(800) 413-8783 ■ www.SDCsecurity.com

IP Pro™ Access Control SolutionSingle Door Electric Latch Retraction Application

SYSTEM OPERATION

Door is normally closed and secured by an exit panic device.

Authorized Access: Presenting a valid card/fob or entering a valid user code on the keypad will momentarily retract the latch on the exit device, permitting access. The unlock time will be configured by the access control programming. The door may also be programmed for maintained access (dogging).

Manual Override: Key override is available from the unsecure side via optional active trim.

Authorized Egress: Free egress is available at all times by pressing the exit device pushpad, retracting the latch, and opening the door.

Low Voltage: System is powered by a regulated & filtered power supply with 12VDC output for access control equipment and 24VDC output for locking hardware to maximize efficiency.

IP-based Access Control: User-friendly programming interface via a built-in web server, accessible from any networked PC.

1 Access ControlIP Controller

Wiegand Reader Options (Choose one):3

5

4

IP Network AC Mains

S6100E LR100 Kit

IPRW

IPDCE

920PW 923PW

OPTIONAL CREDENTIALSFobs - HID1346-10Cards - HID1326-25

OPTIONAL:Latch & REXMonitoring

OPTIONAL BATTERY BACKUPRB12V4-2

3

5

21

Power Supply12 and 24VDC Output

Prox Reader or Keypad-Prox Combo

2

602RFX12VR

PTH-4Q* PT-3V PT-5*

Exit Device Electric Latch Retraction(Choose one):

Available formany brands

Complete Device or Field Retrofit Kit

(Choose one):*Power Transfer DeviceWire Transfer Hinge or Loops

4

PROJECT NAME:

DIST.: DWG. NO.:DRAWN BY: DATE:LOCATION.: CONTACT:

SO NO.: REVTITLE:-801 Avenida Acaso

Camarillo, CA 93012t 805.494.0622 ~ f 805.494.8861www.sdcsecurity.com

IP Pro Single Door Applications

--

IP Pro™ 1-Door System with Electric Latch Retraction

- service@sdcsecurity.com IPPRO Apps-07/2015 Page 9 of 9

-

© 2015 Security Door Controls Printed in U.S.A

NOTE: ALL WIRING MUST BE REVIEWED AND APPROVED BY THE PROJECT ENGINEER ASSIGNED TO THE LOCATION FOR ITS CORRECTNESS AND SUITABILITY FOR THE APPLICATION IN WHICH THE EQUIPMENT IS INSTALLED AND OPERATED. ALL WIRING MUST CONFORM TO NATIONAL, STATE, AND LOCAL CODES FOR CLASS 2 FIRE PROTECTION AND CONTROL DEVICES.

22/6C

(2) 18/2C

ACMains

(3) COND

602RFPowerSupplyx 12VR

Ethernet

NOCNC NOCNC

MAIN RELAYAUX RELAY

OP3

OP2 0V

AUX

1D

C PB

SENSECLOCK/D1DATA/D0+12V0VREDGREEN

A B 0V A B 0V 0V+1

2VM

AINS

PRES

ENT

B/G

LTA

MP

2-16 DOORS 17-32

DEFAULT

DHCP

OFF 1

2IP Pro™ Door Controller

(Door #1)

SDC P/N: IPDCE

24VDC

12VD

C

RJ-45

To PC or Local Network

Cat5 (or better)

FACTORY INSTALLED JUMPER(REMOVE ONLY IF FIRE ALARM INTERFACE IS CONNECTED)

VOLTAGE SELECTIONSWITCHES(SET FOR 24VDC)

TO 120VAC PRIMARYVOLTAGE CONNECTION

Battery InputTerminals

DC Voltage Output

Terminals

24 12

+ - + - C

602RF

+- +-

12VR

System Components:(1) 602RFX12VR – 1 Amp Regulated Power Supply w/ Fire Alarm Interface & 12VDC Output Module.(1) IPDCE – IP Pro™ Single Door ControllerChoose (1) Card Reader:

IPRW – Indoor/Outdoor Proximity Card Reader920PW – Single Gang Indoor/Outdoor Proximity Card Reader w/ Integral Keypad923PW – Frame mount Indoor/Outdoor Proximity Card Reader w/ integral Keypad

Choose (1) Electric Latch Retraction (ELR) Hardware Option:S6100E – Complete Rim Panic Device with ELRLR100 Kit – Field or Factory installed ELR Kit. Refer to the SDC website for available brands & models.

Choose (1) Power Transfer Device:PTH-4Q – 4-wire Power Transfer HingePT-3V – Armored Door Cord with Termination BoxPT-5 – Heavy Duty Power Transfer Device, Concealed Mortise Mount

(1) RB12V4-2 – Two 5Ah 12VDC Backup Batteries (Optional)(1) HID1346-10 – Ten Proximity Key Fobs (Optional)

+ -RB12V4

5 AMP HOUR BATTERY

+ -RB12V4

5 AMP HOUR BATTERY

SDC P/N: 602RFX12VR

EntryCard

Reader

SDC P/N: RB12V4-2

IP Network

18/4C

IP ProDoor

Controller

SDC P/N: IPRW

SDC P/N: 920PW

SDC P/N: 923PW

PowerTransfer

Hinge

RedBlk

WhtGrn

RedBlk

Spare

Spare

SDC P/N: PTH-4Q

To 2nd Door Controller

SDC P/N: IPDSEPTH-4QPower

TransferHinge

S6000EOR

LR100 SeriesLatch Retraction Kit

(Installed in Panic Device)

{To Optional

Latch or REX Monitoring

LR100 SeriesLatch

RetractionKit

Red (+)

Blk (-)

LR100 Series Latch Retraction/Dogging Kitavailable for these brands:

• Von Duprin• Yale• Corbin Russwin• Dor-O-Matic• Hager• Adams Rite• Dorma• Stanley K2• IDC• TownSteel

• Arrow• PHI• Falcon•Detex• Cal-Royal • PDQ• Falcon IR•Marshall Best• Sargent• SDC•Tell

Red (+)

Blk (-)

SDC S6000 Series Exit Device with factory installed Electric Latch Retraction Option

Complete Device for Rim, Mortise, or Surface Vertical Rod

UL Listed:ANSI/BHMA Grade1 Panic Exit Hardware, 3-Hr Fire Exit Hardware.