251-365- windows
DESCRIPTION
TestTRANSCRIPT
Data Protection Administration for Windows(NBU 6.5)
Exam: 251-365 Edition: 2.0
CCCEEERRRTTT MMMAAAGGGIIICCC
251-365
1 http://www.certmagic.com
QUESTION: 1Which policy attribute must be selected for synthetic backups?
A. Collect true image restoreB. Collect image restore informationC. Collect true image restore information with move detectionD. Collect synthetic backup information with move detection
Answer: C
QUESTION: 2Where in the NetBackup Administration console do you create a disk location forbackups?
A. PoliciesB. StorageC. DevicesD. Disk Pools
Answer: B
QUESTION: 3Where can you configure media ownership? (Choose two.)
A. Policy-->AttributesB. Policy-->SchedulesC. Volume poolsD. Master server host propertiesE. Media server host properties
Answer: A, B
QUESTION: 4You are installing a new NetBackup client that must communicate across a firewall to itsmaster/media server. Which NetBackup process helps reduce the number of ports thatmust be opened in the firewall?
A. inetdB. bpcd
251-365
2 http://www.certmagic.com
C. vnetdD. bpinetd
Answer: C
QUESTION: 5What should you use to make more than one copy of a NetBackup 6.5 hot catalog backup atthe time of the backup creation?
A. Storage lifecyclesB. Multiple copiesC. DuplicationD. NetBackup Vault
Answer: B
QUESTION: 6How should you verify Windows tape device driver operation?
A. Run the scan command.B. Run tpautoconfig on the media server.C. Run robtest on the media server.D. Run tpconfig on the servers connected to the tape device.
Answer: A
QUESTION: 7What is the advantage of using SCSI Persistent Reserve (SPR) over SCSI-2 PrimaryCommand (SPC-2) reservation?
A. SPR can be used in mixed environments with SPC-2 Reserve.B. SPR will be retained over SCSI bus resets.C. SPR reservation standard is more mature.D. SPR reservation is supported by more operating systems.
Answer: B
QUESTION: 8
251-365
3 http://www.certmagic.com
Which type of disk can be used to write backups?
A. Shared drive without read permissionsB. Extended disk without a logical volumeC. LUN without a volumeD. RAID5 disk
Answer: D
QUESTION: 9Which policy tab is used to specify the e-mail address for the disaster recovery file?
A. AttributesB. SchedulesC. Disaster RecoveryD. Backup Selections
Answer: C
QUESTION: 10Which area of a policy is used to assign a retention level for a backup job?
A. FilesB. ClientsC. AttributesD. Schedules
Answer: D
QUESTION: 11A new NetBackup installation has 10,000 tapes in a single library and 27 volumepools. Which NetBackup feature allows automatic assignment of free tapes to any of the27 pools when the pool runs out of tapes?
A. Setting up a scratch pool.B. Setting up volume group for each pool.C. Enabling media multiplexing for each policy.D. Enabling auto-assign media in the Universal Attributes tab.
251-365
4 http://www.certmagic.com
Answer: A
QUESTION: 12The NetBackup system administrator receives a request to ensure the daily backup of theRegistry on all Microsoft Windows 2003 Servers. Which file list ensures the backup of theMicrosoft Windows Registry?
A. C:\B. Registry:\C. Shadow_Copy_Components:\D. LOCAL_DRIVES
Answer: C
QUESTION: 13You have ten different volume pools in your NetBackup environment. You have a limitednumber of available tapes. What is the recommended method to assign tapes to differentvolume pools?
A. Use the NetBackup volume pool.B. Manually move tapes to every pool.C. Configure a temp pool and assign all available tapes to the temp pool.D. Configure a scratch pool and assign all available tapes to the scratch pool.
Answer: D
QUESTION: 14When using the JAVA console, which file needs to be edited to allow someone other thanroot or administrator to administrate the NetBackup master server?
A. bp.confB. auth.confC. vm.confD. security.conf
Answer: B
QUESTION: 15To use NetBackup LiveUpdate, your LiveUpdate clients must be at version _____ or
251-365
5 http://www.certmagic.com
greater.
A. 5.0B. 5.1C. 6.0D. 6.5
Answer: D
QUESTION: 16A new NetBackup UNIX client has been configured and only the root file system (/) isbeing backed up. All file systems should be backed up. What can you do to have all filesystems backed up?
A. Select Cross mount pointsB. Select Cross file systemsC. Use CROSS_MOUNT_POINTS in the file listD. Use ALL_LOCAL_FILESYSTEMS in the file list
Answer: A
QUESTION: 17Which of the following policy types is supported with synthetic backup?
A. Standard or MS-WindowsB. Standard or MS-Windows-NTC. DataStore or MS-WindowsD. DataStore or Standard
Answer: B
QUESTION: 18Which selections are necessary in a single Solaris client policy to have only two backupjobs run at the same time, when there are four file streams listed?
A. Standard, Allow multiple data streams, and Limit jobs per client=2B. Standard, Allow multiple data streams, and Limit jobs per policy=2C. Solaris, Allow multiple data streams, and Limit jobs per client=2D. Solaris, Allow multiple data streams, and Limit jobs per policy=2
251-365
6 http://www.certmagic.com
Answer: B
QUESTION: 19You have a policy as follows: Four Windows 2003 clients, each client having a C:\ and D:\drive Allow multiple data stream selected Storage Unit with 16 drivesALL_LOCAL_DRIVES selected How many data streaming backup jobs will runsimultaneously?
A. 4B. 8C. 12D. 16
Answer: C
QUESTION: 20Which statement is true about a policy that has its start window set to daily from 8:00 p.m.to 11:00 p.m.?
A. Backups will always start at 8:00 p.m.B. Backups will never run past 11:00 p.m.C. Backups will never start after 11:00 p.m.D. Backups will pause at 11:00 p.m.
Answer: C
QUESTION: 21
To enable NetBackup LiveUpdate logs, where do you create two directories called patchand liveupdate?
A. install_path\netbackupB. install_path\liveupdateC. install_path\netbackup\logsD. install_path\liveupdate\logs
Answer: C
251-365
7 http://www.certmagic.com
QUESTION: 22What should be done to ensure that the NetBackup environment is recoverable in case of adisaster? (Choose two.)
A. Maintain tapes in the scratch pool.B. Maintain NetBackup catalog in sync state.C. Back up the NetBackup catalogs on the master server.D. Back up the EMM database on the EMM server.E. Back up the mediaDB on all media servers.
Answer: C, D
QUESTION: 23A new policy has been created with Full and Incremental schedules using a PoolB volumepool. The Incremental schedule is using the tapes out of the PoolB volume pool. A volumepool, named PoolA, has been configured for incremental backups. How do you enable theIncremental schedule to use the PoolA volume pool?
A. Policy-->Attributes-->Policy volume pool-->PoolAB. Policy-->Schedules-->Incremental-->Policy volume pool-->Deselect PoolBC. Policy-->Schedules-->Attributes-->Override policy volume pool-->Incremental-->PoolAD. Policy-->Schedules-->Incremental-->Attributes-->Override policy volume pool-->PoolA
Answer: D
QUESTION: 24The NetBackup system administrator must create a policy to do a total system backup of theorganization's Windows 2003 Servers. Which backup selection should the systemadministrator use?
A. Local_DrivesB. Local_Drives and Shadow_Copy_ComponentsC. All_Local_DrivesD. All_Local_Drives and Shadow_Copy_Components
Answer: C
251-365
8 http://www.certmagic.com
QUESTION: 25Which volume pools can be configured for Maximum Partially Full (MPF)?
A. NetBackupB. CatalogBackupC. scratchD. None
Answer: A
QUESTION: 26What is a function of robtest?
A. It communicates directly with a tape library.B. It tests tape drives within a library.C. It sets barcode length.D. It tests tape drive availability.
Answer: A
QUESTION: 27Which properties are defined in a tape storage unit? (Choose three.)
A. Drive densityB. Media serverC. Drive pathD. Drive nameE. Drive multiplexing
Answer: A, B, E
QUESTION: 28How do you specify an exclude list for a single schedule within a policy?
A. Windows clients-->Exclude List-->Add-->All policies. Type in the schedule name.B. Windows clients-->Exclude List-->Add. Type the name of the policy type in theschedule name.C. Windows clients-->Exclude List. Check Exceptions to the exclude list.
251-365
9 http://www.certmagic.com
D. Windows clients-->Include List. Check Exceptions to the exclude list.
Answer: B
QUESTION: 29What is the default number of days that a failed restore job can remain in an Incompletestate prior to being moved to a Done state?
A. 1B. 3C. 7D. 14
Answer: C
QUESTION: 30Where in the NetBackup Administration console is the backup fragment size set?
A. PoliciesB. Storage UnitsC. Media Manager-->DevicesD. Host Properties-->Media Manager
Answer: B
QUESTION: 31Which disk volume types are unsupported within a single AdvancedDisk pool?
A. Volumes from two separate disk enclosuresB. Volumes from two separate media serversC. Volumes with different storage capacityD. Volumes rated for different write speeds
Answer: B
QUESTION: 32Tapes are being frozen because they were previously used by another application. Whichparameter do you need to modify?
251-365
10 http://www.certmagic.com
A. Media servers host properties-->Allow media overwriteB. Master servers host properties-->Allow multiple retention per mediaC. Master servers host properties-->Allow media overwriteD. Media servers host properties-->Allow multiple retention per media
Answer: A
QUESTION: 33When using the Device Configuration wizard in the NetBackup Administration console,what can be automatically defined? (Choose three.)
A. RobotsB. DrivesC. SchedulesD. PoliciesE. Storage units
Answer: A, B, E
QUESTION: 34You enabled Multiple Data Streams for a policy. Which file list backs up local volumesC:\, D: and E:\ using two streams?
A. C:\ D:\ NEW_STREAM E:\ NEW_STREAMB. C:\D:\ NEW_STREAM E:\C. NEW_STREAM C:\ D:\ NEW_STREAM E:\D. NEW_STREAM ALL_LOCAL_DRIVES NEW_STREAM
Answer: C
QUESTION: 35What is the maximum number of backup destinations allowed in a storage lifecycle policy?
A. 6B. 8C. 10D. 12
251-365
11 http://www.certmagic.com
Answer: C
QUESTION: 36You want to use multiple disk destinations for backup. What is the recommendedconfiguration for disk storage destinations in NetBackup, using BasicDisk?
A. A folder for each destination and a storage unit for each subdirectory.B. A drive letter for each destination and a storage unit for drive letter.C. A drive letter for each destination and a single storage unit.D. A folder for each destination and a single storage unit.
Answer: B
QUESTION: 37What is the default volume pool in a backup policy?
A. NoneB. ScratchC. DataStoreD. NetBackupE. Any
Answer: D
QUESTION: 38Which statement is true about NetBackup LiveUpdate policies?
A. LiveUpdate policies on a Windows master server can be configured to update UNIXclients.B. LiveUpdate policies can include clients at NetBackup version 6.0 or higher.C. LiveUpdate policies are created by specifing a policy type of NBU-Live-Up.D. LiveUpdate policies can be scheduled.
Answer: A
QUESTION: 39Which policy attribute allows backups to be restarted, without starting from thebeginning?
251-365
12 http://www.certmagic.com
A. Cross mount pointsB. Take checkpoints everyC. Collect true image restore informationD. Collect disaster recovery information
Answer: B
QUESTION: 40Where in the media server host properties is the master server defined?
A. ServersB. Global MasterC. General ServerD. Universal Attributes
Answer: A
QUESTION: 41Which statements are true about NetBackup LiveUpdate? (Choose three.)
A. You can use NetBackup LiveUpdate to install PBX release updates.B. You can use NetBackup LiveUpdate in a clustered environment.C. You can use NetBackup LiveUpdate to install NOM release updates.D. You can use NetBackup LiveUpdate on master servers, media servers, and clients.E. You can use NetBackup LiveUpdate to automatically install release updateswithout intervention.
Answer: A, B, D
QUESTION: 42Which capabilities are available in the NetBackup 6.5 calendar-based scheduler? (Choosethree.)
A. Run a user backup jobB. Run a cold catalog backupC. Exclude a backup job on a specific dateD. Run a backup job on the fourth Friday of the monthE. Run a backup job on the last calendar day of the month
251-365
13 http://www.certmagic.com
Answer: C, D, E
QUESTION: 43Where is media sharing enabled? (Choose two.)
A. In the Server Group configurationB. In the Volume Group configurationC. In the master server host properties under MediaD. In the Volume Pool configurationE. In options for each individual media
Answer: A, C
QUESTION: 44Which information is included in the disaster recovery e-mail sent by the hot catalogbackup?
A. EMM server, Backup Media, DR file name and locationB. EMM server, Recovery Media, DR file name and locationC. Media Server, Critical Backup Recovery Media, DR file name and locationD. Media Server, Catalog Recovery Media, DR file name and location
Answer: D
QUESTION: 45Which statements are true about data classifications? (Choose two.)
A. Data classifications are deleted in Host Properties.B. The default data classifications are gold, silver, bronze, and copper.C. The data classification in a policy must match the data classification of aselected storage lifecycle.D. Data classifications are displayed by typing nbdc -L.E. Data classifications must be used when using storage lifecycles.
Answer: C, D
QUESTION: 46
251-365
14 http://www.certmagic.com
Which fields are automatically populated when the JAVA administration console is started?
A. Host name, PasswordB. User name, PasswordC. Master Server, User IDD. User name, Master ServerE. User name, Host Name
Answer: E
QUESTION: 47Backups that target an AdvancedDisk storage unit are unable to span _____.
A. To a different volume in the disk pool.B. To a volume with a different file system.C. From one disk pool to another.D. From one disk enclosure to another.
Answer: C
QUESTION: 48You check the All Log Entries report and find this message: Hot catalog backup is notconfigured for train1. How can you configure NetBackup database backups?
A. Create a catalog backup policy using policy type NBU-Catalog.B. Create a catalog backup policy using policy type Sybase.C. Create a catalog backup policy using policy type Standard.D. Create a catalog backup policy using policy type MS-Windows-NT.
Answer: A
QUESTION: 49NetBackup has been configured with ten storage units. A policy must have the abilityto use only storage units A and B for its backup jobs. What can be done to allow thepolicy to use only these two storage units?
A. Select Any Available as the policy storage unit.B. Create a new storage unit and include storage unit A and storage unit B byconfiguring multi- copies.
251-365
15 http://www.certmagic.com
C. Create a storage unit group with storage unit A and configure drives in storage unit Busing multi- copies.D. Create a storage unit group that includes storage units A and B and add the group asthe policy storage unit.
Answer: D
QUESTION: 50By default, retention periods are listed in which order in a policy schedule?
A. Smallest period to largest periodB. Largest period to smallest periodC. Order createdD. Random order
Answer: A
QUESTION: 51What do you select to create a storage lifecycle policy?
A. Policies-->Storage Lifecycle PoliciesB. Storage-->Storage Lifecycle PoliciesC. Policies-->New Policy-->Storage Lifecycle PoliciesD. Storage-->Storage Policies-->Storage Lifecycle Policies
Answer: B
QUESTION: 52You have a Microsoft Windows 2003 client with volumes C:\, D: and E:\. You want toback up all local drives and the Registry with the exception of drive D:\ without usingexclude lists. Which file list entries should be listed in the policy? (Choose three.)
A. C:\B. E:\C. SYSTEM_STATE:\D. Shadow Copy Components:\E. ALL_LOCAL_DRIVES
251-365
16 http://www.certmagic.com
Answer: A, B, D
QUESTION: 53Where can Windows Open File Backup be disabled?
A. Master Servers-->Universal SettingsB. Master Servers-->Client AttributesC. Media Servers-->Universal SettingsD. Clients-->Client Attributes
Answer: B
QUESTION: 54When should SCSI Persistent Reservation (SPR) be used? (Choose three.)
A. When the media server is clustered.B. When the media server has multiple SCSI paths to a tape drive.C. When tape drives are connected via parallel SCSI cable.D. When high tape drive availability is required.E. When the operating system supports SPR.
Answer: A, B, D
QUESTION: 55Which options are needed for a future Synthetic backup? (Choose two.)
A. Collect true image restore informationB. Cross mount pointC. Take checkpoints everyD. with move detectionE. Allow multiple data streams
Answer: A, D
QUESTION: 56When installing NetBackup, you select a server type for the LiveUpdate agent. Whatdoes the server type specify?
A. The operating system of the master server
251-365
17 http://www.certmagic.com
B. The operating system of the LiveUpdate serverC. How to access the master serverD. How to access the release updates
Answer: D
QUESTION: 57You are configuring the latest model of tape drive and NetBackup requires anupdated device mappings package. Where is the device mappings package installed?
A. On the EMM server onlyB. On all media serversC. On the master serverD. Only on the media servers that can see the new tape drives
Answer: A
QUESTION: 58Which command can be used to configure tape drives and robotic devices?
A. tpautoconfigB. tpconfigC. tpreqD. tpext
Answer: B
QUESTION: 59What must be done before configuring a new AdvancedDisk disk pool?
A. Define an AdvancedDisk storage server.B. Create an AdvancedDisk storage unit.C. Inventory the disk enclosure in NetBackup.D. Format the volumes using the nbdevconfig command.
Answer: A
QUESTION: 60Which command can be used to manage volume pools?
251-365
18 http://www.certmagic.com
A. nbemmcmdB. vmpoolC. vmcheckxxxD. vmupdate
Answer: B
QUESTION: 61Which storage unit types are supported with synthetic backup?
A. Tape storage units onlyB. Disk storage units onlyC. Tape and disk storage units onlyD. Tape, disk, and NDMP storage units
Answer: C
QUESTION: 62What must be done before an AdvancedDisk pool can be deleted? (Choose two.)
A. All backups to the pool must be expired.B. All volumes must be removed from the pool.C. The storage server must be deleted.D. The storage unit must be deleted.E. The media server must be taken offline.
Answer: A, D
QUESTION: 63Which statement is true about storage lifecycles?
A. Staged capacity managed retention is only available on disk storage units.B. Backups are guaranteed to remain on the disk for the desired cache period.C. Data classifications are required if backing up to tape storage units.D. Backup types include backup, duplicate, and catalog.
251-365
19 http://www.certmagic.com
Answer: A
QUESTION: 64Which steps do you perform to set up a scratch pool? (Choose two.)
A. Create a volume pool.B. Add a line in bp.conf: SCRATCH_POOL = SCRATCH.C. Create a file called SCRATCH_POOL and type SCRATCH in it.D. Mark the Scratch Pool checkbox in the NetBackup Administration console.E. Create a volume group called Scratch Pool.
Answer: A, D
QUESTION: 65Which Global Attributes setting is used to enable more backup jobs to occurconcurrently on a client?
A. Maximum jobs per clientB. Maximum backup copiesC. Maximum concurrent jobsD. Schedule backup attempts
Answer: A
QUESTION: 66The Inventory Robot function within the NetBackup Administration console is used to_____.
A. List ejected tapesB. Delete bad mediaC. Unfreeze frozen mediaD. Update the volume configuration
Answer: D
QUESTION: 67There are ten tape drives of the same type attached to one media server. Company policydictates that at least one drive is always available for restores. How can you accomplishthis?
251-365
20 http://www.certmagic.com
A. You configure ten tape drives and create a second storage unit with at least onetape drive for use with restores.B. You configure ten tape drives. The total number of tape drives defined in all storageunits must be less than ten.C. You configure nine tape drives and create a second storage unit with at least onetape drive for use with restores.D. You configure nine tape drives. The total number of tape drives defined in all storageunits must be less than nine.
Answer: B
QUESTION: 68Which servers can be added to a server group? (Choose three.)
A. Master serverB. Media serverC. EMM serverD. NDMP tape serverE. NOM server
Answer: A, B, D
QUESTION: 69Which statements are true about installing multiple media servers? (Choose two.)
A. All media server installations require a server license key.B. All media server installations must be pushed from the master server.C. All media server installations should be performed as root/administrator.D. All media server installations can be pushed from a media server with the same OS.E. All media server installations require a tape drive be configured on the system.
Answer: A, C
QUESTION: 70What is the name of the silent installation script for a Windows client?
A. silentinstall.cmdB. silentclient.cmd
251-365
21 http://www.certmagic.com
C. silentNetBackup.cmdD. silentwindows.cmd
Answer: B
QUESTION: 71When the master server is running NetBackup version 6.5, what is the minimum version ofNetBackup that can be running on a media server?
A. 5.0 MP3B. 5.0 MP4C. 5.1D. 5.1 MP4
Answer: B
QUESTION: 72Which guidelines should be followed when conducting a NetBackup media serverinstallation?(Choose three.)
A. You should remove any other vendor backup software.B. At least one tape drive should be available for backup operations.C. All NetBackup servers should recognize and be recognized by their client systems.D. You should make certain that you have a server of a supported hardware type runninga supported version of an OS.E. You should remove previous versions of NetBackup in a Windows environment.
Answer: A, C, D
QUESTION: 73Which NetBackup option uses snapshot technology to perform rapid snapshot-basedrestores?
A. Intelligent Disaster Recovery (IDR)B. True image restore with move detectionC. Disk staging storage unit restoreD. Instant Recovery
251-365
22 http://www.certmagic.com
Answer: D
QUESTION: 74You have just installed a NetBackup 6.5 master server and the EMM server is on adifferent machine. In addition to bprd, bpjobd, and nbpem, which other processes would berunning on the master server if the installation was successful?
A. bpbrm, nbrbB. bpdbm, nbemmC. bpdbm, nbjmD. bpbrm, nbjm
Answer: C
QUESTION: 75Your organization requires that all data transfers from site to site with NetBackup use a128-bit Data Encryption Standard (DES) Key. You have ten remote clients that must backup to a media server over the WAN. Which NetBackup option is required to provide thenecessary security?
A. NetBackup DESB. NetBackup SecurityC. NetBackup EncryptionD. NetBackup Access Management
Answer: C
QUESTION: 76Which NetBackup components make up IRM?
A. nbpem, nbjobd, nbgenjobB. nbpem, nbjm, nbrbC. nbpem, nbgenjob, nbjmD. nbpem, nbrb, nbsl
Answer: B
QUESTION: 77What is updated during a NetBackup installation on Windows 2003?
251-365
23 http://www.certmagic.com
A. C:\WINDOWS\System32\drivers\etc\services andC:\\WINDOWS\System32\drivers\etc\hostsB. C:\WINDOWS\System32\drivers\etc\services and Windows RegistryC. C:\WINDOWS\System\drivers\etc\services andC:\\WINDOWS\System\drivers\etc\hostsD. C:\WINDOWS\System\drivers\etc\services and Windows Control Panel
Answer: B
QUESTION: 78What is the name of the Netbackup service running after installation of a Windows client?
A. NetBackup Windows ServiceB. NetBackup Client ServiceC. NetBackup Remote ServiceD. NetBack File System Service
Answer: B
QUESTION: 79NetBackup Operations Manager provides some useful utilities to help manage the NOMdatabase. Which command is used to launch the utility to perform NOM maintenance?
A. NOMadmincmdB. NOMadminC. NOMcmdD. NOMadm
Answer: B
QUESTION: 80Which actions can you take when performing a custom client installation on a MicrosoftWindows 2003 system? (Choose two.)
A. You can deselect Veritas Snapshot Provider.B. You can change the default port numbers.C. You can only add up to five media servers.D. You can set a custom location for the NetBackup catalog.
251-365
24 http://www.certmagic.com
E. You can select to install the EMM database server.
Answer: A, B
QUESTION: 81What is required for the NetBackup 6.5 FlashBackup Option?
A. NetBackup Enterprise ServerB. Disk-based storage unitsC. Multiple data streams enabledD. Off-host backups enabled
Answer: A
QUESTION: 82Which command is used to view NetBackup processes?
A. bppsB. bpnosC. bpverifyD. bpsl
Answer: A
QUESTION: 83Which backup method can restore individual files from a raw disk backup?
A. Copy on write snapshotB. Mirror snapshotC. FlashBackupD. True image restore
Answer: C
QUESTION: 84Where is the NetBackup Service Layer (NBSL) Service found?
A. Master server only
251-365
25 http://www.certmagic.com
B. Master and media serverC. EMM serverD. Client
Answer: B
QUESTION: 85Which processes are found on a NetBackup UNIX client? (Choose three.)
A. bpbkarB. bpbrmC. tar D. bpcompatdE. bpcd
Answer: A, C, E
QUESTION: 86Attempts to remotely install NetBackup client software on a new UNIX client fail.What are possible solutions for this problem? (Choose two.)
A. Turn on universal access in the /etc/services fileB. Add the user MASTER_SERVER on the clientC. Enter the master server and root in the .rhosts file in the root directoryD. Type the master server's name and IP address in the client's hosts fileE. Update the /etc/inetd file on both machines
Answer: C, D
QUESTION: 87Which statements are true about upgrading an existing NetBackup installation toNetBackup 6.5? (Choose two.)
A. All master and media servers must be on the same revision level.B. All clients must be on the same revision level as their media servers.C. A media server may be one major revision level lower than the master server.D. A client may be one major revision level lower than the master server.E. A master server may be one major revision level lower than a media server.
251-365
26 http://www.certmagic.com
Answer: C, D
QUESTION: 88On which Microsoft Windows operating systems can the NetBackup client be installed?(Choose four.)
A. Microsoft Windows 2003B. Microsoft Windows XPC. Microsoft Windows VistaD. Microsoft Windows 2000E. Microsoft Windows NT 4.0F. Microsoft Windows NT 3.5.1
Answer: A, B, C, D
QUESTION: 89In a NetBackup 6.5 environment, the image database resides _____.
A. Within the EMM databaseB. On the EMM server in binary formatC. On the master server in binary formatD. Within the master server's Sybase database
Answer: C
QUESTION: 90Which commands can be used to verify that NetBackup was installed with thecorrect master, media, and EMM servers?
A. bpgetconfig SERVER bpgetconfig EMMSERVER nbemmcmd -listhosts – verboseB. nbemmcmd -listsettings nbemmcmd -listhosts -verbose bpgetconfigC. bpgetconfig nbemmcmd - listmedia nbemmcmd - emmserverD. bpgetconfig SERVER nbemmcmd - getemmserver nbemmcmd -listhosts - verbose
Answer: A
QUESTION: 91Which statement is true about the relationship between a master server and an EMM
251-365
27 http://www.certmagic.com
server?
A. An EMM server supports only one master server.B. An EMM server supports more than one master server.C. A master server may use more than one EMM server.D. A master server may use an EMM server one major version behind.
Answer: B
QUESTION: 92Which operating systems are supported as clients in NetBackup 6.5? (Choose three.)
A. Windows 2000B. Windows NT 4.0 SP6C. Windows 2003D. Solaris 7E. Solaris 9
Answer: A, C, E
QUESTION: 93Which Symantec shared component is required for the installation of NetBackupOperations Manager?
A. Symantec Private Authorization ServiceB. Symantec Private Authentication ServiceC. Symantec Product Authorization ServiceD. Symantec Product Authentication Service
Answer: D
QUESTION: 94Which NetBackup Operations Manager databases need to be protected for recoverypurposes?
A. vxndb and vxauthB. vxdb and vxatC. vxpmdb and vxamD. vxnom and vxdb
251-365
28 http://www.certmagic.com
Answer: C
QUESTION: 95What is the minimum server version that can be upgraded directly to NetBackup 6.5?
A. 3.4B. 4.5C. 5.1D. 6.0
Answer: C
QUESTION: 96A recovery of your NetBackup catalogs has failed. Which location contains a log of therecovery?
A. install_path\NetBackup\logs\bprecoverB. install_path\NetBackupDB\logsC. install_path\NetBackup\logs\user_ops\username\logsD. install_path\NetBackup\logs\logs (unified logs)
Answer: C
QUESTION: 97You receive Status Code 1: the requested operation was partially successful. How doyou analyze this result?
A. Review the bpdbjobs log file on the master server.B. Review All Log Entries under Reports on the master server.C. Review the bpdbm log file on the master server.D. Review the bpcd log on the master server.
Answer: B
QUESTION: 98Which framework component does Enterprise Media Manager (EMM) and otherservices of NetBackup require?
251-365
29 http://www.certmagic.com
A. NetBackup LiveUpdate (NBLU)B. Private Branch Exchange (PBX)C. Symantec Proxy Service (SPS)D. Symantec Monitoring Service (SMS)
Answer: B
QUESTION: 99Which command can be run from the client to verify client-to-master host nameresolution and configuration within NetBackup?
A. bpclntcmd -pnB. bpclntcmd -ipC. bpclntcmd -clientD. bpclntcmd -master
Answer: A
QUESTION: 100Media ID A00001 continues to have various errors. You are unsure if you are havingproblems with this tape or a specific tape drive. Which file can be reviewed to see when theerror occured and which tape drive was being used?
A. errorsB. mediaDBC. bpdm logD. bpbkar log
Answer: A
QUESTION: 101What is the default location for unified logs?
A. install_path\logsB. install_path\netbackup\logsC. install_path\netbackup\bin\logsD. install_path\netbackup\support\logs
251-365
30 http://www.certmagic.com
Answer: B
QUESTION: 102Which NetBackup process is responsible for reading data from the client during a backup?
A. bprdB. bpcdC. bpbkar32D. bpbackup
Answer: C
QUESTION: 103Which options are available when running a hot, online catalog recovery through theRecover the catalogs wizard? (Choose two.)
A. Recover entire NetBackup relational databaseB. Recover entire NetBackup catalogC. Recover only NetBackup relational database and configuration filesD. Recover only NetBackup catalog image and relational databaseE. Recover only NetBackup catalog image and configuration files
Answer: B, E
QUESTION: 104The network administrator indicates that emergency maintenance was required late lastnight on the network used for backup traffic. You must determine the impact thismaintenance had on the scheduled backups. Which status code indicates a job was affectedby the network maintenance?
A. Status code: 5B. Status code: 11C. Status code: 58D. Status code: 83
Answer: C
QUESTION: 105
251-365
31 http://www.certmagic.com
During a restore, Status Code 5: the restore failed to recover the requested files isdisplayed in the Activity Monitor. The client server list contains the master server hostname. What is a possible cause of Status Code 5?
A. The media is unavailable.B. A catalog backup failed to run after the last backup session.C. The restore was started from the master server instead of from the client.D. The restore requires a media server that is missing from the client server list.
Answer: D
QUESTION: 106Where can you find the definition of a status code of a failed job? (Choose two.)
A. Reports-->SummaryB. NetBackup Administration console-->Help-->TroubleshooterC. NetBackup Troubleshooting GuideD. NetBackup System Administrators GuideE. NetBackup Administration console-->Failed Jobs-->Troubleshooter
Answer: B, C
QUESTION: 107A job fails with Status Code 96: unable to allocate new media. What causes this error?(Choose two.)
A. The tape device is down.B. The robot is incorrectly defined.C. The media server is offline.D. The density of available media is invalid.E. The scratch pool is empty.
Answer: D, E
QUESTION: 108Which script can be used to create all legacy log folders or directories?
A. mklogdirB. mklogsdir
251-365
32 http://www.certmagic.com
C. mkdirlogD. mkdirlogs
Answer: A
QUESTION: 109Which NetBackup 6.5 logs can be used to help identify disk storage hardware issues?
A. nbpem and nbjmB. bpbrm amd bpdbmC. nbproxy and bpjobdD. bptm and bpdm
Answer: D
QUESTION: 110Due to a hardware failure, the NetBackup master server must be reinstalled on a newsystem. After this installation, what should be done to recover the NetBackup catalogs?
A. Recover the NetBackup catalogs and then patch to the most current release update.B. Recover the NetBackup catalogs and then patch to the same release update previouslyinstalled.C. Patch to the most current release update and then recover the NetBackup catalogs.D. Patch to the same release update previously installed and then recover the catalogs.
Answer: D
QUESTION: 111Which NetBackup process is responsible for reading and writing to a tape device?
A. bpdmB. bptmC. gnutarD. tar
Answer: B
QUESTION: 112
251-365
33 http://www.certmagic.com
A NetBackup administrator receives Status Code 58 Can connect to clientStatus Code 58Can? connect to client every time there is a backup attempt of the client named alpha.Which command can be used to help determine if the NetBackup client service islistening?
A. bpclntcmd -hn alphaB. bpplclient -hn alphaC. bptestbpcd -client alphaD. bpclient -client alpha
Answer: C
QUESTION: 113A NetBackup administrator receives Status Code 41: Network connection timed out forsome backups of a client. Which parameters can be modified to help resolve this problem?(Choose two.)
A. BPCD_KEEP_ALIVEB. CLIENT_CONTINUE_BACKUPC. CLIENT_READ_TIMEOUTD. CLIENT_BPSTART_TIMEOUT
Answer: C
QUESTION: 114You are investigating a tape drive failure on a Windows media server. In which locationscan you find information about the failure? (Choose three.)
A. bpdm logB. Activity MonitorC. bptm logD. Application and system event logsE. Security log
Answer: B, C, D
QUESTION: 115Which command can be used to simulate the hot, online Recover the Catalogs wizard inthe NetBackup Administration console?
251-365
34 http://www.certmagic.com
A. bprecover -guiB. bprecover -wizardC. bprecover -wguiD. bprecover -wiz
Answer: B
QUESTION: 116The tape drive has a media type of HCART2. The media type of the storage unit must be_____ and the individual media's media type must be _____.
A. HCART; HCART2B. HCART2; HCARTC. HCART; HCARTD. HCART2; HCART2
Answer: D
QUESTION: 117Several new NetBackup clients have been brought online. The NetBackup client softwareis installed and configured identically on all client systems. A test backup is run to verifythat the clients can be backed up. Approximately half of the jobs failed with status code 59.What is a possible cause for this job failure?
A. All available storage units were used and some media servers were missing from theclient's server lists.B. The media server used by the test backup did not have a network path to some clients.C. The media server was unable to resolve the host names of all of the new clients.D. Some of the clients did not support the policy type configured in the test backup.
Answer: A
QUESTION: 118A client backup failed with Status 213: no Storage Units available for use. The client is in apolicy that is directed toward Any Available storage unit. What is a possible reasons forStatus Code 213?
A. Storage units are set to Maximum concurrent jobs = 1.
251-365
35 http://www.certmagic.com
B. Storage units are set to Maximum concurrent write drives = 1.C. Storage units media is unavailable.D. Storage units are set to On Demand Only.
Answer: D
QUESTION: 119Which log is useful only on a media server?
A. bprdB. bptmC. bpdbmD. bpbkar
Answer: B
QUESTION: 120A NetBackup system administrator is trying to restore the NetBackup catalogs fordisaster recovery testing. Which command is used to restore the NetBackup catalogs?
A. bprecoverB. bprestoreC. dbrecoverD. nbdbrestoreE. bpcatrecover
Answer: A
QUESTION: 121Which commands are used for configuring and managing unified logging? (Choose two.)
A. vxlogcfgB. vxlgcfgC. vxlogconD. vxlogmgrE. vxlgmgrF. vxlogman
251-365
36 http://www.certmagic.com
Answer: A, D
QUESTION: 122Which options are available when selecting a media ID in the NetBackupAdministration console?(Choose three.)
A. Quick eraseB. Long eraseC. ExpireD. UnassignE. Freeze
Answer: A, B, E
QUESTION: 123Which NetBackup process is responsible for scheduling backup jobs on the master server?
A. nbrbB. bpbrmC. bpjobdD. nbpem
Answer: D
QUESTION: 124Which statements are true about legacy logging? (Choose three.)
A. Legacy logs should always be enabled.B. Processes or services must be restarted to activate some legacy logging.C. Log folders or directories must be created for each process to be logged.D. Logging levels are set in the host properties.E. Legacy logs are written in the same format as unified logs.
Answer: B, C, D
QUESTION: 125A NetBackup administrator is getting Status Code 54: Ttimed out connecting toclient for all backups of a client. Which command can be used to help troubleshoot thisproblem?
251-365
37 http://www.certmagic.com
A. nbpingB. bpverifyC. bpclntcmdD. bpconnect
Answer: C
QUESTION: 126Which NetBackup tool is available to test a tape library?
A. robtestB. tptestC. avrtestD. robotic_test
Answer: A
QUESTION: 127Which standard format is used to name unified logs?
A. productID-originatorID-hostID-date-rotation.logB. originatorID-productID-hostID-date-rotation.logC. date-productID-originatorID-hostID-rotation.logD. rotation-productID-originatorID-hostID-date.log
Answer: A
QUESTION: 128NetBackup is unable to communicate with a Windows media server tape device afterit has been configured. What should you do to troubleshoot this problem?
A. Check the Device Manager and verify the tape driver.B. Check the Device Manager and device configuration file.C. Check the Device Manager and device setup file.D. Check the Device Manager and the bpdm log.
Answer: A
251-365
38 http://www.certmagic.com
QUESTION: 129Where do you create log folders to enable legacy debug logging?
A. install_path\NetBackup\logB. install_path\NetBackup\logsC. install_path\NetBackup\debug\logD. install_path\NetBackup\debug\logs
Answer: B
QUESTION: 130After successfully installing three UNIX clients, all backups for those clients fail withStatus Code 59: access to the client was not allowed. What should the systemadministrator do to resolve this problem?
A. Reboot the UNIX clients.B. Restart the master server daemons.C. Verify that the media server is listed in the bp.conf file.D. Edit the .rhosts file on the client and add the master server name.
Answer: C
QUESTION: 131During hot, online catalog recovery, the DR file is found to be corrupt or unavailable.What can you do to solve this problem?
A. Add a touch file.B. Run import on catalog media.C. Import catalog image to disk.D. Run bprecover from the command line with additional switches.
Answer: B
QUESTION: 132Which report reads the media to determine the backup images?
A. Tape ListsB. Tape Written
251-365
39 http://www.certmagic.com
C. Tape ContentsD. Tape SummaryE. Images on Tape
Answer: C
QUESTION: 133Which command displays NetBackup media status?
A. bpexpdateB. bpimmediaC. bpmedialistD. bpmediastatus
Answer: C
QUESTION: 134Which two commands can be used to check and update the robot inventory? (Choose two.)
A. vmcheckB. bpupdateC. vmchangeD. vmupdateE. vmcheckxxx
Answer: D, E
QUESTION: 135Which report provides a list of media that were used in the last five hours?
A. Tape ListsB. Tape WrittenC. Tape ContentsD. Tape SummaryE. Status of Backups
Answer: B
251-365
40 http://www.certmagic.com
QUESTION: 136When a restore is performed to client A, which process will go active when the restorestarts?
A. TarB. bpbkarC. Bpbkar32D. Tar32
Answer: D
QUESTION: 137When attempting to restore a UNIX client, which policy type needs to be selected?
A. StandardB. LinuxC. NetWareD. UNIX
Answer: A
QUESTION: 138Which methods can be used to identify which jobs are running? (Choose two.)
A. View the bpcd logB. Run bpclntcmd -psC. View the Activity MonitorD. Run bpdbjobs -reportE. Run nbemmcmd
Answer: C, D
QUESTION: 139Which conditions must be met for spanning to occur between BasicDisk storageunits? (Choose three.)
A. The storage units must exist on the same media server.B. The storage units must be in the same storage unit group.C. The maximum concurrent jobs level on the target storage unit must be equal to the
251-365
41 http://www.certmagic.com
source.D. The storage units must exist on different media servers.E. The maximum concurrent jobs level on the target storage unit must be lower than thesource.
Answer: A, B, C
QUESTION: 140For each volume pool, you need a complete list of tapes that shows the tape status.Which of the following will provide all of this information?
A. Tape List reportB. Tape Summary reportC. bpmedialist -allD. available_media
Answer: D
QUESTION: 141A restore must be performed. You have gone into the Backup Archive and Restore GUIand are trying to view the valid images for clientA but the following error occurs:WARNING: Server does not contain any valid images. Which options may be incorrectlyconfigured? (Choose three.)
A. Source client for restoresB. Destination client for restoresC. Server to use for backups and restoresD. Media server for restoreE. Policy types for restore
Answer: A, C, E
QUESTION: 142Which command will unsuspend a tape with a media ID of ABC123?
A. nbemmcmd -unsuspend -m ABC123B. bpmedia -unsusp -m ABC123C. unsuspend_media -m ABC123D. bpmedia -unsuspend -m ABC123
251-365
42 http://www.certmagic.com
Answer: D
QUESTION: 143Which command is used to expire all the images on a selected media ID?
A. bpexpireB. bpexpdateC. bpdeleteD. bpmedia
Answer: B
QUESTION: 144Which options are listed in the Detailed Status tab of backup jobs? (Choose three.)
A. Job PIDB. Master ServerC. Policy TypeD. Storage UnitE. Media Server
Answer: A, D, E
QUESTION: 145Which items can be found in the Activity Monitor window? (Choose four.)
A. ClientB. StatusC. Start timeD. Backup IDE. ThroughputF. Device name
Answer: A, B, C, E
QUESTION: 146An image, without duplication, on a tape has expired. The data from that image is required.How can you make that image available for restores?
251-365
43 http://www.certmagic.com
A. Run bpexpdateB. Run bpimportC. Restore from copy 2D. Change the primary copy
Answer: B
QUESTION: 147Consider the following: Your environment has one master server and six SAN mediaservers. The systems use Shared Storage Option (SSO) to share ten tape drives on a singlerobot. Backups run at night to various media servers and you want to duplicate all backupsduring the day. All duplications must run on the master server to free media serverresources. What would you do to allow the master server to perform all duplications?
A. Clear Drive Duplication Enabled in the Device Manager for SAN media servers.B. In the Vault policy, set Alternate Server Duplicate Disable for SAN media servers.C. Set an offsite volume pool for master server access only.D. Set an alternate read server in the Vault Management Properties tab.
Answer: D
QUESTION: 148You run a successful backup that begins at 8:00 p.m. on Friday and finishes at 3:00 a.m. onSaturday. You have set the frequency for this backup to be one day. You have an openwindow. When will the next backup on this schedule queue?
A. 8 p.m. FridayB. 8 p.m. SundayC. 3 a.m. SundayD. 8 p.m. Saturday
Answer: D
QUESTION: 149You are reviewing the available_media output. If the robot type is listed as NONE, the tapewould be _____.
251-365
44 http://www.certmagic.com
A. In the tape libraryB. In the tape driveC. Out of the tape libraryD. Out of the tape drive
Answer: C
QUESTION: 150Which function can you perform from the Backup, Archive, and Restore interface?
A. Preview amount of disk space required for the restore.B. Preview media required prior to the restore.C. Check permissions on the destination machine.D. Check available space on the destination.
Answer: B
QUESTION: 151Which options are listed in the Job Overview tab of backup jobs? (Choose two.)
A. EMM ServerB. Master ServerC. Policy TypeD. NOM ServerE. MB/Sec
Answer: B, C
QUESTION: 152Which report lists the backup ID?
A. Media WrittenB. Client BackupsC. Media SummaryD. Status of Backups
Answer: B
251-365
45 http://www.certmagic.com
QUESTION: 153A tape with media ID ABC001 is assigned to the Scratch volume pool. A policy isconfigured to use the NetBackup volume pool. The policy runs and media ID ABC001 isautomatically assigned to the NetBackup volume pool from the Scratch pool. All theimages on media ID ABC001 expire. In a default NetBackup 6.5 configuration, in whichvolume pool will media ID ABC001 appear?
A. ScratchB. DataStoreC. NetBackupD. None
Answer: A
QUESTION: 154Which statement is true about the NetBackup Support Utility (NBSU)?
A. NBSU can be invoked from the console by selecting Help-->Gather supportinformation.B. NBSU can be run on the master server to collect information on a remote media server.C. NBSU collects data on NetBackup as well as the operating system and hardware.D. NBSU will only function on NetBackup master servers and media servers.
Answer: C
QUESTION: 155You have the following NetBackup 6.5 environment: A prioritized storage unit group isconfigured with: (in the following order) basic disk storage unit tape storage unit that isconfigured with three DLT tape drives a policy that uses the storage unit group Whathappens if a backup is running and one of the disk storage units becomes full?
A. The backup will continue on the second disk storage unit on another media server ifdisk spanning is enabled.B. The backup will continue to a tape on the same media server.C. The backup will continue on the second disk storage unit on the same media server ifdisk spanning is enabled.D. The backup will fail because spanning is only allowed on tape storage units.
Answer: C
251-365
46 http://www.certmagic.com
QUESTION: 156A tape is automatically frozen when NetBackup attempts to use it for a policy backup.Which condition can cause this?
A. The tape is full.B. The tape has expired.C. The tape is already in use.D. The tape has been used for NetBackup catalogs.
Answer: D
QUESTION: 157Media ID ABC001 has been used to perform the full backups for client ClientA. The fullbackups have a retention of one month. The following table lists the tapes that are availableand the status of the tapes:
A new policy that has been configured to use the NetBackup volume pool, with aretention period of two weeks, starts to run. Which tape will be used for this backup?
A. Media ID ABC001B. Media ID ABC003C. Media ID ABC004D. Media ID ABC005
Answer: D
QUESTION: 158Which factors affect the physical expiration of media? (Choose two.)
A. DateB. Media fullC. Number of mounts
251-365
47 http://www.certmagic.com
D. Media being moved to a new serverE. Changing the backup retention level
Answer: A, C
QUESTION: 159Media server A has performed a backup of ClientB. You need to perform a restore of datato ClientB and media server A is currently busy doing backups. Which setting in hostproperties can be changed under the General Server tab?
A. Alternate client restoreB. Media host overrideC. Media host overwriteD. Alternate server restore
Answer: B
QUESTION: 160A suspended backup job writing to a basic disk storage unit is resumed and the basic diskstorage unit has already reached its maximum concurrent job limit with other jobs. Whatwill happen with the backup job, assuming the basic disk storage unit is unavailable to adisk storage group?
A. The backup will stay queued until a job finishes.B. The backup will fail with the storage unit unavailable.C. The backup will continue backup to a spanned disk.D. The backup will prompt for a different basic disk storage unit.
Answer: A
QUESTION: 161Netbackup 6.5 is configured with a disk storage unit with staging enabled. Some of theimages in the disk storage unit have been successfully duplicated. The disk storage unitbecomes full. What happens next?
A. Duplicated images are purged until the disk storage unit can hold the next backup.B. Duplicated images are purged until 98% below the disk capacity has been reached.C. Duplicated images are purged until the high water mark has been reached.D. Duplicated images are purged until the lower water mark has been reached.
251-365
48 http://www.certmagic.com
Answer: D
QUESTION: 162Which logs are typically used to determine the performance of a backup to a tapedrive over the network? (Choose two.)
A. bprdB. bpcdC. bptmD. bpbkar(32)E. bpdm
Answer: C, D
QUESTION: 163A NetBackup administrator added NEW_STREAM to the file list to have three streamsfor a policy, but it still only uses one stream. What should you do?
A. Select Allow multiplexing.B. Select Allow multiple data streams.C. Set Maximum Streams to 3 in the policy.D. Change NEW_STREAM to ALLOW_NEW_STREAM.
Answer: B
QUESTION: 164Exhibit
251-365
49 http://www.certmagic.com
Based on the configuration shown in the exhibit, what is the maximum possiblethroughput for the tape library?
A. 7 MB/secB. 9 MB/secC. 14 MB/secD. 18 MB/secE. 28 MB/sec
Answer: C
QUESTION: 165Which log do you monitor to determine if multiplexing could improve performance?
A. bptmB. bprdC. nbjobD. nbpem
Answer: A
QUESTION: 166Given the following scenario about a policy with a single client: Allow Multiple DataStreams is enabled. ALL_LOCAL_DRIVES is specified. Three tape drives are available inthe storage unit. Max Jobs Per Client is set to 2. The client specified has five local filesystems with no exclude list. How many backup jobs will be active (versus queued) afterthe policy successfully initiates?
A. 1B. 2C. 3D. 5
Answer: B
QUESTION: 167In which areas of NetBackup do you configure multiplexing? (Choose two.)
251-365
50 http://www.certmagic.com
A. Policy AttributesB. Global AttributesC. Policy SchedulesD. Storage Unit ConfigurationE. Host Properties
Answer: C
QUESTION: 168The ALL_LOCAL_DRIVES directive is selected as a backup selection of a Windowsclient. Multiple data streams are enabled. There is one client in the client list. What is thebehavior of NetBackup?
A. All locally mounted file systems are backed up with each file system constituting aseparate backup job and Shadow Copy Components:is included in the backup of C:\ .B. All locally mounted file systems are backed up with each file system constituting aseparate backup job and Shadow Copy Components:is a separate job.C. All locally mounted file systems are backed up with all file systems constituting asingle backup job and Copy Components:is included in the backup of C:\ .D. All locally mounted file systems are backed up with all file systems constituting asingle backup job and Copy Components:is a separate backup in the image:
Answer: B
QUESTION: 169Which factors can determine the number of data streams that can run concurrently?(Choose three.)
A. Available devicesB. Network bandwidthC. Multiplexing settingD. MAX_STREAMS settingE. Maximum jobs per client setting
Answer: A, C, E
QUESTION: 170Given the following information about a policy with a single client: Allow Multiple DataStreams is enabled. ALL_LOCAL_DRIVES is specified. Media multiplexing is set to 3.
251-365
51 http://www.certmagic.com
Two tape drives are available in the storage unit and MPX per drive is 2. Max Jobs perClient is set to 8. The client has five local file systems with no exclude list. How manybackups will be active (versus queued) after the policy is successfully invoked?
A. 2B. 4C. 5D. 6
Answer: B
QUESTION: 171Which NetBackup settings are used on a media server for performance tuning? (Choosetwo.)
A. UPDATE_INTERVALB. REFRESH_INTERVALC. SIZE_DATA_BUFFERSD. NUMBER_DATA_BUFFERSE. DENSITY_DATA_BUFFERS
Answer: C, D
QUESTION: 172Which value would you enter into the SIZE_DATA_BUFFERS file to set your data buffersize to 64 KB?
A. 64B. 64KC. 64000D. 65536
Answer: D
QUESTION: 173Given the following scenario about a policy with a single client: Allow Multiple DataStreams is enabled. ALL_LOCAL_DRIVES is specified. One tape drive is available in thestorage unit. MPX for the storage unit is set to the default value. Max Jobs Per Client is setto 5. Media Multiplexing in the Schedule is set to 5. The client specified has five local file
251-365
52 http://www.certmagic.com
systems with no exclude list. How many backup jobs will be active (versus queued) afterthe policy successfully initiates?
A. 1B. 2C. 3D. 5
Answer: A
QUESTION: 174The latest maintenance pack has just been applied to your Microsoft Windowsmaster server. Where can you validate that it was installed successfully?
A. install_path\NetBackup\bin\support\log\packageB. install_path\NetBackup\bin\support\log\patchC. install_path\NetBackup\log\packageD. install_path\NetBackup\log\patch
Answer: D
QUESTION: 175After replacing a tape drive on a Windows media server, where can you confirm theoperating system is seeing the device?
A. Device ManagerB. Device ConfigurationC. Device TreeD. Device Drive
Answer: A
QUESTION: 176Which command can you use to bring a down drive to an up state?
A. vmupB. vmcheckC. vmoprcmd
251-365
53 http://www.certmagic.com
D. vmcheckxxx
Answer: C
QUESTION: 177You are checking the status of a standalone drive in Device Monitor. The Control columnstatus reads AVR and the Ready column status is No. What does this indicate?
A. The drive is down.B. The drive is up under operator control.C. The drive is up, but no tape is currently in the drive.D. The drive is up, but the tape in the drive is suspended.
Answer: C
QUESTION: 178Where can you run NetBackup LiveUpdate policies?
A. Only from the master server.B. From the server where release updates are stored.C. Only from the EMM server.D. From the master server, the media server, and the client.
Answer: A
QUESTION: 179If backing up to a disk storage unit and the disk is full, how do you specify a new diskbackup location?
A. Modify the policy to point to a new disk volume for backups.B. Change the volume location in the Device and Media Manager location.C. Create a new disk storage unit to point to a new location and modify the policy. D. Media Manager will automatically allocate space from the disk scratch pool.
Answer: C
QUESTION: 180Which setting determines the retry behavior of a backup job?
251-365
54 http://www.certmagic.com
A. Policy attributes-->Job try intervalB. Schedule attributes-->Job try intervalC. Master server host properties-->Schedule backup attemptsD. Media server host properties-->Schedule backup attempts
Answer: C
QUESTION: 181Which requirement must be met to add a new media server?
A. You must have a 64-bit OS platform.B. You must have a minimum of 256 MB of memoryC. You must have an Intel Pentium system running with a minimum of 125 MB ofmemory.D. You must have Internet Explorer 6.0 or later.
Answer: B
QUESTION: 182A site is running the following: NetBackup master server 6.5 NOM 6.5 NetBackup clients6.5, 6.0, and 5.1 You want to upgrade the site to the next patch level for the 6.5 clients.What is correct method for updating the clients that are running 6.5 to the latest release?
A. Install the patch on the master server, the 5.1 clients, and then the 6.5 clients.B. Install the patch on the master server, the NOM server, and then the 6.5 clients.C. Install the patch on the master server, the NOM server, the 6.0 clients, and then the 6.5clients.D. Install the patch on the 6.5 clients only.
Answer: B
QUESTION: 183Which command is used to show tape drive status?
A. nbemmcmdB. tpautoconfC. vmoprcmdD. scan
251-365
55 http://www.certmagic.com
Answer: C
QUESTION: 184How do you ensure that your policies are backing up all volumes/file systems on allof your clients?
A. Use bp_testallB. Use bpconfirmC. Use check_coverageD. Check the Backup_All option in every policy
Answer: C
QUESTION: 185You are adding two more tape drives to an existing library with two tape drives. Eventhough the new devices have been successfully configured in NetBackup, NetBackupcontinues to use only two tape drives. Which is a possible cause of the problem?
A. Tape drive locationB. Storage unit definitionC. Storage unit group definitionD. Storage unit group prioritization
Answer: B
QUESTION: 186A user backup must be performed from the client every Friday night. What does theNetBackup administrator need to do to accomplish this?
A. Create a User Backup policy type.B. Create a User Backup schedule.C. Create a Full Backup schedule with user backup permissions allowed.D. Create a User Backup schedule and use Frequency to allow the backup on Friday.
Answer: B
QUESTION: 187
251-365
56 http://www.certmagic.com
If the hardware supports it, which function can be used for automated tape drive cleaning?
A. TdcleanB. TapeAlertC. DriveAlertD. Drive_clean
Answer: B
QUESTION: 188How can a NetBackup system administrator add clientA to an existing PolicyA?
A. Modify PolicyA Backup Selections and add a backup selection called clientA.B. Modify PolicyA Schedules and add a new schedule called clientA.C. Modify PolicyA Clients and add a new client called clientA.D. Modify PolicyA Attributes and select Backup Network Clients.
Answer: C
QUESTION: 189You have a Windows NetBackup client running NetBackup 6.0 MP3 and a supporteddatabase. You are upgrading this client and database agent to 6.5 without usingLiveUpdate.What is required to upgrade to the 6.5 client?
A. Load and patch the database agent and then the client.B. Load and patch the client and then the database agent.C. Load and patch the client, which includes the database agent.D. Load and patch the client and then run the update command.
Answer: C
QUESTION: 190When adding a new tape library, NetBackup fails to recognize the mail slot (media accessport). What should you do first to determine the cause of the problem?
A. Update the tape library firmware.B. Update the tape drive firmware.C. Contact the tape library vendor to determine if the tape library is supported byNetBackup.
251-365
57 http://www.certmagic.com
D. Refer to the Veritas NetBackup Hardware Compatibility list to determine if the tapelibrary is supported.
Answer: D
QUESTION: 191How do you initiate a LiveUpdate policy from the NetBackup Administration console?
A. File-->LiveUpdateB. Actions-->LiveUpdateC. Policy-->policy_nameD. LiveUpdate-->Run
Answer: A
QUESTION: 192After replacing a tape drive, which command should be run to update the NetBackupdevice configuration?
A. tpautoconfig -replace_driveB. tpconfig -replace_driveC. tpautoconf -replace_driveD. tpdriveconfig -replace_drive
Answer: C
QUESTION: 193A NetBackup client that is the only client in a single policy will have maintenanceperformed on Friday night and will be down the entire night. It is unnecessary to runbackups until Saturday night. What can you do to have backups for this client skip Fridaynight and run on Saturday night?
A. Deactivate the policy.B. Modify the policy Active Go into effect at date.C. Modify the policy Deactivate policy until date.D. Allow the policy to run and ignore the failure for Friday night.
Answer: B
251-365
58 http://www.certmagic.com
QUESTION: 194A new LAN has been set up to offload a portion of backup traffic from the productionnetwork. To differentiate between the two networks, all hosts on the backup network havebeen given a -bkup suffix. One media server and all of its backup clients have beenconfigured to access this backup network. What should be done to ensure backup trafficuses the new backup network? (Choose two.)
A. Configure the option Use specified network interface on each client to specify the -bkup host name of the media server.B. Configure the option Use specified network interface on the media server to specify itsown -bkup host name.C. Add the -bkup host name of the media server to the NetBackup server list on eachclient.D. Add the -bkup host name of each client to the client list on the media server.E. Change the name of the media server to the -bkup host name using the Change serverfunction in the console.
Answer: B, C
QUESTION: 195There is a NetBackup 6.5 master server running Microsoft Windows 2003. Which actionsmust be performed to back up a Redhat AS 3 client? (Choose two.)
A. Install the NetBackup 6.5 media server software for Linux on the client.B. Install the NetBackup 6.5 for Linux client software on the client.C. Create an Linux policy type and add the Linux client name to the client list.D. Create a standard policy type and add the Linux client name to the client list.E. Install NetBackup 6.5 for Linux using the Install Client GUI on the master server.
Answer: B, D
QUESTION: 196The NetBackup system administrator wants to add four new clients to an exsisting policy.After adding the new clients to the policy's Clients tab, the Hardware and OperatingSystem is undetected. What does the NetBackup system administrator need to do?
A. Enable Collect disaster recovery information.B. Enable Detect operating system when adding new clients or changing a client.C. Enable Auto detect client hardware and operating system in the host properties.
251-365
59 http://www.certmagic.com
D. Enable Use random port assignments in the host properties.
Answer: B
QUESTION: 197In which areas in the NetBackup Administration console can you find throughput of abackup?(Choose three.)
A. CatalogB. ReportsC. Device MonitorD. Activity MonitorE. Debug Logs
Answer: B, D, E
QUESTION: 198Given the following information about a policy with a single client: Allow Multiple DataStreams is enabled. ALL_LOCAL_DRIVES is specified, and media multiplexing is set to6. Three tape drives are available in the storage unit and MPX per drive is 2. Max Jobs perClient is set to 8. The client has five local file systems with no exclude list. How manybackups will be active (versus queued) after the policy is successfully invoked?
A. 2B. 5C. 6D. 8
Answer: B
QUESTION: 199In which areas of a backup policy can you configure multiple data streams?
A. Attributes and Backup SelectionsB. Attributes and ClientsC. Backup Selections and ClientsD. Backup Selections and Schedules
251-365
60 http://www.certmagic.com
Answer: A
QUESTION: 200Multiple data streams are configured and there is a policy with four items in the file list.Storage units are set up to allow multiple drives to be used concurrently, but only one job isgoing active at a time. On the master server, which attribute and setting must be set to avalue greater than one?
A. Global Attributes-->Maximum jobs per clientB. Global Attributes-->Maximum jobs per policyC. Policy Attributes-->Maximum jobs per clientD. Policy Attributes-->Maximum jobs per policy
Answer: A
QUESTION: 201You are configuring a NetBackup environment where there is only one tape driveavailable. How many backup streams will be multiplexed if: The storage unit multiplexsetting is 6 The schedule multiplex setting is 4 Ten backup jobs initiate from that schedule
A. 1B. 4C. 6D. 10
Answer: B
QUESTION: 202Which settings must be configured for multiplexing to function? (Choose two.)
A. Storage Unit Groups-->Maximum streams per driveB. Storage Unit-->Maximum streams per driveC. Master Server Host Properties-->Global Attributes-->Maximum jobs per clientD. Backup Policy-->Schedule-->Media multiplexingE. Volume Pools-->Maximum Multiplexing per volume
Answer: B, D
QUESTION: 203
251-365
61 http://www.certmagic.com
What is the NetBackup daemon that is responsible for reading and writing to the masterserver's catalogs?
A. nbemmB. nbpemC. bpdbjobsD. bpdbm
Answer: D
QUESTION: 204Your tape library has just had the robot firmware upgraded and now the robot is readingthe bar codes with additional characters. Which rule can be set up to have NetBackup usethe same characters as before the firmware upgrade occured?
A. MediaID generation ruleB. MediaID creation ruleC. MediaID barcode ruleD. MediaID setup rule
Answer: A
QUESTION: 205What are the rollover mode options in unified logs?
A. File size, elapsed time, time of dayB. File size, verbose level, number of logsC. File size, originator setting, time of dayD. File size, product ID, number of logs
Answer: A
QUESTION: 206You lost all of your NetBackup catalogs and need to recover. Your NetBackup system isup with an empty EMM database. Before recovering your catalog, you must _____.(Choose three.)
A. Configure the tape drivesB. Configure the storage unit
251-365
62 http://www.certmagic.com
C. Inventory the libraryD. Move the required media for recovery into the CatalogBackup poolE. Create a NBU-Catalog policyF. Locate the catalog recovery file
Answer: A, C, F
QUESTION: 207You attempt a catalog backup that fails with Status Code 180: cannot overwrite media, dataon it is protected. You determine that this is the correct media and want to overwrite it.Which option should you change?
A. ALLOW_MEDIA_OVERWRITEB. ALLOW_CATALOG_OVERWRITEC. MEDIA_OVERWRITE_ALLOWD. CATALOG_OVERWRITE_ALLOW
Answer: A
QUESTION: 208After installing NetBackup client software on a new client, backups fail with a status codeindicating that NetBackup is unable to communicate with the client. Which action can youtake to pinpoint the source of the problem?
A. Verify that the NetBackup client is listening.B. Verify that the bptm process is running on the client.C. Check the bprd log to verify that the backup has initiated.D. Check that the bpbkar process is running.
Answer: A
QUESTION: 209You review your backup reports and find that last night, a large number of backup jobsfailed with status code 196. What could cause this status code?
A. The supply of available media was exhausted.B. One or more clients failed to respond.C. Heavy network congestion caused timeouts.D. The backup window closed before all backups completed.
251-365
63 http://www.certmagic.com
Answer: D
QUESTION: 210You have the following configuration: NBU master server: Mas-server NBU mediaserver: Med-server Mas-server and Med-server are configured to share four tape drives.Mas-server is the robot control host. There is a problem with the tape library and you needto run robtest. On which system would you run robtest?
A. Mas-server onlyB. Med-server onlyC. EMM server onlyD. Mas-server or Med-server
Answer: A
QUESTION: 211Which functions are performed by the vxlogcfg command? (Choose three.)
A. Displays log settings for an originatorB. Copies log filesC. Lists configured productsD. Shows log files for an originatorE. Manages rollover mode
Answer: A, C, E
QUESTION: 212Which command is used to verify that NetBackup and Media Manager processes arerunning?
A. bppsB. bpproclistC. bpbackupD. bpprocess
Answer: A
251-365
64 http://www.certmagic.com
QUESTION: 213Which NetBackup process is responsible for reading data from the client during a backup?
A. bprdB. bpcdC. bpbkarD. tar
Answer: C
QUESTION: 214Which command on UNIX or Windows clients can you use to verify basic client-to-masterserver communications?
A. nbdb_pingB. bpclientC. bpclntcmdD. vnetdcmd
Answer: C
QUESTION: 215You are performing a disaster recovery of a NetBackup master server to a new system.Another person has configured the system to run the NetBackup database recovery. Therecovery is run and you receive the following error message: The following DR mediacould not be located in NetBackup database. Please insert the following media and run thevolume configuration wizard or the vmupdate command to update the NetBackupdatabase.
You locate the barcode in NetBackup and find the media ID has been set to P847S1. Allmedia IDs are in a similar format. The library has 200 tapes and you do not know howmany DR tapes you need. What can you do to guarantee the tapes will be found?
A. Note the slot number of GBP847S1, delete it and add it back in manually asmedia ID GBP847, and then run the recovery.B. Delete all of the tapes and set the Media ID generation rule, reinventory the library,and then run the recovery.
251-365
65 http://www.certmagic.com
C. Use robtest to mount the media and run the recovery manually.D. Use tpreq to mount the media and run the recovery manually.
Answer: B
QUESTION: 216Which logs are useful to enable on the client? (Choose two.)
A. nbproxyB. bpcdC. nbpemD. bpbkarE. bpbrm
Answer: B, D
QUESTION: 217You want to keep master server debug logs for five days. Which host properties tabdo you use to configure the duration to retain logs?
A. ServersB. LoggingC. Global AttributesD. Universal SettingsE. Clean-up
Answer: E
QUESTION: 218Which commands can help resolve NetBackup network problems? (Choose three.)
A. PingB. bpverifyC. nbclntcmdD. nslookupE. bpclntcmd
Answer: A, D, E
251-365
66 http://www.certmagic.com
QUESTION: 219A job has been waiting for a DLT tape to mount in a library for an extended periodof time. Which process has failed to run?
A. tlprdB. bpdmC. bptmD. tldcd
Answer: D
QUESTION: 220You have recovered all of your NetBackup catalogs using the GUI, which has used theonly two catalog backup tapes. The recovery has been successful. A number of backupshave taken place and a catalog backup is run automatically. The catalog backup fails withan error code 96. You investigate and find that all of the tapes have been allocated. What isthe cause of this error?
A. The catalog recovery freezes the tapes.B. The catalog recovery suspends the tapes.C. The catalog recovery places them into a different volume pool.D. The catalog recovery expires the tape within Media Manager.
Answer: A
QUESTION: 221Your NetBackup master server is named hostA and has an IP address of 192.168.1.1.Which command do you run from a client to test reverse lookup?
A. bpclntcmd -ip hostAB. bpclntcmd -hn hostAC. bpclntcmd -hn 192.168.1.1D. bpclntcmd -ip 192.168.1.1
Answer: D
QUESTION: 222Which command can be used to display information about the tape library?
251-365
67 http://www.certmagic.com
A. Scan -changerB. Scan -tapeC. tpconfig -changerD. tpconfig -tape
Answer: A
QUESTION: 223A NetBackup system administrator is trying to restore the NetBackup catalogs after a harddisk crash. Which command is used to restore the NetBackup catalogs?
A. bprestoreB. bprecoverC. dbrestoreD. dbrecoverE. nbdbrecover
Answer: B
QUESTION: 224After replacing a tape drive, which NetBackup command can you run to verify theoperating system is seeing the new tape drive?
A. Scan -allB. Scan -osC. Tape -scanD. Tape -config
Answer: A
QUESTION: 225In NetBackup and Media Manager, which are allowable configurations? (Choose two.)
A. Storage unit media type=DLT, device=DLT, robot=TLDB. Storage unit media type=DLT2, device=DLT, robot=TLDC. Storage unit media type=DLT2, device=DLT2, robot=TL8D. Storage unit media type=DLT2, device=DLT2, robot=TLDE. Storage unit media type=DLT4, device=DLT4, robot=TLD
251-365
68 http://www.certmagic.com
Answer: A, D
QUESTION: 226In the Device Monitor Control column, which entry indicates that a SDLT driveunder robotic control is up and available to Media Manager?
A. AVRB. TLDC. OPRD. UP-TLD
Answer: B
QUESTION: 227How would a NetBackup system administrator remove a client from Clients underHosts Properties?
A. Remove the client from all policies.B. Delete the client from Clients under Hosts Properties.C. Deactivate any policy the client is in.D. Remove client from the list of available clients.
Answer: A
QUESTION: 228In which directory is it possible to create aliases for NetBackup clients?
A. aliasesB. altnamesC. peernamesD. altpath
Answer: B
QUESTION: 229Which command can you use to list the media contents of a robot?
251-365
69 http://www.certmagic.com
A. vmcheckB. tpconfigC. vmoprcmdD. vmcheckxxx
Answer: D
QUESTION: 230Which utility lets you view contents of the media access port on a TLD robot?
A. robtestB. vmqueryC. tpconfigD. tpautoconf
Answer: A
QUESTION: 231How do you install a release update on the master server using LiveUpdate?
A. File-->LiveUpdate-->Master ServerB. Run the nbliveup commandC. Right-click the master and select Scan for updatesD. Manually patch the master
Answer: B
QUESTION: 232You are removing a media server from a NetBackup 6.5 environment. Which actionsare performed prior to shutting down the media server? (Choose two.)
A. Use bpmedia with the moveDB option to migrate media IDs from their mediaDB to the master's media DB.B. Remove the media server's volume database using the Device Configuration GUIon the master serverC. Remove the master server from the media server list.D. Remove the storage unit reference to this media server from the master server'sconfiguration.E. Remove the media server host name from the master server list.
251-365
70 http://www.certmagic.com
Answer: A, D
QUESTION: 233In a policy with several clients, sometimes mission-critical client systems fail to start abackup within their start window. It may take several months before additional backupresources can be installed. No job priorities are currently configured. What should be doneto ensure that mission-critical client systems are backed up before other clients?
A. Create a new policy for the mission-critical clients and set the job priority to 99in the Policy Attributes.B. Create a new policy for the mission-critical clients and set the job priority to 0 inthe Policy Attributes.C. Select Host Properties-->Universal Settings on each mission-critical client and setthe job priority to 99.D. Select Host Properties-->Universal Settings on each mission-critical client and setthe job priority to 0.
Answer: A
QUESTION: 234SCSI Persistent Reserve should be _____.
A. Used with all tape drives.B. Combined with SCSI Primary Command SCSI-2 (SPC-2) RESERVE.C. Enabled on all media servers.D. Disabled on selective media servers, depending on the operating system being used.
Answer: C
QUESTION: 235How do you define a new storage server?
A. Run the Configure Disk Pool wizard from the GUI.B. Run nbdevconfig -creatests from a command line.C. Create a storage unit, which automatically defines the storage server.D. Right-click Storage Servers in the console and select New.
251-365
71 http://www.certmagic.com
Answer: B
QUESTION: 236A customer has a large image catalog and their data changes very little from day to day.They have a large backup window once a week for catalog backups and small backupwindows on the other days of the week. In addition to Full, which other schedule typeshould you use to back up the catalogs?
A. Cumulative Incremental BackupB. Differential Incremental BackupC. User Incremental BackupD. Differential Catalog Backup
Answer: B
QUESTION: 237During a Windows installation, the NetBackup LiveUpdate agent is installed, by default,on the _____.
A. Master server onlyB. Master server and the media server onlyC. Master server, the media server, and the clientD. Media server and client only
Answer: C
QUESTION: 238Where in the media server host properties would you configure the number of retries forrestores?
A. Universal Settings-->Retry intervalsB. General Server-->Restore retriesC. Universal Settings-->Restore retriesD. General Server-->Restore intervals
Answer: C
QUESTION: 239Which policy types are used for NetWare server NSS volume backup? (Choose two.)
251-365
72 http://www.certmagic.com
A. NovellB. NetWareC. AFSD. NSS volumeE. Standard
Answer: B, E
QUESTION: 240Which setting affects the maximum number of destinations configurable in a storagelifecycle?
A. Host Properties-->Global Attributes-->Maximum backup copiesB. Host Properties-->Universal Settings-->Maximum backup copiesC. Host Properties-->General Server-->Maximum backup copiesD. Host Properties-->Servers-->Maximum backup copies
Answer: A
QUESTION: 241Which functions can be performed with a tpconfig command? (Choose two.)
A. Add and display disk paths.B. Add and configure robots.C. Display the current media status.D. Display robot and tape drive configuration.E. Display robot status.
Answer: B, D
QUESTION: 242How do you set up disk spanning to allow backups to span multiple BasicDiskstorage units? (Choose two.)
A. Select Host Properties-->Media Servers-->Media-->Allow backups to span disks.B. Select Storage Units-->Storage Unit-->Allow backup to span disks.C. Configure a storage unit group and add all disk storage units regardless of mediaserver.
251-365
73 http://www.certmagic.com
D. Configure a storage unit group that consists of only disk storage units defined ona single media server.E. Confirm Round Robin storage unit is selected at the group level.
Answer: A, D
QUESTION: 243How do you configure Maximum Partially Full (MPF) of volumes?
A. Through storage groupsB. Through storage unitsC. Through volume groupsD. Through volume pools
Answer: D
QUESTION: 244How can new volumes be added to an existing AdvancedDisk storage pool, with theminimal impact on the environment?
A. Run the Configure Disk Pool wizard to modify the existing pool.B. Right-click the disk pool and select Change and then select Add Volumes.C. Create a disk pool for the new volumes and merge it with the existing pool.D. Delete the disk pool and then recreate it to include the new volumes.
Answer: C
QUESTION: 245You have enabled Multiple Data Streams for a Windows 2003 client policy. Which file listbacks up all local volumes C:\, D:\, and E:\ and the Shadow Copy Components using onlythree streams?
A. ALL_LOCAL_DRIVES Shadow Copy Components:\B. C:\ Shadow Copy Components:\ NEW_STREAM D:\ NEW_STREAM E:\C. NEW_STREAM ALL_LOCAL_DRIVES NEW_STREAM Shadow CopyComponents:\D. NEW_STREAM C:\ Shadow Copy Components:\ NEW_STREAM D:\NEW_STREAM E:\
251-365
74 http://www.certmagic.com
Answer: D
QUESTION: 246Which types of tapes are barcode rules commonly used to define? (Choose two.)
A. Cleaning tapesB. Catalog tapesC. Catstore tapesD. Cartridge tapesE. Scratch tapes
Answer: A, E
QUESTION: 247Your NetBackup 6.5 environment has two tape libraries: Library A and Library B. LibraryA contains SuperDLT tape drives. Library B contains Ultrium tape drives and SuperDLTtape drives. What is the minimum number of storage units required to use all tape devices inboth tape libraries?
A. 1B. 2C. 3D. 4
Answer: C
QUESTION: 248Which retention types are available in storage lifecycles?
A. Static, variable capacity managed, and try-to-keepB. Fixed, staged capacity managed, and expire after duplicationC. Defined, variable capacity managed, and try-to-keepD. Conditional, staged capacity managed, and expire after duplication
Answer: B
QUESTION: 249How do you limit administrative privileges for the NetBackup Administrative console on a
251-365
75 http://www.certmagic.com
media server?
A. Add the media server name to the server list.B. Remove the media server from the server list and add the media server name to themedia server list.C. Add the media server name to the media server list and media server name to theserver list.D. Remove the media server name from both server lists.
Answer: B
QUESTION: 250You have implemented Maximum Partially Full (MPF) for a volume pool and have thefollowing: Two media servers named serverA and serverB One volume pool MPF set to 4Tapes at the following retention levels:
You start a backup to serverA that will use four tape drives at a retention level of 1month. There are four tape drives available. Without using media sharing, what willhappen?
A. One job will go active; three jobs will queue.B. Two jobs will go active; two jobs will queue.C. Three jobs will go active; one job will queue.D. Four jobs will go active; zero jobs will queue.
Answer: C
QUESTION: 251What is configured when adding a new tape device within NetBackup? (Choose three.)
A. Drive typeB. Drive residenceC. Drive firmwareD. Drive name
251-365
76 http://www.certmagic.com
E. Drive status
Answer: A, B, D
QUESTION: 252The nbj.conf (UNIX) and the setconf.bat (Windows) files define the defaults portsfor VNETD and BPJAVA. What is the port number for VNETD?
A. 1556B. 13701C. 13724D. 13742
Answer: C
QUESTION: 253What is the default media multiplexing level on a policy schedule?
A. 0B. 1C. 2D. 99
Answer: B
QUESTION: 254What is the default number of hours that a failed backup job can remain in an Incompletestate prior to being moved to a Done state?
A. 1 hourB. 3 hoursC. 12 hoursD. 24 hours
Answer: B
QUESTION: 255By default, how long is true image restore information kept on disk?
251-365
77 http://www.certmagic.com
A. 12 hoursB. 36 hoursC. 1 dayD. 3 days
Answer: C
QUESTION: 256Which commands can be used to verify robot communication? (Choose three.)
A. vmchangeB. tpautoconfigC. robtestD. scanE. vmglob
Answer: A, C, D
QUESTION: 257Which options can be selected in the policy schedule to perform a monthly Syntheticbackup? (Choose two.)
A. Differential Incremental BackupB. Cumulative Incremental BackupC. Full BackupD. Synthetic FullE. Synthetic Month
Answer: B, C
QUESTION: 258Where in a policy do you set the job priority?
A. SchedulesB. AttributesC. ClientsD. Backup Selection
251-365
78 http://www.certmagic.com
Answer: B
QUESTION: 259Which is the recommended policy type used for configuring a Microsoft Windows 2003client?
A. StandardB. MS-WindowsC. MS-Windows-NTD. MS-Windows-2003
Answer: C
QUESTION: 260Where would you add an include list for a Windows client in Host Properties?
A. Client properties-->Windows clients-->Exclude List Exclude List areaB. Client properties-->Windows clients-->Include List Include List areaC. Client properties-->Windows clients-->Exclude List Exceptions to the Exclude List areaD. Client properties-->Windows clients-->Include List Exceptions to the Exclude List area
Answer: C
QUESTION: 261Which of the following are options when configuring a frequency-based policyschedule? (Choose three.)
A. MinutesB. HoursC. DaysD. WeeksE. MonthsF. Years
Answer: B, C, D
QUESTION: 262The NetBackup system administrator has been tasked to configure a policy with multipletape copies enabled. Where would this be done?
251-365
79 http://www.certmagic.com
A. From the Attributes tab, enable Allow multiple data streams.B. From the Clients tab, add the host name and IP address of the client.C. From the Schedules tab, add a new schedule and enable Multiple copies.D. From the Schedules tab, enable Increase media multiplexing.
Answer: C
QUESTION: 263The NetBackup system administrator has been tasked with creating a policy for aWindows client. The client has millions of small files on the system and needs the abilityto restore a single file. Which policy type should the administrator use?
A. Raw-partitionB. Raw-partition-WindowsC. FlashBackupD. FlashBackup-Windows
Answer: D
QUESTION: 264What should you do after NetBackup media server is installed?
A. Make sure you have restarted services on the EMM server.B. Make sure you have a server license key.C. Make sure you have enough disk space for the catalogs.D. Make sure you can communicate with the tape devices.
Answer: D
QUESTION: 265Which port is used by vnetd on both UNIX and Windows clients?
A. 13720B. 13721C. 13723D. 13724
251-365
80 http://www.certmagic.com
Answer: D
QUESTION: 266As part of a hot catalog backup, which NetBackup components are backed up? (Choosethree.)
A. EMM databaseB. Image databaseC. NOM databaseD. configuration filesE. hosts file
Answer: A, B, D
QUESTION: 267In the NetBackup Administration console, where do you specify user administrationpermissions?
A. Master Server Properties-->SecurityB. Master Server Properties-->AuthenticationC. Master Server Properties-->PermissionsD. Master Server Properties-->Authorization
Answer: D
QUESTION: 268Which NetBackup 6.5 feature can be deselected during a Microsoft Windows 2003 mediaserver custom installation?
A. Veritas Snapshot ProviderB. Veritas Vault OptionC. Veritas NetBackup for Microsoft Exchange ServerD. Veritas NetBackup for Microsoft SQL Server
Answer: A
QUESTION: 269Which commands can be used to verify that NetBackup was installed with the correctmaster, media, and EMM server entries?
251-365
81 http://www.certmagic.com
A. bpgetconfig SERVER bpgetconfigEMMSERVER nbemmcmd -listhosts-verboseB. bpgetconfig -g MASTER bpgetconfig -gEMMSERVER nbemmcmd -listhosts-verboseC. nbemmcmd -listhosts -verbose bpgetconfigEMMSERVER nbemmcmd-listserverD. nbemmcmd -listsettingsnbemmcmd –listserverbpgetconfig SERVERE. nbemmcmd -listserverbpgetconfig -g MASTERbpgetconfig -g EMMSERVER
Answer: A
QUESTION: 270Which processes can run on a media server? (Choose three.)
A. bpbrmB. bpdmC. bprdD. bpdbmE. bptm
Answer: A, B, E
QUESTION: 271Which versions of the UNIX clients are supported by Netbackup 6.5? (Choose three.)
A. Solaris 7.0B. Solaris 8.0C. Solaris 10.0D. HP-UX 11.0E. AIX 4.3.3F. AIX 5.0
251-365
82 http://www.certmagic.com
Answer: B, C, D
QUESTION: 272Consider the following: A heavily-used file server must be configured as a NetBackupclient. The server is in production around-the-clock. Backups must have little effect onclient disk I/O and CPU. The client data exists on SAN-attached disks. Which NetBackupmethod would best fit this scenario?
A. Raw partitionB. Off-host backupC. Copy on write snapshotD. Mirror snapshot
Answer: B
QUESTION: 273What are functions of the EMM server? (Choose three.)
A. It provides a decentralized data store.B. It provides a centralized data store.C. It manages the allocation of resources.D. It communicates with media servers.E. It stores the image catalog.
Answer: B, C, D
QUESTION: 274You have a NetBackup installation where the master and EMM servers are two separateservers. Which NetBackup components are found on the EMM server?
A. nbemm, nbproxy, pbx, nbrbB. nbemm, nbjm, pbx, nbproxyC. nbemm, pbx, nbrb, nbjmD. nbemm, nbproxy, nbrb, nbjm
Answer: A
QUESTION: 275
251-365
83 http://www.certmagic.com
When installing NetBackup 6.5, which documents should be reviewed before installing theapplication? (Choose three.)
A. Release NotesB. Hardware Compatability GuideC. Hardware Supported ListD. Operating System Compatability GuideE. Operating System Supported List
Answer: A, B, D
QUESTION: 276Which NetBackup 6.5 option can perform and provide: Automatic ejection of tapesAutomatic duplication of images Detailed reports for managing offsite tape rotations
A. NetBackup OffsiteB. NetBackup CopyC. NetBackup VaultD. Multiple Copy
Answer: C
QUESTION: 277What is the minimum supported client version for NetBackup 6.5?
A. 3.4B. 4.5C. 4.5 FP6D. 5.x
Answer: D
QUESTION: 278Which statements are true about a media server upgrade from version 6.0 to version 6.5?(Choose three.)
A. All clients must be on 6.5 if their media server is on 6.5.B. The media server must be on 6.5 or 6.0 if the clients are on 5.1.C. The media server must be on 6.5 or 6.0 if the clients are on 6.0.
251-365
84 http://www.certmagic.com
D. The master server can be upgraded to 6.5 and media servers can remain at 6.0.E. The media server can be upgraded to 6.5 and the master server can remain at 6.0.
Answer: B, C, D
QUESTION: 279Which NetBackup report enables you to quickly determine the number of active, full,suspended, and frozen volumes on a given server?
A. Tape ListB. Media LogsC. Tape WrittenD. Tape SummaryE. Volume Summary
Answer: D
QUESTION: 280Which statements are true about tapes that are listed as available? (Choose three.)
A. All of the images are expired and the tape is frozen.B. All of the images have been manually expired.C. The tape is new and has never been written to.D. Some of the images are expired and some are unexpired.E. Images have met their retention period and are expired.
Answer: B, C, E
QUESTION: 281You are browsing a Tape List report to determine tapes that will be available for reuse inthe near future. You encounter several tapes that have a status of frozen. Which statementabout the frozen status is true?
A. The tapes are unavailble for backups or restores.B. The tapes marked as frozen show inconsistency in NetBackup databases.C. The tapes are available for restores but are unavailable for backups.D. The tapes are available for restores but are unavailble for backups until all otherimages on the tape have expired.
251-365
85 http://www.certmagic.com
Answer: C
QUESTION: 282What causes tapes to become frozen by NetBackup?
A. Using an unlabeled blank tapeB. Using an unformatted blank tapeC. Excessive read errorsD. Excessive write errors
Answer: D
QUESTION: 283You are running a restore. If the job fails, how many times will the job attempt to retry therestore?
A. 0B. 1C. 2D. 3
Answer: A
QUESTION: 284You are browsing a Tape List report to determine tapes that will be available for reuse inthe near future. You encounter several tapes that have a status of suspended. Whichstatement about the suspended status is correct?
A. You are unable to use this tape for backup or restore.B. You can restore from this tape but it will only be used again for backups once arestore is run.C. You can restore from this tape but it will not be used again for backups until all otherimages expire.D. You are unable to perform backups or restores to this tape until all other images on thetape have expired.
Answer: C
251-365
86 http://www.certmagic.com
QUESTION: 285ClientA has the C: directory backed up. You want to restore this directory but you need toretain the original data directory and the C:\ drive has limited disk space. The D:\ drive hasplenty of space available. You decide to restore the data to the D:\ drive. How do yourestore the directory and retain the original data directory given these space constraints?
A. Restore everything to the original location.B. Restore everything to a different location.C. Restore individual directories to a different location.D. Restore all files and folders to a different location.
Answer: B
QUESTION: 286In the NetBackup Administration console, where do you determine how many mounts areleft on a cleaning tape?
A. Reports-->Tape Reports-->Tape ListsB. Media and Device Management-->MediaC. Reports-->Tape Reports-->Tape SummaryD. Media and Device Management-->Device Monitor
Answer: B
QUESTION: 287Where is the NetBackup Support Utility (NBSU) located in NetBackup 6.5?
A. install_path\Netbackup\supportB. install_path\Netbackup\bin\supportC. install_path\Netbackup\bin\goodies\supportD. install_path\Netbackup\bin\admincmd\support
Answer: B
QUESTION: 288You backed up ClientA's data and want to restore that data. Assuming that the mediaserver has Media Server Only privileges, on which machine can you accomplish this?
A. ClientA or the master server
251-365
87 http://www.certmagic.com
B. Master server or the media serverC. ClientB or ClientAD. ClientA or the media server
Answer: A
QUESTION: 289Which items can be found in the Activity Monitor window? (Choose four.)
A. ClientB. StatusC. Start timeD. Backup IDE. ThroughputF. Device name
Answer: A, B, C, E
QUESTION: 290Which command will unfreeze a tape with a media ID of ABC123?
A. nbemmcmd -unfreeze -m ABC123B. bpmedia -u -m ABC123C. unfreeze_media -m ABC123D. bpmedia -unfreeze -m ABC123
Answer: D
QUESTION: 291You need to make available a disk-based image from master server A to the diskstorage unit on master server B . What is the quickest way to accomplish this task?
A. Duplicate the image to tape on master A, move the tape to master B and import theimage, and then duplicate the image to disk on master BB. Copy the complete disk image from master A to master B and then import the imagefrom the disk on master BC. On master B, set alternate read server to master A and duplicate the image to thedisk on master BD. On master B, duplicate the disk image from master A to master B disk
251-365
88 http://www.certmagic.com
Answer: B
QUESTION: 292Media ID XYZ001 has three images written to it and it is full. The following table showswhen these three images will expire.
When would media ID XYZ001 be made available to be used for a backup?
A. MondayB. TuesdayC. WednesdayD. Thursday
Answer: D
QUESTION: 293You are at a disaster recovery site, testing restores from your offsite duplicate tapes. Tobegin performing restores, you must change the duplicate copies to be the primary copy.Which commands can you use to accomplish this? (Choose two.)
A. bprecoverB. bpchangeprimaryC. bpimageD. bpexpdateE. bprestore
Answer: B, C
QUESTION: 294How can you determine which tapes are allocated for backups and which tapes areready to write backups? (Choose two.)
251-365
89 http://www.certmagic.com
A. Tape ContentsB. Tape ListC. Images on MediaD. Media LogsE. available_media
Answer: B, E
251-365
90 http://www.certmagic.com