubed arms will protect bale wrapping and ensure a secure grip throughout.
SIDE SQUEEZE BALE GRAB Bale Type Open Width Closed Width Capacity £ RRP
CHW3 For Square or Round Bales 1940mm 1025mm 1400kgs £2495
CHERRY
PRODUCTS
For use on both rounds and squares, the CHW2C is designed to minimise wrap tears whilst offering a secure grip for precise stacking. A high stroke, high capacity cylinder means the grab is universal for both round and squares, no need to get out of the cab to change pivot pins.
The side squeeze bale grab is the ultimate grab for strength, versatility and design. For use on wrapped or unwrapped bales, squares or rounds, the heavy duty design of the CHW3 will maximise productivity.
CHERRY PRODUCTS
The Cherry Products range of bale handling attachments have a certified record in the industry of reliabilty and robust design. We have various attachments for all tasks involving bale handling and if you have a specific idea in mind, such as a bale pattern for your flat bale grab, give us a call and we will try our best to help.
CHW2C
CHW3
SOFT HANDS BALE GRAB &BALE GRAB WITH ROLLERS
39The Cherry Products range of bale handling attachments have a certified record in the industry of reliabilty and robust design. We have various attachments for all tasks involving bale handling and if you have a specific idea in mind, such as a bale pattern for your flat bale grab, give us a call and we will try our best to help.
The soft hands bale grab allows round bales to be stacked conventionally or on their ends with ease. The tubular arms and heavy duty back frame combine to grab both wrapped and unwrapped bales. With the unit able to handle round bales of 800 - 1600mm diameter it covers the vast majority of possibilities.
Using a 'roller' system, the grab can be used for wrapped bales, with the rollers, large flat face and domed ends to protect the bale wrapping. A single hydraulic cylinder squeezes the bale to ensure quick and easy stacking.
BALE HANDLING
CHERRY
PRODUCTS
SUITABILITY
CHW4
CH30C
BALE GRAB WITH ROLLERS Bale Type Open Width Closed Width Capacity £ RRPCH30C Round Bales 1440mm 590mm 1000kgs £1720
SOFT HANDS BALE GRAB Bale Type Suits Bale Diameter Capacity £ RRPCHW4 For 800-1600ø Round Bales 800-1600mm 1000kgs £1890
Brackets Included / SWL 1000kgs
Brackets Included / SWL 1000kgs Removable rollers, 2 x KV style tines make the attachment a double bale spike with hydraulic cylinder preventing the bales from spinning.
CHERRY PRODUCTS
Part No. Description Maimum Capacity Width Height Depth £ RRP
CP39EC Class ITA 2 (Euro 8 Brackets Only) 1500kgs 1000 400 55 £635
CP39 Class ITA 2 2500kgs 1168 406 62 £775
CP40 Class ITA 3 4500kgs 1168 508 62 £825
CP50 Class ITA 4 6000kgs 1268 635 62 £945
CP41 JCB 50mm Bar Fork Carriage 3500kgs 1250 1165 310 £980
CP51 JCB 57mm Bar Fork Carriage 6000kgs 1250 1165 310 £1015
CP32 Merlo Fork Carriage 4500kgs 1225 600 120 £890
CPLG Load/Brick Guard £275
Brackets Included - Price for Carriage only. Our pallet fork carriages have a safe working load stamped onto the serial plate. The lift capacity of the machine and pallet tines must never be exceeded.
PALLET FORK CARRIAGES
40
PALLET FORKS
The benefit of having a pallet fork carriage is that you can pick up and drop off your tines like any other attachment, rather than having to remove them manually.
SUITABILITY
CHERRY
PRODUCTS
CHERRY PRODUCTS
CP40
CP41
41
PALLET FORK TINES
PALLET FORKS
Part No. To Fit Carriage Maximum Capacity Width Depth Length £ RRPITA2EC CP39EC 1500kgs 80 40 1100 £500ITA2B CP39 2500kgs 100 40 1200 £600ITA3B CP40 4500kgs 100 50 1200 £820ITA4A CP50 6000kgs 150 50 1200 £985JCBRB50 CP41 3500kgs 100 50 1200 £750JCBRB60 CP51 6000kgs 125 50 1200 £1135
Prices shown for Tines only
Prices shown for Bar only
ITA Tines fit onto Headstocks or Pallet Fork Carriages with a castellated top and bottom rail fitted - ITA2 Tines have a 16'' space between the top and bottom rails. They would fit our CP39 Pallet Fork Carriage - ITA3 Tines have a 20'' space between the top and bottom rail. They would fit our CP40 Pallet Fork Carriage. ITA4 Tines have a 25" space between the top and bottom rail, they will fit our CP50 Pallet Fork Carriage. We offer 2 different types of JCB Round Bar Forks. The JCBRB50 tines will fit a 50mm Ø JCB bar and our CP41 floating fork carriage. The JCBRB60 Tines will fit a 57mm Ø JCB bar and fit our CP51 floating fork carriage.
These will either fit our pallet fork carriages, your exisitng headstock or both. We can get tines rated to your specific needs, or have them specially made if you require something slightly different. As with all pallet fork attachments, the load must never exceed the SWL of the tines, the pallet fork carriage or the lift capacity of the machine.
CHERRY
PRODUCTSPart No. Description Maximum Capacity Width Diameter Depth £ RRPTBJCBRB50 50mm Ø Tine Bar 3500kgs 1335mm 50mm Ø N/A £150TBJCBRB60 57mm Ø Tine Bar 6000kgs 1365mm 57mm Ø N/A £200
CHERRY PRODUCTS
PALLET FORK EXTENSIONS
42
PALLET FORKS
SUITABILITY
CHERRY
PRODUCTS
CHERRY PRODUCTS
Part No. Length To Suit a Maximum Sized of Fork SWL @ Load Centre Weight Kg
(Pair) £ RRPCHFEX100-1500 1.50m Long 100 x 50mm 3000kgs @ 500mm 47 £485CHFEX100-1650 1.65m Long 100 x 50mm 3000kgs @ 500mm 51 £495CHFEX100-1800 1.80m Long 100 x 50mm 3000kgs @ 500mm 56 £515CHFEX100-2000 2.00m Long 100 x 50mm 3000kgs @ 500mm 62 £540CHFEX100-2250 2.25m Long 100 x 50mm 3000kgs @ 500mm 69 £560CHFEX100-2400 2.40m Long 100 x 50mm 3000kgs @ 500mm 75 £565CHFEX125-1500 1.50m Long 125 x 50mm 3400kgs @ 500mm 50 £495CHFEX125-1650 1.65m Long 125 x 50mm 3400kgs @ 500mm 55 £505CHFEX125-1800 1.80m Long 125 x 50mm 3400kgs @ 500mm 60 £525CHFEX125-2000 2.00m Long 125 x 50mm 3400kgs @ 500mm 67 £550CHFEX125-2250 2.25m Long 125 x 50mm 3400kgs @ 500mm 74 £570CHFEX125-2400 2.40m Long 125 x 50mm 3400kgs @ 500mm 80 £575CHFEX150-1800 1.80m Long 150 x 60mm 5800kgs @ 600mm 66 £530CHFEX150-2000 2.00m Long 150 x 60mm 5800kgs @ 600mm 73 £555CHFEX150-2400 2.40m Long 150 x 60mm 5800kgs @ 600mm 88 £590As with all pallet fork attachments, the SWL of the machine, pallet fork carriage, and tines must never be exceeded.
TINE MOUNTED BRUSH
43
PALLET FORKS
The Cherry fork mounted brush offers a cost efficient option for yard clearing. The fork slots suit a variety of fork types; upto a maximum fork section of 150 x 60mm at 683mm hole centres.
Tine MountedCHERRY
PRODUCTS
Part No. Width To Suit a Maximum Sized of Fork No. Brushes Weight Kg £ RRP
CFB1500 1.50m 150 x 60mm 8 51 £1215
CFB1800 1.80m 150 x 60mm 8 61 £1320
CFB2400 2.40m 150 x 60mm 8 95 £1425
CHERRY PRODUCTS
SUITABILITY
CFB1800
CFB1800
SAFETY ACCESS PLATFORMS
44
MAN PLATFORMS
Part No. Details Width Height Depth Weight Kg SWL £ RRP
CM24D Two Man 1.60m 1.40m 1.10m 230 500kgs £1180
CM24D/8 Two Man 2.44m 1.40m 1.10m 330 500kgs £1400
Tine Fixings only included in RRP shown above. Galvanised As Standard.Bracket mount only + £220 to RRP. Both Tine Fixings and Bracket mount + £300 to RRP add AG02 to any of the above part numbers.
To comply with HSE regulations (PM28), the Cherry range of platforms include - kick boards - weldmesh back - harness points - non slip chequer plate floor - tine fixing - access gate - full safety instructions (including stickers) & a certificate of conformity.
SUITABILITY
CHERRY
PRODUCTS
CHERRY PRODUCTS
CM24D
CM24D/8
Part No. Extras £ RRP
AG02 Bracket & tine fixing. Allows platform to fit either the machine’s headstock or pallet tines £300
AG03 Hinge down roll over rail. Gives height protection for working indoors £295
AG05 Harness and Helmet Kit £180
SMARTBOXES (NEW MODEL)
SMARTBOXES
Part Number Description £ RRPCSBLARGE Empty Weight of 450kg (Optional Extra: Internal Steel Slabs 750kg RRP £1445) £2993CSBSTANDARD Empty Weight of 400kg £2735CSBSMALL Empty Weight of 350kg £2565CSBW+__KG Concrete Weight - a choice of 600kg, 800kg or 1000kg c/w pallet tine fixings £400CSBGBP200S Galvanised Steel Belly Plate Standard Box £700CSBGBP200L Galvanised Steel Belly Plate Large Box £825CSBSW650KG Small Box Concrete Weight 650kg £400NPS Name Plate Stainless Steel (Letters only) + Extra for logo design RRP £75 £200CFOURV 4 inch vice £170CSBSTANDARDFT Fuel tank £645CCTV1 Full kit including 5" monitor hard wired £440CCTV2 2 cameras with wiring and no monitor £360
*Please note that the CSBSMALL will only hold a 650kg concrete block
As standard the boxes come with Cat 2/3 Linkage, LED lights, a lockable tool cabinet either side. Optional extras include fuel storage containers, concrete weight blocks c/w pallet tine fixings, painted or stainless steel custom nameplates and a CCTV system.
SUITABILITY
CHERRY
PRODUCTS
45
CHERRY PRODUCTS
46
IMPLEMENT MOVER & STONE FORK
SUITABILITY
CHERRY PRODUCTS
The Cherry Implement Mover is a must for most farms and dealerships. Fits onto your Telehandler headstock and allows it to move any implement with Three Point Linkage, ideal for moving those large, awkward items such as ploughs and other cultivation equipment. The Cherry Stone Fork gives a quick and efficient way of removing stones/rocks from cultivated land. With a heavy duty design and ample visibility the Cherry Stone Fork is available in one width with KV style tines and comes as standard with a tine guard.
CHERRY
PRODUCTS
Removable 50mm towing ball complete with clevis - RRP £250
Suitable for both Tractor linkage and telehandler brackets.
Part Number Description £ RRP
CTH3PL Implement Mover for Telehandler to Three Point Linkage Adaptor Plate
(Fixed Lower Link Arms) £1375
CTH3PLAImplement Mover for Telehandler to Three Point Linkage Adaptor Plate
(Adjustable Width Lower Linkage) £1900
Part Number Description Width Tine Type £ RRP
CSF66K Stone Fork for Telehandler for
Three Point Linkage or Bracket Mounted1.98m (6’6”) 1100mm long, KV Type £2643
OTHER ATTACHMENTS
CTH3PLA
CSF66K
47
BIG BAG LIFTERS
Part No. Bag Type Arm Centres Height Depth Weight Kg £ RRP
CAB02 600kg/1000kg 0.85m/1.27m 1.14m 2.30m 280 £1530
Part No. No. of Bags Arm Centres Height Depth Weight Kg £ RRP
CAB03 600kg/1000kg 0.85m/1.27m 1.14m 2.30m 290 £1775
Manually Adjustable Arms - Brackets Included
Hydraulically Adjustable Arms - Brackets Included
The design allows for extra height to be gained, easy unloading of curtain sided lorries and avoids roof damage. Each model is adjustable to suit all bag sizes, meaning that bags can be stacked and stored with precision. End restraints' on the arms help prevent bags sliding off, and a bump bar limits bag swinging.
Our Hydraulic Adjustable Bag Lifter is the most versatile bag lifter in the market place. A single hydraulic cylinder allows you to adjust the arm centres from the comfort of the cab - the perfect solution if you have a mixture of 600kg and 1000kg bags.
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
OTHER ATTACHMENTS
CAB02
CAB03
GRAIN PUSHER
Part No. Width Height Length Weight Kg £ RRPCGP08 2.45m (8') 1.03m 2.40m (8') 514 £1905CGP10 2.45m (8’) 1.03m 3.05m (10') 642 £2025CGP12 2.45m (8’) 1.03m 3.66m (12') 770 £2085CGP14 2.45m (8’) 1.03m 4.26m (14') 898 £2145CGP16 2.45m (8’) 1.03m 4.87m (16') 1028 £2265
Part No. Description £ RRPEXT02 2 ft long bolt on frame extension (c/w fitting bolts) £270EXT04 4 ft long bolt on frame extension (c/w fitting bolts) £395EXT06 6 ft long bolt on frame extension (c/w fitting bolts) £530EXT08 8 ft long bolt on frame extension (c/w fitting bolts) £665
Brackets Included
The Cherry Grain Pusher over specification, heavy duty design, providing many benefits throughout. A key focus of the design is the circular tube frame which reduces the number of grain traps, keeping grain in the store and not the yard. If extra length is required, a bolt on extension can be added for a relatively low cost. All models come with a nylon edge (for floor and blade protection) as standard. The large 8' wide, 8mm thick blade offers unrivalled strength and material movement.
CHERRY
PRODUCTS
48
CHERRY PRODUCTS
OTHER ATTACHMENTS
CGP12EXT04
CGP12EXT04
PICK UP HITCHES
Our standard range of hitches are shown above, however please call the sales team to discuss other machines. The Cherry range of hitches are rated to tow 10 tonne and lift 2 tonne. Although only the standard range is listed, we have done models in the past for JCB, Manitou, Scorpion, Bobcat and John Deere Forage Harvesters.
49
Please note: Our hitches are not supplied with the bolts or hydraulic pipework. We offer a fitting service for £750 RRP (customer to arrange transport).As standard our hitches are produced to tow a trailer at a running height of approximately 18 inches. Travel range on a Telehandler Hitch, 457mm. Travel on a Forage Harvester Hitch, 547mm.
Part Number Description £ RRP
PUH02/NHFR New Holland Forage Harvester FR9000 Pick Up Hitch £2200
PUH02/JDFR John Deere Forage Harvester Pick Up Hitch £2200
PUH02/KRFR Krone Forage Harvester Big X Pick Up Hitch £2200
PUH02/CNH CASE IH/New Holland LM Telehandler Pick Up Hitch £1450
PUH02/MER Merlo Rear Mounted (Not 26.6) Pick Up Hitch £1450
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
OTHER ATTACHMENTS
PUH02
PUH02/MER
SHEAR GRABS - FL MODEL
The FL series has been specially developed for use by a front loader and mini wheel loader. The FL models are wider than the machine, which is possible because the weight of the shear grab is lower. Block widths are from 10 to 240cm, the block depth is 65cm and the height of the block is 70cm. Capacity varies from 0.46m3 to 1.09m3 .
50
Part No. Width x Depth x Height = m³ Weight Kgs £ RRPFL1000 1 x 0.65 x 0.7m = 0.46m³ 480 £3925FL1000DB 1 x 0.65 x 0.7m = 0.46m³ 510 £4160FL1200 1.2 x 0.65 x 0.7m = 0.55m³ 540 £4160FL1200DB 1.2 x 0.65 x 0.7m = 0.55m³ 560 £4390FL1400 1.4 x 0.65 x 0.7m = 0.64m³ 600 £4390FL1400DB 1.4 x 0.65 x 0.7m = 0.64m³ 610 £4625FL1600 1.6 x 0.65 x 0.7m = 0.73m³ 650 £4625FL1600DB 1.6 x 0.65 x 0.7m = 0.73m³ 660 £4915FL1800 1.8 x 0.65 x 0.7m = 0.82m³ 700 £4915FL1800DB 1.8 x 0.65 x 0.7m = 0.82m³ 710 £5305FL2000 2 x 0.65 x 0.7m = 0.91m³ 705 £5445FL2000DB 2 x 0.65 x 0.7m = 0.91m³ 760 £5680FL2200 2.2 x 0.65 x 0.7m = 1m³ 750 £5680FL2200DB 2.2 x 0.65 x 0.7m = 1m³ 810 £6145FL2400 2.4 x 0.65 x 0.7m = 1.09m³ 860 £6145FL2400DB 2.4 x 0.65 x 0.7m = 1.09m³ 860 £6380
All models are available with tines or a closed bucket bottom (DB) Necessary hydraulic power = 25 l/min - 180 bar (max 50 l/min - 200 bar)
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
OTHER ATTACHMENTS
SHEAR GRABS - NP MODEL
51The NP Series is suitable for use by a front loader, lifting mast, wheel loader and telescopic handler. Block widths vary between 160 to 240cm, the block depth is 85cm and the block height is 86cm. Various capacities are available ranging from 1.20m3 to 1.80m3 . For the larger NT Series please visit our website at www.cherryproducts.co.uk
Part No. Width x Depth x Height = m³ Weight Kgs £ RRPNP1600 1.6 x 0.85 x .86m = 1.2m³ 705 £5475NP1600DB 1.6 x 0.85 x .86m = 1.2m³ 760 £5805NP1800 1.8 x 0.85 x .86m = 1.35m³ 749 £5950NP1800DB 1.8 x 0.85 x .86m = 1.35m³ 804 £6340NP2000 2 x 0.85 x .86m = 1.5m³ 793 £6340NP2000DB 2 x 0.85 x .86m = 1.5m³ 848 £6570NP2200 2.2 x 0.85 x .86m = 1.65m³ 835 £6570NP2200DB 2.2 x 0.85 x .86m = 1.65m³ 892 £7035NP2400 2.4 x 0.85 x .86m = 1.8m³ 936 £7035NP2400DB 2.4 x 0.85 x .86m = 1.8m³ 936 £7505
All models are available with tines or a closed bucket bottom (DB) Necessary hydraulic power = 25 l/min - 180 bar (max 50 l/min - 200 bar)
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
OTHER ATTACHMENTS
34A Eastern Foam Extinguisher 3.4m Standard Foam & CO2
ExtinguishersEastern High Performance
Foam Extinguisher
13A Standard Foam 1.3m
Increased Safety + Reduced Costs
Replaces
EXTINGUISHERS
“We have recently fitted Eastern Extinguisher’s new composite foam extinguishers across all our depots. We have been able to significantly reduce the amount of extinguishers needed due to the composite extinguishers’ excellent extinguishing range and their capacity to be used on electrical equipment fires. Improving safety whilst reducing costs has been a real no brainer for us! We have also been really pleased with the ongoing customer support provided by Eastern’s team.”
Martin Smith Health and Safety Manager LC Vehicle Hire
52
CHERRY PRODUCTS
OTHER ATTACHMENTS
A Product of InnovationBritish made using state-of-the-art clean manufacturing processes. Our patented extinguishers employ technology pioneered by the motor racing, defence, aircraft and aerospace industries.
Saving...On average our customersbenefit from a 47% Cost Saving over a 10 year period 47%
Increased Fire Protection
Environmentally Friendly Composite Construction
No Annual Maintenance Charges
20 Year Life Cycle
No Service Parts and Fewer Refills
Watercourse Safe Biodegradable Foam
Low Energy Manufacturing
100% Recyclable Extinguisher
Kevlar Aramid type woven core for Super Strength
UV Protective Casing
Marine Grade Anti Corrosive Components
10 Year Guarantee
Simple visual inspection by a member of your staff offering additional benets for:Unquie Online Fire Extinguisher Management System
Less Confusion as our Pulse Technology + High Performance Foam can be used on live electrical equipment
1.5% Standard Foam98.5% Water
11.5% High Performance Foam
88.5% Water
Lighter and Safer
EXTINGUISHERS
53
CHERRY PRODUCTS
OTHER ATTACHMENTS
Our multi-risk, foam composite fire extinguisher covers class A, B, and Electrical fires up to 1000volts! Meaning you will need just one extinguisher compared to the two traditional Co2 and foam units. Additionally, there is no service contract necessary. Our P50 composite fire extinguishers are fully self-servicable by a member of your own team. This means we could save you an average of 47% in cost!
Part No. Description £ RRPP50SAFESIGN1 AFFF Foam Photoluminescent ID Sign - Landscape £4P50SAFESIGN2 AFFF Foam Photoluminescent ID Sign - Portrait £4FB 1.2X1.2 Fire Blanket 1.2m x 1.2m £24P50SAFESIGN5 Fire Blanket Photoluminescent ID Sign - Landscape £4F/SBRACKET Black designer P50 Stand (Suitable for 6-9kg Extinguishes) £28EST3 Single Moulded Stand (Red Plastic) £39EST7 Double Moulded Stand (Red Plastic) £66CAB0240 Red PVC Cover (Suitable for 6-9Kg Extinguishers) £11CABINET1 Single cabinet - Easy Wall (Suitable for 6-9Kg Extinguishers) £75
Part No. Marine Part No. Type Contents Fire Types Capacity Fire Rating Filled Weight Height £ RRPP50F2 P50F2M
FOAM AFFFAB &
Electrical
2 Litre 8A - 55B 2.8kg 410mm £66P50F6 P50F6M 6 Litre 34A - 183B 8.5kg 570mm £150P50F9 P50F9M 9 Litre 43A - 233B 11.7kg 640mm £173
CHERRY
PRODUCTS
LOG GRABS
Brackets Included
Our Log Grab range consists of 4 models covering a host of applications and machine types.
54
Part Number Description £ RRP
CHLG01 Single Arm Log Grab on a ITA3 pallet carriage frame with ITA3B Tines. £2920
CHLG02 Double Arm Log Grab with profiled frame and fixed lower tines 275 - 1007mm Ø Logs £3240
CHLG03Single Arm Heavy Duty Log Grab with 50mm thick profiled lower tines that are built to 'float'
to enable them to find their way into the pile. £3665
CHLG04 Double Arm Heavy Duty Log Grab with 50mm thick profiled lower tines that are built to 'float'
to enable them to find their way into the pile. £4265
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
OTHER ATTACHMENTS
CHLG02
CHLG01
CHLG04
WOOD BINS & TIPPING SKIPS
55The Cherry Bracket Mounted Wood Bin has been purposely designed and built to give a versatile solution to loading, moving and storing wood.
Pallet Tine Mounted Tipping SkipManufactured from high strength, low alloy 3mm steel, the X-Form tipping skip range is made up of 2 models; the auto locking ALS-120 and TS-120 manual tipping model.
Part Number Description Capacity Width Height Depth £ RRP
ALS-120 Auto locking tipping skip 1.20m3 1.35m 1.00m 1.85m £700
TS-120 Manual release tipping skip 1.20m3 1.35m 1.15m 1.75m £700
Part Number Description Capacity Width Height Depth £ RRP
CWB1455 Bracket Mounted Wood Bin (1.46m3) 1.46m3 1.50m 1.12m 1.47m £1520
CHERRY
PRODUCTS
SUITABILITY
Bracket Mounted Wood Bin - Features:• 4mm shell • Weld on mounting brackets • Mounting legs for free standing and stacking. Other Sizes Available.
CHERRY PRODUCTS
OTHER ATTACHMENTS
CWB1455
ALS-120
BOX GRADER
Three Point Linkage Fittings Bolt on replaceable wear runners either side of the frame complete the heavy duty design.Did you know? Suitable for a variety of industries, our Box Graders are currently being used on rally tracks to level off top surfaces in between events
The Box Grader is suitable for a variety of horsepower tractors, it gives a cost effective solution to breaking up and levelling surfaces. Ideal for farm drives, tracks and rally schools. The ultra-hard wearing reversible front tines break up the immediate surface with relative ease.
56
Part Number Description £ RRP
CBS60 6' wide three point linkage mounted box grader £3080
CBS70 7' wide three point linkage mounted box grader £3240
CBS80 8' wide three point linkage mounted box grader £3405
CBS90 9' wide three point linkage mounted box grader £3665
CBS100 10' wide three point linkage mounted box grader £3730
CHERRY
PRODUCTS
SUITABILITY
CHERRY PRODUCTS
OTHER ATTACHMENTS
SNOW PLOUGHS & SNOW BLADES
Three point linkage included on all models. All models come as standard at 9' which covers an 8' track when angled. Other widths available on request.
57
Part Number Description £ RRPCSP80A Snow blade (folded front blade) manually adjustable to the left or right £3855CSP80AHYD Snow blade (folded front blade) hydraulically adjustable to the left or right £4295
Update:- Please Note: Wheels are included in the price.Features: Ideal for clearing roads, driveways, car parks and yards etc. Heavy duty wheel set included. Suitable for Telehandlers, Loaders & Tractors. Folded plate structure ensures strength and durability. 3 point linkage fixings (bracket mount on request). 200 x 50mm thick Rubber. Height of blade 800mm
CHERRY
PRODUCTS
SUITABILITY
Part Number Description £ RRPCSP100A Snow plough (rolled front blade) manually adjustable to the left or right £4635CSP100AHYD Snow plough (rolled front blade) hydraulically adjustable to the left or right £5125
Update:- Please Note: Wheels are included in the price.Features: Heavy Duty - Ideal for contract clearing heavy snow on roads, driveways, car parks, yards etc. Suitable for high horsepower tractors. Durable 8mm rolled plate ensures strength and reliability. 3 point linkage fixings (bracket mount on request). 200 x 50mm thick Rubber. Height of plough 1000mm
CHERRY PRODUCTS
OTHER ATTACHMENTS
CSP100AHYD
CSP80A
HEADSTOCK CONVERSIONS(with manual locking pin/s)
58
HEADSTOCKS
Conversion With Manual Locking Pin/sCA03A - £1400 RRP CA03B - £1600 RRP CA03C - £1900 RRPConversion To: Conversion To: Conversion To:Manitou Pin And Cone JCB Q Fit *With Tine Facility*JCB Toolcarrier JCB Q Fit *With No Tine Facility* Merlo ZM3 (Single Pin)JCB Compact Toolcarrier (Quick Hitch) Volvo (JCB Industrial/Europe)Euro 8 Scorpion (Large Kramer) 50mm Ø PinKramer (standard) 40mm Ø Pin Chillton/Mailleux MXNew Holland CATMF/Bobcat (Telehandler) SandersonWeidemann/Hoftrac Merlo ZM2
Trima SMS 5
Quickie No.3 (ALO)
*All prices shown for manual conversions are based on a single pin to slide through the brackets and headstock to lock on an attachment. If you would like an over centre handle please call the sales office for a quote.*
When ordering please state the configuration after the part number with the machine type coming first and the bracket type that it needs to be converted to pick up second. For example: CA03B-Kramer KT447 (machine) to be converted to Pin and Cone (the required bracket to pick up).
SUITABILITY
CHERRY
PRODUCTS
CHERRY PRODUCTS
CA03B
CA03A
HEADSTOCK CONVERSIONS(with hydraulic locking pin/s)
HEADSTOCKS
SUITABILITY 59
CHERRY PRODUCTS
Conversion With Hydraulic Locking Pin/sCA04A - £1750 RRP CA04B - £1950 RRP CA04C - £2245 RRPConversion To: Conversion To: Conversion To:Manitou Pin And Cone JCB Q Fit *With Tine Facility*JCB Toolcarrier JCB Q Fit *With No Tine Facility* Merlo ZM3 (Single Cylinder)JCB Compact Toolcarrier (Quick Hitch) Merlo ZM2Euro 8 Volvo (JCB Industrial/Europe)Kramer (standard) 40mm Ø Pin Scorpion (Large Kramer) 50mm Ø PinNew Holland Chillton/Mailleux MXMF/Bobcat (Telehandler) CATWeidemann/Hoftrac Sanderson
Trima SMS 5
Quickie No.3 (ALO)
When ordering please state the configuration after the part number with the machine type coming first and the bracket type that it needs to be converted to pick up second. For example: CA03B-Kramer KT447 (machine) to be converted to Pin and Cone (the required bracket to pick up).
CHERRY
PRODUCTS
*If you have a Kramer or Scorpion machine and would like to have a Change-Over valve fitted to your Headstock please add COV-L (For Liebherr built machines) or COV-K (For Kramer built machines) and add £335 to the RRP. If you would like to have the Change-Over valve sent in kit form
please add COV-L-KIT (For Liebherr built machines) or COV-K-KIT (For Kramer built machines) and add £180 to the RRP.*
CA04B
CA04A
NEW BUILD HEADSTOCK(with manual locking pin/s)
60
HEADSTOCKS
CHERRY PRODUCTS
New Build Headstock Manual Locking pin/sCA05A - £2315 CA05B - £2700 CA05C - £2900 CA05D - £3160From tractor loader or telehandler to pick up: From tractor loader or telehandler to pick up: From tractor loader or telehandler to pick up: From tractor loader or telehandler to pick up:Euro 8 Manitou JCB Q Fit *No Tine Facility JCB Q Fit *With Tine FacilityTrima SMS 5 Pin and Cone Volvo (JCB Europe/Industrial) Merlo ZM3 (Single Pin)Weidemann/Hoftrac JCB ToolcarrierQuickie No.3 (ALO) JCB Compact Toolcarrier (Quick Hitch)
Kramer (standard) 40mm Ø PinScorpion (large Kramer) 50mm Ø PinNew HollandMF Bobcat (telehandler)Chillton/Mailleux MXCATSandersonMerlo ZM2
When ordering please state the configuration after the part number with the machine type coming first and the bracket type that it needs to be converted to pick up second. For example: CA05B-Kramer KT447 (machine) to pick up Pin and Cone attachments.
SUITABILITY
CHERRY
PRODUCTS
*All prices shown for manual Headstocks are based on a single pin to slide through the brackets and headstock to lock on an attachment. If you would like an over centre handle please call the sales office for a quote.*
CA05D
CA05D
NEW BUILD HEADSTOCK(with hydraulic locking pin/s)
HEADSTOCKS
61
CHERRY PRODUCTS
*If you have a Kramer or Scorpion machine and would like to have a Change-Over valve fitted to your Headstock please add COV-L (For Liebherr built machines) or COV-K (For Kramer built machines) and add £335 to the RRP. If you would like to have the Change-Over valve sent in kit form please add COV-L-KIT (For Liebherr built machines) or COV-K-KIT (For Kramer built machines) and add £180 to the RRP.*
CHERRY
PRODUCTS
New Build Headstock Hydraulic Locking pin/sCA06A - £2725 CA06B - £3200 CA06C - £3315 CA06D - £3600From tractor loader or telehandler to pick up: From tractor loader or telehandler to pick up: From tractor loader or telehandler to pick up: From tractor loader or telehandler to pick up:Euro 8 Manitou JCB Q Fit *No Tine Facility JCB Q Fit *With Tine FacilityTrima SMS 5 Pin and Cone Volvo (JCB Europe/Industrial) Merlo ZM3 (Single Pin)Weidemann/Hoftrac JCB ToolcarrierQuickie No.3 (ALO) JCB Compact Toolcarrier (Quick Hitch)
Kramer (standard) 40mm Ø PinScorpion (large Kramer) 50mm Ø PinNew HollandMF Bobcat (telehandler)Chillton/Mailleux MXCATSandersonMerlo ZM2
When ordering please state the configuration after the part number with the machine type coming first and the bracket type that it needs to be converted to pick up second. For example: CA06B-Kramer KT447 (machine) to pick up Pin and Cone attachments.
CA06D
CA06B
HEADSTOCKS
CHERRY PRODUCTSADAPTOR PLATES(with manual locking pin/s)
62
CHERRY
PRODUCTS
When ordering please state the configuration after the part number with the machine bracket type coming first and the bracket type that the Adaptor Plate needs to pick up second. For example: CA01B-Euro (machine bracket type) to pick up Pin and Cone (the required bracket to pick up). Adaptor Plates will derate the capacity of the machine and in some configurations can foul the machine's tyres. For information on this please contact our Sales Office. Adaptor Plates are a comprimise and as such may not work as well as an original or complete replacement unit in relation to achievable crowd and dump angles. Whilst we make every effort to compensate this, this does need to be recognised.
Conversion With Manual Locking Pin/sCA01A - £1400 RRP CA01B - £1600 RRP CA01C - £1900 RRPTo Pick Up: To Pick Up: To Pick Up:Manitou Pin And Cone JCB Q Fit *With Tine Facility*JCB Toolcarrier JCB Q Fit *With No Tine Facility* Merlo ZM3 (Single Pin)JCB Compact Toolcarrier (Quick Hitch) Volvo (JCB Industrial/Europe)Euro 8 Scorpion (Large Kramer) 50mm Ø PinKramer (standard) 40mm Ø Pin Chillton/Mailleux MXNew Holland CATMF/Bobcat (Telehandler) SandersonWeidemann/Hoftrac Merlo ZM2
Trima SMS 5
Quickie No.3 (ALO)
CHERRY
PRODUCTS
CA01A
CA01A
*All prices shown for manual conversions are based on a single pin to slide through the brackets and headstock to lock on an attachment. If you would like an over centre handle please call the sales office for a quote.*
CHERRY PRODUCTSADAPTOR PLATES(with hydraulic locking pin/s)
63
CHERRY
PRODUCTS
When ordering please state the configuration after the part number with the machine bracket type coming first and the bracket type that the Adaptor Plate needs to pick up second. For example: CA02B-Euro (machine bracket type) to pick up Pin and Cone (the required bracket to pick up). Adaptor Plates will derate the capacity of the machine and in some configurations can foul the machine's tyres. For information on this please contact our Sales Office. Adaptor Plates are a comprimise and as such may not work as well as an original or complete replacement unit in relation to achievable crowd and dump angles. Whilst we make every effort to compensate this, this does need to be recognised.
Adaptor Plate With Hydraulic Locking Pin/sCA02A - £1750 RRP CA02B - £1950 RRP CA02C - £2245 RRPTo Pick Up: To Pick Up: To Pick Up:Manitou Pin And Cone JCB Q Fit *With Tine Facility*
JCB Toolcarrier JCB Q Fit *With No Tine Facility* Merlo ZM3 (Single Cylinder)
JCB Compact Toolcarrier (Quick Hitch) Volvo (JCB Industrial/Europe)
Euro 8 Scorpion (Large Kramer) 50mm Ø Pin
Kramer (standard) 40mm Ø Pin Chillton/Mailleux MX
New Holland CAT
MF/Bobcat (Telehandler) Sanderson
Weidemann/Hoftrac Merlo ZM2
Trima SMS 5
Quickie No.3 (ALO)
CHERRY
PRODUCTS
HEADSTOCKS
CA02B
CA02A
Agricultural Materials Handling EquipmentOathill, Enstone, Chipping Norton, Oxon OX7 4ED, UK
Tel: 01608 678197Fax: 01608 677778
Your dealer for Cherry Products Limited:
www.cherryproducts.co.uk I email: [email protected]
CHERRY PRODUCTS
CHERRY PRODUCTS
follow us @cherryproducts I @cherryproductsltd I cherryproducts