your solution partner...picmg 2.30 rc 1.0 -compactpci plus io specification approved : september,...

1

BackplanesEnclosures &Components

CabinetsRotary

SwitchesSystem

Platforms

Your Solution Partner

2


CabinetsRotary

SwitchesSystem

Platforms

Elma Electronic is a global manufacturer of products for housing

electronic systems.

The company provides everything from components such as modular

enclosures, cabinets and backplanes, up to complete standard or custom

system platforms. Elma also manufactures precision rotary switches.

Short Presentation Elma & ElincomShort Presentation Elma & Elincom

3


CabinetsRotary

SwitchesSystem

Platforms


4


CabinetsRotary

SwitchesSystem

Platforms

Elma Trenew Electronic is represented in The Netherlands by

Elincom Electronics since 1999


ELMA Trenew Electronic Germany, Pforzheim

5


CabinetsRotary

SwitchesSystem

Platforms

COMPARISONCOMPARISON

Compact PCI Plus/Serial Compact PCI Plus/Serial

vs.vs.

MicroTCAMicroTCA

CompactPCI goes HighCompactPCI goes High--SpeedSpeed

6


CabinetsRotary

SwitchesSystem

Platforms

History of PICMG SpecificationsHistory of PICMG Specifications

PICMG 2.0CompactPCI

PICMG 2.16Packet Switching

PICMG 3.0AdvancedTCA

MTCA.0MicroTCA

DATA RATE

TIME2001 20061999 2002 2005

PICMG EXP.0CompactPCI Express

ABANDONED

PICMG 2.30CompactPCI Plus IO

2009

IN DEVELOPMENT

PICMG CPCI S.0

CompactPCI Serial

2009-2010

7


CabinetsRotary

SwitchesSystem

Platforms

� An extension to the CPCI Standard which adds following features on the Backplane:

� PCI Express

� SATA

� USB

� ETHERNET

� Development started in January 2008

� PICMG 2.30 RC 1.0 - CompactPCI Plus IO Specification

Approved: September, 2009

� PICMG CPCI S.0 - CompactPCI Serial Specification

Started: April, 2009Planned End: beginning of 2011Actual Status: in balloting phase

CompactPCICompactPCI PlusPlus//SerialSerial –– Short OverviewShort Overview

8


CabinetsRotary

SwitchesSystem

Platforms

MTCA

• Use of AMCs as daughter cards not

anymore as mezzanines in ATCA

• Cost reduction:

- Mechanic

- Cooling

- Management

Basic ideasBasic ideas

cPCI Plus/Serial

• Still maintain the parallel cPCI bus

• Use the same cPCI mechanic

• Compared to CPCI adds High-Speed

serial interconnection protocols like

PCIE, SATA, USB, ETHERNET

9


CabinetsRotary

SwitchesSystem

Platforms

Overview MechanicOverview Mechanic

MTCA

• New mechanic based on AMC Card

formats

• Smaller physical box size dedicated

for size constrained applications

cPCI Plus/Serial

• Standard cPCI mechanic based on 19”

Technology, meaning unchanged:

� Chassis

� Front Panel

� Handle

� Other accessories

10


CabinetsRotary

SwitchesSystem

Platforms

Card FormatCard Format

MTCA

• AMC format with Card Edge Connectors

cPCI Plus/Serial

Several form factors available e.g.:

• Height: 3U or 6U

• Width: 4HP or 8HP

• Based on Eurocard format

• Same format used by standard cPCI

Several form factors available e.g.:

• Single Module or Double Modules

• Compact-(3HP), Mid- (4HP) and

Full-Size (6HP)

11


CabinetsRotary

SwitchesSystem

Platforms

MTCA

• No Rear I/O specified

Rear I/ORear I/O

cPCI PLUS/SERIAL

• Rear I/O available

• No Rear I/O by MTCA thereforeAMC - Front I/O Cards used foroffering this feature

12


CabinetsRotary

SwitchesSystem

Platforms

MTCA

• No Rear I/O specified

Rear I/ORear I/O

cPCI PLUS

• Rear I/O available

• No Rear I/O by MTCA therefore AMC - Front I/O Cards used foroffering this feature

• Rear I/O available in XTCA

13


CabinetsRotary

SwitchesSystem

Platforms

Rear I/O by XTCARear I/O by XTCA

MTCA XTCA

14


CabinetsRotary

SwitchesSystem

Platforms

ConnectorConnector

MTCA

• Card Edge AMC connectors:

� Press-fit

� SMD

� Compression mount

cPCI Plus/Serial

• PICMG 2.30 System Slot:

� 3M Connector only on the Card

Module (no change on the

backplane)

� Supports 5Gb/s

� Fully compatible with the standard

cPCI connector on the backplane

15


CabinetsRotary

SwitchesSystem

Platforms

ConnectorConnector

cPCI Plus/Serial

• cPCI Plus.0 System Slot, Peripheral Slots

and Rear I/O:

� FCI Airmax Connector supports 12Gb/s and offers 184 pin pairs / 3U Board

� IEEE 1101 compliant

� Very robust and prepared for harsh environment (connector walled on four sides)

� The plug is on the card and the receptacle on the backplane: as in VME bus systems/contrary to cPCI

16


CabinetsRotary

SwitchesSystem

Platforms

Electrical Performance and Data RatesElectrical Performance and Data Rates

MTCA

• High speed serial point-to-point

links on the backplane for extremely high

data rates. Supported protocols:

� 10 Gb Ethernet up to 5Gb/s

� PCIE up to 5Gb/s

� SAS/SATA

� Serial Rapid IO

cPCI Plus/Serial

• Migrates from Parallel Bus to modern

Serial Point to Point Topology

Parallel bus structure

Slot 1 Slot 2 Slot 3

Serial Topology

+

17


CabinetsRotary

SwitchesSystem

Platforms

Electrical Performance and Data Rates: MTCAElectrical Performance and Data Rates: MTCA

18


CabinetsRotary

SwitchesSystem

Platforms

Electrical Performance and Data Rates: CPCI SerialElectrical Performance and Data Rates: CPCI Serial

19


CabinetsRotary

SwitchesSystem

Platforms

Electrical Performance and Data Rates: MTCAElectrical Performance and Data Rates: MTCA

MTCA CPCI SERIAL

• 2 x MCH (MTCA Carrier Hard)

• up to 12 AMC (Advance Mezzanine Card)

• PCI-e Switching via MCH

• Use of CPU Boards not limited (AMC1-12)

• Maximum 1 x CPU Board

• No PCI-e Switching

20


CabinetsRotary

SwitchesSystem

Platforms

Power ConceptPower Concept

MTCA

• Power Module: should use the

output backplane power connector in

order to distribute radially the payload

+12V and management +3.3V, so that

each load can be managed

independently of the others.

cPCI Plus/Serial

• Power Input: no dedicated

connector, power interface of the cPCI

Plus modules through the slot pins.

• +12V is the main voltage of the

cPCI Serial modules

Power Module from ERICSSON

21


CabinetsRotary

SwitchesSystem

Platforms

Power ConceptPower Concept

MTCA

The Power Module should use INPUT

Connectors which support AC or DC

feeds

Power dissipation:

� 48W / Single Modules

� 80W / Double Modules

cPCI Serial / Plus

• Power dissipation: 60W / Slot

• Power supplies +12V OUTPUT shall be used, pluggable or fix mount, but there is not possible to have a 1:1 use of the CPCI standard power supplies

Power connector from ept


CabinetsRotary

SwitchesSystem

Platforms

Management (Power and Cards)Management (Power and Cards)

MTCA

• Central management and data

switching via MicroTCA Carrier Hub

• New Power Module with

management functionality necessary

(but other solutions available to reduce

costs)

cPCI Plus

• No central management specified

• All transactions are controlled by CPU


CabinetsRotary

SwitchesSystem

Platforms

source

• Radially distrubuted (+12V) payload, each load can be managed independently of the others

• Management power (+3.3V)

Point of loadGain +3.3V management power from +12V

Micro controler

Management for power

module and cooling unit

MTCA Power ManagementMTCA Power Management

24


CabinetsRotary

SwitchesSystem

Platforms

MTCA

• Suitable for Telecom applications but

Industrial solutions available as well

• Intelligent management for all FRUs

(Field Replaceable Units), such as the

power module or cooling units

• Hot-swap management of all plug-in

elements

• Various AMCs available

• Rear IO: not available by MTCA

but available in XTCA

• PCI-e Switching

MTCA vs. MTCA vs. cPCIcPCI Plus: ConclusionsPlus: Conclusions

cPCI PLUS/Serial

• For traditional cPCI users with a need to

use high speed protocols

• For user who wants to use proven cPCI

cards and mechanic

• Proven system architecture

• Connector can be used in a rugged

environment

• Rear IO: available

• No PCI-e Switching but Single Star

25


CabinetsRotary

SwitchesSystem

Platforms

THANK YOU !THANK YOU !

26


CabinetsRotary

SwitchesSystem

Platforms

Your Solution Partner

your solution partner...picmg 2.30 rc 1.0 -compactpci plus io specification approved : september,...

Documents