12. building works_ finishing
TRANSCRIPT
-
8/13/2019 12. Building Works_ Finishing
1/8
SH:12/FINISHING WORK
Code No. Description Unit Rate
12.1 12 mm cement plaster in single layer including cost of
materials required and finishing even and smooth and
curing complete.
12.1.1 In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) sqm R 103.40
12.1.2 In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) sqm R 90.20
12.1.3 In cement mortar 1 : 5 ( 1 cement : 5 fine sand ) sqm R 83.00
12.1.4 In cement mortar 1 : 6 ( 1 cement : 6 fine sand ) sqm R 76.90
12.2 15 mm cement plaster in single layer including cost of
materials required and finishing even and smooth and
curing complete.
12.2.1 In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) sqm R 121.20
12.2.2 In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) sqm R 105.40
12.2.3 In cement mortar 1 : 5 ( 1 cement : 5 fine sand ) sqm R 96.9012.2.4 In cement mortar 1 : 6 ( 1 cement : 6 fine sand ) sqm R 89.60
12.3 20 mm cement plaster in single layer including cost of
materials required and finishing even and smooth and
curing complete.
12.3.1 In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) sqm R 149.40
12.3.2 In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) sqm R 128.80
12.3.3 In cement mortar 1 : 5 ( 1 cement : 5 fine sand ) sqm R 117.80
12.3.4 In cement mortar 1 : 6 ( 1 cement : 6 fine sand ) sqm R 108.30
12.4 6 mm cement plaster in single layer including cost of
materials required and finishing even and smooth and
curing complete.
12.4.1 In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) sqm R 82.60
12.4.2 In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) sqm R 75.60
12.5 Neat cement punning. sqm R 28.70
12.6 6 mm cement plaster in single layer finished with a
floating coat of neat cement, curing and a thick coat of
lime wash on top when dry on wall bearings for RCC
slabs and beams complete.
12.6.1 In cement mortar 1 : 3 ( 1 cement : 3 fine sand ) sqm R 124.80
SUB HEAD : 12.0FINISHING WORK
\\vboxsrv\conversion_tmp\scratch_3\205121795.xls.ms_office/Schedule SH:12-Page:4
-
8/13/2019 12. Building Works_ Finishing
2/8
SH:12/FINISHING WORK
Code No. Description Unit Rate
12.7 Rough cast plaster upto 10 m height above ground level
with a mixture of sand and gravel or crushed stone
graded from 6 mm to 10 mm nominal size dashed over
and including the fresh plaster in two layers a) Under
layer 12 mm cement plaster 1 : 4 ( 1 cement : 4 fine sand )
b) Top layer 10 mm cement plaster 1 : 3 ( 1 cement : 3
fine sand ) mixed with 10% fine grounded hydrated limeby volume of cement and curing complete.
12.7.1 Ordinary Cement finish using ordinary cement. sqm R 538.30
12.8 Extra for providing and mixing water proofing material in
cement plaster work in proportion recommended by the
manufacturers.kg R 38.00
12.9 Extra for plastering exterior walls of height more than 10
m from GL for every additional height of 3 m or part
thereof complete.sqm R 12.40
12.10 Extra for plastering on circular work not exceeding 6 m in
radius complete.12.10.1 In one layer sqm R 10.10
12.10.2 In two layer sqm R 15.10
12.11 Extra for plastering done on moulding cornices or
architraves including neat finish to line and level.
12.11.1 In one layer sqm R 134.20
12.11.2 In two layer sqm R 221.30
12.12 Extra for plastering:
12.12.1 In Spherial ceiling sqm R 35.60
12.12.2 In Groined ceiling sqm R 38.20
12.12.3 In Flewing soffits sqm R 23.90
12.13 Providing and applying plaster of paris putty of 2 mm
thickness over plastered surface to prepare the surface
even and smooth complete.sqm R 140.60
SUPERIOR PLASTER
12.14 Providing 18 mm plastering upto 10 m height from
ground level with terazzo finished, rubbed and polished
complete, underlayer 12 mm cement plaster 1 : 3 ( 1
cement : 3 fine sand ) and top layer 6 mm thick marble
chips of 3 mm and downsize laid in cement marble
powder mix 3:1 ( 3 cement : 1 marble powder ) by weight
in proportion of 4:7 ( 4 cement marble powder mix : 7
marble chips ) by volume complete.
sqm R 419.10
\\vboxsrv\conversion_tmp\scratch_3\205121795.xls.ms_office/Schedule SH:12-Page:5
-
8/13/2019 12. Building Works_ Finishing
3/8
SH:12/FINISHING WORK
Code No. Description Unit Rate
MORTAR BANDS
12.15 Providing plain cement mortar bands 12 mm thick in
cement mortar 1:4 ( 1 cement : 4 fine sand ) in single
layer complete.
12.15.1 Flush Bandcm. per m. R 1.70
12.15.2 Sunk Bandcm. per m. R 1.80
12.15.3 Raised Bandcm. per m. R 2.00
12.15.4 Moulded Bandcm. per m. R 3.30
12.16 Providing plain cement mortar bands 18 mm thick in
cement mortar 1:4 ( 1 cement : 4 fine sand ) in single
layer complete.
12.16.1 Flush Bandcm. per m. R 2.10
12.16.2 Sunk Bandcm. per m. R 2.30
12.16.3 Raised Bandcm. per m. R 2.60
12.16.4 Moulded Bandcm. per m. R 4.50
12.17 Providing 18 mm thick moulded cement mortar bands in
two layers, under layer 12 mm thick with cement mortar
1:5 ( 1 cement : 5 fine sand ) and top layer 6 mm thick
with cement mortar 1:4 ( 1 cement : 4 fine sand )
complete.
cm. per m. R 4.40
POINTING
12.18 Pointing on brick work or brick flooring with cement
mortar 1:3 ( 1 cement : 3 fine sand ) complete.
12.18.1 Flush/ruled/Stuck or weathered Pointing sqm R 50.90
12.18.2 Raised and cut Pointing sqm R 84.80
12.19 Extra for pointing in brick work on exterior walls at
height more than 10 m from ground level for every
additional height of 3 m or part thereof complete.sqm R 5.00
INTERIOR AND EXTERIOR FINISHING
\\vboxsrv\conversion_tmp\scratch_3\205121795.xls.ms_office/Schedule SH:12-Page:6
-
8/13/2019 12. Building Works_ Finishing
4/8
SH:12/FINISHING WORK
Code No. Description Unit Rate
12.20 White washing with lime to give an even shade on new
work ( three or more coats ) complete. sqm R 13.50
12.21 White washing with whiting to give an even shade on new
work (three or more coats ) complete. sqm R 15.30
12.22 Colour washing such as green, blue or buff with whiting
to give an even shade on new work (two or more coats )
complete.12.22.1 With a base coat of white washing with lime sqm R 16.50
12.22.2 With a base coat of whiting sqm R 16.70
12.23 Distempering with dry distemper of approved brand and
manufacture and of required shade on new work ( two or
more coats ), over and including a priming coat of whiting
to give an even shade complete.
sqm R 33.30
12.24 Distempering with oil bound washable distemper of
approved brand and manufacture and of required shade
on new work ( two or more coats ), over and including a
priming coat of cement primer to give an even shade
com lete.
sqm R 52.60
12.25 Distempering with 1st quality acrylic washable
distemper of approved brand and manufacture and of
required shade on new work ( two or more coats ) to give
an even shade over and including a priming coat of
cement primer complete.
sqm R 38.20
12.26 Applying one coat of cement primer of approved brand
and manufacturer on wall surface complete. sqm R 24.10
12.27 Finishing walls with water proofing cement paint of
required shade of approved brand and manufacture on
new work ( two or more coats applied @ 3.84 kg/10 sqm)
complete.
sqm R 39.20
12.28 Finishing walls with textured exterior paint of required
shade of approved brand and manufacture on new work (two or more coats applied @ 3.28 kg/10 sqm) over and
including base coat water proofing cement paint applied
@ 2.20 kg/10 sqm complete.
sqm R 130.60
\\vboxsrv\conversion_tmp\scratch_3\205121795.xls.ms_office/Schedule SH:12-Page:7
-
8/13/2019 12. Building Works_ Finishing
5/8
SH:12/FINISHING WORK
Code No. Description Unit Rate
12.29 Finishing walls with acrylic smooth exterior paint of
required shade of approved brand and manufacture on
new work ( two or more coats applied @ 1.67 kg/10 sqm )
over and including base coat water proofing cement paint
applied @ 2.20 kg/10 sqm complete.
sqm R 65.20
12.30 Finishing walls with premium acrylic smooth exterior
paint of required shade of approved brand and
manufacture on new work ( two or more coats applied @
1.43 kg/10 sqm ) over and including base coat water
proofing cement paint applied @ 2.20 kg/10 sqm
complete.
sqm R 77.20
12.31 Applying priming coat:
12.31.1 With ready mixed pink primer of approved brand and
manufacture on wood work ( hard & soft wood ). sqm R 19.90
12.31.2 With ready mixed aluminium primer of approved brand and
manufacture on resonous wood and plywood. sqm R 18.20
12.31.3 With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on steel, galvanised iron
/ steel work.
sqm R 14.80
12.31.4 With ready mixed red oxide zinc chromate primer of
approved brand and manufacture on steel , galvanised iron
/ steel work (2nd coat ).
sqm R 8.50
12.32 Painting one thin coat with white lead of approved brand
and manufacture on wet or patchy portion of plastered
surfaces.
sqm R 27.70
12.33 Finishing with epoxy paint ( two or more coats ) of
approved brand and manufacture at all locations
prepared and applied as per manufacturer's specification
on new work including appropriate priming coat,
preparation of surface etc. complete.
12.33.1 On steel work sqm R 93.80
12.33.2 On concrete work sqm R 92.80
12.34 Painting on G.S. sheet with synthetic enamel paint ( two
or more coats ) of approved brand and manufacture of
required colour to give an even shade on new work
including a coat of appropriate steel primer but excluding
a coat of mordant solution complete.
sqm R 42.60
\\vboxsrv\conversion_tmp\scratch_3\205121795.xls.ms_office/Schedule SH:12-Page:8
-
8/13/2019 12. Building Works_ Finishing
6/8
SH:12/FINISHING WORK
Code No. Description Unit Rate
12.35 Applying a coat of mordant solution on G.S. sheet on new
work complete:
12.35.1 With a solution made of 38 gms of copper acetate in litre of
soft water. sqm R 10.60
12.35.2 With a solution made of 13 gms of hydrochloric acid in a
solution of 13 gms each of copper chloride, copper nitrate,ammonium chloride dissolved in litre of soft water.
sqm R 9.60
12.36 Painting on rain water, soil, waste and vent pipes and
fittings with black anticorrosive bitumastic paint ( two or
more coats ) of approved brand and manufacture to give
an even shade on new work over and including a priming
coat of zinc chromate yellow primer complete.
12.36.1 50mm. dia. Metre R 9.70
12.36.2 75mm. dia. Metre R 13.00
12.36.3 100mm. dia. Metre R 17.00
12.36.4 150mm. dia. Metre R 25.20
12.37 Painting on rain water, soil, waste and vent pipes and
fittings with synthetic enamel paint ( two or more coats )
of required colour of approved brand and manufacture to
give an even shade on new work over and including a
priming coat of approved steel primer complete.
12.37.1 50mm. dia. Metre R 11.30
12.37.2 75mm. dia. Metre R 15.20
12.37.3 100mm. dia. Metre R 19.9012.37.4 150mm. dia. Metre R 29.30
12.38 Painting on wood work with oil type wood preservative (
two or more coats) of approved brand and manufacture
on new work complete.
sqm R 17.10
12.39 Providing and applying two coats of fire retardant paint
unthinned on cleaned wood/ply surface of required
colour of approved brand and manufacture on new work
@ 3.5 sqm per litre including preparation of base surface
as per recommendation of the manufacturer to make the
surface fire returdant.
sqm R 323.70
12.40 Coal tarring ( two or more coats ) of approved brand and
manufacture on new work @ 0.16 litre and 0.12 coal tar
per sqm in the first coat and second coat respectively
com lete.
sqm R 21.00
\\vboxsrv\conversion_tmp\scratch_3\205121795.xls.ms_office/Schedule SH:12-Page:9
-
8/13/2019 12. Building Works_ Finishing
7/8
SH:12/FINISHING WORK
Code No. Description Unit Rate
12.41 Wall painting with plastic emulsion paint ( two or more
coats ) of required colour of approved brand and
manufacture on new work to give an even shade. sqm R 51.20
12.42 Painting with synthetic enamel paint ( two or more coats )
of required colour of approved brand and manufactureon new work to give an even shade. sqm R 43.60
12.43 Painting with synthetic enamel paint ( two or more coats )
of required colour of approved brand and manufacture
on new work to give an even shade over an under coat of
suitable shade with ordinary paint of approved brand and
manufacture.
sqm R 60.80
12.44 Painting with Aluminium paint ( two or more coats ) of
approved brand and manufacture on new work to give an
even shade.
sqm R 33.90
12.45 Painting with acid proof paint ( two or more coats ) of
approved brand and manufacture of required colour on
new work to give an even shade. sqm R 40.70
12.46 Painting with black anticorrosive bitumastic paint ( two
or more coats ) of approved brand and manufacture on
new work to give an even shade.
sqm R 30.30
12.47 Floor painting with floor enamel paint ( two or more coats
) of approved brand and manufacture of required colouron new work to give an even shade.
sqm R 45.20
12.48 Varnishing with varnish of approved brand and
mamufacturer.
12.48.1 Two or more coats of glue with copal varnish over an under
coat of flatting varnish. sqm R 68.70
12.48.2 Two or more coats of glue with spar varnish over an under
coat of flatting varnish. sqm R 68.90
12.49 French spirit polishing ( two or more coats of glue sizing )on new work over a coat of wood filler. sqm R 100.90
12.50 Polishing on wood work with readymade wax polish ( two
or more coats ) of approved brand and manufacture on
new work.sqm R 44.10
\\vboxsrv\conversion_tmp\scratch_3\205121795.xls.ms_office/Schedule SH:12-Page:10
-
8/13/2019 12. Building Works_ Finishing
8/8
SH:12/FINISHING WORK
Code No. Description Unit Rate
12.51 Floor polishing on masonry / concrete floors with
readymade wax polish ( two or more coats ) of approved
brand and manufacture on new work.sqm R 19.10
12.52 Lettering with black japan paint of approved brand and
manufacture on new work.per letter
per cm
height
R 1.20
\\vboxsrv\conversion_tmp\scratch_3\205121795.xls.ms_office/Schedule SH:12-Page:11