2013 enamelite dr masek ti implant coated case 030113
TRANSCRIPT
Dentistry By Design, Inc
© Dr Rich Masek
Ceramic Spray AEROpaque
For
Titanium Crowns & Bridges
Implant Abutments
and Bars
Ceramic Spray AEROpaque
For
Titanium Crowns & Bridges
Implant Abutments
and Bars
Dentistry By Design, Inc
© Dr Rich Masek
Ti Bonder and Opaque Application Technique
Ti Bonder and Opaque Application Technique
Always use a analog holder through all steps to apply ceramic.
Prepare titanium surface to receive ceramic use a Clean Crosscut carbide bur.
Sandblast surface with minimum 120-150 micron aluminous oxide at a 45° degree angle with 20 to 30 pounds of air pressure.
Steam clean the restorations and let rest for minimum of 5-7 minutes to allow for natural oxide growth.
Using the analog holder to spray very light coat of Ti Bonder in front of suction device. Fire according to instructions. Properly applied Ti bonder will appear with a sheen and totally black color when applied properly.
Apply the opaque using same technique as bonder, two (2) coats , fired separately.
Glaze is the last application to make tissue are ideal for complimenting the tissue and etch the upper portion for optimal bonding to restoration.
Dentistry By Design, Inc
© Dr Rich Masek
Micro Thin Ceramic Coating of Ti Abutment
Micro Thin Ceramic Coating of Ti Abutment
Pre Coating ThicknessPost Coating
Thickness
Dentistry By Design, Inc
© Dr Rich Masek
Ideal Ti Bonder Coating for Optimal Bonding
Ideal Ti Bonder Coating for Optimal Bonding
Dentistry By Design, Inc
© Dr Rich Masek
Enamelite Titanium Spray Bonder and Opaque
Enamelite Titanium Spray Bonder and Opaque
Ti Bonder Sprayed Coping Ti Sprayed Opaque
Dentistry By Design, Inc
© Dr Rich Masek
AEROpaque Titanium Denture BarAEROpaque Titanium Denture Bar
Uncoated Ti Bar AEROpaqued Ti Bar
Dentistry By Design, Inc
© Dr Rich Masek
Importance Of Spray GlazeImportance Of Spray Glaze
AUFGESPRÜHT AUFGEPINSELT