1weaver intro to triz innovation tool: scamper jonathan weaver udm me department development support...
TRANSCRIPT
1Weaver Intro to Triz
Innovation Tool: SCAMPER
Jonathan WeaverUDM ME Department
Development support by James Hadley
2Weaver Intro to Triz
References
• The Innovator’s Toolkit, Silverstein, Samuel, & DeCarlo, John Wiley & Sons, 2009, ISBN 978-0470-34535-1
• Thinkertoys, 2nd Edition, Michael Michalko, Ten Speed Press, 2006, ISBN 1-58008-773-6
• For more common questions to use in SCAMPER go to: http://litemind.com/scamper/
3Weaver Intro to Triz
Introduction
• SCAMPER is a design idea generation process• Uses structured questions as a guide• Good for solving new problems• Or to create incremental change to existing products• Ideas generated in each area don’t have to answer specific
questions• The following slides define and illustrate the three step
process
4Weaver Intro to Triz
Step 1: Examine the Problem
• Clearly define the problem– Main issues– Functional requirements– Resources available
• Define the current solutions to the problem– Present products– Present processes
5Weaver Intro to Triz
Step 2: SCAMPER Question Areas
• S - Substitute• C - Combine• A - Adapt• M – Modify / Magnify / Minify• P - Put to another use • E - Eliminate• R – Reverse / Rearrange
Let’s take a closer look at each of these…
6Weaver Intro to Triz
Substitute
• What part of the product/process can be substituted?• Alternatives can spark ideas• Common Questions:
– What can be substituted to make an improvement? – What happens if this is swapped for that?– Is it possible to substitute the place, time, materials or
people?
7Weaver Intro to Triz
Substitute Example
• Rod Sprules created a new fireplace log that substitutes treated wood, with used coffee grounds and compressed candle wax, for a clean burning and high energy fire fuel
http://www.java-log.com/pdf/Hearth_Home_September_04.pdf
8Weaver Intro to Triz
Combine
• What parts of the problem can be combined?• Combination of areas can form new products• Synergistic solutions can allow compact design• Common Questions:
– What materials, features, processes, people, products or components can be combined?
– Where can synergies be obtained?
9Weaver Intro to Triz
Combine Example
• Aron Losonczi, a Hungarian architect, combines cement and fiber optics to create a cement that appears transparent because of how the fiber optics filter light through the cement
http://www.fansofrealitytv.com/forums/general-discussion/38724-inventions-year-2.html
10Weaver Intro to Triz
Adapt
• What parts can be adapted to remove the problem?• Often the nature of the problem can be changed by
redesign of the parts• Common Questions:
– What part of the product can be changed? – In exchange for what? – What if the key characteristics of a component are
altered?
11Weaver Intro to Triz
Adapt Example
• After watching Spiderman, researchers at the University of Manchester decided they would like to make an adhesive to allow people to climb walls
• They found that they could imitate how geckos use hairs on their paws to climb, by creating gloves with polypropylene fibers
www.cegep-lanaudiere.qc.ca/lass/anglais/step/Spiderman%20gloves.doc
12Weaver Intro to Triz
Modify
• Look at distorting part or all of the solution in an uncommon way
• This forces formation of new ways to approach present solutions
• Common Questions:– Can a feature or component be warped or exaggerated? – Can the current process be modified?
13Weaver Intro to Triz
Modify Example
• Cirque du Soleil modified the essence of what a circus is by modernizing it and changing focus to the performance side
http://www.cirquedusoleil.com/lanouba/en/about/acts.asp
14Weaver Intro to Triz
Magnify / Minify
• Look at enlarging or shrinking a part or the full product• This causes you to view if changing component sizes
could add to the solution• Common Questions:
– Can a feature or component be expanded or shrunk? – Can the process be shortened or lengthened in some
way?
15Weaver Intro to Triz
Magnify Example
• A & B Hydroponics was the first company to have vertically rotating hydroponic systems, allow for more plants in the same amount of floor space
http://www.abhydroponics.com.au/7.html
16Weaver Intro to Triz
Put To Other Purposes
• How can present solutions be used for other problems?• Can lateral benchmarking be used to enable another
solution to solve your problem?• Common Questions:
– What other market could this product compete in? – Who or what else might be able to use it?– What are similar problems that have already been
solved?
17Weaver Intro to Triz
Put To Other Use Example
• Personal message boards and LED signs are commonly used for people to communicate across noisy rooms, so they were put to use by adding an LED programmable screen on a t-shirt
http://www.himfr.com/d-p114510137193575025-Led_Scrolling_Message_T-Shirt/
18Weaver Intro to Triz
Eliminate
• What would happen if a part of the product or process was eliminated?
• This shows how removing parts can affect the solution and helps to show importance of components.
• Common Questions:– What would happen if a component or part were
removed? – Is there another way of achieving the desired effect?
19Weaver Intro to Triz
Eliminate Example
• The Solo personal water ski machine - a small jet ski-like vehicle that has driving controls in the tow handle - eliminates the need for a full boat and driver in order to water ski
http://www.gizmag.com/go/1736/gallery/
20Weaver Intro to Triz
Reverse / Rearrange
• How would reversing part of the problem or process affect the solution?
• Maybe you are approaching things from the wrong direction
• Common Questions:– Can it be done the other way round?– How would the opposite effect be achieved?
21Weaver Intro to Triz
Reverse Example
• Studies at the University of Bonn in Germany, show that if farmers plough their fields during the night, instead of the day, weed seeds can’t get the sunlight that they need to begin germination
• Weeds are reduced such that herbicides are no longer needed
http://www.pegtopfarm.co.uk/page8.htm
22Weaver Intro to Triz
Step 3: Review Ideas
• Review ideas generated• Combine ideas• Look for recurring ideas• Looking for pattern in solutions• Use other innovation techniques/concept selection tools to
decide between best ideas