· 2013. 3. 20. · 4-011-11-0071 category: pod and rail cnc vacuum pods description &...
TRANSCRIPT
WWW.ADVANCEDCNCINN OVATIONS.C OM
CNC-ACCESSORIES1103 PROVIDENCE DR.
ALLEN, TX 75002
ERIC S. POWERSEmail: [email protected]
Phone: 817-233-0765 Fax: 214-383-5865CREDIT CARDS/PAYPAL ACCEPTED ON THE WEBSITE
WWW.ADVANCEDCNCINNOVATIONS.COM
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 125mm X 75mm X 100mm tall , Rotating half-pod
Features: This pod works on the aluminum rails. It features a replaceable plastic pod top and low cost rubber cover. It is very easy to disassemble and clean. With the assistance of an 8mm allen key, this pod will rotate and lock down at ANY angle.
Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation.
Associated Parts: Rubber cover, p/n: 24201000
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 140mm X 115mm X 100mm tall
Features: This pod works on the aluminum rails. It features a replaceable plastic pod top and low cost rubber cover. It is very easy to disassemble and clean.
Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation.
Associated Parts: Rubber cover, p/n: 24101000
Model Number: 075125100R
Price each: $200
Model Number: 140115100
Price each: $170
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 140mm X 115mm X 100mm tall
Features: This pod works on the aluminum rails. It features a rotating and replaceable pod top. It has superior holding power on rough surfaces like veneer.
Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation.
Associated Parts: Pod top, p/n: 24011003. large gasket, p/n: 24011026
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 145mm X 145mm X 36mm tall Weeke matrix pod
Features: This matrix pod is found on Weeke machines. Very low cost!
Which machines will it fit? Just Weeke machines.
Associated Parts: This pod comes with 3 ft of gasket material and the vacuum release valve
Model Number: 14011000
Price each: $180
Model Number: 24301000
Price each: $30/kit
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 125mm X 75mm X 100mm tall
Features: This pod works on the aluminum rails. It features a replaceable plastic pod top and low cost rubber cover. It is very easy to disassemble and clean.
Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation.
Associated Parts: Rubber cover, p/n: 24201000
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 15mm diameter, brass filter screen
Features: Low cost filter screen replacement
Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation.
Associated Parts: This filter screen fits in the rails.
Category: Electrical
Description & Dimensions: wireless contact
Features: This kit comes complete with easy setup instructions. Many use this for remote emergency stop button. Two key fobs matched to the receiver/transmitter will open/close a contact. Complete with battery pack, module, 2 key fobs.
Which machines will it fit? All machines. This has a potential free contact, so it can be wired to 24vdc or 120vac control voltage.
Model Number: 075125100
Price each: $170
Model Number: 34011014
Price each: $4.50
Model Number: 44011005
Price each: $120
Category: Nested Machine Pods
Description & Dimensions: Green router table pod for grid table machines, 135mm X 145mm X 29mm, full size
Features: Superior holding force, no gasket necessary
Which machines will it fit? ALMOST ANY grid table router. Call to ensure it fits your machine.
Associated Parts: Use this pod with other green grid table pods that are 29mm tall.
Category: Nested Machine Pods
Description & Dimensions: Green router table pod for Grid table machines, 135mm X 50mm X 48mm, Quarter size
Features: Superior holding force, no gasket necessary
Which machines will it fit? ALMOST ANY grid table router. Call to ensure it fits your machine.
Associated Parts: Use this pod with the vacuum operated locater stop, p/n: 413513548S
Category: Nested Machine Pods
Description & Dimensions: Vacuum operated stop pin for grid table machines, 48mm height
Features: Holds strong to grid table while using it as a zero stop Which machines will it fit? ALMOST ANY grid table router. Call to ensure it fits your machine.
Associated Parts: Use this pod with other green grid table pods that are 48mm tall.
Model Number: 413514529
Price each: $120
Model Number: 413505048
Price each: $140
Model Number: 413513548S
Price each: $150
Category: Nested Machine Pods
Description & Dimensions: Green router table pod for Grid table machines, 135mm X 75mm X 48mm, half size
Features: Superior holding force, no gasket necessary Which machines will it fit? ALMOST ANY grid table router. Call to ensure it fits your machine. Associated Parts: Use this pod with the vacuum operated locater stop, p/n: 413513548S
Category: Nested Machine Pods
Description & Dimensions: Green router table pod for grid table machines, 135mm X 145mm X 29mm, half size
Features: Superior holding force, no gasket necessary
Which machines will it fit? ALMOST ANY grid table router. Call to ensure it fits your machine.
Associated Parts: Use this pod with other green grid table pods that are 29mm tall.
Category: Nested Machine Pods
Description & Dimensions: Green router table pod for Grid table machines, 135mm X 145mm X 48mm, full size
Features: Superior holding force, no gasket necessary
Which machines will it fit? ALMOST ANY grid table router. Call to ensure it fits your machine
Associated Parts: Use this pod with the vacuum operated locater stop, p/n: 413513548S
Model Number: 413507548
Price each: $140
Model Number: 413507529
Price each: $130
Model Number: 413514548
Price each: $140
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 117mm X 117mm, miniature cover
Features: Low cost pod cover replacement
Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation that are 117mm X 117mm
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 160mm X 115mm, giant pod cover
Features: This pod cover is found on newer pod and rail machines. Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation that are 160mm X 115mm.
Associated Parts: Replaces OEM part number: 4-011-11-0192
Category: Pod and Rail CNC Vacuum Pods
Description & dimensions: 125mm X 75mm, half pod cover
Features: This pod cover is found on newer pod and rail machines. Note the slightly rotated “donut” shape on this pod cover.
Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation that are 125mm X 75mm.
Associated Parts: replaces OEM part number: 4-011-11-0196
Model Number: 31932000
Price each: $30
Model Number: 24001000
Price each: $35
Model Number: 24002000
Price each: $25
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 140mm X 115mm, full pod cover
Features: This pod cover is found on older pod and rail machines. Very low cost!
Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation that are 140mm X 115mm.
Associated Parts: Replaces OEM part number: 4-011-11-0071
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 125mm X 75mm, half pod cover
Features: This pod cover is found on older pod and rail machines. Very low cost!
Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation that are 125mm X 75mm. Notice the non-rotated “donut” shape on this cover.
Associated Parts: Peplaces OEM part number: 4-011-11-0079
Category: Pod and Rail CNC Vacuum Pods
Description & Dimensions: 120mm X 50mm, miniature cover
Features: Low cost pod cover replacement
Which machines will it fit? All machines that have pod/rail with screen covered magnets for vacuum activation that are 120mm X 50mm
Associated Parts: Replaces OEM part 4-011-11-0119
Model Number: 24101000
Price each: $15
Model Number: 24201000
Model Number: 24401000
Price each: $20
Price each: $15
CNC-ACCESSORIES1103 PROVIDENCE DR.
ALLEN, TX 75002
ERIC S. POWERSEmail: [email protected]
Phone: 817-233-0765 Fax: 214-383-5865CREDIT CARDS/PAYPAL ACCEPTED ON THE WEBSITE
WWW.ADVANCEDCNCINNOVATIONS.COM