19 CEN ISO/TS 80004-2:2017 Nanotechnologies. Vocabulary. Nano-objects Trim. IV

20 CEN/ISO TR 16401-2:2018Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite (ISO/TR 16401-2:2018) Trim. IV

21 CEN/TR 13233:2007/AC:2007 Advanced technical ceramics - Notations and symbols Trim. IV22 CEN/TR 13387-1:2018 Child care articles - General safety guidelines - Part 1: Safety philosophy and safety assessment Trim. IV23 CEN/TR 13387-5:2018 Child care articles - General safety guidelines - Part 5: Product information Trim. IV

24 CEN/TR 15310-5:2006Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan Trim. IV

25 CEN/TR 15371-2:2018Safety of toys - Interpretations - Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series Trim. IV

26 CEN/TR 15993:2018Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination Trim. IV

27

CEN/TR 16798-2:2017

Energy performance of buildings. Ventilation for buildings. Interpretation of the requirements in EN 16798-5 -1 and EN 16798-5-2. Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M 6-5, M6-8 , M7-5, M7-8) Trim. IV

28 CEN/TR 16961:2018 Declaration of uncertainties in test reports Trim. IV29 CEN/TR 17014-101:2018 Electronic public procurement - Business interoperability interfaces (BII), e-Tendering - Part 101: Overview Trim. IV30 CEN/TR 17015-101:2018 Electronic public procurement - Business interoperability interfaces (BII), e-Catalogue - Part 101: Overview Trim. IV

31 CEN/TR 17167:2018Communication system for meters - Accompanying TR to EN 13757-2,-3 and -7, Examples and supplementary information Trim. IV

32 CEN/TR 17172:2018 Validation testing program on chloride penetration and carbonation standardized test methods Trim. IV33 CEN/TR 17179:2018 Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for undergrou Trim. IV34 CEN/TR 17202:2018 Furniture - General safety guidelines - Entrapment of fingers Trim. IV35 CEN/TR 17219:2018 Plastics - Biodegradable thermoplastic mulch films for use in agriculture and horticulture - Guide for the quantification of alte Trim. IV

36 CEN/TR 17221:2018Guidance on the application of CE marking and preparation of Declaration of Performance for sanitary appliances Trim. IV

37

CEN/TR 17223:2018Guidance on the relationship between EN ISO 13485: 2016 (Medical devices - Quality management systems - Requirements for regulatory purposes) and European Medical Devices Regulation and In Vitro Diagnostic Medical Devices Regulation Trim. IV

38 CEN/TR 17231:2018 Eurocode 1: Actions on Structures - Traffic Loads on Bridges - Track-Bridge Interaction Trim. IV39 CEN/TR 17238:2018 Proposed limit values for contaminants in biomethane based on health assessment criteria Trim. IV40 CEN/TR 419030:2018 Rationalized structure for electronic signature standardization - Best practices for SMEs Trim. IV41 CEN/TR 419040:2018 Rationalized structure for electronic signature standardization - Guidelines for citizens Trim. IV42 CEN/TS 1187:2012 Test methods for external fire exposure to roofs Trim. IV

43 CEN/TS 12666-2:2012Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Guidance for the assessment of conformity Trim. IV

44 CEN/TS 12697-50:2018 Bituminous mixtures - Test methods - Part 50: Resistance to scuffing Trim. IV45 CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test Trim. IV46 CEN/TS 12697-52:2017 Bituminous mixtures. Test methods. Conditioning to address oxidative ageing Trim. IV

47CEN/TS 1329-2:2018

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity Trim. IV

48 CEN/TS 13714:2013 Characterization of sludges. Sludge management in relation to use or disposal Trim. IV

49CEN/TS 1401-2:2012

Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U). Part 2: Guidance for assessment of conformity Trim. IV

50CEN/TS 1451-2:2012

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Part 2: Guidance for the assessment of conformity Trim. IV

51CEN/TS 1452-7:2014

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Part 7: Guidance for the assessment of conformity Trim. IV

52CEN/TS 1455-2:2012

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrilebutadiene-styrene (ABS). Part 2: Guidance for the assessment of conformity Trim. IV

53

CEN/TS 14632:2012Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity Trim. IV

54CEN/TS 14807:2013

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the structural analysis of buried GRP-UP pipelines Trim. IV

55 CEN/TS 14940-1:2009 Copper and copper alloys. Determination of chromium content. Part 1: Titrimetric method Trim. IV56 CEN/TS 15022-2:2009 Copper and copper alloys. Determination of tin content. Part 2: Spectrophotometric method Trim. IV

57CEN/TS 15119-1:2018

Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground) - Laboratory method Trim. IV

58CEN/TS 1519-2:2012

Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylen (PE). Part 2: Guidance for the assessment of conformity Trim. IV

59 CEN/TS 15223:2017Plastics piping systems - Validated design parameters of buried thermoplastics piping systems Trim. IV

60 CEN/TS 1555-7:2013Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Part 7: Guidance for the assessment of conformity Trim. IV

61CEN/TS 1565-2:2012

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrenecopolymer blends (SAN+PVC). Part 2: Guidance for the assessment of conformity Trim. IV

62CEN/TS 1566-2:2012

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Part 2: Guidance for assessment of conformity Trim. IV

63 CEN/TS 16244:2018Ventilation in hospitals - Coherent hierarchic structure and common terms and definitions for a standard related to ventilation in hospitals Trim. IV

64CEN/TS 16346:2012

Bituminous binders. Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate Trim. IV

65 CEN/TS 16459:2013External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187 Trim. IV

66 CEN/TS 16637-1:2018 Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching Trim. IV

67 CEN/TS 16637-2:2014Construction products. Assessment of release of dangerous substances. Horizontal dynamic surface leaching test Trim. IV

68 CEN/TS 16786:2018Road restraint systems - Truck Mounted Attenuators - Performance classes, impact test acceptance criteria and test performance Trim. IV

69 CEN/TS 16850:2015 Societal and Citizen Security. Guidance for managing security in healthcare facilities Trim. IV70 CEN/TS 16931-2:2017 Electronic invoicing - Part 2: List of syntaxes that comply with EN 16931-1 Trim. IV

71 CEN/TS 16931-3-1:2017Electronic invoicing. Methodology for syntax bindings of the core elements of an electronic invoice Trim. IV

72 CEN/TS 16931-3-2:2017Electronic invoicing - Part 3-2: Syntax binding for ISO/IEC 19845 (UBL 2.1) invoice and credit note Trim. IV

73 CEN/TS 16931-3-3:2017 Electronic invoicing - Part 3-3: Syntax binding for UN/CEFACT XML Industry Invoice D16B Trim. IV74 CEN/TS 16931-3-4:2017 Electronic invoicing - Part 3-4: Syntax binding for UN/EDIFACT INVOIC D16B Trim. IV75 CEN/TS 17051:2017 Full body photography Trim. IV

76 CEN/TS 17060:2017Fertilizers - Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8- hydroxyquinoline Trim. IV

77CEN/TS 17061:2017

Foodstuffs - Guidelines for the calibration and quantitative determination of pesticide residues and organic contaminants using chromatographic methods Trim. IV

78 CEN/TS 17062:2017Foods of plant origin - Multimethod for the determination of pesticide residues in vegetable oils by LC-MS/MS Trim. IV

79 CEN/TS 17073:2017 Postal services - Interfaces for cross border parcels Trim. IV

80 CEN/TS 17083:2017Foodstuffs - Determination of acrylamide in food and coffee by gas chromatography-mass spectrometry (GC-MS) Trim. IV

81 CEN/TS 17100:2017Non-destructive testing - Penetrant testing - Reference photographs and sizing of indications Trim. IV

82 CEN/TS 17118:2017 Intelligent transport systems - Public transport - Open API for distributed journey planning Trim. IV

83 CEN/TS 17148:2018Intelligent Transport Systems - eSafety - ProForma eCall Agreement between TPSP and PARES Trim. IV

84 CEN/TS 17153:2018 Ventilation for buildings - Correction of air flow rate according to ambient conditions Trim. IV

85

CEN/TS 17158:2018Composites made from cellulose based materials and thermoplastics (usually called wood polymer composites (WPC) or natural fibre composites (NFC)) - Determination of particle size of lignocellosic material Trim. IV

86 CEN/TS 17159:2018Societal and citizen security - Guidance for the security of hazardous materials (CBRNE) in healthcare facilities Trim. IV

87 CEN/TS 17188:2018Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags Trim. IV

88 CEN/TS 17189:2018Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry Trim. IV

89 CEN/TS 17195:2018Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in eluates Trim. IV

90 CEN/TS 17196:2018Construction products: Assessment of release of dangerous substances - Digestion by aqua regia for subsequent analysis of inorganic substances Trim. IV

91CEN/TS 17197:2018

Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Optical Emission Spectrometry (ICP-OES) Trim. IV

92CEN/TS 17200:2018

Construction products: Assessment of release of dangerous substances - Analysis of inorganic substances in digests and eluates - Analysis by Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) Trim. IV

93CEN/TS 17201:2018

Construction products: Assessment of release of dangerous substances - Content of inorganic substances - Methods for analysis of aqua regia digests Trim. IV

94CEN/TS 1852-2:2015

Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 2: Guidance for the assessment of conformity Trim. IV

95 CLC/TR 50442:2018Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields Trim. IV

96 CLC/TR 50682:2018Consideration on the use of OTDRs to measure return loss of single-mode optical fibre connections Trim. IV

97 CLC/TS 50083-2-3:2018Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference Mitigation Filters Trim. IV

98 CLC/TS 50136-7:2017 Alarm systems - Alarm transmission systems and equipment - Part 7: Application guidelines Trim. IV

99CLC/TS 50136-9:2017

Alarm systems - Alarm transmission systems and equipment - Part 9: Requirements for common protocol for alarm transmission using the Internet Protocol (IP) Trim. IV

100CLC/TS 50625-3-3:2017

Collection, logistics & treatment requirements for WEEE - Part 3-3: Specification for de-pollution - WEEE containing CRTs and flat panel displays Trim. IV

101 CLC/TS 50625-3-4:2017Collection, logistics & treatment requirements for WEEE. Specification for de-pollution. Temperature exchange equipment Trim. IV

102 CLC/TS 50625-3-5:2017Collection, logistics & Treatment requirements for WEEE - Part 3-5: Technical specification for de-pollution - Photovoltaic panels Trim. IV

103 CLC/TS 50625-4:2017Collection, logistics & treatment requirements for WEEE - Part 4: Specification for the collection and logistics associated with WEEE Trim. IV

104CLC/TS 50625-5:2017

Collection, logistics & Treatment requirements for WEEE - Part 5: Specification for the final treatment of WEEE fractions - Copper and precious metals Trim. IV

105 CLC/TS 50654-1:2018HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 1: Guidelines Trim. IV

106 CLC/TS 50654-2:2018HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2: Parameter Lists Trim. IV

107 CLC/TS 50661-1:2017 Alarm systems - External perimeter security systems - Part 1: System requirements Trim. IV

108 CLC/TS 61400-14:2017Wind turbines - Part 14: Declaration of apparent sound power level and tonality values (IEC/TS 61400-14:2005) Trim. IV

109 CLC/TS 61400-26-1:2017Wind turbines - Part 26-1: Time-based availability for wind turbine generating systems (IEC/TS 61400-26-1:2011) Trim. IV

110 CLC/TS 61400-26-2:2017Wind turbines - Part 26-2: Production-based availability for wind turbines (IEC/TS 61400-26-2:2014) Trim. IV

111 CLC/TS 61400-26-3:2017Wind energy generation systems - Part 26-3: Availability for wind power stations (IEC/TS 61400-26-3:2016) Trim. IV

112 CWA 16267:2011 Guidelines for Sustainable Development of Historic and Cultural Cities. Qualicities® Trim. IV113 CWA 16387:2011 Clean Harbours. Guidelines Trim. IV

114 CWA 16390:2018Interface control document for provision of EGNOS/EDAS/multi-GNSS based services for tracking and tracing the transport of goods Trim. IV

115CWA 16633:2013

Ageing behaviour of Structural Components with regard to Integrated Lifetime Assessment and subsequent Asset Management of Constructed Facilities Trim. IV

116 CWA 16975:2015 Eco-efficient Substations for District Heating Trim. IV117 CWA 16975:2015/AC:2016 Eco-efficient Substations for District Heating Trim. IV118 CWA 17089:2016 Indicators for the sustainability assessment of roads Trim. IV119 CWA 17145-1:2017 Ethics assessment for research and innovation - Part 1: Ethics committee Trim. IV

120 CWA 17145-2:2017Ethics assessment for research and innovation - Part 2: Ethical impact assessment framework Trim. IV

121 CWA 17147:2017 Guidelines for the evaluation of installed security systems, based on the STEFi dimensions Trim. IV

122 CWA 17157:2017 Engineering materials. Electronic data interchang. Formats for fatigue test data Trim. IV

123 CWA 17185:2017Methodology to measure and improve the resource efficiency of resource intensive processes Trim. IV

124 CWA 17239:2018 Big Data in Aquaculture Trim. IV

125 CWA 17253-1:2018Joint implants - Part 1: Novel methods for isolating wear particles from joint replacements and related devices Trim. IV

126 CWA 17253-2:2018Joint implants - Part 2: Tiered toolkit approach to evaluate the biological impact of wear particles from joint replacements and related devices Trim. IV

127 CWA 17260:2018 Guidelines on evaluation systems and schemes for physical security products Trim. IV128 CWA 17284:2018 Materials modelling - Terminology, classification and metadata Trim. IV129 CWA 17316:2018 Smart CE marking for construction products Trim. IV

130 EN 1011-8:2018 Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons Trim. IV131 EN 10277:2018 Bright steel products - Technical delivery conditions Trim. IV

132 EN 1090-2:2018Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures Trim. IV

133EN 1090-4:2018

Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications Trim. IV

134 EN 1092-1:2018Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges Trim. IV

135 EN 1116:2018Furniture - Kitchen furniture - Coordinating sizes for kitchen furniture and kitchen appliances Trim. IV

136 EN 1177:2018Impact attenuating playground surfacing - Methods of test for determination of impact attenuation Trim. IV

137 EN 1196:1998Domestic and non-domestic gas-fired air heaters. Supplementary requirements for condensing air heaters. Trim. IV

138 EN 12013:2018 Plastics and rubber machines - Internal mixers - Safety requirements Trim. IV

139 EN 12067-2:2004 Gas/air ratio controls for gas burners and gas burning appliances. Electronic types Trim. IV140 EN 122002:1993 Blank Detail Specification: Radio frequency coaxial connectors Trim. IV

141 EN 12216:2018 Shutters, external blinds, internal blinds - Terminology, glossary and definitions Trim. IV142 EN 122160:1993 Sectional Specification: Radio frequency coaxial connectors - Series SSMA Trim. IV

143 EN 12244-1:1998 Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW. Safety Trim. IV

144 EN 12244-2:1998Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW. Rational use of energy Trim. IV

145 EN 12261:2018 Gas meters - Turbine gas meters Trim. IV

146 EN 12274-1:2018 Slurry surfacing - Test methods - Part 1: Sampling of slurry surfacing mixture Trim. IV

147 EN 12274-2:2018Slurry surfacing - Test methods - Part 2: Determination of residual binder content including preparation of samples Trim. IV

148 EN 12274-3:2018 Slurry surfacing - Test methods - Part 3: Consistency Trim. IV

149 EN 12274-4:2018 Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix Trim. IV

150 EN 12274-5:2018Slurry surfacing - Test method - Part 5: Determination of the minimum binder content and wearing resistance Trim. IV

151 EN 12274-6:2018 Slurry surfacing - Test methods - Part 6: Rate of application Trim. IV

152

EN 12285-1:2018Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings Trim. IV

153 EN 12390-14:2018Testing hardened concrete - Part 14: Semi-adiabatic method for the determination of heat released by concrete during its hardening process Trim. IV

154 EN 12467:2012+A2:2018 Fibre-cement flat sheets - Product specification and test methods Trim. IV155 EN 12480:2018 Gas meters - Rotary displacement gas meters Trim. IV

156 EN 12493:2013+A2:2018LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture Trim. IV

157 EN 12519:2018 Windows and pedestrian doors - Terminology Trim. IV

158 EN 12665:2018 Light and lighting - Basic terms and criteria for specifying lighting requirements Trim. IV

159 EN 12691:2018Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact Trim. IV

160 EN 12697-12:2018Bituminous mixtures - Test methods - Part 12: Determination of the water sensitivity of bituminous specimens Trim. IV

161 EN 12697-24:2018 Bituminous mixtures - Test methods - Part 24: Resistance to fatigue Trim. IV162 EN 12697-26:2018 Bituminous mixtures - Test methods - Part 26: Stiffness Trim. IV

163EN 1279-3:2018

Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances Trim. IV

164 EN 12814-3:2014 Testing of welded joints in thermoplastics semi-finished products. Part 3: Tensile creep test Trim. IV

165 EN 12814-4:2018 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test Trim. IV

166 EN 12814-4:2018/AC:2018 Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test Trim. IV

167 EN 12830:2018Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability Trim. IV

168 EN 12861:2018 Copper and copper alloys - Scrap Trim. IV

169 EN 12953-4:2018 Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler Trim. IV

170 EN 12977-1:2018Thermal solar systems and components - Custom built systems - Part 1: General requirements for solar water heaters and combisystems Trim. IV

171 EN 12977-2:2018Thermal solar systems and components - Custom built systems - Part 2: Test methods for solar water heaters and combisystems Trim. IV

172 EN 12977-3:2018Thermal solar systems and components - Custom built systems - Part 3: Performance test methods for solar water heater stores Trim. IV

173 EN 12977-4:2018Thermal solar systems and components - Custom built systems - Part 4: Performance test methods for solar combistores Trim. IV

174 EN 12977-5:2018Thermal solar systems and components - Custom built systems - Part 5: Performance test methods for control equipment Trim. IV

175 EN 12999:2011+A2:2018 Cranes - Loader cranes Trim. IV

176 EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure Trim. IV

177 EN 13001-3-6:2018Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders Trim. IV

178EN 13016-1:2018

Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) Trim. IV

179EN 13016-3:2018

Liquid petroleum products - Vapour pressure - Part 3: Determination of vapour pressure and calculated dry vapour pressure equivalent (DVPE) (Triple Expansion Method) Trim. IV

180 EN 1305:2018 Inland navigation vessels - Connections for the discharge of oily mixture Trim. IV181 EN 1306:2018 Inland navigation vessels - Connections for the discharge of waste water Trim. IV182 EN 1307:2014+A2:2018 Textile floor coverings - Classification Trim. IV

183 EN 13077:2018Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B Trim. IV

184 EN 13083:2008+A1:2013Tanks for transport of dangerous goods. Service equipment for tanks. Adaptor for bottom loading and unloading Trim. IV

185 EN 1309-3:2018Round and sawn timber - Methods of measurements - Part 3: Features and biological degradations Trim. IV

186 EN 13096:2003/AC:2006Transportable gas cylinders. Conditions for filling gases into receptacles. Single component gases. Trim. IV

187EN 13126-6:2018

Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction stay) Trim. IV

188 EN 131-3:2018 Ladders - Part 3: Marking and user instructions Trim. IV189 EN 13135:2013+A1:2018 Cranes - Safety - Design - Requirements for equipment Trim. IV

190EN 13158:2018

Protective clothing - Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers - Requirements and test methods Trim. IV

191 EN 13184:2001/A1:2003 Non-destructive testing. Leak testing. Pressure change method Trim. IV192 EN 13200-3:2018 Spectator facilities - Part 3: Separating elements - Requirements Trim. IV

193 EN 13203-6:2018Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps Trim. IV

194 EN 13207:2018 Plastics - Thermoplastic silage films and tubes for use in agriculture Trim. IV195 EN 13212:2011 Road marking materials. Requirements for factory production control Trim. IV

196 EN 13231-5:2018Railway applications - Track - Acceptance of works - Part 5: Procedures for rail reprofiling in plain line, switches, crossings and expansion devices Trim. IV

197 EN 13285:2018 Unbound mixtures - Specifications Trim. IV

198

EN 1329-1:2014+A1:2018Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the systems Trim. IV

199 EN 13302:2018Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus Trim. IV

200 EN 13361:2018Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams Trim. IV

201 EN 13362:2018 Geosynthetic Barriers - Characteristics required for use in the construction of canals Trim. IV202 EN 13369:2018 Common rules for precast concrete products Trim. IV203 EN 13445-1:2014/A2:2018 Unfired pressure vessels - Part 1: General Trim. IV204 EN 13445-2:2014/A2:2018 Unfired pressure vessels - Part 2: Materials Trim. IV205 EN 13445-3:2014/A4:2018 Unfired pressure vessels - Part 3: Design Trim. IV

206EN 13467:2018

Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation Trim. IV

207

EN 13476-1:2018Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristics Trim. IV

208

EN 13476-2:2018

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A Trim. IV

209

EN 13476-3:2018

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B Trim. IV

210 EN 13491:2018Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures Trim. IV

211EN 13492:2018

Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment Trim. IV

212 EN 13493:2018Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites Trim. IV

213EN 13497:2018

Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) Trim. IV

214 EN 13507:2018Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying Trim. IV

215 EN 13589:2018Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method Trim. IV

216 EN 13615:2001/AC:2002Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry Trim. IV

217 EN 1364-2:2018 Fire resistance for tests for non-loadbearing elements - Part 2: Ceilings Trim. IV

218 EN 13655:2018Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture Trim. IV

219 EN 1366-11:2018Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components Trim. IV

220 EN 13684:2018 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety Trim. IV

221

EN 13704:2018Chemical disinfectants - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1) Trim. IV

222EN 137100:1995

Sectional Specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval Trim. IV

223 EN 13757-2:2018 Communication systems for meters - Part 2: Wired M-Bus communication Trim. IV224 EN 13757-3:2018 Communication systems for meters - Part 3: Application protocols Trim. IV

225 EN 13757-7:2018 Communication systems for meters - Part 7: Transport and security services Trim. IV

226 EN 13765:2018Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification Trim. IV

227EN 13880-10:2018

Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression Trim. IV

228 EN 13880-13:2018Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test) Trim. IV

229 EN 1395-5:2018Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers Trim. IV

230 EN 13976-1:2018 Rescue systems - Transportation of incubators - Part 1: Interface requirements Trim. IV

231 EN 13976-2:2018 Rescue systems - Transportation of incubators - Part 2: System requirements Trim. IV

232 EN 140401-804:2011/AC:2012Detail Specification: Fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1; 0,25 Trim. IV

233 EN 14041:2018 Resilient, textile, laminate and modular multilayer floor coverings - Essential characteristics Trim. IV

234 EN 14116:2012+A2:2018Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels Trim. IV

235 EN 1431:2018Bitumen and bituminous binders - Determination of residual binder and oil distillate from bitumen emulsions by distillation Trim. IV

236EN 14325:2018

Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages Trim. IV

237 EN 1436:2018 Road marking materials - Road marking performance for road users and test methods Trim. IV

238 EN 14399-10:2018High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload Trim. IV

239 EN 14399-9:2018High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies Trim. IV

240EN 1440:2016+A1:2018

LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection Trim. IV

241 EN 144-1:2018 Respiratory protective devices - Gas cylinder valves - Part 1: Inlet connections Trim. IV

242 EN 144-2:2018 Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections Trim. IV243 EN 14460:2018 Explosion resistant equipment Trim. IV

244EN 1451-1:2017/AC:2018

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system Trim. IV

245EN 14511-1:2018

Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions Trim. IV

246EN 14511-2:2018

Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 2: Test conditions Trim. IV

247EN 14511-3:2018

Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods Trim. IV

248EN 14511-4:2018

Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Requirements Trim. IV

249EN 14593-1:2018

Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking Trim. IV

250 EN 14594:2018Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking Trim. IV

251 EN 14903:2018Surfaces for sports areas - Multi-sports floor systems for indoor use - Test method for determination of rotational friction Trim. IV

252 EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales Trim. IV

253 EN 15024-2:2018Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometric method (FAAS) Trim. IV

254 EN 15129:2018 Anti-seismic devices Trim. IV

255 EN 15254-5:2018Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction Trim. IV

256 EN 15254-7:2018Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction Trim. IV

257

EN 15269-11:2018Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains Trim. IV

258 EN 15382:2018 Geosynthetic barriers - Characteristics required for use in transportation infrastructure Trim. IV

259 EN 15654-1:2018Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service Trim. IV

260

EN 15662:2018Foods of plant origin - Multimethod for the determination of pesticide residues using GC- and LC-based analysis following acetonitrile extraction/partitioning and clean-up by dispersive SPE - Modular QuEChERS-method Trim. IV

261EN 1568-1:2018

Fire extinguishing media - Foam concentrates - Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids Trim. IV

262EN 1568-2:2018

Fire extinguishing media - Foam concentrates - Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids Trim. IV

263EN 1568-3:2018

Fire extinguishing media - Foam concentrates - Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids Trim. IV

264EN 1568-4:2018

Fire extinguishing media - Foam concentrates - Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids Trim. IV

265EN 15773:2018

Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines Trim. IV

266 EN 15860:2018Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods Trim. IV

267 EN 15895:2011+A1:2018 Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools Trim. IV

268 EN 15940:2016+A1:2018Automotive fuels - Paraffinic diesel fuel from synthesis or hydrotreatment - Requirements and test methods Trim. IV

269EN 16181:2018

Soil, treated biowaste and sludge - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) Trim. IV

270 EN 16205:2013+A1:2018 Laboratory measurement of walking noise on floors Trim. IV271 EN 16232:2013+A1:2018 Child use and care articles - Infant swings Trim. IV

272 EN 16236:2018Assessment and Verification of the Constancy of Performance (AVCP) of aggregates - Type testing and Factory Production Control Trim. IV

273EN 1634-1:2014+A1:2018

Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows Trim. IV

274 EN 1645-1:2018Leisure accommodation vehicles - Caravans - Part 1: Habitation requirements relating to health and safety Trim. IV

275 EN 1646-1:2018Leisure accommodation vehicles - Motor caravans - Part 1: Habitation requirements relating to health and safety Trim. IV

276 EN 1648-1:2018Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 1: Caravans Trim. IV

277 EN 1648-2:2018Leisure accommodation vehicles - 12 V direct current extra low voltage electrical installations - Part 2: Motor caravans Trim. IV

278 EN 1651:2018 Paragliding equipment - Harnesses - Safety requirements and strength tests Trim. IV

279 EN 16510-1:2018 Residential solid fuel burning appliances - Part 1: General requirements and test methods Trim. IV

280 EN 16579:2018Playing field equipment - Portable and permanent socketed goals - Functional, safety requirements and test methods Trim. IV

281 EN 16602-30:2018 Space product assurance - Dependability Trim. IV282 EN 16602-40:2018 Space product assurance - Safety Trim. IV283 EN 16603-10:2018 Space engineering - System engineering general requirements Trim. IV

284 EN 16657:2016+A1:2018Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks Trim. IV

285 EN 16668:2016+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories Trim. IV286 EN 16719:2018 Transport platforms Trim. IV

287

EN 16727-1:2018Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 1: Mechanical performance under static loadings - Calculation and test method Trim. IV

288

EN 16727-2-1:2018Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-1: Mechanical performance under dynamic loadings due to passing trains - Resistance to fatigue Trim. IV

289EN 16728:2016+A1:2018

LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection Trim. IV

290EN 16729-3:2018

Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 3: Requirements for identifying internal and surface rail defects Trim. IV

291 EN 16785-2:2018Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method Trim. IV

292 EN 16837:2018 Surfaces for sports areas - Determination of linear shoe/surface friction Trim. IV

293 EN 16842-1:2018Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements Trim. IV

294EN 16842-2:2018

Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity Trim. IV

295 EN 16844:2017+A1:2018 Aesthetic medicine services - Non-surgical medical treatments Trim. IV296 EN 16869:2017/AC:2018 Design/construction of Via Ferratas Trim. IV

297EN 16893:2018

Conservation of Cultural Heritage - Specifications for location, construction and modification of buildings or rooms intended for the storage or use of heritage collections Trim. IV

298 EN 16910-1:2018Railway applications - Rolling stock - Requirements for non-destructive testing on running gear in railway maintenance - Part 1: Wheelsets Trim. IV

299 EN 16932-1:2018Drain and sewer systems outside buildings - Pumping systems - Part 1: General requirements Trim. IV

300 EN 16932-2:2018Drain and sewer systems outside buildings - Pumping systems - Part 2: Positive pressure systems Trim. IV

301 EN 16932-3:2018 Drain and sewer systems outside buildings - Pumping systems - Part 3: Vacuum systems Trim. IV

302 EN 16933-2:2017 Drain and sewer systems outside buildings - Design - Part 2: Hydraulic design Trim. IV

303 EN 16941-1:2018 On-site non-potable water systems - Part 1: Systems for the use of rainwater Trim. IV

304EN 16951-1:2018

Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Procedures for assessing long term performance - Part 1: Acoustic characteristics Trim. IV

305EN 16951-2:2018

Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Procedures for assessing long term performance - Part 2: Non-acoustic characteristics Trim. IV

306 EN 16952:2018Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety Trim. IV

307 EN 16954:2018Agglomerated stone - Slabs and cut-to-size products for flooring and stairs (internal and external) Trim. IV

308 EN 16962:2018Fertilizers - Extraction of water soluble micro-nutrients in fertilizers and removal of organic compounds from fertilizer extracts Trim. IV

309 EN 16963:2018Fertilizers - Determination of boron, cobalt, copper, iron, manganese, molybdenum and zinc using ICP-AES Trim. IV

310 EN 16964:2018 Fertilizers - Extraction of total micro-nutrients in fertilizers using aqua regia Trim. IV

311 EN 16965:2018Fertilizers - Determination of cobalt, copper, iron, manganese and zinc using flame atomic absorption spectrometry (FAAS) Trim. IV

312 EN 16989:2018Railway applications - Fire protection on railway vehicles - Fire behaviour test for a complete seat Trim. IV

313 EN 16991:2018 Risk-based inspection framework Trim. IV

314

EN 16993:2018Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids Trim. IV

315EN 16994:2018

Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) Trim. IV

316 EN 17030:2018 Space - Earth observation - Image processing levels Trim. IV

317 EN 17032:2018Blast chillers and freezers cabinets for professional use - Classification, requirements and test conditions Trim. IV

318 EN 17033:2018Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods Trim. IV

319EN 17034:2018

Chemicals used for treatment of water intended for human consumption - Aluminium chloride anhydrous, aluminium chloride basic, dialuminium chloride pentahydroxide and aluminium chloride hydroxide sulfate Trim. IV

320EN 17036:2018

Conservation of Cultural Heritage - Artificial ageing by simulated solar radiation of the surface of untreated or treated porous inorganic materials Trim. IV

321 EN 17041:2018Fertilizers - Determination of boron in concentrations ≤ 10 % using spectrometry with azomethine-H Trim. IV

322 EN 17042:2018 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration Trim. IV

323 EN 17043:2018Fertilizers - Determination of molybdenum in concentrations ≤ 10 % using spectrometry of a complex with ammonium thiocyanate Trim. IV

324EN 17049:2018

Animal feeding stuffs: Methods of sampling and analysis - Identification of tylosin, spiramycin, virginiamycin, carbadox and olaquindox at sub-additive levels in compound feed - Confirmatory analysis by LC-MS Trim. IV

325EN 17053:2018

Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method) Trim. IV

326EN 17057:2018

Automotive fuels and fat and oil derivates - Determination of saturated monoglycerides content in Fatty Acid Methyl Esters (FAME) - Method by GC-FID Trim. IV

327 EN 17059:2018 Plating and anodizing lines - Safety requirements Trim. IV328 EN 17065:2018 Railway applications - Braking - Passenger coach test procedure Trim. IV329 EN 17077:2018 Determination of burning behaviour of dust layers Trim. IV

330 EN 17098-1:2018Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films Trim. IV

331EN 17098-2:2018

Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique Trim. IV

332EN 17101:2018

Thermal insulation products for buildings - Methods of identification and test methods for one-component PU adhesive foam for External Thermal Insulation Composite Systems (ETICS) Trim. IV

333EN 175101-809:2004/corrigendum Jun

Detail specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality Trim. IV

334 EN 1759-3:2003/AC:2004Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges Trim. IV

335EN 1793-2:2018

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions Trim. IV

336EN 1793-5:2016/AC:2018

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions Trim. IV

337EN 1793-6:2018

Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions Trim. IV

338 EN 1794-1:2018Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements Trim. IV

339EN 1852-1:2018

Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system Trim. IV

340 EN 1885:2018 Feather and down - Terms and definitions Trim. IV

341 EN 190103:1994Family Specification: Digital integrated TTL low power Schottky circuits - Series 54LS, 64LS, 74LS, 84LS Trim. IV

342 EN 190106:1994Family Specification: TTL advanced low power Schottky digital integrated circuits - Series 54ALS, 74ALS Trim. IV

343 EN 190107:1994 Family Specification: TTL FAST digital integrated circuits - Series 54F, 74F Trim. IV344 EN 190110:1994 Blank Detail Specification: Digital microprocessor integrated circuits Trim. IV

345 EN 1992-4:2018 Eurocode 2 - Design of concrete structures - Part 4: Design of fastenings for use in concrete Trim. IV

346 EN 2234:2018 Aerospace series - Cable, electrical, fire resistant - Technical specification Trim. IV

347 EN 2243-4:2005Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test Trim. IV

348EN 2266-005:2005

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 005: UV laser printable - Product standard Trim. IV

349EN 2267-007:2005

Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard Trim. IV

350 EN 2327:2006Aerospace series - Washers, lock, with radial serrations in alloy steel, cadmium plated for flight control rods - Dimensions Trim. IV

351EN 2346-003:2006

Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 003: DL family, single core - Product standard Trim. IV

352 EN 2349-201:2006Aerospace series - Requirements and test procedures for relays and contactors - Part 201: Visual inspection Trim. IV

353 EN 2349-304:2006Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time Trim. IV

354 EN 2349-309:2006Aerospace series - Requirements and test procedures for relays and contactors - Part 309: Exported spikes Trim. IV

355 EN 2349-405:2006Aerospace series - Requirements and test procedures for relays and contactors - Part 405: Fluid resistance Trim. IV

356 EN 2349-409:2007Aerospace series - Requirements and test procedures for relays and contactors - Part 409: Ozone resistance Trim. IV

357 EN 2349-410:2007Aerospace series - Requirements and test procedures for relays and contactors - Part 410: Mould Trim. IV

358 EN 2349-411:2007Aerospace series - Requirements and test procedures for relays and contactors - Part 411: Temperature change Trim. IV

359 EN 2349-412:2007Aerospace series - Requirements and test procedures for relays and contactors - Part 412: Seal Trim. IV

360 EN 2349-413:2007Aerospace series - Requirements and test procedures for relays and contactors - Part 413: Vibration, sinusoidal and random Trim. IV

361 EN 2349-414:2007Aerospace series - Requirements and test procedures for relays and contactors - Part 414: Mechanical shock Trim. IV

362 EN 2349-415:2007Aerospace series - Requirements and test procedures for relays and contactors - Part 415: Acceleration Trim. IV

363 EN 2349-601:2007Aerospace series - Requirements and test procedures for relays and contactors - Part 601: Compass safety distance Trim. IV

364EN 2434-005:2006

Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application Trim. IV

365 EN 2435-002:2006Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance Trim. IV

366 EN 2588:2006Aerospace series - Bearings, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads Trim. IV

367 EN 2591-211:2002Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance Trim. IV

368 EN 2591-222:2007Aerospace series - Elements of electrical and optical connection - Test methods - Part 222: Insertion Loss (I.L.) Trim. IV

369EN 2591-223:2007

Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact Trim. IV

370 EN 2591-225:2007Aerospace series - Elements of electrical and optical connection - Test methods - Part 225: RF high potential withstanding voltage Trim. IV

371 EN 2591-226:2007Aerospace series - Elements of electrical and optical connection - Test methods - Part 226: Corona level Trim. IV

372 EN 2591-307:2012Aerospace series. Elements of electrical and optical connection. Test methods. Part 307: Salt mist Trim. IV

373 EN 2591-325:2002Aerospace series - Elements of electrical and optical connection - Test methods - Part 325: Ice resistance Trim. IV

374 EN 2591-402:2012Aerospace series. Elements of electrical and optical connection. Test methods. Part 402: Shock Trim. IV

375 EN 2591-403:2012Aerospace series. Elements of electrical and optical connection. Test methods. Sinusoidal and random vibration Trim. IV

376 EN 2591-420:2006Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories Trim. IV

377EN 2591-514:2002

Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux Trim. IV

378 EN 2591-515:2005Aerospace series - Elements of electrical and optical connection - Test methods - Part 515: Hydrolytic stability Trim. IV

379 EN 2591-603:2002Aerospace series - Elements of electrical and optical connection - Test methods - Part 603: Optical elements - Change of power distribution Trim. IV

380 EN 2591-606:2002Aerospace series - Elements of electrical and optical connection - Test methods - Part 606: Optical elements - Crosstalk Trim. IV

381 EN 2591-614:2002Aerospace series - Elements of electrical and optical connection - Test methods - Part 614: Optical elements - Connector radial compression Trim. IV

382 EN 2591-617:2002Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling Trim. IV

383 EN 26:1997/AC:1998 Gas-fired instantaneous water heaters for sanitary uses, fitted with atmospheric burners Trim. IV

384 EN 2665-001:2013Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. Part 001: Technical specification Trim. IV

385EN 2665-004:2013

Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A. Part 004: UNC thread terminals. Product standard Trim. IV

386 EN 2667-2:2018Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 2: Compressive tube shear Trim. IV

387 EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels Trim. IV

388EN 2713-005:2006

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 005: Screened (spiral) and jacketed, CO2 laser printable - Product standard Trim. IV

389EN 2713-006:2006

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 006: Screened (braided) and jacketed, CO2 laser printable - Product standard Trim. IV

390EN 2713-008:2006

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard Trim. IV

391EN 2713-009:2006

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard Trim. IV

392

EN 2713-010:2006Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard Trim. IV

393EN 2714-004:2006

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 004: Screened (braided) and jacketed, ink jet printable - Product standard Trim. IV

394EN 2714-005:2006

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 005: Screened (spiral) and jacketed, CO2 laser printable - Product standard Trim. IV

395EN 2714-006:2006

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 006: Screened (braided) and jacketed, CO2 laser printable - Product standard Trim. IV

396EN 2714-008:2006

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 008: Screened (braided) and jacketed, UV laser printable - Product standard Trim. IV

397EN 2714-009:2007

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard Trim. IV

398

EN 2714-010:2006Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 010: Screened (braided) and jacketed, YAG X3 laser printable - Product standard Trim. IV

399

EN 2714-011:2005Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 011: DM family, screened (spiral) and jacketed, UV laser printable - Product standard Trim. IV

400

EN 2714-012:2005Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 012: DM family, screened (braided) and jacketed, UV laser printable - Product standard Trim. IV

401 EN 2795:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD Trim. IV

402 EN 2812:2009 Aerospace series. Stripping of electric cables Trim. IV

403

EN 2824:2011Aerospace series. Burning behaviour of non-metallic materials under the influence of radiating heat and flames. Determination of smoke density and gas components in the smoke of materials. Test equipment apparatus and media. Trim. IV

404EN 2826:2011

Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of gas components in the smoke Trim. IV

405 EN 287-6:2018 Qualification test of welders - Fusion welding - Part 6: Cast irons Trim. IV

406EN 2899:2018

Aerospace series - Vulcanized rubbers - Test on the susceptibility to corrosion in a damp atmosphere of metals in contact with vulcanized rubbers Trim. IV

407 EN 2944:2018Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004 Trim. IV

408 EN 298:2012Automatic burner control systems for burners and appliances burning gaseous or liquid fuels Trim. IV

409EN 2995-004:2006

Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard Trim. IV

410EN 2995-005:2006

Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard Trim. IV

411EN 2996-004:2006

Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard Trim. IV

412EN 2996-005:2006

Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard Trim. IV

413

EN 2997-008:2006Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 008: Plug - Product standard Trim. IV

414 EN 30-2-1:1998/A1:2003/AC:2004 Domestic cooking appliances burning gas. Part 2-1: Rational use of energy. General Trim. IV

415EN 3034:2009/AC:2011

Aerospace series. Nuts, self-locking, hexagonal with captive washer. In heat resisting steel FE-PA92HT (A286), silver coated Classification: 1100 MPa/425 °C Trim. IV

416EN 3052:2009

Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1 100 MPa (at ambient temperature) / 425 °C Trim. IV

417EN 3060:2007

Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads Trim. IV

418 EN 3082:2001/AC:2003Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, bulkhead welded end, for repair Trim. IV

419 EN 3083:2001/AC:2003Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, bulkhead, long welded end, for repair Trim. IV

420 EN 3084:2001/AC:2003Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, welded end threaded for repair Trim. IV

421 EN 3102:2013 Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility Trim. IV

422 EN 3155-002:2011Aerospace series. Electrical contacts used in elements of connection. Part 002: List and utilization of contacts Trim. IV

423EN 3155-005:2006

Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard Trim. IV

424EN 3155-009:2009

Aerospace series. Electrical contacts used in elements of connection. Part 009: Contacts, electrical, female, type A, crimp, class S. Product standard Trim. IV

425EN 3155-024:2006

Aerospace series - Electrical contacts used in elements of connection - Part 024: Contacts, electrical, triaxial, size 8, male, type D, crimp, class S - Product standard Trim. IV

426 EN 3155-026:2010 Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45° Trim. IV

427EN 3155-034:2007

Aerospace series - Electrical contacts used in elements of connection - Part 034: Contacts, electrical, triaxial, size 08, male, type D, crimp, class R - Product standard Trim. IV

428EN 3155-039:2007

Aerospace series - Electrical contacts used in elements of connection - Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard Trim. IV

429EN 3155-041:2007

Aerospace series - Electrical contacts used in elements of connection - Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard Trim. IV

430EN 3155-058:2006

Aerospace series - Electrical contacts used in elements of connection - Part 058: Contacts, electrical, coaxial, size 16, male, type D, solder, class R Product standard Trim. IV

431EN 3155-061:2006

Aerospace series - Electrical contacts used in elements of connection - Part 061: Contacts, electrical, coaxial, size 12, female, type D, solder, class R Product standard Trim. IV

432EN 3155-064:2009

Aerospace series. Electrical contacts used in elements of connection. Part 064: Contacts, electrical, coaxial, 50 ohms, size 1, female, type D, solder, class R. Product standard Trim. IV

433EN 3155-074:2009

Aerospace series. Electrical contacts used in elements of connection. Part 074: Contacts, electrical, quadrax, size 8, male, type E, crimp, class R - Product standard Trim. IV

434EN 3155-076:2012

Aerospace series. Electrical contacts used in elements of connection. Part 076: Contacts, electrical, male, type A, crimp, class R. Product standard Trim. IV

435EN 3218-009:2006

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors - Product standard Trim. IV

436EN 3218-011:2006

Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors - Product standard Trim. IV

437 EN 3264:2018 Aerospace series - Pipe coupling 8°30' in titanium alloy - Thrust wire nuts Trim. IV

438 EN 3270:2001/AC:2003 Aerospace series - Pipe coupling 8°30' in titanium alloy - Blanking plugs with lockring Trim. IV

439

EN 3372-001:2007Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 001: Technical specification Trim. IV

440

EN 3372-003:2007Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 003: Square flange receptacle - Product standard Trim. IV

441

EN 3372-011:2007Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 011: Dummy receptacle - Product standard Trim. IV

442 EN 3375-002:2012 Aerospace series. Cable, electrical, for digital data transmission. Part 002: General Trim. IV

443 EN 3375-006:2006Aerospace series - Cable, electrical, for digital data transmission - Part 006: Single braid - 78 Ohms - Type XM - Product standard Trim. IV

444 EN 3456:2012Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Sheet and strip, hot rolled - a ≤ 6 mm Trim. IV

445 EN 3475-100:2010 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 100: General Trim. IV

446 EN 3475-302:2006 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test Trim. IV

447 EN 3475-403:2002/AC:2003Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking Trim. IV

448 EN 3475-412:2002Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance Trim. IV

449 EN 3475-414:2005Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) Trim. IV

450 EN 3475-501:2006Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through Trim. IV

451EN 3475-510:2002

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material Trim. IV

452 EN 3475-603:2018Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking Trim. IV

453 EN 3475-604:2018Aerospace series - Cables, electrical, aircraft use - Test methods - Part 604: Resistance to dry arc propagation Trim. IV

454 EN 3475-605:2018Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short circuit test Trim. IV

455 EN 3475-704:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility Trim. IV

456 EN 3475-705:2005Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement Trim. IV

457 EN 3475-806:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 806: Attenuation Trim. IV

458 EN 3475-812:2009Aerospace series. Cables, electrical, aircraft use. Test methods. Part 812: Return loss (VSWR) Trim. IV

459 EN 3542:2018Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750) Trim. IV

460

EN 3545-002:2008Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements Trim. IV

461

EN 3545-008:2006Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 C to 175 C - Part 008: Tools for assembly/removal of coding and attachment system - Product standard Trim. IV

462 EN 3561:2001/AC:2003Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end Trim. IV

463 EN 3566:2001/AC:2003 Aerospace series - Pipe coupling 8°30' in titanium alloy - Adaptors with lockring Trim. IV

464

EN 3645-005:2006Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, brasage mounting - Product standard Trim. IV

465EN 3645-013:2007

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 013: Dummy receptacle - Product standard Trim. IV

466EN 3660-003:2009

Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 003: Grommet nut, style A for EN 2997 and EN 4067. Product standard Trim. IV

467

EN 3660-004:2009Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 004: Cable outlet, style A, straight, unsealed with clamp strain relief for EN 2997 and EN 4067. Product standard Trim. IV

468

EN 3660-005:2009Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997 and EN 4067. Product standard Trim. IV

469

EN 3660-006:2010Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 006: Cable outlet, self-locking, style C, straight, shielded (cone grounding), unsealed with clamp strain relief. Product standard Trim. IV

470

EN 3660-008:2010Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 008: Cable outlet, self-locking, style C, 45°, shielded (cone grounding), unsealed with clamp strain relief. Product standard Trim. IV

471EN 3660-009:2007

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 009: Cable outlet, style J, straight, sealed, for heat shrinkable boot - Product standard Trim. IV

472EN 3660-010:2010

Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 010: Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot. Product standard Trim. IV

473EN 3660-011:2010

Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 011: Cable outlet, style K, 90°, shielded, sealed, for heat shrinkable boot. Product standard Trim. IV

474EN 3660-012:2008

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 012: Grommet nut, style A for EN 3372 - Product standard Trim. IV

475EN 3660-013:2008

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 013: Cable outlet, style A, straight, unsealed, with cable tie strain relief - Product standard Trim. IV

476EN 3660-037:2009

Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Part 037: bushing strip, elastomer, for cable outlet, style Z Product standard Trim. IV

477EN 3662-005:2006

Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard Trim. IV

478EN 3662-006:2006

Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard Trim. IV

479 EN 3663:2001/AC:2003Aerospace series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, Temperature range: - 55 °C to 135 °C Trim. IV

480 EN 3668:2006Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D ≤ 250 mm Trim. IV

481EN 3682-001:2013

Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous. Part 001: Technical specification Trim. IV

482

EN 3682-002:2013Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous. Part 002: Specification of performance and contact arrangements Trim. IV

483EN 3682-005:2013

Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150$0DC continuous. Size 2 plug. Product standard Trim. IV

484EN 3682-007:2013

Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150$0DC continuous. Size 3 plug. Product standard Trim. IV

485EN 3682-008:2013

Aerospace series. Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150$0DC continuous. Size 4 receptacle. Product standard Trim. IV

486EN 3686:2008/AC:2009

Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated. Classification: 1 100 MPa/650 °C Trim. IV

487EN 3687:2010/AC:2011

Aerospace series. Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 1 100 MPa/650 °C Trim. IV

488 EN 3688:2001/AC:2003Aerospace series - T-ring fillers in titanium alloy for welding pipes - 14 000 kPa nominal pressure Trim. IV

489 EN 3689:2001/AC:2003Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28 000 kPa nominal pressure Trim. IV

490 EN 3690:2001/AC:2003 Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, bulkhead, long Trim. IV

491 EN 3691:2001/AC:2003Aerospace series - Pipe coupling 8°30' in titanium alloy - Unions, bulkhead, long welded end Trim. IV

492 EN 3697:2013Aerospace series. Acrylonitrile-butadiene rubber (NBR). Low temperature resistant. Hardness 60 IRHD Trim. IV

493 EN 3706:2012 Aerospace series. Headless threaded plugs, cross recess, in aluminium alloy 5086 Trim. IV

494 EN 3708-002:2006Aerospace series - Modular interconnection systems - Terminal junction systems - Part 002: Performance specification Trim. IV

495EN 3708-005:2006

Aerospace series - Modular interconnection systems - Terminal junction systems - Part 005: Frames with accessories for feedback modules version, sealed and unsealed - Product standard Trim. IV

496EN 3716-002:2006

Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions of use and list of product standards Trim. IV

497EN 3716-003:2006

Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 003: Solder receptacle - Product standard Trim. IV

498 EN 3716-006:2006Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 006: Crimp plug - Product standard Trim. IV

499EN 3733-002:2008

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 002: List of product standards Trim. IV

500EN 3733-003:2008

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 003: Plug connector for cable according to EN 4532, product standard Trim. IV

501

EN 3733-004:2008Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 004: Receptacle, connector, four hole fixing cable according to EN 4532, product standard Trim. IV

502

EN 3733-008:2006Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200 µm/280 µm fibre) - Product standard Trim. IV

503

EN 3733-009:2006Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 µm/280 µm fibre) - Product standard Trim. IV

504EN 3733-101:2008

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 101: Protective cover receptacle - Product standard Trim. IV

505EN 3733-103:2008

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 103: Protective cover jam nut receptacle - Product standard Trim. IV

506EN 3733-104:2008

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 104: Receptacle connector dummy four holes fixing - Product standard Trim. IV

507EN 3733-106:2008

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 106: Receptacle connector dummy jam nut - Product standard Trim. IV

508 EN 3745-201:2002Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 201: Visual examination Trim. IV

509 EN 3745-302:2002Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 302: Numerical aperture Trim. IV

510 EN 3745-303:2007Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 303: Bandwidth Trim. IV

511 EN 3745-402:2005Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling Trim. IV

512 EN 3745-406:2005Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test Trim. IV

513 EN 3745-412:2005Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance Trim. IV

514 EN 3745-502:2005Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502: Tensile stength for short length of optical fibres Trim. IV

515 EN 3745-509:2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 509: Kink test Trim. IV

516 EN 3745-511:2002Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 511: Cable to cable abrasion Trim. IV

517 EN 3745-512:2005Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance Trim. IV

518 EN 3745-705:2007Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement Trim. IV

519 EN 3788:2001/AC:2003 Aerospace series - Pipe coupling 8°30' - Protective caps Trim. IV

520 EN 3789:2001/AC:2003 Aerospace series - Pipe coupling 8°30' - Protective plugs with external threads Trim. IV

521 EN 3790:2001/AC:2003 Aerospace series - Pipe coupling 8°30' - Protective caps with internal threads Trim. IV522 EN 3841-100:2004 Aerospace series - Circuit breakers - Test methods - Part 100: General Trim. IV

523 EN 3841-302:2004 Aerospace series - Circuit breakers - Test methods - Part 302: Insulation resistance Trim. IV

524 EN 3841-401:2004 Aerospace series - Circuit breakers - Test methods - Part 401: Sand and dust Trim. IV525 EN 3841-402:2004 Aerospace series - Circuit breakers - Test methods - Part 402: Corrosion Trim. IV526 EN 3841-403:2004 Aerospace series - Circuit breakers - Test methods - Part 403: Humidity Trim. IV

527 EN 3841-404:2004 Aerospace series - Circuit breakers - Test methods - Part 404: Explosion proofness Trim. IV

528 EN 3841-407:2004 Aerospace series - Circuit breakers - Test methods - Part 407: Temperature variation Trim. IV

529 EN 3841-502:2004 Aerospace series - Circuit breakers - Test methods - Part 502: Operating forces Trim. IV

530 EN 3841-504:2004Aerospace series - Circuit breakers - Test methods - Part 504: Strength of mounting elements Trim. IV

531 EN 3841-510:2004Aerospace series - Circuit breakers - Test methods - Part 510: Strength of signal contact terminals Trim. IV

532 EN 3841-511:2004Aerospace series - Circuit breakers - Test methods - Part 511: Combined test: temperature, altitude and vibration Trim. IV

533EN 3843:2010

Aerospace series. Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated. Classification: 1 100 MPa (at ambient temperature) / 650 °C Trim. IV

534 EN 3844-1:2011Aerospace series. Flammability of non metallic materials. Part 1: Small burner test, vertical. Determination of the vertical flame propagation Trim. IV

535 EN 3856:2002Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire Trim. IV

536 EN 3863:2013Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of flatness Trim. IV

537 EN 3864:2013Aerospace series. Non-metallic materials. Glass transparencies. Test methods. Determination of modulus of rupture Trim. IV

538 EN 3889:2001 Aerospace series - Steel FE-WM3801 (X5CrNiCu17-4) - Filler metal for welding Trim. IV

539 EN 3-9:2006/AC:2007Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers Trim. IV

540 EN 3960:2001/AC:2002Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste Trim. IV

541EN 4008-002:2006

Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 002: List of product standards Trim. IV

542EN 4008-006:2006

Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 006: Positioner for crimping tool M22520/7 - Product standard Trim. IV

543EN 4008-007:2011

Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Part 007: Positioner for crimping tool M22520/2-01. Product standard Trim. IV

544EN 4008-008:2011

Aerospace series. Elements of electrical and optical connection. Crimping tools and associated accessories. Part 008: Positioner for crimping tool M22520/7-01. Product standard Trim. IV

545EN 4008-014:2006

Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 014: Turret for crimping tool M22520/31-01 - Product standard Trim. IV

546EN 4008-015:2007

Aerospace series - Elements of electrical and optical connection - Crimping tool and associated accessories - Part 015: Positioner for crimping tool M22520/2-01 - Product standard Trim. IV

547 EN 4014:2004 Aerospace series - Inserts, thickwall, self-locking - Design standard Trim. IV

548 EN 4015:2004 Aerospace series - Inserts, thickwall, self-locking - Installation and removal procedure Trim. IV549 EN 4032:2001/AC:2003 Aerospace series - Pipe couplings 8°30' in titanium alloy - Thrust wire Trim. IV

550 EN 4049-001:2006Aerospace series - Thermocouple extension cable - Operating tempera-tures between - 65 °C to 260 °C - Part 001: Technical specification Trim. IV

551EN 4050-2:2012

Aerospace series. Test method for metallic materials. Ultrasonic inspection of bars, plates, forging stock and forgings. Part 2: Performance of test Trim. IV

552 EN 4057-302:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 302: Flammability Trim. IV

553 EN 4057-401:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength Trim. IV

554 EN 4057-405:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 405: Compass safe distance Trim. IV

555 EN 4057-407:2005Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings Trim. IV

556EN 4122:2018

Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 °C Trim. IV

557EN 4123:2018

Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread - Classification: 1 550 MPa (at ambient temperature) / 600 °C Trim. IV

558EN 4124:2018

Aerospace series - Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage - Classification: 1 210 MPa (at ambient temperature) / 730 °C Trim. IV

559EN 4129:2009/AC:2010

Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C Trim. IV

560EN 4130:2009/AC:2010

Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature) / 425 °C Trim. IV

561

EN 4131:2009/AC:2010Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1 250 MPa (at ambient temperature) / 425 °C Trim. IV

562EN 4136:2009/AC:2010

Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C Trim. IV

563EN 4161:2009/AC:2010

Aerospace series. Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C Trim. IV

564EN 417:2012

Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and marking Trim. IV

565 EN 419212-4:2018Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 4: Privacy specific Protocols Trim. IV

566 EN 419212-5:2018Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 5: Trusted eService Trim. IV

567 EN 419221-5:2018Protection Profiles for TSP Cryptographic Modules - Part 5: Cryptographic Module for Trust Services Trim. IV

568 EN 4195:2011Aerospace series. Paints and varnishes. Test method for determination of chromate leaching Trim. IV

569EN 4198:2006

Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads Trim. IV

570 EN 4199-001:2013 Aerospace series. Bonding straps for aircraft. Part 001: Technical specification Trim. IV

571EN 4216:2007

Aerospace series - Steel FE-CM3801 (GX5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened, investment casting De ≤ 50 mm, Rm ≥ 900 MPa Trim. IV

572 EN 4250:2001Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil Trim. IV

573 EN 4267:2001Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm < = D < = 160 mm - Dimensions Trim. IV

574 EN 4286:2005 Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a Trim. IV

575EN 4318:2007

Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section De ≤ 100 mm, Rm ≥ 960 MPa Trim. IV

576 EN 4334:2002Aerospace series - Steel FE-WL1806 (15CrMnMoV5-4-9-3) - Filler metal for welding - Wire and rod Trim. IV

577 EN 4340:2002 Aerospace series - Magnesium alloy MG-W68001 - Filler metal for welding - Wire and rod Trim. IV

578 EN 4342:2001 Aerospace series - Titanium TI-W99001 - Filler metal for welding - Wire and rod Trim. IV

579 EN 4343:2002 Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod Trim. IV

580 EN 4358:2006 Aerospace series - Six lobe recess - Drivers, double ended, 90° Trim. IV581 EN 4359:2006 Aerospace series - Six lobe recess - Drivers - Technical specification Trim. IV

582EN 438-8:2009

High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (Usually called Laminates). Part 8: Classification and specifications for design laminates Trim. IV

583 EN 4408-001:2005Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1: General rules Trim. IV

584 EN 4408-002:2005Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2: Laminated parts Trim. IV

585 EN 4408-003:2005Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials Trim. IV

586 EN 4408-004:2005Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 4: Items obtained by winding Trim. IV

587 EN 4408-005:2005Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 5: Seams Trim. IV

588 EN 4408-006:2005Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6: Preforms Trim. IV

589 EN 4429:2006 Aerospace series - Textiles - Testing of narrow woven fabrics - Determination of warp bow Trim. IV

590

EN 4465:2007Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 300 MPa Trim. IV

591 EN 4503:2013Aerospace series. Non-metallic materials. Textiles. Test method. Determination of water soluble chloride and sulfate of aqueous extracts Trim. IV

592 EN 4505:2013Aerospace series. Non-metallic materials. Textiles. Test method. Determination of dimensional stability Trim. IV

593 EN 4507:2013Aerospace series. Non-metallic materials. Textiles. Test method. Determination of water extractable matter Trim. IV

594 EN 4526:2013Aerospace series. Metallic materials. Test methods. Sharp edge-notch tensile testing for sheet and strip Trim. IV

595 EN 4529-003:2006Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard Trim. IV

596 EN 4530-002:2006Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves Trim. IV

597EN 4530-005:2006

Aerospace series - Sealing sleeves used in elements of connection - Part 005: Sealing sleeves for external diameter cable 3 mm to 4,1 mm - Product standard Trim. IV

598EN 4530-006:2006

Aerospace series - Sealing sleeves used in elements of connection - Part 006: Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm - Product standard Trim. IV

599 EN 4532:2009Aerospace series. Cables, optical, single core 200 μm/280 μm fibre, 2,5 mm outer jacket. Technical specification Trim. IV

600 EN 4533-004:2018Aerospace series - Fibre optic systems - Handbook - Part 004: Repair, maintenance, cleaning and inspection Trim. IV

601

EN 4539-003:2010Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Wide series. Dimensions and loads. Part 003: Inch series with low friction coefficient Trim. IV

602 EN 4550-3:2003Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 3: Port connections Trim. IV

603 EN 4556:2003 Aerospace series - Pipe coupling 37°, in heat resisting steel - Cap assemblies- Inch series Trim. IV

604 EN 4593:2011 Aerospace series. Paints and varnishes. Determination of solar absorptance Trim. IV

605EN 4604-004:2007

Aerospace series - Cable, electrical, for signal transmission - Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200 °C, type WS - Product standard Trim. IV

606 EN 4604-006:2009Aerospace series. Cable, electrical, for signal transmission. Part 006: Cable, coaxial, 50 ohm, 200° C, type WM. Product Standard Trim. IV

607 EN 4604-007:2007Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial 50 Ω, 200 °C, type WN - Product standard Trim. IV

608

EN 4608-001:2006Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 001: Technical specification Trim. IV

609

EN 4608-003:2012Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 °C and 260 °C. Part 003: DN family. Lightweight. UV Laser printable. Product standard Trim. IV

610 EN 4617:2006 Aerospace series - Recommended practices for standardising company standards Trim. IV

611

EN 4626-001:2008Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures -65 °C to 125 °C (cable dependent) - Flush contacts - Part 001: Technical specification Trim. IV

612

EN 4626-004:2008Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 004: Adaptor for receptacle Trim. IV

613 EN 4628:2013Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa Trim. IV

614EN 4632-003:2010

Aerospace series. Weldability and brazeability of materials in aerospace constructions. Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels Trim. IV

615EN 4632-005:2009

Aerospace series. Weldability and brazeability of materials in aerospace constructions. Part 005: Homogeneous assemblies of heat resisting Ni or Co base alloys Trim. IV

616 EN 4638:2010 Aerospace series. Blast media. Brown corundum, without iron Trim. IV

617EN 4641-104:2010

Aerospace series. Cables, optical 125 μm diameter cladding. Part 104: Semi-loose, ruggedized duplex construction 62,5/125 μm GI fibre nominal, 4,95 mm outside diameter. Product standard Trim. IV

618EN 4645-001:2010

Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Part 001: Technical specification Trim. IV

619

EN 4645-002:2009Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Specification of performance and contact arrangements Trim. IV

620

EN 4645-004:2009Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Part 004: Jam nut receptacle. Product standard Trim. IV

621EN 4645-005:2009

Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder. Part 005: Plug. Product standard Trim. IV

622 EN 4650:2010 Aerospace series. Wire and cable marking process, UV Laser Trim. IV

623 EN 4652-221:2017/AC:2018Aerospace series - Connectors, coaxial, radio frequency - Part 221: Type 2, TNC interface - Crimp version - Right angle plug - Product standard Trim. IV

624 EN 4660-001:2011 Aerospace series. Modular and Open Avionics Architectures. Part 001: Architecture Trim. IV

625 EN 4660-002:2011Aerospace series. Modular and Open Avionics Architectures. Part 002: Common Functional Modules Trim. IV

626 EN 4660-003:2011Aerospace series. Modular and Open Avionics Architectures. Part 003: Communications/Network Trim. IV

627 EN 4660-004:2011 Aerospace series. Modular and Open Avionics Architectures. Part 004: Packaging Trim. IV

628 EN 4660-005:2011 Aerospace series. Modular and Open Avionics Architectures. Part 005: Software Trim. IV

629 EN 4673-006:2010Aerospace series. Inserts, UNJ threads, self-locking, with selfbroaching keys. Part 006: In heat resisting steel FE-PA2601 (A286), MoS2 coated Trim. IV

630EN 4689:2012

Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application Trim. IV

631 EN 4691-2:2018 Aerospace series - Tie rod with integrated bolts - Part 2: Overview construction kit Trim. IV

632EN 4708-301:2018

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 301: Adhesive lined polyolefin sleevings - Operating temperature - 55 °C to 105 °C - Product Standard Trim. IV

633 EN 4731:2018Aerospace series - Spectral quality of LED luminaires used with photoluminescent marking systems Trim. IV

634 EN 474-1:2006+A5:2018 Earth-moving machinery - Safety - Part 1: General requirements Trim. IV

635 EN 477:2018Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to impact of profiles by falling mass Trim. IV

636 EN 478:2018Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C Trim. IV

637 EN 479:2018 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of heat reversion Trim. IV638 EN 4817:2012 Aerospace series. Passive UHF RFID tags intended for aircraft use Trim. IV639 EN 492:2012+A2:2018 Fibre-cement slates and fittings - Product specification and test methods Trim. IV

640 EN 50052:1986 Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear Trim. IV

641 EN 50090-3-3:2009Home and Building Electronic Systems (HBES) - Part 3-3: Aspects of application - HBES Interworking model and common HBES data types Trim. IV

642EN 50090-3-4:2017/AC:2018-05

Home and Building Electronic Systems (HBES) - Part 3-4: Secure Application Layer, Secure Service, Secure configuration and security Resources Trim. IV

643EN 50109-2-3:1995

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors Trim. IV

644EN 50109-2-4:1995

Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ Trim. IV

645EN 50117-2-5:2004/AC:2012

Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz Trim. IV

646 EN 50121-1:2006/corrigendum May 20Railway applications - Electromagnetic compatibility - Part 1: General Trim. IV

647 EN 50121-2:2006/corrigendum May 20Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world Trim. IV

648 EN 50121-3-1:2006/corrigendum May Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle Trim. IV

649 EN 50121-3-2:2006/corrigendum May Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus Trim. IV

650 EN 50121-4:2006/corrigendum May 20Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus Trim. IV

651 EN 50121-5:2006/corrigendum May 20Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus Trim. IV

652EN 50124-1:2001/corrigendum May 20

Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment Trim. IV

653 EN 50124-2:2001/corrigendum May 20Railway applications - Insulation coordination - Part 2: Overvoltages and related protection Trim. IV

654 EN 50129:2003/corrigendum May 2010Railway applications – Communication, signalling and processing systems – Safety related electronic systems for signalling Trim. IV

655 EN 50131-1:2006/A1:2009 Alarm systems - Intrusion and hold-up systems - Part 1: System requirements Trim. IV

656 EN 50131-2-5:2008/IS1:2014Alarm systems - Intrusion and hold-up systems - Part 2-5: Requirements for combined passive infrared and ultrasonic detectors Trim. IV

657 EN 50131-2-7-2:2012/IS1:2014Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) Trim. IV

658 EN 50134-3:2012 Alarm systems - Social alarm systems - Part 3: Local unit and controller Trim. IV

659 EN 50174-2:2018Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings Trim. IV

660 EN 50239:2018Railway applications - Radio remote control system of traction vehicle for shunting application Trim. IV

661 EN 50262:1998/corrigendum Oct. 1998Cable glands for electrical installations Trim. IV

662EN 50271:2018

Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies Trim. IV

663 EN 50307:2002 Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables Trim. IV

664 EN 50325-1:2002Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements Trim. IV

665 EN 50362:2003Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits Trim. IV

666

EN 50364:2018Product standard for human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications Trim. IV

667

EN 50377-10-1:2007Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-1: Type MU-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category Trim. IV

668

EN 50377-11-1:2008Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C Trim. IV

669EN 50377-6-1:2002

Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 6-1: Type SC-RJ terminated on IEC 60793-2 category A1a and A1b multimode fibre Trim. IV

670

EN 50377-8-5:2007Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-5: LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category U Trim. IV

671

EN 50377-8-8:2007Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-8: LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U Trim. IV

672EN 50411-2-8:2009

Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-8: Microduct connectors, for air blown optical fibres, Type 1 Trim. IV

673 EN 50436-1:2005Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments for drink-driving-offender programs Trim. IV

674 EN 50496:2018Determination of workers' exposure to electromagnetic fields and assessment of risk at a broadcast site Trim. IV

675 EN 50508:2009 Multi-purpose insulating sticks for electrical operations on high voltage installations Trim. IV

676

EN 50516-2-1:2011Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 2-1: Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the r Trim. IV

677EN 50525-2-21:2011/AC:2013

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation Trim. IV

678 EN 50533:2011/A1:2016 Railway applications. Three-phase train line voltage characteristics Trim. IV

679 EN 50562:2018Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric traction systems Trim. IV

680 EN 50569:2013/A1:2018Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors Trim. IV

681 EN 50570:2013/A1:2018Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers Trim. IV

682 EN 50571:2013/A1:2018Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines Trim. IV

683 EN 50580:2012/A1:2013 Safety of hand-held electric motor operated tools - Particular requirements for spray guns Trim. IV684 EN 50583-2:2016 Photovoltaics in buildings. Part 2: BIPV systems Trim. IV

685

EN 50588-2:2018Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 2: Transformers with cable boxes on the high-voltage and/or low-voltage side - General requirements for transformers with rated power less than or equal to 3 150 kVA Trim. IV

686

EN 50588-3:2018Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 3: Transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on transformers meeting the requirements of EN 50588-2 Trim. IV

687

EN 50588-4:2018Medium power transformers 50 Hz, with highest voltage for equipment not exceeding 36 kV - Part 4: Transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 2 for use on transformers meeting the requirements of EN 50588-2 Trim. IV

688 EN 50629:2015/A2:2018 Energy performance of large power transformers (Um > 36 kV or Sr ≥ 40 MVA) Trim. IV

689 EN 50636-2-107:2015/A1:2018Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers Trim. IV

690EN 55014-2:1997/corrigendum Dec. 19

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard Trim. IV

691EN 55016-1-1:2010

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus Trim. IV

692EN 55016-2-3:2010

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements Trim. IV

693EN 55016-2-4:2004

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements Trim. IV

694 EN 60061-1:1993/A57:2018Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps Trim. IV

695 EN 60061-2:1993/A53:2018Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders Trim. IV

696 EN 60061-3:1993/A54:2018Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges Trim. IV

697 EN 60065:2002/A1:2006 Audio, video and similar electronic apparatus - Safety requirements Trim. IV698 EN 60065:2002/A11:2008 Audio, video and similar electronic apparatus - Safety requirements Trim. IV699 EN 60065:2002/A2:2010 Audio, video and similar electronic apparatus - Safety requirements Trim. IV

700EN 60068-2-69:2017/AC:2018-03

Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method Trim. IV

701 EN 60079-30-2:2007Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance Trim. IV

702 EN 60081:1998/A11:2018 Double-capped fluorescent lamps - Performance specifications Trim. IV

703 EN 60094-7:1993Magnetic tape sound recording and reproducing systems - Part 7: Cassette for commercial tape records and domestic use Trim. IV

704EN 60107-8:1997

Recommended methods of measurement on receivers for television broadcast transmissions - Part 8: Measurement on D2-MAC/packet equipment Trim. IV

705 EN 60115-1:2011 Fixed resistors for use in electronic equipment - Part 1: Generic specification Trim. IV706 EN 60122-1:2002/A1:2018 Quartz crystal units of assessed quality - Part 1: Generic specification Trim. IV

707 EN 60127-1:2006/A2:2015Miniature fuses. Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1:2006/A2:2015) Trim. IV

708 EN 60154-1:1994 Flanges for waveguides - Part 1: General requirements Trim. IV

709 EN 60154-2:1997Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides Trim. IV

710 EN 60191-3:1999Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits Trim. IV

711 EN 60252-1:2011/A1:2013AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation Trim. IV

712

EN 60297-3-106:2010Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1 Trim. IV

713 EN 60310:2016/AC:2018-03 Railway applications - Traction transformers and inductors on board rolling Stock Trim. IV

714EN 60317-33:1996

Specifications for particular types of winding wires - Part 33: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 Trim. IV

715 EN 60335-1:2002/A12:2006/corrigendu Household and similar electrical appliances - Safety - Part 1: General requirements Trim. IV

716 EN 60335-1:2002/A15:2011 Household and similar electrical appliances - Safety - Part 1: General requirements Trim. IV

717 EN 60335-1:2012/AC:2014 Household and similar electrical appliances. Safety. Part 1: General requirements Trim. IV

718 EN 60335-2-21:2003/corrigendum Oct. Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters Trim. IV

719 EN 60335-2-30:2009/corrigendum Mar Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters Trim. IV

720EN 60335-2-31:2003/corrigendum Dec

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors Trim. IV

721 EN 60350-2:2018 Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance Trim. IV

722 EN 60352-5:2012Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance Trim. IV

723 EN 60358-1:2012/AC:2013 Coupling capacitors and capacitor dividers - Part 1: General rules Trim. IV

724 EN 60368-3:2010 Piezoelectric filters of assessed quality - Part 3: Standard outlines and lead connections Trim. IV

725EN 60384-24-1:2006

Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ Trim. IV

726EN 60384-26-1:2010

Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ Trim. IV

727EN 60384-4:2007

Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte Trim. IV

728EN 60384-4-2:2007

Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte - Assessment level EZ Trim. IV

729 EN 60406:1997 Cassettes for medical X-ray diagnosis - Radiographic cassettes and mammographic cassettes Trim. IV

730EN 6041:2018

Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) Trim. IV

731

EN 60444-4:1997Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 4: Method for the measurement of the load resonance frequency fL, load resonance resistance RL and the calculation of other derived values of quartz crystal units Trim. IV

732EN 60444-5:1997

Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction Trim. IV

733EN 60510-2-5:1994

Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section 5: Frequency modulators Trim. IV

734 EN 60512-12-3:2006Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting Trim. IV

735EN 60512-12-5:2006

Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method Trim. IV

736EN 60512-14-7:1998

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water Trim. IV

737 EN 60512-17-1:2010Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness Trim. IV

738EN 60512-19-1:2010

Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels Trim. IV

739EN 60512-19-3:1997

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance Trim. IV

740 EN 60512-4-1:2003Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof Trim. IV

741 EN 60512-8-1:2010Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse Trim. IV

742EN 60512-8-3:2011

Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever Trim. IV

743 EN 60570:2003/A1:2018 Electrical supply track systems for luminaires Trim. IV744 EN 60598-1:2015/A1:2018 Luminaires - Part 1: General requirements and tests Trim. IV745 EN 60598-2-11:2005/corrigendum Aug Luminaires. Part 2-11: Particular requirements. Aquarium luminaires Trim. IV

746 EN 60598-2-12:2006/corrigendum Dec Luminaires. Part 2-12: Particular requirements. Mains socket-outlet mounted nightlights Trim. IV

747 EN 60598-2-22:1998/corrigendum Dec Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting Trim. IV

748 EN 60598-2-22:1998/corrigendum Feb. Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting Trim. IV

749 EN 60598-2-22:1998/corrigendum Oct. Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting Trim. IV

750 EN 60598-2-22:2014/AC:2015 Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting Trim. IV

751 EN 60598-2-4:2018Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires Trim. IV

752 EN 60598-2-5:1998/corrigendum Dec. Luminaires - Part 2-5: Particular requirements - Floodlights Trim. IV

753 EN 60601-1:1990 Medical electrical equipment - Part 1: General requirements for safety Trim. IV

754 EN 60601-2-21:2009/A11:2011Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers Trim. IV

755EN 60601-2-30:2000

Medical electrical equipment. Particular requirements for safety. Particular requirements for safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment Trim. IV

756EN 60601-2-43:2010/A1:2018

Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures Trim. IV

757EN 60601-2-65:2013

Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment Trim. IV

758EN 60601-3-1:1996

Medical electrical equipment - Part 3-1: Essential performance requirements for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment Trim. IV

759EN 60603-5:1998

Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing Trim. IV

760EN 60603-7-3:2010

Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz Trim. IV

761EN 60603-7-51:2010

Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz Trim. IV

762 EN 60669-1:2018Switches for household and similar fixed electrical installations - Part 1: General requirements Trim. IV

763 EN 60674-2:2017/AC:2018-01 Specification for plastic films for electrical purposes - Part 2: Methods of test Trim. IV

764 EN 60679-3:2013Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections Trim. IV

765EN 60679-6:2011

Quartz crystal controlled oscillators of assessed quality - Part 6: Phase jitter measurement method for quartz crystal oscillators and SAW oscillators - Application guidelines Trim. IV

766 EN 60728-6:2011Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment Trim. IV

767 EN 60730-1:1995 Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

768 EN 60730-1:1995/A1:1997 Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

769 EN 60730-1:1995/A11:1996 Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

770 EN 60730-1:1995/A12:1996 Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

771 EN 60730-1:1995/A14:1998 Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

772 EN 60730-1:1995/A15:1998 Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

773 EN 60730-1:1995/A16:1999 Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

774 EN 60730-1:1995/A17:2000 Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

775 EN 60730-1:1995/A18:2003 Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

776 EN 60730-1:1995/A2:1998 Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

777 EN 60730-1:1995/corrigendum Aug. 20Automatic electrical controls for household and similar use - Part 1: General requirements Trim. IV

778 EN 60731:2012 Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy Trim. IV

779 EN 60747-16-4:2004 Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches Trim. IV

780 EN 60747-16-4:2004/A1:2011 Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches Trim. IV

781 EN 60761-4:2004Equipment for continuous monitoring radioactivity in gaseous effluents - Part 4: Specific requirements for iodine monitors Trim. IV

782 EN 60774-4:2003Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type VHS - Part 4: S-VHS video cassette system - ET-mode Trim. IV

783 EN 60793-1-22:2002Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement Trim. IV

784 EN 60793-1-32:2010 Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability Trim. IV

785 EN 60793-1-34:2006 Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl Trim. IV

786 EN 60793-2-50:2013Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres Trim. IV

787EN 60794-3-60:2008

Optical fibre cables - Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes Trim. IV

788 EN 60794-5:2007Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing Trim. IV

789 EN 60821:1994 IEC 60821 VMEbus - Microprocessor system bus for 1 byte to 4 byte data Trim. IV

790

EN 60835-1-3:1995Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 3: Transmission characteristics Trim. IV

791

EN 60835-1-4:1995Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 4: Transmission performance Trim. IV

792

EN 60835-2-4:1995Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 4: Transmitter/receiver including modulator/demodulator Trim. IV

793EN 60835-2-5:1995

Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 5: Digital signal processing sub-system Trim. IV

794EN 60835-3-10:1994

Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 10: Terminal equipment - TDMA traffic earth stations Trim. IV

795EN 60835-3-6:1996

Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High power amplifiers Trim. IV

796EN 60870-6-701:1998

Telecontrol equipment and systems - Part 6-701: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Functional profile for providing the TASE.1 application service in end systems Trim. IV

797EN 60898-1:2003/IS3:2007

Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation Trim. IV

798 EN 60958-3:2006 Digital audio interface - Part 3: Consumer applications Trim. IV

799EN 60966-2-6:2009

Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors Trim. IV

800 EN 60968:2013/A11:2014 Self-ballasted lamps for general lighting services - Safety requirements Trim. IV

801EN 61000-4-3:2006/IS1:2009

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test Trim. IV

802EN 61000-6-5:2015/AC:2018-01

Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment Trim. IV

803 EN 61009-1:2004/corrigendum Jul. 200Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules Trim. IV

804 EN 61016:2001Helical-scan digital component video cassette recording system using 19 mm magnetic tape (format D-1) Trim. IV

805EN 61023:2007

Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results Trim. IV

806 EN 61029-2-5:2011Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws Trim. IV

807 EN 61076-2-103:2004Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR') Trim. IV

808EN 61076-3-103:2004

Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) Trim. IV

809

EN 61076-3-114:2009Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments Trim. IV

810EN 61076-4:1996

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors Trim. IV

811

EN 61076-4-103:1999Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm Trim. IV

812

EN 61076-4-111:2002Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm Trim. IV

813

EN 61108-3:2010Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results Trim. IV

814 EN 61111:2009 Live working - Electrical insulating matting Trim. IV

815EN 61114-2:1996

Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas Trim. IV

816 EN 61119-1:1994 Digital audio tape cassette system (DAT) - Part 1: Dimensions and characteristics Trim. IV

817 EN 61157:2007Standard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment Trim. IV

818 EN 61158-3-11:2008Industrial communication networks - Fieldbus specifications - Part 3-11: Data-link layer service definition - Type 11 elements Trim. IV

819 EN 61158-4-18:2012Industrial communication networks - Fieldbus specifications - Part 4-18: Data-link layer protocol specification - Type 18 elements Trim. IV

820 EN 61158-5-7:2008Industrial communication networks - Fieldbus specifications - Part 5-7: Application layer service definition - Type 7 elements Trim. IV

821 EN 61158-6-15:2012Industrial communication networks - Fieldbus specifications - Part 6-15: Application layer protocol specification - Type 15 elements Trim. IV

822EN 61169-14:2010

Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3,5/12) Trim. IV

823

EN 61169-29:2005Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type 1,0/2,3) - 50 omhs Trim. IV

824 EN 61169-35:2011 Radio-frequency connectors - Part 35: Sectional specification for 2,92 series RF connectors Trim. IV

825 EN 61169-41:2011Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors Trim. IV

826EN 61189-11:2013

Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 11: Measurement of melting temperature or melting temperature ranges of solder alloys Trim. IV

827 EN 61192-2:2003Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies Trim. IV

828EN 61223-3-2:2008

Evaluation and routine testing in medical imaging departments - Part 3-2: Acceptance tests - Imaging performance of mammographic X-ray equipment Trim. IV

829 EN 61243-3:2014/AC:2015 Live working - Voltage detectors - Part 3: Two-pole low-voltage type Trim. IV

830

EN 61249-4-15:2009Materials for printed boards and other interconnecting structures - Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (ve Trim. IV

831EN 61249-5-1:1996

Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) Trim. IV

832 EN 61262-4:1994Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the image distortion Trim. IV

833EN 61262-6:1994

Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index Trim. IV

834 EN 61280-2-8:2003Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements Trim. IV

835EN 61280-4-4:2006

Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links Trim. IV

836 EN 61290-10-2:2008Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer Trim. IV

837 EN 61291-2:2012 Optical amplifiers - Part 2: Digital applications - Performance specification template Trim. IV

838 EN 61291-4:2012 Optical amplifiers - Part 4: Multichannel applications - Performance specification template Trim. IV

839 EN 61300-2-14:2013Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power Trim. IV

840EN 61300-2-18:2005

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance Trim. IV

841 EN 61300-2-29:1997Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure Trim. IV

842 EN 61300-2-5:2011Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion Trim. IV

843EN 61300-3-22:2011

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force Trim. IV

844EN 61300-3-23:1998

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements - Fibre position relative to ferrule endface Trim. IV

845

EN 61300-3-24:2007Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre Trim. IV

846

EN 61300-3-36:2000Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules Trim. IV

847

EN 61300-3-49:2013Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49: Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors Trim. IV

848

EN 61300-3-7:2012Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components Trim. IV

849 EN 61305-2:1998Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 2: FM radio tuners Trim. IV

850 EN 61305-5:2003Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 5: Loudspeakers Trim. IV

851 EN 61309:1995 Deep-fat fryers for household use - Methods for measuring the performance Trim. IV

852 EN 61327:1995Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-3 Trim. IV

853 EN 61332:2005 Soft ferrite material classification Trim. IV

854EN 61334-4-512:2002

Distribution automation using distribution line carrier systems - Part 4-512: Data communication protocols - System management using profile 61334-5-1 - Management Information Base (MIB) Trim. IV

855 EN 61347-1:2008/A2:2013 Lamp controlgear - Part 1: General and safety requirements Trim. IV

856 EN 61477:2009/corrigendum Mar. 201 Live working - Minimum requirements for the utilization of tools, devices and equipment Trim. IV857 EN 61512-3:2008 Batch control - Part 3: General and site recipe models and representation Trim. IV858 EN 61512-4:2010 Batch control - Part 4: Batch production records Trim. IV

859EN 61526:2013

Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters Trim. IV

860EN 61587-3:2013

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks Trim. IV

861 EN 61595-3:1999Multichannel digital audio tape recorder (DATR), reel-to-reel system, for professional use - Part 3: 24-bit operation for 16-bit media Trim. IV

862 EN 61603-1:1997Transmission of audio and/or video and related signals using infra-red radiation - Part 1: General Trim. IV

863EN 61643-11:2012/A11:2018

Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods Trim. IV

864 EN 61643-312:2013Components for low-voltage surge protective devices - Part 312: Selection and application principles for gas discharge tubes Trim. IV

865 EN 61643-321:2002Components for low-voltage surge protective devices - Part 321: Specifications for Avalanche Breakdown Diode (ABD) Trim. IV

866 EN 61674:2013Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging Trim. IV

867 EN 61747-2-2:2004Liquid crystal display devices. Part 2-2: Matrix colour LCD modules. Blank detail specification (IEC 61747-2-2:2004) Trim. IV

868 EN 61747-6-2:2011Liquid crystal display devices - Part 6-2: Measuring methods for liquid crystal display modules - Reflective type Trim. IV

869EN 61747-6-3:2011

Liquid crystal display devices - Part 6-3: Measuring methods for liquid crystal display modules - Motion artifact measurement of active matrix liquid crystal display modules Trim. IV

870EN 61753-057-2:2013

Fibre optic interconnecting devices and passive components - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment Trim. IV

871EN 61753-083-2:2008

Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment Trim. IV

872

EN 61753-086-2:2009Fibre optic interconnecting devices and passive components performance standard - Part 086-2: Non-connectorised single-mode bidirectional 1490 / 1550 nm downstream 1310 nm upstream WWDM devices for category C - Controlled environment Trim. IV

873

EN 61753-087-2:2011Fibre optic interconnecting devices and passive components - Performance standard - Part 087-2: Non-connectorized single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category C - Controlled environment Trim. IV

874

EN 61753-089-2:2013Fibre optic interconnecting devices and passive components - Performance standard - Part 089-2: Non-connectorized single-mode bidirectional OTDR monitoring WWDM devices for category C - Controlled environment Trim. IV

875EN 61753-092-6:2007

Fibre optic interconnecting devices and passive components performance standard - Part 092-6: Non-connectorized single-mode circulators for category O - Uncontrolled environment and sequential test Trim. IV

876EN 61753-101-2:2006

Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for category C - Controlled environment Trim. IV

877

EN 61753-121-2:2010Fibre optic interconnecting devices and passive components - Performance standards - Part 121-2: Simplex and duplex cords with singlemode fibre and cylindrical ferrule connectors for category C - Controlled environment Trim. IV

878EN 61753-131-3:2011

Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment Trim. IV

879 EN 61754-13:2006 Fibre optic connector interfaces - Part 13: Type FC-PC connector Trim. IV

880 EN 61754-15:2009Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 15: Type LSH connector family Trim. IV

881 EN 61754-22:2005 Fibre optic connector interfaces - Part 22: Type F-SMA connector family Trim. IV

882 EN 61754-7:2008Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family Trim. IV

883EN 61755-3-1:2009

Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre Trim. IV

884

EN 61755-3-7:2009Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 3-7: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fib Trim. IV

885 EN 61770:2009/A11:2018Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets Trim. IV

886 EN 61784-3-14:2010Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14 Trim. IV

887 EN 61784-3-18:2011Industrial communication networks - Profiles - Part 3-18: Functional safety fieldbuses - Additional specifications for CPF 18 Trim. IV

888 EN 61784-3-8:2010Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 Trim. IV

889 EN 61784-5-10:2012Industrial communication networks - Profiles - Part 5-10: Installation of fieldbuses - Installation profiles for CPF 10 Trim. IV

890 EN 61784-5-18:2013Industrial communication networks - Profiles - Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18 Trim. IV

891EN 61800-7-303:2008

Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies Trim. IV

892EN 61834-4:1998

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 4: Pack header table and contents Trim. IV

893EN 61837-2:2011

Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures Trim. IV

894 EN 61850-5:2013Communication networks and systems for power utility automation - Part 5: Communication requirements for functions and device models Trim. IV

895EN 61850-6:2010

Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs Trim. IV

896 EN 61883-4:2005 Consumer audio/video equipment - Digital interface - Part 4: MPEG2-TS data transmission Trim. IV

897EN 61937-10:2011

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 10: Non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format Trim. IV

898 EN 61947-1:2002Electronic projection - Measurement and documentation of key performance criteria - Part 1: Fixed resolution projectors Trim. IV

899EN 61967-5:2003

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 5: Measurement of conducted emissions - Workbench Faraday Cage method Trim. IV

900EN 61968-13:2008

Application integration at electric utilities - System interfaces for distribution management - Part 13: CIM RDF Model exchange format for distribution Trim. IV

901EN 61968-4:2007

Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records and asset management Trim. IV

902 EN 61969-3:2012Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects Trim. IV

903 EN 61970-452:2015Energy management system application program interface (EMS-API). CIM model exchange specification Trim. IV

904 EN 61988-2-3:2009Plasma display panels - Part 2-3: Measuring methods - Image quality: defects and degradation Trim. IV

905 EN 61988-2-4:2011 Plasma display panels - Part 2-4: Measuring methods - Visual quality: Image artifacts Trim. IV906 EN 61988-4:2007 Plasma display panels - Part 4: Climatic and mechanical testing methods Trim. IV

907 EN 62008:2005Performance characteristics and calibration methods for digital data acquisition systems and relevant software Trim. IV

908EN 62037-2:2013

Passive RF and microwave devices, intermodulation level measurement - Part 2: Measurement of passive intermodulation in coaxial cable assemblies Trim. IV

909EN 62047-13:2012

Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures Trim. IV

910 EN 62052-21:2004/A1:2017/AC:2018-0Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment Trim. IV

911EN 62053-24:2015/A1:2017/AC:2018-0

Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1) Trim. IV

912 EN 62054-11:2004/A1:2017/AC:2018-0Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers Trim. IV

913 EN 62054-21:2004/A1:2017/AC:2018-0Electricity metering (AC) - Tariff and load control - Part 21: Particular requirements for time switches Trim. IV

914EN 62056-8-5:2017/AC:2018-01

Electricity metering data exchange - The DLMS/COSEM suite - Part 8-5: Narrow-band OFDM G3-PLC communication profile for neighbourhood networks Trim. IV

915 EN 62115:2005/A11:2012/AC:2013 Electric toys - Safety Trim. IV

916 EN 62149-7:2012Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices Trim. IV

917 EN 62196-1:2012/A11:2013Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements Trim. IV

918 EN 62196-1:2012/A12:2014Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements Trim. IV

919 EN 62196-1:2012/AC:2012Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements Trim. IV

920 EN 62261-2:2006 Television METADATA - Part 2: Data encoding protocol using key-length-value Trim. IV

921 EN 62264-5:2012 Enterprise system integration - Part 5: Business to manufacturing transactions Trim. IV

922 EN 62271-100:2009/A2:2017/AC:2018-High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers Trim. IV923 EN 62271-101:2013/A1:2018 High-voltage switchgear and controlgear - Part 101: Synthetic testing Trim. IV

924EN 62359:2011/A1:2018

Ultrasonics - Field characterization - Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields Trim. IV

925EN 62376:2011

Maritime navigation and radiocommunication equipment and systems - Electronic chart system (ECS) - Operational and performance requirements, methods of testing and required test results Trim. IV

926 EN 624:2000/A2:2007Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats Trim. IV

927 EN 62439-1:2010Industrial communication networks - High availability automation networks - Part 1: General concepts and calculation methods Trim. IV

928 EN 62439-1:2010/A1:2012Industrial communication networks - High availability automation networks - Part 1: General concepts and calculation methods Trim. IV

929 EN 62439-2:2010Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP) Trim. IV

930 EN 62439-2:2017/AC:2018-06Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP) Trim. IV

931 EN 62446:2009Grid connected photovoltaic systems – Minimum requirements for system documentation, commissioning tests and inspection Trim. IV

932 EN 62453-301:2009+AMD1:2017Field device tool (FDT) interface specification - Part 301:Communication profile integration - IEC 61784 CPF 1 Trim. IV

933 EN 62481-3:2011Digital living network alliance (DLNA) home networked device interoperability guidelines - Part 3: Link protection Trim. IV

934EN 62489-1:2010/A2:2018

Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of measuring and specifying the performance of system components Trim. IV

935 EN 62595-2:2013 LCD backlight unit - Part 2: Electro-optical measurement methods of LED backlight unit Trim. IV

936 EN 62605:2011Multimedia systems and equipment - Multimedia e-publishing and e-books - Interchange format for e-dictionaries Trim. IV

937EN 62841-2-1:2018

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills Trim. IV

938EN 62841-3-1:2014/A11:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) Trim. IV

939EN 62841-3-14:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners Trim. IV

940EN 62841-3-4:2016/A11:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders Trim. IV

941EN 62841-3-6:2014/A11:2017

Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system Trim. IV

942

EN 62841-3-6:2014/AC:2015Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) Trim. IV

943EN 62841-3-9:2015/A11:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws Trim. IV

944 EN 62927:2017/AC:2018-01Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical Testing Trim. IV

945EN 63029:2017/AC:2018-02

Audio, video and multimedia systems and equipment - Multimedia e-publishing and e-book technologies - Raster-graphics image-based e-books Trim. IV

946EN 689:2018

Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values Trim. IV

947 EN 71-1:2014+A1:2018 Safety of toys - Part 1: Mechanical and physical properties Trim. IV948 EN 71-3:2013+A3:2018 Safety of toys - Part 3: Migration of certain elements Trim. IV949 EN 71-7:2014+A2:2018 Safety of toys - Part 7: Finger paints - Requirements and test methods Trim. IV950 EN 71-8:2018 Safety of toys - Part 8: Activity toys for domestic use Trim. IV951 EN 736-1:2018 Valves - Terminology - Part 1: Definition of types of valves Trim. IV

952 EN 748:2013+A1:2018 Playing field equipment - Football goals - Functional and safety requirements, test methods Trim. IV

953EN 81-21:2018

Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing building Trim. IV

954EN 81-28:2018

Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts Trim. IV

955 EN 81-58:2018Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test Trim. IV

956EN 81-70:2018

Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lift - Part 70: Accessibility to lifts for persons including persons with disability Trim. IV

957EN 81-71:2018

Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts Trim. IV

958 EN 9100:2018Quality Management Systems - Requirements for Aviation, Space and Defence Organizations Trim. IV

959 EN 9101:2018Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations Trim. IV

960 EN 9110:2018 Quality Management Systems - Requirements for Aviation Maintenance Organizations Trim. IV

961 EN 9120:2018 Quality Management Systems - Requirements for Aviation, Space and Defence Distributors Trim. IV

962 EN 9133:2018Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products Trim. IV

963 EN 9136:2018 Aerospace series - Root cause analysis and problem solving (9S Methodology) Trim. IV964 EN 9162:2018 Aerospace series - Aerospace Operator Self-Verification Programs Trim. IV

965 EN 9223-100:2018Programme Management - Configuration Management - Part 100: A guide for the application of the principles of configuration management Trim. IV

966 EN 9223-101:2018Programme Management - Configuration Management - Part 101: Configuration identification Trim. IV

967 EN 9223-102:2018Programme Management - Configuration Management - Part 102: Configuration status accounting Trim. IV

968 EN 9223-103:2018Programme Management - Configuration Management - Part 103: Configuration Verifications, Reviews and Audits Trim. IV

969 EN 9223-104:2018 Programme Management - Configuration Management - Part 104: Configuration Control Trim. IV970 EN 9223-105:2018 Programme Management - Configuration Management - Part 105: Glossary Trim. IV

971EN 9300-002:2018

Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 002: Requirements Trim. IV

972EN 9300-010:2018

Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 010: Overview Data Flow Trim. IV

973EN 9300-110:2018

Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 110: CAD mechanical 3D Explicit geometry information Trim. IV

974

EN 9300-200:2018Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 200: Common Concepts for LOng Term Archiving and Retrieval of Product Structure Information Trim. IV

975EN IEC 60034-27-1:2018

Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines Trim. IV

976EN IEC 60034-27-4:2018

Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines Trim. IV

977EN IEC 60051-5:2018

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes Trim. IV

978EN IEC 60051-6:2018

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters Trim. IV

979EN IEC 60051-7:2018

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments Trim. IV

980 EN IEC 60051-8:2018Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories Trim. IV

981 EN IEC 60068-2-52:2018 Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) Trim. IV

982 EN IEC 60068-3-5:2018Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers Trim. IV

983 EN IEC 60068-3-6:2018Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers Trim. IV

984 EN IEC 60079-7:2015/A1:2018 Explosive atmospheres - Part 7: Equipment protection by increased safety "e" Trim. IV985 EN IEC 60099-5:2018 Surge arresters - Part 5: Selection and application recommendations Trim. IV

986EN IEC 60099-8:2018

Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV Trim. IV

987 EN IEC 60118-4:2015/A1:2018Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements Trim. IV

988 EN IEC 60191-1:2018Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices Trim. IV

989 EN IEC 60230:2018 Impulse tests on cables and their accessories Trim. IV

990 EN IEC 60370:2018Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods Trim. IV

991EN IEC 60512-15-2:2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial) Trim. IV

992EN IEC 60512-8-3:2018

Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever Trim. IV

993 EN IEC 60519-12:2018Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating Trim. IV

994 EN IEC 60598-2-17:2018Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor) Trim. IV

995EN IEC 60601-2-2:2018

Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories Trim. IV

996 EN IEC 60728-3:2018Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5) Trim. IV

997 EN IEC 60749-12:2018Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency Trim. IV

998EN IEC 60749-26:2018

Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) Trim. IV

999 EN IEC 60793-1-45:2018 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter Trim. IV

1000 EN IEC 60793-1-47:2018 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss Trim. IV

1001 EN IEC 60793-1-54:2018 Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation Trim. IV

1002 EN IEC 60794-1-22:2018Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods Trim. IV

1003 EN IEC 60809:2015/A2:2018 Lamps for road vehicles - Dimensional, electrical and luminous requirements Trim. IV

1004

EN IEC 60893-3-6:2004/A2:2018Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins Trim. IV

1005 EN IEC 60942:2018 Electroacoustics - Sound calibrators Trim. IV

1006EN IEC 61010-2-201:2018

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment Trim. IV

1007 EN IEC 61058-1:2018 Switches for appliances - Part 1: General requirements Trim. IV

1008EN IEC 61076-2-111:2018

Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking Trim. IV

1009

EN IEC 61076-3-119:2018

Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz Trim. IV

1010EN IEC 61125:2018

Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state Trim. IV

1011EN IEC 61190-1-3:2018

Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solder for electronic soldering applications Trim. IV

1012 EN IEC 61204-7:2018 Low-voltage switch mode power supplies - Part 7: Safety requirements Trim. IV

1013

EN IEC 61249-2-45:2018

Materials for printed boards and other interconnecting structures - Part 2-45: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity （1.0W/m K） and defined flammability (vertical burning test), copper-clad for lead-free assembly Trim. IV

1014

EN IEC 61249-2-46:2018

Materials for printed boards and other interconnecting structures - Part 2-46: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity （1.5W/m K） and defined flammability (vertical burning test), copper-clad for lead-free assembly Trim. IV

1015

EN IEC 61249-2-47:2018

Materials for printed boards and other interconnecting structures - Part 2-47: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminate sheets of thermal conductivity （2.0W/m K） and defined flammability (vertical burning test), copper-clad for lead-free assembly Trim. IV

1016 EN IEC 61281-1:2018 Fibre optic communication subsystems - Part 1: Generic specification Trim. IV

1017 EN IEC 61340-4-3:2018 Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear Trim. IV

1018EN IEC 61340-4-5:2018

Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person Trim. IV

1019 EN IEC 61643-331:2018Components for low-voltage surge protection - Part 331: Performance requirements and test methods for metal oxide varistors (MOV) Trim. IV

1020EN IEC 61643-352:2018

Components for low-voltage surge protection - Part 352: Selection and application principles for telecommunications and signalling network surge isolation transformers (SITs) Trim. IV

1021EN IEC 61754-7-2:2018

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows Trim. IV

1022 EN IEC 61804-2:2018Function blocks (FB) for process control and electronic device description language (EDDL) - Part 2: Specification of FB concept Trim. IV

1023 EN IEC 61869-10:2018Instrument transformers - Part 10: Additional requirements for low-power passive current transformers Trim. IV

1024 EN IEC 61869-11:2018Instrument transformers - Part 11: Additional requirements for low-power passive voltage transformers Trim. IV

1025 EN IEC 61938:2018Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability Trim. IV

1026 EN IEC 61968-3:2018Application integration at electric utilities - System interfaces for distribution management - Part 3: Interface for network operations Trim. IV

1027 EN IEC 62024-1:2018High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor Trim. IV

1028 EN IEC 62056-6-2:2018Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes Trim. IV

1029 EN IEC 62148-1:2018Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance Trim. IV

1030 EN IEC 62228-1:2018Integrated circuits - EMC evaluation of transceivers - Part 1: General conditions and definitions Trim. IV

1031 EN IEC 62271-110:2018 High-voltage switchgear and controlgear - Part 110: Inductive load switching Trim. IV

1032 EN IEC 62271-110:2018/AC:2018-03 High-voltage switchgear and controlgear - Part 110: Inductive load switching Trim. IV

1033 EN IEC 62343-5-2:2018Dynamic modules - Part 5-2: Test methods - 1xN fixed-grid WSS - Dynamic crosstalk measurement Trim. IV

1034 EN IEC 62386-332:2018Digital addressable lighting interface - Part 332: Particular requirements - Input devices - Feedback Trim. IV

1035EN IEC 62439-3:2018

Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) (IEC 62439-3:2016) Trim. IV

1036 EN IEC 62439-5:2018Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP) (IEC 62439-5:2016) Trim. IV

1037 EN IEC 62443-4-1:2018Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements Trim. IV

1038EN IEC 62453-303-1:2009/A1:2018

Field device tool (FDT) interface specification - Part 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2 (IEC 62453-303-1:2009/A1:2016) Trim. IV

1039 EN IEC 62554:2011/A1:2018 Sample preparation for measurement of mercury level in fluorescent lamps Trim. IV

1040 EN IEC 62559-3:2018Use case methodology - Part 3: Definition of use case template artefacts into an XML serialized format Trim. IV

1041 EN IEC 62561-2:2018Lightning protection system components (LPSC) - Part 2: Requirements for conductors and earth electrodes Trim. IV

1042 EN IEC 62561-6:2018Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) Trim. IV

1043 EN IEC 62561-6:2018/AC:2018-04Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) Trim. IV

1044 EN IEC 62561-7:2018Lightning protection system components (LPSC) - Part 7: Requirements for earthing enhancing compounds Trim. IV

1045 EN IEC 62576:2018Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics Trim. IV

1046 EN IEC 62604-2:2018Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 2: Guidelines for the use Trim. IV

1047

EN IEC 62631-3-11:2018Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials Trim. IV

1048 EN IEC 62677-1:2018 Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements Trim. IV

1049 EN IEC 62677-2:2018 Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test Trim. IV

1050EN IEC 62677-3-101:2018

Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications Trim. IV

1051

EN IEC 62677-3-102:2018Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 102: Heat-shrinkable, polyolefin, anti-tracking moulded shapes for medium voltage applications Trim. IV

1052 EN IEC 62688:2018 Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification Trim. IV1053 EN IEC 62731:2018 Text-to-speech for television - General requirements Trim. IV1054 EN IEC 62793:2018 Protection against lightning - Thunderstorm warning systems Trim. IV

1055 EN IEC 62820-2:2018Building intercom systems - Part 2: Requirements for advanced security building intercom systems (ASBIS) Trim. IV

1056 EN IEC 62820-3-1:2018 Building intercom systems - Part 3-1: Application guidelines - General Trim. IV

1057 EN IEC 62820-3-2:2018Building intercom systems - Part 3-2: Application guidelines - Advanced security building intercom systems (ASBIS) Trim. IV

1058EN IEC 62822-3:2018

Electric welding equipment - Assessment of restrictions related to human exposure to electromagnetic fields (0 Hz to 300 Hz) - Part 3: Resistance welding equipment Trim. IV

1059EN IEC 62828-1:2018

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters Trim. IV

1060EN IEC 62828-2:2018

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters Trim. IV

1061EN IEC 62828-3:2018

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters Trim. IV

1062 EN IEC 62909-1:2018 Bi-directional grid-connected power converters - Part 1: General requirements Trim. IV

1063 EN IEC 62919:2018Content management - Monitoring and management of personal digital content (IEC 62919:2017) Trim. IV

1064 EN IEC 62933-2-1:2018Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification Trim. IV

1065EN IEC 62969-1:2018

Semiconductor devices - Semiconductor interface for automotive vehicles - Part 1: General requirements of power interface for automotive vehicle sensors Trim. IV

1066 EN IEC 63041-1:2018 Piezoelectric sensors - Part 1: Generic specifications Trim. IV1067 EN IEC 63041-2:2018 Piezoelectric sensors - Part 2: chemical and biochemical Sensors Trim. IV

1068 EN IEC 63044-3:2018Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements Trim. IV

1069EN IEC 80601-2-71:2018

Medical electrical equipment - Part 2-71: Particular requirements for the basic safety and essential performance of functional near-infrared spectroscopy (NIRS) equipment Trim. IV

1070 EN ISO 10139-1:2018Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2018) Trim. IV

1071 EN ISO 10215:2018Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018) Trim. IV

1072 EN ISO 10256-2:2018Protective equipment for use in ice hockey - Part 2: Head protection for skaters (ISO 10256-2:2016) Trim. IV

1073 EN ISO 10256-3:2018Protective equipment for use in ice hockey - Part 3: Face protectors for skaters (ISO 10256-3:2016) Trim. IV

1074 EN ISO 10256-4:2018Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (ISO 10256-4:2016) Trim. IV

1075 EN ISO 10341:2012 Ophthalmic instruments. Refractor heads (ISO 10341:2012) Trim. IV

1076 EN ISO 10364:2018Structural adhesives - Determination of the pot life (working life) of multi-component adhesives (ISO 10364:2015) Trim. IV

1077 EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test (ISO 10399:2017) Trim. IV

1078EN ISO 10426-1:2009/AC:2018

Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification - Technical Corrigendum 2 (ISO 10426-1:2009/Cor 2:2012) Trim. IV

1079EN ISO 10438-1:2007

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries- Part 1: General requirements (ISO 10438-1:2007) Trim. IV

1080EN ISO 10438-2:2007

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems (ISO 10438-2:2007) Trim. IV

1081EN ISO 10438-3:2007

Petroleum, petrochemical and natural gas industries -Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2007) Trim. IV

1082EN ISO 10438-4:2007

Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2007) Trim. IV

1083 EN ISO 10545-3:2018Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018) Trim. IV

1084 EN ISO 10582:2018Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10582:2017) Trim. IV

1085EN ISO 10619-1:2018

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017) Trim. IV

1086EN ISO 10619-2:2018

Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017) Trim. IV

1087 EN ISO 10637:2018 Dentistry - Central suction source equipment (ISO 10637:2018) Trim. IV

1088 EN ISO 10960:2018Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017) Trim. IV

1089 EN ISO 10993-11:2018Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2017) Trim. IV

1090EN ISO 11073-10424:2016/AC:2018

Health informatics - Personal health device communication - Part 10424: Device specialization - Sleep apnoea breathing therapy equipment (SABTE) - Technical Corrigendum 1 (ISO/IEEE 11073-10424:2016/Cor 1:2018) Trim. IV

1091EN ISO 11073-10427:2018

Health informatics - Personal health device communication - Part 10427: Device specialization - Power status monitor of personal health devices(ISO/IEEE 11073-10427:2018) Trim. IV

1092 EN ISO 11130:2018 Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2017) Trim. IV

1093EN ISO 11133:2014/A1:2018

Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media - Amendment 1 (ISO 11133:2014/Amd 1:2018) Trim. IV

1094 EN ISO 11260:2018Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:2018) Trim. IV

1095 EN ISO 11296-1:2018Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018) Trim. IV

1096EN ISO 11296-2:2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018) Trim. IV

1097EN ISO 11296-3:2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018) Trim. IV

1098EN ISO 11296-4:2018

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018) Trim. IV

1099 EN ISO 11297-1:2018Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018) Trim. IV

1100EN ISO 11297-2:2018

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018) Trim. IV

1101EN ISO 11297-4:2018

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018) Trim. IV

1102 EN ISO 11298-1:2018Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018) Trim. IV

1103 EN ISO 11298-2:2018Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018) Trim. IV

1104EN ISO 11357-3:2018

Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018) Trim. IV

1105EN ISO 11357-6:2018

Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2018) Trim. IV

1106 EN ISO 11363-1:2018Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018) Trim. IV

1107 EN ISO 11402:2005/AC:2006Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004) Trim. IV

1108EN ISO 11542-2:1998/AC:2008

Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998/Cor 1:2007) Trim. IV

1109 EN ISO 11666:2018 Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2018) Trim. IV

1110EN ISO 11737-1:2018

Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2018) Trim. IV

1111 EN ISO 11747:2012/A1:2018Rice - Determination of rice kernel resistance to extrusion after cooking - Amendment 1 (ISO 11747:2012/Amd 1:2017) Trim. IV

1112

EN ISO 1179-2:2013Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) Trim. IV

1113EN ISO 11979-10:2018

Ophthalmic implants - Intraocular lenses - Part 10: Clinical investigations of intraocular lenses for correction of ametropia in phakic eyes (ISO 11979-10:2018) Trim. IV

1114 EN ISO 11979-7:2018Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia (ISO 11979-7:2018) Trim. IV

1115 EN ISO 12138:2018Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO 12138:2017) Trim. IV

1116EN ISO 12570:2000/A2:2018

Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000/Amd 2:2018) Trim. IV

1117 EN ISO 12866:1999/A1:2008 Ophthalmic instruments - Perimeters - Amendment 1 Trim. IV

1118 EN ISO 12870:2018 Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2016) Trim. IV

1119EN ISO 12944-5:2018

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018) Trim. IV

1120EN ISO 12944-6:2018

Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) Trim. IV

1121

EN ISO 12944-9:2018Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018) Trim. IV

1122 EN ISO 13078-2:2016Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze (ISO 13078-2:2016) Trim. IV

1123EN ISO 13259:2018

Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2018) Trim. IV

1124 EN ISO 13408-2:2018 Aseptic processing of health care products - Part 2: Sterilizing filtration (ISO 13408-2:2018) Trim. IV

1125 EN ISO 13485:2016/AC:2018Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) Trim. IV

1126

EN ISO 13766-1:2018Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions (ISO 13766-1:2018) Trim. IV

1127

EN ISO 13766-2:2018Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018) Trim. IV

1128 EN ISO 13897:2018 Dentistry - Dental amalgam reusable mixing-capsules (ISO 13897:2018) Trim. IV

1129 EN ISO 13918:2018 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017) Trim. IV

1130 EN ISO 14024:2018Environmental labels and declarations - Type I environmental labelling - Principles and procedures (ISO 14024:2018) Trim. IV

1131 EN ISO 14044:2006/A1:2018Environmental management - Life cycle assessment - Requirements and guidelines - Amendment 1 (ISO 14044:2006/Amd 1:2018) Trim. IV

1132 EN ISO 14114:2018Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017) Trim. IV

1133 EN ISO 14118:2018 Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017) Trim. IV

1134 EN ISO 14155:2011/AC:2011Clinical investigation of medical devices for human subjects. Good clinical practice. Technical Corrigendum 1 (ISO 14155:2011/Cor 1:2011) Trim. IV

1135 EN ISO 14254:2018Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO 14254:2018) Trim. IV

1136 EN ISO 14607:2018Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018) Trim. IV

1137 EN ISO 14688-1:2018Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO 14688-1:2017) Trim. IV

1138 EN ISO 14688-2:2018Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO 14688-2:2017) Trim. IV

1139 EN ISO 14689:2018Geotechnical investigation and testing - Identification, description and classification of rock (ISO 14689:2017) Trim. IV

1140 EN ISO 14918:2018 Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018) Trim. IV

1141 EN ISO 15011-4:2018Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 4: Fume data sheets Trim. IV

1142 EN ISO 15085:2003/A2:2018Small craft - Man-overboard prevention and recovery - Amendment 2 (ISO 15085:2003/Amd 2:2017) Trim. IV

1143 EN ISO 15296:2018 Gas welding equipment - Vocabulary (ISO 15296:2017) Trim. IV

1144 EN ISO 15496:2018Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control (ISO 15496:2018) Trim. IV

1145 EN ISO 15653:2018Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018) Trim. IV

1146 EN ISO 15797:2018Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2017) Trim. IV

1147EN ISO 15874-2:2013/A1:2018

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendment 1 (ISO 15874-2:2013/Amd 1:2018) Trim. IV

1148EN ISO 15874-3:2013/A1:2018

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 1 (ISO 15874-3:2013/Amd 1:2018) Trim. IV

1149EN ISO 15874-5:2013/A1:2018

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 15874-5:2013/Amd 1:2018) Trim. IV

1150 EN ISO 16090-1:2018Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017) Trim. IV

1151 EN ISO 16092-1:2018 Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017) Trim. IV

1152 EN ISO 16092-3:2018Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) Trim. IV

1153 EN ISO 16147:2018Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components (ISO 16147:2018) Trim. IV

1154 EN ISO 16228:2018 Fasteners - Types of inspection documents (ISO 16228:2017) Trim. IV

1155 EN ISO 16283-2:2018Acoustics - Field measurement of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 16283-2:2018) Trim. IV

1156 EN ISO 16380:2018 Road vehicles - Blended fuels refuelling connector (ISO 16380:2014, including Amd 1:2016) Trim. IV

1157 EN ISO 16923:2018 Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016) Trim. IV

1158 EN ISO 16924:2018 Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016) Trim. IV

1159 EN ISO 1716:2018Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2018) Trim. IV

1160 EN ISO 17419:2018Intelligent transport systems - Cooperative systems - Globally unique identification (ISO 17419:2018) Trim. IV

1161 EN ISO 17423:2018Intelligent transport systems - Cooperative systems - Application requirements and objectives (ISO 17423:2018) Trim. IV

1162EN ISO 17450-4:2018

Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017) Trim. IV

1163EN ISO 17601:2018

Soil quality - Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil (ISO 17601:2016) Trim. IV

1164EN ISO 17633:2018

Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2017) Trim. IV

1165 EN ISO 17892-12:2018Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits (ISO 17892-12:2018) Trim. IV

1166 EN ISO 17892-7:2018Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test (ISO 17892-7:2017) Trim. IV

1167 EN ISO 17892-8:2018Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test (ISO 17892-8:2018) Trim. IV

1168EN ISO 17892-9:2018

Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO 17892-9:2018) Trim. IV

1169 EN ISO 18187:2018Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO 18187:2016) Trim. IV

1170EN ISO 18311:2018

Soil quality - Method for testing effects of soil contaminants on the feeding activity of soil dwelling organisms - Bait-lamina test (ISO 18311:2016) Trim. IV

1171EN ISO 18541-6:2018

Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 6: L-Category vehicle specific RMI use cases and requirements (ISO 18541-6:2018) Trim. IV

1172 EN ISO 18618:2018 Dentistry - Interoperability of CAD/CAM systems (ISO 18618:2018) Trim. IV

1173EN ISO 18640-1:2018

Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating torso (ISO 18640-1:2018) Trim. IV

1174EN ISO 18640-2:2018

Protective clothing for firefighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters (ISO 18640-2:2018) Trim. IV

1175 EN ISO 18750:2018 Intelligent transport systems - Co-operative ITS - Local dynamic map (ISO 18750:2018) Trim. IV

1176 EN ISO 1891-4:2018Fasteners - Vocabulary - Part 4: Control, inspection, delivery, acceptance and quality (ISO 1891-4:2018) Trim. IV

1177 EN ISO 19008:2018Standard cost coding system for oil and gas production and processing facilities (ISO 19008:2016) Trim. IV

1178 EN ISO 19011:2018 Guidelines for auditing management systems (ISO 19011:2018) Trim. IV1179 EN ISO 19023:2018 Dentistry - Orthodontic anchor screws (ISO 19023:2018) Trim. IV

1180 EN ISO 19085-1:2017/AC:2018 Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) Trim. IV

1181 EN ISO 19085-4:2018Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018) Trim. IV

1182 EN ISO 19085-8:2018Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) Trim. IV

1183 EN ISO 19115-1:2014/A1:2018Geographic information - Metadata - Part 1: Fundamentals - Amendment 1 (ISO 19115-1:2014/Amd 1:2018) Trim. IV

1184 EN ISO 19146:2018 Geographic information - Cross-domain vocabularies (ISO 19146:2018) Trim. IV

1185 EN ISO 19157:2013/A1:2018Geographic information - Data quality - Amendment 1: Describing data quality using coverages (ISO 19157:2013/Amd 1:2018) Trim. IV

1186 EN ISO 19448:2018Dentistry - Analysis of Fluoride Concentration in Aqueous Solutions by use of Fluoride-Ion Selective Electrode (ISO 19448:2018) Trim. IV

1187EN ISO 20029-1:2018

Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification (ISO 20029-1:2017) Trim. IV

1188EN ISO 20029-2:2018

Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017) Trim. IV

1189 EN ISO 20126:2012/A1:2018Dentistry - Manual toothbrushes - General requirements and test methods - Amendment 1 (ISO 20126:2012/Amd 1:2018) Trim. IV

1190EN ISO 20418-1:2018

Textiles - Qualitative and quantitative proteomic analysis of some animal hair fibres - Part 1: Peptide detection using LC-ESI-MS with protein reduction (ISO 20418-1:2018) Trim. IV

1191 EN ISO 20485:2018 Non-destructive testing - Leak testing - Tracer gas method (ISO 20485:2017) Trim. IV

1192 EN ISO 20486:2018Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017) Trim. IV

1193 EN ISO 20608:2018 Dentistry - Powder jet handpieces and powders (ISO 20608:2018) Trim. IV

1194EN ISO 20623:2018

Petroleum and related products. Determination of the extreme-pressure and anti-wear properties of lubricants. Four-ball method (European conditions). Trim. IV

1195 EN ISO 20701:2018 Leather - Tests for colour fastness - Colour fastness to saliva (ISO 20701:2017) Trim. IV

1196 EN ISO 2081:2018Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2018) Trim. IV

1197 EN ISO 20863:2018 Footwear - Test methods for stiffeners and toepuffs - Bondability (ISO 20863:2018) Trim. IV

1198EN ISO 21028-2:2018

Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018) Trim. IV

1199EN ISO 21225-1:2018

Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018) Trim. IV

1200EN ISO 21225-2:2018

Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018) Trim. IV

1201 EN ISO 21533:2018Dentistry - Reprocessable cartridge syringes for intraligamentary injections (ISO 21533:2018) Trim. IV

1202

EN ISO 21904-3:2018Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO 21904-3:2018) Trim. IV

1203 EN ISO 22000:2018Food safety management systems - Requirements for any organization in the food chain (ISO 22000:2018) Trim. IV

1204 EN ISO 22300:2018 Security and resilience - Vocabulary (ISO 22300:2018) Trim. IV

1205EN ISO 22477-4:2018

Geotechnical investigation and testing - Testing of geotechnical structures - Part 4: Testing of piles: dynamic load testing (ISO 22477-4:2018) Trim. IV

1206 EN ISO 22477-5:2018Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors (ISO 22477-5:2018) Trim. IV

1207 EN ISO 23537-1:2016/A1:2018Requirements for sleeping bags - Part 1: Thermal and dimensional requirements - Amendment 1 (ISO 23537-1:2016/Amd 1:2018) Trim. IV

1208 EN ISO 23900-1:2018Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction (ISO 23900-1:2015) Trim. IV

1209

EN ISO 23900-2:2018Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling (ISO 23900-2:2015) Trim. IV

1210

EN ISO 23900-3:2018Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling (ISO 23900-3:2015) Trim. IV

1211EN ISO 2555:2018

Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018) Trim. IV

1212 EN ISO 26203-1:2018Metallic materials - Tensile testing at high strain rates - Part 1: Elastic-bar-type systems (ISO 26203-1:2018) Trim. IV

1213EN ISO 26304:2018

Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017) Trim. IV

1214 EN ISO 28017:2018Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2018) Trim. IV

1215EN ISO 2819:2018

Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO 2819:2017) Trim. IV

1216 EN ISO 28319:2018 Dentistry - Laser welding and filler materials (ISO 28319:2018) Trim. IV

1217

EN ISO 28706-3:2018Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle (ISO 28706-3:2017) Trim. IV

1218 EN ISO 2931:2018Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017) Trim. IV

1219 EN ISO 29988-1:2018Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2018) Trim. IV

1220EN ISO 29988-2:2018

Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 29988-2:2018) Trim. IV

1221EN ISO 3175-1:2018

Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2017) Trim. IV

1222EN ISO 3175-2:2018

Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene (ISO 3175-2:2017) Trim. IV

1223EN ISO 3175-3:2018

Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents (ISO 3175-3:2017) Trim. IV

1224EN ISO 3175-4:2018

Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning (ISO 3175-4:2018) Trim. IV

1225 EN ISO 3183:2012/A1:2018Petroleum and natural gas industries - Steel pipe for pipeline transportation systems - Amendment 1 (ISO 3183:2012/Amd 1:2017) Trim. IV

1226EN ISO 3822-3:2018

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances (ISO 3822-3:2018) Trim. IV

1227 EN ISO 3887:2018 Steels - Determination of the depth of decarburization (ISO 3887:2017) Trim. IV

1228EN ISO 389-1:2018

Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:2017) Trim. IV

1229 EN ISO 4045:2018 Leather - Chemical tests - Determination of pH and difference figure (ISO 4045:2018) Trim. IV

1230 EN ISO 41001:2018Facility management - Management systems - Requirements with guidance for use (ISO 41001:2018) Trim. IV

1231 EN ISO 41011:2018 Facility management - Vocabulary (ISO 41011:2017) Trim. IV

1232 EN ISO 41012:2018Facility management - Guidance on strategic sourcing and the development of agreements (ISO 41012:2017) Trim. IV

1233 EN ISO 4254-5:2018Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2018) Trim. IV

1234 EN ISO 4254-8:2018 Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018) Trim. IV

1235 EN ISO 4264:2007/A1:2013Petroleum products. Calculation of cetane index of middle- distillate fuels by the four-variable equation (ISO 4264:2007/Amd 1:2013) Trim. IV

1236 EN ISO 4490:2018Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2018) Trim. IV

1237 EN ISO 4506:2018 Hardmetals - Compression test (ISO 4506:2018) Trim. IV

1238 EN ISO 4545-1:2018 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2017) Trim. IV

1239 EN ISO 4545-2:2018Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017) Trim. IV

1240 EN ISO 4545-3:2018Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017) Trim. IV

1241 EN ISO 4545-4:2018Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017) Trim. IV

1242EN ISO 4829-1:2018

Steel and cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon contents between 0,05 % and 1,0 % (ISO 4829-1:2018) Trim. IV

1243 EN ISO 4885:2018 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2018) Trim. IV

1244 EN ISO 5165:2018Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2017) Trim. IV

1245

EN ISO 5395-1:2013/A1:2018Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration) (ISO 5395-1:2013/Amd 1:2017) Trim. IV

1246

EN ISO 5395-3:2013/A2:2018Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017) Trim. IV

1247 EN ISO 5458:2018Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018) Trim. IV

1248 EN ISO 5667-3:2018Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2018) Trim. IV

1249 EN ISO 5832-2:2018 Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:2018) Trim. IV

1250 EN ISO 6270-1:2018Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017) Trim. IV

1251EN ISO 6270-2:2018

Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2017) Trim. IV

1252EN ISO 6412-1:2018

Technical product documentation - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:2017) Trim. IV

1253 EN ISO 6412-2:2018Technical product documentation - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:2017) Trim. IV

1254EN ISO 6412-3:2018

Technical product documentation - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:2017) Trim. IV

1255 EN ISO 6507-1:2018 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018) Trim. IV

1256 EN ISO 6507-2:2018Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018) Trim. IV

1257 EN ISO 6507-3:2018Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018) Trim. IV

1258 EN ISO 6507-4:2018Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018) Trim. IV

1259 EN ISO 683-1:2018Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016) Trim. IV

1260 EN ISO 683-2:2018Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016) Trim. IV

1261 EN ISO 683-3:2018Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2016) Trim. IV

1262 EN ISO 683-4:2018Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels (ISO 683-4:2016) Trim. IV

1263 EN ISO 6872:2015/A1:2018 Dentistry - Ceramic materials (ISO 6872:2015/Amd 1:2018) Trim. IV

1264 EN ISO 6892-2:2018Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018) Trim. IV

1265 EN ISO 6978-1:2005Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine (ISO 6978-1:2003 ) Trim. IV

1266 EN ISO 7345:2018Thermal performance of buildings and building components - Physical quantities and definitions (ISO 7345:2018) Trim. IV

1267EN ISO 7393-2:2017

Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-dialkyl-1,4-phenylenediamine, for routine control purposes (ISO 7393-2:2017) Trim. IV

1268 EN ISO 7488:2018 Dentistry - Mixing machines for dental amalgam (ISO 7488:2018) Trim. IV1269 EN ISO 7492:2018 Dentistry - Dental explorer (ISO 7492:2018) Trim. IV

1270EN ISO 7500-1:2018

Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018) Trim. IV

1271 EN ISO 7599:2018Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018) Trim. IV

1272EN ISO 7668:2018

Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees (ISO 7668:2018) Trim. IV

1273EN ISO 7711-1:1998/A1:2009

Dental rotary instruments. Diamond instruments. Part 1: Dimensions, requirements, marking and packaging. Amendment 1 (ISO 7711-1:1998/Amd 1:2009) Trim. IV

1274 EN ISO 7886-1:2018Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO/FDIS 7886-1:2016) Trim. IV

1275 EN ISO 8028:2018Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017) Trim. IV

1276EN ISO 80601-2-55:2018

Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018) Trim. IV

1277 EN ISO 8099-1:2018 Small craft - Waste systems - Part 1: Waste water retention (ISO 8099-1:2018) Trim. IV

1278 EN ISO 811:2018Textiles - Determination of resistance to water penetration - Hydrostatic pressure test (ISO 811:2018) Trim. IV

1279 EN ISO 8385:2018 Ships and marine technology - Dredgers - Classification (ISO 8385:2018) Trim. IV

1280 EN ISO 8442-9:2018Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 9: Requirements for ceramic knives (ISO 8442-9:2018) Trim. IV

1281EN ISO 8536-14:2018

Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact (ISO 8536-14:2016) Trim. IV

1282 EN ISO 8596:2018Ophthalmic optics - Visual acuity testing -- Standard and clinical optotypes and their presentation (ISO 8596:2017) Trim. IV

1283 EN ISO 8654:2018Jewellery - Colours of gold alloys - Definition, range of colours and designation (ISO 8654:2018) Trim. IV

1284 EN ISO 877-3:2018Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2018) Trim. IV

1285 EN ISO 888:2018 Fasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012) Trim. IV

1286 EN ISO 898-3:2018Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018) Trim. IV

1287 EN ISO 9004:2018Quality management - Quality of an organization - Guidance to achieve sustained success (ISO 9004:2018) Trim. IV

1288 EN ISO 9017:2018 Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2017) Trim. IV

1289EN ISO 9233-1:2018

Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 1: Molecular absorption spectrometric method for cheese rind (ISO 9233-1:2018) Trim. IV

1290EN ISO 9233-2:2018

Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 2: High-performance liquid chromatographic method for cheese, cheese rind and processed cheese (ISO 9233-2:2018) Trim. IV

1291 EN ISO 9241-11:2018Ergonomics of human-system interaction - Part 11: Usability: Definitions and concepts (ISO 9241-11:2018) Trim. IV

1292 EN ISO 945-1:2018Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2017) Trim. IV

1293 EN ISO 9687:2015/A1:2018 Dentistry - Graphical symbols for dental equipment (ISO 9687:2015/Amd 1:2018) Trim. IV

1294

EN ISO/IEC 15426-2:2006/AC:2011Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specification. Part 2: Twodimensional symbols. Technical Corrigendum 1 (ISO/IEC 15426-2:2005/Cor 1:2008) Trim. IV

1295 EN ISO/IEC 80079-38:2016/A1:2018Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) Trim. IV

1296

ETSI EN 300 674-2-2 V2.1.1 (2016-11)

Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHz to 5 815 MHz frequency band; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Sub-part 2: On-Board Units (OBU) Trim. IV

1297

ETSI EN 300 698 V2.2.1 (2017-10)Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU Trim. IV

1298 ETSI EN 300 718-2 V2.1.1 (2018-01)Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; -- Part 2: Harmonised Standard for features for emergency services Trim. IV

1299

ETSI EN 302 054 V2.1.1 (2017-10)Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU Trim. IV

1300

ETSI EN 302 054 V2.2.1 (2018-02)Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU Trim. IV

1301ETSI EN 302 454 V2.1.1 (2017-10)

Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU Trim. IV

1302

ETSI EN 303 276 V1.1.1 (2017-11)

Maritime Broadband Radiolink operating within the bands 5 852 MHz to 5 872 MHz and/or 5 880 MHz to 5 900 MHz for ships and off-shore installations engaged in coordinated activities; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU Trim. IV

1303

ETSI EN 303 413 V1.1.1 (2017-06)

Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU Trim. IV

1304 HD 123.4 S1:1977 Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides Trim. IV

1305 HD 123.7 S1:1977 Hollow metallic waveguides - Part 7: Relevant specifications for square waveguides Trim. IV

1306 HD 129.3 S2:1983Flanges for waveguides - Part 3: Relevant specifications for flanges for flat rectangular waveguides Trim. IV

1307 HD 134.3 S1:1977 Radio-frequency connectors - Part 3: Two pin connector for twin balanced aerial feeders Trim. IV

1308 HD 311.6 S1:1987 Magnetic tape sound recording and reproducing systems - Part 6: Reel-to-reel systems Trim. IV1309 HD 361 S3:1999/corrigendum Jun. 1999System for cable designation Trim. IV

1310 HD 416.3.1 S1:1988Specification for vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets Trim. IV

1311 HD 429 S1:1983Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials Trim. IV

1312 HD 450.3 S1:1984 Hearing aids - Part 3: Hearing aid equipment not entirely worn on the listener Trim. IV1313 HD 450.5 S1:1985 Hearing aids - Part 5: Nipples for insert earphones Trim. IV

1314HD 477.2.2 S1:1987

Methods of measurement of equipment used in terrestrial radio-relay systems - Part 2: Measurements for sub-systems - Section 2: Stand-by channel switching equipment Trim. IV

1315 HD 477.3 S1:1988Methods of measurement for equipment used in terrestrial radio-relay systems - Part 3: Simulated systems Trim. IV

1316 HD 478.2.5 S1:1993Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 5: Dust, sand, salt mist Trim. IV

1317HD 489 S1:1987

Recommended dimensions for hexagonal and square crimping-die cavities, identors, gauges, outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors Trim. IV

1318 HD 543.2 S1:1995Performance and testing of teleprotection equipment of power systems - Part 2: Analogue comparison systems Trim. IV

1319 HD 576 S1:1990 IEC 60822 VSB - Parallel sub-system Bus of the IEC 60821 VMEbus Trim. IV

1320 HD 60364-4-41:2007/A11:2017Low-voltage Electrical Installations - Part 4-41: Protection For Safety - Protection Against Electric Shock from SAI Trim. IV

1321 HD 60364-4-41:2007/corrigendum Jul. Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock Trim. IV

1322 HD 60364-5-52:2011/A11:2017Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems Trim. IV

1323HD 60364-5-551:2010/corrigendum De

Low-voltage electrical installations - Part 5-55: Selection and erection of electrical equipment - Other equipment - Clause 551: Low-voltage generating sets Trim. IV

1324 HD 60364-6:2016/AC:2017 Low-voltage electrical installations - Part 6: Verification (IEC 60364-6:2016/COR1:2017) Trim. IV

1325HD 60364-7-704:2018

Low voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations Trim. IV

1326 ISO 10377:2013 Consumer product safety. Guidelines for suppliers Trim. IV

1327 ISO 10381-4:2003Soil quality. Sampling: Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites Trim. IV

1328ISO 10381-5:2005

Soil quality. Sampling. Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination Trim. IV

1329 ISO 10381-8:2006 Soil quality. Sampling. Part 8: Guidance on sampling of stockpiles Trim. IV

1330 ISO 10460:2018Gas cylinders — Welded aluminium-alloy, carbon and stainless steel gas cylinders — Periodic inspection and testing Trim. IV

1331 ISO 10494:2018Turbines and turbine sets — Measurement of emitted airborne noise — Engineering/survey method Trim. IV

1332 ISO 10691:2004Gas cylinders. Refillable welded steel cylinders for liquified petroleum gas (LPG). Procedures for checking before, during and after filling Trim. IV

1333 ISO 10802:1992 Ductile iron pipelines — Hydrostatic testing after installation Trim. IV1334 ISO 10845-1:2010 Construction procurement. Part 1: Processes, methods and procedures Trim. IV

1335 ISO 11003-2:2001Adhesives. Determination of shear behaviour of structural adhesives. Part 2: Tensile test methods using thick adherends. Trim. IV

1336 ISO 11042-1:1996 Турбины газовые. Выбросы отработавшего газа. Часть 1. Измерение и оценка Trim. IV

1337 ISO 11042-2:1996Турбины газовые. Выбросы отработавшего газа. Часть 2. Автоматизированный мониторинг выбросов Trim. IV

1338ISO 11119-1:2012

Gas cylinders. Refillable composite gas cylinders and tubes. Design, construction and testing. Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l Trim. IV

1339ISO 11119-2:2012

Gas cylinders. Refillable composite gas cylinders and tubes. Design, construction and testing. Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners Trim. IV

1340

ISO 11119-2:2012/Amd 1:2014Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners Trim. IV

1341ISO 11119-3:2013

Gas cylinders. Refillable composite gas cylinders and tubes Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners Trim. IV

1342ISO 11513:2011

Gas cylinders. Refillable welded steel cylinders containing materials for subatmospheric gas packaging (excluding acetylene). Design, construction, testing, use and periodic inspection Trim. IV

1343 ISO 11515:2013Gas cylinders. Refillable composite reinforced tubes of water capacity between 450 L and 3000 L. Design, construction and testing Trim. IV

1344 ISO 11515:2013/Amd 1:2018Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing Trim. IV

1345 ISO 11565:2006/Cor 1:2007 Road vehicles -- Spark-plugs -- Test methods and requirements Trim. IV1346 ISO 11625:2007 Gas cylinders. Safe handling. Trim. IV

1347 ISO 11755:2005Gas cylinders. Cylinder bundles for compressed and liquefied gases (excluding acetylene). Inspection at time of filling Trim. IV

1348 ISO 11898-1:2015 Road vehicles. Controller area network (CAN). Part 1: Data link layer and physical signalling Trim. IV

1349 ISO 11898-2:2016 Road vehicles. Controller area network (CAN). Part 2: High-speed medium access unit Trim. IV

1350 ISO 11898-3:2006Road vehicles. Controller area network (CAN). Part 3: Low-speed, fault-tolerant, medium-dependent interface Trim. IV

1351 ISO 11898-3:2006/Cor 1:2006Road vehicles -- Controller area network (CAN) -- Part 3: Low-speed, fault-tolerant, medium-dependent interface Trim. IV

1352 ISO 11898-4:2004 Road vehicles. Controller area network (CAN). Part4: Time-triggered communication Trim. IV1353 ISO 11949:2016 Cold-reduced tinmill products. Electrolytic tinplate Trim. IV

1354 ISO 11950:2016 Cold-reduced tinmill products. Electrolytic chromium/chromium oxide-coated steel Trim. IV1355 ISO 11951:2016 Cold-reduced tinmill products. Blackplate Trim. IV

1356 ISO 12006-2:2015 Building construction — Organization of information about construction works Trim. IV1357 ISO 12097-3:2002 Road vehicles. Airbag components. Part 3: Testing of inflator assemblies. Trim. IV

1358 ISO 12176-1:2017Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion Trim. IV

1359 ISO 12494:2017 Atmospheric icing of structures Trim. IV1360 ISO 13810:2015 Tourism services. Industrial tourism. Service provision Trim. IV

1361ISO 14572:2011

Road vehicles. Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables. Test methods and requirements for basic- and high-performance cables Trim. IV

1362 ISO 14617-3:2002 Graphical symbols for diagrams. Part 3: Connections and related devices. Trim. IV

1363

ISO 14641:2018Electronic document management. Design and operation of an information system for the preservation of electronic documents. Specifications

Trim. IV

1364 ISO 14785:2014 Tourist information offices. Tourist information and reception services .Requirements. Trim. IV

1365 ISO 15663-2:2001Petroleum and natural gas industries. Life-cycle costing. Part 2: Guidance on application of methodology and calculation methods Trim. IV

1366 ISO 16134:2006 Earthquake-and subsidence-resistant design of ductile iron pipelines Trim. IV

1367 ISO 16362:2005Ambient air. Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chromatography Trim. IV

1368 ISO 16439:2014Information and documentation. Methods and procedures for assessing the impact of libraries. Trim. IV

1369 ISO 16750-4:2010Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 4: Climatic loads Trim. IV

1370ISO 16750-5:2010

Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 5: Chemical loads Trim. IV

1371 ISO 16958:2015Milk, milk products, infant formula and adult nutritionals. Determination of fatty acids composition. Capillary gas chromatographic method Trim. IV

1372 ISO 17089-1:2010Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement Trim. IV

1373 ISO 17089-2:2012Measurement of fluid flow in closed conduits. Ultrasonic meters for gas. Part 2: Meters for industrial applications Trim. IV

1374 ISO 17090-2:2015 Health informatics. Public key infrastructure. Part 2: Certificate profile Trim. IV1375 ISO 17117-1:2018 Health informatics — Terminological resources Trim. IV

1376ISO 17447-1:2015

Road Vehicles. Glow-plugs with conical seating and their cylinder head housing. Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs Trim. IV

1377ISO 17447-2:2015

Road Vehicles. Glow-plugs with conical seating and their cylinder head housing. Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs Trim. IV

1378 ISO 17447-3:2015Road Vehicles. Glow-plugs with conical seating and their cylinder head housing. Part 3: Tests and requirements Trim. IV

1379 ISO 1750:1981 Pesticides and other agrochemicals. Common names. Trim. IV1380 ISO 1750:1981/Add 1:1983 Pesticides and other agrochemicals -- Common names Trim. IV1381 ISO 1750:1981/Add 2:1983 Pesticides and other agrochemicals -- Common names Trim. IV

1382 ISO 1750:1981/Amd 1:1982 Pesticides and other agrochemicals -- Common names Trim. IV1383 ISO 1750:1981/Amd 2:1999 Pesticides and other agrochemicals -- Common names Trim. IV1384 ISO 1750:1981/Amd 3:2001 Pesticides and other agrochemicals -- Common names Trim. IV1385 ISO 1750:1981/Amd 4:2008 Pesticides and other agrochemicals -- Common names Trim. IV1386 ISO 1750:1981/Amd 5:2008 Pesticides and other agrochemicals -- Common names Trim. IV1387 ISO 1750:1981/Amd 6:2018 Pesticides and other agrochemicals -- Common names Trim. IV

1388ISO 17772-1:2017

Energy performance of buildings — Indoor environmental quality — Part 1: Indoor environmental input parameters for the design and assessment of energy performance of buildings Trim. IV

1389 ISO 17775:2006 Aircraft. Ground-service connections. Potable water, toilet-flush water and toilet drain Trim. IV

1390 ISO 18119:2018Gas cylinders — Seamless steel and seamless aluminium-alloy gas cylinders and tubes — Periodic inspection and testing Trim. IV

1391 ISO 18172-1:2007Gas cylinders. Refillable welded stainless steel cylinders. Part 1: Test pressure 6 MPa and below Trim. IV

1392 ISO 18287:2006Soil quality. Determination of polycyclic aromatic hydrocarbons (PAH). Gas chromatographic method with mass spectrometric detection (GC-MS) Trim. IV

1393 ISO 18400-101:2017Soil quality. Sampling. Part 101: Framework for the preparation and application of a sampling plan Trim. IV

1394 ISO 18400-102:2017 Soil quality. Sampling. Part 102: Selection and application of sampling techniques Trim. IV

1395 ISO 18400-105:2017 Soil quality. Sampling. Part 105: Packaging, transport, storage and preservation of samples Trim. IV1396 ISO 18400-107:2017 Soil quality. Sampling. Part 107: Recording and reporting Trim. IV

1397

ISO 19078:2013Gas cylinders. Inspection of the cylinder installation, and requalification of high pressurecylinders for the on-board storage of natural gas as a fuel for automotive vehicles

Trim. IV1398 ISO 19101-2:2018 Geographic information — Reference model Trim. IV1399 ISO 1920-3:2004 Testing of concrete. Part 3: Making and curing test specimens Trim. IV

1400 ISO 1924-3:2005Paper and board. Determination of tensile properties. Part 3: Constant rate of elongation method (100 mm/min) Trim. IV

1401 ISO 20022-1:2013 Financial services. Universal financial industry message scheme. Part 1: Metamodel Trim. IV1402 ISO 20022-2:2013 Financial services — Universal financial industry message scheme Trim. IV1403 ISO 20022-3:2013 Financial services — Universal financial industry message scheme Trim. IV

1404 ISO 20022-4:2013Financial services - Universal financial industry message scheme - Part 4: XML Schema generation Trim. IV

1405 ISO 20022-5:2013 Financial services — Universal financial industry message scheme Trim. IV1406 ISO 20022-6:2013 Financial services — Universal financial industry message scheme Trim. IV1407 ISO 20245:2017 Cross-border trade of second-hand goods Trim. IV

1408 ISO 20252:2012 Market, opinion and social research. Vocabulary and service requirements Trim. IV1409 ISO 20700:2017 Guidelines for management consultancy services Trim. IV

1410 ISO 20703:2006 Gas cylinders. Refillable welded aluminium-alloy cylinders. Design, construction and testing Trim. IV1411 ISO 21014:2006 Cryogenic vessels. Cryogenic insulation performance Trim. IV

1412 ISO 21029-1:2018Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume Trim. IV

1413 ISO 2137:2007Pulps. Estimation of dirt and shives. Part 3: Visual inspection by reflected light using. Equivalent Black Area (EBA) method. Trim. IV

1414 ISO 21501-4:2018 Determination of particle size distribution — Single particle light interaction methods Trim. IV

1415ISO 22004:2014

Food safety management systems. Guidance on the application of ISO 22000

Trim. IV

1416 ISO 22222:2005 Personal financial planning. Requirements for personal financial planners Trim. IV

1417 ISO 22310:2006Information and documentation. Guidelines for standards drafters for stating records management requirements in standards Trim. IV

1418 ISO 2294:1974Мясо и мясные продукты. Определение общего содержания фосфора (контрольный метод) Trim. IV

1419 ISO 23081-1:2017Information and documentation — Records management processes — Metadata for records — Part 1: Principles Trim. IV

1420 ISO 2314:2009 Gas turbines. Acceptance tests Trim. IV

1421 ISO 2531:2009 Ductile iron pipes, fittings, accessories and their joints for water applications Trim. IV

1422 ISO 2531:2009/Cor 1:2010 Ductile iron pipes, fittings, accessories and their joints for water applications Trim. IV

1423ISO 25981:2008

Road vehicles. Connectors for the electrical connection of towing and towed vehicles. Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage. Trim. IV

1424ISO 25981:2008/Cor 1:2008

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage Trim. IV

1425 ISO 28590:2017Sampling procedures for inspection by attributes — Introduction to the ISO 2859 series of standards for sampling for inspection by attributes Trim. IV

1426 ISO 3036:1975 Board -- Determination of puncture resistance Trim. IV

1427 ISO 3054:2017Essential oil of lavandin Abrial (Lavandula angustifolia Mill. × Lavandula latifolia Medik.), French type Trim. IV

1428 ISO 31000:2018 Risk management — Guidelines SM ISO 31000:2012 Trim. IV1429 ISO 3103:1980 Tea -- Preparation of liquor for use in sensory tests Trim. IV

1430 ISO 3129:2012Wood. Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens Trim. IV

1431 ISO 3136:1983 Rubber latex -- Styrene-butadiene -- Determination of bound styrene content Trim. IV

1432 ISO 3545-1:1989Steel tubes and fittings -- Symbols for use in specifications -- Part 1: Tubes and tubular accessories with circular cross-section Trim. IV

1433 ISO 3573:2012 Hot-rolled carbon steel sheet of commercial and drawing qualities Trim. IV

1434 ISO 3574:2012 Cold-reduced carbon steel sheet of commercial and drawing qualities Trim. IV

1435 ISO 36:2017 Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics Trim. IV

1436 ISO 3733:1999 Petroleum products and bituminous materials. Determination of water. Distillation method. Trim. IV1437 ISO 3977-1:1997 Gas turbines. Procurement. Part 1: General introduction and definitions. Trim. IV

1438 ISO 3977-2:1997 Gas turbines. Procurement. Part 2: Standard reference conditions and ratings. Trim. IV

1439 ISO 3977-9:1999 Gas turbines. Procurement. Part 9: Reliability, availability, maintainability and safety. Trim. IV1440 ISO 4217:2015 Codes for the representation of currencies Trim. IV

1441 ISO 4224:2000Ambient air. Determination of carbon monoxide. Non-destructive infrared spectrometry method. Trim. IV

1442 ISO 4427-5:2007Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Part 5: Fitness for purpose of the system. Trim. IV

1443 ISO 4437-4:2015 Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE). Part 4: Valves Trim. IV

1444 ISO 45001:2018Occupational health and safety management systems — Requirements with guidance for use Trim. IV

1445 ISO 4531-1:1998Vitreous and porcelain enamels. Release of lead and cadmium from enamelled ware in contact with food. Part 1: Method of test Trim. IV

1446 ISO 4531-2:1998Vitreous and porcelain enamels. Release of lead and cadmium from enamelled ware in contact with food. Part 2: Permissible limits Trim. IV

1447 ISO 4578:1997Adhesives. Determination of peel resistance of high-strength adhesive bonds. Floating-rolled method. Trim. IV

1448ISO 4582:2017

Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources Trim. IV

1449 ISO 4587:2003 Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies. Trim. IV

1450 ISO 4706:2008 Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below Trim. IV

1451 ISO 4892-4:2013Plastics. Methods of exposure to laboratory light sources. Part 4: Open-flame carbon-arc lamps Trim. IV

1452 ISO 50004:2014Energy management systems -- Guidance for the implementation, maintenance and improvement of an energy management system Trim. IV

1454 ISO 559:1991 Трубы стальные сварные или бесшовные для воды, сточных вод и газа Trim. IV

1455 ISO 6133:2015Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength Trim. IV

1456 ISO 6310:2009 Road vehicles. Brake linings. Compressive strain test methods Trim. IV

1457 ISO 6488:2004 Tobacco and tobacco products. Determination of water content. Karl Fischer method. Trim. IV

1458 ISO 6488:2004/Cor 1:2008 Tobacco and tobacco products. Determination of water content. Karl Fischer method Trim. IV

1459 ISO 6722-1:2011Road vehicles. 60 V and 600 V single-core cables. Part 1: Dimensions, test methods and requirements for copper conductor cable Trim. IV

1460 ISO 6722-1:2011/Cor 1:2012Road vehicles -- 60 V and 600 V single-core cables -- Part 1: Dimensions, test methods and requirements for copper conductor cables Trim. IV

1461 ISO 6722-2:2013Road vehicles. 60 V and 600 V single-core cables. Part 2: Dimensions, test methods and requirements for aluminium conductor cables Trim. IV

1462 ISO 6780:2003 Flat pallets for intercontinental materials handling. Principal dimensions and tolerances. Trim. IV1463 ISO 7195:2005 Nuclear energy. Packaging of uranium hexafluoride (UF6) for transport Trim. IV

1464 ISO 7270-1:2003Rubber. Analysis by pyrolytic gas-chromatographic methods. Part 1: Identification of polymers (single polymers and polymer blends). Trim. IV

1465ISO 7270-1:2003/Amd 1:2010

Rubber. Analysis by pyrolytic gaschromatographic methods. Part 1: Identification of polymers (single polymers and polymer blends) AMENDMENT 1 Trim. IV

1466 ISO 7638-1:2018 Road vehicles — Connectors for the electrical connection of towing and towed vehicles Trim. IV

1467 ISO 7638-2:2018 Road vehicles — Connectors for the electrical connection of towing and towed vehicles Trim. IV1468 ISO 7941:1988 Commercial propane and butane. Analysis by gas chromatography Trim. IV1469 ISO 80000-7:2008 Quantities and units. Part 7: Light Trim. IV

1470ISO 8178-4:2017

Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications Trim. IV

1471 ISO 8178-6:2018 Reciprocating internal combustion engines — Exhaust emission measurement Trim. IV

1472

ISO 8178-9:2012Reciprocating internal combustion engines. Exhaust emission measurement. Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions Trim. IV

1473 ISO 8391-1:1986Ceramic cookware in contact with food. Release of lead and cadmium. Part 1: Method of test Trim. IV

1474 ISO 8391-2:1986Ceramic cookware in contact with food. Release of lead and cadmium. Part 2: Permissible limits Trim. IV

1475 ISO 8478:2017 Optics and photonics — Camera lenses — Measurement of ISO spectral transmittance SM ISO 8478:2017 Trim. IV

1476ISO 91:2017

Petroleum and related products — Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions Trim. IV

1477 ISO 9162:2013 Petroleum products. Fuels (classF). Liquefied petroleum gases. Specifications Trim. IV

1478 ISO 9230:2007Information and documentation. Determination of price indexes for print and electronic media purchased by libraries Trim. IV

1479ISO 9707:2008

Information and documentation. Statistics on the production and distribution of books, newspapers, periodicals and electronic publications Trim. IV

1480ISO 9809-4:2014

Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa Trim. IV

1481 ISO GUIDE 31:2015 Reference materials. Contents of certificates, labels and accompanying documentation Trim. IV

1482 ISO GUIDE 35:2017Reference materials — Guidance for characterization and assessment of homogeneity and stability Trim. IV

1483 ISO/IEC 10116:2017Information technology — Security techniques — Modes of operation for an n-bit block cipher Trim. IV

1484 ISO/IEC 10373-6:2016/Amd 3:2018 PICC loading effect Trim. IV1485 ISO/IEC 11179-1:2015 Information technology. Metadata registries (MDR). Part 1: Framework Trim. IV1486 ISO/IEC 11179-2:2005 Information technology. Metadata registries (MDR). Part 2: Classification Trim. IV

1487 ISO/IEC 11179-3:2013Information technology. Metadata registries (MDR). Part 3: Registry metamodel and basic attributes Trim. IV

1488 ISO/IEC 11179-4:2004Information technology -- Metadata registries (MDR) -- Part 4: Formulation of data definitions Trim. IV

1489 ISO/IEC 11179-5:2015 Information technology. Metadata registries (MDR). Part 5: Naming principles Trim. IV1490 ISO/IEC 11179-6:2015 Information technology. Metadata registries (MDR). Part 6: Registration Trim. IV

1491 ISO/IEC 11693-3:2015 Identification cards. Optical memory cards. Part 3: Authentication techniques Trim. IV

1492 ISO/IEC 11770-3:2015Information technology. Security techniques. Key management. Part 3: Mechanisms using asymmetric techniques Trim. IV

1493 ISO/IEC 11770-3:2015/Amd 1:2017 Blinded Diffie-Hellman key agreement Trim. IV

1494 ISO/IEC 11770-3:2015/Cor 1:2016Information technology -- Security techniques -- Key management -- Part 3: Mechanisms using asymmetric techniques Trim. IV

1495 ISO/IEC 11770-4:2017Information technology — Security techniques — Key management — Part 4: Mechanisms based on weak secrets Trim. IV

1496 ISO/IEC 14443-1:2018 Cards and security devices for personal identification — Contactless proximity objects Trim. IV

1497 ISO/IEC 14443-3:2018 Cards and security devices for personal identification — Contactless proximity objects Trim. IV

1498 ISO/IEC 14443-4:2018 Cards and security devices for personal identification — Contactless proximity objects Trim. IV

1499 ISO/IEC 14888-3:2016Information technology. Security techniques. Digital signatures with appendix. Part 3: Discrete logarithm based mechanisms Trim. IV

1500 ISO/IEC 15444-1:2016 Information technology. JPEG 2000 image coding system: Core coding system SM ISO/CEI 15444-1:2014 Trim. IV

1501 ISO/IEC 15693-1:2018Cards and security devices for personal identification - Contactless vicinity objects - Part 1: Physical characteristics Trim. IV

1502 ISO/IEC 15946-1:2016Information technology. Security techniques. Cryptographic techniques based on elliptic curves. Part 1: General Trim. IV

1503 ISO/IEC 15946-5:2017Information technology — Security techniques — Cryptographic techniques based on elliptic curves — Part 5: Elliptic curve generation Trim. IV

1504ISO/IEC 17021-2:2016

Conformity assessment. Requirements for bodies providing audit and certification of management systems. Part 2: Competence requirements for auditing and certification of environmental management systems Trim. IV

1505 ISO/IEC 18013-1:2018 Information technology — Personal identification — ISO-compliant driving licence Trim. IV

1506ISO/IEC 18745-1:2018

Test methods for machine readable travel documents (MRTD) and associated devices - Part 1: Physical test methods for passport books (durability) Trim. IV

1507 ISO/IEC 19286:2018 Identification cards — Integrated circuit cards — Privacy-enhancing protocols and services Trim. IV1508 ISO/IEC 20027:2018 Information technology — Guidelines for slap tenprint fingerprintture Trim. IV

1509 ISO/IEC 24759:2017Information technology — Security techniques — Test requirements for cryptographic modules Trim. IV

1510 ISO/IEC 24789-2:2011 Identification cards. Card service life. Part 2: Methods of evaluation Trim. IV

1511 ISO/IEC 27005:2018 Information technology - Security techniques - Information security risk management Trim. IV

1512ISO/IEC 29109-5:2014

Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Part 5: Face image data. Trim. IV

1513 ISO/IEC 7811-1:2018 Identification cards - Recording technique - Part 1: Embossing Trim. IV

1514 ISO/IEC 7816-11:2017Identification cards — Integrated circuit cards — Part 11: Personal verification through biometric methods

SM ISO/CEI 7816-11:2004 Trim. IV

1515 ISO/IEC 7816-15:2016 Identification cards. Integrated circuit cards. Part 15: Cryptographic information application Trim. IV

1516 ISO/IEC 7816-15:2016/Amd 1:2018Identification cards -- Integrated circuit cards -- Part 15: Cryptographic information application -- Amendment 1 Trim. IV

1517 ISO/IEC 7816-4:2013/Amd 1:2018 Multiple record handling Trim. IV1518 ISO/IEC 7816-4:2013/Amd 2:2018 Waiting time management Trim. IV

1519 ISO/IEC 7816-9:2017 Identification cards — Integrated circuit cards — Part 9: Commands for card management SM ISO/CEI 7816-9:2014Trim. IV

1520 ISO/IEC 8824-1:2015Information technology. Abstract Syntax Notation One (ASN.1): Specification of basic notation Trim. IV

1521 ISO/IEC 8824-1:2015/Cor 1:2017Information technology -- Abstract Syntax Notation One (ASN.1): Specification of basic notation Trim. IV

1522 ISO/IEC 8824-2:2015Information technolog. Abstract Syntax Notation One (ASN.1): Information object specification Trim. IV

1523 ISO/IEC 8824-3:2015 Information technology. Abstract Syntax Notation One (ASN.1): Constraint specification Trim. IV

1524 ISO/IEC 8824-3:2015/Cor 1:2018Information technology -- Abstract Syntax Notation One (ASN.1): Constraint specification -- Part 3: -- Technical Corrigendum 1 Trim. IV

1525 ISO/IEC 8824-4:2015Information technology. Abstract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications Trim. IV

1526ISO/IEC 8825-1:2015

Information technology. ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) Trim. IV

1527 ISO/IEC 8825-2:2015 Information technology. ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) Trim. IV

1528 ISO/IEC 8825-2:2015/Cor 1:2017Information technology -- ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) Trim. IV

1529 ISO/IEC 8825-3:2015Information technology. ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) Trim. IV

1530 ISO/IEC 8825-4:2015 Information technology. ASN.1 encoding rules: XML Encoding Rules (XER) Trim. IV

1531 ISO/IEC 8825-4:2015/Cor 1:2018Information technology -- ASN.1 encoding rules: XML Encoding Rules (XER) -- Part 4: -- Technical Corrigendum 1 Trim. IV

1532 ISO/IEC 8825-5:2015Information technology. ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 Trim. IV

1533 ISO/IEC 8825-6:2015Information technology. ASN.1 encoding rules: Registration and application of PER encoding instructions Trim. IV

1534 ISO/IEC 8825-7:2015 Information technology. ASN.1 encoding rules: Specification of Octet Encoding Rules (OER) Trim. IV

1535 ISO/IEC 8825-7:2015/Cor 2:2017Information technology -- ASN.1 encoding rules -- Part 7: Specification of Octet Encoding Rules (OER) Trim. IV

1536 ISO/IEC TR 24741:2018 Information technology — Biometrics — Overview and application Trim. IV

1537 ISO/IEC TS 25011:2017Information technology - Systems and software quality requirements and evaluation (SQuaRE) - Service quality models Trim. IV

1538EN 61951-2:2017

Secondary cells and batteries containing alkaline or other non acid electrolytes. Secondary sealed cells and batteries for portable applications. Part 2: Nickel-metal hydride Trim. IV

1539 EN 2:1992/A1:2004 Classification of fires Trim. IV

1540EN 55014-2:1997/A2:2008

Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part 2: Immunity. Product family standard Trim. IV

1541 EN 50121-1:2006/AC:2008 Railway applications. Electromagnetic compatibility. Part 1: General Trim. IV

1542 EN 50121-2:2006/AC:2008Railway applications. Electromagnetic compatibility. Part 2: Emission of the whole railway system to the outside world Trim. IV

1543 EN 50121-3-1:2006/AC:2008Railway applications. Electromagnetic compatibility. Part 3-1: Rolling stock. Train and complete vehicle Trim. IV

1544 EN 50121-3-2:2006/AC:2008 Railway applications. Electromagnetic compatibility. Part 3-2: Rolling stock. Apparatus Trim. IV

1545 EN 50121-4:2006/AC:2008Railway applications. Electromagnetic compatibility. Part 4: Emission and immunity of the signalling and telecommunications apparatus Trim. IV

1546 EN 50121-5:2006/AC:2008Railway applications. Electromagnetic compatibility. Part 5: Emission and immunity of fixed power supply installations and apparatus Trim. IV

1547EN 55014-2:1997/AC:1997

Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Part 2: Immunity. Product family standard Trim. IV

1548EN 353-1:2014+A1:2017

Personal fall protection equipment. Guided type fall arresters including an anchor line. Part 1: Guided type fall arresters including a rigid anchor line Trim. IV

1549 ISO 1740:2004 Milkfat products and butter. Determination of fat acidity (Reference method) Trim. IV

1550 ISO 2911:2004 Sweetened condensed milk. Determination of sucrose content. Polarimetric method Trim. IV

1551 ISO 3889:2006 Milk and milk products. Specification of Mojonnier-type fat extraction flasks Trim. IV

1552 ISO 5538:2004 Milk and milk products. Sampling. Inspection by attributes Trim. IV

1553 ISO 5543:2004Caseins and caseinates. Determination of fat content. Gravimetric method (Reference method) Trim. IV

1554 ISO 8851-1:2004 Butter. Determination of moisture, non-fat solids and fat contents (Routine methods). Part 1: Determination of moisture content Trim. IV

1555 ISO 8851-2:2004Butter. Determination of moisture, non-fat solids and fat contents (Routine methods). Part 2: Determination of non-fat solids content Trim. IV

1556 ISO 8851-3:2004Butter. Determination of moisture, non-fat solids and fat contents (Routine methods). Part 3: Calculation of fat content Trim. IV

1557 ISO 15648:2004 Butter. Determination of salt content. Potentiometric method Trim. IV

1558 ISO 15663-3:2001 Petroleum and natural gas industries. Life-cycle costing. Part 3: Implementation guidelines Trim. IV

1559 EN 60730-1:1995/A15:1998 Automatic electrical controls for household and similar use. Part 1: General requirements Trim. IV

1560EN 60127-3:1996/corrigendum Jun. 1996

Miniature fuses. Part 3: Sub-miniature fuse-links Trim. IV

1561 CEN/TS 16931-3-2:2017/AC:2018Electronic invoicing. Part 3-2: Syntax binding for ISO/IEC 19845 (UBL 2.1) invoice and credit note20.09.2018 Trim. IV