3/8" d rive s ocket s ets

LIMITED LIFETIME WARRANTY

The Stanley Works and Proto Industrial Tools (collectively referred to as “TSW/Proto”) warrants any of its manufactured products for the useful life of the product against deficiency in material or workmanship.

Torque Wrenches, Multipliers and Testers are warranted for one year, except for calibration which is warranted for 90 days from date of purchase. Torque products can be repaired and recalibrated for a nominal charge at the Stanley-Proto® Authorized repair center (2195 East View Parkway, Suite 103, Conyers, GA 30013). Defects in material or workmanship will be repaired or replaced at no cost, all other repairs will be at a nominal charge. Torque products areprecise measuring devices that require care in handling. Stanley-Proto® recommends that all micrometer wrenches berecalibrated once a year or more, depending on usage.

Disclaimers and limitations:• Is subject to the disclaimers and limitations described below and is in lieu of all other warranties, express or implied,

including the implied warranty of merchantability or fitness for a particular purpose.• Gives you specific legal rights. You may also have other rights that vary by state.• Does not extend to products that have been improperly used, altered, or repaired by any entity other than TSW/Proto.• Does not extend to any claim for incidental, consequential, or special damages. Some states do not allow the

exclusion of limitation of incidental or consequential damages, so this exclusion may not apply to you.• TSW/Proto makes no representations beyond those contained in this Limited Lifetime Warranty.• Agents of TSW/Proto have no authority to make representations of any sort beyond those contained in this Limited

Lifetime Warranty.

Exclusive remedy and claim procedure:• The exclusive remedy under this Limited Lifetime Warranty for products determined to be deficient in materials or

workmanship by TSW/Proto is repair or replacement with a reconditioned tool of equal value by TSW/Proto.• The selected remedy is at the sole discretion of TSW/Proto. In no event shall TSW/Proto be responsible for more than

the original purchase price of the product.

Questions:To ask questions about, or to make a claim under this Limited Lifetime Warranty, contact your Stanley-Proto TerritoryManager or a Manufacturer’s Representative.

Products in this catalog may not be available in all countries.

BlackhawkTM by Proto® Tools meet applicable industry standards.

BlackhawkTM by Proto® reserves the right to claim exceptions to specific requirements within any given standard.

intro 6/29/05 11:09 AM Page II

TABLE OF CONTENTS

INTRODUCTION.........................................................................................III-VTOOL STORAGE............................................................................................1-6MASTER SETS............................................................................................7-50COMBINATION SOCKET SETS..............................................................51-96SOCKETS & ACCESSORIES..................................................................97-120WRENCHES...........................................................................................121-136RATCHETING WRENCHES..................................................................137-144SCREWDRIVERS, NUT DRIVERS, HEX KEYS & BITS.....................145-152PLIERS....................................................................................................153-158HAMMERS, CHISELS, PUNCHES & PRY BARS..............................159-164PULLERS................................................................................................165-170MISCELLANEOUS................................................................................171-180TOOL BOARDS..................................................................................... 181-202HAND TOOLS....................................................................................... 203-217INDEX.....................................................................................................218-236

It’s 2 a.m. and you’re alone trying to get a school bus back into the motor pool for the

next day’s route. Or it could be that the boiler is out on a 20-degree day, and you’re

about an hour from having frozen pipes. Regardless, it all comes down to two things:

you and the tool in your hand.

Since 1945, Blackhawk has manufactured the mechanical and industrial

tools workers depend on in tough situations. Now, as a Stanley® Proto®

line, we’ve taken our commitment to reliability even further, broadening

our catalog of tools into a complete, competitively priced line that includes

the most popular sizes and sets for automotive, light industrial and

maintenance use.

BlackhawkTM by Proto® tools are tools you can count on to work when all thatseems to be working is you.

intro 6/29/05 11:09 AM Page III

All ratchets feature a high-polish finish.

The BlackhawkTM by Proto® line is more than just reliable. It’s also complete. Currently, our line

includes more than 1,300 items that cover most automotive, light industrial and maintenance

applications. Compare BlackhawkTM by Proto® features to our competitors,

and you’ll agree – we make it easy to afford high-quality tools.

Complete line of more than 400items, including extensions and other accessories.

Polished nickel chromefinish resists corrosion.

Sockets are machined to prevent fastener rounding.

Ratchets are geared for short, powerful swing arcs.

Contoured handle is comfortable and designed to prevent slippage.

Blackhawk™ by Proto® finishes. A reflection of quality.

Blackhawk™ by Proto® tools are polished to asatin or high-polish finish. This helps resistcorrosion and makes cleaning tools easier.

intro 6/29/05 11:09 AM Page IV

Precision machined ends fitsnugly onto fasteners.

Every BlackhawkTM by Proto® tool is backed by a limited lifetime warranty that covers manufacturer and material defects of any kind.

Long shank providesadded leverage.

Slim profile helps reach intotight areas.

� Automotive repair

� Fleet maintenance

� Light-duty industrial

� Property maintenance

� Machinery repair

BlackhawkTM by Proto® tools are ideally suited to automotive, light industrial and

maintenance applications.

Tool Storage

Socket Sets

Drive Tools,Sockets

andAccessories

Wrenches

Pliers andScrewdrivers

Hammers,Punches

and Chisels

Automotive and Specialty

Tools

Heavy-duty top chests and rollercabinets in 13 of the most commonsizes and drawer storage configurations.

Master sets and Drive sets in a variety of piece-counts, rangingfrom 11-piece Standard Drive to

a 1,050 piece Master Tool Set.

Over 600 individual items in a variety of finishes and drive sizes engineered for the mostdemanding of applications.

Everything from adjustable toopen-end, combination and ratcheting wrenches in over 300 sizes and finishes.

Includes our best-selling pliers and screwdriver profiles designed for everyday applications.

A broad line of rubber mallets, soft-face and ballpein hammers,chisels, punches and pry bars.

Pullers, feeler gauges, magnetictools, wire brushes, and other shop must-haves.

intro 6/29/05 11:09 AM Page V

1-1/4" Combination Wrench with full-polish corrosion-resistant finish. 17" long. Limited Lifetime Warranty. Made in the USA. 1-800-800-TOOL or www.stanleyproto.com

intro 6/29/05 11:09 AM Page VI

Heavy gauge steel construction with recessed drawers to keep drawer handles flush with front. Ball-bearing drawer

slides have 100 lb capacity for heavy loads, full extension for easy access to complete drawer contents and quick

release ball-bearing track slide for easy drawer removal. All roller cabinets and top chests come in high gloss black

finish and have keyed locks for security.

Top Chests Feature:• Full width lid hinge

41" and 54" wide models:• Gas shocks for top lid

27" wide models:• Locking lid stays• Painted side chest handles

Gas lid springs

Heavy duty casters

Ball bearing drawer slides

Tubular steel handle

TOOL STORAGE.TOP CHESTS AND ROLLER CABINETS.

Roller Cabinets Feature:• Dual ball bearing slides on 8" high drawers• Black, ribbed rubber work mat to protect top surface• Painted tubular steel cabinet handle• Heavy duty 5"x2" casters (combination locking and swivel)

Visit us at...www.stanleyproto.com2

TO

OL

ST

OR

AG

E

95414R ROLLER CABINET• 14 Drawers• Capacity cubic inches: 19219• Weight: 267 lbs.

Cabinet Number of Drawer DimensionsDimensions Drawers Left Bank Right Bank

1/1 4"h x 24"w x 18"d 4"h x 24"w x 18"d

41-1/2"h x 54"w x 18"d 2/2 2"h x 24"w x 18"d 2"h x 24"w x 18"d

3/3 4"h x 24"w x 18"d 4"h x 24"w x 18"d

1/1 8"h x 24"w x 18"d 8"h x 24"w x 18"d



1/1 4"h x 24"w x 18"d 4"h x 12"w x 18"d


3/3 4"h x 24"w x 18"d 4"h x 12"w x 18"d

1/1 8"h x 24"w x 18"d 8"h x 12"w x 18"d



1 4"h x 37"w x 18"d —


3/3 4"h x 24"w x 18"d 4"h x 12"w x 18"d

1/1 8"h x 24"w x 18"d 8"h x 12"w x 18"d

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

TO

OL

ST

OR

AG

E

3Toll Free Customer Service Number: 1-800-800-TOOL

Customer Service FAX Number: 1-770-648-9108

R O L L E R C A B I N E T S


Cabinet Number of Dimensions Drawers Drawer Dimensions

41-1/2"h x 41"w x 18"d 5 4"h x 37"w x 18"d

1 8"h x 37"w x 18"d



1 4"h x 24"w x 18"d

41-1/2"h x 27"w x 18"d 4 2"h x 24"w x 18"d

2 4"h x 24"w x 18"d

1 8"h x 24"w x 18"d



1 4"h x 24"w x 18"d

35"h x 27"w x 18"d 1 2"h x 24"w x 18"d

2 4"h x 24"w x 18"d

1 8"h x 24"w x 18"d

95410C 94109C 94107C 92706C 92705C 90007S 92703I

95414R X X X X X X 27"w94114R X X X X X 27"w94113R X X X X X 27"w94106R X X X X X 27"w92708R X X X Exact Fit92705R X X X Exact Fit

Chests Accessories

BlackhawkTM by Proto® Storage Combinations - Designed To Work Together

Cabinets


TO

OL

ST

OR

AG

E

95410C TOP CHEST• 10 Drawers• Capacity cubic inches: 12491• Weight: 187 lbs.


23"h x 54"w x 18"d 3/3 2"h x 24"w x 18"d 2"h x 24"w x 18"d

2/2 4"h x 24"w x 18"d 4"h x 24"w x 18"d




1/2 8"h x 24"w x 18"d 4"h x 12"w x 18"d



1/1 2"h x 24"w x 18"d 2"h x 12"w x 18"d


2/1 4"h x 24"w x 18"d 8"h x 12"w x 18"d


TO

OL

ST

OR

AG

E



T O P C H E S T



19"h x 27"w x 18"d 5 2"h x 24"w x 18"d

1 4"h x 24"w x 18"d



19"h x 27"w x 18"d 3 2"h x 24"w x 18"d

2 4"h x 24"w x 18"d

95410C 94109C 94107C 92706C 92705C 90007S 92703I


Chests Accessories

BlackhawkTM by Proto® Storage Combinations - Designed to Work Together

Cabinets

90007S SIDE CABINET• Attaches to Blackhawk™ by Proto® Roller Cabinets• 7 Drawers• Capacity cubic inches: 4584• Weight: 86 lbs.


1 4"h x 12"w x 18"d

35"h x 15"w x 18"d 2 2"h x 12"w x 18"d

3 4"h x 12"w x 18"d

1 8"h x 12"w x 18"d

92703I INTERMEDIATE• 3 Drawers• Capacity cubic inches: 2586• Weight: 51 lbs.


11 1/2"h x 27"w x 18"d 2 2"h x 24"w x 18"d

1 4"h x 24"w x 18"d

94100 TOOL BOX WITH TRAY• Capacity cubic inches: 931• Weight: 8 lbs.

Dimension

7"h x 19"w x 7"d


TO

OL

ST

OR

AG

E

95410C 94109C 94107C 92706C 92705C 90007S 92703I


Chests Accessories

BlackhawkTM by Proto® Storage Combinations - Designed to Work Together

Cabinets

A C C E S S O R I E S

Master Sets include the most popular standard and metric tools in multiple drive sizes plus wrenches, screwdrivers,

punches, chisels, pliers, and other assorted hand tools. Sets range in size from 30 pieces to over 1000. The tools

required to meet the demand of any job.

MASTER SETS.DESIGNED TO MEET THE NEEDS OF THE PROFESSIONAL.

master.qxd 6/24/05 1:30 PM Page 7


MA

ST

ER

SE

TS

Torx® is a registered trademark of Textron.

1050 PIECE MASTER TOOL SETITEM NO. 97050• Weight: 501 lbs.

602 Sockets & Accessories115 Wrenches27 Screwdrivers29 Punches & Chisels33 Pliers244 Miscellaneous Tools



MA

ST

ER

SE

TS



M A S T E R T O O L S E T S

GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-1406 12 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1407 12 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1408 12 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1409 12 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1410 12 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1411 12 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1412 12 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1414 12 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1416 12 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-655M 6 Pt. Standard Metric Socket 1/4" Drive 5.5 mmGW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-755M 12 Pt. Standard Metric Socket 1/4" Drive 5.5 mmGW-706M 12 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mmGW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mm

GW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1605M 12 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-1606M 12 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-1607M 12 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-1608M 12 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-1609M 12 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-1610M 12 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-1611M 12 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-1612M 12 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-1613M 12 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1208 8 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1210 8 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1212 8 Pt. Standard Inch Socket 1/4" Drive 3/8"TS-1209 1/4" Drive Torx® Socket Internal T9TS-1210 1/4" Drive Torx® Socket Internal T10TS-1215 1/4" Drive Torx® Socket Internal T15TS-1220 1/4" Drive Torx® Socket Internal T20TS-1225 1/4" Drive Torx® Socket Internal T25TS-1227 1/4" Drive Torx® Socket Internal T27TS-1230 1/4" Drive Torx® Socket Internal T30TS-1340 3/8" Drive Torx® Socket Internal T40TS-1345 3/8" Drive Torx® Socket Internal T45TS-1347 3/8" Drive Torx® Socket Internal T47TS-1350 3/8" Drive Torx® Socket Internal T50TS-1355 3/8" Drive Torx® Socket Internal T55TR-3210 1/4" Tamper-Resistant Torx® Socket Internal T10TR-3215 1/4" Tamper-Resistant Torx® Socket Internal T15TR-3220 1/4" Tamper-Resistant Torx® Socket Internal T20TR-3225 1/4" Tamper-Resistant Torx® Socket Internal T25TR-3227 1/4" Tamper-Resistant Torx® Socket Internal T27TR-3230 1/4" Tamper-Resistant Torx® Socket Internal T30TS-2204 1/4" Drive Torx® Socket External E4TS-2205 1/4" Drive Torx® Socket External E5TS-2206 1/4" Drive Torx® Socket External E6TS-2207 1/4" Drive Torx® Socket External E7TS-2208 3/8" Drive Torx® Socket External E8TS-2310 3/8" Drive Torx® Socket External E10TS-2312 3/8" Drive Torx® Socket External E12TS-2314 3/8" Drive Torx® Socket External E14TS-2316 3/8" Drive Torx® Socket External E16GW-9550 1/4" Drive Spinner34960 1/4" Drive 1/4" X 3/8" Adapter9000H 1/4" Drive Bit HolderGW-9545 1/4" Drive Flexible SpinnerGW-9898 1/4" Drive Extension 3"GW-9899 1/4" Drive Extension 6"GW-9955B 1/4" Drive Quick Release RatchetGW-9945B 1/4" Drive Round Head Reversible RatchetGW-9749B 1/4" Drive Flex Handle Ratchet30608 6 Pt. Standard Inch Socket 3/8" Drive 1/4"30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"

1050 PIECE MASTER TOOL SETITEM NO. 97050 (CONTINUED)

Contents Description Contents Description



MA

ST

ER

SE

TS

30632 6 Pt. Standard Inch Socket 3/8" Drive 1"30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"300301 12 Pt. Standard Inch Socket 3/8" Drive 15/16"300321 12 Pt. Standard Inch Socket 3/8" Drive 1"HW-1510 6 Pt. Deep Inch Socket 3/8" Drive 5/16"HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"HW-1530 6 Pt. Deep Inch Socket 3/8" Drive 15/16"HW-1532 6 Pt. Deep Inch Socket 3/8" Drive 1"30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"30432 12 Pt. Deep Inch Socket 3/8" Drive 1"32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm32021M 6 Pt. Standard Metric Socket 3/8" Drive 21 mm32022M 6 Pt. Standard Metric Socket 3/8" Drive 22 mm34007M 12 Pt. Standard Metric Socket 3/8" Drive 7 mm34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm

34020M 12 Pt. Standard Metric Socket 3/8" Drive 20 mm34021M 12 Pt. Standard Metric Socket 3/8" Drive 21 mm34022M 12 Pt. Standard Metric Socket 3/8" Drive 22 mmHW-1507M 6 Pt. Deep Metric Socket 3/8" Drive 7 mmHW-1508M 6 Pt. Deep Metric Socket 3/8" Drive 8 mmHW-1509M 6 Pt. Deep Metric Socket 3/8" Drive 9 mmHW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1518M 6 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mmHW-1607M 12 Pt. Deep Metric Socket 3/8" Drive 7 mmHW-1608M 12 Pt. Deep Metric Socket 3/8" Drive 8 mmHW-1609M 12 Pt. Deep Metric Socket 3/8" Drive 9 mmHW-1610M 12 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1611M 12 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1612M 12 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1613M 12 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1614M 12 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1615M 12 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1616M 12 Pt. Deep Metric Socket 3/8" Drive 16 mmHW-1617M 12 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1618M 12 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1619M 12 Pt. Deep Metric Socket 3/8" Drive 19 mm31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"30212 6 Pt. Universal Inch Socket 3/8" Drive 3/8"30214 6 Pt. Universal Inch Socket 3/8" Drive 7/16"30216 6 Pt. Universal Inch Socket 3/8" Drive 1/2"30218 6 Pt. Universal Inch Socket 3/8" Drive 9/16"30220 6 Pt. Universal Inch Socket 3/8" Drive 5/8"30222 6 Pt. Universal Inch Socket 3/8" Drive 11/16"30224 6 Pt. Universal Inch Socket 3/8" Drive 3/4"30209M 6 Pt. Universal Metric Socket 3/8" Drive 9 mm30210M 6 Pt. Universal Metric Socket 3/8" Drive 10 mm30211M 6 Pt. Universal Metric Socket 3/8" Drive 11 mm30212M 6 Pt. Universal Metric Socket 3/8" Drive 12 mm30213M 6 Pt. Universal Metric Socket 3/8" Drive 13 mm30214M 6 Pt. Universal Metric Socket 3/8" Drive 14 mm30215M 6 Pt. Universal Metric Socket 3/8" Drive 15 mmU-1508 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/4"U-1510 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/16"U-1512 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/8"U-1514 6 Pt. Standard Inch Impact Socket 3/8" Drive 7/16"U-1516 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/2"U-1518 6 Pt. Standard Inch Impact Socket 3/8" Drive 9/16"U-1520 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/8"U-1522 6 Pt. Standard Inch Impact Socket 3/8" Drive 11/16"U-1524 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/4"U-1508M 6 Pt. Standard Metric Impact Socket 3/8" Drive 8 mmU-1509M 6 Pt. Standard Metric Impact Socket 3/8" Drive 9 mmU-1510M 6 Pt. Standard Metric Impact Socket 3/8" Drive 10 mmU-1512M 6 Pt. Standard Metric Impact Socket 3/8" Drive 12 mmU-1513M 6 Pt. Standard Metric Impact Socket 3/8" Drive 13 mmU-1514M 6 Pt. Standard Metric Impact Socket 3/8" Drive 14 mmU-1515M 6 Pt. Standard Metric Impact Socket 3/8" Drive 15 mmU-1517M 6 Pt. Standard Metric Impact Socket 3/8" Drive 17 mmU-1518M 6 Pt. Standard Metric Impact Socket 3/8" Drive 18 mm



Phillips® is a registered trademark of Phillips Screw Co.



MA

ST

ER

SE

TS




U-1519M 6 Pt. Standard Metric Impact Socket 3/8" Drive 19 mmU-1610 6 Pt. Deep Inch Impact Socket 3/8" Drive 5/16"U-1612 6 Pt. Deep Inch Impact Socket 3/8" Drive 3/8"U-1614 6 Pt. Deep Inch Impact Socket 3/8" Drive 7/16"U-1616 6 Pt. Deep Inch Impact Socket 3/8" Drive 1/2"U-1618 6 Pt. Deep Inch Impact Socket 3/8" Drive 9/16"U-1620 6 Pt. Deep Inch Impact Socket 3/8" Drive 5/8"U-1622 6 Pt. Deep Inch Impact Socket 3/8" Drive 11/16"U-1624 6 Pt. Deep Inch Impact Socket 3/8" Drive 3/4"U-1608M 6 Pt. Deep Metric Impact Socket 3/8" Drive 8 mmU-1609M 6 Pt. Deep Metric Impact Socket 3/8" Drive 9 mmU-1610M 6 Pt. Deep Metric Impact Socket 3/8" Drive 10 mmU-1611M 6 Pt. Deep Metric Impact Socket 3/8" Drive 11 mmU-1612M 6 Pt. Deep Metric Impact Socket 3/8" Drive 12 mmU-1613M 6 Pt. Deep Metric Impact Socket 3/8" Drive 13 mmU-1614M 6 Pt. Deep Metric Impact Socket 3/8" Drive 14 mmU-1615M 6 Pt. Deep Metric Impact Socket 3/8" Drive 15 mmU-1616M 6 Pt. Deep Metric Impact Socket 3/8" Drive 16 mmU-1617M 6 Pt. Deep Metric Impact Socket 3/8" Drive 17 mmU-1618M 6 Pt. Deep Metric Impact Socket 3/8" Drive 18 mmU-1619M 6 Pt. Deep Metric Impact Socket 3/8" Drive 19 mmHW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"30320S 3/8" Drive Spark Plug Socket 5/8" Universal30326 3/8" Drive Spark Plug Socket 13/16" Universal34993 3/8" Drive Universal Joint34963 3/8" Drive 3/8" x 1/4" Adapter34966 3/8" Drive 3/8" x 1/2" Adapter34984 3/8" Drive Extension 11" 34989 3/8" Drive Extension 1-3/4" 34983 3/8" Drive Extension 19" 34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34947B 3/8" Drive Round Head Reversible Ratchet34948B 3/8" Drive Mini Flex Ratchet34950X 3/8" Drive Indexible Head Ratchet34945B 3/8" Drive Round Head Knurled Reversible Ratchet34982 3/8" Drive Speeder Handle Ratchet34986B 3/8" Drive Flex Handle RatchetHW-9504 Slotted Screwdriver Bit Socket 3/16" Tip WidthHW-9505 Slotted Screwdriver Bit Socket 1/4" Tip WidthHW-9506 Slotted Screwdriver Bit Socket 5/16" Tip WidthHW-9450 Phillips® Screwdriver Bit Socket No. 1HW-9451 Phillips® Screwdriver Bit Socket No. 2HW-9452 Phillips® Screwdriver Bit Socket No. 3HW-9453 Phillips® Screwdriver Bit Socket No. 4HW-9442 3/8" Drive Hex Bit Socket Inch 1/8"HW-9443 3/8" Drive Hex Bit Socket Inch 9/64"HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"HW-9449 3/8" Drive Hex Bit Socket Inch 3/16"HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"HW-9404M Hex Bit Socket Metric 4 mmHW-9405M Hex Bit Socket Metric 5 mmHW-9406M Hex Bit Socket Metric 6 mmHW-9407M Hex Bit Socket Metric 7 mmHW-9408M Hex Bit Socket Metric 8 mmHW-9410M Hex Bit Socket Metric 10 mm40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"

40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"40632 6 Pt. Standard Inch Socket 1/2" Drive 1"40634 6 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40636 6 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40640 6 Pt. Standard Inch Socket 1/2" Drive 1-1/4"40642A 6 Pt. Standard Inch Socket 1/2" Drive 1-1/2"40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40140 12 Pt. Standard Inch Socket 1/2" Drive 1-1/4"40138 12 Pt. Standard Inch Socket 1/2" Drive 1-3/16"40144A 12 Pt. Standard Inch Socket 1/2" Drive 1-1/2"40416 6 Pt. Deep Inch Socket 1/2" Drive 1/2"40418 6 Pt. Deep Inch Socket 1/2" Drive 9/16"40420 6 Pt. Deep Inch Socket 1/2" Drive 5/8"40422 6 Pt. Deep Inch Socket 1/2" Drive 11/16"40424 6 Pt. Deep Inch Socket 1/2" Drive 3/4"40426 6 Pt. Deep Inch Socket 1/2" Drive 13/16"40428 6 Pt. Deep Inch Socket 1/2" Drive 7/8"40430 6 Pt. Deep Inch Socket 1/2" Drive 15/16"40432 6 Pt. Deep Inch Socket 1/2" Drive 1"40434 6 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40436 6 Pt. Deep Inch Socket 1/2" Drive 1-1/8"40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"40332 12 Pt. Deep Inch Socket 1/2" Drive 1"40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40336 12 Pt. Deep Inch Socket 1/2" Drive 1-1/8"42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm43023M 6 Pt. Standard Metric Socket 1/2" Drive 23 mm43024M 6 Pt. Standard Metric Socket 1/2" Drive 24 mm43027M 6 Pt. Standard Metric Socket 1/2" Drive 27 mm43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm





MA

ST

ER

SE

TS

43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm 42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm42020M 12 Pt. Standard Metric Socket 1/2" Drive 20 mm42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm42023M 12 Pt. Standard Metric Socket 1/2" Drive 23 mm42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm42025M 12 Pt. Standard Metric Socket 1/2" Drive 25 mm42026M 12 Pt. Standard Metric Socket 1/2" Drive 26 mm42027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm42028M 12 Pt. Standard Metric Socket 1/2" Drive 28 mm42030M 12 Pt. Standard Metric Socket 1/2" Drive 30 mm42032M 12 Pt. Standard Metric Socket 1/2" Drive 32 mm42036M 12 Pt. Standard Metric Socket 1/2" Drive 36 mm45010M 6 Pt. Deep Metric Socket 1/2" Drive 10 mm45011M 6 Pt. Deep Metric Socket 1/2" Drive 11 mm45012M 6 Pt. Deep Metric Socket 1/2" Drive 12 mm45013M 6 Pt. Deep Metric Socket 1/2" Drive 13 mm45014M 6 Pt. Deep Metric Socket 1/2" Drive 14 mm45015M 6 Pt. Deep Metric Socket 1/2" Drive 15 mm45016M 6 Pt. Deep Metric Socket 1/2" Drive 16 mm45017M 6 Pt. Deep Metric Socket 1/2" Drive 17 mm45018M 6 Pt. Deep Metric Socket 1/2" Drive 18 mm45019M 6 Pt. Deep Metric Socket 1/2" Drive 19 mm45020M 6 Pt. Deep Metric Socket 1/2" Drive 20 mm45021M 6 Pt. Deep Metric Socket 1/2" Drive 21 mm45022M 6 Pt. Deep Metric Socket 1/2" Drive 22 mm45023M 6 Pt. Deep Metric Socket 1/2" Drive 23 mm45024M 6 Pt. Deep Metric Socket 1/2" Drive 24 mm45025M 6 Pt. Deep Metric Socket 1/2" Drive 25 mm45026M 6 Pt. Deep Metric Socket 1/2" Drive 26 mm45027M 6 Pt. Deep Metric Socket 1/2" Drive 27 mm44010M 12 Pt. Deep Metric Socket 1/2" Drive 10 mm44011M 12 Pt. Deep Metric Socket 1/2" Drive 11 mm44012M 12 Pt. Deep Metric Socket 1/2" Drive 12 mm44013M 12 Pt. Deep Metric Socket 1/2" Drive 13 mm44014M 12 Pt. Deep Metric Socket 1/2" Drive 14 mm44015M 12 Pt. Deep Metric Socket 1/2" Drive 15 mm44016M 12 Pt. Deep Metric Socket 1/2" Drive 16 mm44017M 12 Pt. Deep Metric Socket 1/2" Drive 17 mm44018M 12 Pt. Deep Metric Socket 1/2" Drive 18 mm44019M 12 Pt. Deep Metric Socket 1/2" Drive 19 mm44020M 12 Pt. Deep Metric Socket 1/2" Drive 20 mm44021M 12 Pt. Deep Metric Socket 1/2" Drive 21 mm44022M 12 Pt. Deep Metric Socket 1/2" Drive 22 mm44023M 12 Pt. Deep Metric Socket 1/2" Drive 23 mm44024M 12 Pt. Deep Metric Socket 1/2" Drive 24 mm44025M 12 Pt. Deep Metric Socket 1/2" Drive 25 mm44026M 12 Pt. Deep Metric Socket 1/2" Drive 26 mm44027M 12 Pt. Deep Metric Socket 1/2" Drive 27 mmUW-1612 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/8"UW-1614 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/16"UW-1616 6 Pt. Standard Inch Impact Socket 1/2" Drive 1/2"UW-1618 6 Pt. Standard Inch Impact Socket 1/2" Drive 9/16"UW-1620 6 Pt. Standard Inch Impact Socket 1/2" Drive 5/8"UW-1622 6 Pt. Standard Inch Impact Socket 1/2" Drive 11/16"UW-1624 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/4"UW-1626 6 Pt. Standard Inch Impact Socket 1/2" Drive 13/16"UW-1628 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/8"UW-1630 6 Pt. Standard Inch Impact Socket 1/2" Drive 15/16"UW-1632 6 Pt. Standard Inch Impact Socket 1/2" Drive 1"

UW-1634 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/16"UW-1636 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-3/16"UW-1638 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/8"UW-1640 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/4"UW-1512 6 Pt. Deep Inch Impact Socket 1/2" Drive 3/8"UW-1514 6 Pt. Deep Inch Impact Socket 1/2" Drive 7/16"UW-1516 6 Pt. Deep Inch Impact Socket 1/2" Drive 1/2"UW-1518 6 Pt. Deep Inch Impact Socket 1/2" Drive 9/16"UW-1520 6 Pt. Deep Inch Impact Socket 1/2" Drive 5/8"UW-1522 6 Pt. Deep Inch Impact Socket 1/2" Drive 11/16"UW-1524 6 Pt. Deep Inch Impact Socket 1/2" Drive 3/4"UW-1526 6 Pt. Deep Inch Impact Socket 1/2" Drive 13/16"UW-1528 6 Pt. Deep Inch Impact Socket 1/2" Drive 7/8"UW-1530 6 Pt. Deep Inch Impact Socket 1/2" Drive 15/16"UW-1532 6 Pt. Deep Inch Impact Socket 1/2" Drive 1"UW-1534 6 Pt. Deep Inch Impact Socket 1/2" Drive 1-1/16"UW-1536 6 Pt. Deep Inch Impact Socket 1/2" Drive 1-1/8"UW-610M 6 Pt. Standard Metric Impact Socket 1/2" Drive 10 mmUW-611M 6 Pt. Standard Metric Impact Socket 1/2" Drive 11 mmUW-612M 6 Pt. Standard Metric Impact Socket 1/2" Drive 12 mmUW-613M 6 Pt. Standard Metric Impact Socket 1/2" Drive 13 mmUW-614M 6 Pt. Standard Metric Impact Socket 1/2" Drive 14 mmUW-615M 6 Pt. Standard Metric Impact Socket 1/2" Drive 15 mmUW-616M 6 Pt. Standard Metric Impact Socket 1/2" Drive 16 mmUW-617M 6 Pt. Standard Metric Impact Socket 1/2" Drive 17 mmUW-618M 6 Pt. Standard Metric Impact Socket 1/2" Drive 18 mmUW-619M 6 Pt. Standard Metric Impact Socket 1/2" Drive 19 mmUW-620M 6 Pt. Standard Metric Impact Socket 1/2" Drive 20 mmUW-621M 6 Pt. Standard Metric Impact Socket 1/2" Drive 21 mmUW-622M 6 Pt. Standard Metric Impact Socket 1/2" Drive 22 mmUW-624M 6 Pt. Standard Metric Impact Socket 1/2" Drive 24 mmUW-627M 6 Pt. Standard Metric Impact Socket 1/2" Drive 27 mmUW-510M 6 Pt. Deep Metric Impact Socket 1/2" Drive 10 mmUW-511M 6 Pt. Deep Metric Impact Socket 1/2" Drive 11 mmUW-512M 6 Pt. Deep Metric Impact Socket 1/2" Drive 12 mmUW-513M 6 Pt. Deep Metric Impact Socket 1/2" Drive 13 mmUW-514M 6 Pt. Deep Metric Impact Socket 1/2" Drive 14 mmUW-515M 6 Pt. Deep Metric Impact Socket 1/2" Drive 15 mmUW-516M 6 Pt. Deep Metric Impact Socket 1/2" Drive 16 mmUW-517M 6 Pt. Deep Metric Impact Socket 1/2" Drive 17 mmUW-518M 6 Pt. Deep Metric Impact Socket 1/2" Drive 18 mmUW-519M 6 Pt. Deep Metric Impact Socket 1/2" Drive 19 mmUW-520M 6 Pt. Deep Metric Impact Socket 1/2" Drive 20 mmUW-521M 6 Pt. Deep Metric Impact Socket 1/2" Drive 21 mmUW-522M 6 Pt. Deep Metric Impact Socket 1/2" Drive 22 mmUW-524M 6 Pt. Deep Metric Impact Socket 1/2" Drive 24 mmUW-526M 6 Pt. Deep Metric Impact Socket 1/2" Drive 26 mmUW-527M 6 Pt. Deep Metric Impact Socket 1/2" Drive 27 mmUW-1505 2 Pc 1/2" Drive Speciality Socket Wheel Impact Lug KitUWP-430M 1/2" Drive Speciality Socket 30 mmUWP-436M 1/2" Drive Speciality Socket 36 mm40326S 1/2" Drive Spark Plug Socket 13/16"40320S 1/2" Drive Spark Plug Socket 5/8"49979 1/2" Drive 15/16" Drag Link Socket49980 1/2" Drive Stud Extractor49978 1/2" Drive Universal Joint34965 1/2" Drive 1/2" x 3/8" Adapter69992 1/2" Drive 1/2" x 3/4" Adapter49972 1/2" Drive Extension 19" 49964 1/2" Drive Extension 2" 49966 1/2" Drive Extension 5" 49990 1/2" Drive Extension 10" 49976 1/2" Drive Impact Universal JointUW-24 1/2" Drive Impact Extension 5" UW-30 1/2" Drive Impact Extension 2-5/8"





MA

ST

ER

SE

TS




UW-25 1/2" Drive Impact Extension 10" 49945B 1/2" Drive Round Head Reversible Ratchet49992 1/2" Drive Speeder Handle Ratchet 49988B 1/2" Drive Flex Handle Ratchet 60026A 12 Pt. Standard Inch Socket 3/4" Drive 3/4"60027A 12 Pt. Standard Inch Socket 3/4" Drive 13/16"60028 12 Pt. Standard Inch Socket 3/4" Drive 7/8"60030 12 Pt. Standard Inch Socket 3/4" Drive 15/16"60032 12 Pt. Standard Inch Socket 3/4" Drive 1"60034 12 Pt. Standard Inch Socket 3/4" Drive 1-1/16"60036 12 Pt. Standard Inch Socket 3/4" Drive 1-1/8"60038 12 Pt. Standard Inch Socket 3/4" Drive 1-3/16"60040 12 Pt. Standard Inch Socket 3/4" Drive 1-1/4"60042 12 Pt. Standard Inch Socket 3/4" Drive 1-5/16"60044 12 Pt. Standard Inch Socket 3/4" Drive 1-3/8"60046 12 Pt. Standard Inch Socket 3/4" Drive 1-7/16"60048 12 Pt. Standard Inch Socket 3/4" Drive 1-1/2"60050 12 Pt. Standard Inch Socket 3/4" Drive 1-9/16"60052 12 Pt. Standard Inch Socket 3/4" Drive 1-5/8"60054 12 Pt. Standard Inch Socket 3/4" Drive 1-11/16"60056 12 Pt. Standard Inch Socket 3/4" Drive 1-3/4"60058 12 Pt. Standard Inch Socket 3/4" Drive 1-13/16"60060 12 Pt. Standard Inch Socket 3/4" Drive 1-7/8"60064 12 Pt. Standard Inch Socket 3/4" Drive 2"60068 12 Pt. Standard Inch Socket 3/4" Drive 2-1/8"60070 12 Pt. Standard Inch Socket 3/4" Drive 2-3/16"61019M 12 Pt. Standard Metric Socket 3/4" Drive 19 mm61021M 12 Pt. Standard Metric Socket 3/4" Drive 21 mm61022M 12 Pt. Standard Metric Socket 3/4" Drive 22 mm61023M 12 Pt. Standard Metric Socket 3/4" Drive 23 mm61024M 12 Pt. Standard Metric Socket 3/4" Drive 24 mm61025M 12 Pt. Standard Metric Socket 3/4" Drive 25 mm61026M 12 Pt. Standard Metric Socket 3/4" Drive 26 mm61027M 12 Pt. Standard Metric Socket 3/4" Drive 27 mm61028M 12 Pt. Standard Metric Socket 3/4" Drive 28 mm61029M 12 Pt. Standard Metric Socket 3/4" Drive 29 mm61030M 12 Pt. Standard Metric Socket 3/4" Drive 30 mm61031M 12 Pt. Standard Metric Socket 3/4" Drive 31 mm61032M 12 Pt. Standard Metric Socket 3/4" Drive 32 mm61035M 12 Pt. Standard Metric Socket 3/4" Drive 35 mm61036M 12 Pt. Standard Metric Socket 3/4" Drive 36 mm61038M 12 Pt. Standard Metric Socket 3/4" Drive 38 mm61041M 12 Pt. Standard Metric Socket 3/4" Drive 41 mm61042M 12 Pt. Standard Metric Socket 3/4" Drive 42 mm61046M 12 Pt. Standard Metric Socket 3/4" Drive 46 mm61050M 12 Pt. Standard Metric Socket 3/4" Drive 50 mm61054M 12 Pt. Standard Metric Socket 3/4" Drive 54 mmUW-2424 6 Pt. Standard Inch Impact Socket 3/4" Drive 3/4"UW-2426 6 Pt. Standard Inch Impact Socket 3/4" Drive 13/16"UW-2428 6 Pt. Standard Inch Impact Socket 3/4" Drive 7/8"UW-2430 6 Pt. Standard Inch Impact Socket 3/4" Drive 15/16"UW-2432 6 Pt. Standard Inch Impact Socket 3/4" Drive 1"UW-2434 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-1/16"UW-2436 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-1/8"UW-2438 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-3/16"UW-2440 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-1/4"UW-2442 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-5/16"UW-2444 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-3/8"UW-2446 6 Pt. Standard Inch Impact Socket 3/4" Drive 1 -7/16"UW-2448 6 Pt. Standard Inch Impact Socket 3/4" Drive 1-1/2"UW-2624 6 Pt. Deep Inch Impact Socket 3/4" Drive 3/4"UW-2626 6 Pt. Deep Inch Impact Socket 3/4" Drive 13/16"UW-2628 6 Pt. Deep Inch Impact Socket 3/4" Drive 7/8"UW-2630 6 Pt. Deep Inch Impact Socket 3/4" Drive 15/16"UW-2632 6 Pt. Deep Inch Impact Socket 3/4" Drive 1"

UW-2634 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-1/16"UW-2636 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-1/8"UW-2638 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-3/16"UW-2640 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-1/4"UW-2642 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-5/16"UW-2644 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-3/8"UW-2646 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-7/16"UW-2648 6 Pt. Deep Inch Impact Socket 3/4" Drive 1-1/2"UWP-660 3/4" Budd Wheel Socket 13/16" Square, 1-1/2" Hex49991 3/4" Drive 3/4" x 1/2" Adapter69993 3/4" Drive Extension 4" 69995 3/4" Drive Extension 8" 69994 3/4" Drive Extension 16" 69997 3/4" Drive Sliding-Tee69998 3/4" Drive Flex Handle Ratchet69945B 3/4" Drive Round Head Reversible RatchetBW-1156 Satin Finish - Combination Wrench 1/4"BW-1159 Satin Finish - Combination Wrench 5/16"BW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1165 Satin Finish - Combination Wrench 11/16"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1167A Satin Finish - Combination Wrench 13/16"BW-1167 Satin Finish - Combination Wrench 7/8"BW-1168 Satin Finish - Combination Wrench 15/16"BW-1170 Satin Finish - Combination Wrench 1"BW-1171 Satin Finish - Combination Wrench 1-1/16"BW-1172 Satin Finish - Combination Wrench 1-1/8"BW-1173 Satin Finish - Combination Wrench 1-1/4"BW-1174 Satin Finish - Combination Wrench 1-5/16"BW-1175 Satin Finish - Combination Wrench 1-3/8"BW-1176 Satin Finish - Combination Wrench 1-7/16"BW-1177 Satin Finish - Combination Wrench 1-1/2"BW-1106M Satin Finish - Combination Wrench Metric 6 mmBW-1107M Satin Finish - Combination Wrench Metric 7 mmBW-1108M Satin Finish - Combination Wrench Metric 8 mmBW-1109M Satin Finish - Combination Wrench Metric 9 mmBW-1110M Satin Finish - Combination Wrench Metric 10 mmBW-1111M Satin Finish - Combination Wrench Metric 11 mmBW-1112M Satin Finish - Combination Wrench Metric 12 mmBW-1113M Satin Finish - Combination Wrench Metric 13 mmBW-1114M Satin Finish - Combination Wrench Metric 14 mmBW-1115M Satin Finish - Combination Wrench Metric 15 mmBW-1116M Satin Finish - Combination Wrench Metric 16 mmBW-1117M Satin Finish - Combination Wrench Metric 17 mmBW-1118M Satin Finish - Combination Wrench Metric 18 mmBW-1119M Satin Finish - Combination Wrench Metric 19 mmBW-1120M Satin Finish - Combination Wrench Metric 20 mmBW-1121M Satin Finish - Combination Wrench Metric 21 mmBW-1122M Satin Finish - Combination Wrench Metric 22 mmBW-1124M Satin Finish - Combination Wrench Metric 24 mmBW-1125M Satin Finish - Combination Wrench Metric 25 mmBW-1126M Satin Finish - Combination Wrench Metric 26 mmBW-1127M Satin Finish - Combination Wrench Metric 27 mmBW-1128M Satin Finish - Combination Wrench Metric 28 mmBW-1130M Satin Finish - Combination Wrench Metric 30 mmBW-1132M Satin Finish - Combination Wrench Metric 32 mm4020P Full Polish - Open End Wrench Inch 1/4" X 5/16"4723P Full Polish - Open End Wrench Inch 3/8" X 7/16"4724P Full Polish - Open End Wrench Inch 7/16" X 1/2"4725P Full Polish - Open End Wrench Inch 1/2" X 9/16"4727P Full Polish - Open End Wrench Inch 5/8" X 11/16"





MA

ST

ER

SE

TS

Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.

4728P Full Polish - Open End Wrench Inch 11/16" X 3/4"4732P Full Polish - Open End Wrench Inch 13/16" X 7/8"4033P Full Polish - Open End Wrench Inch 15/16" X 1"BWE-67MP Full Polish - Open End Wrench Metric 6 mm X 7 mmBWE-89MP Full Polish - Open End Wrench Metric 8 mm X 9 mmBWE-1011MP Full Polish - Open End Wrench Metric 10 mm X 11 mmBWE-1213MP Full Polish - Open End Wrench Metric 12 mm X 13 mm BWE-1415MP Full Polish - Open End Wrench Metric 14 mm X 15 mmBWE-1617MP Full Polish - Open End Wrench Metric 16 mm X 17 mmBWE-1819MP Full Polish - Open End Wrench Metric 18 mm X 19 mmBWE-2022MP Full Polish - Open End Wrench Metric 20 mm X 22 mmBWS-1202P Box End Wrench Long - Inch 5/16" X 3/8"BWS-1206P Box End Wrench Long - Inch 7/16" X 1/2"BWS-1210P Box End Wrench Long - Inch 1/2" X 9/16"BWS-1211P Box End Wrench Long - Inch 9/16" X 5/8"BWS-1214P Box End Wrench Long - Inch 11/16" X 3/4"BWS-1216P Box End Wrench Long - Inch 13/16" X 7/8"BWS-1218P Box End Wrench Long - Inch 15/16" X 1"FN-1402P Flare Nut Wrench - Inch 3/8" X 7/16"FN-1404P Flare Nut Wrench - Inch 1/2" X 9/16"FN-1406P Flare Nut Wrench - Inch 5/8" X 11/16"FN-1410P Flare Nut Wrench - Inch 3/4" X 1"FN-911MP Flare Nut Wrench - Metric 9 mm X 11 mmFN-1012MP Flare Nut Wrench - Metric 10 mm X 12 mmFN-1314MP Flare Nut Wrench - Metric 13 mm X 14 mmFN-1517MP Flare Nut Wrench - Metric 15 mm X 17 mmFN-1921MP Flare Nut Wrench - Metric 19 mm X 21 mmAW-1004-1 Adjustable Wrench 4"AW-1006-1 Adjustable Wrench 6"AW-1008-1 Adjustable Wrench 8"AW-1010-1 Adjustable Wrench 10"AW-1012-1 Adjustable Wrench 12"AW-1015-1 Adjustable Wrench 15"AW-1351 Universal Chain Wrench 5/8" X 4 1/2"BCF-12 Crowfoot Wrench - Inch 3/8"BCF-14 Crowfoot Wrench - Inch 7/16"BCF-16 Crowfoot Wrench - Inch 1/2"BCF-18 Crowfoot Wrench - Inch 9/16"BCF-20 Crowfoot Wrench - Inch 5/8"BCF-22 Crowfoot Wrench - Inch 11/16"BCF-24 Crowfoot Wrench - Inch 3/4"BCF-26 Crowfoot Wrench - Inch 13/16"BCF-28 Crowfoot Wrench - Inch 7/8"BCF-32 Crowfoot Wrench - Inch 1"BCF-10M Crowfoot Wrench - Metric 10 mmBCF-11M Crowfoot Wrench - Metric 11 mmBCF-12M Crowfoot Wrench - Metric 12 mmBCF-13M Crowfoot Wrench - Metric 13 mmBCF-14M Crowfoot Wrench - Metric 14 mmBCF-15M Crowfoot Wrench - Metric 15 mmBCF-16M Crowfoot Wrench - Metric 16 mmBCF-17M Crowfoot Wrench - Metric 17 mmBCF-19M Crowfoot Wrench - Metric 19 mmBCF-21M Crowfoot Wrench - Metric 21 mmBCF-22M Crowfoot Wrench - Metric 22 mm3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"3132 Ignition Open End Wrench 3/8"3134 Ignition Open End Wrench 7/16"

34835 Torque Wrench49830 Torque WrenchZW-1045A-A Air Conditioning Wrench 1/4" x 3/16" and 1/2" x 9/16"HT-1005-1 Ball Pein Hammer 16ozHT-1007-1 Ball Pein Hammer 24ozHT-1008-1 Ball Pein Hammer 32ozHT-1255 Rubber MalletCT-1003 Cold Chisel 5-1/4" Length, 3/8" EdgeCT-1004 Cold Chisel 5-1/2" Length, 7/16" EdgeCT-1006 Cold Chisel 6-1/2" Length, 5/8" EdgeCT-1456 Pin Punch 5-1/2" Length, 3/16" PointCT-1303 Center Punch 5" Length, 5/32" PointCT-1454 Pin Punch 5-1/4" Length, 5/32" PointCT-1453 Pin Punch 5" Length, 1/8" PointCT-1404 Hand Punch 5" Length, 3/16" EdgeCT-1509 Aligning Punch 11" Length, 1/4" PointCT-1314 Scribing Punch 5" Length, 5/32"CT-1306 Center Punch 6" Length, 1/4" PointCT-1464 Pin Punch 7" Length, 1/4" PointCT-1304 Center Punch 5-1/2" Length, 3/16" PointCT-1254 Diamond Point Chisel 5" Length, 3/16" EdgeCT-1008 Cold Chisel 7" Length, 3/4" EdgeCT-1466 Pin Punch 7" Length, 5/16" PointCT-1204 Round Nose Chisel 5 1/2" Length, 1/4" EdgeCT-1010 Cold Chisel 7-1/2" Length, 7/8" EdgeCT-1554 Long Taper Punch 8-1/2" Length, 5/32" PointCT-1556 Long Taper Punch 9" Length, 3/16" PointCT-1108 Long Cold Chisel 12" Length, 3/4" EdgeCT-1558 Long Taper Punch 11" Length, 5/16" PointCT-1110 Long Cold Chisel 12" Length, 7/8" EdgeCT-1606 Pinch Bar 14"CT-1156 Flat Cape ChiselST-801 Nut Driver 9/32"ST-800 Nut Driver 3/16"ST-803 Nut Driver 1/4"ST-806 Nut Driver 5/16"ST-809 Nut Driver 11/32"ST-812 Nut Driver 3/8"ST-815 Nut Driver 7/16"ST-818 Nut Driver 1/2"ST-905M Nut Driver 5 mmST-955M Nut Driver 5.5 mmST-907M Nut Driver 7 mmST-908M Nut Driver 8 mmST-909M Nut Driver 9 mmST-910M Nut Driver 10 mmST-911M Nut Driver 11 mmST-912M Nut Driver 12 mmST-1183 Offset Screwdriver 3/16"ST-1184 Offset Screwdriver 3/16"ST-1185 Offset Screwdriver 1/4"ST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" TipST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1083S Phillips® Tip Screwdriver 6" Blade, No. 3 Pt.ST-1084S Phillips® Tip Screwdriver 8" Blade, No. 4 Pt.ST-1140S Stubby Phillips® Tip Screwdriver 1-1/2" Blade, No. 2 Pt.ST-1145S Stubby Slotted Tip Screwdriver 1-1/4" Blade, 7/32" TipST-1150S Pocket-Size Slotted Tip Screwdriver W/ Clip 2" Blade, 1/8" TipST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1024S Square Shank Slotted Tip Screwdriver 4" Blade, 1/4" Tip





MA

ST

ER

SE

TS




ST-1026S Square Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1028S Square Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1032S Square Shank Slotted Tip Screwdriver 12" Blade, 3/8" TipST-608S Torx® Screwdriver T8ST-627S Torx® Screwdriver T27ST-610S Torx® Screwdriver T10ST-615S Torx® Screwdriver T15ST-620S Torx® Screwdriver T20ST-625S Torx® Screwdriver T25ST-630S Torx® Screwdriver T309000-TP10 Tamper Resistant T10 Insert Bit9000-TP15 Tamper Resistant T15 Insert Bit9000-TP20 Tamper Resistant T20 Insert Bit9000-TP25 Tamper Resistant T25 Insert Bit9000-TP27 Tamper Resistant T27 Insert Bit900-70 Bit DriverPT-1128-1 6-1/2" Long Nose Sidecutting PlierPT-1002-1 6" Heavy Duty Slip JointPT-1003-1 8" Heavy Duty Slip JointPT-1004-1 10" Heavy Duty Slip JointPT-1107 Straight Jaw Locking PlierPT-1259 7" Battery PlierPT-1263 8" Parrot Nose PlierPT-1106 6" Long Nose Locking PlierPT-1052-1 6" Diagonal Cutting Plier PT-1057-1 7" Heavy-Duty Diagonal Cutting Plier PT-1251 5" Ignition PlierPT-3000 4 Pc Mini Long Reach Plier SetZW-53 13 Pc Hex Key Wrench Set .050- 3/8"ZW-59 13 Pc Long Hex Key Wrench Set ZW-69 9 Pc Metric Hex Key Wrench SetZT-1111 Carbon ScraperZT-1112 Degreasing ScraperZT-1310 Steel Wire Scratch BrushET-1071A Pullers Battery Terminal and Generator Bearing PullerMT-1049 25 Pc All Purpose Feeler GaugeDT-55 5 Pc Screw Extractor SetFT-1202 HacksawFT-1124 10 Pc Hacksaw Blades940-JS 40 Pc Insert Bit Set (J.S. Products)84-597 18 Pc Retaining Ring Plier Set66-039 6 Pc Jeweler Screwdriver Set10-099 Knife11-921 10 Knife Blades28-100 Scraper10-049 Pocket Knife11-040 6 Pc Blades33-212 Tape Measure 12' 68-768 76 Pc Tap & Die Set

Tap Wrench #73Tap Wrench #88Black Midget 401PThread Pitch Gauge MetricThread Pitch Gauge StandardDie Stock #26 1 Single HexTap Wrench #50Die 7/16-20 1 Single Hex Die Stock #57 5/8 Single HexDie 1/2-13 1 Single Hex Die 1/2-20 1 Single Hex Die 1/8-27 NPT 1 Single Hex Die 1/8-28 BSP 1 Single Hex Die 5/16-24 1 Single Hex Die 3/8-16 1 Single Hex Die 3/8-24 1 Single Hex

Die 7/16-14 1 Single Hex Die 12-24 5/8 Single Hex Die 1/4-20 1 Single Hex Die 1/4-28 1 Single Hex Die 5/16-18 1 Single Hex Die 8-32 5/8 Single Hex Die 10-24 5/8 Single Hex Die 10-32 5/8 Single Hex Die 6-32 5/8 Single Hex Die 12mm-1.75 1 Single Hex Die 4-40 5/8 Single Hex Die 10mm-1.5 1 Single Hex Die 11mm-1.5 1 Single Hex Die 12mm-1.5 1 Single Hex Die 9mm-1.25 1 Single Hex Die 10mm-1.25 1 Single Hex Die 8mm-1.25 1 Single Hex Die 9mm-1.0 1 Single Hex Die 7mm-1.0 1 Single Hex Die 8mm-1.0 1 Single Hex Die 5mm-0.9 5/8 Single Hex Die 6mm-1.0 5/8 Single Hex Die 4mm-0.75 5/8 Single Hex Die 5mm-0.8 5/8 Single Hex Die 4mm-0.7 5/8 Single Hex Die 3mm-0.5 5/8 Single Hex Tap 1/2-20 NF PlugTap 1/8-27 NPT PipeTap 1/2-13 NC PlugTap 7/16-20 NF PlugTap 7/16-14 NC PlugTap 3/8-24 NF PlugTap 3/8-16 NC PlugTap 5/16-24 NF PlugTap 1/4-28 NF PlugTap 5/16-18 NC PlugTap 1/4-20 NC PlugTap 12-24 NC Plug Tap 10-32 NF Plug Tap 10-24 NC Plug Tap 8-32 NC PlugTap 6-32 NC Plug Tap 4-40 NC PlugTap 12mm-1.75 PlugTap 12mm-1.5 PlugTap 11mm-1.5 PlugTap 10mm-1.5 PlugTap 10mm-1.25 Plug Tap 9mm-1.25 PlugTap 9mm-1.0 PlugTap 8mm-1.25 Plug Tap 8mm-1.0 PlugTap 7mm-1.0 PlugTap 6mm-1.0 PlugTap 5mm-0.9 PlugTap 5mm-0.8 PlugTap 4mm-0.75 PlugTap 4mm-0.7 PlugTap 3mm-0.5 PlugTap 1/8-28 BSP Pipe





MA

ST

ER

SE

TS






MA

ST

ER

SE

TS




GW-9550 1/4" Drive Spinner34960 1/4" Drive 1/4" X 3/8" Adapter9000H 1/4" Drive Bit HolderGW-9545 1/4" Drive Flexible SpinnerGW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9945B 1/4" Drive Round Head Reversible Ratchet34993 3/8" Drive Universal Joint34963 3/8" Drive 3/8" x 1/4" Adapter34966 3/8" Drive 3/8" x 1/2" Adapter34984 3/8" Drive Extension 11" 34989 3/8" Drive Extension 1-3/4" 34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34945B 3/8" Drive Round Head Reversible Ratchet34965 1/2" Drive 1/2" x 3/8" Adapter69992 1/2" Drive 1/2" x 3/4" Adapter49964 1/2" Drive Extension 2" 49966 1/2" Drive Extension 5" UW-24 1/2" Drive Impact Extension 5" UW-30 1/2" Drive Impact Extension 2-5/8" 49945B 1/2" Drive Round Head Reversible RatchetGW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-1406 12 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1407 12 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1408 12 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1409 12 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1410 12 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1411 12 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1412 12 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1414 12 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1416 12 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-655M 6 Pt. Standard Metric Socket 1/4" Drive 5.5 mm

GW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-755M 12 Pt. Standard Metric Socket 1/4" Drive 5.5 mmGW-706M 12 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mmGW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1605M 12 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-1606M 12 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-1607M 12 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-1608M 12 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-1609M 12 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-1610M 12 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-1611M 12 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-1612M 12 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-1613M 12 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1208 8 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1210 8 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1212 8 Pt. Standard Inch Socket 1/4" Drive 3/8"TS-1209 1/4" Torx® Socket Internal T9TS-1210 1/4" Torx® Socket Internal T10TS-1215 1/4" Torx® Socket Internal T15TS-1220 1/4" Torx® Socket Internal T20TS-1225 1/4" Torx® Socket Internal T25TS-1227 1/4" Torx® Socket Internal T27TS-1230 1/4" Torx® Socket Internal T30TS-1340 3/8" Drive Torx® Socket Internal T40TS-1345 3/8" Drive Torx® Socket Internal T45TS-1347 3/8" Drive Torx® Socket Internal T47TS-1350 3/8" Drive Torx® Socket Internal T50TR-3210 1/4" Tamper-Resistant Torx® Socket Internal T10TR-3215 1/4" Tamper-Resistant Torx® Socket Internal T15TR-3220 1/4" Tamper-Resistant Torx® Socket Internal T20TR-3225 1/4" Tamper-Resistant Torx® Socket Internal T25TR-3227 1/4" Tamper-Resistant Torx® Socket Internal T27TR-3230 1/4" Tamper-Resistant Torx® Socket Internal T30TS-2204 1/4" Torx® Socket External E4TS-2205 1/4" Torx® Socket External E5TS-2206 1/4" Torx® Socket External E6TS-2207 1/4" Torx® Socket External E7TS-2208 3/8" Drive Torx® Socket External E8TS-2310 3/8" Drive Torx® Socket External E10TS-2312 3/8" Drive Torx® Socket External E12

835 PIECE MASTER TOOL SETITEM NO. 97835




MA

ST

ER

SE

TS

TS-2314 3/8" Drive Torx® Socket External E14TS-2316 3/8" Drive Torx® Socket External E1630608 6 Pt. Standard Inch Socket 3/8" Drive 1/4"30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"30632 6 Pt. Standard Inch Socket 3/8" Drive 1"30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"300301 12 Pt. Standard Inch Socket 3/8" Drive 15/16"300321 12 Pt. Standard Inch Socket 3/8" Drive 1"HW-1510 6 Pt. Deep Inch Socket 3/8" Drive 5/16"HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"HW-1530 6 Pt. Deep Inch Socket 3/8" Drive 15/16"HW-1532 6 Pt. Deep Inch Socket 3/8" Drive 1"30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"30432 12 Pt. Deep Inch Socket 3/8" Drive 1"32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm

32021M 6 Pt. Standard Metric Socket 3/8" Drive 21 mm32022M 6 Pt. Standard Metric Socket 3/8" Drive 22 mm34007M 12 Pt. Standard Metric Socket 3/8" Drive 7 mm34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm34020M 12 Pt. Standard Metric Socket 3/8" Drive 20 mm34021M 12 Pt. Standard Metric Socket 3/8" Drive 21 mm34022M 12 Pt. Standard Metric Socket 3/8" Drive 22 mmHW-1507M 6 Pt. Deep Metric Socket 3/8" Drive 7 mmHW-1508M 6 Pt. Deep Metric Socket 3/8" Drive 8 mmHW-1509M 6 Pt. Deep Metric Socket 3/8" Drive 9 mmHW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1518M 6 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mmHW-1607M 12 Pt. Deep Metric Socket 3/8" Drive 7 mmHW-1608M 12 Pt. Deep Metric Socket 3/8" Drive 8 mmHW-1609M 12 Pt. Deep Metric Socket 3/8" Drive 9 mmHW-1610M 12 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1611M 12 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1612M 12 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1613M 12 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1614M 12 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1615M 12 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1616M 12 Pt. Deep Metric Socket 3/8" Drive 16 mmHW-1617M 12 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1618M 12 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1619M 12 Pt. Deep Metric Socket 3/8" Drive 19 mm31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"HW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"HW-9504 Slotted Screwdriver Bit Socket 3/16" Tip WidthHW-9505 Slotted Screwdriver Bit Socket 1/4" Tip WidthHW-9506 Slotted Screwdriver Bit Socket 5/16" Tip WidthHW-9450 Phillips® Screwdriver Bit Socket No. 1HW-9451 Phillips® Screwdriver Bit Socket No. 2HW-9452 Phillips® Screwdriver Bit Socket No. 3HW-9453 Phillips® Screwdriver Bit Socket No. 4HW-9442 3/8" Drive Hex Bit Socket Inch 1/8"HW-9443 3/8" Drive Hex Bit Socket Inch 9/64"HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"HW-9449 3/8" Drive Hex Bit Socket Inch 3/16"HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"






MA

ST

ER

SE

TS




HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"HW-9404M 3/8" Drive Hex Bit Socket Metric 4 mmHW-9405M 3/8" Drive Hex Bit Socket Metric 5 mmHW-9406M 3/8" Drive Hex Bit Socket Metric 6 mmHW-9407M 3/8" Drive Hex Bit Socket Metric 7 mmHW-9408M 3/8" Drive Hex Bit Socket Metric 8 mmHW-9410M 3/8" Drive Hex Bit Socket Metric 10 mm40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"40632 6 Pt. Standard Inch Socket 1/2" Drive 1"40634 6 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40636 6 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40640 6 Pt. Standard Inch Socket 1/2" Drive 1-1/4"40642A 6 Pt. Standard Inch Socket 1/2" Drive 1-1/2"40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40138 12 Pt. Standard Inch Socket 1/2" Drive 1-3/16"40144A 12 Pt. Standard Inch Socket 1/2" Drive 1-1/2"40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"40332 12 Pt. Deep Inch Socket 1/2" Drive 1"40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40336 12 Pt. Deep Inch Socket 1/2" Drive 1-18"42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm43023M 6 Pt. Standard Metric Socket 1/2" Drive 23 mm43024M 6 Pt. Standard Metric Socket 1/2" Drive 24 mm43027M 6 Pt. Standard Metric Socket 1/2" Drive 27 mm43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm

43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm42020M 12 Pt. Standard Metric Socket 1/2" Drive 20 mm42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm42023M 12 Pt. Standard Metric Socket 1/2" Drive 23 mm42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm42025M 12 Pt. Standard Metric Socket 1/2" Drive 25 mm42026M 12 Pt. Standard Metric Socket 1/2" Drive 26 mm42027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm42028M 12 Pt. Standard Metric Socket 1/2" Drive 28 mm42030M 12 Pt. Standard Metric Socket 1/2" Drive 30 mm45010M 6 Pt. Deep Metric Socket 1/2" Drive 10 mm45011M 6 Pt. Deep Metric Socket 1/2" Drive 11 mm45012M 6 Pt. Deep Metric Socket 1/2" Drive 12 mm45013M 6 Pt. Deep Metric Socket 1/2" Drive 13 mm45014M 6 Pt. Deep Metric Socket 1/2" Drive 14 mm45015M 6 Pt. Deep Metric Socket 1/2" Drive 15 mm45016M 6 Pt. Deep Metric Socket 1/2" Drive 16 mm45017M 6 Pt. Deep Metric Socket 1/2" Drive 17 mm45018M 6 Pt. Deep Metric Socket 1/2" Drive 18 mm45019M 6 Pt. Deep Metric Socket 1/2" Drive 19 mm45020M 6 Pt. Deep Metric Socket 1/2" Drive 20 mm45021M 6 Pt. Deep Metric Socket 1/2" Drive 21 mm45022M 6 Pt. Deep Metric Socket 1/2" Drive 22 mm45023M 6 Pt. Deep Metric Socket 1/2" Drive 23 mm44012M 12 Pt. Deep Metric Socket 1/2" Drive 12 mm44013M 12 Pt. Deep Metric Socket 1/2" Drive 13 mm44014M 12 Pt. Deep Metric Socket 1/2" Drive 14 mm44015M 12 Pt. Deep Metric Socket 1/2" Drive 15 mm44016M 12 Pt. Deep Metric Socket 1/2" Drive 16 mm44017M 12 Pt. Deep Metric Socket 1/2" Drive 17 mm44018M 12 Pt. Deep Metric Socket 1/2" Drive 18 mm44019M 12 Pt. Deep Metric Socket 1/2" Drive 19 mm44020M 12 Pt. Deep Metric Socket 1/2" Drive 20 mm44021M 12 Pt. Deep Metric Socket 1/2" Drive 21 mm44022M 12 Pt. Deep Metric Socket 1/2" Drive 22 mm44023M 12 Pt. Deep Metric Socket 1/2" Drive 23 mm44024M 12 Pt. Deep Metric Socket 1/2" Drive 24 mm44025M 12 Pt. Deep Metric Socket 1/2" Drive 25 mm44026M 12 Pt. Deep Metric Socket 1/2" Drive 26 mm44027M 12 Pt. Deep Metric Socket 1/2" Drive 27 mm40326S 1/2" Drive Spark Plug Socket 13/16"40320S 1/2" Drive Spark Plug Socket 5/8"U-1508 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/4"U-1510 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/16"U-1512 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/8"U-1514 6 Pt. Standard Inch Impact Socket 3/8" Drive 7/16"U-1516 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/2"U-1518 6 Pt. Standard Inch Impact Socket 3/8" Drive 9/16"U-1520 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/8"U-1522 6 Pt. Standard Inch Impact Socket 3/8" Drive 11/16"U-1524 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/4"U-1508M 6 Pt. Standard Metric Impact Socket 3/8" Drive 8 mmU-1509M 6 Pt. Standard Metric Impact Socket 3/8" Drive 9 mmU-1510M 6 Pt. Standard Metric Impact Socket 3/8" Drive 10 mmU-1512M 6 Pt. Standard Metric Impact Socket 3/8" Drive 12 mmU-1513M 6 Pt. Standard Metric Impact Socket 3/8" Drive 13 mmU-1514M 6 Pt. Standard Metric Impact Socket 3/8" Drive 14 mm





MA

ST

ER

SE

TS

U-1515M 6 Pt. Standard Metric Impact Socket 3/8" Drive 15 mmU-1517M 6 Pt. Standard Metric Impact Socket 3/8" Drive 17 mmU-1518M 6 Pt. Standard Metric Impact Socket 3/8" Drive 18 mmU-1519M 6 Pt. Standard Metric Impact Socket 3/8" Drive 19 mmU-1610 6 Pt. Deep Inch Impact Socket 3/8" Drive 5/16"U-1612 6 Pt. Deep Inch Impact Socket 3/8" Drive 3/8"U-1614 6 Pt. Deep Inch Impact Socket 3/8" Drive 7/16"U-1616 6 Pt. Deep Inch Impact Socket 3/8" Drive 1/2"U-1618 6 Pt. Deep Inch Impact Socket 3/8" Drive 9/16"U-1620 6 Pt. Deep Inch Impact Socket 3/8" Drive 5/8"U-1622 6 Pt. Deep Inch Impact Socket 3/8" Drive 11/16"U-1624 6 Pt. Deep Inch Impact Socket 3/8" Drive 3/4"U-1608M 6 Pt. Deep Metric Impact Socket 3/8" Drive 8 mmU-1609M 6 Pt. Deep Metric Impact Socket 3/8" Drive 9 mmU-1610M 6 Pt. Deep Metric Impact Socket 3/8" Drive 10 mmU-1611M 6 Pt. Deep Metric Impact Socket 3/8" Drive 11 mmU-1612M 6 Pt. Deep Metric Impact Socket 3/8" Drive 12 mmU-1613M 6 Pt. Deep Metric Impact Socket 3/8" Drive 13 mmU-1614M 6 Pt. Deep Metric Impact Socket 3/8" Drive 14 mmU-1615M 6 Pt. Deep Metric Impact Socket 3/8" Drive 15 mmU-1616M 6 Pt. Deep Metric Impact Socket 3/8" Drive 16 mmU-1617M 6 Pt. Deep Metric Impact Socket 3/8" Drive 17 mmU-1618M 6 Pt. Deep Metric Impact Socket 3/8" Drive 18 mmU-1619M 6 Pt. Deep Metric Impact Socket 3/8" Drive 19 mmUW-1612 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/8"UW-1614 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/16"UW-1616 6 Pt. Standard Inch Impact Socket 1/2" Drive 1/2"UW-1618 6 Pt. Standard Inch Impact Socket 1/2" Drive 9/16"UW-1620 6 Pt. Standard Inch Impact Socket 1/2" Drive 5/8"UW-1622 6 Pt. Standard Inch Impact Socket 1/2" Drive 11/16"UW-1624 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/4"UW-1626 6 Pt. Standard Inch Impact Socket 1/2" Drive 13/16"UW-1628 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/8"UW-1630 6 Pt. Standard Inch Impact Socket 1/2" Drive 15/16"UW-1632 6 Pt. Standard Inch Impact Socket 1/2" Drive 1"UW-1634 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/16"UW-1516 6 Pt. Deep Inch Impact Socket 1/2" Drive 1/2"UW-1518 6 Pt. Deep Inch Impact Socket 1/2" Drive 9/16"UW-1520 6 Pt. Deep Inch Impact Socket 1/2" Drive 5/8"UW-1522 6 Pt. Deep Inch Impact Socket 1/2" Drive 11/16"UW-1524 6 Pt. Deep Inch Impact Socket 1/2" Drive 3/4"UW-1526 6 Pt. Deep Inch Impact Socket 1/2" Drive 13/16"UW-1528 6 Pt. Deep Inch Impact Socket 1/2" Drive 7/8"UW-1530 6 Pt. Deep Inch Impact Socket 1/2" Drive 15/16"UW-1532 6 Pt. Deep Inch Impact Socket 1/2" Drive 1"UW-1534 6 Pt. Deep Inch Impact Socket 1/2" Drive 1-1/16"UW-610M 6 Pt. Standard Metric Impact Socket 1/2" Drive 10 mmUW-611M 6 Pt. Standard Metric Impact Socket 1/2" Drive 11 mmUW-612M 6 Pt. Standard Metric Impact Socket 1/2" Drive 12 mmUW-613M 6 Pt. Standard Metric Impact Socket 1/2" Drive 13 mmUW-614M 6 Pt. Standard Metric Impact Socket 1/2" Drive 14 mmUW-615M 6 Pt. Standard Metric Impact Socket 1/2" Drive 15 mmUW-616M 6 Pt. Standard Metric Impact Socket 1/2" Drive 16 mmUW-617M 6 Pt. Standard Metric Impact Socket 1/2" Drive 17 mmUW-618M 6 Pt. Standard Metric Impact Socket 1/2" Drive 18 mmUW-510M 6 Pt. Deep Metric Impact Socket 1/2" Drive 10 mmUW-511M 6 Pt. Deep Metric Impact Socket 1/2" Drive 11 mmUW-512M 6 Pt. Deep Metric Impact Socket 1/2" Drive 12 mmUW-513M 6 Pt. Deep Metric Impact Socket 1/2" Drive 13 mmUW-514M 6 Pt. Deep Metric Impact Socket 1/2" Drive 14 mmUW-515M 6 Pt. Deep Metric Impact Socket 1/2" Drive 15 mmUW-516M 6 Pt. Deep Metric Impact Socket 1/2" Drive 16 mmUW-517M 6 Pt. Deep Metric Impact Socket 1/2" Drive 17 mmUW-518M 6 Pt. Deep Metric Impact Socket 1/2" Drive 18 mm

UW-519M 6 Pt. Deep Metric Impact Socket 1/2" Drive 19 mmUW-520M 6 Pt. Deep Metric Impact Socket 1/2" Drive 20 mmBW-1156 Satin Finish - Combination Wrench 1/4"BW-1159 Satin Finish - Combination Wrench 5/16"BW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1165 Satin Finish - Combination Wrench 11/16"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1106M Satin Finish - Combination Wrench Metric 6 mmBW-1107M Satin Finish - Combination Wrench Metric 7 mmBW-1108M Satin Finish - Combination Wrench Metric 8 mmBW-1109M Satin Finish - Combination Wrench Metric 9 mmBW-1110M Satin Finish - Combination Wrench Metric 10 mmBW-1111M Satin Finish - Combination Wrench Metric 11 mmBW-1112M Satin Finish - Combination Wrench Metric 12 mmBW-1113M Satin Finish - Combination Wrench Metric 13 mmBW-1114M Satin Finish - Combination Wrench Metric 14 mmBW-1115M Satin Finish - Combination Wrench Metric 15 mmBW-1116M Satin Finish - Combination Wrench Metric 16 mmBWE-67MP Full Polish - Open End Wrench Metric 6 mm X 7 mm BWE-89MP Full Polish - Open End Wrench Metric 8 mm X 9 mmBWE-1011MP Full Polish - Open End Wrench Metric 10 mm X 11 mmBWE-1213MP Full Polish - Open End Wrench Metric 12 mm X 13 mmBWE-1415MP Full Polish - Open End Wrench Metric 14 mm X 15 mmBWE-1617MP Full Polish - Open End Wrench Metric 16 mm X 17 mmBWE-1819MP Full Polish - Open End Wrench Metric 18 mm X 19 mmBWE-2022MP Full Polish - Open End Wrench Metric 20 mm X 22 mm4020P Full Polish - Open End Wrench Inch 1/4" X 5/16"4723P Full Polish - Open End Wrench Inch 3/8" X 7/16"4724P Full Polish - Open End Wrench Inch 7/16" X 1/2"4725P Full Polish - Open End Wrench Inch 1/2" X 9/16"4727P Full Polish - Open End Wrench Inch 5/8" X 11/16"4728P Full Polish - Open End Wrench Inch 11/16" X 3/4"4732P Full Polish - Open End Wrench Inch 13/16" X 7/8"FN-1402P Flare Nut Wrench - Inch 3/8" X 7/16"FN-1404P Flare Nut Wrench - Inch 1/2" X 9/16"FN-1406P Flare Nut Wrench - Inch 5/8" X 11/16"FN-911MP Flare Nut Wrench - Metric 9 mm X 11 mmFN-1012MP Flare Nut Wrench - Metric 10 mm X 12 mmFN-1314MP Flare Nut Wrench - Metric 13 mm X 14 mm3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"3132 Ignition Open End Wrench 3/8"3134 Ignition Open End Wrench 7/16"9000-A Adapter Socket900-20 Insert Bit # 0 Pt. Phillips®

900-21 Insert Bit # 1 Pt. Phillips®



900-0 Insert Bit Slotted Bit, 7/64"900-5 Insert Bit Slotted Bit, 7/32"900-1 Insert Bit Slotted Bit, 1/8"900-2 Insert Bit Slotted Bit, 9/64"900-8 Insert Bit Slotted Bit, 5/16"900-3 Insert Bit Slotted Bit, 5/32"






MA

ST

ER

SE

TS




900-4 Insert Bit Slotted Bit, 3/16"900-6 Insert Bit Slotted Bit, 1/4"900-7 Insert Bit Slotted Bit, 9/32"900-30 Insert Bit Square Head, #0900-31 Insert Bit Square Head, #1900-32 Insert Bit Square Head, #2900-33 Insert Bit Square Head, #3900-40 Insert Bit Reed Prince #0 (Pozi)900-41 Insert Bit Reed Prince #1 (Pozi)900-42 Insert Bit Reed Prince #2 (Pozi)900-43 Insert Bit Reed Prince #3 (Pozi)900-51 Insert Bit Phillips® ARC, #1900-52 Insert Bit Phillips® ARC, #2900-53 Insert Bit Phillips® ARC, #39000-TP10 Insert Bit Tamper Resistant T109000-TP15 Insert Bit Tamper Resistant T159000-TP20 Insert Bit Tamper Resistant T209000-TP25 Insert Bit Tamper Resistant T259000-TP27 Insert Bit Tamper Resistant T27900-60 Hex Bit, 5/64"900-61 Hex Bit, 1/8"900-62 Hex Bit, 5/32900-63 Hex Bit, 3/16"900-64 Hex Bit, 1/4"9000-T6 Torx® Bit T69000-T7 Torx® Bit T79000-T8 Torx® Bit T89000-T10 Torx® Bit T109000-T15 Torx® Bit T159000-T20 Torx® Bit T209000-T25 Torx® Bit T259000-T27 Torx® Bit T279000-T30 Torx® Bit T309000-T40 Torx® Bit T40PT-1128-1 6" Long Nose Sidecutting PlierPT-1052-1 6" Diagonal Cutting PlierPT-1003-1 8" Heavy Duty Slip JointPT-1251 5" Ignition PlierPT-1004-1 10" Heavy Duty Slip JointPT-1002-1 6" Heavy Duty Slip JointPT-1108-1 Lieman's PliersPT-1287 External Retaining Ring PliersPT-1288 Internal Retaining Ring PliersCT-114 14 Pc Chisel and Punch SetCT-1303 Center Punch 5" Length, 5/32" PointCT-1306 Center Punch 6" Length, 1/4" PointCT-1404 Hand Punch 3/8" L 5"CT-1554 Long Taper Punch 1/2 L 8-1/2"CT-1556 Long Taper Punch 1/2" L 9"CT-1108 Long Cold Chisel 3/4" L12"CT-1110 Long Cold Chisel 7/8" L12"ST-801 Nut Driver Inch 9/32"ST-800 Nut Driver Inch 3/16"ST-803 Nut Driver Inch 1/4"ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"ST-818 Nut Driver Inch 1/2"ST-904M Nut Driver Metric 4 mmST-905M Nut Driver Metric 5 mmST-955M Nut Driver Metric 5.5 mmST-907M Nut Driver Metric 7 mmST-908M Nut Driver Metric 8 mm

ST-909M Nut Driver Metric 9 mmST-910M Nut Driver Metric 10 mmST-911M Nut Driver Metric 11 mmST-912M Nut Driver Metric 12 mmST-1183 Offset Screwdriver 3/16"ST-1184 Offset Screwdriver 3/16"ST-1185 Offset Screwdriver 1/4"ST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" TipST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1083S Phillips® Tip Screwdriver 6" Blade, No. 3 Pt.ST-1084S Phillips® Tip Screwdriver 8" Blade, No. 4 Pt.ST-1140S Stubby Phillips® Tip Screwdriver 1-1/2" Blade, No. 2 Pt.ST-1145S Stubby Slotted Tip Screwdriver 1-1/4" Blade, 7/32" TipST-1150S Pocket-Size Slotted Tip Screwdriver With Clip 2" Blade, 1/8" TipST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1024S Square Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1026S Square Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1028S Square Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1032S Square Shank Slotted Tip Screwdriver 12" Blade, 3/8" TipST-608S Torx® Screwdriver T8ST-627S Torx® Screwdriver T27ST-610S Torx® Screwdriver T10ST-615S Torx® Screwdriver T15ST-620S Torx® Screwdriver T20ST-625S Torx® Screwdriver T25ST-630S Torx® Screwdriver T30ZW-53 13 Pc Hex Key Wrench Set .050- 3/8"ZW-59 13 Pc Long Hex Key Wrench Set ZW-69 9 Pc Metric Hex Key Wrench SetHT-1005-1 Ball Pein Hammer 16ozHT-1452 Soft Face Hammer 5oz.MT-1049 All Purpose Feeler GaugeMT-1024 Spark Plug and Ignition Feeler GaugeMT-1026A 6-Wire High Energy Spark Plug Feeler GaugeMT-1027A 7-Wire Spark Plug Feeler GaugeST-1250 Inspection MirrorST-1214 Spark Detector ScrewdriverZT-1301 Carbon Cleaning End BrushZT-1300 Heavy-Duty Knot End Cleaning BrushZT-1312 Heavy-Duty Scratch Brush With ScraperZT-1310 Steel Wire Scratch BrushZT-1111 Carbon ScraperZT-1112 Degreasing Scraper84-597 18 Pc Retaining Ring Plier Set10-099 Knife11-921 10 Heavy Duty Utility Blades11-987 10 Round Point Utility Blades33-212 Tape Measure 12"10-049 Pocket Knife11-040 Blades (Qty. 10)FT-1202 HacksawFT-1124 10 Pc Hacksaw Blades68-768 76 Pc Tap and Die SetDT-55 5 Pc Screw Extractor Set





MA

ST

ER

SE

TS





MA

ST

ER

SE

TS




GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"




















GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"









GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mm

GW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mm




















GW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mm










GW-9945B 1/4" Drive Round Head Reversible Ratchet

GW-9550 1/4" Drive Spinner

34960 1/4" Drive 1/4" X 3/8" Adapter

GW-9898 1/4" Drive Extension 3"


GW-9749B 1/4" Drive Flex Handle Ratchet

30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"










30632 6 Pt. Standard Inch Socket 3/8" Drive 1"






HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"









U-1508 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/4"








30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"










30432 12 Pt. Deep Inch Socket 3/8" Drive 1"





MA

ST

ER

SE

TS

30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"










32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm































U-1510M 6 Pt. Standard Metric Impact Socket 3/8" Drive 10 mm








HW-9404M 3/8" Drive Hex Bit Socket Metric 4 mm






HW-9450 Phillips® Screwdriver Bit Socket No. 1


HW-9405 Slotted Screwdriver Bit Socket 5/16" Tip Width




HW-9442 3/8" Drive Hex Bit Socket Inch 1/8"








34989 3/8" Drive Extension 1-3/4"

34983 3/8" Drive Extension 19"

30320S 3/8" Drive Spark Plug Socket 5/8" Universal

30326 3/8" Drive Spark Plug Socket 13/16" Universal

34945B 3/8" Drive Round Head Reversible Ratchet



34993 3/8" Drive Universal Joint

34963 3/8" Drive 3/8" x 1/4" Adapter

HW-1520S 3/8" Drive Spark Plug Socket 5/8"













40634 6 Pt. Standard Inch Socket 1/2" Drive 1-1/16"
























MA

ST

ER

SE

TS




















UW-1614 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/16"









UW-1632 6 Pt. Standard Inch Impact Socket 1/2" Drive 1"

UW-1634 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/16"



























44010M 12 Pt. Deep Metric Socket 1/2" Drive 10 mm


















UW-614M 6 Pt. Standard Metric Impact Socket 1/2" Drive 14 mm










40320S 1/2" Drive Spark Plug Socket 5/8"

40326S 1/2" Drive Spark Plug Socket 13/16"

69992 1/2" Drive 1/2" x 3/4" Adapter






34965 1/2" Drive 1/2" x 3/8" Adapter

























MA

ST

ER

SE

TS




49991 3/4" Drive 3/4" x 1/2" Adapter


BW-1160 Satin Finish - Combination Wrench 3/8"







BW-1167A Satin Finish - Combination Wrench 13/16"



BW-1170 Satin Finish - Combination Wrench 1"

BW-1106M Satin Finish - Combination Wrench Metric 6 mm











4020P Full Polish - Open End Wrench Inch 1/4" X 5/16"







4033P Full Polish - Open End Wrench Inch 15/16" X 1"

BCF-12 Crowfoot Wrench - Inch 3/8"









BCF-32 Crowfoot Wrench - Inch 1"

BCF-10M Crowfoot Wrench - Metric 10 mm










AW-1004-1 Adjustable Wrench 4"



FN-1402P Flare Nut Wrench - Inch 3/8" X 7/16"



FN-1410P Flare Nut Wrench - Inch 3/4" X 1"

FN-1012MP Flare Nut Wrench - Metric 10 mm X 12 mm




BWS-1202P Box End Wrench Long - Inch 5/16" X 3/8"





BWS-1218P Box End Wrench Long - Inch 15/16" X 1"

3114 Ignition Open End Wrench 13/64"










CT-114 14 Pc. Chisel and Punch Set

CT-1509 Aligning Punch 11" Length, 1/4" Point

CT-1108 Long Cold Chisel 3/4" L 12"

CT-1110 Long Cold Chisel 7/8" L 12"

CT-1404 Hand Punch 3/8" L 5"

CT-1554 Long Taper Punch 1/2" L 8-1/2"

CT-1556 Long Taper Punch 1/2" L 9"

CT-1558 Long Taper Punch 5/8" L 11"

CT-1303 Center Punch 3/8" L5"

CT-1306 Center Punch 1/2" L6"

ZW-59 13 Pc. Long Hex Key Wrench Set

ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"

ZW-69 9 Pc. Metric Hex Key Wrench Set

PT-1251 5" Ignition Plier

PT-1052-1 6" Diagonal Cutting Plier

PT-1002-1 6" Heavy Duty Slip Joint



84-597 18 Piece Retaining Ring Plier Set

ST-803 Nut Driver Inch 1/4"






ST-905M Nut Driver Metric 5 mm

ST-955M Nut Driver Metric 5.5 mm







MA

ST

ER

SE

TS







ST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" Tip



ST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.




ST-1140S Stubby Phillips® Tip Screwdriver 1-1/2" Blade, No. 2 Pt.

ST-1145S Stubby Slotted Tip Screwdriver 1-1/4" Blade, 7/32" Tip

ST-1150S Pocket-Size Slotted Tip Screwdriver With Clip 2" Blade, 1/8" Tip

ST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" Tip



ST-1024S Square Shank Slotted Tip Screwdriver 4" Blade, 1/4" Tip



ST-610S Torx® Screwdriver T10





9000-A Adapter Socket





900-0 Insert Bit Slotted 7/64"









900-30 Insert Bit Square Head, #0




900-40 Insert Bit Reed Prince #0 (Pozi)




900-51 Insert Bit Phillips® ARC, #1



9000-TP10 Insert Bit Tamper Resistant T10





900-60 Hex Bit, 5/64"

900-61 Hex Bit, 1/8"

900-62 Hex Bit, 5/32

900-63 Hex Bit, 3/16"

900-64 Hex Bit, 1/4"

9000-T6 Torx® Bit T6










MT-1049 All Purpose Feeler Gauge

FT-1202 Hacksaw

FT-1124 10 Pc Hacksaw Blades

DT-55 5 Pc Screw Extractor Set

33-212 Tape Measure 12'

10-099 Knife

11-921 10 Heavy Duty Utility Blades





MA

ST

ER

SE

TS






GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mm

GW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-755M 12 Pt. Standard Metric Socket 1/4" Drive 5.5 mmGW-706M 12 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mm



MA

ST

ER

SE

TS




GW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-1406 12 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1407 12 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1408 12 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1409 12 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1410 12 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1411 12 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1412 12 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1414 12 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1416 12 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mmGW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1605M 12 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-1606M 12 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-1607M 12 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-1608M 12 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-1609M 12 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-1610M 12 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-1611M 12 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-1612M 12 Pt. Deep Metric Socket 1/4" Drive 12 mm GW-1613M 12 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-1208 8 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1210 8 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1212 8 Pt. Standard Inch Socket 1/4" Drive 3/8"TS-1210 1/4" Torx® Socket Internal T10TS-1215 1/4" Torx® Socket Internal T15TS-1220 1/4" Torx® Socket Internal T20TS-1225 1/4" Torx® Socket Internal T25TS-1227 1/4" Torx® Socket Internal T27TS-1230 1/4" Torx® Socket Internal T30GW-9945B 1/4" Drive Round Head Reversible Ratchet34960 1/4" Drive 1/4" X 3/8" AdapterGW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9749B 1/4" Drive Flex Handle RatchetGW-9550 1/4" Drive Spinner30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"

30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"30632 6 Pt. Standard Inch Socket 3/8" Drive 1"31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm32021M 6 Pt. Standard Metric Socket 3/8" Drive 21 mm34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm34020M 12 Pt. Standard Metric Socket 3/8" Drive 20 mm34021M 12 Pt. Standard Metric Socket 3/8" Drive 21 mm34022M 12 Pt. Standard Metric Socket 3/8" Drive 22 mmHW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"





MA

ST

ER

SE

TS

30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"30432 12 Pt. Deep Inch Socket 3/8" Drive 1"U-1508 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/4"U-1510 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/16"U-1512 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/8"U-1514 6 Pt. Standard Inch Impact Socket 3/8" Drive 7/16"U-1516 6 Pt. Standard Inch Impact Socket 3/8" Drive 1/2"U-1518 6 Pt. Standard Inch Impact Socket 3/8" Drive 9/16"U-1520 6 Pt. Standard Inch Impact Socket 3/8" Drive 5/8"U-1522 6 Pt. Standard Inch Impact Socket 3/8" Drive 11/16"U-1524 6 Pt. Standard Inch Impact Socket 3/8" Drive 3/4"U-1508M 6 Pt. Standard Metric Impact Socket 3/8" Drive 8 mmU-1509M 6 Pt. Standard Metric Impact Socket 3/8" Drive 9 mmU-1510M 6 Pt. Standard Metric Impact Socket 3/8" Drive 10 mmU-1512M 6 Pt. Standard Metric Impact Socket 3/8" Drive 12 mmU-1513M 6 Pt. Standard Metric Impact Socket 3/8" Drive 13 mmU-1514M 6 Pt. Standard Metric Impact Socket 3/8" Drive 14 mmU-1515M 6 Pt. Standard Metric Impact Socket 3/8" Drive 15 mmU-1517M 6 Pt. Standard Metric Impact Socket 3/8" Drive 17 mmU-1518M 6 Pt. Standard Metric Impact Socket 3/8" Drive 18 mmU-1519M 6 Pt. Standard Metric Impact Socket 3/8" Drive 19 mmU-1608M 6 Pt. Deep Metric Impact Socket 3/8" Drive 8 mmU-1609M 6 Pt. Deep Metric Impact Socket 3/8" Drive 9 mmU-1610M 6 Pt. Deep Metric Impact Socket 3/8" Drive 10 mmU-1611M 6 Pt. Deep Metric Impact Socket 3/8" Drive 11 mmU-1612M 6 Pt. Deep Metric Impact Socket 3/8" Drive 12 mmU-1613M 6 Pt. Deep Metric Impact Socket 3/8" Drive 13 mmU-1614M 6 Pt. Deep Metric Impact Socket 3/8" Drive 14 mmU-1615M 6 Pt. Deep Metric Impact Socket 3/8" Drive 15 mmU-1616M 6 Pt. Deep Metric Impact Socket 3/8" Drive 16 mmU-1617M 6 Pt. Deep Metric Impact Socket 3/8" Drive 17 mmU-1618M 6 Pt. Deep Metric Impact Socket 3/8" Drive 18 mmU-1619M 6 Pt. Deep Metric Impact Socket 3/8" Drive 19 mmHW-9442 3/8" Drive Hex Bit Socket Inch 1/8"HW-9443 3/8" Drive Hex Bit Socket Inch 9/64"HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"HW-9449 3/8" Drive Hex Bit Socket Inch 3/16"HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"HW-9404M 3/8" Drive Hex Bit Socket Metric 4 mmHW-9405M 3/8" Drive Hex Bit Socket Metric 5 mmHW-9406M 3/8" Drive Hex Bit Socket Metric 6 mmHW-9407M 3/8" Drive Hex Bit Socket Metric 7 mmHW-9408M 3/8" Drive Hex Bit Socket Metric 8 mmHW-9410M 3/8" Drive Hex Bit Socket Metric 10 mmHW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"30320S 3/8" Drive Spark Plug Socket 5/8" Universal30326 3/8" Drive Spark Plug Socket 13/16" Universal34945B 3/8" Drive Round Head Reversible Ratchet

34989 3/8" Drive Extension 1-3/4" 34983 3/8" Drive Extension 19" 34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34993 3/8" Drive Universal Joint34982 3/8" Drive Speeder Handle Ratchet 34986B 3/8" Drive Flex Handle Ratchet 34963 3/8" Drive 3/8" x 1/4" Adapter40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"40632 6 Pt. Standard Inch Socket 1/2" Drive 1"40634 6 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40636 6 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40138 12 Pt. Standard Inch Socket 1/2" Drive 1-3/16"40140 12 Pt. Standard Inch Socket 1/2" Drive 1-1/4"42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm43023M 6 Pt. Standard Metric Socket 1/2" Drive 23 mm43024M 6 Pt. Standard Metric Socket 1/2" Drive 24 mm43027M 6 Pt. Standard Metric Socket 1/2" Drive 27 mm43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm42020M 12 Pt. Standard Metric Socket 1/2" Drive 20 mm





MA

ST

ER

SE

TS




42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm42023M 12 Pt. Standard Metric Socket 1/2" Drive 23 mm42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm42025M 12 Pt. Standard Metric Socket 1/2" Drive 25 mm42026M 12 Pt. Standard Metric Socket 1/2" Drive 26 mm42027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm42028M 12 Pt. Standard Metric Socket 1/2" Drive 28 mm42030M 12 Pt. Standard Metric Socket 1/2" Drive 30 mm42032M 12 Pt. Standard Metric Socket 1/2" Drive 32 mm42036M 12 Pt. Standard Metric Socket 1/2" Drive 36 mmUW-1614 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/16"UW-1616 6 Pt. Standard Inch Impact Socket 1/2" Drive 1/2"UW-1618 6 Pt. Standard Inch Impact Socket 1/2" Drive 9/16"UW-1620 6 Pt. Standard Inch Impact Socket 1/2" Drive 5/8"UW-1622 6 Pt. Standard Inch Impact Socket 1/2" Drive 11/16"UW-1624 6 Pt. Standard Inch Impact Socket 1/2" Drive 3/4"UW-1626 6 Pt. Standard Inch Impact Socket 1/2" Drive 13/16"UW-1628 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/8"UW-1630 6 Pt. Standard Inch Impact Socket 1/2" Drive 15/16"UW-1632 6 Pt. Standard Inch Impact Socket 1/2" Drive 1"UW-1634 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/16"UW-614M 6 Pt. Standard Metric Impact Socket 1/2" Drive 14 mmUW-615M 6 Pt. Standard Metric Impact Socket 1/2" Drive 15 mmUW-616M 6 Pt. Standard Metric Impact Socket 1/2" Drive 16 mmUW-617M 6 Pt. Standard Metric Impact Socket 1/2" Drive 17 mmUW-618M 6 Pt. Standard Metric Impact Socket 1/2" Drive 18 mmUW-619M 6 Pt. Standard Metric Impact Socket 1/2" Drive 19 mmUW-620M 6 Pt. Standard Metric Impact Socket 1/2" Drive 20 mmUW-621M 6 Pt. Standard Metric Impact Socket 1/2" Drive 21 mmUW-622M 6 Pt. Standard Metric Impact Socket 1/2" Drive 22 mmUW-624M 6 Pt. Standard Metric Impact Socket 1/2" Drive 24 mmUW-627M 6 Pt. Standard Metric Impact Socket 1/2" Drive 27 mmUW-514M 6 Pt. Deep Metric Impact Socket 1/2" Drive 14 mmUW-515M 6 Pt. Deep Metric Impact Socket 1/2" Drive 15 mmUW-516M 6 Pt. Deep Metric Impact Socket 1/2" Drive 16 mmUW-517M 6 Pt. Deep Metric Impact Socket 1/2" Drive 17 mmUW-518M 6 Pt. Deep Metric Impact Socket 1/2" Drive 18 mmUW-519M 6 Pt. Deep Metric Impact Socket 1/2" Drive 19 mmUW-520M 6 Pt. Deep Metric Impact Socket 1/2" Drive 20 mmUW-521M 6 Pt. Deep Metric Impact Socket 1/2" Drive 21 mmUW-522M 6 Pt. Deep Metric Impact Socket 1/2" Drive 22 mmUW-524M 6 Pt. Deep Metric Impact Socket 1/2" Drive 24 mmUW-527M 6 Pt. Deep Metric Impact Socket 1/2" Drive 27 mm44010M 12 Pt. Deep Metric Socket 1/2" Drive 10 mm44011M 12 Pt. Deep Metric Socket 1/2" Drive 11 mm44012M 12 Pt. Deep Metric Socket 1/2" Drive 12 mm44013M 12 Pt. Deep Metric Socket 1/2" Drive 13 mm44014M 12 Pt. Deep Metric Socket 1/2" Drive 14 mm44015M 12 Pt. Deep Metric Socket 1/2" Drive 15 mm44016M 12 Pt. Deep Metric Socket 1/2" Drive 16 mm44017M 12 Pt. Deep Metric Socket 1/2" Drive 17 mm44018M 12 Pt. Deep Metric Socket 1/2" Drive 18 mm44019M 12 Pt. Deep Metric Socket 1/2" Drive 19 mm44020M 12 Pt. Deep Metric Socket 1/2" Drive 20 mm44021M 12 Pt. Deep Metric Socket 1/2" Drive 21 mm44022M 12 Pt. Deep Metric Socket 1/2" Drive 22 mm44023M 12 Pt. Deep Metric Socket 1/2" Drive 23 mm44024M 12 Pt. Deep Metric Socket 1/2" Drive 24 mm44025M 12 Pt. Deep Metric Socket 1/2" Drive 25 mm

44026M 12 Pt. Deep Metric Socket 1/2" Drive 26 mm44027M 12 Pt. Deep Metric Socket 1/2" Drive 27 mm40416 6 Pt. Deep Inch Socket 1/2" Drive 1/2"40418 6 Pt. Deep Inch Socket 1/2" Drive 9/16"40420 6 Pt. Deep Inch Socket 1/2" Drive 5/8"40422 6 Pt. Deep Inch Socket 1/2" Drive 11/16"40424 6 Pt. Deep Inch Socket 1/2" Drive 3/4"40426 6 Pt. Deep Inch Socket 1/2" Drive 13/16"40428 6 Pt. Deep Inch Socket 1/2" Drive 7/8"40430 6 Pt. Deep Inch Socket 1/2" Drive 15/16"40432 6 Pt. Deep Inch Socket 1/2" Drive 1"40434 6 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40436 6 Pt. Deep Inch Socket 1/2" Drive 1-1/8"40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"40332 12 Pt. Deep Inch Socket 1/2" Drive 1"40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40336 12 Pt. Deep Inch Socket 1/2" Drive 1-1/8"40320S 1/2" Drive Spark Plug Socket 5/8"40326S 1/2" Drive Spark Plug Socket 13/16"49964 1/2" Drive Extension 2" 49945B 1/2" Drive Round Head Reversible RatchetUW-30 1/2" Drive Impact Extension 2-5/8" 49966 1/2" Drive Extension 5" 49990 1/2" Drive Extension 10" 49978 1/2" Drive Universal Joint49992 1/2" Drive Speeder Handle49988B 1/2" Drive Flex Handle Ratchet34965 1/2" Drive 1/2" x 3/8" Adapter69992 1/2" Drive 1/2" x 3/4" AdapterBW-1110M Satin Finish - Combination Wrench Metric 10 mmBW-1111M Satin Finish - Combination Wrench Metric 11 mmBW-1112M Satin Finish - Combination Wrench Metric 12 mmBW-1113M Satin Finish - Combination Wrench Metric 13 mmBW-1114M Satin Finish - Combination Wrench Metric 14 mmBW-1115M Satin Finish - Combination Wrench Metric 15 mmBW-1116M Satin Finish - Combination Wrench Metric 16 mmBW-1117M Satin Finish - Combination Wrench Metric 17 mmBW-1118M Satin Finish - Combination Wrench Metric 18 mmBW-1119M Satin Finish - Combination Wrench Metric 19 mmBW-1120M Satin Finish - Combination Wrench Metric 20 mmBW-1121M Satin Finish - Combination Wrench Metric 21 mmBW-1122M Satin Finish - Combination Wrench Metric 22 mmBW-1124M Satin Finish - Combination Wrench Metric 24 mmBW-1125M Satin Finish - Combination Wrench Metric 25 mmBW-1127M Satin Finish - Combination Wrench Metric 27 mmBW-1128M Satin Finish - Combination Wrench Metric 28 mmBW-1132M Satin Finish - Combination Wrench Metric 32 mmBW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1165 Satin Finish - Combination Wrench 11/16"





MA

ST

ER

SE

TS




BW-1166 Satin Finish - Combination Wrench 3/4"BW-1167A Satin Finish - Combination Wrench 13/16"BW-1167 Satin Finish - Combination Wrench 7/8"BW-1168 Satin Finish - Combination Wrench 15/16" BW-1170 Satin Finish - Combination Wrench 1"BW-1171 Satin Finish - Combination Wrench 1-1/16"BW-1172 Satin Finish - Combination Wrench 1-1/8"BW-1173 Satin Finish - Combination Wrench 1-1/4"4020P Full Polish - Open End Wrench Inch 1/4" X 5/16"4723P Full Polish - Open End Wrench Inch 3/8" X 7/16"4724P Full Polish - Open End Wrench Inch 7/16" X 1/2"4725P Full Polish - Open End Wrench Inch 1/2" X 9/16"4727P Full Polish - Open End Wrench Inch 5/8" X 11/16"4728P Full Polish - Open End Wrench Inch 11/16" X 3/4"4732P Full Polish - Open End Wrench Inch 13/16" X 7/8"4033P Full Polish - Open End Wrench Inch 15/16" X 1"AW-1004-1 Adjustable Wrench 4"AW-1006-1 Adjustable Wrench 6"AW-1008-1 Adjustable Wrench 8"AW-1010-1 Adjustable Wrench 10"AW-1012-1 Adjustable Wrench 12"FN-1402P Flare Nut Wrench - Inch 3/8" X 7/16"FN-1404P Flare Nut Wrench - Inch 1/2" X 9/16"FN-1406P Flare Nut Wrench - Inch 5/8" X 11/16"FN-1410P Flare Nut Wrench - Inch 3/4" X 1"FN-911MP Flare Nut Wrench - Metric 9 mm X 11 mmFN-1012MP Flare Nut Wrench - Metric 10 mm X 12 mmFN-1314MP Flare Nut Wrench - Metric 13 mm X 14 mmFN-1517MP Flare Nut Wrench - Metric 15 mm X 17 mmFN-1921MP Flare Nut Wrench - Metric 19 mm X 21 mmBWS-1202P Box End Wrench Long - Inch 5/16" X 3/8"BWS-1206P Box End Wrench Long - Inch 7/16" X 1/2"BWS-1211P Box End Wrench Long - Inch 9/16" X 5/8"BWS-1214P Box End Wrench Long - Inch 11/16" X 3/4"BWS-1216P Box End Wrench Long - Inch 13/16" X 7/8"BWS-1218P Box End Wrench Long - Inch 15/16" X 1"3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"

3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"CT-114 14 Pc. Chisel and Punch SetCT-1509 Aligning Punch 11" Length, 1/4" PointCT-1108 Long Cold Chisel 3/4" L 12"CT-1110 Long Cold Chisel 7/8" L 12"CT-1404 Hand Punch 3/8" L 5"CT-1554 Long Taper Punch 1/2" L 8-1/2"CT-1556 Long Taper Punch 1/2" L 9"CT-1558 Long Taper Punch 5/8" L 11"CT-1303 Center Punch 3/8" L5"CT-1306 Center Punch 1/2" L6"CT-1617 Pry Bar 1/2" L 15"CT-1606 Pinch Bar 1/2" L 14"CT-1254 Diamond Point Chisel 5" Length, 3/16" EdgeHW-9451 Phillips® Screwdriver Bit Socket No. 2HW-9450 Phillips® Screwdriver Bit Socket No. 1HW-9452 Phillips® Screwdriver Bit Socket No. 3HW-9506 3/8" Drive Slotted Screwdriver Bit Socket 5/16" Tip WidthHW-9505 3/8" Drive Screwdriver Bit Socket 1/4" Tip WidthHW-9504 3/8" Drive Screwdriver Bit Socket 3/16" Tip WidthZW-59 13 Pc Long Hex Key Wrench Set ZW-53 13 Pc Hex Key Wrench Set .050- 3/8"ZW-69 9 Pc Metric Hex Key Wrench SetPT-1251 5" Ignition PlierPT-1052-1 6" Diagonal Cutting Plier PT-1057-1 7" Heavy-Duty Diagonal Cutting PlierPT-1108-1 8" Linesman Plier PT-1128-1 6-1/2" Long Nose Sidecutting PlierPT-1149-1 6" Curved Needle Nose Plier PT-1002-1 6" Heavy Duty Slip JointPT-1050 8-1/2" Wire Stripper and Crimper PlierPT-3000 4 Pc Mini Long Reach Plier SetPT-1250-1 10 Rib Lock PlierPT-1259 7" Battery Plier



MA

ST

ER

SE

TS




PT-1263 8" Parrot Nose PlierPT-1266 7-3/4" Lock Ring PlierPT-1002-1 6" Heavy Duty Slip JointPT-1003-1 8" Heavy Duty Slip JointPT-1004-1 10" Heavy Duty Slip JointST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" TipST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1083S Phillips® Tip Screwdriver 6" Blade, No. 3 Pt.ST-1084S Phillips® Tip Screwdriver 8" Blade, No. 4 Pt.ST-1140S Stubby Phillips® Tip Screwdriver 1- 1/2" Blade, No. 2 Pt.ST-1145S Stubby Slotted Tip Screwdriver 1-1/4" Blade, 7/32" TipST-1150S Pocket-Size Slotted Tip Screwdriver With Clip 2" Blade, 1/8" TipST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1024S Square Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1026S Square Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1028S Square Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1032S Square Shank Slotted Tip Screwdriver 12" Blade, 3/8" TipST-608S Torx® Screwdriver T8ST-610S Torx® Screwdriver T10ST-615S Torx® Screwdriver T15ST-620S Torx® Screwdriver T20ST-625S Torx® Screwdriver T25ST-627S Torx® Screwdriver T27ST-630S Torx® Screwdriver T30ST-803 Nut Driver Inch 1/4"ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"

ST-818 Nut Driver Inch 1/2"ST-905M Nut Driver Metric 5 mmST-955M Nut Driver Metric 5.5 mmST-907M Nut Driver Metric 7 mmST-908M Nut Driver Metric 8 mmST-909M Nut Driver Metric 9 mmST-910M Nut Driver Metric 10 mm9000-A Adapter Socket900-20 Insert Bit # 0 Pt. Phillips®




900-0 Insert Bit Slotted 7/64"900-5 Insert Bit Slotted 7/32"900-1 Insert Bit Slotted 1/8"900-2 Insert Bit Slotted 9/64"900-8 Insert Bit Slotted 5/16"900-3 Insert Bit Slotted 5/32"900-4 Insert Bit Slotted 3/16"900-6 Insert Bit Slotted 1/4"9000-T7 Torx® Bit T79000-T8 Torx® Bit T89000-T10 Torx® Bit T109000-T15 Torx® Bit T159000-T20 Torx® Bit T209000-T25 Torx® Bit T259000-T27 Torx® Bit T279000-T30 Torx® Bit T30900-60 Hex Bit, 5/64"900-61 Hex Bit, 1/8"900-62 Hex Bit, 5/32900-63 Hex Bit, 3/16"900-64 Hex Bit, 1/4"DT-55 5 Pc Screw Extractor Set





MA

ST

ER

SE

TS



241 Sockets & Accessories12 Wrenches7 Screwdrivers40 Miscellaneous Tools



MA

ST

ER

SE

TS




GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-706M 12 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-707M 12 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-708M 12 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-709M 12 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-710M 12 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-711M 12 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-712M 12 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-713M 12 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-9550 1/4" Drive Accessory Spinner34960 1/4" Drive Accessory 1/4" X 3/8" Adapter

GW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9945B 1/4" Drive Round Head Reversible Ratchet31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16 "30632 6 Pt. Standard Inch Socket 3/8" Drive 1"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"300301 12 Pt. Standard Inch Socket 3/8" Drive 15/16"300321 12 Pt. Standard Inch Socket 3/8" Drive 1"32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm32020M 6 Pt. Standard Metric Socket 3/8" Drive 20 mm34007M 12 Pt. Standard Metric Socket 3/8" Drive 7 mm34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm34020M 12 Pt. Standard Metric Socket 3/8" Drive 20 mmHW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"





MA

ST

ER

SE

TS


HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"30432 12 Pt. Deep Inch Socket 3/8" Drive 1"HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mmHW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34993 3/8" Drive Universal Joint34963 3/8" Drive 3/8" x 1/4" Adapter34989 3/8" Drive Extension 1-3/4" 34984 1/2" Drive Extension 11" 34945B 3/8" Drive Round Head Reversible Ratchet40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"40632 6 Pt. Standard Inch Socket 1/2" Drive 1"40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm

43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm43023M 6 Pt. Standard Metric Socket 1/2" Drive 23 mm43024M 6 Pt. Standard Metric Socket 1/2" Drive 24 mm43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm42022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm42023M 12 Pt. Standard Metric Socket 1/2" Drive 23 mm42024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"40332 12 Pt. Deep Inch Socket 1/2" Drive 1"40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40336 12 Pt. Deep Inch Socket 1/2" Drive 1-1/8"44012M 12 Pt. Deep Metric Socket 1/2" Drive 12 mm44013M 12 Pt. Deep Metric Socket 1/2" Drive 13 mm44014M 12 Pt. Deep Metric Socket 1/2" Drive 14 mm44015M 12 Pt. Deep Metric Socket 1/2" Drive 15 mm44016M 12 Pt. Deep Metric Socket 1/2" Drive 16 mm44017M 12 Pt. Deep Metric Socket 1/2" Drive 17 mm44018M 12 Pt. Deep Metric Socket 1/2" Drive 18 mm44019M 12 Pt. Deep Metric Socket 1/2" Drive 19 mm44020M 12 Pt. Deep Metric Socket 1/2" Drive 20 mm44021M 12 Pt. Deep Metric Socket 1/2" Drive 21 mm44022M 12 Pt. Deep Metric Socket 1/2" Drive 22 mm40320S 1/2" Drive Spark Plug Socket 5/8"40326S 1/2" Drive Spark Plug Socket 13/16"49964 1/2" Drive Extension 2" 49978 1/2" Drive Universal Joint49966 1/2" Drive Extension 5" 49990 1/2" Drive Extension 10" 34965 1/2" Drive 1/2" x 3/8" Adapter49945B 1/2" Drive Round Head Reversible RatchetBW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1110M Satin Finish - Combination Wrench Metric 10 mmBW-1111M Satin Finish - Combination Wrench Metric 11 mmBW-1112M Satin Finish - Combination Wrench Metric 12 mmBW-1113M Satin Finish - Combination Wrench Metric 13 mmBW-1114M Satin Finish - Combination Wrench Metric 14 mm





MA

ST

ER

SE

TS




BW-1115M Satin Finish - Combination Wrench Metric 15 mmHW-9404M 3/8" Drive Hex Bit Socket Metric 4 mmHW-9405M 3/8" Drive Hex Bit Socket Metric 5 mmHW-9406M 3/8" Drive Hex Bit Socket Metric 6 mmHW-9407M 3/8" Drive Hex Bit Socket Metric 7 mmHW-9408M 3/8" Drive Hex Bit Socket Metric 8 mmHW-9410M 3/8" Drive Hex Bit Socket Metric 10 mmHW-9442 3/8" Drive Hex Bit Socket Inch 1/8"HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"ST-803 Nut Driver Inch 1/4"

ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"ST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" TipST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1083S Phillips® Tip Screwdriver 6" Blade, No. 3 Pt.ST-1084S Phillips® Tip Screwdriver 8" Blade, No. 4 Pt.ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"ZW-59 13 Pc. Long Hex Key Wrench Set ZW-69 9 Pc. Metric Hex Key Wrench Set





MA

ST

ER

SE

TS

GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1706 12 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1707 12 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1708 12 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1709 12 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1710 12 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1711 12 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1712 12 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1714 12 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1716 12 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4" GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9550 1/4" Drive Spinner30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"

30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"34988 3/8" Drive Extension 3" 34945B 3/8" Drive Round Head Reversible Ratchet40612 6 Pt. Standard Inch Socket 1/2" Drive 3/8"40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"40616 6 Pt. Standard Inch Socket 1/2" Drive 1/2"40618 6 Pt. Standard Inch Socket 1/2" Drive 9/16"40620 6 Pt. Standard Inch Socket 1/2" Drive 5/8"40622 6 Pt. Standard Inch Socket 1/2" Drive 11/16"40624 6 Pt. Standard Inch Socket 1/2" Drive 3/4"40626 6 Pt. Standard Inch Socket 1/2" Drive 13/16"40628 6 Pt. Standard Inch Socket 1/2" Drive 7/8"40630 6 Pt. Standard Inch Socket 1/2" Drive 15/16"40632 6 Pt. Standard Inch Socket 1/2" Drive 1"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"








MA

ST

ER

SE

TS




40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40416 6 Pt. Deep Inch Socket 1/2" Drive 1/2"40418 6 Pt. Deep Inch Socket 1/2" Drive 9/16"40420 6 Pt. Deep Inch Socket 1/2" Drive 5/8"40422 6 Pt. Deep Inch Socket 1/2" Drive 11/16"40424 6 Pt. Deep Inch Socket 1/2" Drive 3/4"40426 6 Pt. Deep Inch Socket 1/2" Drive 13/16"40428 6 Pt. Deep Inch Socket 1/2" Drive 7/8"40430 6 Pt. Deep Inch Socket 1/2" Drive 15/16"40432 6 Pt. Deep Inch Socket 1/2" Drive 1"49966 1/2" Drive Extension 5" 49945B 1/2" Drive Round Head Reversible RatchetBW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1165 Satin Finish - Combination Wrench 11/16"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1167A Satin Finish - Combination Wrench 13/16"BW-1167 Satin Finish - Combination Wrench 7/8"BW-1168 Satin Finish - Combination Wrench 15/16"BW-1170 Satin Finish - Combination Wrench 1"BW-1171 Satin Finish - Combination Wrench 1-1/16"BW-1172 Satin Finish - Combination Wrench 1-1/8"BW-1173 Satin Finish - Combination Wrench 1-1/4"4020P Full Polish - Open End Wrench Inch 1/4" X 5/16"4723P Full Polish - Open End Wrench Inch 3/8" X 7/16"4724P Full Polish - Open End Wrench Inch 7/16" X 1/2"4725P Full Polish - Open End Wrench Inch 1/2" X 9/16"4727P Full Polish - Open End Wrench Inch 5/8" X 11/16"4728P Full Polish - Open End Wrench Inch 11/16" X 3/4"4732P Full Polish - Open End Wrench Inch 13/16" X 7/8"4033P Full Polish - Open End Wrench Inch 15/16" X 1"BWE-67MP Full Polish - Open End Wrench Metric 6 mm X 7 mmBWE-89MP Full Polish - Open End Wrench Metric 8 mm X 9 mmBWE-1011MP Full Polish - Open End Wrench Metric 10 mm X 11 mmBWE-1213MP Full Polish - Open End Wrench Metric 12 mm X 13 mmBWE-1415MP Full Polish - Open End Wrench Metric 14 mm X 15 mmBWE-1617MP Full Polish - Open End Wrench Metric 16 mm X 17 mmBWE-1819MP Full Polish - Open End Wrench Metric 18 mm X 19 mmBWE-2022MP Full Polish - Open End Wrench Metric 20 mm X 22 mmFN-1402P Flare Nut Wrench - Inch 3/8" X 7/16"FN-1404P Flare Nut Wrench - Inch 1/2" X 9/16"FN-1406P Flare Nut Wrench - Inch 5/8" X 11/16"FN-1410P Flare Nut Wrench - Inch 3/4" X 1"BWS-1202P Box End Wrench Long - Inch 5/16" X 3/8"BWS-1206P Box End Wrench Long - Inch 7/16" X 1/2"BWS-1211P Box End Wrench Long - Inch 9/16" X 5/8"BWS-1214P Box End Wrench Long - Inch 11/16" X 3/4"BWS-1216P Box End Wrench Long - Inch 13/16" X 7/8"BWS-1218P Box End Wrench Long - Inch 15/16" X 1"AW-1004-1 Adjustable Wrench 4"AW-1006-1 Adjustable Wrench 6"AW-1008-1 Adjustable Wrench 8"

AW-1010-1 Adjustable Wrench 10"3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"3132 Ignition Open End Wrench 3/8"3134 Ignition Open End Wrench 7/16"CT-1464 Pin Punch 7" Length, 1/4" PointCT-1003 Cold Chisel 5-1/4" Length, 3/8" EdgeCT-1004 Cold Chisel 5-1/2" Length, 7/16" EdgeCT-1006 Cold Chisel 6-1/2" Length, 5/8" EdgeCT-1008 Cold Chisel 7" Length, 3/4" EdgeCT-1010 Cold Chisel 7-1/2" Length, 7/8" EdgeCT-1453 Pin Punch 5" Length, 1/8" PointCT-1454 Pin Punch 5-1/4" Length, 5/32" PointCT-1456 Pin Punch 5-1/2" Length, 3/16" PointCT-1509 Aligning Punch 11" Length, 1/4" PointCT-1303 Center Punch 5" Length, 5/32" PointCT-1306 Center Punch 6" Length, 1/4" PointHW-9442 3/8" Drive Hex Bit Socket Inch 1/8"HW-9444 3/8" Drive Hex Bit Socket Inch 5/32"HW-9448 3/8" Drive Hex Bit Socket Inch 7/32"HW-9447 3/8" Drive Hex Bit Socket Inch 1/4"HW-9446 3/8" Drive Hex Bit Socket Inch 5/16"HW-9445 3/8" Drive Hex Bit Socket Inch 3/8"ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"ZW-59 13 Pc. Long Hex Key Wrench Set ZW-69 9 Pc. Metric Hex Key Wrench SetPT-1052-1 6" Diagonal Cutting Plier PT-1057-1 7" Heavy-Duty Diagonal Cutting PlierPT-1108-1 8" Linesman Plier PT-1128-1 6-1/2" Long Nose Sidecutting PlierPT-1149-1 6" Curved Needle Nose PlierPT-1002-1 6" Heavy Duty Slip JointPT-1050 8-1/2" Wire Stripper and Crimper Plier940-JS 40 Pc. Insert Bit SetST-1043S Electrician's Slotted Tip Screwdriver 3" Blade, 3/16" TipST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-106S 5 Pc. Slotted Screwdriver SetST-105S 5 Pc. Phillips® Screwdriver SetST-127S 7 Pc. Torx® Screwdriver SetST-803 Nut Driver Inch 1/4"ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"84-597 18 Pc. Retaining Ring Plier Set





MA

ST

ER

SE

TS

GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mmGW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-9945B 1/4" Drive Round Head Reversible Ratchet

GW-9550 1/4" Drive Spinner34960 1/4" Drive 1/4" X 3/8" AdapterGW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" 31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"31116 8 Pt. Standard Inch Socket 3/8" Drive 1/2"30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"30630 6 Pt. Standard Inch Socket 3/8" Drive 15/16"30632 6 Pt. Standard Inch Socket 3/8" Drive 1"32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm30010A 12 Pt. Standard Inch Socket 3/8" Drive 5/16"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"


160 Sockets and Accessories20 Wrenches40 Miscellaneous Tools





MA

ST

ER

SE

TS




30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"34007M 12 Pt. Standard Metric Socket 3/8" Drive 7 mm34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"30428 12 Pt. Deep Inch Socket 3/8" Drive 7/8"30430 12 Pt. Deep Inch Socket 3/8" Drive 15/16"30432 12 Pt. Deep Inch Socket 3/8" Drive 1"HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1518M 6 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mmHW-1520S 3/8" Drive Spark Plug Socket 5/8"34945B 3/8" Drive Round Head Reversible Ratchet34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34963 3/8" Drive 3/8" x 1/4" Adapter34966 3/8" Drive 3/8" x 1/2" Adapter43010M 12 Pt. Standard Metric Socket 1/2" Drive 10 mm43011M 12 Pt. Standard Metric Socket 1/2" Drive 11 mm43012M 12 Pt. Standard Metric Socket 1/2" Drive 12 mm43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm42017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm42019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm42020M 12 Pt. Standard Metric Socket 1/2" Drive 20 mm42021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"

40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"42010M 6 Pt. Standard Metric Socket 1/2" Drive 10 mm42011M 6 Pt. Standard Metric Socket 1/2" Drive 11 mm42012M 6 Pt. Standard Metric Socket 1/2" Drive 12 mm42013M 6 Pt. Standard Metric Socket 1/2" Drive 13 mm42014M 6 Pt. Standard Metric Socket 1/2" Drive 14 mm43015M 6 Pt. Standard Metric Socket 1/2" Drive 15 mm43017M 6 Pt. Standard Metric Socket 1/2" Drive 17 mm43019M 6 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 6 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 6 Pt. Standard Metric Socket 1/2" Drive 22 mm40320S 1/2" Drive Spark Plug Socket 5/8"40326S 1/2" Drive Spark Plug Socket 13/16"49964 1/2" Drive Extension 2" 49945B 1/2" Drive Round Head Reversible RatchetBW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1110M Satin Finish - Combination Wrench Metric 10 mmBW-1111M Satin Finish - Combination Wrench Metric 11 mmBW-1112M Satin Finish - Combination Wrench Metric 12 mmBW-1113M Satin Finish - Combination Wrench Metric 13 mmBW-1114M Satin Finish - Combination Wrench Metric 14 mmBW-1115M Satin Finish - Combination Wrench Metric 15 mm3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"HW-9442 Hex Bit Socket Inch 1/8"HW-9444 Hex Bit Socket Inch 5/32"HW-9445 Hex Bit Socket Inch 3/8"HW-9446 Hex Bit Socket Inch 5/16"HW-9447 Hex Bit Socket Inch 1/4"HW-9448 Hex Bit Socket Inch 7/32"HW-9449 Hex Bit Socket Inch 3/16" ST-803 Nut Driver Inch 1/4"ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"ZW-59 13 Pc. Long Hex Key Wrench Set ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"ZW-69 9 Pc. Metric Hex Key Wrench Set





MA

ST

ER

SE

TS

GW-1605 6 Pt. Standard Inch Socket 1/4" Drive 5/32"GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-604M 6 Pt. Standard Metric Socket 1/4" Drive 4 mmGW-645M 6 Pt. Standard Metric Socket 1/4" Drive 4.5 mmGW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mmGW-655M 6 Pt. Standard Metric Socket 1/4" Drive 5.5 mmGW-606M 6 Pt. Standard Metric Socket 1/4" Drive 6 mmGW-607M 6 Pt. Standard Metric Socket 1/4" Drive 7 mmGW-608M 6 Pt. Standard Metric Socket 1/4" Drive 8 mmGW-609M 6 Pt. Standard Metric Socket 1/4" Drive 9 mmGW-610M 6 Pt. Standard Metric Socket 1/4" Drive 10 mmGW-611M 6 Pt. Standard Metric Socket 1/4" Drive 11 mmGW-612M 6 Pt. Standard Metric Socket 1/4" Drive 12 mmGW-613M 6 Pt. Standard Metric Socket 1/4" Drive 13 mmGW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"GW-504M 6 Pt. Deep Metric Socket 1/4" Drive 7/16"GW-505M 6 Pt. Deep Metric Socket 1/4" Drive 5 mmGW-506M 6 Pt. Deep Metric Socket 1/4" Drive 6 mmGW-507M 6 Pt. Deep Metric Socket 1/4" Drive 7 mmGW-508M 6 Pt. Deep Metric Socket 1/4" Drive 8 mmGW-509M 6 Pt. Deep Metric Socket 1/4" Drive 9 mmGW-510M 6 Pt. Deep Metric Socket 1/4" Drive 10 mm

GW-511M 6 Pt. Deep Metric Socket 1/4" Drive 11 mmGW-512M 6 Pt. Deep Metric Socket 1/4" Drive 12 mmGW-513M 6 Pt. Deep Metric Socket 1/4" Drive 13 mmGW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9945B 1/4" Drive Round Head Reversible RatchetGW-9550 1/4" Drive Spinner31110 8 Pt. Standard Inch Socket 3/8" Drive 5/16"31112 8 Pt. Standard Inch Socket 3/8" Drive 3/8"31114 8 Pt. Standard Inch Socket 3/8" Drive 7/16"30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"32008M 6 Pt. Standard Metric Socket 3/8" Drive 8 mm32009M 6 Pt. Standard Metric Socket 3/8" Drive 9 mm32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm32011M 6 Pt. Standard Metric Socket 3/8" Drive 11 mm32012M 6 Pt. Standard Metric Socket 3/8" Drive 12 mm32013M 6 Pt. Standard Metric Socket 3/8" Drive 13 mm32014M 6 Pt. Standard Metric Socket 3/8" Drive 14 mm32015M 6 Pt. Standard Metric Socket 3/8" Drive 15 mm32016M 6 Pt. Standard Metric Socket 3/8" Drive 16 mm32017M 6 Pt. Standard Metric Socket 3/8" Drive 17 mm32018M 6 Pt. Standard Metric Socket 3/8" Drive 18 mm32019M 6 Pt. Standard Metric Socket 3/8" Drive 19 mm300301 12 Pt. Standard Inch Socket 3/8" Drive 15/16"30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"30014 12 Pt. Standard Inch Socket 3/8" Drive 7/16"30016 12 Pt. Standard Inch Socket 3/8" Drive 1/2"30018 12 Pt. Standard Inch Socket 3/8" Drive 9/16"30020 12 Pt. Standard Inch Socket 3/8" Drive 5/8"



150 Sockets and Accessories30 Wrenches25 Miscellaneous Tools





MA

ST

ER

SE

TS




30022 12 Pt. Standard Inch Socket 3/8" Drive 11/16"30024 12 Pt. Standard Inch Socket 3/8" Drive 3/4"30026 12 Pt. Standard Inch Socket 3/8" Drive 13/16"30028 12 Pt. Standard Inch Socket 3/8" Drive 7/8"34008M 12 Pt. Standard Metric Socket 3/8" Drive 8 mm34009M 12 Pt. Standard Metric Socket 3/8" Drive 9 mm34010M 12 Pt. Standard Metric Socket 3/8" Drive 10 mm34011M 12 Pt. Standard Metric Socket 3/8" Drive 11 mm34012M 12 Pt. Standard Metric Socket 3/8" Drive 12 mm34013M 12 Pt. Standard Metric Socket 3/8" Drive 13 mm34014M 12 Pt. Standard Metric Socket 3/8" Drive 14 mm34015M 12 Pt. Standard Metric Socket 3/8" Drive 15 mm34016M 12 Pt. Standard Metric Socket 3/8" Drive 16 mm34017M 12 Pt. Standard Metric Socket 3/8" Drive 17 mm34018M 12 Pt. Standard Metric Socket 3/8" Drive 18 mm34019M 12 Pt. Standard Metric Socket 3/8" Drive 19 mm30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"30414 12 Pt. Deep Inch Socket 3/8" Drive 7/16"30416 12 Pt. Deep Inch Socket 3/8" Drive 1/2"30418 12 Pt. Deep Inch Socket 3/8" Drive 9/16"30420 12 Pt. Deep Inch Socket 3/8" Drive 5/8"30422 12 Pt. Deep Inch Socket 3/8" Drive 11/16"30424 12 Pt. Deep Inch Socket 3/8" Drive 3/4"30426 12 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mmHW-1511M 6 Pt. Deep Metric Socket 3/8" Drive 11 mmHW-1512M 6 Pt. Deep Metric Socket 3/8" Drive 12 mmHW-1513M 6 Pt. Deep Metric Socket 3/8" Drive 13 mmHW-1514M 6 Pt. Deep Metric Socket 3/8" Drive 14 mmHW-1515M 6 Pt. Deep Metric Socket 3/8" Drive 15 mmHW-1517M 6 Pt. Deep Metric Socket 3/8" Drive 17 mmHW-1518M 6 Pt. Deep Metric Socket 3/8" Drive 18 mmHW-1519M 6 Pt. Deep Metric Socket 3/8" Drive 19 mm34945B 3/8" Drive Round Head Reversible Ratchet34993 3/8" Drive Universal Joint34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" HW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40136 12 Pt. Standard Inch Socket 1/2" Drive 1-1/8"40140 12 Pt. Standard Inch Socket 1/2" Drive 1-1/4"

43013M 12 Pt. Standard Metric Socket 1/2" Drive 13 mm43014M 12 Pt. Standard Metric Socket 1/2" Drive 14 mm42015M 12 Pt. Standard Metric Socket 1/2" Drive 15 mm42016M 12 Pt. Standard Metric Socket 1/2" Drive 16 mm43017M 12 Pt. Standard Metric Socket 1/2" Drive 17 mm42018M 12 Pt. Standard Metric Socket 1/2" Drive 18 mm43019M 12 Pt. Standard Metric Socket 1/2" Drive 19 mm43021M 12 Pt. Standard Metric Socket 1/2" Drive 21 mm43022M 12 Pt. Standard Metric Socket 1/2" Drive 22 mm43024M 12 Pt. Standard Metric Socket 1/2" Drive 24 mm43027M 12 Pt. Standard Metric Socket 1/2" Drive 27 mm42030M 12 Pt. Standard Metric Socket 1/2" Drive 30 mm42032M 12 Pt. Standard Metric Socket 1/2" Drive 32 mm40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"49945B 1/2" Drive Round Head Reversible Ratchet49966 1/2" Drive Extension 5" 49978 1/2" Drive Universal JointBW-1156 Satin Finish - Combination Wrench 1/4"BW-1159 Satin Finish - Combination Wrench 5/16"BW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1107MFP Satin Finish - Combination Wrench Metric 7 mmBW-1108MFP Satin Finish - Combination Wrench Metric 8 mmBW-1109MFP Satin Finish - Combination Wrench Metric 9 mmBW-1110MFP Satin Finish - Combination Wrench Metric 10 mmBW-1111MFP Satin Finish - Combination Wrench Metric 11 mmBW-1112MFP Satin Finish - Combination Wrench Metric 12 mmZW-53 13 Pc Hex Key Wrench Set .050- 3/8"ZW-69 9 Pc Metric Hex Key Wrench SetST-803 Nut Driver Inch 1/4"ST-806 Nut Driver Inch 5/16"ST-809 Nut Driver Inch 11/32"ST-812 Nut Driver Inch 3/8"ST-815 Nut Driver Inch 7/16"ST-610S Torx® Screwdriver T10ST-615S Torx® Screwdriver T15ST-620S Torx® Screwdriver T20ST-625S Torx® Screwdriver T25ST-630S Torx® Screwdriver T30ST-105S 5 Pc Phillips® Screwdriver SetST-106S 6 Pc Slotted Screwdriver SetPT-1052-1 6" Diagonal Cutting Plier PT-1002-1 6" Heavy Duty Slip Joint





MA

ST

ER

SE

TS


83 Sockets & Accessories 28 Wrenches81 Miscellaneous Tools




MA

ST

ER

SE

TS




34960 1/4" Drive 1/4" X 3/8" AdapterGW-9898 1/4" Drive Extension 3" GW-9550 1/4" Drive SpinnerGW-9899 1/4" Drive Extension 6" GW-9749B 1/4" Drive Flex Handle RatchetGW-9945B 1/4" Drive Round Head Reversible RatchetGW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"GW-1506 6 Pt. Deep Inch Socket 1/4" Drive 3/16"GW-1507 6 Pt. Deep Inch Socket 1/4" Drive 7/32"GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"GW-1509 6 Pt. Deep Inch Socket 1/4" Drive 9/32"GW-1510 6 Pt. Deep Inch Socket 1/4" Drive 5/16"GW-1511 6 Pt. Deep Inch Socket 1/4" Drive 11/32"GW-1512 6 Pt. Deep Inch Socket 1/4" Drive 3/8"GW-1514 6 Pt. Deep Inch Socket 1/4" Drive 7/16"GW-1516 6 Pt. Deep Inch Socket 1/4" Drive 1/2"34986B 3/8" Drive Flex Handle Ratchet34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 34984 3/8" Drive Extension 11" 34989 3/8" Drive Extension 1-3/4" 34993 3/8" Drive Universal Joint34945B 3/8" Drive Round Head Reversible Ratchet34963 3/8" Drive 3/8" x 1/4" Adapter34966 3/8" Drive 3/8" x 1/2" Adapter30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"HW-1514 6 Pt. Deep Inch Socket 3/8" Drive 7/16"HW-1516 6 Pt. Deep Inch Socket 3/8" Drive 1/2"HW-1518 6 Pt. Deep Inch Socket 3/8" Drive 9/16"HW-1520 6 Pt. Deep Inch Socket 3/8" Drive 5/8"HW-1522 6 Pt. Deep Inch Socket 3/8" Drive 11/16"HW-1524 6 Pt. Deep Inch Socket 3/8" Drive 3/4"HW-1526 6 Pt. Deep Inch Socket 3/8" Drive 13/16"HW-1528 6 Pt. Deep Inch Socket 3/8" Drive 7/8"HW-1520S 3/8" Drive Spark Plug Socket 5/8"HW-1526S 3/8" Drive Spark Plug Socket 13/16"49945B 1/2" Drive Round Head Reversible Ratchet49964 1/2" Drive Extension 2" 49966 1/2" Drive Extension 5" 49990 1/2" Drive Extension 10" 49978 1/2" Drive Universal Joint49988B 1/2" Drive Flex Handle Ratchet34965 1/2" Drive 1/2" x 3/8" Adapter40112 12 Pt. Standard Inch Socket 1/2" Drive 3/8"40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"40116 12 Pt. Standard Inch Socket 1/2" Drive 1/2"40118 12 Pt. Standard Inch Socket 1/2" Drive 9/16"40120 12 Pt. Standard Inch Socket 1/2" Drive 5/8"40122 12 Pt. Standard Inch Socket 1/2" Drive 11/16"40124 12 Pt. Standard Inch Socket 1/2" Drive 3/4"40126 12 Pt. Standard Inch Socket 1/2" Drive 13/16"40128 12 Pt. Standard Inch Socket 1/2" Drive 7/8"

40130 12 Pt. Standard Inch Socket 1/2" Drive 15/16"40132 12 Pt. Standard Inch Socket 1/2" Drive 1"40134 12 Pt. Standard Inch Socket 1/2" Drive 1-1/16"40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"40318 12 Pt. Deep Inch Socket 1/2" Drive 9/16"40320 12 Pt. Deep Inch Socket 1/2" Drive 5/8"40322 12 Pt. Deep Inch Socket 1/2" Drive 11/16"40324 12 Pt. Deep Inch Socket 1/2" Drive 3/4"40326 12 Pt. Deep Inch Socket 1/2" Drive 13/16"40328 12 Pt. Deep Inch Socket 1/2" Drive 7/8"40330 12 Pt. Deep Inch Socket 1/2" Drive 15/16"40332 12 Pt. Deep Inch Socket 1/2" Drive 1"40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"40336 12 Pt. Deep Inch Socket 1/2" Drive 1-1/8"BW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"BW-1165 Satin Finish - Combination Wrench 11/16"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1167A Satin Finish - Combination Wrench 13/16"BW-1167 Satin Finish - Combination Wrench 7/8"BW-1168 Satin Finish - Combination Wrench 15/16"BW-1170 Satin Finish - Combination Wrench 1"BWS-1202P Box End Wrench Long - Inch 5/16" X 3/8"BWS-1206P Box End Wrench Long - Inch 7/16" X 1/2"BWS-1211P Box End Wrench Long - Inch 9/16" X 5/8"BWS-1214P Box End Wrench Long - Inch 11/16" X 3/4"BWS-1216P Box End Wrench Long - Inch 13/16" X 7/8"BWS-1218P Box End Wrench Long - Inch 15/16" X 1"AW-1004-1 Adjustable Wrench 4"AW-1008-1 Adjustable Wrench 8"AW-1012-1 Adjustable Wrench 12"3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"CT-114 14 Pc. Punch and Chisel SetCT-1610 Pinch Bars 16"CT-1617 Pry Bars 15"CT-1303 Center Punch 5" Length, 5/32" PointCT-1509 Aligning Punch 11" Length, 1/4" PointST-1046S Electrician's Slotted Tip Screwdriver 6" Blade, 3/16" TipST-1048S Electrician's Slotted Tip Screwdriver 8" Blade, 3/16" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1008S Round Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1140S Stubby Phillips® Tip Screwdriver 1-1/2" Blade, No. 2 Pt.ST-1145S Stubby Slotted Tip Screwdriver 1-1/2" Blade, 1/4" Tip ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"PT-1251 5" Ignition PlierPT-1002-1 6" Heavy Duty Slip JointPT-1263 8" Parrot Nose PlierPT-1285 Combination Internal/External Retaining PlierPT-1003-1 8" Heavy Duty Slip JointHT-1005-1 Ball Pein Hammer 16oz84-597 18 Pc. Retaining Ring Plier SetDT-55 Screw Extractor SetFT-1202 Adjustable Hacksaw FrameFT-1124 10 Pc. Hacksaw Blades33-212 Tape Measure 12'





MA

ST

ER

SE

TS

GW-9550 1/4" Drive SpinnerGW-9898 1/4" Drive Extension 3" GW-9899 1/4" Drive Extension 6" GW-9945B 1/4" Drive Round Head Reversible RatchetGW-1605 1/4" Drive 6 Pt. Standard Inch Socket 5/32"GW-1606 1/4" Drive 6 Pt. Standard Inch Socket 3/16"GW-1607 1/4" Drive 6 Pt. Standard Inch Socket 7/32"GW-1608 1/4" Drive 6 Pt. Standard Inch Socket 1/4"GW-1609 1/4" Drive 6 Pt. Standard Inch Socket 9/32"GW-1610 1/4" Drive 6 Pt. Standard Inch Socket 5/16"GW-1611 1/4" Drive 6 Pt. Standard Inch Socket 11/32"GW-1612 1/4" Drive 6 Pt. Standard Inch Socket 3/8"GW-1614 1/4" Drive 6 Pt. Standard Inch Socket 7/16"GW-1616 1/4" Drive 6 Pt. Standard Inch Socket 1/2"GW-1706 1/4" Drive 12 Pt. Standard Inch Socket 3/16"GW-1707 1/4" Drive 12 Pt. Standard Inch Socket 7/32"GW-1708 1/4" Drive 12 Pt. Standard Inch Socket 1/4"GW-1709 1/4" Drive 12 Pt. Standard Inch Socket 9/32"GW-1710 1/4" Drive 12 Pt. Standard Inch Socket 5/16"GW-1711 1/4" Drive 12 Pt. Standard Inch Socket 11/32"GW-1712 1/4" Drive 12 Pt. Standard Inch Socket 3/8"GW-1714 1/4" Drive 12 Pt. Standard Inch Socket 7/16"GW-1716 1/4" Drive 12 Pt. Standard Inch Socket 1/2"GW-1508 1/4" Drive 6 Pt. Deep Inch Socket 1/4"GW-1510 1/4" Drive 6 Pt. Deep Inch Socket 5/16"GW-1511 1/4" Drive 6 Pt. Deep Inch Socket 11/32"GW-1512 1/4" Drive 6 Pt. Deep Inch Socket 3/8"GW-1514 1/4" Drive 6 Pt. Deep Inch Socket 7/16"GW-1516 1/4" Drive 6 Pt. Deep Inch Socket 1/2"GW-507M 1/4" Drive 6 Pt. Deep Metric Socket 7 mmGW-508M 1/4" Drive 6 Pt. Deep Metric Socket 8 mmGW-509M 1/4" Drive 6 Pt. Deep Metric Socket 9 mmGW-510M 1/4" Drive 6 Pt. Deep Metric Socket 10 mmGW-511M 1/4" Drive 6 Pt. Deep Metric Socket 11 mmGW-512M 1/4" Drive 6 Pt. Deep Metric Socket 12 mmGW-513M 1/4" Drive 6 Pt. Deep Metric Socket 13 mmGW-604M 1/4" Drive 6 Pt. Standard Metric Socket 4 mmGW-605M 1/4" Drive 6 Pt. Standard Metric Socket 5 mm

GW-606M 1/4" Drive 6 Pt. Standard Metric Socket 6 mmGW-607M 1/4" Drive 6 Pt. Standard Metric Socket 7 mmGW-608M 1/4" Drive 6 Pt. Standard Metric Socket 8 mmGW-609M 1/4" Drive 6 Pt. Standard Metric Socket 9 mmGW-610M 1/4" Drive 6 Pt. Standard Metric Socket 10 mmGW-611M 1/4" Drive 6 Pt. Standard Metric Socket 11 mmGW-612M 1/4" Drive 6 Pt. Standard Metric Socket 12 mmGW-613M 1/4" Drive 6 Pt. Standard Metric Socket 13 mm34963 3/8" Drive 3/8" x 1/4" Adapter34987 3/8" Drive Extension 6" 34988 3/8" Drive Extension 3" 34945B 3/8" Drive Round Head Reversible Ratchet34986B 3/8" Drive Flex Handle RatchetHW-1520S 3/8" Drive Spark Plug Socket 5/8"30612 3/8" Drive 6 Pt. Standard Inch Socket 3/8"30614 3/8" Drive 6 Pt. Standard Inch Socket 7/16"30616 3/8" Drive 6 Pt. Standard Inch Socket 1/2"30618 3/8" Drive 6 Pt. Standard Inch Socket 9/16"30620 3/8" Drive 6 Pt. Standard Inch Socket 5/8"30622 3/8" Drive 6 Pt. Standard Inch Socket 11/16"30624 3/8" Drive 6 Pt. Standard Inch Socket 3/4"30626 3/8" Drive 6 Pt. Standard Inch Socket 13/16"32009M 3/8" Drive 6 Pt. Standard Metric Socket 9 mm32010M 3/8" Drive 6 Pt. Standard Metric Socket 10 mm32011M 3/8" Drive 6 Pt. Standard Metric Socket 11 mm32012M 3/8" Drive 6 Pt. Standard Metric Socket 12 mm32013M 3/8" Drive 6 Pt. Standard Metric Socket 13 mm32014M 3/8" Drive 6 Pt. Standard Metric Socket 14 mm32015M 3/8" Drive 6 Pt. Standard Metric Socket 15 mm32017M 3/8" Drive 6 Pt. Standard Metric Socket 17 mm32019M 3/8" Drive 6 Pt. Standard Metric Socket 19 mm30012 3/8" Drive 12 Pt. Standard Inch Socket 3/8"30014 3/8" Drive 12 Pt. Standard Inch Socket 7/16"30016 3/8" Drive 12 Pt. Standard Inch Socket 1/2"30018 3/8" Drive 12 Pt. Standard Inch Socket 9/16"30020 3/8" Drive 12 Pt. Standard Inch Socket 5/8"30022 3/8" Drive 12 Pt. Standard Inch Socket 11/16"30024 3/8" Drive 12 Pt. Standard Inch Socket 3/4"




133 Sockets & Accessories21 Wrenches18 Miscellaneous Tools




MA

ST

ER

SE

TS




30026 3/8" Drive 12 Pt. Standard Inch Socket 13/16"34009M 3/8" Drive 12 Pt. Standard Metric Socket 9 mm34010M 3/8" Drive 12 Pt. Standard Metric Socket 10 mm34011M 3/8" Drive 12 Pt. Standard Metric Socket 11 mm34012M 3/8" Drive 12 Pt. Standard Metric Socket 12 mm34013M 3/8" Drive 12 Pt. Standard Metric Socket 13 mm34014M 3/8" Drive 12 Pt. Standard Metric Socket 14 mm34015M 3/8" Drive 12 Pt. Standard Metric Socket 15 mm34016M 3/8" Drive 12 Pt. Standard Metric Socket 16 mm34017M 3/8" Drive 12 Pt. Standard Metric Socket 17 mm34018M 3/8" Drive 12 Pt. Standard Metric Socket 18 mm34019M 3/8" Drive 12 Pt. Standard Metric Socket 19 mmHW-1512 3/8" Drive 6 Pt. Deep Inch Socket 3/8"HW-1514 3/8" Drive 6 Pt. Deep Inch Socket 7/16"HW-1516 3/8" Drive 6 Pt. Deep Inch Socket 1/2"HW-1518 3/8" Drive 6 Pt. Deep Inch Socket 9/16"HW-1520 3/8" Drive 6 Pt. Deep Inch Socket 5/8"HW-1522 3/8" Drive 6 Pt. Deep Inch Socket 11/16"HW-1524 3/8" Drive 6 Pt. Deep Inch Socket 3/4"HW-1526 3/8" Drive 6 Pt. Deep Inch Socket 13/16"HW-1510M 3/8" Drive 6 Pt. Deep Metric Socket 10 mmHW-1511M 3/8" Drive 6 Pt. Deep Metric Socket 11 mmHW-1512M 3/8" Drive 6 Pt. Deep Metric Socket 12 mmHW-1513M 3/8" Drive 6 Pt. Deep Metric Socket 13 mmHW-1514M 3/8" Drive 6 Pt. Deep Metric Socket 14 mmHW-1515M 3/8" Drive 6 Pt. Deep Metric Socket 15 mmHW-1517M 3/8" Drive 6 Pt. Deep Metric Socket 17 mmHW-1518M 3/8" Drive 6 Pt. Deep Metric Socket 18 mmHW-1519M 3/8" Drive 6 Pt. Deep Metric Socket 19 mm31110 3/8" Drive 8 Pt. Standard Inch Socket 5/16"31112 3/8" Drive 8 Pt. Standard Inch Socket 3/8"31114 3/8" Drive 8 Pt. Standard Inch Socket 7/16"49966 1/2" Drive Extension 5" 49945B 1/2" Drive Ratchet Round Head Knurled Non-Q.R.40326S 1/2" Drive Spark Plug Socket 13/16"40114 1/2" Drive 12 Pt. Standard Inch Socket 7/16"40116 1/2" Drive 12 Pt. Standard Inch Socket 1/2"40118 1/2" Drive 12 Pt. Standard Inch Socket 9/16"40120 1/2" Drive 12 Pt. Standard Inch Socket 5/8"40122 1/2" Drive 12 Pt. Standard Inch Socket 11/16"

40124 1/2" Drive 12 Pt. Standard Inch Socket 3/4"40126 1/2" Drive 12 Pt. Standard Inch Socket 13/16"40128 1/2" Drive 12 Pt. Standard Inch Socket 7/8"40130 1/2" Drive 12 Pt. Standard Inch Socket 15/16"43010M 1/2" Drive 12 Pt. Standard Metric Socket 10 mm43012M 1/2" Drive 12 Pt. Standard Metric Socket 12 mm43013M 1/2" Drive 12 Pt. Standard Metric Socket 13 mm43014M 1/2" Drive 12 Pt. Standard Metric Socket 14 mm42015M 1/2" Drive 12 Pt. Standard Metric Socket 15 mm42016M 1/2" Drive 12 Pt. Standard Metric Socket 16 mm42017M 1/2" Drive 12 Pt. Standard Metric Socket 17 mm42018M 1/2" Drive 12 Pt. Standard Metric Socket 18 mm42019M 1/2" Drive 12 Pt. Standard Metric Socket 19 mm42021M 1/2" Drive 12 Pt. Standard Metric Socket 21 mm42022M 1/2" Drive 12 Pt. Standard Metric Socket 22 mm42024M 1/2" Drive 12 Pt. Standard Metric Socket 24 mm42025M 1/2" Drive 12 Pt. Standard Metric Socket 25 mmBW-1160 Combination Wrench - Satin Finish 3/8"BW-1162 Combination Wrench - Satin Finish 1/2"BW-1161 Combination Wrench - Satin Finish 7/16"BW-1163 Combination Wrench - Satin Finish 9/16"BW-1164 Combination Wrench - Satin Finish 5/8"BW-1166 Combination Wrench - Satin Finish 3/4"BW-1109M Combination Wrench Metric- Satin Finish 9 mmBW-1110M Combination Wrench Metric- Satin Finish 10 mmBW-1111M Combination Wrench Metric- Satin Finish 11 mmBW-1112M Combination Wrench Metric- Satin Finish 12 mmBW-1114M Combination Wrench Metric- Satin Finish 14 mmBW-1117M Combination Wrench Metric- Satin Finish 17 mmBW-1119M Combination Wrench Metric- Satin Finish 19 mm3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"ST-106S 5 Pc. Phillips® Screwdriver Set





MA

ST

ER

SE

TS


GW-9945B 1/4" Drive Round Head Reversible RatchetGW-9550 1/4" Drive SpinnerGW-9898 1/4" Drive Extension 3" GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"GW-1607 6 Pt. Standard Inch Socket 1/4" Drive 7/32"GW-1608 6 Pt. Standard Inch Socket 1/4" Drive 1/4"GW-1609 6 Pt. Standard Inch Socket 1/4" Drive 9/32"GW-1610 6 Pt. Standard Inch Socket 1/4" Drive 5/16"GW-1611 6 Pt. Standard Inch Socket 1/4" Drive 11/32"GW-1612 6 Pt. Standard Inch Socket 1/4" Drive 3/8"GW-1614 6 Pt. Standard Inch Socket 1/4" Drive 7/16"GW-1616 6 Pt. Standard Inch Socket 1/4" Drive 1/2"34986B 3/8" Drive Flex Handle34945B 3/8" Drive Round Head Reversible Ratchet34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"30614 6 Pt. Standard Inch Socket 3/8" Drive 7/16"30616 6 Pt. Standard Inch Socket 3/8" Drive 1/2"30618 6 Pt. Standard Inch Socket 3/8" Drive 9/16"30620 6 Pt. Standard Inch Socket 3/8" Drive 5/8"30622 6 Pt. Standard Inch Socket 3/8" Drive 11/16"30624 6 Pt. Standard Inch Socket 3/8" Drive 3/4"30626 6 Pt. Standard Inch Socket 3/8" Drive 13/16"30628 6 Pt. Standard Inch Socket 3/8" Drive 7/8"HW-1520S 3/8" Drive Spark Plug Socket 5/8"BW-1160 Satin Finish - Combination Wrench 3/8"BW-1161 Satin Finish - Combination Wrench 7/16"BW-1162 Satin Finish - Combination Wrench 1/2"BW-1163 Satin Finish - Combination Wrench 9/16"BW-1164 Satin Finish - Combination Wrench 5/8"

BW-1165 Satin Finish - Combination Wrench 11/16"BW-1166 Satin Finish - Combination Wrench 3/4"BW-1167A Satin Finish - Combination Wrench 13/16"BW-1167 Satin Finish - Combination Wrench 7/8"BW-1168 Satin Finish - Combination Wrench 15/16"BW-1170 Satin Finish - Combination Wrench 1"3114 Ignition Open End Wrench 13/64"3116 Ignition Open End Wrench 7/32"3118 Ignition Open End Wrench 15/64"3120 Ignition Open End Wrench 1/4"3122 Ignition Open End Wrench 17/64"3124 Ignition Open End Wrench 9/32"3128 Ignition Open End Wrench 5/16"3130 Ignition Open End Wrench 11/32"CT-1003 Cold Chisel 5 1/4" Length, 3/8" EdgeCT-1004 Cold Chisel 5 1/2" Length, 7/16" EdgeCT-1456 Pin Punch 5 1/2" Length, 3/16" PointCT-1454 Pin Punch 5 1/4" Length, 5/32" PointST-1004S Round Shank Slotted Tip Screwdriver 4" Blade, 1/4" TipST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1028S Square Shank Slotted Tip Screwdriver 8" Blade, 3/8" TipST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ZW-53 13 Pc. Hex Key Wrench Set .050- 3/8"PT-1057-1 7" Heavy-Duty Diagonal Cutting PlierPT-1251 5" Ignition PlierPT-1003-1 8" Heavy Duty Slip JointPT-1002-1 6" Heavy Duty Slip JointFT-1202 HacksawFT-1124 10 Pc. Hacksaw BladesHT-1005-1 Ball Pein Hammer 16oz


26 Sockets & Accessories19 Wrenches4 Screwdrivers4 Pliers4 Punches and Chisels25 Miscellaneous Tools





MA

ST

ER

SE

TS




34945B 3/8" Drive Round Head Reversible Ratchet34993 3/8" Drive Universal Joint34988 3/8" Drive Extension 3" 34987 3/8" Drive Extension 6" 30012 3/8" Drive 12 Pt. Standard Inch Socket 3/8"30014 3/8" Drive 12 Pt. Standard Inch Socket 7/16"30016 3/8" Drive 12 Pt. Standard Inch Socket 1/2"30018 3/8" Drive 12 Pt. Standard Inch Socket 9/16"30020 3/8" Drive 12 Pt. Standard Inch Socket 5/8"30022 3/8" Drive 12 Pt. Standard Inch Socket 11/16"30024 3/8" Drive 12 Pt. Standard Inch Socket 3/4"30026 3/8" Drive 12 Pt. Standard Inch Socket 13/16"30028 3/8" Drive 12 Pt. Standard Inch Socket 7/8"BW-1162 Combination Wrench - Satin Finish 1/2"BW-1160 Combination Wrench - Satin Finish 3/8"BW-1164 Combination Wrench - Satin Finish 5/8"

BW-1161 Combination Wrench - Satin Finish 7/16"BW-1163 Combination Wrench - Satin Finish 9/16"BW-1166 Combination Wrench - Satin Finish 3/4"AW-1008-1 Adjustable Wrench 8"ST-1081S Phillips® Tip Screwdriver 3" Blade, No. 1 Pt.ST-1082S Phillips® Tip Screwdriver 4" Blade, No. 2 Pt.ST-1006S Round Shank Slotted Tip Screwdriver 6" Blade, 5/16" TipST-1004S Round Shank Slotted Tip Screwdriver 1/4" slotST-1151S Pocket Screwdriver 2" Blade, No. 0 Pt.PT-1002-1 6" Heavy Duty Slip JointPT-1250-1 Plier Arc Joint 9-1/210-099 Utility KnifeHT-1005-1 Ball Pein Hammer 16 oz33-212 PowerLock® Tape Rule 12'94100B Black Tool Box with Tray

30 PIECE MASTER TOOL SETITEM NO. 9730-BX• Weight: 16 lbs.

13 Sockets & Accessories7 Wrenches5 Screwdrivers2 Pliers3 Miscellaneous Tools

30 PIECE MASTER TOOL SETITEM NO. 9730-B



Shown above: quick release positive-grip ratchet. Chrome plated with full-polish finish, 45 tooth double pawl design, 4.0 degree swing arc, knurled speed ring and 10" long. Limited Lifetime Warranty. Made in the USA. 1-800-800-TOOL or www.stanleyproto.com


COMBINATION SOCKET SETS.CHOOSE THE SET THAT WORKS BEST FOR YOU.

The Combination Socket Sets program includes multi-drive standard and metric tools with accessories,

as well as single drive socket sets. Each set comes with a plastic box or a clip rail to help you store,

protect and organize your tools.

Sockets Sets.qxd 6/24/05 1:33 PM Page 51

Phillips® is a registered trademark of Phillips Screw Co.Torx® is a registered trademark of Textron.Visit us at...

www.stanleyproto.com52

CO

MB

INA

TIO

NS

OC

KE

TS

ET

S

ITEM NO. 97110• Weight: 18.3 lbs.






34960 1/4" Drive 1/4" X 3/8" Adapter









































30326 3/8" Drive Spark Plug Socket 13/16" Universal







130-PIECE 1/4", 3/8" AND 1/2" DRIVE METRIC AND FRACTIONAL TOOL SET



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S



1 / 4 " , 3 / 8 " & 1 / 2 " D R I V E S O C K E T S E T S





34010M 12 Pt. Standard Metric Socket 3/8" Dr. 10 mm

















HW-1609M 12 Pt. Deep Metric Socket 3/8" Drive 9 mm






















BW-1160 Combination Wrench- Satin Finish 3/8"




BW-1110M Combination Wrench Metric- Satin Finish 10 mm


BW-1114M Combination Wrench Metric- Satin Finish14 mm


4985 7 Pc Hex Key Set-Metric

4982 7 Pc Hex Key Set-Inch

900-21 Insert Bit Phillips® # 1 Pt.

900-22 Insert Bit Phillips® # 2 Pt.

900-23 Insert Bit Phillips® #3 Pt.

9000H Insert Bit Holder

900-4 Insert Bit Slotted Bit 3/16"









ITEM NO. 97110 (CONTINUED)• Weight: 18.3 lbs.






CO

MB

INA

TIO

NS

OC

KE

TS

ET

S

ITEM NO. 97118• Weight: 20 lbs.



9000H 1/4" Drive Hex Bit Holder














































GW-613M 6 Pt. Standard Metric Socket 13 mm





30412 3/8" Drive 12 Pt. Deep Inch Socket 3/8"







CO

MB

INA

TIO

NS

OC

KE

TS

ET

S




30012 3/8" Drive 12 Pt. Standard Inch Socket 3/8"








34009M 3/8" Drive 12 Pt. Standard Metric Socket 9 mm











HW-1510M 3/8" Drive 6 Pt. Deep Metric Socket 10 mm



















49945B 1/2" Drive Round Head Reversible Ratchet.









BW-1162 Combination Wrench - Satin Finish 1/2"



BW-1161 Combination Wrench- Satin Finish /16"

BW-1163 Combination Wrench- Satin Finish /16"











ITEM NO. 97118 (CONTINUED)• Weight: 20 lbs.





CO

MB

INA

TIO

NS

OC

KE

TS

ET

S


GW-9898 1/4" Drive 3" Extension


GW-9945B 1/4" Drive Round Head Knurled Reversible Ratchet








































34945B 3/8" Drive Round Head Knurled Reversible Ratchet

HW-1520S Spark Plug Socket 3/8" Drive 5/8"


34984 3/8" Drive 11" Extension











































34965 1/2" Drive 1/2" x 3/8" Adapter










Contents Description

99 PIECE 1/4", 3/8" AND 1/2" DRIVE STANDARD AND METRIC SETITEM NO. 9796 • Weight: 18.00 lbs.





CO

MB

INA

TIO

NS

OC

KE

TS

ET

S






















































































• Weight: 13.00 lbs.

Contents Description Contents Description Contents Description

82 PIECE 1/4", 3/8" AND 1/2" DRIVE STANDARD AND METRIC SETITEM NO. 9782-B




CO

MB

INA

TIO

NS

OC

KE

TS

ET

S

GW-604M 6 Pt. Socket 1/4" Drive 4 mm










GW-1605 6 Pt. Socket 1/4" Drive 5/32"










GW-506M 6 Pt. Deep Socket 1/4" Drive 6 mm







GW-1508 6 Pt. Deep Socket 1/4" Drive 1/4"



















32009M 6 Pt. Socket 3/8" Drive 9 mm









30612 6 Pt. Socket 3/8" Drive 3/8"

30614 6 Pt. Socket 3/8" Drive 7/16"

30616 6 Pt. Socket 3/8" Drive 1/2"

30618 6 Pt. Socket 3/8" Drive 9/16"

30620 6 Pt. Socket 3/8" Drive 5/8"

30622 6 Pt. Socket 3/8" Drive 11/16"

30624 6 Pt. Socket 3/8" Drive 3/4"

30626 6 Pt. Socket 3/8" Drive 13/16"

HW-1510M 6 Pt. Deep Socket 3/8" Drive 10 mm





HW-1512 6 Pt. Deep Socket 3/8" Drive 3/8"





31108 8 Pt. Socket 3/8" Drive 1/4"

31110 8 Pt. Socket 3/8" Drive 5/16"

31112 8 Pt. Socket 3/8" Drive 3/8"

31114 8 Pt. Socket 3/8" Drive 7/16"

31116 8 Pt. Socket 3/8" Drive 1/2"












30012 12 Pt. Socket 3/8" Drive 3/8"

30014 12 Pt. Socket 3/8" Drive 7/16"

30016 12 Pt. Socket 3/8" Drive 1/2"

30018 12 Pt. Socket 3/8" Drive 9/16"

30020 12 Pt. Socket 3/8" Drive 5/8"

30022 12 Pt. Socket 3/8" Drive 11/16"

30024 12 Pt. Socket 3/8" Drive 3/4"

30026 12 Pt. Socket 3/8" Drive 13/16"


34948B 3/8" Drive Mini Flex Ratchet





34963 3/8" Drive 3/8" to 1/4" Adapter


104 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9299NB • Weight: 14.11 lbs.




CO

MB

INA

TIO

NS

OC

KE

TS

ET

S



1 / 4 " & 3 / 8 " D R I V E S O C K E T S E T S

Contents Description Contents Description Contents Description

75 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9775 • Weight: 10.00 lbs.





























HW-1520S 3/8" Drive Spark Plug Socket 3/8" Drive 5/8"









































9000-T10 Insert Bit Torx® T10





9000H 1/4" Drive Hex Bit Holder




CO

MB

INA

TIO

NS

OC

KE

TS

ET

S























34963 3/8" Drive 3/8" x 1/4" Adapter


HW-1520S Spark Plug Socket 5/8"
















ZW-53 13 Pc. Hex Key Wrench Set












9000-H 1/4" Drive Hex Bit Holder


66 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9753-B • Weight: 4.60 lbs.



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S































34963 3/8" Drive 3/8" x 1/4" Adapter











































CO

MB

INA

TIO

NS

OC

KE

TS

ET

S


GW-604M 1/4" Drive 6 Pt. Standard Metric Socket 4 mm










GW-1606 1/4" Drive 6 Pt. Standard Inch Socket 3/16"



















GW-1508 1/4" Drive 6 Pt. Deep Inch Socket 1/4"






























HW-1512 3/8" Drive 6 Pt. Deep Inch Socket 3/8"





64 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 97065• Weight: 7.10 lbs.



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S





























































CO

MB

INA

TIO

NS

OC

KE

TS

ET

S























































50 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9251NB • Weight: 5.25 lbs.




CO

MB

INA

TIO

NS

OC

KE

TS

ET

S


34986B 3/8" Drive Flex Handle





























900-70 1/4" Hex Bit Holder


30 PIECE 1/4" AND 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9731-B • Weight: 2.00 lbs.



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S




23 PIECE 1/4" AND 3/8" DRIVE STANDARD SET• Weight: 5.30 lbs.

Item No. Contents Description

1323ANB GW-9550 1/4" Drive Spinner














34963 3/8" Drive 3/8" x 1/4" Adapter









27 PIECE 1/4" DRIVE STANDARD AND METRIC SET• Weight: 2.10 lbs.


1427 GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"





























CO

MB

INA

TIO

NS

OC

KE

TS

ET

S

21 PIECE 1/4" DRIVE STANDARD SET• Weight: 2.00 lbs.


1421-NB GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"




















GW-9578 1/4" Drive Universal Joint

21 PIECE 1/4" DRIVE METRIC SET• Weight: 2.00 lbs.


1421-MNB GW-605M 6 Pt. Standard Metric Socket 1/4" Drive 5 mm



















GW-9578 1/4" Drive Universal Joint




CO

MB

INA

TIO

NS

OC

KE

TS

ET

S



1 / 4 " D R I V E S O C K E T S E T S



1412NB GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"


























12 PIECE 1/4" DRIVE METRIC SOCKET SET• Weight: 0.62 lbs.














Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S

10 PIECE 1/4" DRIVE STANDARD SOCKET SET• Weight: 0.54 lbs.


110-CNB GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"










Clip Rail



110-A GW-1705 12 Pt. Standard Inch Socket 1/4" Drive 5/32"










Clip Rail



1412-6M GW-705M 12 Pt. Standard Metric Socket 1/4" Drive 5 mm










Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S




10 PIECE 1/4" DRIVE METRIC DEEP SOCKET SET• Weight: 1.00 lbs.


110-CM GW-504M 6 Pt. Deep Metric Socket 1/4" Drive 4 mm










Clip Rail



110-AM GW-1605M 12 Pt. Deep Metric Socket 1/4" Drive 5 mm









Clip Rail

7 PIECE 1/4" DRIVE STANDARD DEEP SOCKET SET• Weight: 0.58 lbs.


107-CNB GW-1508 6 Pt. Deep Inch Socket 1/4" Drive 1/4"







Clip Rail



107-A GW-1408 12 Pt. Deep Inch Socket 1/4" Drive 1/4"







Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S




































34 PIECE 3/8" DRIVE STANDARD AND METRIC SETITEM NO. 9934 • Weight: 8.20 lbs.



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S
































34950X 3/8" Drive Indexible Head Ratchet



30 PIECE 3/8" DRIVE STANDARD AND METRIC INDEXIBLE SETITEM NO. 9930X • Weight: 8.10 lbs.



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S






8924MNB 32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm


























3824-MNB HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mm


























CO

MB

INA

TIO

NS

OC

KE

TS

ET

S



8921NB 30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"













































CO

MB

INA

TIO

NS

OC

KE

TS

ET

S






3820-S 30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"






















3819-DS 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"





















CO

MB

INA

TIO

NS

OC

KE

TS

ET

S



3818-M 32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm


















16 PIECE 3/8" DRIVE STANDARD AND METRIC SET• Weight: 9.60 lbs.


3816-MS 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"


















CO

MB

INA

TIO

NS

OC

KE

TS

ET

S






3814ANB 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"
















213-BNB 32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm













Clip Rail















Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S































29 PIECE 3/8" DRIVE METRIC SETITEM NO. 3829-M • Weight: 8.1 lbs.




CO

MB

INA

TIO

NS

OC

KE

TS

ET

S
















3811-MNB 32007M 6 Pt. Standard Metric Socket 3/8" Drive 7 mm











10 PIECE 3/8" DRIVE METRIC IMPACT SOCKET SET• Weight: 1.20 lbs.


3810-M U-1508M 6 Pt. Standard Metric Impact Socket 3/8" Drive 8 mm










Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S




10 PIECE 3/8" DRIVE METRIC DEEP IMPACT SOCKET SET• Weight: 1.20 lbs.


3810 U-1608M 6 Pt. Deep Metric Impact Socket 3/8" Drive 8 mm

U-1609M 6 Pt. Deep Metric Impact Socket 3/8" Drive 9 mm









Clip Rail

10 PIECE 3/8" DRIVE CROWFOOT SET• Weight: 1.27 lbs.• Satin finish.

Item No. Contents Size

BCF-50NB BCF-12 3/8"BCF-14 7/16"BCF-16 1/2"BCF-18 9/16"BCF-20 5/8"BCF-22 11/16"BCF-24 3/4"BCF-26 13/16"BCF-28 7/8"BCF-32 1"Clip Rail

10 PIECE 3/8" DRIVE CROWFOOT SET – METRIC• Weight: 1.11 lbs.• Satin finish.


BCF-50MNB BCF-10M 10 mmBCF-11M 11 mmBCF-12M 12 mmBCF-13M 13 mmBCF-14M 14 mmBCF-15M 15 mmBCF-17M 17 mmBCF-19M 19 mmBCF-21M 21 mmBCF-22M 22 mmClip Rail



3809-6 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"









Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S



3809-B 30012 12 Pt. Standard Inch Socket 3/8" Drive 3/8"









Clip Rail



3809-DS HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"









Clip Rail



3809-D6 30412 12 Pt. Deep Inch Socket 3/8" Drive 3/8"









Clip Rail



208-M 30612 6 Pt. Standard Inch Socket 3/8" Drive 3/8"








Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S






209-CNB HW-1512 6 Pt. Deep Inch Socket 3/8" Drive 3/8"








Clip Rail



206-CNB HW-1510M 6 Pt. Deep Metric Socket 3/8" Drive 10 mm








Clip Rail



202-C HW-1610M 12 Pt. Deep Metric Socket 3/8" Drive 10 mm








Clip Rail



218-BNB 31108 8 Pt. Standard Inch Socket 3/8" Drive 1/4"





Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S

8 PIECE 3/8" DRIVE IMPACT SOCKET SET• Weight: 0.90 lbs.


U-1500 U-1508 1/4" .

U-1510 5/16"

U-1512 3/8"

U-1514 7/16"

U-1516 1/2"

U-1518 9/16"

U-1520 5/8"

U-1522 11/16"

Clip Rail



U-1501M U-1510M 10 mm

U-1512M 12 mm

U-1513M 13 mm

U-1514M 14 mm

U-1515M 15 mm

U-1517M 17 mm

U-1518M 18 mm

U-1519M 19 mm

Clip Rail

7 PIECE 3/8" DRIVE STANDARD UNIVERSAL SOCKET SET• Weight: 1.20 lbs.


208-CNB 30212 6 Pt. Universal Inch Socket 3/8" Drive 3/8"

30214 6 Pt. Universal Inch Socket 3/8" Drive 7/16"






Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S




7 PIECE 3/8" DRIVE METRIC UNIVERSAL SOCKET SET• Weight: 1.20 lbs.


207-M 30209M 6 Pt. Universal Metric Socket 3/8" Drive 9 mm

30210M 6 Pt. Universal Metric Socket 3/8" Drive 10 mm






Clip Rail

13 PIECE 3/8" DRIVE STANDARD INDEXIBLE SET• Weight: 2.50 lbs.


9913X 30010 6 Pt. Standard Inch Socket 3/8" Drive 5/16"













13 PIECE 3/8" DRIVE METRIC INDEXIBLE SET• Weight: 2.50 lbs.


9913XM 32010M 6 Pt. Standard Metric Socket 3/8" Drive 10 mm















CO

MB

INA

TIO

NS

OC

KE

TS

ET

S

13 PIECE 3/8" DRIVE STANDARD AND METRIC HEX BIT SOCKET SET• Weight: 1.50 lbs.


237-MB HW-9404M Hex Bit Metric Socket 3/8" Drive 4 mm

HW-9405M Hex Bit Metric Socket 3/8" Drive 5 mm





HW-9442 Hex Bit Inch Socket 3/8" Drive 1/8"







Clip Rail

8 PIECE 3/8" DRIVE STANDARD AND METRIC HEX BIT SET• Weight: 1.50 lbs.


238-MB HW-9449 Hex Bit Inch Socket 3/8" Drive 3/16"








Clip Rail

8 PIECE 3/8" DRIVE STANDARD HEX BIT SOCKET SET• Weight: 1.02 lbs.


237-B HW-9442 Hex Bit Inch Socket 3/8" Drive 1/8"








Clip Rail

5 PIECE 3/8" DRIVE STANDARD HEX BIT SOCKET SET• Weight: 0.80 lbs.


235-M HW-9447 Hex Bit Inch Socket 3/8" Drive 1/4"





Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S




6 PIECE 3/8" DRIVE METRIC HEX BIT SOCKET SET• Weight: 0.82 lbs.


237-MNB HW-9404M 4 mm

HW-9405M 5 mm

HW-9406M 6 mm

HW-9407M 7 mm

HW-9408M 8 mm

HW-9410M 10 mm

Clip Rail

3 PIECE 3/8" DRIVE SOCKET ADAPTER SET• Weight: 0.82 lbs.

Item No. Contents

AS3 1/4" to 3/8" Socket Adapter

3/8" to 1/2" Socket Adapter

1/2" to 3/4" Socket Adapter



1226-S 40614 6 Pt. Standard Inch Socket 1/2" Drive 7/16"

























49988B 1/2" Drive Flex Handle Ratchet



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S



1226-NB 40416 6 Pt. Deep Socket 1/2" Drive 1/2"

40418 6 Pt. Deep Socket 1/2" Drive 9/16"







40432 6 Pt. Deep Socket 1/2" Drive 1"

40614 6 Pt. Socket 1/2" Drive 7/16"

40616 6 Pt. Socket 1/2" Drive 1/2"

40618 6 Pt. Socket 1/2" Drive 9/16"

40620 6 Pt. Socket 1/2" Drive 5/8"

40622 6 Pt. Socket 1/2" Drive 11/16"

40624 6 Pt. Socket 1/2" Drive 3/4"

40626 6 Pt. Socket 1/2" Drive 13/16"

40628 6 Pt. Socket 1/2" Drive 7/8"

40630 6 Pt. Socket 1/2" Drive 15/16"

40632 6 Pt. Socket 1/2" Drive 1"

40634 6 Pt. Socket 1/2" Drive 1-1/16"

40636 6 Pt. Socket 1/2" Drive 1-1/8"

40640 6 Pt. Socket 1/2" Drive 1-1/4"

49945B 1/2" Drive Round Head Ratchet

























CO

MB

INA

TIO

NS

OC

KE

TS

ET

S












































CO

MB

INA

TIO

NS

OC

KE

TS

ET

S


















Clip Rail


















Clip Rail



1215 40114 12 Pt. Standard Inch Socket 1/2" Drive 7/16"














CO

MB

INA

TIO

NS

OC

KE

TS

ET

S

















Clip Rail



314-C 40316 12 Pt. Deep Inch Socket 1/2" Drive 1/2"









40334 12 Pt. Deep Inch Socket 1/2" Drive 1-1/16"

40336 12 Pt. Deep Inch Socket 1/2" Drive 1-1/8"

Clip Rail

11 PIECE 1/2" DRIVE STANDARD IMPACT SOCKET SET• Weight: 3.42 lbs.


310-BNB UW-1614 6 Pt. Standard Inch Impact Socket 1/2" Drive 7/16"









UW-1632 6 Pt. Standard Inch Impact Socket 1/2" Drive 1"

UW-1634 6 Pt. Standard Inch Impact Socket 1/2" Drive 1-1/16"

Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S



311-BM UW-610M 6 Pt. Standard Metric Impact Socket 1/2" Drive 10 mm











Clip Rail

11 PIECE 1/2" DRIVE STANDARD DEEP IMPACT SOCKET SET• Weight: 7.20 lbs.


311-CNB UW-1514 6 Pt. Deep Inch Impact Socket 1/2" Drive 7/16"

UW-1516 6 Pt. Deep Inch Impact Socket 1/2" Drive 1/2"








UW-1532 6 Pt. Deep Inch Impact Socket 1/2" Drive 1"

UW-1534 6 Pt. Deep Inch Impact Socket 1/2" Drive 1-1/16"

Clip Rail

11 PIECE 1/2" DRIVE METRIC DEEP IMPACT SOCKET SET• Weight: 7.20 lbs.


311-DM UW-510M 6 Pt. Deep Metric Impact Socket 1/2" Drive 10 mm

UW-511M 6 Pt. Deep Metric Impact Socket 1/2" Drive 11 mm










Clip Rail



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S
















Clip Rail













Clip Rail



310-C 45010M 6 Pt. Deep Metric Socket 1/2" Drive 10 mm










Clip Rail



309-M 44010M 12 Pt. Deep Metric Socket 1/2" Drive 10 mm










Clip Rail


Torx® is a registered trademark of Textron.Visit us at...www.stanleyproto.com94

CO

MB

INA

TIO

NS

OC

KE

TS

ET

S



309-BS 40416 6 Pt. Deep Inch Socket 1/2" Drive 1/2"









Clip Rail











Clip Rail

28 PIECE 3/4" DRIVE STANDARD DRIVE SET• Weight: 67.00 lbs.


428-BS 60026A 12 Pt. Standard Inch Socket 3/4" Drive 3/4"

























69997 3/4" Drive Sliding-Tee



Metal Box



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S



1 / 4 " , 3 / 8 " , 1 / 2 " & 3 / 4 " D R I V E S O C K E T S E T S


















Metal Box



411-BNB 60030 12 Pt. Socket 3/4" Drive 15/16"

60032 12 Pt. Socket 3/4" Drive 1"

60034 12 Pt. Socket 3/4" Drive 1-1/16"

60036 12 Pt. Socket 3/4" Drive 1-1/8"

60040 12 Pt. Socket 3/4" Drive 1-1/4"

60044 12 Pt. Socket 3/4" Drive 1-3/8"

60046 12 Pt. Socket 3/4" Drive 1-7/16"

60048 12 Pt. Socket 3/4" Drive 1-1/2"

60052 12 Pt. Socket 3/4" Drive 1-5/8"



Metal Box

12 PIECE 1/4", 3/8" AND 1/2" DRIVE INTERNAL TORX® SOCKET SET• Weight: 0.98 lbs.


TS-612NB TS-1210 Internal Socket Socket 1/4" Drive T10

TS-1215 Internal Socket 1/4" Drive T15











TS-612C Plastic Holder


1 / 4 " , 3 / 8 " & S O C K E T S E T S



CO

MB

INA

TIO

NS

OC

KE

TS

ET

S

7 PIECE 1/4" AND 3/8" DRIVE EXTERNAL TORX® SOCKET SET• Weight: 0.52 lbs.


TS-627NB TS-2206 External Socket 1/4" Drive E6

TS-2207 External Socket 1/4" Drive E7






TS-627C Plastic Holder

26 PIECE 1/4" DRIVE STANDARD AND METRIC RATCHETING SET• Weight: 1.14 lbs.


9026NB GW-1606 6 Pt. Standard Inch Socket 1/4" Drive 3/16"














9000-T10 Insert Bit Torx® Bit T10







900-4 Insert Bit Slotted Bit, 3/16"



9000-A Insert Bit Adapter Socket

9000R Insert Bit Ratcheting Screwdriver


SOCKETS & ACCESSORIES.DESIGNED TO INCREASE TORQUE.

The radius corner design of BlackhawkTM by Proto® sockets allows contact with the flat edges of the fastener,

not the points. This style of contact moves the driving force from the corners to the flat areas, increasing the

torque on the fastener, reducing rounding and increasing safety. Ratchets, sockets and accessories are

double-nickel chrome plated for a corrosion resistant, full polish finish.

Sockets & Accessories.qxd 6/24/05 1:35 PM Page 97


SO

CK

ET

S&

AC

CE

SS

OR

IES

1/4" DRIVE QUICK RELEASE RATCHET• Full polish.• Chrome plated positive grip ratchet.• 43 tooth design, double pawl. • 8.4 degrees of arc required for new “bite.”• Works easily in confined areas.• Knurled speed ring means you can start the fastener without turning the handle.

Item No. Description Length Weight

GW-9955B Quick Release Ratchet 5.75" 0.31 lbs.

ASME B107.10M

1/4" DRIVE ROUND HEAD REVERSIBLE RATCHET• Chrome plated positive grip ratchet.• 43 tooth design.• Works easily in confined areas.• Knurled speed ring means you can start the fastener without turning the handle.


GW-9945B 43 Tooth 5.80" 0.41 lbs.

GW-9945BR Ratchet Renewal Kit

ASME B107.10M

1/4" DRIVE FLEX HEAD RATCHET• Features the same design as our standard ratchet (GW-9945B).• No grooves or ball bearing to wear out in the hinge.• Springs in each of the forks of the hinge allow for infinite angles.


GW-9935B 43 Tooth Flex-Head 6.68" 0.38 lbs.

GW-9945BR Ratchet Renewal Kit

1/4" DRIVE ROTATORTM RATCHET• Handle rotates 360º in either direction for rapid “twist-action” nut and fastener

application and removal.• Pear head design.• Quick-release switch for fast socket removal.

Item No. Length Weight

GW-9946R 7.25" 0.50 lbs.

ASME B107.10M

1/4" DRIVE FLEX HANDLE


GW-9749B 5.90" 0.24 lbs.

ASME B107.10M

1/4" DRIVE EXTENSIONS


GW-9898 3.00" 0.08 lbs.

GW-9899 6.00" 0.16 lbs.

ASME B107.10M



SO

CK

ET

S&

AC

CE

SS

OR

IES



1/4" DRIVE FLEXIBLE SPINNER• Flexible shaft permits reaching around obstructions.


GW-9545 6.63" 0.14 lbs.

1/4" DRIVE SPINNER HANDLE


GW-9550 6" 0.20 lbs.

ASME B107.10M

1/4" DRIVE UNIVERSAL JOINT


GW-9578 1.25" 0.06 lbs.

ASME B107.10M

1/4" DRIVE ADAPTER

Part No. Female/Male Length Weight

34960 1/4" to 3/8" 1.0" 0.04 lbs.

ASME B107.10M

1/4" DRIVE SOCKETS — 6 POINT

Item No. Size Length Weight

GW-1605 5/32" 0.8" 0.03 lbs.

GW-1606 3/16" 0.8" 0.03 lbs.

GW-1607 7/32" 0.8" 0.03 lbs.

GW-1608 1/4" 0.8" 0.03 lbs.

GW-1609 9/32" 0.8" 0.03 lbs.

GW-1610 5/16" 0.8" 0.03 lbs.

GW-1611 11/32" 0.8" 0.04 lbs.

GW-1612 3/8" 0.8" 0.04 lbs.

GW-1614 7/16" 0.8" 0.05 lbs.

GW-1616 1/2" 0.8" 0.05 lbs.

ASME B107.1

1/4" DRIVE METRIC SOCKETS — 6 POINT


GW-604M 4 mm 0.8" 0.02 lbs

GW-645M 4.5 mm 0.8" 0.03 lbs

GW-605M 5 mm 0.8" 0.03 lbs

GW-655M 5.5 mm 0.8" 0.03 lbs

GW-606M 6 mm 0.8" 0.03 lbs

GW-607M 7 mm 0.8" 0.03 lbs

GW-608M 8 mm 0.8" 0.03 lbs

GW-609M 9 mm 0.8" 0.03 lbs

GW-610M 10 mm 0.8" 0.04 lbs

GW-611M 11 mm 0.8" 0.06 lbs

GW-612M 12 mm 0.8" 0.06 lbs

GW-613M 13 mm 0.8" 0.06 lbs

ASME B107.5M

1 / 4 " D R I V E R A T C H E T S , A C C E S S O R I E S & S O C K E T S



SO

CK

ET

S&

AC

CE

SS

OR

IES

1/4" DRIVE DEEP SOCKETS — 6 POINT


GW-1506 3/16" 1.9" 0.06 lbs.

GW-1507 7/32" 1.9" 0.06 lbs.

GW-1508 1/4" 1.9" 0.06 lbs.

GW-1509 9/32" 1.9" 0.06 lbs.

GW-1510 5/16" 1.9" 0.06 lbs.

GW-1511 11/32" 1.9" 0.08 lbs.

GW-1512 3/8" 1.9" 0.09 lbs.

GW-1514 7/16" 1.9" 0.10 lbs.

GW-1516 1/2" 1.9" 0.12 lbs.

ASME B107.1M

1/4" DRIVE DEEP METRIC SOCKETS — 6 POINT


GW-504M 4 mm 1.9" 0.05 lbs.

GW-505M 5 mm 1.9" 0.06 lbs.

GW-506M 6 mm 1.9" 0.06 lbs.

GW-507M 7 mm 1.9" 0.06 lbs.

GW-508M 8 mm 1.9" 0.06 lbs.

GW-509M 9 mm 1.9" 0.07 lbs.

GW-510M 10 mm 1.9" 0.09 lbs.

GW-511M 11 mm 1.9" 0.10 lbs.

GW-512M 12 mm 1.9" 0.11 lbs.

GW-513M 13 mm 1.9" 0.11 lbs.

ASME B107.5M



GW-1208 1/4" 0.8" 0.02 lbs.

GW-1210 5/16" 0.8" 0.04 lbs.

GW-1212 3/8" 0.8" 0.06 lbs.

ASME B107.1



GW-1705 5/32" 0.8" 0.02 lbs.

GW-1706 3/16" 0.8" 0.03 lbs.

GW-1707 7/32" 0.8" 0.03 lbs.

GW-1708 1/4" 0.8" 0.03 lbs.

GW-1709 9/32" 0.8" 0.03 lbs.

GW-1710 5/16" 0.8" 0.04 lbs.

GW-1711 11/32" 0.8" 0.04 lbs.

GW-1712 3/8" 0.8" 0.05 lbs.

GW-1714 7/16" 0.8" 0.05 lbs.

GW-1716 1/2" 0.8" 0.06 lbs.

ASME B107.1



GW-705M 5 mm 0.8" 0.01 lbs.

GW-755M 5.5 mm 0.8" 0.02 lbs.

GW-706M 6 mm 0.8" 0.02 lbs.

GW-707M 7 mm 0.8" 0.02 lbs.

GW-708M 8 mm 0.8" 0.02 lbs.

GW-709M 9 mm 0.8" 0.03 lbs.

GW-710M 10 mm 0.8" 0.04 lbs.

GW-711M 11 mm 0.8" 0.05 lbs.

GW-712M 12 mm 0.8" 0.05 lbs.

GW-713M 13 mm 0.8" 0.06 lbs.

ASME B107.5MTorx® is a registered trademark of Textron.



SO

CK

ET

S&

AC

CE

SS

OR

IES





GW-1406 3/16" 1.9" 0.02 lbs.

GW-1407 7/32" 1.9" 0.02 lbs.

GW-1408 1/4" 1.9" 0.02 lbs.

GW-1409 9/32" 1.9" 0.02 lbs.

GW-1410 5/16" 1.9" 0.02 lbs.

GW-1411 11/32" 1.9" 0.02 lbs.

GW-1412 3/8" 1.9" 0.03 lbs.

GW-1414 7/16" 1.9" 0.03 lbs.

GW-1416 1/2" 1.9" 0.04 lbs.

ASME B107.1



GW-1605M 5 mm 1.9" 0.07 lbs

GW-1606M 6 mm 1.9" 0.09 lbs

GW-1607M 7 mm 1.9" 0.09 lbs

GW-1608M 8 mm 1.9" 0.15 lbs

GW-1609M 9 mm 1.9" 0.06 lbs.

GW-1610M 10 mm 1.9" 0.04 lbs.

GW-1611M 11 mm 1.9" 0.04 lbs.

GW-1612M 12 mm 1.9" 0.10 lbs.

GW-1613M 13 mm 1.9" 0.11 lbs.

ASME B107.5M

1/4" DRIVE TORX® SOCKETS INTERNAL

Item No. Size Weight

TS-1209 T9 0.02 lbs.

TS-1210 T10 0.02 lbs.

TS-1215 T15 0.02 lbs.

TS-1220 T20 0.03 lbs.

TS-1225 T25 0.03 lbs.

TS-1227 T27 0.03 lbs.

TS-1230 T30 0.04 lbs.

1/4" DRIVE TAMPER-RESISTANT TORX® SOCKETS INTERNAL


TR-3210 T10 0.03 lbs.

TR-3215 T15 0.03 lbs.

TR-3220 T20 0.03 lbs.

TR-3225 T25 0.04 lbs.

TR-3227 T27 0.04 lbs.

TR-3230 T30 0.04 lbs.

1/4" DRIVE TORX® SOCKETS EXTERNAL


TS-2204 E4 0.04 lbs.

TS-2205 E5 0.04 lbs.

TS-2206 E6 0.04 lbs.

TS-2207 E7 0.04 lbs.

TS-2208 E8 0.04 lbs.

1/4" DRIVE HEX BIT HOLDER


9000H 1/4" 0.05 lbs.

1/4 " D R I V E S O C K E T S



SO

CK

ET

S&

AC

CE

SS

OR

IES

3/8" DRIVE QUICK RELEASE RATCHET• Full polish.• Chrome plated positive grip ratchet.• 41 tooth design, double pawl. • 8.8 degrees of arc required for new “bite.”• Works easily in confined areas.• Knurled speed ring means you can start the fastener without turning the handle.


34946B 41 Tooth Double Pawl 7.9" 0.76 lbs.

34946BR Ratchet Renewal Kit 0.20 lbs.

ASME B107.10M



34945B 41 Tooth 7.9" 0.79 lbs.


ASME B107.10M

3/8" DRIVE INDEXIBLE HEAD RATCHET• Full polish.• Chrome plated positive grip ratchet.• 5-position adjustable head allows the user to maneuver around obstructions and

allows access to hard-to-reach fasteners.• Head rotates 360° in the unlocked position to “speed” the fastener on or off.• Quick release feature holds sockets securely and releases them on demand.


34950X 60 Tooth 10" 0.99 lbs.

3/8" DRIVE BENT HANDLE FLEX-HEAD RATCHET


34947B 41 Tooth 10.9" 1.01 lbs.


3/8" DRIVE FLEX-HEAD RATCHET• Same head design as the 34945B.• No grooves or ball bearing to wear out in the hinge.• Springs in each of the forks of the hinge allow for infinite angles.


34935B 41 Tooth 11" 0.98 lbs.




SO

CK

ET

S&

AC

CE

SS

OR

IES



3/8" DRIVE MINI FLEX RATCHET• This compact flex head ratchet allows you to reach places inaccessible to

standard ratchets. • Head design is the same as the 34945B.


34948B 41 Tooth 5.9" 0.62 lbs.


3/8" DRIVE ROTATORTM RATCHET• Handle rotates 360º in either direction for rapid “twist-action” nut and fastener

application and removal.• Pear head design.• Quick-release switch for fast socket removal.


34950R 8.8" 1.0 lbs.

ASME B107.10M



34986B 9.8" 0.67 lbs.

ASME B107.10M

3/8" DRIVE SPEEDER


34982 15.5" 0.92 lbs.

ASME B107.10M



34989 1.7" 0.10 lbs.

34988 3.0" 0.16 lbs.

34987 6.0" 0.32 lbs.

34984 12.0" 0.63 lbs.

34983 20.0" 1.07 lbs.

ASME B107.10M



34993 Universal Joint 1.9" 0.14 lbs.

ASME B107.10M

3 / 8 " D R I V E R A T C H E T S & A C C E S S O R I E S



SO

CK

ET

S&

AC

CE

SS

OR

IES

3/8" DRIVE ADAPTERS

Item No. Female/Male Length Weight

34963 3/8" to 1/4" 0.60" 0.06 lbs.

34966 3/8" to 1/2" 1.40" 0.10 lbs.

ASME B107.10M

3/8" DRIVE SPARK PLUG SOCKETS — 6 POINT• Rubber insert included to help grip socket plug and reduce breakage.

Item No. Opening Weight

HW-1520S 5/8" 0.22 lbs.

HW-1526S 13/16" 0.33 lbs.

ASME B107.34M

3/8" DRIVE UNIVERSAL SPARK PLUG SOCKETS — 6 POINT• Rubber insert included to help grip socket plug and reduce breakage.


30320S 5/8" 3.3" 0.26 lbs.

30326 13/16" 3.5" 0.41 lbs.

ASME B107.34M

3/8" DRIVE UNIVERSAL SOCKETS — 6 POINT


30212 3/8" 1.7" 0.12 lbs.

30214 7/16" 1.8" 0.13 lbs.

30216 1/2" 1.8" 0.14 lbs.

30218 9/16" 1.8" 0.14 lbs.

30220 5/8" 1.9" 0.15 lbs.

30222 11/16" 1.9" 0.17 lbs.

30224 3/4" 2.0" 0.18 lbs.

ASME B107.1

3/8" DRIVE METRIC UNIVERSAL SOCKETS — 6 POINT


30209M 9 mm 1.7" 0.12 lbs.

30210M 10 mm 1.8" 0.13 lbs.

30211M 11 mm 1.8" 0.14 lbs.

30212M 12 mm 1.8" 0.14 lbs.

30213M 13 mm 1.9" 0.14 lbs.

30214M 14 mm 1.9" 0.14 lbs.

30215M 15 mm 2.0" 0.15 lbs.

ASME B107.5M



SO

CK

ET

S&

AC

CE

SS

OR

IES





30608 1/4" 0.9" 0.05 lbs.30010 5/16" 0.9" 0.05 lbs.30612 3/8" 0.9" 0.05 lbs.30614 7/16" 0.9" 0.05 lbs.30616 1/2" 1.0" 0.07 lbs.30618 9/16" 1.0" 0.08 lbs.30620 5/8" 1.0" 0.10 lbs.30622 11/16" 1.0" 0.10 lbs.30624 3/4" 1.1" 0.13 lbs.30626 13/16" 1.2" 0.15 lbs.30628 7/8" 1.2" 0.20 lbs.30630 15/16" 1.2" 0.22 lbs.30632 1" 1.4" 0.27 lbs.

ASME B107.1



32007M 7 mm 0.9" 0.05 lbs.32008M 8 mm 0.9" 0.05 lbs.32009M 9 mm 0.9" 0.05 lbs.32010M 10 mm 0.9" 0.05 lbs.32011M 11 mm 0.9" 0.06 lbs.32012M 12 mm 1.0" 0.06 lbs.32013M 13 mm 1.0" 0.07 lbs.32014M 14 mm 1.0" 0.08 lbs.32015M 15 mm 1.0" 0.09 lbs.32016M 16 mm 1.0" 0.10 lbs.32017M 17 mm 1.0" 0.12 lbs.32018M 18 mm 1.1" 0.13 lbs.32019M 19 mm 1.1" 0.14 lbs.32020M 20 mm 1.2" 0.18 lbs.32021M 21 mm 1.2" 0.17 lbs.32022M 22 mm 1.2" 0.21 lbs.

ASME B107.5M



31108 1/4" 0.9" 0.06 lbs.31110 5/16" 0.9" 0.06 lbs.31112 3/8" 0.9" 0.07 lbs.31114 7/16" 0.9" 0.10 lbs.31116 1/2" 1.0" 0.11 lbs.

ASME B107.1



30010A 5/16" 0.9" 0.05 lbs.30012 3/8" 0.9" 0.05 lbs.30014 7/16" 0.9" 0.05 lbs.30016 1/2" 0.9" 0.07 lbs.30018 9/16" 1.0" 0.09 lbs.30020 5/8" 1.0" 0.09 lbs.30022 11/16" 1.0" 0.10 lbs.30024 3/4" 1.1" 0.14 lbs.30026 13/16" 1.2" 0.15 lbs.30028 7/8" 1.2" 0.19 lbs.300301 15/16" 1.2" 0.30 lbs.300321 1" 1.4" 0.32 lbs.

ASME B107.1

3 / 8 " D R I V E S O C K E T S



SO

CK

ET

S&

AC

CE

SS

OR

IES



34007M 7 mm 0.9" 0.05 lbs.

34008M 8 mm 0.9" 0.05 lbs.

34009M 9 mm 0.9" 0.06 lbs.

34010M 10 mm 0.9" 0.06 lbs.

34011M 11 mm 0.9" 0.06 lbs.

34012M 12 mm 1.0" 0.06 lbs.

34013M 13 mm 1.0" 0.08 lbs.

34014M 14 mm 1.0" 0.08 lbs.

34015M 15 mm 1.0" 0.10 lbs.

34016M 16 mm 1.0" 0.10 lbs.

34017M 17 mm 1.0" 0.13 lbs.

34018M 18 mm 1.1" 0.14 lbs.

34019M 19 mm 1.1" 0.14 lbs.

34020M 20 mm 1.2" 0.17 lbs.

34021M 21 mm 1.2" 0.18 lbs.

34022M 22 mm 1.2" 0.21 lbs.

ASME B107.5M



HW-1510 5/16" 1.8" 0.09 lbs.

HW-1512 3/8" 1.8" 0.09 lbs.

HW-1514 7/16" 1.8" 0.10 lbs.

HW-1516 1/2" 1.8" 0.12 lbs.

HW-1518 9/16" 2.0" 0.18 lbs.

HW-1520 5/8" 2.1" 0.20 lbs.

HW-1522 11/16" 2.2" 0.24 lbs.

HW-1524 3/4" 2.2" 0.27 lbs.

HW-1526 13/16" 2.5" 0.33 lbs.

HW-1528 7/8" 2.5" 0.40 lbs.

HW-1530 15/16" 2.8" 0.50 lbs.

HW-1532 1" 2.8" 0.56 lbs.

ASME B107.1

3/8" DRIVE METRIC DEEP SOCKETS — 6 POINT


HW-1507M 7 mm 2.1" 0.10 lbs.

HW-1508M 8 mm 2.1" 0.10 lbs.

HW-1509M 9 mm 2.1" 0.11 lbs.

HW-1510M 10 mm 1.8" 0.11 lbs.

HW-1511M 11 mm 1.8" 0.11 lbs.

HW-1512M 12 mm 1.8" 0.12 lbs.

HW-1513M 13 mm 1.8" 0.13 lbs.

HW-1514M 14 mm 2.0" 0.16 lbs.

HW-1515M 15 mm 2.1" 0.21 lbs.

HW-1517M 17 mm 2.2" 0.22 lbs.

HW-1518M 18 mm 2.2" 0.22 lbs.

HW-1519M 19 mm 2.2" 0.33 lbs.

ASME B107.5M



SO

CK

ET

S&

AC

CE

SS

OR

IES





30412 3/8" 1.8" 0.09 lbs.

30414 7/16" 1.8" 0.09 lbs.

30416 1/2" 1.8" 0.12 lbs.

30418 9/16" 2.0" 0.16 lbs.

30420 5/8" 2.1" 0.18 lbs.

30422 11/16" 2.2" 0.23 lbs.

30424 3/4" 2.2" 0.25 lbs.

30426 13/16" 2.5" 0.32 lbs.

30428 7/8" 2.5" 0.38 lbs.

30430 15/16" 2.8" 0.47 lbs.

30432 1" 2.8" 0.52 lbs.

ASME B107.1

3/8" DRIVE METRIC DEEP SOCKETS — 12 POINT


HW-1607M 7 mm 2.1" 0.10 lbs.

HW-1608M 8 mm 2.1" 0.10 lbs.

HW-1609M 9 mm 2.1" 0.11 lbs.

HW-1610M 10 mm 1.8" 0.11 lbs.

HW-1611M 11 mm 1.8" 0.12 lbs.

HW-1612M 12 mm 1.8" 0.12 lbs.

HW-1613M 13 mm 1.8" 0.16 lbs.

HW-1614M 14 mm 1.8" 0.16 lbs.

HW-1615M 15 mm 2.8" 0.24 lbs.

HW-1616M 16 mm 2.8" 0.24 lbs.

HW-1617M 17 mm 2.8" 0.27 lbs.

HW-1618M 18 mm 2.8" 0.27 lbs.

HW-1619M 19 mm 2.8" 0.31 lbs.

ASME B107.5M

3/8" DRIVE CROWFOOT• Satin Finish.


BCF-12 3/8" 1.2" 0.06 lbs.

BCF-14 7/16" 1.2" 0.06 lbs.

BCF-16 1/2" 1.4" 0.07 lbs.

BCF-18 9/16" 1.4" 0.08 lbs.

BCF-20 5/8" 1.6" 0.09 lbs.

BCF-22 11/16" 1.6" 0.10 lbs.

BCF-24 3/4" 1.7" 0.11 lbs.

BCF-26 13/16" 1.7" 0.11 lbs.

BCF-28 7/8" 1.8" 0.12 lbs.

BCF-32 1" 1.8" 0.14 lbs.

ASME B107.21

3 / 8 " D R I V E S O C K E T S & C R O W F O O T



SO

CK

ET

S&

AC

CE

SS

OR

IES

3/8" DRIVE CROWFOOT – METRIC• Satin Finish.


BCF-10M 10 mm 1.2" 0.06 lbs.

BCF-11M 11 mm 1.2" 0.07 lbs.

BCF-12M 12 mm 1.4" 0.07 lbs.

BCF-13M 13 mm 1.4" 0.07 lbs.

BCF-14M 14 mm 1.4" 0.09 lbs.

BCF-15M 15 mm 1.6" 0.09 lbs.

BCF-16M 16 mm 1.6" 0.09 lbs.

BCF-17M 17 mm 1.6" 0.09 lbs.

BCF-19M 19 mm 1.7" 0.11 lbs.

BCF-21M 21 mm 1.7" 0.11 lbs.

BCF-22M 22 mm 1.7" 0.12 lbs.

ASME 107.21

3/8" DRIVE SLOTTED SCREWDRIVER BITS


HW-9504 3/16" Wide Tip 2" 0.10 lbs.

HW-9505 1/4" Wide Tip 2" 0.10 lbs.

HW-9506 5/16" Wide Tip 2" 0.11 lbs.

3/8" DRIVE PHILLIPS® SCREWDRIVER BITS


HW-9450 No. 1 0.09 lbs.

HW-9451 No. 2 0.10 lbs.

HW-9452 No. 3 0.10 lbs.

HW-9453 No. 4 0.10 lbs.




SO

CK

ET

S&

AC

CE

SS

OR

IES



3/8" DRIVE SOCKETS, CROWFOOT, SCREWDRIVER BITS & IMPACT

3/8" DRIVE TORX® SOCKETS INTERNAL


TS-1340 T40 0.07 lbs.

TS-1345 T45 0.08 lbs.

TS-1347 T47 0.08 lbs.

TS-1350 T50 0.09 lbs.

TS-1355 T55 0.11 lbs.

3/8" DRIVE TAMPER-RESISTANT TORX® SOCKETS INTERNAL


TR-3340 T10 0.08 lbs.

TR-3345 T15 0.09 lbs.

TR-3350 T20 0.10 lbs.

3/8" DRIVE TORX® SOCKETS EXTERNAL


TS-2308 E8 0.06 lbs.

TS-2310 E10 0.08 lbs.

TS-2312 E12 0.08 lbs.

TS-2314 E14 0.09 lbs.

TS-2316 E16 0.12 lbs.



SO

CK

ET

S&

AC

CE

SS

OR

IES

3/8" DRIVE HEX BIT SOCKETS


HW-9442 1/8" 2.0" 0.10 lbs.

HW-9443 9/64" 2.0" 0.10 lbs.

HW-9444 5/32" 2.0" 0.11 lbs.

HW-9449 3/16" 2.0" 0.11 lbs.

HW-9448 7/32" 2.0" 0.11 lbs.

HW-9447 1/4" 2.0" 0.11 lbs.

HW-9446 5/16" 2.0" 0.11 lbs.

HW-9445 3/8" 2.0" 0.13 lbs.

3/8" DRIVE METRIC HEX BIT SOCKETS


HW-9404M 4 mm 2.0" 0.10 lbs.

HW-9405M 5 mm 2.0" 0.11 lbs.

HW-9406M 6 mm 2.0" 0.11 lbs.

HW-9407M 7 mm 2.0" 0.11 lbs.

HW-9408M 8 mm 2.0" 0.11 lbs.

HW-9410M 10 mm 2.0" 0.12 lbs.

3/8" DRIVE IMPACT SOCKETS — 6 POINT


U-1508 1/4" 1.1" 0.08 lbs.

U-1510 5/16" 1.1" 0.09 lbs.

U-1512 3/8" 1.1" 0.09 lbs.

U-1514 7/16" 1.1" 0.09 lbs.

U-1516 1/2" 1.1" 0.09 lbs.

U-1518 9/16" 1.1" 0.11 lbs.

U-1520 5/8" 1.1" 0.14 lbs.

U-1522 11/16" 1.1" 0.17 lbs.

U-1524 3/4" 1.1" 0.17 lbs.

ASME B107.2



SO

CK

ET

S&

AC

CE

SS

OR

IES



3 /8 " D R I V E S O C K E T S & I M P A C T S O C K E T S

3/8" DRIVE METRIC IMPACT SOCKETS — 6 POINT


U-1508M 8 mm 1.0" 0.07 lbs.

U-1509M 9 mm 1.0" 0.04 lbs.

U-1510M 10 mm 1.0" 0.05 lbs.

U-1512M 12 mm 1.1" 0.09 lbs.

U-1513M 13 mm 1.1" 0.10 lbs.

U-1514M 14 mm 1.1" 0.11 lbs.

U-1515M 15 mm 1.1" 0.12 lbs.

U-1517M 17 mm 1.1" 0.16 lbs.

U-1518M 18 mm 1.1" 0.18 lbs.

U-1519M 19 mm 1.1" 0.19 lbs.

ASME B107.33M

3/8" DRIVE DEEP IMPACT SOCKETS — 6 POINT


U-1610 5/16" 2.8" 0.20 lbs.

U-1612 3/8" 2.8" 0.20 lbs.

U-1614 7/16" 2.8" 0.18 lbs.

U-1616 1/2" 2.8" 0.20 lbs.

U-1618 9/16" 2.8" 0.24 lbs.

U-1620 5/8" 2.8" 0.30 lbs.

U-1622 11/16" 2.8" 0.37 lbs.

U-1624 3/4" 2.8" 0.38 lbs.

ASME B107.2

3/8" DRIVE METRIC DEEP IMPACT SOCKETS — 6 POINT


U-1608M 8 mm 2.8" 0.20 lbs.

U-1609M 9 mm 2.8" 0.21 lbs.

U-1610M 10 mm 2.8" 0.20 lbs.

U-1611M 11 mm 2.8" 0.18 lbs.

U-1612M 12 mm 2.8" 0.21 lbs.

U-1613M 13 mm 2.8" 0.21 lbs.

U-1614M 14 mm 2.8" 0.27 lbs.

U-1615M 15mm 2.8" 0.27 lbs.

U-1616M 16 mm 2.8" 0.29 lbs.

U-1617M 17 mm 2.8" 0.37 lbs.

U-1618M 18 mm 2.8" 0.39 lbs.

U-1619M 19 mm 2.8" 0.39 lbs.

ASME B107.33M



SO

CK

ET

S&

AC

CE

SS

OR

IES

1/2" DRIVE QUICK RELEASE RATCHET • Full polish.• Chrome plated positive grip ratchet.• 45 tooth design, double pawl. • 8.0 degrees of arc required for new “bite.”• Works easily in confined areas.• Knurled speed ring means you can start the fastener without turning the handle.


49946B 45 Tooth Double Pawl 10.1" 1.22 lbs.


ASME B107.10M



49945B 45 Tooth 10.1" 1.34 lbs.


ASME B107.10M



49988B 17.8" 1.76 lbs.

ASME B107.10M

1/2" DRIVE SPEEDER


49992 17.8" 1.76 lbs.

ASME B107.10M



49964 2" 0.21 lbs.

49966 5" 0.46 lbs.

49990 10" 0.90 lbs.

49972 19" 1.92 lbs.

ASME B107.10M

1/2" DRIVE ADAPTERS


34965 1/2" to 3/8" 0.7" 0.13 lbs.

69992 1/2" to 3/4" 0.7" 0.25 lbs.

ASME B107.10M



SO

CK

ET

S&

AC

CE

SS

OR

IES



1 / 2 " D R I V E R A T C H E T S & A C C E S S O R I E S



49978 2.7" 0.29 lbs.

ASME B107.10M

1/2" DRIVE DRAG LINK SOCKET• A sturdy screwdriver type socket with bit for drag links, drain plugs, slotted nuts

and screws. • Will fit any standard 1/2" square drive tool.


49979 0.94" wide 0.18 lbs.

1/2" DRIVE SPARK PLUG SOCKETS — 6 POINT• Rubber insert included to help grip socket plug and reduce breakage.


40326S 13/16" 2.7" 0.36 lbs.

40320S 5/8" 2.5" 0.22 lbs.

ASME B107.34M



40612 3/8" 1.5" 0.10 lbs.

40614 7/16" 1.5" 0.11 lbs.

40616 1/2" 1.5" 0.13 lbs.

40618 9/16" 1.5" 0.14 lbs.

40620 5/8" 1.5" 0.14 lbs.

40622 11/16" 1.5" 0.19 lbs.

40624 3/4" 1.5" 0.19 lbs.

40626 13/16" 1.5" 0.19 lbs.

40628 7/8" 1.5" 0.24 lbs.

40630 15/16" 1.5" 0.26 lbs.

40632 1" 1.6" 0.30 lbs.

40634 1-1/16" 1.7" 0.35 lbs.

40636 1-1/8" 1.7" 0.42 lbs.

40640 1-1/4" 1.8" 0.48 lbs.

40642A 1-1/2" 2.3" 1.12 lbs.

ASME B107.1



43010M 10 mm 1.5" 0.11 lbs.

43011M 11 mm 1.5" 0.11 lbs.

43012M 12 mm 1.5" 0.12 lbs.

43013M 13 mm 1.5" 0.12 lbs.

43014M 14 mm 1.5" 0.14 lbs.

43015M 15 mm 1.5" 0.16 lbs.

43017M 17 mm 1.5" 0.16 lbs.

43019M 19 mm 1.5" 0.20 lbs.

43021M 21 mm 1.5" 0.21 lbs.

43022M 22 mm 1.5" 0.25 lbs.

43023M 23 mm 1.5" 0.26 lbs.

43024M 24 mm 1.5" 0.31 lbs.

43027M 27 mm 1.7" 0.44 lbs.

ASME B107.5M



SO

CK

ET

S&

AC

CE

SS

OR

IES



40112 3/8" 1.5" 0.11 lbs.

40114 7/16" 1.5" 0.11 lbs.

40116 1/2" 1.5" 0.12 lbs.

40118 9/16" 1.5" 0.12 lbs.

40120 5/8" 1.5" 0.12 lbs.

40122 11/16" 1.5" 0.16 lbs.

40124 3/4" 1.5" 0.16 lbs.

40126 13/16" 1.5" 0.18 lbs.

40128 7/8" 1.5" 0.22 lbs.

40130 15/16" 1.5" 0.28 lbs.

40132 1" 1.6" 0.30 lbs.

40134 1-1/16" 1.7" 0.32 lbs.

40136 1-1/8" 1.7" 0.39 lbs.

40138 1-3/16" 1.8" 0.70 lbs.

40140 1-1/4" 1.8" 0.70 lbs.

40144A 1-1/2" 2.3" 0.70 lbs.

ASME B107.1



42010M 10 mm 1.5" 0.10 lbs.

42011M 11 mm 1.5" 0.11 lbs.

42012M 12 mm 1.5" 0.12 lbs.

42013M 13 mm 1.5" 0.12 lbs.

42014M 14 mm 1.5" 0.12 lbs.

42015M 15 mm 1.5" 0.12 lbs.

42016M 16 mm 1.5" 0.12 lbs.

42017M 17 mm 1.5" 0.17 lbs.

42018M 18 mm 1.5" 0.17 lbs.

42019M 19 mm 1.5" 0.18 lbs.

42020M 20 mm 1.5" 0.19 lbs.

42021M 21 mm 1.5" 0.20 lbs.

42022M 22 mm 1.5" 0.25 lbs.

42023M 23 mm 1.5" 0.26 lbs.

42024M 24 mm 1.5" 0.28 lbs.

42025M 25 mm 1.6" 0.30 lbs.

42026M 26 mm 1.6" 0.33 lbs.

42027M 27 mm 1.7" 0.37 lbs.

42028M 28 mm 1.7" 0.44 lbs.

42030M 30 mm 1.7" 0.48 lbs.

42032M 32 mm 1.8" 0.50 lbs.

42036M 36 mm 2.2" 0.96 lbs.

ASME B107.5M



40416 1/2" 3.1" 0.27 lbs.

40418 9/16" 3.1" 0.29 lbs.

40420 5/8" 3.1" 0.27 lbs.

40422 11/16" 3.1" 0.32 lbs.

40424 3/4" 3.1" 0.41 lbs.

40426 13/16" 3.1" 0.42 lbs.

40428 7/8" 3.1" 0.50 lbs.

40430 15/16" 3.1" 0.54 lbs.

40432 1" 3.1" 0.62 lbs.

40434 1-1/16" 3.1" 0.76 lbs.

40436 1-1/8" 3.1" 0.79 lbs.

ASME B107.1



SO

CK

ET

S&

AC

CE

SS

OR

IES



1 /2 " D R I V E S O C K E T S



45010M 10 mm 3.1" 0.23 lbs.

45011M 11 mm 3.1" 0.28 lbs.

45012M 12 mm 3.1" 0.28 lbs.

45013M 13 mm 3.1" 0.28 lbs.

45014M 14 mm 3.1" 0.28 lbs.

45015M 15 mm 3.1" 0.28 lbs.

45016M 16 mm 3.1" 0.32 lbs.

45017M 17 mm 3.1" 0.33 lbs.

45018M 18 mm 3.1" 0.36 lbs.

45019M 19 mm 3.1" 0.37 lbs.

45020M 20 mm 3.1" 0.46 lbs.

45021M 21 mm 3.1" 0.47 lbs.

45022M 22 mm 3.1" 0.51 lbs.

45023M 23 mm 3.1" 0.51 lbs.

45024M 24 mm 3.1" 0.51 lbs.

45025M 25 mm 3.1" 0.62 lbs.

45026M 26 mm 3.1" 0.63 lbs.

45027M 27 mm 3.1" 0.65 lbs.

ASME B107.5M



40316 1/2" 3.1" 0.26 lbs.

40318 9/16" 3.1" 0.26 lbs.

40320 5/8" 3.1" 0.26 lbs.

40322 11/16" 3.1" 0.33 lbs.

40324 3/4" 3.1" 0.39 lbs.

40326 13/16" 3.1" 0.40 lbs.

40328 7/8" 3.1" 0.47 lbs.

40330 15/16" 3.1" 0.56 lbs.

40332 1" 3.1" 0.58 lbs.

40334 1-1/16" 3.1" 0.71 lbs.

40336 1-1/8" 3.1" 0.72 lbs.

ASME B107.1



44010M 10 mm 3.1" 0.25 lbs.

44011M 11 mm 3.1" 0.31 lbs.

44012M 12 mm 3.1" 0.27 lbs.

44013M 13 mm 3.1" 0.27 lbs.

44014M 14 mm 3.1" 0.29 lbs.

44015M 15 mm 3.1" 0.25 lbs.

44016M 16 mm 3.1" 0.26 lbs.

44017M 17 mm 3.1" 0.33 lbs.

44018M 18 mm 3.1" 0.38 lbs.

44019M 19 mm 3.1" 0.41 lbs.

44020M 20 mm 3.1" 0.44 lbs.

44021M 21 mm 3.1" 0.39 lbs.

44022M 22 mm 3.1" 0.50 lbs.

44023M 23 mm 3.1" 0.56 lbs.

44024M 24 mm 3.1" 0.54 lbs.

44025M 25 mm 3.1" 0.63 lbs.

44026M 26 mm 3.1" 0.60 lbs.

44027M 27 mm 3.1" 0.55 lbs.

ASME B107.5M



SO

CK

ET

S&

AC

CE

SS

OR

IES

1/2" DRIVE TORX® SOCKETS

Item No. Description Size Weight

TS-1460 Internal T60 0.25 lbs.

TS-2418 External E18 0.27 lbs.

1/2" DRIVE WHEEL IMPACT LUG SOCKET KIT — 6 POINT• To remove or install most wheel lugs with a 1/2" drive impact gun.• Kit includes a double-end socket with a 3/4" opening on one end and 13/16" on the

other and a 2-5/8" long extension bar.

Item No. Description Weight

UW-1505 Kit (Socket and Extension) 0.91 lbs.

UW-1500 Socket Only 2.8" 0.57 lbs.

UW-30 3" Extension Only 0.28 lbs.

1/2" DRIVE FRONT WHEEL DRIVE DEEP SOCKETFOR GM FRONT WHEEL AXLE NUTS — 6 POINT


UWP-430M 30 mm 3.5" 3.90 lbs.

UWP-436M 36 mm 3.5" 4.20 lbs.



UW-1612 3/8" 1.5" 0.18 lbs.

UW-1614 7/16" 1.5" 0.18 lbs.

UW-1616 1/2" 1.5" 0.19 lbs.

UW-1618 9/16" 1.5" 0.19 lbs.

UW-1620 5/8" 1.5" 0.22 lbs.

UW-1622 11/16" 1.5" 0.22 lbs.

UW-1624 3/4" 1.5" 0.26 lbs.

UW-1626 13/16" 1.6" 0.31 lbs.

UW-1628 7/8" 1.6" 0.40 lbs.

UW-1630 15/16" 1.8" 0.44 lbs.

UW-1632 1" 1.8" 0.53 lbs.

UW-1634 1-1/16" 1.8" 0.56 lbs.

UW-1636 1-1/8" 2.0" 0.66 lbs.

UW-1638 1-3/16" 2.0" 0.79 lbs.

UW-1640 1-1/4" 2.0" 0.82 lbs.

ASME B107.2


TS-1460 TS-2418



SO

CK

ET

S&

AC

CE

SS

OR

IES



1 /2 " D R I V E S O C K E T S

1/2" DRIVE METRIC IMPACT SOCKETS — 6 POINT


UW-610M 10 mm 1.5" 0.19 lbs.

UW-611M 11 mm 1.5" 0.18 lbs.

UW-612M 12 mm 1.5" 0.19 lbs.

UW-613M 13 mm 1.5" 0.17 lbs.

UW-614M 14 mm 1.5" 0.18 lbs.

UW-615M 15 mm 1.5" 0.19 lbs.

UW-616M 16 mm 1.5" 0.20 lbs.

UW-617M 17 mm 1.5" 0.23 lbs.

UW-618M 18 mm 1.5" 0.24 lbs.

UW-619M 19 mm 1.5" 0.25 lbs.

UW-620M 20 mm 1.6" 0.29 lbs.

UW-621M 21 mm 1.6" 0.33 lbs.

UW-622M 22 mm 1.6" 0.35 lbs.

UW-624M 24 mm 1.6" 0.44 lbs.

UW-627M 27 mm 2.0" 0.59 lbs.

ASME B107.33M



UW-1512 3/8" 3.3" 0.38 lbs.

UW-1514 7/16" 3.3" 0.43 lbs.

UW-1516 1/2" 3.3" 0.44 lbs.

UW-1518 9/16" 3.3" 0.46 lbs.

UW-1520 5/8" 3.3" 0.46 lbs.

UW-1522 11/16" 3.3" 0.47 lbs.

UW-1524 3/4" 3.3" 0.50 lbs.

UW-1526 13/16" 3.3" 0.61 lbs.

UW-1528 7/8" 3.5" 0.72 lbs.

UW-1530 15/16" 3.5" 0.83 lbs.

UW-1532 1" 3.5" 1.02 lbs.

UW-1534 1-1/16" 3.5" 1.03 lbs.

UW-1536 1-1/8" 3.5" 1.04 lbs.

ASME B107.2

1/2" DRIVE METRIC DEEP IMPACT SOCKETS — 6 POINT


UW-510M 10 mm 3.2" 0.43 lbs.

UW-511M 11 mm 3.3" 0.43 lbs.

UW-512M 12 mm 3.3" 0.43 lbs.

UW-513M 13 mm 3.3" 0.46 lbs.

UW-514M 14 mm 3.3" 0.44 lbs.

UW-515M 15 mm 3.3" 0.40 lbs.

UW-516M 16 mm 3.3" 0.37 lbs.

UW-517M 17 mm 3.3" 0.43 lbs.

UW-518M 18 mm 3.3" 0.412 lbs.

UW-519M 19 mm 3.3" 0.48 lbs.

UW-520M 20 mm 3.3" 0.57 lbs.

UW-521M 21 mm 3.3" 0.63 lbs.

UW-522M 22 mm 3.3" 0.68 lbs.

UW-524M 24 mm 3.3" 0.71 lbs.

UW-526M 26 mm 3.5" 1.04 lbs.

UW-527M 27 mm 3.5" 1.15 lbs.

ASME B107.33M



SO

CK

ET

S&

AC

CE

SS

OR

IES

1/2" DRIVE IMPACT EXTENSIONS


UW-30 1/2" 3" 0.28 lbs.

UW-24 1/2" 5" 0.45 lbs.

UW-25 1/2" 10" 0.99 lbs.

ASME B107.2

1/2" DRIVE IMPACT UNIVERSAL JOINT• Designed to provide flexibility when working in tight restricted areas. • Special “Ball Type Joint” gives this Universal Joint the added strength

necessary for its rugged application. • Black oxide finish.


49976 1/2" 3" 0.57 lbs.

ASME B107.2

3/4" DRIVE ROUND HEAD REVERSIBLE RATCHET• A positive-grip Ratchet the gives you extra strength for turning tough nuts. • Precision engineered, 45-tooth mechanism permits close acting operation. • Head is 2-3/8" in diameter.


69945B 45 Tooth 20.3" 5.27 lbs.


ASME B107.10M

3/4" DRIVE HEAVY-DUTY FLEX HANDLE


69998 19" 4.20 lbs.

ASME B107.10M

3/4" DRIVE HEAVY-DUTY SLIDE TEE HANDLE• For driving manually operated sockets.• Large leverage handle for comfortable application of force.• Movable/slidable squaredrive.• Final tightening can be done with both hands.


69997 20" 3.20 lbs.

ASME B107.10M

3/4" DRIVE HEAVY-DUTY EXTENSIONS


69993 4" 0.87 lbs.

69995 8" 1.36 lbs.

69994 16" 2.43 lbs.

ASME B107.10M

3/4" DRIVE HEAVY-DUTY ADAPTERS


49991 3/4" to 1/2" 1.9" 0.28 lbs.

ASME B107.10M



SO

CK

ET

S&

AC

CE

SS

OR

IES



1/2" DRIVE SOCKETS, 3/4" DRIVE RATCHETS & ACCESSORIES

3/4" DRIVE REDUCING ADAPTER• Permits use of 3/4" drive sockets with 1" drive tool.


69990 1" to 3/4" 3" 1.33 lbs.

ASME B107.10M

3/4" DRIVE HEAVY-DUTY SOCKETS — 12 POINT


60026A 3/4" 1.9" 0.32 lbs.

60027A 13/16" 1.9" 0.38 lbs.

60028 7/8" 1.9" 0.42 lbs.

60030 15/16" 1.9" 0.51 lbs.

60032 1" 1.9" 0.59 lbs.

60034 1-1/16" 1.9" 0.63 lbs.

60036 1-1/8" 2.2" 0.68 lbs.

60038 1-3/16" 2.2" 0.60 lbs.

60040 1-1/4" 2.3" 0.95 lbs.

60042 1-5/16" 2.3" 0.90 lbs.

60044 1-3/8" 2.3" 0.86 lbs.

60046 1-7/16" 2.4" 1.10 lbs.

60048 1-1/2" 2.4" 1.06 lbs.

60050 1-9/16" 2.6" 1.45 lbs.

60052 1-5/8" 2.6" 1.36 lbs.

60054 1-11/16" 2.7" 1.57 lbs.

60056 1-3/4" 2.7" 1.49 lbs.

60058 1-13/16" 2.9" 1.81 lbs.

60060 1-7/8" 2.9" 1.81 lbs.

60064 2" 3.1" 2.31 lbs.

60068 2-1/8" 3.2" 2.66 lbs.

60070 2-3/16" 3.2" 2.91 lbs.

60072 2-1/4" 3.4" 3.15 lbs.

60076 2-3/8" 3.6" 3.84 lbs.

ASME B107.1

3/4" DRIVE METRIC HEAVY-DUTY SOCKETS — 12 POINT


61019M 19 mm 1.9" 0.36 lbs.

61021M 21 mm 1.9" 0.37 lbs.

61022M 22 mm 1.9" 0.39 lbs.

61023M 23 mm 1.9" 0.50 lbs.

61024M 24 mm 1.9" 0.51 lbs.

61025M 25 mm 2.0" 0.53 lbs.

61026M 26 mm 2.0" 0.54 lbs.

61027M 27 mm 2.0" 0.61 lbs.

61028M 28 mm 2.2" 0.68 lbs.

61029M 29 mm 2.2" 0.69 lbs.

61030M 30 mm 2.2" 0.71 lbs.

61031M 31 mm 2.2" 0.77 lbs.

61032M 32 mm 2.2" 0.80 lbs.

61035M 35 mm 2.3" 0.86 lbs.

61036M 36 mm 2.4" 1.11 lbs.

61038M 38 mm 2.4" 1.22 lbs.

61041M 41 mm 2.6" 1.38 lbs.

61042M 42 mm 2.7" 1.81 lbs.

61046M 46 mm 2.9" 1.87 lbs.

61050M 50 mm 3.1" 2.36 lbs.

61054M 54 mm 3.2" 2.43 lbs.

61055M 55 mm 3.2" 2.58 lbs.

ASME B107.5M



SO

CK

ET

S&

AC

CE

SS

OR

IES

3 /4" D R I V E S O C K E T S



UW-2424 3/4" 1.9" 0.75 lbs.

UW-2426 13/16" 1.9" 0.75 lbs.

UW-2428 7/8" 2.0" 0.75 lbs.

UW-2430 15/16" 2.0" 0.78 lbs.

UW-2432 1" 2.1" 0.78 lbs.

UW-2434 1-1/16" 2.1" 0.78 lbs.

UW-2436 1-1/8" 2.2" 0.89 lbs.

UW-2438 1-3/16" 2.2" 1.02 lbs.

UW-2440 1-1/4" 2.2" 1.14 lbs.

UW-2442 1-5/16" 2.2" 1.25 lbs.

UW-2444 1-3/8" 2.3" 1.27 lbs.

UW-2446 1-7/16" 2.3" 1.42 lbs.

UW-2448 1-1/2" 2.3" 1.51 lbs.

ASME B107.2



UW-2624 3/4" 3.3" 1.30 lbs.

UW-2626 13/16" 3.3" 1.30 lbs.

UW-2628 7/8" 3.3" 1.35 lbs.

UW-2630 15/16" 3.3" 1.31 lbs.

UW-2632 1" 3.3" 1.23 lbs.

UW-2634 1-1/16" 3.3" 1.17 lbs.

UW-2636 1-1/8" 3.3" 1.27 lbs.

UW-2638 1-3/16" 3.3" 1.47 lbs.

UW-2640 1-1/4" 3.3" 1.64 lbs.

UW-2642 1-5/16" 3.3" 1.78 lbs.

UW-2644 1-3/8" 3.3" 1.87 lbs.

UW-2646 1-7/16" 3.5" 2.12 lbs.

UW-2648 1-1/2" 3.5" 2.45 lbs.

ASME B107.2

BUDD WHEEL SOCKETS — 6 POINT• Designed for quick application and removal of Budd type wheels. • Each socket has two openings, 13/16" square and 1-1/2" hex, eliminating the need

for two separate sockets.

Item No. Drive Size Length Weight

UWP-660 3/4" 4.0" 2.00 lbs.

UWP-1460 1" 4.0" 2.00 lbs.


WRENCHES.FOR AUTOMOTIVE AND LIGHT-INDUSTRIAL USE.

BlackhawkTM by Proto® wrenches are available in sets and as singles, in many styles and sizes, finished in

full polish, satin and black. Each wrench is corrosion resistant and easy to clean.

The torque wrench line is manufactured to precise specifications for maximum performance in torque

applications, available in two drive sizes with several torque ranges.

Wrenches.qxd 6/24/05 1:41 PM Page 121

18 PIECE FULL POLISH COMBINATION WRENCH SET–STANDARD AND METRIC• Weight: 11.00 lbs.


BW-9718NB BW-1156FP 1/4"

BW-1159FP 5/16"

BW-1160FP 3/8"

BW-1161FP 7/16"

BW-1162FP 1/2"

BW-1163FP 9/16"

BW-1164FP 5/8"

BW-1165FP 11/16"

BW-1166FP 3/4"

BW-1110MFP 10 mm

BW-1111MFP 11 mm

BW-1112MFP 12 mm

BW-1113MFP 13 mm

BW-1114MFP 14 mm

BW-1115MFP 15 mm

BW-1116MFP 16 mm

BW-1117MFP 17 mm

BW-1118MFP 18 mm

Wrench Roll

14 PIECE FULL POLISH COMBINATION WRENCH SET• Weight: 9.90 lbs.


BW-14PT BW-1159FP 5/16"

BW-1160FP 3/8"

BW-1161FP 7/16"

BW-1162FP 1/2"

BW-1163FP 9/16"

BW-1164FP 5/8"

BW-1165FP 11/16"

BW-1166FP 3/4"

BW-1167AFP 13/16"

BW-1167FP 7/8"

BW-1168FP 15/16"

BW-1170FP 1"

BW-1172FP 1-1/8"

BW-1173FP 1-1/4"

Wrench Roll


WR

EN

CH

ES

MADE IN

UUUU SSSS AAAA



WR

EN

CH

ES

14 PIECE FULL POLISH COMBINATION WRENCH SET – METRIC• Weight: 9.00 lbs.


BW-14MPT BW-1107MFP 7 mm

BW-1108MFP 8 mm

BW-1109MFP 9 mm

BW-1110MFP 10 mm

BW-1111MFP 11 mm

BW-1112MFP 12 mm

BW-1113MFP 13 mm

BW-1114MFP 14 mm

BW-1115MFP 15 mm

BW-1116MFP 16 mm

BW-1117MFP 17 mm

BW-1118MFP 18 mm

BW-1119MFP 19 mm

BW-1120MFP 20 mm

Wrench Roll



BW-11PT BW-1160FP 3/8"

BW-1161FP 7/16"

BW-1162FP 1/2"

BW-1163FP 9/16"

BW-1164FP 5/8"

BW-1165FP 11/16"

BW-1166FP 3/4"

BW-1167AFP 13/16"

BW-1167FP 7/8"

BW-1168FP 15/16"

BW-1170FP 1"

Wrench Roll



BW-11P BW-1107MFP 7 mm

BW-1109MFP 9 mm

BW-1110MFP 10 mm

BW-1111MFP 11 mm

BW-1112MFP 12 mm

BW-1113MFP 13 mm

BW-1114MFP 14 mm

BW-1115MFP 15 mm

BW-1117MFP 17 mm

BW-1118MFP 18 mm

BW-1119MFP 19 mm

Wrench Roll



C O M B I N A T I O N S E T S



WR

EN

CH

ES

MADE IN

UUUU SSSS AAAA



9609PNB BW-1156FP 1/4"

BW-1159FP 5/16"

BW-1160FP 3/8"

BW-1161FP 7/16"

BW-1162FP 1/2"

BW-1163FP 9/16"

BW-1164FP 5/8"

BW-1165FP 11/16"

BW-1166FP 3/4"

Wrench Roll



9609MNB BW-1110MFP 10 mm

BW-1111MFP 11 mm

BW-1112MFP 12 mm

BW-1113MFP 13 mm

BW-1114MFP 14 mm

BW-1115MFP 15 mm

BW-1116MFP 16 mm

BW-1117MFP 17 mm

BW-1118MFP 18 mm

Wrench Roll

FULL POLISH COMBINATION WRENCH


BW-1156FP 1/4" 4.0" 0.04 lbs.

BW-1159FP 5/16" 4.5" 0.06 lbs.

BW-1160FP 3/8" 5.1" 0.11 lbs.

BW-1161FP 7/16" 5.7" 0.13 lbs.

BW-1162FP 1/2" 6.1" 0.20 lbs.

BW-1163FP 9/16" 7.1" 0.20 lbs.

BW-1164FP 5/8" 7.9" 0.30 lbs.

BW-1165FP 11/16" 8.7" 0.30 lbs.

BW-1166FP 3/4" 9.6" 0.60 lbs.

BW-1167AFP 13/16" 10.6" 0.60 lbs.

BW-1167FP 7/8" 11.6" 0.65 lbs.

BW-1168FP 15/16" 12.5" 0.70 lbs.

BW-1170FP 1" 13.4" 0.80 lbs.

BW-1171FP 1-1/16" 14.7" 0.90 lbs.

BW-1172FP 1-1/8" 15.5" 1.10 lbs.

BW-1173FP 1-1/4" 16.8" 1.40 lbs.

BW-1174FP 1-5/16" 17.6" 2.10 lbs.

BW-1175FP 1-3/8" 18.5" 2.70 lbs.

BW-1176FP 1-7/16" 19.3" 2.50 lbs.

BW-1177FP 1-1/2" 20.2" 3.40 lbs.

ASME B107.100



WR

EN

CH

ES



C O M B I N A T I O N S E T S & S I N G L E S

FULL POLISH COMBINATION WRENCH – METRIC


BW-1106MFP 6 mm 4.0" 0.04 lbs.

BW-1107MFP 7 mm 4.3" 0.05 lbs.

BW-1108MFP 8 mm 4.5" 0.07 lbs.

BW-1109MFP 9 mm 4.8" 0.09 lbs.

BW-1110MFP 10 mm 5.0" 0.10 lbs.

BW-1111MFP 11 mm 5.8" 0.14 lbs.

BW-1112MFP 12 mm 6.1" 0.14 lbs.

BW-1113MFP 13 mm 6.5" 0.20 lbs.

BW-1114MFP 14 mm 7.1" 0.25 lbs.

BW-1115MFP 15 mm 7.6" 0.29 lbs.

BW-1116MFP 16 mm 8.1" 0.37 lbs.

BW-1117MFP 17 mm 8.7" 0.37 lbs.

BW-1118MFP 18 mm 9.2" 0.45 lbs.

BW-1119MFP 19 mm 9.7" 0.47 lbs.

BW-1120MFP 20 mm 10.2" 0.53 lbs.

BW-1121MFP 21 mm 10.5" 0.65 lbs.

BW-1122MFP 22 mm 11.6" 0.75 lbs.

BW-1124MFP 24 mm 12.5" 0.92 lbs.

BW-1125MFP 25 mm 13.5" 1.05 lbs.

BW-1126MFP 26 mm 13.5" 1.00 lbs.

BW-1127MFP 27 mm 15.0" 1.35 lbs.

BW-1128MFP 28 mm 15.4" 1.53 lbs.

BW-1130MFP 30 mm 15.4" 1.53 lbs.

BW-1132MFP 32 mm 17.0" 2.08 lbs.

ASME B107.100

17 PIECE SATIN FINISH COMBINATION WRENCH SET • Weight: 10.50 lbs.


MF-017 BW-1156 1/4"

BW-1159 5/16"

BW-1160 3/8"

BW-1161 7/16"

BW-1162 1/2"

BW-1163 9/16"

BW-1164 5/8"

BW-1165 11/16"

BW-1166 3/4"

BW-1167A 13/16"

BW-1167 7/8"

BW-1168 15/16"

BW-1170 1"

BW-1171 1-1/16"

BW-1172 1-1/8"

BW-1173 1-1/4"

BW-1174 1-5/16"

Wrench Roll


17 PIECE SATIN FINISH COMBINATION WRENCH SET – METRIC• Weight: 10.50 lbs.


MF-017M BW-1106M 6 mmBW-1107M 7 mmBW-1108M 8 mmBW-1109M 9 mmBW-1110M 10 mmBW-1111M 11 mmBW-1112M 12 mmBW-1113M 13 mmBW-1114M 14 mmBW-1115M 15 mmBW-1116M 16 mmBW-1117M 17 mmBW-1118M 18 mmBW-1119M 19 mmBW-1120M 20 mmBW-1121M 21 mmBW-1122M 22 mmWrench Roll

14 PIECE SATIN FINISH COMBINATION WRENCH SET• Weight: 9.00 lbs.


MF-014 BW-1159 5/16"BW-1160 3/8"BW-1161 7/16"BW-1162 1/2"BW-1163 9/16"BW-1164 5/8"BW-1165 11/16"BW-1166 3/4"BW-1167A 13/16"BW-1167 7/8"BW-1168 15/16"BW-1170 1"BW-1172 1-1/8"BW-1173 1-1/4"Wrench Roll



MF-011 BW-1156 1/4"BW-1160 3/8"BW-1161 7/16"BW-1162 1/2"BW-1163 9/16"BW-1164 5/8"BW-1165 11/16"BW-1166 3/4"BW-1167A 13/16"BW-1167 7/8"BW-1168 15/16"Wrench Roll


WR

EN

CH

ES

MADE IN

UUUU SSSS AAAA



WR

EN

CH

ES



MF-011M BW-1106M 6 mmBW-1107M 7 mmBW-1108M 8 mmBW-1109M 9 mmBW-1110M 10 mmBW-1111M 11 mmBW-1112M 12 mmBW-1113M 13 mmBW-1114M 14 mmBW-1115M 15 mmBW-1116M 16 mmWrench Roll



MF-008 BW-1156 1/4"BW-1159 5/16"BW-1160 3/8"BW-1161 7/16"BW-1162 1/2"BW-1163 9/16"BW-1164 5/8"BW-1166 3/4"Wrench Roll



MF-008M BW-1108M 8 mmBW-1109M 9 mmBW-1110M 10 mmBW-1111M 11 mmBW-1112M 12 mmBW-1114M 14 mmBW-1117M 17 mmBW-1119M 19 mmWrench Roll



MF-006 BW-1160 3/8"BW-1161 7/16"BW-1162 1/2"BW-1163 9/16"BW-1164 5/8"BW-1166 3/4"Wrench Roll



C O M B I N A T I O N S E T S


SATIN FINISH COMBINATION WRENCH–12 POINT


BW-1156 1/4" 4.0" 0.04 lbs.

BW-1159 5/16" 4.4" 0.06 lbs.

BW-1160 3/8" 5.1" 0.11 lbs.

BW-1161 7/16" 5.8" 0.13 lbs.

BW-1162 1/2" 6.4" 0.18 lbs.

BW-1163 9/16" 7.1" 0.25 lbs.

BW-1164 5/8" 7.9" 0.30 lbs.

BW-1165 11/16" 8.8" 0.39 lbs.

BW-1166 3/4" 9.7" 0.47 lbs.

BW-1167A 13/16" 10.6" 0.66 lbs.

BW-1167 7/8" 11.6" 0.78 lbs.

BW-1168 15/16" 12.6" 0.94 lbs.

BW-1170 1" 13.5" 1.02 lbs.

BW-1171 1-1/16" 14.7" 1.29 lbs.

BW-1172 1-1/8" 15.5" 1.57 lbs.

BW-1173 1-1/4" 16.8" 1.91 lbs.

BW-1174 1-5/16" 17.6" 2.61 lbs.

BW-1175 1-3/8" 18.5" 2.63 lbs.

BW-1176 1-7/16" 19.4" 3.45 lbs.

BW-1177 1-1/2" 20.3" 3.43 lbs.

ASME B107.100

SATIN FINISH COMBINATION WRENCH–12 POINT – METRIC


BW-1106M 6 mm 4.0" 0.04 lbs.

BW-1107M 7 mm 4.2" 0.05 lbs.

BW-1108M 8 mm 4.4" 0.07 lbs.

BW-1109M 9 mm 4.8" 0.09 lbs.

BW-1110M 10 mm 5.1" 0.10 lbs.

BW-1111M 11 mm 5.8" 0.14 lbs.

BW-1112M 12 mm 6.1" 0.14 lbs.

BW-1113M 13 mm 6.4" 0.20 lbs.

BW-1114M 14 mm 7.1" 0.25 lbs.

BW-1115M 15 mm 7.5" 0.29 lbs.

BW-1116M 16 mm 7.9" 0.37 lbs.

BW-1117M 17 mm 8.8" 0.37 lbs.

BW-1118M 18 mm 9.2" 0.45 lbs.

BW-1119M 19 mm 9.7" 0.47 lbs.

BW-1120M 20 mm 10.1" 0.53 lbs.

BW-1121M 21 mm 10.6" 0.65 lbs.

BW-1122M 22 mm 11.6" 0.75 lbs.

BW-1124M 24 mm 12.6" 0.92 lbs.

BW-1125M 25 mm 13.5" 1.05 lbs.

BW-1126M 26 mm 13.5" 1.00 lbs.

BW-1127M 27 mm 14.7" 1.35 lbs.

BW-1128M 28 mm 15.5" 1.53 lbs.

BW-1130M 30 mm 15.5" 1.53 lbs.

BW-1132M 32 mm 16.8" 2.08 lbs.

ASME B107.100


WR

EN

CH

ES

MADE IN

UUUU SSSS AAAA



WR

EN

CH

ES

14 PIECE BLACK FINISH COMBINATION WRENCH SET • Weight: 11.00 lbs.


BL-014 BW-1160B 3/8"

BW-1161B 7/16"

BW-1162B 1/2"

BW-1163B 9/16"

BW-1164B 5/8"

BW-1165B 11/16"

BW-1166B 3/4"

BW-1167AB 13/16"

BW-1167B 7/8"

BW-1168B 15/16"

BW-1170B 1"

BW-1171B 1-1/16"

BW-1172B 1-1/8"

BW-1173B 1-1/4"

Wrench Roll

14 PIECE BLACK FINISH COMBINATION WRENCH SET – METRIC• Weight: 11.00 lbs.


BL-014M BW-1107MB 7 mm

BW-1108MB 8 mm

BW-1109MB 9 mm

BW-1110MB 10 mm

BW-1111MB 11 mm

BW-1112MB 12 mm

BW-1113MB 13 mm

BW-1114MB 14 mm

BW-1115MB 15 mm

BW-1116MB 16 mm

BW-1117MB 17 mm

BW-1118MB 18 mm

BW-1119MB 19 mm

BW-1120MB 20 mm

Wrench Roll

9 PIECE BLACK FINISH COMBINATION WRENCH SET • Weight: 1.90 lbs.


BL-009 BW-1156B 1/4"

BW-1159B 5/16"

BW-1160B 3/8"

BW-1161B 7/16"

BW-1162B 1/2"

BW-1163B 9/16"

BW-1164B 5/8"

BW-1165B 11/16"

BW-1166B 3/4"

Wrench Roll







BL-009M BW-1110MB 10 mm

BW-1111MB 11 mm

BW-1112MB 12 mm

BW-1113MB 13 mm

BW-1114MB 14 mm

BW-1115MB 15 mm

BW-1116MB 16 mm

BW-1117MB 17 mm

BW-1118MB 18 mm

Wrench Roll

6 PIECE BLACK FINISH COMBINATION WRENCH SET• Weight: 1.00 lbs.


BL-006 BW-1160B 3/8"

BW-1161B 7/16"

BW-1162B 1/2"

BW-1163B 9/16"

BW-1164B 5/8"

BW-1166B 3/4"

Wrench Roll



BL-006M BW-1110MB 10 mm

BW-1111MB 11 mm

BW-1112MB 12 mm

BW-1113MB 13 mm

BW-1117MB 17 mm

BW-1118MB 18 mm

Wrench Roll


WR

EN

CH

ES

MADE IN

UUUU SSSS AAAA



WR

EN

CH

ES




BLACK FINISH COMBINATION WRENCH


BW-1156B 1/4" 4.0" 0.04 lbs.

BW-1159B 5/16" 4.4" 0.06 lbs.

BW-1160B 3/8" 5.1" 0.11 lbs.

BW-1161B 7/16" 5.8" 0.13 lbs.

BW-1162B 1/2" 6.4" 0.18 lbs.

BW-1163B 9/16" 7.1" 0.25 lbs.

BW-1164B 5/8" 7.9" 0.30 lbs.

BW-1165B 11/16" 8.8" 0.39 lbs.

BW-1166B 3/4" 9.7" 0.47 lbs.

BW-1167AB 13/16" 10.6" 0.66 lbs.

BW-1167B 7/8" 11.6" 0.78 lbs.

BW-1168B 15/16" 12.6" 0.94 lbs.

BW-1170B 1" 13.5" 1.02 lbs.

BW-1171B 1-1/16" 14.7" 1.29 lbs.

BW-1172B 1-1/8" 15.5" 1.57 lbs.

BW-1173B 1-1/4" 16.8" 1.91 lbs.

BW-1174B 1-5/16" 17.6" 2.61 lbs.

BW-1175B 1-3/8" 18.5" 2.63 lbs.

BW-1176B 1-7/16" 19.4" 3.45 lbs.

BW-1177B 1-1/2" 20.3" 3.43 lbs.

ASME B107.100

BLACK FINISH COMBINATION WRENCH – METRIC


BW-1106MB 6 mm 4.0" 0.04 lbs.

BW-1107MB 7 mm 4.2" 0.05 lbs.

BW-1108MB 8 mm 4.4" 0.07 lbs.

BW-1109MB 9 mm 4.8" 0.09 lbs.

BW-1110MB 10 mm 5.1" 0.10 lbs.

BW-1111MB 11 mm 5.8" 0.14 lbs.

BW-1112MB 12 mm 6.1" 0.14 lbs.

BW-1113MB 13 mm 6.4" 0.20 lbs.

BW-1114MB 14 mm 7.1" 0.25 lbs.

BW-1115MB 15 mm 7.5" 0.29 lbs.

BW-1116MB 16 mm 7.9" 0.37 lbs.

BW-1117MB 17 mm 8.8" 0.37 lbs.

BW-1118MB 18 mm 9.2" 0.45 lbs.

BW-1119MB 19 mm 9.7" 0.47 lbs.

BW-1120MB 20 mm 10.1" 0.53 lbs.

BW-1121MB 21 mm 10.6" 0.65 lbs.

BW-1122MB 22 mm 11.6" 0.75 lbs.

BW-1124MB 24 mm 12.6" 0.92 lbs.

BW-1125MB 25 mm 13.5" 1.05 lbs.

BW-1126MB 26 mm 13.5" 1.00 lbs.

BW-1127MB 27 mm 14.7" 1.35 lbs.

BW-1128MB 28 mm 15.5" 1.53 lbs.

BW-1130MB 30 mm 15.5" 1.53 lbs.

BW-1132MB 32 mm 16.8" 2.08 lbs.

ASME B107.100



WR

EN

CH

ES

8 PIECE OPEN END WRENCH SET• Weight: 2.16 lbs.• Full Polished Finish


BW-108PNB 4020P 1/4" X 5/16"

4723P 3/8" X 7/16"

4724P 7/16" X 1/2"

4725P 1/2" X 9/16"

4727P 5/8" X 11/16"

4728P 11/16" X 3/4"

4732P 13/16" X 7/8"

4033P 15/16" X 1"

Wrench Roll

8 PIECE OPEN END WRENCH SET – METRIC• Weight: 2.16 lbs.• Full Polished Finish


BW-108MNB BWE-67MP 6 X 7 mm

BWE-89MP 8 X 9 mm

BWE-1011MP 10 X 11 mm

BWE-1213MP 12 X 13 mm

BWE-1415MP 14 X 15 mm

BWE-1617MP 16 X 17 mm

BWE-1819MP 18 X 19 mm

BWE-2022MP 20 X 22 mm

Wrench Roll

OPEN END WRENCH• Full Polished Finish


4020P 1/4" X 5/16" 4.5" 0.04 lbs.

4723P 3/8" X 7/16" 5.8" 0.09 lbs.

4724P 7/16" X 1/2" 6.4" 0.13 lbs.

4725P 1/2" X 9/16" 7.0" 0.18 lbs.

4727P 5/8" X 11/16" 8.3" 0.33 lbs.

4728P 11/16" X 3/4" 8.9" 0.46 lbs.

4732P 13/16" X 7/8" 10.1" 0.56 lbs.

4033P 15/16" X 1" 11.4" 0.85 lbs.

ASME B107.100

OPEN END WRENCH – METRIC• Full Polished Finish


BWE-67MP 6 X 7 mm 4.5" 0.04 lbs.

BWE-89MP 8 X 9 mm 5.1" 0.06 lbs.

BWE-1011MP 10 X 11 mm 5.8" 0.10 lbs.

BWE-1213MP 12 X 13 mm 6.4" 0.14 lbs.

BWE-1415MP 14 X 15 mm 7.6" 0.28 lbs.

BWE-1617MP 16 X 17 mm 8.3" 0.37 lbs.

BWE-1819MP 18 X 19 mm 8.9" 0.50 lbs.

BWE-2022MP 20 X 22 mm 9.5" 0.77 lbs.

ASME B107.100



WR

EN

CH

ES



O P E N E N D , I G N I T I O N & B O X

10 PIECE OPEN END IGNITION WRENCH SET • Weight: 1.90 lbs.• Satin Finish


EW-40NB 3114 13/64" X 15/64"

3116 7/32" X 1/4"

3118 15/64" X 13/64"

3120 1/4" X 7/32"

3122 17/64" X 19/64"

3124 9/32" X 5/16"

3128 5/16" X 9/32"

3130 11/32" X 3/8"

3132 3/8" X 11/32"

3134 7/16" X 1/2"

Wrench Roll

OPEN END IGNITION WRENCHES• Satin Finish


3114 13/64 X 15/64" 3.2" 0.20 lbs.

3116 7/32 X 1/4" 3.2" 0.25 lbs.

3118 15/64 X 13/64" 3.2" 0.40 lbs.

3120 1/4 X 7/32" 4.5" 0.56 lbs.

3122 17/64 X 19/64" 4.7" 0.75 lbs.

3124 9/32 X 5/16" 5.0" 1.00 lbs.

3128 5/16 X 9/32" 5.2" 1.25 lbs.

3130 11/32 X 3/8" 5.5" 1.50 lbs.

3132 3/8 X 11/32" 5.7" 1.75 lbs.

3134 7/16 X 1/2" 6.0" 2.00 lbs.

Wrench Roll

ASME B107.100

6 PIECE LONG BOX END WRENCH SET• Weight: 3.36 lbs.• Full Polished Finish


BW-6PTNB BWS-1202P 5/16" X 3/8"

BWS-1206P 7/16" X 1/2"

BWS-1211P 9/16" X 5/8"

BWS-1214P 11/16" X 3/4"

BWS-1216P 13/16" X 7/8"

BWS-1218P 15/16" X 1"

Wrench Roll



WR

EN

CH

ES

LONG BOX END WRENCH• Full Polished Finish


BWS-1202P 5/16" X 3/8" 7.0" 0.10 lbs.

BWS-1206P 7/16" X 1/2" 8.1" 0.18 lbs.

BWS-1210P 1/2" X 9/16" 8.0" 0.22 lbs.

BWS-1211P 9/16" X 5/8" 9.5" 0.36 lbs.

BWS-1214P 11/16" X 3/4" 11.1" 0.48 lbs.

BWS-1216P 13/16" X 7/8" 13.0" 0.67 lbs.

BWS-1218P 15/16" X 1" 15.1" 1.08 lbs.

ASME B107.100

8 PIECE FLARE NUT WRENCH SET – STANDARD AND METRIC• Weight: 2.28 lbs.• Full Polished Finish


FN-8PTNB FN-1402P 3/8" X 7/16"

FN-1404P 1/2" X 9/16"

FN-1406P 5/8" X 11/16"

FN-1410P 3/4" X 1"

FN-1012MP 10 mm X 12 mm

FN-1314MP 13 mm X 14 mm

FN-1517MP 15 mm X 17 mm

FN-1921MP 19 mm X 21 mm

4 PIECE FLARE NUT WRENCH SET• Weight: 1.11 lbs.• Full Polished Finish


FN-4PTNB FN-1402P 3/8" X 7/16"

FN-1404P 1/2" X 9/16"

FN-1406P 5/8" X 11/16"

FN-1410P 3/4" X 1"

4 PIECE FLARE NUT WRENCH SET – METRIC• Weight: 1.11 lbs.• Full Polished Finish


FN-4MNB FN-1012MP 10 mm X 12 mm

FN-1314MP 13 mm X 14 mm

FN-1517MP 15 mm X 17 mm

FN-1921MP 19 mm X 21 mm



WR

EN

CH

ES



B O X , F L A R E N U T & M I S C .

FLARE NUT WRENCH• Full Polished Finish


FN-1402P 3/8" X 7/16" 6.3" 0.17 lbs.

FN-1404P 1/2" X 9/16" 7.5" 0.26 lbs.

FN-1406P 5/8" X 11/16" 8.8" 0.41 lbs.

FN-1410P 3/4" X 1" 9.2" 0.50 lbs.

ASME B107.100

FLARE NUT WRENCH – METRIC• Full Polished Finish


FN-911MP 9 X 11 mm 6.3" 0.12 lbs.

FN-1012MP 10 X 12 mm 6.9" 0.22 lbs.

FN-1314MP 13 X 14 mm 7.5" 0.26 lbs.

FN-1517MP 15 X17 mm 8.1" 0.32 lbs.

FN-1921MP 19 X 21 mm 8.8" 0.49 lbs.

ASME B107.100

AIR CONDITIONING WRENCH


ZW-1045A-A 1/4" and 3/16" Square Ratchet 0.33 lbs.

1/2" and 9/16" Hex End

ADJUSTABLE WRENCH


AW-1004-1 4" 4.3" 0.14 lbs.

AW-1006-1 6" 6.2" 0.29 lbs.

AW-1008-1 8" 8.3" 0.58 lbs.

AW-1010-1 10" 10.2" 1.11 lbs.

AW-1012-1 12" 12.3" 1.73 lbs.

AW-1015-1 15" 15" 2.85 lbs.

ASME B107.8M

UNIVERSAL CHAIN WRENCH


AW-1351 13.2" 1.85 lbs.



WR

EN

CH

ES

T O R Q U E W R E N C H E S

RATCHETING MICROMETER ADJUSTABLE TORQUE WRENCHES• Desired torque value is pre-selected by use of a micrometer type scale. • When exact torque level is reached, wrench releases with an audible “click.” • Wrench resets automatically to same torque setting. • Ball bearing-mounted release mechanism eliminates accuracy variations between slow and fast loading. • Color-coded English and Metric markings. • Positive locking mechanism helps prevent accidental changes in torque values. • Comfortable, secure ergonomically designed grip.

Torque Range Increments

Item No. Foot Lbs Newton Meters Drive Size Foot Lbs Newton Meters Length Width Height Weight

39825-A 20-250* 3.61-29.03 3/8 " 1.0* .11 13.4 " 1.6 " 1.4 " 1.89 lbs

34870-A 10-100 16.9-138.9 3/8 " .5 .6 18.0 " 1.6 " 1.4 " 2.56 lbs

49859-A 20-150 33.9-210.1 1/2 " 1.0 1.4 20.8 " 1.6 " 1.6 " 2.96 lbs

49860A 25-250 43.4-384.4 1/2 " 1.0 1.4 20.8 " 1.6 " 1.7 " 3.84 lbs

49860ARK Repair Kit for 49860AASME B107.14M

* Measured in Inch lbs

BEAM TYPE TORQUE WRENCHES• Compact head design permits use in tight spots. • Torque scale reads in both English and Metric graduations. • Torques both right and left.

Torque Range

Item No. Inch Lbs Newton Meters Drive Size Length Weight

34835 0-800 0-90 3/8 " 13-1/2 " .83

49830 0-150 (ft/lbs) 0-200 1/2 " 16-3/8 " 1.44ASME B107.14M


RATCHETING WRENCHES.

The Blackhawk™ by Proto® line of ratcheting wrenches features a variety of sizes, lengths and head configurations to

meet most job requirements. Blackhawk™ by Proto® ratcheting wrenches help increase productivity by combining the

convenient light weight and thin profile of a combination wrench with the ease of use of a ratchet and socket..

06.Ratcheting Wrenches.qxd 6/24/05 1:42 PM Page 137


RA

TC

HE

TIN

GW

RE

NC

HE

S

7 PIECE HIGH ACCESS RATCHETING WRENCH SET• Weight: 3.00 lbs.


BW-1250 BW-1210 3/8"

BW-1212 7/16"

BW-1214 1/2"

BW-1216 9/16"

BW-1218 5/8"

BW-1220 11/16"

BW-1222 3/4"

7 PIECE HIGH ACCESS RATCHETING WRENCH SET – METRIC• Weight: 3.00 lbs.


BW-1251 BW-1260 10 mm

BW-1261 12 mm

BW-1262 13 mm

BW-1263 14 mm

BW-1264 15 mm

BW-1265 16 mm

BW-1267 18 mm

HIGH ACCESS RATCHETING WRENCH


BW-1210 3/8" 5.0" 0.12 lbs.

BW-1212 7/16" 5.6" 0.17 lbs.

BW-1214 1/2" 6.4" 0.21 lbs.

BW-1216 9/16" 7.0" 0.31 lbs.

BW-1218 5/8" 7.9" 0.36 lbs.

BW-1220 11/16" 8.7" 0.46 lbs.

BW-1222 3/4" 9.7" 0.57 lbs.

HIGH ACCESS RATCHETING WRENCH – METRIC


BW-1258 8 mm 4.0" 0.09 lbs.

BW-1259 9 mm 4.5" 0.09 lbs.

BW-1260 10 mm 5.0" 0.13 lbs.

BW-12605 11 mm 5.7" 0.17 lbs.

BW-1261 12 mm 6.0" 0.19 lbs.

BW-1262 13 mm 6.4" 0.21 lbs.

BW-1263 14 mm 7.1" 0.30 lbs.

BW-1264 15 mm 7.5" 0.33 lbs.

BW-1265 16 mm 7.8" 0.37 lbs.

BW-1266 17 mm 8.9" 0.46 lbs.

BW-1267 18 mm 9.2" 0.49 lbs.

BW-1268 19 mm 9.75" 0.55 lbs.



RA

TC

HE

TIN

GW

RE

NC

HE

S



H I G H A C C E S S & R E V E R S I B L E R A T C H E T I N G

12 PIECE REVERSIBLE RATCHETING WRENCH SET – METRIC• Weight: 4.19 lbs.

8 PIECE REVERSIBLE RATCHETING WRENCH SET• Weight: 2.44 lbs.


BW-1400 BW-1410 5/16"BW-1412 3/8"BW-1414 7/16"BW-1416 1/2"BW-1418 9/16"BW-1420 5/8"BW-1422 11/16"BW-1424 3/4"

8 PIECE REVERSIBLE RATCHETING WRENCH SET – METRIC• Weight: 2.44 lbs.


BW-1408 BW-1458 8 mmBW-1460 10 mmBW-1462 12 mmBW-1463 13 mmBW-1464 14 mmBW-1465 15 mmBW-1467 17 mmBW-1468 18 mm

REVERSE RATCHETING BOX WRENCH


BW-1403 7/32" 5.0" 0.13 lbs.BW-1405 1/4" 5.0" 0.13 lbs.BW-1410 5/16" 5.0" 0.13 lbs.BW-1412 3/8" 5.25" 0.15 lbs.BW-1414 7/16" 5.5" 0.16 lbs.BW-1416 1/2" 5.75" 0.17 lbs.BW-1418 9/16" 6.0" 0.19 lbs.BW-1420 5/8" 6.25" 0.20 lbs.BW-1422 11/16" 6.5" 0.22 lbs.BW-1424 3/4" 6.75" 0.26 lbs.

Contents SizeBW-1464 14 mmBW-1465 15 mmBW-1466 16 mmBW-1467 17 mmBW-1468 18 mmBW-1469 19 mm

REVERSIBLE RATCHETING WRENCHRatcheting box end. Thin head / slim shank as well as a short arc swing. Fine-toothed gears for smooth ratcheting. Ratcheting wrench-head angled for easy knuckle clearance. One-finger reverse lever for quick-change ratcheting direction. Same-sized open-end. Full-polish.

Item No. Contents SizeBW-1450 BW-1458 8 mm

BW-1459 9 mmBW-1460 10 mmBW-1461 11 mmBW-1462 12 mmBW-1463 13 mm



RA

TC

HE

TIN

GW

RE

NC

HE

S

REVERSE RATCHETING BOX WRENCH – METRIC


BW-1458 8 mm 5.50" 0.16 lbs.

BW-1459 9 mm 5.875" 0.18 lbs.

BW-1460 10 mm 6.25" 0.20 lbs.

BW-1461 11 mm 6.50" 0.22 lbs.

BW-1462 12 mm 6.75" 0.26 lbs.

BW-1463 13 mm 7.0" 0.30 lbs.

BW-1464 14 mm 7.50" 0.33 lbs.

BW-1465 15 mm 8.0" 0.43 lbs.

BW-1466 16 mm 8.25" 0.47 lbs.

BW-1467 17 mm 8.75" 0.49 lbs.

BW-1468 18 mm 9.375" 0.51 lbs.

BW-1469 19 mm 9.75" 0.55 lbs.

7 PIECE JUMBO REVERSIBLE WRENCH SET• Weight: 11.98 lbs.

7 PIECE JUMBO REVERSIBLE WRENCH SET – METRIC• Weight: 10.43 lbs.

JUMBO REVERSIBLE WRENCH


BW-1426 13/16" 11.4" 0.70 lbs.

BW-1428 7/8" 11.4" 0.83 lbs.

BW-1430 15/16" 12.7" 0.95 lbs.

BW-1432 1" 12.7" 1.15 lbs.

BW-1434 1-1/16" 14.1" 1.43 lbs.

BW-1436 1-1/8" 15.9" 1.68 lbs.

BW-1438 1-1/4" 16.7" 2.22 lbs.

JUMBO REVERSIBLE WRENCH – METRIC


BW-1471 21 mm 11.4" 0.70 lbs.

BW-1472 22 mm 11.4" 0.83 lbs.

BW-1474 24 mm 12.7" 0.95 lbs.

BW-1477 27 mm 14.1" 1.43 lbs.

BW-1480 30 mm 15.9" 1.95 lbs.

BW-1482 32 mm 16.7" 2.22 lbs.

BW-1484 34 mm 18.1" 2.48 lbs.

Contents SizeBW-1434 1-1/16"BW-1436 1-1/8"BW-1438 1-1/4"

Item No. Contents SizeBW-1401 BW-1426 13/16"

BW-1428 7/8"BW-1430 15/16"BW-1432 1"

Contents SizeBW-1480 30 mmBW-1482 32 mmBW-1484 34 mm

Item No. Contents SizeBW-1451 BW-1471 21 mm

BW-1472 22 mmBW-1474 24 mmBW-1477 27 mm



RA

TC

HE

TIN

GW

RE

NC

HE

S



R E V E R S I B L E R A T C H E T I N G & S T U B B Y

9 PIECE STUBBY REVERSIBLE RATCHETING WRENCH SET • Weight: 2.20 lbs.

13 PIECE STUBBY REVERSIBLE RATCHETING WRENCH SET – METRIC• Weight: 3.43 lbs.

STUBBY REVERSIBLE RATCHETING WRENCH


BW-2206R 1/4" 3.1" 0.06 lbs.

BW-2208R 5/16" 3.5" 0.08 lbs.

BW-2210R 3/8" 3.8" 0.11 lbs.

BW-2212R 7/16" 4.0" 0.12 lbs.

BW-2214R 1/2" 4.4" 0.16 lbs.

BW-2216R 9/16" 4.5" 0.18 lbs.

BW-2218R 5/8" 4.8" 0.24 lbs.

BW-2220R 11/16" 5.0" 0.27 lbs.

BW-2222R 3/4" 5.3" 0.36 lbs.

STUBBY REVERSIBLE RATCHETING WRENCH – METRIC


BW-2276R 6 mm 3.1" 0.06 lbs.BW-2278R 8 mm 3.5" 0.08 lbs.BW-2279R 9 mm 3.7" 0.09 lbs.BW-2260R 10 mm 3.8" 0.10 lbs.BW-2261R 11 mm 4.1" 0.14 lbs.BW-2262R 12 mm 4.3" 0.15 lbs.BW-2263R 13 mm 4.4" 0.18 lbs.BW-2264R 14 mm 4.5" 0.21 lbs.BW-2265R 15 mm 4.8" 0.24 lbs.BW-2266R 16 mm 5.1" 0.33 lbs.BW-2267R 17 mm 5.0" 0.38 lbs.BW-2268R 18 mm 5.2" 0.41 lbs.BW-2269R 19 mm 5.5" 0.47 lbs.

STUBBY REVERSIBLE RATCHETING WRENCHRatcheting box end. Thin head / slim, short ‘stubby’ shank as well as a short arc swing. Fine-toothed gears for smooth ratcheting. Ratcheting wrench-head angled for easy knuckle clearance. One-finger reverse lever for quick-change ratcheting direction. Same-sized open-end. Full-polish. Sets come in sturdy metal storage cases with molded wrench inserts and parts storage trays.

Contents SizeBW-2216R 9/16"BW-2218R 5/8"BW-2220R 11/16"BW-2222R 3/4"

Item No. Contents SizeBW-2250R BW-2206R 1/4"

BW-2208R 5/16"BW-2210R 3/8"BW-2212R 7/16"BW-2214R 1/2"

Contents SizeBW-2264R 14 mmBW-2265R 15 mmBW-2266R 16 mmBW-2267R 17 mmBW-2268R 18 mmBW-2269R 19 mm

Item No. Contents SizeBW-2251R BW-2276R 6 mm

BW-2278R 8 mmBW-2279R 9 mmBW-2260R 10 mmBW-2261R 11 mmBW-2262R 12 mmBW-2263R 13 mm



RA

TC

HE

TIN

GW

RE

NC

HE

S

8 PIECE LOCKING FLEX-HEAD RATCHETING WRENCH SET• Weight: 4.35 lbs.

12 PIECE LOCKING FLEX RATCHETING BOX WRENCH SET – METRIC• Weight: 5.34 lbs.

LOCKING FLEX-HEAD RATCHETING WRENCHES


BW-3209L 5/16" 5.0" 0.16 lbs.

BW-3210L 3/8" 5.4" 0.17 lbs.

BW-3212L 7/16" 5.6" 0.19 lbs.

BW-3214L 1/2" 6.1" 0.20 lbs.

BW-3216L 9/16" 6.3" 0.29 lbs.

BW-3218L 5/8" 7.0" 0.33 lbs.

BW-3220L 11/16" 7.5" 0.46 lbs.

BW-3222L 3/4" 8.5" 0.57 lbs.

LOCKING FLEX-HEAD RATCHETING WRENCHES – METRIC


BW-3258L 8 mm 5.0" 0.13 lbs.

BW-3259L 9 mm 5.2" 0.16 lbs.

BW-3260L 10 mm 5.4" 0.16 lbs.

BW-3260AL 11 mm 5.6" 0.17 lbs.

BW-3261L 12 mm 5.8" 0.19 lbs.

BW-3262L 13 mm 6.1" 0.19 lbs.

BW-3263L 14 mm 6.3" 0.21 lbs.

BW-3264L 15 mm 6.7" 0.25 lbs.

BW-3265L 16 mm 7.0" 0.30 lbs.

BW-3266L 17 mm 7.3" 0.33 lbs.

BW-3267L 18 mm 8.0" 0.36 lbs.

BW-3268L 19 mm 8.5" 0.45 lbs.

LOCKING FLEX-HEAD RATCHETING WRENCHAdjustable ratcheting flex-head box end with locking gradations allows for locking the ratcheting head at the desired angle in tightspaces. Thumb pressure, push-button release locking mechanism. Thin head / slim shank as well as a short arc swing. Fine-toothedgears for smooth ratcheting. Same-sized open-end. Full-polish. Sets come in sturdy metal storage cases with molded wrench insertsand parts storage trays.

Contents SizeBW-3216L 9/16"BW-3218L 5/8"BW-3220L 11/16"BW-3222L 3/4"

Item No. Contents SizeBW-3251L BW-3209L 5/16"

BW-3210L 3/8"BW-3212L 7/16"BW-3214L 1/2"

Contents SizeBW-3263L 14 mmBW-3264L 15 mmBW-3265L 16 mmBW-3266L 17 mmBW-3267L 18 mmBW-3268L 19 mm

Item No. Contents SizeBW-3250L BW-3258L 8 mm

BW-3259L 9 mmBW-3260L 10 mmBW-3260AL 11 mmBW-3261L 12 mmBW-3262L 13 mm



RA

TC

HE

TIN

GW

RE

NC

HE

S



S T U B B Y & L O C K I N G F L E X - H E A D

4 PIECE REVERSIBLE DOUBLE BOX WRENCH SET• Weight: 3.49 lbs.


BW-3330R BW-0516R 5/16" X 3/8"

BW-0716R 7/16" X 1/2"

BW-0916R 9/16" X 5/8"

BW-1116R 11/16" X 3/4"

6 PIECE REVERSIBLE DOUBLE BOX WRENCH SET – METRIC• Weight: 4.02 lbs.


BW-3332R BW-0809R 8 X 9 mm

BW-1011R 10 X 11 mm

BW-1213R 12 X 13 mm

BW-1415R 14 X 15 mm

BW-1618R 16 X 18 mm

BW-1719R 17 X 19 mm

REVERSIBLE DOUBLE BOX WRENCH


BW-0516R 5/16" X 3/8" 5.0" 0.12 lbs.

BW-0716R 7/16" X 1/2" 6.7" 0.26 lbs.

BW-0916R 9/16" X 5/8" 7.5" 0.33 lbs.

BW-1116R 11/16" X 3/4" 9.1" 0.49 lbs.

REVERSIBLE DOUBLE BOX WRENCH – METRIC


BW-0809R 8 X 9 mm 5.0" 0.12 lbs.

BW-1011R 10 X 11 mm 5.9" 0.19 lbs.

BW-1213R 12 X 13 mm 6.7" 0.26 lbs.

BW-1415R 14 X 15 mm 7.5" 0.33 lbs.

BW-1618R 16 X 18 mm 8.3" 0.40 lbs.

BW-1719R 17 X 19 mm 9.1" 0.49 lbs.

REVERSIBLE RATCHETING DOUBLE BOX WRENCHTwin ratcheting box ends. Thin head / slim shank as well as a short arc swing. Fine-toothed gears for smooth ratcheting. Ratchetingwrench-head angled for easy knuckle clearance on both ends. One-finger reverse lever for quick-change ratcheting direction. Full-polish. Sets come in sturdy metal storage case with molded wrench inserts and parts storage trays.



RA

TC

HE

TIN

GW

RE

NC

HE

S

4 PIECE STANDARD DOUBLE-BOX E-TORX®

RATCHETING WRENCH SET • Weight: 3.53 lbs.


BW-1300T BW-0608T E6 X E8

BW-1012T E10 X E12

BW-1418T E14 X E18

BW-2024T E20 X E24

STANDARD DOUBLE-BOX E-TORX® RATCHETING WRENCH


BW-0608T E6 X E8 5.0" 0.12 lbs.

BW-1012T E10 X E12 5.9" 0.19 lbs.

BW-1418T E14 X E18 7.5" 0.33 lbs.

BW-2024T E20 X E24 9.1" 0.49 lbs.

8 PIECE RATCHET AND SOCKET SET• Weight: 0.26 lbs.

Item No. Contents Size Length

BW-0308RBS Ratcheting Box End Handle 1/4" & 5/16" 5"

Phillips® #1 1/4" Shank



Slotted 5/32" 1/4" Shank



DOUBLE-BOX E-TORX® RATCHETING WRENCHESTwin ratcheting box ends. Thin head / slim shank as well as a short arc swing. Fine-toothed gears for smooth ratcheting. Full-polish.Sets come in sturdy metal storage cases with molded wrench inserts and parts storage trays.

RATCHET AND SOCKET SETShort arc swing with fine-toothed gears for smooth ratcheting. Slim head profile design coupled with a tight gearing system to use insmall space. Quick-disk on drive head for easy fastener removal.

PHILLIPS® is a registered trademark of Phillips Screw Co.TORX® is a registered trademark of Textron, Inc. d/b/a The Camcar Screw & Mfg. Company


SCREWDRIVERS, NUTDRIVERS,

HEX KEYS & BITS.JUST THE RIGHT MIX.

The BlackhawkTM by Proto® line of tools includes a core assortment of drivers, bits and keys to handle most fastener

turning operations in automotive and light-industrial applications. BlackhawkTM by Proto® screwdrivers have clear

extruded handles which help reduce stress and fracture potential, and hold up to common solvents and chemicals

found in automotive and industrial facilities. Handles are large and four-sided for increased torque and easy turning.

Precision-formed alloy steel bars are heat-treated and nickel-chrome plated to provide wear resistance with

excellent torque and bend strength. The narrow blade slotted drivers feature serrated tips that provide additional

bite on slotted fasteners. Cold formed Phillips® drivers provide for better screwdriver-to-fastener fit.

screwdrivers.qxd 6/24/05 1:44 PM Page 145


SC

REW

DR

IVER

S, N

UT

DR

IVER

S, H

EXK

EYS

& B

ITS


7 PIECE TORX® SCREWDRIVER SET• Weight: 1.40 lbs.

Item No. Contents Description Tip Blade Length Blade Shank

ST-127S ST-608S Torx® 8 3.3"

ST-610S Torx® 10 3.3"

ST-615S Torx® 15 3.3"

ST-620S Torx® 20 3.3"

ST-625S Torx® 25 3.3"

ST-627S Torx® 27 4.0"

ST-630S Torx® 30 4.0"

Pouch

7 PIECE COMBINATION SCREWDRIVER SET• Weight: 2.16 lbs.


ST-107S ST-1004S Slotted 1/4" 4.0"

ST-1006S Slotted 5/16" 6.0"

ST-1008S Slotted 3/8" 8.0"

ST-1081S Phillips® 1 Pt. 3.0"


ST-1140S Phillips® Stubby 2 Pt. 1.5"

ST-1145S Slotted Stubby 1/4" 1.5"

Pouch

5 PIECE PHILLIPS® SCREWDRIVER SET• Weight: 1.79 lbs.


ST-105S ST-1140S Phillips® Stubby 2 Pt. 1.5"





Pouch

5 PIECE SLOTTED SCREWDRIVER SET• Weight: 1.76 lbs.


ST-106S ST-1024S Slotted Square Shank 1/4" 4.0"

ST-1026S Slotted Square Shank 5/16" 6.0"

ST-1028S Slotted Square Shank 3/8" 8.0"

ST-1145S Slotted Stubby 1/4" 1.5"

ST-1150S Slotted Pocket Size 1/8" 2.0"

Pouch


S C R E W D R I V E R S


SC

REW

DR

IVER

S, NU

TD

RIV

ERS, H

EXK

EYS

& B

ITS



4 PIECE COMBINATION SCREWDRIVER SET• Weight: 1.28 lbs.


ST-104S ST-1004S Slotted 1/4" 4.0"

ST-1006S Slotted 5/16" 6.0"



Pouch

SLOTTED SCREWDRIVERS

Item No. Tip Blade Length Blade Shank Weight

ST-1004S 1/4" 4.0" 0.23 lbs.

ST-1006S 5/16" 6.0" 0.39 lbs.

ST-1008S 3/8" 8.0" 0.53 lbs.

ST-1010S 3/8" 10.0" 0.84 lbs.

ASME B107.15

SLOTTED SQUARE SHANK SCREWDRIVERS


ST-1024S 1/4" 4.0" 0.25 lbs.

ST-1026S 5/16" 6.0" 0.43 lbs.

ST-1028S 3/8" 8.0" 0.66 lbs.

ST-1032S 3/8" 10.0" 0.97 lbs.

ASME B107.15

SLOTTED ELECTRICIAN’S SCREWDRIVERS


ST-1043S 3/16" 3.0" 0.15 lbs.

ST-1046S 3/16" 6.0" 0.18 lbs.

ST-1048S 3/16" 10.0" 0.19 lbs.

ASME B107.15

SLOTTED STUBBY SCREWDRIVER


ST-1145S 1/4" 1.5" 0.10 lbs.

ASME B107.15

POCKET SCREWDRIVER

Item No. Description Tip Blade Length Blade Shank Weight

ST-1150S Slotted 1/8" 2.0" 0.03 lbs.

ST-1151S Phillips® 0 Pt. 2.0" 0.03 lbs.

ASME B107.15

PHILLIPS® SCREWDRIVERS


ST-1081S 1 Pt. 3.0" 0.15 lbs.

ST-1082S 2 Pt. 4.0" 0.23 lbs.

ST-1083S 3 Pt. 6.0" 0.38 lbs.

ST-1084S 2 Pt. 10.0" 0.51 lbs.

ASME B107.30

PHILLIPS® STUBBY SCREWDRIVER


ST-1140S 2 Pt. 1.5" 0.10 lbs.

ASME B107.30



SC

REW

DR

IVER

S, N

UT

DR

IVER

S, H

EXK

EYS

& B

ITS


TORX® SCREWDRIVERS

Item No. Tip Blade Length Blade Shank WeightST-608S 8 3.3" 0.05 lbs.ST-610S 10 3.3" 0.15 lbs.ST-615S 15 3.3" 0.13 lbs.ST-620S 20 3.3" 0.14 lbs.ST-625S 25 3.3" 0.16 lbs.ST-627S 27 4.0" 0.25 lbs.ST-630S 30 4.0" 0.26 lbs.

SPARK DETECTOR SCREWDRIVER• Light inside handle illuminates when spark is detected. • For use on ignition systems only.

Item No. Tip Width Length Blade Weight

ST-1214 1/8" 2.3" 0.04 lbs.

BIT DRIVER

Item No. Weight

900-70 0.07 lbs.

OFFSET SCREWDRIVERS

Item No. Tip Length Blade WeightST-1183 3/16" 3.0" 0.04 lbs.ST-1184 3/16" 4.0" 0.04 lbs.ST-1185 1/4" 4.5" 0.08 lbs.

SLOTTED SCREW STARTERS• Use to start the screw with one hand inserting or backing off the screw.• Inserted blade into the slot, turn slightly and release.• The center section of the blade rotates and exerts a positive grip upon

the screw slot.

Item No. Length Blade WeightST-1166 2.5" 0.05 lbs.ST-1167 5.5" 0.25 lbs.ST-1168 9.5" 0.59 lbs.

PHILLIPS® SCREW STARTERS• For starting Phillips® screws in tight, hard-to-reach spots. • The screw is held tightly with just a twist of the bit, then released when

the torque increases, after the screw has taken hold. • Strong magnet on opposite end makes retrieving small parts easy.

Item No. Length Blade Weight

ST-1171 5.8" 0.30 lbs.

8 PIECE STANDARD NUT DRIVER INCH SET — 6 POINT• Weight: 2.00 lbs.

Item No. Contents Description SizeST-828 ST-800 Standard Nut Driver 3/16"

ST-801 Standard Nut Driver 9/32"ST-803 Standard Nut Driver 1/4"ST-806 Standard Nut Driver 5/16"ST-809 Standard Nut Driver 11/32"ST-812 Standard Nut Driver 3/8"ST-815 Standard Nut Driver 7/16"ST-818 Standard Nut Driver 1/2"

Pouch


S C R E W D R I V E R S , N U T D R I V E R S , & B I T S


SC

REW

DR

IVER

S, NU

TD

RIV

ERS, H

EXK

EYS

& B

ITS



9 PIECE METRIC NUT DRIVER SET — 6 POINT• Weight: 2.22 lbs.

Item No. Contents Description SizeST-829M ST-904M Metric Nut Driver 4 mm

ST-905M Metric Nut Driver 5 mmST-955M Metric Nut Driver 5.5 mmST-907M Metric Nut Driver 7 mmST-908M Metric Nut Driver 8 mmST-909M Metric Nut Driver 9 mmST-910M Metric Nut Driver 10 mmST-911M Metric Nut Driver 11 mmST-912M Metric Nut Driver 12 mm

Pouch

STANDARD NUT DRIVERS — 6 POINT

Item No. Size WeightST-800 3/16" 0.14ST-801 9/32" 0.14ST-803 1/4" 0.14ST-806 5/16" 0.18ST-809 11/32" 0.20ST-812 3/8" 0.21ST-815 7/16" 0.27ST-818 1/2" 0.28

ASME B107.12

METRIC NUT DRIVERS — 6 POINT

Item No. Size WeightST-904M 4 mm 0.14ST-905M 5 mm 0.14ST-955M 5.5 mm 0.14ST-907M 7 mm 0.18ST-908M 8 mm 0.20ST-909M 9 mm 0.21ST-910M 10 mm 0.27ST-911M 11 mm 0.28ST-912M 12 mm 0.30

ASME B107.35M

40 PIECE INSERT BIT SET• Weight: 2.00 lbs.

Item No. Contents Description Blade940-JS 9000-A Adapter Socket

900-20 # 0 Pt. Phillips®




900-51 Phillips® ARC, #1900-52 Phillips® ARC, #2900-53 Phillips® ARC, #3900-0 Slotted 7/64"900-5 Slotted 7/32"900-1 Slotted 1/8"900-2 Slotted 9/64"900-8 Slotted 5/16"900-3 Slotted 5/32"900-4 Slotted 3/16"900-6 Slotted 1/4"900-7 Slotted 9/32"900-30 Square Head, #0900-31 Square Head, #1900-32 Square Head, #2

Contents Description Blade900-33 Square Head, #3900-40 Reed Prince #0 (Pozi)900-41 Reed Prince #1 (Pozi)900-42 Reed Prince #2 (Pozi)900-43 Reed Prince #3 (Pozi)900-60 Hex Bit, 5/64"900-61 Hex Bit, 1/8"900-62 Hex Bit, 5/32900-63 Hex Bit, 3/16"900-64 Hex Bit, 1/4"9000-T6 Torx® Bit T69000-T7 Torx® Bit T79000-T8 Torx® Bit T89000-T10 Torx® Bit T109000-T15 Torx® Bit T159000-T20 Torx® Bit T209000-T25 Torx® Bit T259000-T27 Torx® Bit T279000-T30 Torx® Bit T309000-T40 Torx® Bit T40Pouch



SC

REW

DR

IVER

S, N

UT

DR

IVER

S, H

EXK

EYS

& B

ITS


INSERT BITS

Item No. Description Blade Weight

9000-A Adapter Socket 0.01

900-20 # 0 Pt. Phillips® 0.01

900-21 # 1 Pt. Phillips® 0.01

900-22 # 2 Pt. Phillips® 0.01

900-23 # 3 Pt. Phillips® 0.01

900-51 Phillips® ARC, #1 0.01

900-52 Phillips® ARC, #2 0.01

900-53 Phillips® ARC, #3 0.01

900-0 Slotted 7/64" 0.01

900-5 Slotted 7/32" 0.01

900-1 Slotted 1/8" 0.01

900-2 Slotted 9/64" 0.01

900-8 Slotted 5/16" 0.01

900-3 Slotted 5/32" 0.01

900-4 Slotted 3/16" 0.01

900-6 Slotted 1/4" 0.01

900-7 Slotted 9/32" 0.01

900-30 Square Head, #0 0.01

900-31 Square Head, #1 0.01

900-32 Square Head, #2 0.01

900-33 Square Head, #3 0.01

900-40 Reed Prince #0 (Pozi) 0.01




9000-TP10 Tamper Resistant T10 0.01





900-60 Hex Bit, 5/64" 0.01

900-61 Hex Bit, 1/8" 0.01

900-62 Hex Bit, 5/32 0.01

900-63 Hex Bit, 3/16" 0.01

900-64 Hex Bit, 1/4" 0.01

9000-T6 Torx® Bit T6 0.01

9000-T7 Torx® Bit T7 0.01

9000-T8 Torx® Bit T8 0.01

9000-T10 Torx® Bit T10 0.01

9000-T15 Torx® Bit T15 0.01

9000-T20 Torx® Bit T20 0.01

9000-T25 Torx® Bit T25 0.01

9000-T27 Torx® Bit T27 0.01

9000-T30 Torx® Bit T30 0.01

9000-T40 Torx® Bit T40 0.01


S C R E W D R I V E R S & B I T S


SC

REW

DR

IVER

S, NU

TD

RIV

ERS, H

EXK

EYS

& B

ITS



26 PIECE RATCHETING SCREWDRIVER SET• Weight: 1.17 lbs.

Item No. Contents Description Blade

9026NB 9000-T10 T10 Torx® Bit

9000-T15 T15 Torx® Bit




900-21 1 Pt. Phillips®


900-4 3/16" Slotted Bit



9000R Ratcheting Screwdriver

9000-A Adapter Socket

GW-1606 3/16", 6 Pt. Socket

GW-1608 1/4", 6 Pt. Socket

GW-1610 5/16", 6 Pt. Socket

GW-1611 11/32", 6 Pt. Socket

GW-1612 3/8", 6 Pt. Socket

GW-1614 7/16", 6 Pt. Socket

GW-1616 1/2", 6 Pt. Socket

GW-606M 6 mm, 6 Pt. Socket







Blow Molded Case

9 PIECE RATCHETING SCREWDRIVER SET• Weight 0.68 lbs.

Item No. Contents Description Blade

9023 9000R Ratcheting Screwdriver











SC

REW

DR

IVER

S, N

UT

DR

IVER

S, H

EXK

EYS

& B

ITS

H E X K E Y S

13 PIECE STANDARD HEX KEY WRENCH SET• Weight 0.63 lbs.

Item No. Size Short Arm Long Arm

ZW-53 .050" 0.5" 1.6"

1/16" 0.6" 1.7"

5/64" 0.6" 1.8"

3/32" 0.6" 2.0"

7/64" 0.7" 2.1"

1/8" 0.7" 2.2"

9/64" 0.8" 2.4"

5/32" 0.8" 2.5"

3/16" 0.9" 2.7"

7/32" 1.0" 2.9"

1/4" 1.1" 3.2"

5/16" 1.2" 3.6"

3/8" 1.3" 4.1"

13 PIECE STANDARD LONG HEX KEY WRENCH SET• Weight 0.88 lbs.


ZW-59 .050" 0.6" 2.8"

1/16" 0.6" 3.0"

5/64" 0.6" 3.0"

3/32" 0.7" 3.4"

7/64" 0.7" 3.5"

1/8" 0.7" 3.7"

9/64" 0.8" 3.9"

5/32" 0.8" 4.1"

3/16" 0.9" 4.5"

7/32" 1.0" 4.8"

1/4" 1.1" 5.2"

5/16" 1.2" 5.8"

3/8" 1.4" 6.6"

9 PIECE METRIC HEX KEY WRENCH SET• Weight 0.58 lbs.


ZW-69 1.5 mm 13.1 mm 43.1 mm

2.0 mm 14.8 mm 47.8 mm

2.5 mm 17.1 mm 53.1 mm

3.0 mm 18.5 mm 60.8 mm

4.0 mm 23.4 mm 66.6 mm

5.0 mm 27.3 mm 76.2 mm

6.0 mm 30.9 mm 87.0 mm

8.0 mm 34.5 mm 95.9 mm

10.0 mm 37.5 mm 105.4 mm


PL

IER

S

MADE IN

UUUU SSSS AAAAVisit us at...www.stanleyproto.com158

LOCK RING PLIERS• Designed to spread snap lock rings and remove horseshoe type brake key from shoe. • Spring action keeps jaws in closed position for easy operation. • Jaws notched and outside face knurled to prevent slipping.

Item No. Length WeightPT-1266 7.750" 0.56 lbs.

COMBINATION INTERNAL/EXTERNAL HEAVY-DUTY RETAINING RING PLIERS

Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1286 0.070" 0.312" 1.250" 8.125" 0.30 lbs.

AMSE B107.19M

EXTERNAL RETAINING RING PLIERS


AMSE B107.19M

INTERNAL RETAINING RING PLIERS

Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1288 0.38" 0.312" 0.750 5.562" 0.14 lbs.

AMSE B107.19M

COMBINATION INTERNAL/EXTERNAL RETAINING RING PLIERS WITH 90° BENT TIPS


AMSE B107.19M

COMBINATION INTERNAL/EXTERNAL RETAINING RING PLIERS


AMSE B107.19M

P L I E R S

Pliers.qxd 6/24/05 1:46 PM Page 158

PLIERS.A BROAD RANGE AVAILABLE.

BlackhawkTM by Proto® Pliers are manufactured from alloy steel then heat treated for strength and durability. Most

have cushion grips for comfort. Manufactured to meet the demands of automotive and light industrial applications.


P L I E R S

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.155

Toll Free Customer Service Number: 1-800-800-TOOLCustomer Service FAX Number: 1-770-648-9108

PT-1105 PT-1106 PT-1107 PT-1110

PT-1300 PT-1310 PT-1320

PL

IER

S

LOCKING PLIERS

Item No. Description Length WeightPT-1105 Curved Jaw Locking Plier 5" 0.35 lbs.PT-1106 Long Nose Locking Plier 6" 0.38 lbs.PT-1107 Straight Jaw Locking Plier 7" 0.77 lbs.PT-1110 Curved Jaw Locking Plier 10" 1.15 lbs.

ASME B107.24

LONG REACH PLIERS

Item No. Description Length Weight SpecificationsPT-1300 Straight Nose Long Reach Plier 11-1/2" 0.69 lbs. ASME B107.13MPT-1310 Bent Nose Long Reach Plier 11-1/2" 0.67 lbs. ASME B107.13MPT-1320 Cutter/Gripper Long Reach Plier 11" 0.80 lbs.

4-PIECE MINI LONG REACH PLIER SET• Precision plier set, 1" longer than standard mini pliers.

Item No. Description WeightPT-3000 Diagonal 1.13 lbs.

Long Nose BentLong Nose w/CutterFlat Nose (Duck Bill)


PL

IER

S


DIAGONAL CUTTING PLIERS• Cushion grip.

Item No. Length WeightPT-1052-1 6" 0.39 lbs.

ASME B107.11M

LARGE DIAGONAL PLIERS• Cushion grip.


ASME B107.11M

HEAVY DUTY DIAGONAL PLIERS• Cushion grip.• Short nose.


ASME B107.11M

MIDGET DIAGONAL CUTTING PLIERS• Cushion grip.

Item No. Length WeightPT-1150 5" 0.34 lbs.

ASME B107.11M

LONG NOSE SIDE CUTTING PLIERS• Cushion grip.

Item No. Length WeightPT-1128-1 6-1/2" 0.31 lbs.

ASME B107.13M

MIDGET NEEDLE NOSE PLIERS• Cushion grip.

Item No. Length WeightPT-1154 5-1/2" 0.16 lbs.

ASME B107.13M


PL

IER

S

P L I E R S

WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.157

Toll Free Customer Service Number: 1-800-800-TOOLCustomer Service FAX Number: 1-770-648-9108

CURVED NEEDLE NOSE PLIERS• Cushion grip.• 75º bent jaw.


AMSE B107.13M

LINEMAN’S PLIERS• Cushion grip.


AMSE B107.20M

DUCKBILL WIRING PLIERS• Cushion grip.


AMSE B107.13M

WIRE STRIPPER AND CRIMPER• Cushion grip.

Item No. Length WeightPT-1050 8-1/2" 0.45 lbs.

AMSE B107.37M

BATTERY PLIERS• Cushion grip.



PL

IER

S

MADE IN


LOCK RING PLIERS• Designed to spread snap lock rings and remove horseshoe type brake key from shoe. • Spring action keeps jaws in closed position for easy operation. • Jaws notched and outside face knurled to prevent slipping.

Item No. Length WeightPT-1266 7.750" 0.56 lbs.

COMBINATION INTERNAL/EXTERNAL HEAVY-DUTY RETAINING RING PLIERS


AMSE B107.19M

EXTERNAL RETAINING RING PLIERS


AMSE B107.19M

INTERNAL RETAINING RING PLIERS

Item No. Tip Diameter Tip Length Nose Width Total Length WeightPT-1288 0.38" 0.312" 0.750 5.562" 0.14 lbs.

AMSE B107.19M

COMBINATION INTERNAL/EXTERNAL RETAINING RING PLIERS WITH 90° BENT TIPS


AMSE B107.19M

COMBINATION INTERNAL/EXTERNAL RETAINING RING PLIERS


AMSE B107.19M

P L I E R S


HAMMERS, CHISELS,

PUNCHES, PRY BARS.

Blackhawk™ by Proto® tools comprise of an assortment of striking and struck products. Both categories have

the right mix of products to meet basic automotive, fleet maintenance and light-industrial applications.

(Other hammers available in the Stanley® Hand Tool section.)

Sriking and Struck.qxd 6/24/05 1:47 PM Page 159


HA

MM

ER

S,

CH

ISE

LS

, P

UN

CH

ES

& P

RY

BA

RS

BALL PEIN HAMMERS

Item No. Head Weight Length Weight

HT-1005-1 16 oz. 14" 1.49 lbs.

HT-1007-1 24 oz. 15" 2.10 lbs.

HT-1008-1 32 oz. 16" 2.83 lbs.

SOFTFACE HAMMERS• Tough, replaceable, molded plastic head.

Item No. Head Weight Length Total Weight

HT-1452 7 oz. 12.25" 1.0 lbs.

HT-1453 13 oz. 12.25" 1.7 lbs.

HT-1452T Replacement tip 1.4 oz.

(1 Tip per package)

RUBBER MALLET• High grade rubber head pinned to the handle.

Item No. Head Weight Length Weight

HT-1255 0.8 lbs. 13.25" 1.2 lbs.

Additional hammers can be found in the Hand Tools section.



HA

MM

ER

S, CH

ISE

LS, P

UN

CH

ES

& P

RY

BA

RS



H A M M E R S , C H I S E L S & P U N C H S E T S

14-PIECE CHISEL AND PUNCH SET• Weight: 3.81 lbs.


CT-114 CT-1003 5/16" Hand Cold Chisel

CT-1004 3/8" Hand Cold Chisel




CT-1156 1/2" Flat Cape Chisel

CT-1254 3/8" Diamond Point Chisel

CT-1304 7/16" Center Punch 5-1/2" L

CT-1314 3/8" Prick Punch 5" L

CT-1453 5/16" Pin Punch 5" L

CT-1454 5/16" Pin Punch 5-1/4" L

CT-1456 5/16" Pin Punch 5-1/2" L

CT-1464 3/8" Pin Punch 7" L


Pouch

5-PIECE PIN PUNCH SET• Weight: 0.88 lbs.


CT-205 CT-1453 5/16" Pin Punch 5" L

CT-1454 5/16" Pin Punch 5-1/4" L

CT-1456 5/16" Pin Punch 5-1/2" L



Pouch

5-PIECE COLD CHISEL SET• Weight: 2.30 lbs.

Item No. Contents Description Bit/Edge Length

CT-105 CT-1003 5/16" 3/8" 5-1/4"

CT-1004 3/8" 7/16" 5-1/2"

CT-1006 1/2" 5/8" 6-1/2"

CT-1008 5/8" 3/4" 7"

CT-1010 3/4" 7/8" 7-1/2"

Pouch



HA

MM

ER

S,

CH

ISE

LS

, P

UN

CH

ES

& P

RY

BA

RS

MADE IN

UUUU SSSS AAAA

COLD CHISELS

Item No. Size Stock Bit/Edge Length Weight

CT-1003 5/16" 3/8" 5-1/4" 0.02 lbs.

CT-1004 3/8" 7/16" 5-1/2" 0.18 lbs.

CT-1006 1/2" 5/8" 6-1/2" 0.37 lbs.

CT-1008 5/8" 3/4" 7" 0.60 lbs.

CT-1010 3/4" 7/8" 7-1/2" 0.95 lbs.

ASME B107.47M

ROUND NOSE CHISEL


CT-1204 3/8" 1/4" 5-1/2" 0.17 lbs.

ASME B107.47M

DIAMOND POINT CHISEL


CT-1254 3/8" 3/16" 5" 0.15 lbs.

ASME B107.47M

CAPE CHISEL


CT-1156 3/8" 1/4" 5-1/2" 0.17 lbs.

ASME B107.47M

LONG COLD CHISELS


CT-1108 5/8" 3/4" 12" 1.07 lbs.

CT-1110 3/4" 7/8" 12" 1.55 lbs.

ASME B107.47M


C H I S E L S & P U N C H E S


HA

MM

ER

S, CH

ISE

LS, P

UN

CH

ES

& P

RY

BA

RS



HAND PUNCH


CT-1404 3/8" 3/16" 5" 0.14 lbs.

ASME B107.48M

LONG TAPER PUNCHES


CT-1554 1/2" 5/32" 8-1/2" 0.36 lbs.

CT-1556 1/2" 3/16" 9" 0.37 lbs.

CT-1558 5/8" 5/16" 11" 0.76 lbs.

ASME B107.48M

CENTER PUNCHES


CT-1303 3/8" 5/32" 5" 0.12 lbs.

CT-1304 7/16" 3/16" 5-1/2" 0.20 lbs.

CT-1306 1/2" 1/4" 6" 0.28 lbs.

ASME B107.48M

PIN PUNCHES


CT-1453 5/16" 1/8" 5" 0.09 lbs.

CT-1454 5/16" 5/32" 5-1/4" 0.10 lbs.

CT-1456 5/16" 3/16" 5-1/2" 0.10 lbs.

CT-1464 3/8" 1/4" 7" 0.19 lbs.

CT-1466 1/2" 5/16" 7" 0.33 lbs.

ASME B107.48M



HA

MM

ER

S,

CH

ISE

LS

, P

UN

CH

ES

& P

RY

BA

RS

MADE IN

UUUU SSSS AAAA

ALIGNING PUNCH


CT-1509 5/8" 1/4" 11" 0.76 lbs.

ASME B107.48M

SCRIBING PUNCH


CT-1314 3/8" 5/32" 5" 0.13 lbs.

ASME B107.48M

PRY BARS


CT-1617 1/2" 1-15/16" 15" 0.83 lbs.

CT-1620 5/8" 2-5/8" 18" 1.57 lbs.

ASME B107.60M

PINCH BARS


CT-1606 1/2" 5/8" 14" 0.70 lbs.

CT-1610 5/8" 3/4" 16" 1.21 lbs.

ASME B107.60M

P U N C H E S & P R Y B A R S


PULLERS.FOR MULTIPLE APPLICATIONS.

Blackhawk™ by Proto® gear and specialty pullers are available for automotive and light industrial applications

in a range of styles and sizes to meet your needs.

Pullers.qxd 6/24/05 1:48 PM Page 165

MADE IN


PU

LL

ER

S

10" ADJUSTABLE GEAR PULLER• 7 ton capacity.• Heavy-duty.• All parts are heat-treated for long life. • Three-position jaws provide added versatility with extended reach capabilities. • Power pitch threads on center screw allow for increased pulling power.

Max. Max. Center Screw Item No. Spread Reach Capacity Size Weight

ET-1011 10" 9" 7 Tons .69" x 8.38" 4.84 lbs.

7" ADJUSTABLE GEAR PULLER• 5 ton capacity.• A middle-range puller capable of handling a wide variety of applications. • Yoke and jaws are drop-forged from alloy steel.• All parts are heat-treated for long life. • Two-position jaws for versatility.• Power pitch threads on center screw allow for increased pulling power.


ET-1008 7" 5.50" 5 Tons .56" x 6.38" 2.18 lbs.

SMALL GEAR PULLER• 2 ton capacity.• Designed for pulling small gears, bearings and armature arbors. • Power pitch threads on center screw allow for increased pulling power.


ET-1005 4" 3.50" 2 Tons .38" x 4.25" 0.98 lbs.


G E A R P U L L E R S


PU

LL

ER

S



9" REVERSIBLE 2-JAW GEAR PULLER• 7 ton capacity.• Reversible arms provide thin grips at one end for application in restricted spaces;

slotted grips at the others.• Incorporates automatic grip tightening.


ET-1010 9" 5.50" 7 Tons .69" x 8.38" 4.39 lbs.

6" REVERSIBLE GEAR PULLER• 5 ton capacity.• Designed for removal of magneto and generator gears and bearings, timed gears,

pinions and other small parts.• Incorporates automatic grip tightening.


ET-1007 6" 3.50" 5 Tons .56" x 6.38" 2.17 lbs.

8-IN-1 PULLER• 2 ton capacity.• Adapts to almost any application quickly and easily. • Only 16 pieces make 8 different pullers. • Choose 2- or 3-jaw configurations, long or short reach, wide or narrow jaws. • Comes in a tough plastic organizer box.


ET-1170A 6" 5.50" 4 Tons .63" x 7.00" 3.61 lbs.


TAPERED BEARING SPLINTERS• Designed for the removal of bearings, thin-faced gears and cone-shaped gears. • Beveled edge allows insertion behind pulleys, gears, or bearings where space

limitations preclude the use of a standard jaw puller. • For bearing removal, we recommend these attachments be used in conjunction

with Blackhawk™ by Proto® puller ET-1322 for ET-1205 only.

Item No. Min. Reach Max. Reach Weight

ET-1205 0 2.25" 1.11 lbs.

ET-1207 0 4.25" 5.07 lbs.

BODY DENT PULLER• Removes auto body creases and dents without disturbing upholstery, headliners

and body hardware. • Removing inner panels of dented area is also eliminated. • Punch or drill hole in dented panel, insert self-threading screw or hook and with a

few raps of the sliding hammer return metal to its original shape. • Sturdy plastic handle and black oxide body.


ET-1710 13.00" 3.72 lbs.

PILOT BEARING PULLER• Use for removing sleeve-type bearings from 1/2" to 1-1/4" inside diameters on

flywheels, pumps and generators. • Turn the handle for quick adjustment and the center rod spreads in the alloy jaws

for a tight fit inside the gearing.

Item No. Max. Reach Spread Weight

ET-1068A 1.50" .50" to 1.25" 4.13 lbs.


PU

LL

ER

S


HEAVY-DUTY UNIVERSAL HUB PULLER• For use where hub bolt circle does not exceed 7-1/2".• Sliding arms are quickly adjusted to fit any hub, regardless of the number of

wheel studs used.

Item No. Bolt Circle Range Weight

ET-1156A 7.50" 9.57 lbs.

GEAR AND PULLEY PULLER• Designed for pulling timing gears, bearings and races on generators and other parts

such as fan pulleys, etc. • The slotted block permits a wide range of adjustments. • The screw is long enough to reach through the crank hole and remove the fan pulley

without dismounting the radiator. • Use with ET-1205 for push-pull operations.

Item No. Screw Size Weight

ET-1322 6.00" 1.72 lbs.

BATTERY TERMINAL AND GENERATOR BEARING PULLER• Designed to engage either below or on the the sides of the cable terminals and lift

even badly corroded terminals with no harm to the battery case or posts. • The swivel allows its use as a generator bearing puller and magneto gear puller.

Item No. Weight

ET-1071A 0.64 lbs.

S P E C I A L T Y P U L L E R S


PU

LL

ER

S





PU

LL

ER

S

STEERING WHEEL PULLER• Any steering wheel that is tapped to take cap screws can be easily removed with this

Steering Wheel Puller, for removing flanges, pulleys, etc. • For use over a hollow shaft, a nipple is supplied to provide a base for the screw. • Also includes adapters for Buick® and Chrysler® products (not shown.)

Item No. Weight

ET-1328A 2.25 lbs.

Buick® is a registered trademark of General Motors Corporation.Chrysler® is a registered trademark of Daimler Chrysler Corporation.

HARMONIC BALANCER PULLER• Designed for use on balancers, vibration dampers, pulleys or any gear with

tapped holes. • The four slots in the yoke allow the use of this tool in either 2 or 3-hole applications. • The floating swivel prevents damage to shaft ends. • Included are the necessary side screws —

(3) 3/8" x 24 x 2"; (3) 5/16" x 18 x 2"; (2) 3/8" x 16 x 4"; (3) M8 x 1.25 x 80 mm; (3) M10 x 1.50 x 50 mm (not shown).

Item No. Weight

ET-1330 2.71 lbs.

S P E C I A L T Y P U L L E R S


MISCELLANEOUS TOOLS.

No tool box is complete without an assortment of miscellaneous tools. BlackhawkTM by Proto® offer specialty

automotive feeler gauges, engine, brake and wheel tools. Other tools such as a tubing bender, steel and wire

scratch brushes, wire power tool brushes, scrapers, hacksaws and replacement blades complete the tool box.

Miscellaneous.qxd 6/24/05 1:50 PM Page 171

NON-MAGNETIC FEELER GAUGE

Item No. Contents SAE (Metric) Sizes

MT-1020-1 6 blades .006" (.15 mm)

.008" (.20 mm)

.010" (.25 mm)

.012" (.30 mm)

.014" (.356 mm)

.016" (.406 mm)

6 WIRE HIGH-ENERGY FEELER GAUGE• For large gap, high energy ignition systems.• Contains 6 wire gauges and a gap setting tool.• Wire ends angled for use with electrodes set below the shell.

Item No. Contents SAE (Metric) Sizes

MT-1021A 6 wire gauges .044" (1.12 mm)

.045" (1.15 mm)

.050" (1.25 mm

.054" (1.37 mm)

.060" (1.52 mm)

.080" (2.03 mm)

SPARK PLUG AND IGNITION FEELER GAUGE• Gauges for adjusting both spark plugs and points. • Each gauge is specified in SAE and Metric sizes. • Also included are a spark plug adjusting tool and an ignition file. • Weight: 0.11 lbs.

Item No. Set Contains SAE (Metric) Sizes

MT-1024 8 Wire Gauges 0.022" (0.559 mm)

0.025" (0.635 mm)

0.028" (0.711 mm)

0.030" (0.762 mm)

0.032" (0.813 mm)

0.035" (0.889 mm)

0.038" (0.965 mm)

0.040" (1.020 mm)

15 Blades 0.012" (0.305 mm)

0.013" (0.330 mm)

0.014" (0.356 mm)

0.015" (0.381 mm)

0.016" (0.406 mm)

0.017" (0.432 mm)

0.018" (0.457 mm)

0.019" (0.483 mm)

0.020" (0.508 mm)

0.022". (0.559 mm)

0.024". (0.610 mm)

0.025" (0.635 mm)

0.028" (0.711 mm)

0.030" (0.762 mm)

0.032" (0.813 mm)

MADE IN


MIS

CE

LL

AN

EO

US


6 WIRE HIGH ENERGY SPARK PLUG FEELER GAUGE• For adjusting spark plugs on cars with high-energy electronic systems

which require large plug gaps. • Includes 6 precision made wires and adjusting tool.• Weight: 0.06 lbs.

Item No. Contents Sizes

MT-1026A 6 Wire Gauges 0.63 mm, 0.71 mm

0.76 mm, 0.81 mm

0.89 mm, 1.00 mm

7 WIRE HIGH ENERGY SPARK PLUG FEELER GAUGE• For adjusting spark plugs on cars with high-energy electronic systems

which require large plug gaps. • Includes 7 precision made wires and adjusting tool. • Weight: 0.07 lbs.


MT-1027A 7 Wire Gauges 0.50 mm, 0.65 mm, 0.71 mm

0.76 mm, 0.81 mm

0.89 mm, 1.0 mm

REGULAR SPARK PLUG WIRE GAUGE


MT-1040-1 1 Electrode bender

8 Wire gauges .020", .025", .028", .030"

.032", .034", .035", .040"

FEELER GAUGE• Services domestic and foreign cars.


MT-1041 16, 1.75" x 0.25" blades .011", .012", .013", .014"

.015", .016", .017", .018"

.019", .020", .022", .024"

.025", .028", .030", 035"

IGNITION FEELER GAUGE


MT-1042 12, 1.75" x 0.25" blades .011", .012", .013", .014"

.015", .016", .017", .018"

.019", .020", .022", .025"

S P A R K P L U G & F E E L E R G A U G E S


MIS

CE

LL

AN

EO

US




10 PIECE STANDARD FEELER GAUGE SET


MT-1048 10, 3.31" x 0.5" blades .002", 003", .004", .005", .006"

.007", .008", .010", .012", .015"

15 BLADE GO-NO-GO GAUGE


MT-1043 15, 3.31" x 0.5" blades .006" (.152 mm) to .020" (.508 mm)

(See chart for full details.)

22 BLADE GO-NO-GO IGNITION FEELER GAUGES• High grade precision milled blades insure accurate readings.• Metric and fractional sizes.


MT-1022 22, 3.31" x 0.5" blades .004" (.101 mm) to .025" (.635 mm)

(See chart for full details.)

ALL PURPOSE FEELER GAUGE


MT-1049 25, 3.31" x 0.5" blades .0015", .002", .003", .004", .005"

.006", .007", .008", .009", .010"

.011", .012", .013", .014", .015"

.016", .018", .020", .022", .024"

.025", .028", .030", .032", .035"

MADE IN


MIS

CE

LL

AN

EO

US

SAE Metric SAE Metric

.002"-.003" .050 mm-.076 mm .014"-.016" .356 mm-.406 mm

.003"-.004" .076 mm-.101 mm .015"-.017" .381 mm-.432 mm

.004"-.006" .101 mm-.152 mm .016"-.018" .406 mm-.457 mm

.005"-.007" .127 mm-.178 mm .017"-.019" .432 mm-.483 mm

.006"-.008" .152 mm-.203 mm .018"-.020" .457 mm-.508 mm

.007"-.009" .177 mm-.229 mm .019"-.021" .483 mm-.533 mm

.008"-.010" .203 mm-.254 mm .020"-.022" .508 mm-.559 mm

.009"-.011" .229 mm-.279 mm .021"-.023" .533 mm-.584 mm

.010"-.012" .254 mm-.305 mm .022"-.024" .559 mm-.610 mm

.011"-.013" .279 mm-.330 mm .023"-.025" .584 mm-.635 mm

.012"-.014" .305 mm-.356 mm .024"-.026" .610 mm-.660 mm

.013"-.015" .330 mm-.381 mm .025"-.027" .635 mm-.686 mm

Size Reference Chart



MIS

CE

LL

AN

EO

US



9/16" DISTRIBUTOR WRENCH

Item No. Weight

XT-1012 0.48 lbs.

1/2" DISTRIBUTOR WRENCH

Item No. Weight

XT-1011 0.46 lbs.

BRAKE SPRING PLIER• Comes with an adapter for lifting anchor pins.


PT-1262 14" 1.07 lbs.


BALL JOINT SEPARATOR• Made of alloy steel, this tool is built for rugged use. • Comfort grip handle. • Simply place prongs between ball joint and steering knuckle to easily separate

the ball joint.

Item No. Opening Length Weight

XT-1060 0.94" 11.88" 1.62 lbs.

SHOCK ABSORBER LINK SEPARATOR• Eliminates the tough job in separating shock absorber links and the tie rod joints. • Insert the tapered wedge between the parts, hit the end of the tool with a hammer

and the part is removed.

Item No. Opening Length Weight

ZT-1550 0.75" 12" 1.52 lbs.

HOLDER RETRIEVER — FULLY FLEXIBLE• For starting a nut or screw in an inaccessible spot or retrieving parts that fall into

hard-to-reach places.


ZT-1180 13.5" 0.21 lbs.

TELESCOPING MAGNET TOOL• Magnetic end for retrieving tools, parts or fasteners from hard-to-reach places. • The end contains a powerful permanent magnet and is arranged on a pivot that can

be rotated 120° right or left. • The aluminum shaft with vinyl insulated handle provides a firm, secure grip. • Extends from a telescoped 16-1/2" length to 27" fully extended.


ZT-1193 16.5"–27" 0.36 lbs.

MADE IN


MIS

CE

LL

AN

EO

US


FLEXIBLE MAGNET TOOL• Magnetic end for retrieving, flexible shaft for hard-to-reach places.• Completely nickel plated. • Flexible shaft.


ZT-1197 18" 0.18 lbs.

TELESCOPING INSPECTION MIRROR• For fast visual inspection of all hidden areas. • The double ball joint permits easy viewing at 360°. • Mirror telescopes to 14".• Specially designed non-rotating hex rod helps prevent mirror from swinging

out of alignment. • Mirror has a vinyl insulated handle.


ST-1250 14" 0.24 lbs.

5 PIECE SCREW EXTRACTOR SET• Hand forged to ensure correct angle and grip. • Used to remove broken studs, set screws, pipe and alemite fittings.

Item No. Contents Bolt Diameter Drill Size Overall Length Weight

DT-55 DT-2601 1/4" to 5/16" 1/8" 2.38" 0.02 lbs.

DT-2602 3/8" 3/16" 2.69" 0.03 lbs.

DT-2603 7/16" 15/64" 2.94" 0.05 lbs.

DT-2604 1/2" to 9/16" 5/16" 3.13" 0.08 lbs.

DT-2605 5/8" 3/8" 3.38" 0.11 lbs.

STUD EXTRACTOR• Extractor will remove or install 1/4" to 3/4" stud sizes. • Constructed to permit gripping wheel to lay flush on flat surfaces to engage stud at

lowest point if required without damage to stud threads. • Drive socket extends through entire housing to prevent binding.

Item No. Description Weight

49980 Stud Extractor 1.11 lbs.

S P E C I A L T Y T O O L S


MIS

CE

LL

AN

EO

US





MIS

CE

LL

AN

EO

US

TUBING BENDER• Quickly and easily bends 3 sizes (3/16", 1/4", 5/16") of steel or 3/8"copper tubes.• Bends up to 180°. • Nylon form prevents kinking.• Weight: 0.92 lbs.

Item No. Length

ZT-1125 6"

HEAVY-DUTY WIRE WHEEL• Use on power tools and bench grinders to remove dirt, carbon, rust, paint

and scale from metal surfaces. • Includes adapters for standard arbor holes. • Safety glasses and protective clothing are recommended while using this brush.• Weight: 1.68 lbs.

Width of Max. SafeItem No. Diameter Face Arbor Hole Free Speed

ZT-1305 6" 1.13" 0.50" 4500 RPM

CARBON CLEANING END BRUSH• Removes hard carbon deposits as well as rust and paint from metal surfaces. • Use with 1/4" drill for general metal cleaning. • Safety glasses and protective clothing are recommended while using this brush.• Weight: 0.18 lbs.

Diameter Diameter Max. SafeItem No. Face Shank Free Speed

ZT-1301 0.75" 0.25" 20,000 RPM

HEAVY-DUTY KNOT END CLEANING BRUSH• Heavy gauge wire twisted into strong knot ends for tough use.• Use with 1/4" drill or flexible shaft equipment. • Safety glasses and protective clothing are recommended while using this brush.• Weight: 0.28 lbs.

Diameter Diameter Max. SafeItem No. Face Shank Free Speed

ZT-1300 1.13" 0.25" 20,000 RPM

MADE IN

UUUU SSSS AAAA



MIS

CE

LL

AN

EO

US



B E N D E R S , W I R E B R U S H E S & S C R A P E R S

HEAVY-DUTY SCRATCH BRUSH WITH SCRAPER• Thick clusters of heavy gauge wire for heavy-duty use. • 16 rows, 4 rows wide. • 1-3/16" long wires, built-in steel scraper.• Weight: 0.42 lbs.

Item No. Overall Length

ZT-1312 10"

STEEL WIRE SCRATCH BRUSH• A sturdy brush with 19 rows, 3 rows wide.• 1-3/16" long wires. • Weight: 0.34 lbs.

Item No. Overall Length

ZT-1310 14"

CARBON SCRAPER• Weight: 0.16 lbs.

Item No. Width Length

ZT-1111 1.25" 7.25"

DEGREASING SCRAPER• Weight: 0.17 lbs.

Item No. Width Length

ZT-1112 1.25" 7.25"

GASKET SCRAPER


ZT-1102 11" 0.25 lbs.



MIS

CE

LL

AN

EO

US

DELUXE ADJUSTABLE HACKSAW FRAME• Our finest heavy-duty steel hacksaw frame guards against breakage of high-speed blades. • Impact-resistant pistol grip handle. • Adjustable frame locks on 10" and 12" blades.

Item No. Weight

FT-1204 1.78 lbs.

ADJUSTABLE HACKSAW FRAME• Handy adjustable hacksaw frame is ideal for general use. • Adjustable frame locks on 10" and 12" blades.

Item No. Weight

FT-1202 1.37 lbs.

HIGH SPEED HACKSAW BLADES• A molybdenum high speed steel blade of superb quality and durability. • Will cut nickel, high carbon steel and other tough alloys.

Item No. Length Width Thickness Teeth/in. Pkg. Qty Weight

FT-1103 12" 0.5" .025" 18 10 0.04 lbs.

FLEXIBLE HACKSAW BLADE• It is sometimes advisable to use these blades where cutting is to be done on surfaces

that are not extremely hard and where the possibility of flexing occurs.

Item No. Length Width Thickness Teeth/in. Pkg. Qty Weight

FT-1124 12" 0.5" .025" 24 10 0.04 lbs.

MADE IN

UUUU SSSS AAAA

S A W & B L A D E S


TOOL BOARDS.

The Blackhawk™ by Proto® Merchandising Tool Board Program includes some of our best selling tools

and customized Tool Board displays which meet many needs and space requirements.

Predrilled and riveted, these boards are made of heavy-duty, tempered pegboard with durable peg hooks

and trays. Boards come ready to hang with our standard hardware kit (included). The three board styles

are designed to meet most size requirements.

As a distributor looking for a convenient and attractive counter or wall display, or as a manufacturer

wanting to control inventory, let Blackhawk™ by Proto® Tool Boards work for you!

Board Size: 24" x 24"

Board Size: 24" x 48" Board Size: 12" x 24"

Tool boards.qxd 6/24/05 1:51 PM Page 181


TO

OL

BO

AR

DS

Item No. Description

HW-1524 SKT 3/8" DR DEEP 6PT 3/4"32007M SKT 3/8" DR 6PT 7MM32008M SKT 3/8" DR 6PT 8MM32009M SKT 3/8" DR 6PT 9MM32010M SKT 3/8" DR 6PT 10MM32011M SKT 3/8" DR 6PT 11MM32012M SKT 3/8" DR 6PT 12MM32013M SKT 3/8" DR 6PT 13MM32014M SKT 3/8" DR 6PT 14MM32015M SKT 3/8" DR 6PT 15MM32016M SKT 3/8" DR 6PT 16MM32017M SKT 3/8" DR 6PT 17MM32018M SKT 3/8" DR 6PT 18MM32019M SKT 3/8" DR 6PT 19MM32020M SKT 3/8" DR 6PT 20MM32021M SKT 3/8" DR 6PT 21MM32022M SKT 3/8" DR 6PT 22MMHW-1507M SKT 3/8" DR DEEP 6PT 7MMHW-1508M SKT 3/8" DR DEEP 6PT 8MMHW-1509M SKT 3/8" DR DEEP 6PT 9MMHW-1510M SKT 3/8" DR DEEP 6PT 10MMHW-1511M SKT 3/8" DR DEEP 6PT 11MMHW-1512M SKT 3/8" DR DEEP 6PT 12MMHW-1513M SKT 3/8" DR DEEP 6PT 13MMHW-1514M SKT 3/8" DR DEEP 6PT 14MMHW-1515M SKT 3/8" DR DEEP 6PT 15MMHW-1517M SKT 3/8" DR DEEP 6PT 17MMHW-1520S SKT 3/8" DR SPARK PLUG 5/8"HW-1526S SKT 3/8" DR SPARK PLUG 13/16"40112 SKT 1/2" DR 12PT 3/8"40114 SKT 1/2" DR 12PT 7/16"40116 SKT 1/2" DR 12PT 1/2"40118 SKT 1/2" DR 12PT 9/16"40120 SKT 1/2" DR 12PT 5/8"40122 SKT 1/2" DR 12PT 11/16"40124 SKT 1/2" DR 12PT 3/4"40126 SKT 1/2" DR 12PT 13/16"40128 SKT 1/2" DR 12PT 7/8"40130 SKT 1/2" DR 12PT 15/16"40132 SKT 1/2" DR 12PT 1"40134 SKT 1/2" DR 12PT 1-1/16"40136 SKT 1/2" DR 12PT 1-1/8"40320 SKT 1/2" DR DEEP 12PT 5/8"40322 SKT 1/2" DR DEEP 12PT 11/16"40324 SKT 1/2" DR DEEP 12PT 3/4"40326 SKT 1/2" DR DEEP 12PT 13/16"40328 SKT 1/2" DR DEEP 12PT 7/8"40330 SKT 1/2" DR DEEP 12PT 15/16"43010M SKT 1/2" DR 12PT 10MM43011M SKT 1/2" DR 12PT 11MM43012M SKT 1/2" DR 12PT 12MM43013M SKT 1/2" DR 12PT 13MM43014M SKT 1/2" DR 12PT 14MM42015M SKT 1/2" DR 12PT 15MM42016M SKT 1/2" DR 12PT 16MM42017M SKT 1/2" DR 12PT 17MM42018M SKT 1/2" DR 12PT 18MM42019M SKT 1/2" DR 12PT 19MM42020M SKT 1/2" DR 12PT 20MM42021M SKT 1/2" DR 12PT 21MM42022M SKT 1/2" DR 12PT 22MM44017M SKT 1/2" DR DEEP 12PT 17MM44018M SKT 1/2 "DR DEEP 12PT 18MM44019M SKT 1/2" DR DEEP 12PT 19MM44021M SKT 1/2" DR DEEP 12PT 21MM44022M SKT 1/2" DR DEEP 12PT 22MM44024M SKT 1/2" DR DEEP 12PT 24MM44027M SKT 1/2" DR DEEP 12PT 27MM40326S SKT 1/2" DR SPARK PLUG 6PT 13/16"40320S SKT 1/2" DR SPARK PLUG 6PT 5/8"

1/2" & 3/8" DRIVE TOOLSBD-1 (Board Only)BD-1-TL (Tools Only)BD-1- A (Board & Tools)


34993 UNIVERSAL JOINT 3/8" DR34963 ADAPTER 3/8" DR 3/8"F X 1/4"M34966 ADAPTER 3/8" DR 3/8"F X 1/2"M34984 EXTENSION 3/8" DR X 11"34989 EXTENSION 3/8" DR X 1-3/4"34988 EXTENSION 3/8" DR X 3"34987 EXTENSION 3/8" DR X 6"34946B RATCHET 3/8" DR ROUND HEAD POLISHED Q.R. 34945B RATCHET 3/8" DR ROUND HEAD 34986B FLEX HANDLE 3/8" DR X 10"49978 UNIVERSAL JOINT 1/2" DR34965 ADAPTER 1/2" DR 1/2"F X 3/8"M69992 ADAPTER INCREASING 1/2" DR 1/2"F X 3/4"M49964 EXTENSION 1/2" DR 1-13/16"49966 EXTENSION 1/2" DR 5"49990 EXTENSION 1/2" DR 10"49945B RATCHET 1/2" DR ROUND HEAD 49988B FLEX HANDLE 1/2" DR X 17"30608 SKT 3/8" DR 6PT 1/4"30010 SKT 3/8" DR 6PT 5/16"30612 SKT 3/8" DR 6PT 3/8"30614 SKT 3/8" DR 6PT 7/16"30616 SKT 3/8" DR 6PT 1/2"30618 SKT 3/8" DR 6PT 9/16"30620 SKT 3/8" DR 6PT 5/8"30622 SKT 3/8" DR 6PT 11/16"30624 SKT 3/8" DR 6PT 3/4"30626 SKT 3/8" DR 6PT 13/16"30628 SKT 3/8" DR 6PT 7/8"30630 SKT 3/8" DR 6PT 15/16"30632 SKT 3/8" DR 6PT 1"HW-1510 SKT 3/8" DR DEEP 6PT 5/16"HW-1512 SKT 3/8" DR DEEP 6PT 3/8"HW-1514 SKT 3/8" DR DEEP 6PT 7/16"HW-1516 SKT 3/8" DR DEEP 6PT 1/2"HW-1518 SKT 3/8" DR DEEP 6PT 9/16"HW-1520 SKT 3/8" DR DEEP 6PT 5/8"HW-1522 SKT 3/8" DR DEEP 6PT 11/16"



1 / 2 ” & 3 / 8 ” D R I V E T O O L S


TO

OL

BO

AR

DS



1/2" DRIVE TOOLS BD-2 (Board Only)BD-2-TL (Tools Only)BD-2-A (Board & Tools)


49978 UNIVERSAL JOINT 1/2" DR34965 ADAPTER 1/2" DR 1/2" F X 3/8" M69992 ADAPTER INCREASING 1/2" DR 1/2" F X 3/4" M49964 EXTENSION 1/2" DR 1-13/16"49966 EXTENSION 1/2" DR 5"49990 EXTENSION 1/2" DR 10"49972 EXTENSION 1/2" DR 19"49945B RATCHET 1/2" DR ROUND HEAD 49988B FLEX HANDLE 1/2" DR X 17"49946B RATCHET 1/2" DR ROUND HEAD POLISHED Q.R. 40112 SKT 1/2" DR 12PT 3/8"40114 SKT 1/2" DR 12PT 7/16"40116 SKT 1/2" DR 12PT 1/2"40118 SKT 1/2" DR 12PT 9/16"40120 SKT 1/2" DR 12PT 5/8"40122 SKT 1/2" DR 12PT 11/16"40124 SKT 1/2" DR 12PT 3/4"40126 SKT 1/2" DR 12PT 13/16"40128 SKT 1/2" DR 12PT 7/8"40130 SKT 1/2" DR 12PT 15/16"40132 SKT 1/2" DR 12PT 1"40134 SKT 1/2" DR 12PT 1-1/16"40136 SKT 1/2" DR 12PT 1-1/8"40316 SKT 1/2" DR DEEP 12PT 1/2"40318 SKT 1/2" DR DEEP 12PT 9/16"40320 SKT 1/2" DR DEEP 12PT 5/8"40322 SKT 1/2" DR DEEP 12PT 11/16"40324 SKT 1/2" DR DEEP 12PT 3/4"40326 SKT 1/2" DR DEEP 12PT 13/16"40328 SKT 1/2" DR DEEP 12PT 7/8"40330 SKT 1/2" DR DEEP 12PT 15/16"40332 SKT 1/2" DR DEEP 12PT 1"40334 SKT 1/2" DR DEEP 12PT 1-1/16"40336 SKT 1/2" DR DEEP 12PT 1-1/8"43010M SKT 1/2" DR 12PT 10MM43011M SKT 1/2" DR 12PT 11MM43012M SKT 1/2" DR 12PT 12MM43013M SKT 1/2" DR 12PT 13MM43014M SKT 1/2" DR 12PT 14MM42015M SKT 1/"2 DR 12PT 15MM42016M SKT 1/2" DR 12PT 16MM42017M SKT 1/2" DR 12PT 17MM42018M SKT 1/2" DR 12PT 18MM42019M SKT 1/2" DR 12PT 19MM42020M SKT 1/2" DR 12PT 20MM42021M SKT 1/2" DR 12PT 21MM42022M SKT 1/2" DR 12PT 22MM42023M SKT 1/2" DR 12PT 23MM42024M SKT 1/2" DR 12PT 24MM42025M SKT 1/2" DR 12PT 25MM42026M SKT 1/2" DR 12PT 26MM42027M SKT 1/2" DR 12PT 27MM42028M SKT 1/2" DR 12PT 28MM42030M SKT 1/2" DR 12PT 30MM42032M SKT 1/2" DR 12PT 32MM42036M SKT 1/2" DR 12PT 36MM44010M SKT 1/2" DR DEEP 12PT 10MM44011M SKT 1/2" DR DEEP 12PT 11MM44012M SKT 1/2" DR DEEP 12PT 12MM44013M SKT 1/2" DR DEEP 12PT 13MM44014M SKT 1/2" DR DEEP 12PT 14MM44015M SKT 1/2" DR DEEP 12PT 15MM44016M SKT 1/2" DR DEEP 12PT 16MM44017M SKT 1/2" DR DEEP 12PT 17MM44018M SKT 1/2" DR DEEP 12PT 18MM44019M SKT 1/2" DR DEEP 12PT 19MM


44020M SKT 1/2" DR DEEP 12PT 20MM44021M SKT 1/2" DR DEEP 12PT 21MM44022M SKT 1/2" DR DEEP 12PT 22MM44023M SKT 1/2" DR DEEP 12PT 23MM44024M SKT 1/2" DR DEEP 12PT 24MM44025M SKT 1/2" DR DEEP 12PT 25MM44026M SKT 1/2" DR DEEP 12PT 26MM44027M SKT 1/2" DR DEEP 12PT 27MM40326S SKT 1/2" DR SPARK PLUG 6PT 13/16"40320S SKT 1/2" DR SPARK PLUG 6PT 5/8"




TO

OL

BO

AR

DS

COMBINATION & FLARE NUT WRENCHES BD-3 (Board Only)BD-3-TL (Tools Only)BD-3-A (Board & Tools)


BW-1156FP WR COMBO POLISH 12PT 1/4"BW-1159FP WR COMBO POLISH 12PT 5/16"BW-1160FP WR COMBO POLISH 12PT 3/8"BW-1161FP WR COMBO POLISH 12PT 7/16"BW-1162FP WR COMBO POLISH 12PT 1/2"BW-1163FP WR COMBO POLISH 12PT 9/16"BW-1164FP WR COMBO POLISH 12PT 5/8"BW-1165FP WR COMBO POLISH 12PT 11/16"BW-1166FP WR COMBO POLISH 12PT 3/4"BW-1110MFP WR COMBO POLISH 12PT 10MMBW-1111MFP WR COMBO POLISH 12PT 11MMBW-1112MFP WR COMBO POLISH 12PT 12MMBW-1113MFP WR COMBO POLISH 12PT 13MMBW-1114MFP WR COMBO POLISH 12PT 14MMBW-1115MFP WR COMBO POLISH 12PT 15MMBW-1116MFP WR COMBO POLISH 12PT 16MMBW-1117MFP WR COMBO POLISH 12PT 17MMBW-1118MFP WR COMBO POLISH 12PT 18MMFN-1402P WR FLARE NUT 3/8" X 7/16"FN-1404P WR FLARE NUT 1/2" X 9/16"FN-1406P WR FLARE NUT 5/8" X11/16"FN-1410P WR FLARE NUT 3/4" X1"FN-911MP WR FLARE NUT 9MM X 11MMFN-1012MP WR FLARE NUT 10MM X 12MMFN-1314MP WR FLARE NUT 13MM X 14MMFN-1517MP WR FLARE NUT 15MM X 17MMFN-1921MP WR FLARE NUT 19MM X 21MM

OPEN END & BOX END WRENCHES BD-4 (Board Only)BD-4-TL (Tools Only)BD-4-A (Board & Tools)


BWE-67MP OPEN END WR 6MM X 7MMBWE-89MP OPEN END WR 8MM X 9MMBWE-1011MP OPEN END WR 10MM X 11MMBWE-1213MP OPEN END WR 12MM X 13MMBWE-1415MP OPEN END WR 14MM X 15MMBWE-1617MP OPEN END WR 16MM X 17MMBWE-1819MP OPEN END WR 18MM X 19MMBWE-2022MP OPEN END WR 20MM X 22MM4020P OPEN END WR 1/4" X 5/16"4723P OPEN END WR 3/8" X 7/16"4724P OPEN END WR 7/16" X 1/2"4725P OPEN END WR 1/2" X 9/16"4727P OPEN END WR 5/8" X 11/16"4728P OPEN END WR 11/16" X 3/4"4732P OPEN END WR 13/16" X 7/8"BWS-1202P LONG BOX END WR 5/16" X 3/8"BWS-1206P LONG BOX END WR 7/16" X 1/2"BWS-1210P LONG BOX END WR 1/2" X 9/16"BWS-1211P LONG BOX END WR 9/16" X 5/8"BWS-1214P LONG BOX END WR 11/16" X 3/4"BWS-1216P LONG BOX END WR 13/16" X 7/8"BWS-1218P LONG BOX END WR 15/16" X 1"




W R E N C H E S , S C R E W D R I V E R S & P L I E R S


TO

OL

BO

AR

DS





SCREWDRIVERS BD-5 (Board Only)BD-5-TL (Tools Only)BD-5-A (Board & Tools)


ST-1150S S/D 2" X 1/8" POCKET SLOTTED TIP ST-1151S S/D 2" X NO. 0PT POCKET PHILLIPS® TIP ST-1214 S/D SPARK DETECTORST-1140S S/D 1-1/2" X NO. 2PT STUBBY PHILLIPS® TIP ST-1145S S/D 1-1/2" X 1/4" STUBBY SLOTTED TIPST-1081S S/D 3" X NO. 1PT PHILLIPS® TIP ST-1082S S/D 4" X NO. 2PT PHILLIPS® TIP ST-1083S S/D 6" X NO. 3PT PHILLIPS® TIP ST-1084S S/D 10" X NO. 2PT PHILLIPS® TIP ST-1043S S/D 3" X 3/16" ELEC SLOTTED TIP ST-1046S S/D 6" X 3/16" ELEC SLOTTED TIP ST-1048S S/D 10" X 3/16" ELEC SLOTTED TIP ST-1024S S/D 4" X 1/4" SQ SHANK SLOTTED TIP ST-1026S S/D 6" X 5/16" SQ SHANK SLOTTED TIP ST-1028S S/D 8" X 3/8" SQ SHANK SLOTTED TIP ST-1032S S/D 10" X 3/8" SQ SHANK SLOTTED TIP ST-1006S S/D 6" X 5/16" SLOTTED TIP ST-1008S S/D 8" X 3/8" SLOTTED TIP ST-1010S S/D 10" X 3/8" SLOTTED TIP ST-608S S/D TORX® T8 ST-610S S/D TORX® T10 ST-615S S/D TORX® T15 St-620S S/D TORX® T20 ST-625S S/D TORX® T25 ST-627S S/D TORX® T27

PLIERS BD-6 (Board Only)BD-6-TL (Tools Only)BD-6-A (Board & Tools)


PT-1002-1 PLIERS HD SLIP JOINT 6" PT-1003-1 PLIERS SLIP JOINT COMB 8" PT-1004-1 PLIERS SLIP JOINT COMB 10" PT-1250-1 PLIERS RIBLOCK 10" PT-1248-1 PLIERS LARGE RIBLOCK 12-3/4" PT-1259 PLIERS BATTERY 7"PT-1280-1 PLIERS HOSE CLAMP 8" PT-1107 PLIERS LOCKING 7" STRAIGHT JAWPT-1110 PLIERS LOCKING 10" CURVED JAWPT-1052-1 PLIERS DIAG CUTTING 6" PT-1105 PLIERS LOCKING 5" CURVED JAWPT-1106 PLIERS LOCKING 6" LONG NOSEPT-1108-1 PLIERS LINESMAN 8" PT-1128-1 PLIERS LONGNOSE SIDECUT 6-1/2" PT-1149-1 PLIERS CURVED NEEDLE NOSE 6" PT-1050 PLIERS WIRE STRIPPER CRIMPER 8"PT-1057-1 PLIERS HD DIAG CUTTING 7" PT-1060-1 PLIERS LG DIAG CUTTING 7" PT-1178 PLIERS DUCKBILL WIRING 8"PT-1300 PLIERS STRAIGHT NOSE LONG REACH 11-1/2"PT-1310 PLIERS BENT NOSE LONG REACH 11-1/2"PT-1320 PLIERS LONG REACH CUTTER/GRIPPER 11"




TO

OL

BO

AR

DS


HW-1510 SKT 3/8" DR DEEP 6PT 5/16"HW-1512 SKT 3/8" DR DEEP 6PT 3/8"HW-1514 SKT 3/8" DR DEEP 6PT 7/16"HW-1516 SKT 3/8" DR DEEP 6PT 1/2"HW-1518 SKT 3/8" DR DEEP 6PT 9/16"HW-1520 SKT 3/8" DR DEEP 6PT 5/8"HW-1522 SKT 3/8" DR DEEP 6PT 11/16"HW-1524 SKT 3/8" DR DEEP 6PT 3/4"HW-1526 SKT 3/8" DR DEEP 6PT 13/16"HW-1528 SKT 3/8" DR DEEP 6PT 7/8"HW-1530 SKT 3/8" DR DEEP 6PT 15/16"HW-1532 SKT 3/8" DR DEEP 6PT 1"HW-1507M SKT 3/8" DR DEEP 6PT 7MMHW-1508M SKT 3/8" DR DEEP 6PT 8MMHW-1509M SKT 3/8" DR DEEP 6PT 9MMHW-1510M SKT 3/8" DR DEEP 6PT 10MMHW-1511M SKT 3/8" DR DEEP 6PT 11MMHW-1512M SKT 3/8" DR DEEP 6PT 12MMHW-1513M SKT 3/8" DR DEEP 6PT 13MMHW-1514M SKT 3/8" DR DEEP 6PT 14MMHW-1515M SKT 3/8" DR DEEP 6PT 15MMHW-1517M SKT 3/8" DR DEEP 6PT 17MMHW-1518M SKT 3/8" DR DEEP 6PT 18MMHW-1519M SKT 3/8" DR DEEP 6PT 19MM30212 SKT 3/8" DR UNIVERSAL 6PT 3/8"30224 SKT 3/8" DR UNIVERSAL 6PT 3/4"30209M SKT 3/8" DR UNIVERSAL 6PT 9MM 30210M SKT 3/8" DR UNIVERSAL 6PT 10MM 30211M SKT 3/8" DR UNIVERSAL 6PT 11MM 30212M SKT 3/8" DR UNIVERSAL 6PT 12MM 30213M SKT 3/8" DR UNIVERSAL 6PT 13MM30214M SKT 3/8" DR UNIVERSAL 6PT 14MM 30215M SKT 3/"8 DR UNIVERSAL 6PT 15MM 30214 SKT 3/8" DR UNIVERSAL 6PT 7/16"30320S SKT 3/8" DR UNIVERSAL SPARK PLUG 5/8"30216 SKT 3/8" DR UNIVERSAL 6PT 1/2"30218 SKT 3/8" DR UNIVERSAL 6PT 9/16"30220 SKT 3/8" DR UNIVERSAL 6PT 5/8"30222 SKT 3/8" DR UNIVERSAL 6PT 11/16" 30326 SKT 3/8" DR UNIVERSAL SPARK PLUG 13/16"34993 UNIVERSAL JOINT 3/8" DRHW-1520S SKT 3/8" DR SPARK PLUG 5/8"HW-1526S SKT 3/8" DR SPARK PLUG 13/16"34983 EXTENSION 3/8" DR X 19"34989 EXTENSION 3/8" DR X 1 3/4"34988 EXTENSION 3/8" DR X 3"34987 EXTENSION 3/8" DR X 6"34984 EXTENSION 3/8" DR X 11"34963 ADAPTER 3/8" DR 3/8"F X 1/4"M34966 ADAPTER 3/8" DR 3/8"F X 1/2"M34945B RATCHET 3/8" DR ROUND HEAD 34948B RATCHET 3/8" DR ROUND HEAD MINI FLEX 34946B RATCHET 3/8" DR ROUND HEAD POLISHED Q.R. 34935B RATCHET 3/8" DR ROUND HEAD FLEX 34947B RATCHET 3/8" DR BENT FLEX HANDLE 34986B FLEX HANDLE 3/8" DR X 10"

3/8" DRIVE TOOLSBD-7 (Board Only)BD-7-TL (Tools Only)BD-7-A (Board & Tools)


30608 SKT 3/8" DR 6PT 1/4"30010 SKT 3/8" DR 6PT 5/16"30612 SKT 3/8" DR 6PT 3/8"30614 SKT 3/8" DR 6PT 7/16"30616 SKT 3/8" DR 6PT 1/2"30618 SKT 3/8" DR 6PT 9/16"30620 SKT 3/8" DR 6PT 5/8"30622 SKT 3/8" DR 6PT 11/16"30624 SKT 3/8" DR 6PT 3/4"30626 SKT 3/8" DR 6PT 13/16"30628 SKT 3/8" DR 6PT 7/8"30630 SKT 3/8" DR 6PT 15/16"30632 SKT 3/8" DR 6PT 1"31108 SKT 3/8" 8PT 1/4" 31110 SKT 3/8" 8PT 5/16" 31112 SKT 3/8" 8PT 3/8" 31114 SKT 3/8" 8PT 7/16" 31116 SKT 3/8" 8PT 1/2" 32007M SKT 3/8" DR 6PT 7MM32008M SKT 3/8" DR 6PT 8MM32009M SKT 3/8" DR 6PT 9MM32010M SKT 3/8" DR 6PT 10MM32011M SKT 3/8" DR 6PT 11MM32012M SKT 3/8" DR 6PT 12MM32013M SKT 3/8" DR 6PT 13MM32014M SKT 3/8" DR 6PT 14MM32015M SKT 3/8" DR 6PT 15MM32016M SKT 3/8" DR 6PT 16MM32017M SKT 3/8" DR 6PT 17MM32018M SKT 3/8" DR 6PT 18MM32019M SKT 3/8" DR 6PT 19MM32020M SKT 3/8" DR 6PT 20MM32021M SKT 3/8" DR 6PT 21MM32022M SKT 3/8" DR 6PT 22MM



3 / 8 ” & 1 / 4 ” D R I V E T O O L S


TO

OL

BO

AR

DS





GW-1605 SKT 1/4" DR 6PT 5/32" GW-1606 SKT 1/4" DR 6PT 3/16" GW-1607 SKT 1/4" DR 6PT 7/32" GW-1608 SKT 1/4" DR 6PT 1/4" GW-1609 SKT 1/4" DR 6PT 9/32" GW-1610 SKT 1/4" DR 6PT 5/16" GW-1611 SKT 1/4" DR 6PT 11/32" GW-1612 SKT 1/4" DR 6PT 3/8" GW-1614 SKT 1/4" DR 6PT 7/16" GW-1616 SKT 1/4" DR 6PT 1/2" GW-1208 SKT 1/4" DR 8PT 1/4" GW-1210 SKT 1/4" DR 8PT 5/16" GW-1706 SKT 1/4" DR 12PT 3/16" GW-1707 SKT 1/4" DR 12PT 7/32" GW-1708 SKT 1/4" DR 12PT 1/4" GW-1709 SKT 1/4" DR 12PT 9/32" GW-1710 SKT 1/4" DR 12PT 5/16" GW-1711 SKT 1/4" DR 12PT 11/32" GW-1712 SKT 1/4" DR 12PT 3/8" GW-1714 SKT 1/4" DR 12PT 7/16" GW-1716 SKT 1/4" DR 12PT 1/2" GW-604M SKT 1/4" DR 6PT 4MM GW-645M SKT 1/4" DR 6PT 4.5MM GW-605M SKT 1/4" DR 6PT 5MM GW-655M SKT 1/4" DR 6PT 5.5MM GW-606m SKT 1/4" DR 6PT 6MM GW-607M SKT 1/4" DR 6PT 7MM GW-608M SKT 1/4" DR 6PT 8MM GW-609M SKT 1/4" DR 6PT 9MM GW-610M SKT 1/4" DR 6PT 10MM GW-611M SKT 1/4" DR 6PT 11MM GW-612M SKT 1/4" DR 6PT 12MM GW-613M SKT 1/4" DR 6PT 13MM GW-1506 SKT 1/4" DR DEEP 6PT 3/16"GW-1507 SKT 1/4" DR DEEP 6PT 7/32" GW-1508 SKT 1/4" DR DEEP 6PT 1/4" GW-1509 SKT 1/4" DR DEEP 6PT 9/32" GW-1510 SKT 1/4" DR DEEP 6PT 5/16"GW-1511 SKT 1/4" DR DEEP 6PT 11/32" GW-1512 SKT 1/4" DR DEEP 6PT 3/8" GW-1514 SKT 1/4" DR DEEP 6PT 7/16" GW-1516 SKT 1/4" DR DEEP 6PT 1/2" GW-504M SKT 1/4" DR DEEP 6PT 4MM GW-505M SKT 1/4" DR DEEP 6PT 5MM GW-506M SKT 1/4" DR DEEP 6PT 6MM GW-507M SKT 1/4" DR DEEP 6PT 7MM GW-508M SKT 1/4" DR DEEP 6PT 8MM GW-509M SKT 1/4" DR DEEP 6PT 9MM GW-510M SKT 1/4" DR DEEP 6PT 10MM GW-511M SKT 1/4" DR DEEP 6PT 11MM GW-512M SKT 1/4" DR DEEP 6PT 12MM GW-513M SKT 1/4" DR DEEP 6PT 13MM GW-9898 EXTENSION 1/4" DR X 3" GW-9899 EXTENSION 1/4" DR X 6" 34960 ADAPTER 1/4" DR 1/4" F X 3/8" M GW-9550 SPINNER HANDLE 1/4" DR Gw-9545 SPINNER FLEX HANDLE 1/4" DR GW-9578 UNIVERSAL JOINT 1/4" DR GW-9749B FLEX HANDLE 1/4" DR X 6" GW-9945B RATCHET 1/4" DR ROUND HEAD GW-9935B RATCHET 1/4" DR ROUND HEAD FLEX




TO

OL

BO

AR

DS

HAMMERSBD-9 (Board Only)BD-9-TL (Tools Only)BD-9-A (Board & Tools)


HT-1005-1 HAMMER BALL PEIN 16 OZHT-1007-1 HAMMER BALL PEIN 24 OZHT-1008-1 HAMMER BALL PEIN 32 OZHT-1453 HAMMER SOFT FACE 20 OZHT-1452T HAMMER REPLACEMENT TIP57-530 COMPO-CAST® 10 OZ57-531 COMPO-CAST® 18 OZ57-532 COMPO-CAST® 21 OZ57-522 RUBBER MALLET 18 OZ



60028 SKT 3/4" DR 12PT 7/8"60030 SKT 3/8" DR 12PT 15/16"60032 SKT 3/4" DR 12PT 1"60034 SKT 3/4" DR 12PT 1-1/16"60036 SKT 3/4" DR 12PT 1-1/8"60038 SKT 3/4" 12PT 1-3/16"60040 SKT 3/4" DR 12PT 1-1/4"60042 SKT 3/4" DR 12PT 1-5/16"60044 SKT 3/4" DR 12PT 1-3/8"60046 SKT 3/4" DR 12PT 1-7/16"60048 SKT 3/4" DR 12PT 1-1/2"60050 SKT 3/4" DR 12PT 1-9/16"60052 SKT 3/4" DR 12PT 1-5/8"60054 SKT 3/4" DR 12PT 1-11/16"60056 SKT 3/4" DR 12PT 1-3/4"60058 SKT 3/4" DR 12PT 1-13/16"60060 SKT 3/4" DR 12PT 1-7/8"60064 SKT 3/4" DR 12PT 2"60068 SKT 3/4" DR 12PT 2-1/8"60070 SKT 3/4" DR 12PT 2-3/16"60072 SKT 3/4" DR 12PT 2-1/4"60076 SKT 3/4" DR 12PT 2-3/8"69993 EXTENSION 3/4" DR 4"69995 EXTENSION 3/4" DR 8"69994 EXTENSION 3/4" DR 16"69997 SLIDING TEE HANDLE 3/4" DR X 18"69998 FLEX HANDLE 3/4" DR X 19"69945B RATCHET 3/4" DR ROUND HEAD J5853 3/4" F x 1" M DRIVE ADAPTER49991 ADAPTER REDUCING 3/4" F -1/2"




H A M M E R S , 3 / 4 ” D R I V E & 3 / 8 ” I M P A C T D R I V E T O O L S


TO

OL

BO

AR

DS



3/8" DRIVE IMPACT TOOLSBD-12 (Board Only)BD-12-TL (Tools Only)BD-12-A (Board & Tools)


U-1508 SKT 3/8" DR IMPACT 6PT 1/4"U-1510 SKT 3/8" DR IMPACT 6PT 5/16"U-1512 SKT 3/8" DR IMPACT 6PT 3/8"U-1514 SKT 3/8" DR IMPACT 6PT 7/16"U-1516 SKT 3/8" DR IMPACT 6PT 1/2"U-1518 SKT 3/8" DR IMPACT 6PT 9/16"U-1520 SKT 3/8" DR IMPACT 6PT 5/8"U-1522 SKT 3/8" DR IMPACT 6PT 11/16"U-1524 SKT 3/8" DR IMPACT 6PT 3/4" U-1508M SKT 3/8" DR IMPACT 6PT 8MM U-1509M SKT 3/8" DR IMPACT 6PT 9MM U-1510M SKT 3/8" DR IMPACT 6PT 10MM U-1512M SKT 3/8" DR IMPACT 6PT 12MM U-1513M SKT 3/8" DR IMPACT 6PT 13MM U-1514M SKT 3/8" DR IMPACT 6PT 14MM U-1515M SKT 3/8" DR IMPACT 6PT 15MM U-1517M SKT 3/8" DR IMPACT 6PT 17MM U-1518M SKT 3/8" DR IMPACT 6PT 18MM U-1519M SKT 3/8" DR IMPACT 6PT 19MM U-1612 SKT 3/8" DR IMPACT DEEP 6PT 3/8" U-1614 SKT 3/8" DR IMPACT DEEP 6PT 7/16" U-1616 SKT 3/8" DR IMPACT DEEP 6PT 1/2"U-1618 SKT 3/8" DR IMPACT DEEP 6PT 9/16" U-1620 SKT 3/8" DR IMPACT DEEP 6PT 5/8" U-1622 SKT 3/8" DR IMPACT DEEP 6PT 11/16"U-1624 SKT 3/8" DR IMPACT DEEP 6PT 3/4" U-1610 SKT 3/8" DR IMPACT DEEP 6PT 15/16" U-1608M SKT 3/8" DR IMPACT 6PT 8MM U-1609M SKT 3/8" DR IMPACT 6PT 9MM U-1610M SKT 3/8" DR IMPACT 6PT 10MM U-1611M SKT 3/8" DR IMPACT 6PT 11MM U-1612M SKT 3/8" DR IMPACT 6PT 12MM U-1613M SKT 3/8" DR IMPACT 6PT 13MM U-1614M SKT 3/8" DR IMPACT 6PT 14MM U-1615M SKT 3/8" DR IMPACT 6PT 15MM U-1616M SKT 3/8" DR IMPACT 6PT 16MM U-1617M SKT 3/8" DR IMPACT 6PT 17MM U-1618M SKT 3/8" DR IMPACT 6PT 18MM U-1619M SKT 3/8" DR IMPACT 6PT 19MM




TO

OL

BO

AR

DS

1/2" DRIVE IMPACT TOOLS BD-14 (Board Only)BD-14-TL (Tools Only)BD-14-A (Board & Tools)


49976 UNIVERSAL JOINT IMPACT 1/2" DRUW-24 EXTENSION IMPACT 1/2" DR X 5"UW-30 EXTENSION IMPACT 1/2" DR X 2-5/8"UW-25 EXTENSION IMPACT 1/2" DR X 10"UW-1612 SKT 1/2" DR IMPACT 6PT 3/8"UW-1614 SKT 1/2" DR IMPACT 6PT 7/16"UW-1616 SKT 1/2" DR IMPACT 6PT 1/2"UW-1618 SKT 1/2" DR IMPACT 6PT 9/16"UW-1620 SKT 1/2" DR IMPACT 6PT 5/8"UW-1622 SKT 1/2" DR IMPACT 6PT 11/16"UW-1624 SKT 1/2" DR IMPACT 6PT 3/4"UW-1626 SKT 1/2" DR IMPACT 6PT 13/16"UW-1628 SKT 1/2" DR IMPACT 6PT 7/8"UW-1630 SKT 1/2" DR IMPACT 6PT 15/16"UW-1632 SKT 1/2" DR IMPACT 6PT 1"UW-1634 SKT 1/2" DR IMPACT 6PT 1-1/16"UW-1636 SKT 1/2" DR IMPACT 6PT 1-1/8"UW-1638 SKT 1/2" DR IMPACT 6PT 1-3/16"UW-1640 SKT 1/2" DR IMPACT 6PT 1-1/4"UW-1512 SKT 1/2" DR IMPACT DEEP 6PT 3/8"UW-1514 SKT 1/2" DR IMPACT DEEP 6PT 7/16"UW-1516 SKT 1/2" DR IMPACT DEEP 6PT 1/2"UW-1518 SKT 1/2" DR IMPACT DEEP 6PT 9/16"UW-1520 SKT 1/2" DR IMPACT DEEP 6PT 5/8"UW-1522 SKT 1/2" DR IMPACT DEEP 6PT 11/16"UW-1524 SKT 1/2" DR IMPACT DEEP 6PT 3/4"UW-1526 SKT 1/2" DR IMPACT DEEP 6PT 13/16"UW-1528 SKT 1/2" DR IMPACT DEEP 6PT 7/8"UW-1530 SKT 1/2" DR IMPACT DEEP 6PT 15/16"UW-1532 SKT 1/2" DR IMPACT DEEP 6PT 1"UW-1534 SKT 1/2" DR IMPACT DEEP 6PT 1-1/16"UW-1536 SKT 1/2" DR IMPACT DEEP 6PT 1-1/8"UW-610M SKT 1/2" DR IMPACT 6PT 10MMUW-611M SKT 1/2" DR IMPACT 6PT 11MMUW-612M SKT 1/2" DR IMPACT 6PT 12MMUW-613M SKT 1/2" DR IMPACT 6PT 13MMUW-614M SKT 1/2" DR IMPACT 6PT 14MMUW-615M SKT 1/2" DR IMPACT 6PT 15MMUW-616M SKT 1/2" DR IMPACT 6PT 16MMUW-617M SKT 1/2" DR IMPACT 6PT 17MMUW-618M SKT 1/2" DR IMPACT 6PT 18MMUW-619M SKT 1/2" DR IMPACT 6PT 19MMUW-621M SKT 1/2" DR IMPACT 6PT 21MMUW-622M SKT 1/2" DR IMPACT 6PT 22MMUW-624M SKT 1/2" DR IMPACT 6PT 24MMUW-627M SKT 1/2" DR IMPACT 6PT 27MMUW-510M SKT 1/2" DR IMPACT DEEP 6PT 10MM UW-511M SKT 1/2" DR IMPACT DEEP 6PT 11MM UW-512M SKT 1/2" DR IMPACT DEEP 6PT 12MM UW-513M SKT 1/2" DR IMPACT DEEP 6PT 13MM UW-514M SKT 1/2" DR IMPACT DEEP 6PT 14MM UW-515M SKT 1/2" DR IMPACT DEEP 6PT 15MM UW-516M SKT 1/2" DR IMPACT DEEP 6PT 16MM UW-517M SKT 1/2" DR IMPACT DEEP 6PT 17MM UW-518M SKT 1/2" DR IMPACT DEEP 6PT 18MM UW-519M SKT 1/2" DR IMPACT DEEP 6PT 19MM UW-520M SKT 1/2" DR IMPACT DEEP 6PT 20MM UW-521M SKT 1/2" DR IMPACT DEEP 6PT 21MM UW-522M SKT 1/2" DR IMPACT DEEP 6PT 22MM UW-524M SKT 1/2" DR IMPACT DEEP 6PT 24MM UW-526M SKT 1/2" DR IMPACT DEEP 6PT 26MM UW-527M SKT 1/2" DR IMPACT DEEP 6PT 27MM UW-1500 SKT 1/2" DR IMPACT WHEEL LUGUWP-430M SKT 1/2" DR AXLE NUT DEEP 6PT 30MMUWP-436M SKT 1/2" DR AXLE NUT DEEP 6PT 36MM



1 / 2 ” , 3 / 4 ” D R I V E I M P A C T T O O L S & P U L L E R S


TO

OL

BO

AR

DS



PULLERSBD-15 (Board Only)BD-15-TL (Tools Only)BD-15-A (Board & Tools)


ET-1005 PULLER MIDGET GEARET-1007 PULLER 6 REVERSABLE GEARET-1010 PULLER 9 REVERSIBLE GEARET-1068A PULLER PILOT BEARINGET-1071A PULLER BATTERY TERMINALET-1205 PULLER TAPERED BEARING 2-1/4"ET-1207 PULLER TAPERED BEARING 4-1/2"ET-1322 PULLER GEAR AND PULLEYET-1328A PULLER STEERING WHEELET-1710 PULLER BODY DENT

3/4" DRIVE IMPACT TOOLS BD-16 (Board Only)BD-16-TL (Tools Only)BD-16-A (Board & Tools)


UW-2424 SKT 3/4" DR IMPACT 6PT 3/4" UW-2426 SKT 3/4" DR IMPACT 6PT 13/16"UW-2428 SKT 3/4" DR IMPACT 6PT 7/8"UW-2430 SKT 3/4" DR IMPACT 6PT 15/16"UW-2432 SKT 3/4" DR IMPACT 6PT 1"UW-2434 SKT 3/4" DR IMPACT 6PT 1-1/16"UW-2436 SKT 3/4" DR IMPACT 6PT 1-1/8"UW-2438 SKT 3/4" DR IMPACT 6PT 1-3/16"UW-2440 SKT 3/4" DR IMPACT 6PT 1-1/4"UW-2442 SKT 3/4" DR IMPACT 6PT 1-5/16"UW-2444 SKT 3/4" DR IMPACT 6PT 1-3/8"UW-2446 SKT 3/4" DR IMPACT 6PT 1-7/16"UW-2448 SKT 3/4" DR IMPACT 6PT 1-1/2"UW-2624 SKT 3/4" DR IMPACT DEEP 6PT 3/4" UW-2626 SKT 3/4" DR IMPACT DEEP 6PT 13/16"UW-2628 SKT 3/4" DR IMPACT DEEP 6PT 7/8"UW-2630 SKT 3/4" DR IMPACT DEEP 6PT 15/16"UW-2632 SKT 3/4" DR IMPACT DEEP 6PT 1"UW-2634 SKT 3/4" DR IMPACT DEEP 6PT 1-1/16"UW-2636 SKT 3/4" DR IMPACT DEEP 6PT 1-1/8"UW-2638 SKT 3/4" DR IMPACT DEEP 6PT 1-3/16"UW-2640 SKT 3/4" DR IMPACT DEEP 6PT 1-1/4"UW-2642 SKT 3/4" DR IMPACT DEEP 6PT 1-5/16"UW-2644 SKT 3/4" DR IMPACT DEEP 6PT 1-3/8"UW-2646 SKT 3/4" DR IMPACT DEEP 6PT 1-7/16"UW-2648 SKT 3/4" DR IMPACT DEEP 6PT 1-1/2"





TO

OL

BO

AR

DS

NUT DRIVERS BD-18 (Board Only)BD-18-TL (Tools Only)BD-18-A (Board & Tools)


ST-800 NUT DRIVER 3/16" ST-803 NUT DRIVER 1/4" ST-806 NUT DRIVER 5/16" ST-809 NUT DRIVER 11/32" ST-812 NUT DRIVER 3/8" ST-815 NUT DRIVER 7/16" ST-818 NUT DRIVER 1/2" ST-905M NUT DRIVER 5MMST-955M NUT DRIVER 5.5MMST-907M NUT DRIVER 7MMST-908M NUT DRIVER 8MMST-909M NUT DRIVER 9MMST-910M NUT DRIVER 10MMST-911M NUT DRIVER 11MMST-828 SET NUT DRIVER STANDARD 8 PCST-829M SET NUT DRIVER METRIC 9 PC



N U T D R I V E R S & 1 / 4 ” , 3 / 8 ” , 1 / 2 ” D R I V E T O O L S


TO

OL

BO

AR

DS



1/4", 3/8", 1/2" DRIVE TOOLS BD-21 (Board Only)BD-21-TL (Tools Only)BD-21-A (Board & Tools)


GW-604M SKT 1/4" DR 6PT 4MM GW-605M SKT 1/4" DR 6PT 5MM GW-606m SKT 1/4" DR 6PT 6MM GW-607M SKT 1/4" DR 6PT 7MM GW-608M SKT 1/4" DR 6PT 8MM GW-609M SKT 1/4" DR 6PT 9MM GW-610M SKT 1/4" DR 6PT 10MM GW-611M SKT 1/4" DR 6PT 11MM GW-612M SKT 1/4" DR 6PT 12MM GW-613M SKT 1/4" DR 6PT 13MM GW-1605 SKT 1/4" DR 6PT 5/32" GW-1606 SKT 1/4" DR 6PT 3/16" GW-1607 SKT 1/4" DR 6PT 7/32" GW-1608 SKT 1/4" DR 6PT 1/4" GW-1609 SKT 1/4" DR 6PT 9/32" GW-1610 SKT 1/4" DR 6PT 5/16" GW-1611 SKT 1/4" DR 6PT 11/32" GW-1612 SKT 1/4" DR 6PT 3/8" GW-1614 SKT 1/4" DR 6PT 7/16" GW-1616 SKT 1/4" DR 6PT 1/2" GW-504M SKT 1/4" DR DEEP 6PT 4MM GW-505M SKT 1/4" DR DEEP 6PT 5MM GW-506M SKT 1/4" DR DEEP 6PT 6MM GW-507M SKT 1/4" DR DEEP 6PT 7MM GW-508M SKT 1/4" DR DEEP 6PT 8MM GW-509M SKT 1/4" DR DEEP 6PT 9MMGW-510M SKT 1/4" DR DEEP 6PT 10MM GW-511M SKT 1/4" DR DEEP 6PT 11MM GW-512M SKT 1/4" DR DEEP 6PT 12MM GW-513M SKT 1/4" DR DEEP 6PT 13MMGW-1506 SKT 1/4" DR DEEP 6PT 3/16" GW-1507 SKT 1/4" DR DEEP 6PT 7/32" GW-1508 SKT 1/4" DR DEEP 6PT 1/4" GW-1509 SKT 1/4" DR DEEP 6PT 9/32" GW-1510 SKT 1/4" DR DEEP 6PT 5/16"GW-1511 SKT 1/4" DR DEEP 6PT 11/32" GW-1512 SKT 1/4" DR DEEP 6PT 3/8" GW-1514 SKT 1/4" DR DEEP 6PT 7/16" GW-1516 SKT 1/4" DR DEEP 6PT 1/2" GW-9898 EXTENSION 1/4" DR X 3" GW-9899 EXTENSION 1/4" DR X 6" 34960 ADAPTER 1/4" DR 1/4" F X 3/8" M GW-9945B RATCHET 1/4" DR ROUND HEAD GW-9550 SPINNER HANDLE 1/4" DR GW-9578 UNIVERSAL JOINT 1/4" DR32010M SKT 3/8" DR 6PT 10MM 32011M SKT 3/8" DR 6PT 11MM 32012M SKT 3/8" DR 6PT 12MM 32013M SKT 3/8" DR 6PT 13MM 32014M SKT 3/8" DR 6PT 14MM 32015M SKT 3/8" DR 6PT 15MM32016M SKT 3/8" DR 6PT 16MM 30608 SKT 3/8" DR 6PT 1/4" 30010 SKT 3/8" DR 6PT 5/16" 30612 SKT 3/8" DR 6PT 3/8" 30614 SKT 3/8" DR 6PT 7/16" 30616 SKT 3/8" DR 6PT 1/2" 30618 SKT 3/8" DR 6PT 9/16" 30620 SKT 3/8" DR 6PT 5/8" 30622 SKT 3/8" DR 6PT 11/16" 30624 SKT 3/8" DR 6PT 3/4" HW-1507M SKT 3/8" DR DEEP 6PT 7MM HW-1508M SKT 3/8" DR DEEP 6PT 8MM HW-1509M SKT 3/8" DR DEEP 6PT 9MM HW-1510M SKT 3/8" DR DEEP 6PT 10MM HW-1511M SKT 3/8" DR DEEP 6PT 11MM HW-1512M SKT 3/8" DR DEEP 6PT 12MMHW-1513M SKT 3/8" DR DEEP 6PT 13MM HW-1510 SKT 3/8" DR DEEP 6PT 5/16"


HW-1512 SKT 3/8" DR DEEP 6PT 3/8" HW-1514 SKT 3/8" DR DEEP 6PT 7/16" HW-1516 SKT 3/8" DR DEEP 6PT 1/2 HW-1518 SKT 3/8" DR DEEP 6PT 9/16 HW-1520 SKT 3/8" DR DEEP 6PT 5/8" HW-1522 SKT 3/8" DR DEEP 6PT 11/16" HW-1524 SKT 3/8" DR DEEP 6PT 3/4" HW-1520S SKT 3/8" DR SPARK PLUG 5/8" HW-1526S SKT 3/8" DR SPARK PLUG 13/16" 34989 EXTENSION 3/8" DR X 1-3/4" 34988 EXTENSION 3/8" DR X 3" 34984 EXTENSION 3/8" DR X 11 34963 ADAPTER 3/8" DR 3/8" F X 1/4" M 34966 ADAPTER 3/8" DR 3/8" F X 1/2" M 34993 UNIVERSAL JOINT 3/8" DR 34945B RATCHET 3/8" DR ROUND HEAD 40612 SKT 1/2" DR 6PT 3/8" 40614 SKT 1/2" DR 6PT 7/16" 40616 SKT 1/2" DR 6PT 1/2" 40618 SKT 1/2" DR 6PT 9/16" 40620 SKT 1/2" DR 6PT 5/8" 40622 SKT 1/2" DR 6PT 11/16" 40624 SKT 1/2" DR 6PT 3/4" 40626 SKT 1/2" DR 6PT 13/16" 40628 SKT 1/2" DR 6PT 7/8" 40630 SKT 1/2" DR 6PT 15/16 40632 SKT 1/2" DR 6PT 1 40634 SKT 1/2" DR 6PT 1-1/16" 40636 SKT 1/2" DR 6PT 1-1/8"43013M SKT 1/2" DR 12PT 13MM 43014M SKT 1/2" DR 12PT 14MM 42015M SKT 1/2" DR 12PT 15MM 42018M SKT 1/2" DR 12PT 18MM 42016M SKT 1/2" DR 12PT 16MM 42017M SKT 1/2" DR 12PT 17MM 42019M SKT 1/2" DR 12PT 19MM 42020M SKT 1/2" DR 12PT 20MM 42021M SKT 1/2" DR 12PT 21MM 42022M SKT 1/2" DR 12PT 22MM 42024M SKT 1/2 "DR 12PT 24MM 42027M SKT 1/2" DR 12PT 27MM 42030M SKT 1/2" DR 12PT 30MM 34987 EXTENSION 3/8" DR X 6" 49966 EXTENSION 1/2" DR 5 49990 EXTENSION 1/2" DR 10 34965 ADAPTER 1/2" DR 1/2" F X 3/8" M 49978 UNIVERSAL JOINT 1/2" DR 49945B RATCHET 1/2" DR ROUND HEAD



Phillips® is a registered trademark of Phillips Screw Co.Visit us at...www.stanleyproto.com194

TO

OL

BO

AR

DS

SCREWDRIVERS & PLIERSBD-23 (Board Only)BD-23-TL (Tools Only)BD-23-A (Board & Tools)


AW-1006-1 WRENCH ADJUSTABLE 6" AW-1010-1 WRENCH ADJUSTABLE 10" ST-1214 S/D SPARK DETECTOR ST-1151S S/D 2" X NO. 0PT POCKET PHILLIPS® TIP ST-1150S S/D 2" X 1/8" POCKET SLOTTED TIP ST-1043S S/D 3" X 3/16" ELEC SLOTTED TIP ST-1046S S/D 6" X 3/16" ELEC SLOTTED TIP ST-1081S S/D 3 X NO. 1PT PHILLIPS® TIP ST-1082S S/D 4" X NO. 2PT PHILLIPS® TIP ST-1004S S/D 4" X 1/4" SLOTTED TIP ST-1006S S/D 6" X 5/16" SLOTTED TIP ST-1008S S/D 8" X 3/8" SLOTTED TIP ST-1024S S/D 4" X 1/4" SQ SHANK SLOTTED TIP ST-1026S S/D 6" X 5/16" SQ SHANK SLOTTED TIP ST-1028S S/D 8" X 3/8" SQ SHANK SLOTTED TIP ST-1032S S/D 10" X 3/8" SQ SHANK SLOTTED TIP ST-1140S S/D 1-1/2" X NO. 2PT STUBBY PHILLIPS® TIP ST-1145S S/D 1-1/2" X 1/4" STUBBY SLOTTED TIP PT-1002-1 PLIERS HD SLIP JOINT 6" USA PT-1003-1 PLIERS SLIP JOINT COMB 8" USA PT-1052-1 PLIERS DIAG CUTTING 6" USA PT-1057-1 PLIERS HD DIAG CUTTING 7" USA PT-1107 PLIERS LOCKING 7" STRAIGHT JAW PT-1128-1 PLIERS LONGNOSE SIDECUT 6-1/2" USA PT-1250-1 PLIERS RIBLOCK 10" USA

COMBINATION FULL POLISH WRENCHESBD-24 (Board Only)BD-24-TL (Tools Only)BD-24-A (Board & Tools)


BW-1156FP WR COMBO POLISH 12PT 1/4"BW-1159FP WR COMBO POLISH 12PT 5/16"BW-1160FP WR COMBO POLISH 12PT 3/8"BW-1161FP WR COMBO POLISH 12PT 7/16"BW-1162FP WR COMBO POLISH 12PT 1/2"BW-1163FP WR COMBO POLISH 12PT 9/16"BW-1164FP WR COMBO POLISH 12PT 5/8"BW-1165FP WR COMBO POLISH 12PT 11/16"BW-1166FP WR COMBO POLISH 12PT 3/4"BW-1167AFP WR COMBO POLISH 12PT 13/16"BW-1167FP WR COMBO POLISH 12PT 7/8"BW-1168FP WR COMBO POLISH 12PT 15/16"BW-1170FP WR COMBO POLISH 12PT 1"BW-1171FP WR COMBO POLISH 12PT 1-1/16"BW-1106MFP WR COMBO POLISH 12PT 6MMBW-1107MFP WR COMBO POLISH 12PT 7MMBW-1108MFP WR COMBO POLISH 12PT 8MMBW-1109MFP WR COMBO POLISH 12PT 9MMBW-1110MFP WR COMBO POLISH 12PT 10MMBW-1111MFP WR COMBO POLISH 12PT 11MMBW-1112MFP WR COMBO POLISH 12PT 12MMBW-1113MFP WR COMBO POLISH 12PT 13MMBW-1114MFP WR COMBO POLISH 12PT 14MMBW-1115MFP WR COMBO POLISH 12PT 15MMBW-1116MFP WR COMBO POLISH 12PT 16MMBW-1117MFP WR COMBO POLISH 12PT 17MMBW-1118MFP WR COMBO POLISH 12PT 18MMBW-1119MFP WR COMBO POLISH 12PT 19MMBW-1120MFP WR COMBO POLISH 12PT 20MMBW-1121MFP WR COMBO POLISH 12PT 21MMBW-1122MFP WR COMBO POLISH 12PT 22MM




S C R E W D R I V E R S / P L I E R S , C O M B I N A T I O N F U L L P O L I S H ,S P E C I A L T Y, A D J U S T A B L E W R E N C H E S & P L I E R S ,


TO

OL

BO

AR

DS



SPECIALTY WRENCHESBD-25 (Board Only)BD-25-TL (Tools Only)BD-25-A (Board & Tools)


FN-1402P WR FLARE NUT 3/8" X 7/16"FN-1404P WR FLARE NUT 1/2" X 9/16"FN-1406P WR FLARE NUT 5/8" X 11/16"FN-1410P WR FLARE NUT 3/4" X 1"FN-1012MP WR FLARE NUT 10MM X 12MMFN-1314MP WR FLARE NUT 13MM X 14MMFN-1517MP WR FLARE NUT 15MM X 17MMFN-1921MP WR FLARE NUT 19MM X 21MMBCF-12 WR CROWFOOT 3/8" DR 3/8"BCF-14 WR CROWFOOT 3/8" DR 7/16"BCF-16 WR CROWFOOT 3/8" DR 1/2"BCF-18 WR CROWFOOT 3/8" DR 9/16"BCF-20 WR CROWFOOT 3/8" DR 5/8"BCF-22 WR CROWFOOT 3/8" DR 11/16"BCF-24 WR CROWFOOT 3/8" DR 3/4"BCF-26 WR CROWFOOT 3/8" DR 13/16"BCF-28 WR CROWFOOT 3/8" DR 7/8"BCF-32 WR CROWFOOT 3/8" DR 1BCF-10M WR CROWFOOT 3/8" DR 10MMBCF-11M WR CROWFOOT 3/8" DR 11MMBCF-12M WR CROWFOOT 3/8" DR 12MMBCF-13M WR CROWFOOT 3/8" DR 13MMBCF-14M WR CROWFOOT 3/8" DR 14MMBCF-15M WR CROWFOOT 3/8" DR 15MMBCF-17M WR CROWFOOT 3/8" DR 17MMBCF-19M WR CROWFOOT 3/8" DR 19MMBCF-21M WR CROWFOOT 3/8" DR 21MMBCF-22M WR CROWFOOT 3/8" DR 22MMZW-1045A-A WR RATCHETING A/C 1/4" X 3/16" SQ 1/2" X 9/16" HEXBW-1410 WR REV RATCHETING BOX 5/16"BW-1412 WR REV RATCHETING BOX 3/8"BW-1414 WR REV RATCHETING BOX 7/16"BW-1416 WR REV RATCHETING BOX 1/2"BW-1418 WR REV RATCHETING BOX 9/16"BW-1420 WR REV RATCHETING BOX 5/8"BW-1422 WR REV RATCHETING BOX 11/16"BW-1424 WR REV RATCHETING BOX 3/4"BW-1458 WR REV RATCHETING BOX 8MMBW-1459 WR REV RATCHETING BOX 9MMBW-1460 WR REV RATCHETING BOX 10MMBW-1461 WR REV RATCHETING BOX 11MMBW-1462 WR REV RATCHETING BOX 12MMBW-1463 WR REV RATCHETING BOX 13MMBW-1464 WR REV RATCHETING BOX 14MMBW-1465 WR REV RATCHETING BOX 15MM

ADJUSTABLE WRENCHES & PLIERSBD-26 (Board Only)BD-26-TL (Tools Only)BD-26-A (Board & Tools)


AW-1004-1 WRENCH ADJUSTABLE 4"AW-1006-1 WRENCH ADJUSTABLE 6"AW-1008-1 WRENCH ADJUSTABLE 8"AW-1010-1 WRENCH ADJUSTABLE 10"AW-1012-1 WRENCH ADJUSTABLE 12"AW-1015-1 WRENCH ADJUSTABLE 15"PT-3000 SET PLIERS MINI LONG REACH 4 PC PT-1105 PLIERS LOCKING 5" CURVED JAWPT-1106 PLIERS LOCKING 6" LONG NOSEPT-1107 PLIERS LOCKING 7" STRAIGHT JAWPT-1110 PLIERS LOCKING 10" CURVED JAWAW-1351 WRENCH UNIVERSAL CHAIN





TO

OL

BO

AR

DS

ADJUSTABLE WRENCHESBD-27 (Board Only)BD-27-TL (Tools Only)BD-27-A (Board & Tools)


AW-1004-1 WRENCH ADJUSTABLE 4"AW-1006-1 WRENCH ADJUSTABLE 6"AW-1008-1 WRENCH ADJUSTABLE 8"AW-1010-1 WRENCH ADJUSTABLE 10"AW-1012-1 WRENCH ADJUSTABLE 12"AW-1015-1 WRENCH ADJUSTABLE 15"AW-1351 WRENCH UNIVERSAL CHAIN

PUNCHES & CHISELS BD-28 (Board Only)BD-28-TL (Tools Only)BD-28-A (Board & Tools)


CT-1003 CHISEL COLD 5/16" X 3/8" X 5-1/4"CT-1004 CHISEL COLD 3/8" X 7/16" X 5-1/2"CT-1006 CHISEL COLD 1/2" X 5/8" X 6-1/2"CT-1008 CHISEL COLD 5/8" X 3/4" X 7"CT-1010 CHISEL COLD 3/4" X 7/8" X 7-1/2"CT-1108 CHISEL LONG COLD 5/8" X 3/4" X 12"CT-1110 CHISEL LONG COLD 3/4" X 7/8" X 12"CT-1204 CHISEL ROUND NOSE 3/8" X 1/4" X 5-1/2"CT-1254 CHISEL DIAMOND POINT 3/8" X 3/16" X 5"CT-1303 PUNCH CENTER 3/8 X 5/32" X 5"CT-1304 PUNCH CENTER 7/16" X 3/16" X 5-1/2"CT-1306 PUNCH CENTER 1/2" X 1/4" X 6"CT-1314 PUNCH SCRIBING 3/8" X 5/32" X 5"CT-1404 PUNCH HAND 3/8" X 3/16" X 5"CT-1453 PUNCH PIN 5/16" X 1/8" X 5"CT-1454 PUNCH PIN 5/16" X 5/32" X 5"CT-1456 PUNCH PIN 5/16" X 3/16" X 5"CT-1464 PUNCH PIN 3/8" X 1/4" X 7"CT-1466 PUNCH PIN 1/2" X 5/16" X 7"CT-1509 PUNCH ALIGNING 5/8" X 1/4" X 11"CT-1554 PUNCH TAPER 1/2" X 5/32" X 8 1/2"CT-1556 PUNCH TAPER 1/2" X 3/16" X 9"CT-1558 PUNCH TAPER 5/8" X 5/16" X 11"CT-1606 BAR PINCH 1/2" X 5/8" X 14"CT-1610 BAR PINCH 5/8" X 3/4" X 16"CT-1617 BAR PRY 1/2" X 1-15/16" X 15"CT-1620 BAR PRY 5/8" X 2-5/8" X 18"




A D J U S T A B L E W R E N C H E S , P U N C H E S & C H I S E L S ,1 / 4 ” , 3 / 8 ” D R I V E B I T S & T O R X D R I V E R S ,


TO

OL

BO

AR

DS



1/4" & 3/8" DRIVE BITS & TORX DRIVERS BD-29 (Board Only)BD-29-TL (Tools Only)BD-29-A (Board & Tools)


TS-1209 SKT 1/4" DR INTERNAL TORX® T9TS-1210 SKT 1/4" DR INTERNAL TORX® T10TS-1215 SKT 1/4" DR INTERNAL TORX® T15TS-1220 SKT 1/4" DR INTERNAL TORX® T20TS-1225 SKT 1/4" DR INTERNAL TORX® T25TS-1227 SKT 1/4" DR INTERNAL TORX® T27TS-1230 SKT 1/4" DR INTERNAL TORX® T30TS-2204 SKT 1/4" DR EXTERNAL TORX® E4TS-2205 SKT 1/4" DR EXTERNAL TORX® E5TS-2206 SKT 1/4" DR EXTERNAL TORX® E6TS-2207 SKT 1/4" DR EXTERNAL TORX® E7TS-2208 SKT 1/4" DR EXTERNAL TORX® E8HW-9504 S/D BIT 3/8" DR 3/16" BLADEHW-9505 S/D BIT 3/8" DR 1/4" BLADEHW-9506 S/D BIT 3/8" DR 5/16" BLADEHW-9450 S/D BIT 3/8" DR PHILLIPS® #1HW-9451 S/D BIT 3/8" DR PHILLIPS® #2HW-9452 S/D BIT 3/8" DR PHILLIPS® #3HW-9453 S/D BIT 3/8" DR PHILLIPS® #4HW-9442 SKT BIT 3/8" DR HEX 1/8"HW-9443 SKT BIT 3/8" DR HEX 9/64"HW-9444 SKT BIT 3/8" DR HEX 5/32"HW-9449 SKT BIT 3/8" DR HEX 3/16"HW-9448 SKT BIT 3/8" DR HEX 7/32"HW-9447 SKT BIT 3/8" DR HEX 1/4"HW-9446 SKT BIT 3/8" DR HEX 5/16"HW-9445 SKT BIT 3/8" DR HEX 3/8"HW-9404M SKT BIT 3/8" DR HEX 4MMHW-9405M SKT BIT 3/8" DR HEX 5MMHW-9406M SKT BIT 3/8" DR HEX 6MMHW-9407M SKT BIT 3/8" DR HEX 7MMHW-9408M SKT BIT 3/8" DR HEX 8MMHW-9410M SKT BIT 3/8" DR HEX 10MMTS-1340 SKT 3/8" DR INTERNAL TORX® T40 TS-1345 SKT 3/8" DR INTERNAL TORX® T45 TS-1347 SKT 3/8" DR INTERNAL TORX® T47 TS-1350 SKT 3/8" DR INTERNAL TORX® T50 TS-1355 SKT 3/8" DR INTERNAL TORX® T55 TR-3340 SKT 3/8" DR TAMPER RESISTANT TORX® INTERNAL T10TR-3345 SKT 3/8" DR TAMPER RESISTANT TORX® INTERNAL T15TR-3350 SKT 3/8" DR TAMPER RESISTANT TORX® INTERNAL T20TS-2308 SKT 3/8" DR EXTERNAL TORX® E8TS-2310 SKT 3/8" DR EXTERNAL TORX® E10TS-2312 SKT 3/8" DR EXTERNAL TORX® E12TS-2314 SKT 3/8" DR EXTERNAL TORX® E14TS-1460 SKT 1/2" DR INTERNAL TORX® T60ST-608S S/D TORX® T8 ST-610S S/D TORX® T10 ST-615S S/D TORX® T15 ST-620S S/D TORX® T20 ST-625S S/D TORX® T25 ST-627S S/D TORX® T27





TO

OL

BO

AR

DS

WRENCHES, PLIERS & SCREWDRIVERS BD-30 (Board Only)BD-30-TL (Tools Only)BD-30-A (Board & Tools)


BW-1156FP WR COMBO POLISH 12PT 1/4"BW-1159FP WR COMBO POLISH 12PT 5/16"BW-1160FP WR COMBO POLISH 12PT 3/8"BW-1161FP WR COMBO POLISH 12PT 7/16"BW-1162FP WR COMBO POLISH 12PT 1/2"BW-1163FP WR COMBO POLISH 12PT 9/16"BW-1164FP WR COMBO POLISH 12PT 5/8"BW-1165FP WR COMBO POLISH 12PT 11/16"BW-1166FP WR COMBO POLISH 12PT 3/4"BW-1167AFP WR COMBO POLISH 12PT 13/16"BW-1167FP WR COMBO POLISH 12PT 7/8"BW-1168FP WR COMBO POLISH 12PT 15/16"BW-1170FP WR COMBO POLISH 12PT 1"BW-1171FP WR COMBO POLISH 12PT 1-1/16"BW-1106MFP WR COMBO POLISH 12PT 6MMBW-1107MFP WR COMBO POLISH 12PT 7MMBW-1108MFP WR COMBO POLISH 12PT 8MMBW-1109MFP WR COMBO POLISH 12PT 9MMBW-1110MFP WR COMBO POLISH 12PT 10MMBW-1111MFP WR COMBO POLISH 12PT 11MMBW-1112MFP WR COMBO POLISH 12PT 12MMBW-1113MFP WR COMBO POLISH 12PT 13MMBW-1114MFP WR COMBO POLISH 12PT 14MMBW-1115MFP WR COMBO POLISH 12PT 15MMBW-1116MFP WR COMBO POLISH 12PT 16MMBW-1117MFP WR COMBO POLISH 12PT 17MMBW-1118MFP WR COMBO POLISH 12PT 18MMBW-1119MFP WR COMBO POLISH 12PT 19MMBW-1120MFP WR COMBO POLISH 12PT 20MMBW-1121MFP WR COMBO POLISH 12PT 21MMBW-1122MFP WR COMBO POLISH 12PT 22MMFN-1402P WR FLARE NUT 3/8" X 7/16"FN-1404P WR FLARE NUT 1/2" X 9/16"FN-1406P WR FLARE NUT 5/8" X 11/16"FN-1410P WR FLARE NUT 3/4" X 1"FN-1314MP WR FLARE NUT 13MM X 14MMAW-1006-1 WRENCH ADJUSTABLE 6"AW-1008-1 WRENCH ADJUSTABLE 8"AW-1010-1 WRENCH ADJUSTABLE 10"AW-1012-1 WRENCH ADJUSTABLE 12"ZW-1045A-A WR RATCHETING A/C 1/4" X 3/16" SQ 1/2" X 9/16" HEXST-1043S S/D 3" X 3/16" ELEC SLOTTED TIP ST-1046S S/D 6" X 3/16" ELEC SLOTTED TIP ST-1084S S/D 10" X NO. 2PT PHILLIPS® TIP ST-1081S S/D 3" X NO. 1PT PHILLIPS® TIP ST-1082S S/D 4" X NO. 2PT PHILLIPS® TIP ST-1083S S/D 6" X NO. 3PT PHILLIPS® TIP ST-1150S S/D 2" X 1/8" POCKET SLOTTED TIP ST-1008S S/D 8" X 3/8" SLOTTED TIP ST-1024S S/D 4" X 1/4" SQ SHANK SLOTTED TIP ST-1026S S/D 6" X 5/16" SQ SHANK SLOTTED TIP ST-1028S S/D 8" X 3/8" SQ SHANK SLOTTED TIP ST-1032S S/D 10" X 3/8" SQ SHANK SLOTTED TIP ST-1140S S/D 1-1/2" X NO. 2PT STUBBY PHILLIPS® TIP ST-1145S S/D 1-1/2" X 1/4" STUBBY SLOTTED TIPPT-1002-1 PLIERS HD SLIP JOINT 6" USAPT-1003-1 PLIERS SLIP JOINT COMB 8 USAPT-1050 PLIERS WIRE STRIPPER CRIMPER 8"PT-1052-1 PLIERS DIAG CUTTING 6" USAPT-1057-1 PLIERS HD DIAG CUTTING 7" USAPT-1107 PLIERS LOCKING 7" STRAIGHT JAWPT-1110 PLIERS LOCKING 10" CURVED JAWPT-1128-1 PLIERS LONGNOSE SIDECUT 6-1/2"USAPT-1149-1 PLIERS CURVED NEEDLE NOSE 6" USAPT-1250-1 PLIERS RIBLOCK 10" USAPT-1285 PLIERS INT/EXT RETAINING RING 5-3/4"PT-1286 PLIERS COMBO HD INTERNAL RETAING RING 8-1/8"ST-1184 S/D OFFSET 3/16" X 4"341/4 OFFSET SCREWDRIVER PHILLIPS® #1 & #2



W R E N C H E S , P L I E R S & S C R E W D R I V E R S ,S O C K E T S & A C C E S S O R I E S


TO

OL

BO

AR

DS



SOCKETS & ACCESSORIESBD-31 (Board Only)BD-31-TL (Tools Only)BD-31-A (Board & Tools)


GW-1605 SKT 1/4" DR 6PT 5/32" GW-1606 SKT 1/4" DR 6PT 3/16" GW-1607 SKT 1/4" DR 6PT 7/32" GW-1608 SKT 1/4" DR 6PT 1/4" GW-1609 SKT 1/4" DR 6PT 9/32" GW-1610 SKT 1/4" DR 6PT 5/16" GW-1611 SKT 1/4" DR 6PT 11/32" GW-1612 SKT 1/4" DR 6PT 3/8" GW-1614 SKT 1/4" DR 6PT 7/16" GW-1616 SKT 1/4" DR 6PT 1/2" GW-1506 SKT 1/4" DR DEEP 6PT 3/16" GW-1507 SKT 1/4" DR DEEP 6PT 7/32 GW-1508 SKT 1/4" DR DEEP 6PT 1/4"GW-1509 SKT 1/4" DR DEEP 6PT 9/32" GW-1510 SKT 1/4" DR DEEP 6PT 5/16" GW-1511 SKT 1/4" DR DEEP 6PT 11/32 GW-1512 SKT 1/4" DR DEEP 6PT 3/8" GW-1514 SKT 1/4" DR DEEP 6PT 7/16" GW-1516 SKT 1/4" DR DEEP 6PT 1/2" TS-1209 SKT 1/4" DR INTERNAL TORX® T9 TS-1210 SKT 1/4" DR INTERNAL TORX® T10 TS-1215 SKT 1/4" DR INTERNAL TORX® T15 TS-1220 SKT 1/4" DR INTERNAL TORX® T20 TS-1225 SKT 1/4" DR INTERNAL TORX® T25 TS-1227 SKT 1/4" DR INTERNAL TORX® T27 TS-1230 SKT 1/4" DR INTERNAL TORX® T30 TS-2204 SKT 1/4" DR EXTERNAL TORX® E4 TS-2205 SKT 1/4" DR EXTERNAL TORX® E5 TS-2206 SKT 1/4" DR EXTERNAL TORX® E6 TS-2207 SKT 1/4" DR EXTERNAL TORX® E7GW-9550 SPINNER HANDLE 1/4" DR 34960 ADAPTER 1/4" DR 1/4" F X 3/8" M GW-9898 EXTENSION 1/4" DR X 3" GW-9899 EXTENSION 1/4" DR X 6" GW-9945B RATCHET 1/4" DR ROUND HEAD GW-9945BR RATCHET RENEWAL KIT 1/4" DR (GW 9945B / GW 9935B) GW-9578 UNIVERSAL JOINT 1/4" DR 30010 SKT 3/8" DR 6PT 5/16" 30612 SKT 3/8" DR 6PT 3/8" 30614 SKT 3/8" DR 6PT 7/16" 30616 SKT 3/8" DR 6PT 1/2" 30618 SKT 3/8" DR 6PT 9/16" 30620 SKT 3/8" DR 6PT 5/8" 30622 SKT 3/8" DR 6PT 11/16" 30624 SKT 3/8" DR 6PT 3/4" 30626 SKT 3/8" DR 6PT 13/16" 30628 SKT 3/8" DR 6PT 7/8" HW-1510 SKT 3/8" DR DEEP 6PT 5/16" HW-1512 SKT 3/8" DR DEEP 6PT 3/8" HW-1514 SKT 3/8" DR DEEP 6PT 7/16" HW-1516 SKT 3/8" DR DEEP 6PT 1/2" HW-1518 SKT 3/8" DR DEEP 6PT 9/16" HW-1520 SKT 3/8" DR DEEP 6PT 5/8" HW-1522 SKT 3/8" DR DEEP 6PT 11/16" HW-1524 SKT 3/8" DR DEEP 6PT 3/4" HW-1526 SKT 3/8" DR DEEP 6PT 13/16" HW-1528 SKT 3/8" DR DEEP 6PT 7/8" 32007M SKT 3/8" DR 6PT 7MM 32008M SKT 3/8" DR 6PT 8MM 32009M SKT 3/8" DR 6PT 9MM 32010M SKT 3/8" DR 6PT 10MM 32011M SKT 3/8" DR 6PT 11MM 32012M SKT 3/8" DR 6PT 12MM 32013M SKT 3/8" DR 6PT 13MM 32014M SKT 3/8" DR 6PT 14MM 32015M SKT 3/8" DR 6PT 15MM 32016M SKT 3/8" DR 6PT 16MM


32017M SKT 3/8" DR 6PT 17MM 32018M SKT 3/8" DR 6PT 18MM 32019M SKT 3/8" DR 6PT 19MM HW-1510M SKT 3/8" DR DEEP 6PT 10MM HW-1511M SKT 3/8" DR DEEP 6PT 11MM HW-1512M SKT 3/8" DR DEEP 6PT 12MM HW-1513M SKT 3/8" DR DEEP 6PT 13MM HW-1514M SKT 3/8" DR DEEP 6PT 14MM HW-1515M SKT 3/8" DR DEEP 6PT 15MM HW-1517M SKT 3/8" DR DEEP 6PT 17MM HW-1518M SKT 3/8" DR DEEP 6PT 18MM HW-1519M SKT 3/8" DR DEEP 6PT 19MM 31108 SKT 3/8" 8PT 1/4" 31110 SKT 3/8" 8PT 5/16" 31112 SKT 3/8" 8PT 3/8" 31114 SKT 3/8" 8PT 7/16" 31116 SKT 3/8" 8PT 1/2" 30216 SKT 3/8" DR UNIVERSAL 6PT 1/2" 30218 SKT 3/8" DR UNIVERSAL 6PT 9/16" 30220 SKT 3/8" DR UNIVERSAL 6PT 5/8"





TO

OL

BO

AR

DS

SOCKETS & ACCESSORIES (CONTINUED)BD-31 (Board Only)BD-31-TL (Tools Only)BD-31-A (Board & Tools)


HW-1520S SKT 3/8" DR SPARK PLUG 5/8" HW-1526S SKT 3/8" DR SPARK PLUG 13/16" HW-9506 S/D BIT 3/8" DR 5/16" BLADE HW-9451 S/D BIT 3/8" DR PHILLIPS® #2 HW-9452 S/D BIT 3/8" DR PHILLIPS® #3 HW-9442 SKT BIT 3/8" DR HEX 1/8" HW-9443 SKT BIT 3/8" DR HEX 9/64" HW-9444 SKT BIT 3/8" DR HEX 5/32" HW-9449 SKT BIT 3/8" DR HEX 3/16" HW-9448 SKT BIT 3/8" DR HEX 7/32" HW-9447 SKT BIT 3/8" DR HEX 1/4" HW-9446 SKT BIT 3/8" DR HEX 5/16" HW-9445 SKT BIT 3/8" DR HEX 3/8" HW-9404M SKT BIT 3/8" DR HEX 4MM HW-9405M SKT BIT 3/8" DR HEX 5MM HW-9406M SKT BIT 3/8" DR HEX 6MM HW-9407M SKT BIT 3/8" DR HEX 7MM HW-9408M SKT BIT 3/8" DR HEX 8MM HW-9410M SKT BIT 3/8" DR HEX 10MM TS-1340 SKT 3/8" DR INTERNAL TORX® T40 TS-1345 SKT 3/8" DR INTERNAL TORX® T45 TS-1347 SKT 3/8" DR INTERNAL TORX® T47 TS-1350 SKT 3/8" DR INTERNAL TORX® T50 TS-1355 SKT 3/8" DR INTERNAL TORX® T55 TS-2308 SKT 3/8" DR EXTERNAL TORX® E8 TS-2310 SKT 3/8" DR EXTERNAL TORX® E10 TS-2312 SKT 3/8" DR EXTERNAL TORX® E12 TS-2314 SKT 3/8" DR EXTERNAL TORX® E14 TS-2316 SKT 3/8" DR EXTERNAL TORX® E1634993 UNIVERSAL JOINT 3/8" DR 34963 ADAPTER 3/8" DR 3/8" F X 1/4" M 34966 ADAPTER 3/8" DR 3/8" F X 1/2" M 34984 EXTENSION 3/8" DR X 11" 34989 EXTENSION 3/8" DR X 1-3/4" 34983 EXTENSION 3/8" DR X 19" 34988 EXTENSION 3/8" DR X 3" 34987 EXTENSION 3/8" DR X 6" 34947B RATCHET 3/8" DR BENT FLEX HANDLE 34948B RATCHET 3/8" DR ROUND HEAD MINI FLEX 34945B RATCHET 3/8" DR ROUND HEAD 34945BR RATCHET RENEWAL KIT 3/8" DR (34945B / 34948B / 34947B) 34935B RATCHET 3/8" DR ROUND HEAD FLEX 34986B FLEX HANDLE 3/8" DR X 10" 40612 SKT 1/2" DR 6PT 3/8" 40614 SKT 1/2" DR 6PT 7/16" 40616 SKT 1/2" DR 6PT 1/2" 40618 SKT 1/2" DR 6PT 9/16" 40620 SKT 1/2" DR 6PT 5/8" 40622 SKT 1/2" DR 6PT 11/16" 40624 SKT 1/2" DR 6PT 3/4" 40626 SKT 1/2" DR 6PT 13/16" 40628 SKT 1/2" DR 6PT 7/8" 40630 SKT 1/2" DR 6PT 15/16" 40632 SKT 1/2" DR 6PT 1"


40634 SKT 1/2" DR 6PT 1-1/16" 40636 SKT 1/2" DR 6PT 1-1/8" 40416 SKT 1/2" DR DEEP 6PT 1/2" 40418 SKT 1/2" DR DEEP 6PT 9/16" 40420 SKT 1/2" DR DEEP 6PT 5/8" 40422 SKT 1/2" DR DEEP 6PT 11/16" 40424 SKT 1/2" DR DEEP 6PT 3/4" 40426 SKT 1/2" DR DEEP 6PT 13/16" 40428 SKT 1/2" DR DEEP 6PT 7/8" 40430 SKT 1/2" DR DEEP 6PT 15/16" 40432 SKT 1/2" DR DEEP 6PT 1" 40434 SKT 1/2" DR DEEP 6PT 1-1/16" 40436 SKT 1/2" DR DEEP 6PT 1-1/8" 43014M SKT 1/2" DR 12PT 14MM 42015M SKT 1/2" DR 12PT 15MM 42016M SKT 1/2" DR 12PT 16MM 42017M SKT 1/2" DR 12PT 17MM 42018M SKT 1/2" DR 12PT 18MM 42019M SKT 1/2" DR 12PT 19MM 42021M SKT 1/2" DR 12PT 21MM 42022M SKT 1/2" DR 12PT 22MM 42024M SKT 1/2" DR 12PT 24MM 42030M SKT 1/2" DR 12PT 30MM 42032M SKT 1/2" DR 12PT 32MM 42036M SKT 1/2" DR 12PT 36MM 44012M SKT 1/2" DR DEEP 12PT 12MM 44013M SKT 1/2" DR DEEP 12PT 13MM 44014M SKT 1/2" DR DEEP 12PT 14MM 44015M SKT 1/2" DR DEEP 12PT 15MM 44016M SKT 1/2" DR DEEP 12PT 16MM 44017M SKT 1/2" DR DEEP 12PT 17MM 44018M SKT 1/2" DR DEEP 12PT 18MM 44019M SKT 1/2" DR DEEP 12PT 19MM 44021M SKT 1/2" DR DEEP 12PT 21MM 44022M SKT 1/2" DR DEEP 12PT 22MM 44026M SKT 1/2" DR DEEP 12PT 26MM TS-1460 SKT 1/2" DR INTERNAL TORX® T60 TS-2418 SKT 1/2" DR TORX® EXTERNAL E18 40326S SKT 1/2" DR SPARK PLUG 6PT 13/16" 40320S SKT 1/2" DR SPARK PLUG 6PT 5/8" 49978 UNIVERSAL JOINT 1/2" DR 34965 ADAPTER 1/"2 DR 1/2"F X 3/8"M 69992 ADAPTER INCREASING 1/2" DR 1/2" F X 3/4" M 49972 EXTENSION 1/2" DR 19" 49964 EXTENSION 1/2" DR 1-13/16" 49966 EXTENSION 1/2" DR 5" 49990 EXTENSION 1/2" DR 10" 49945B RATCHET 1/2" DR ROUND HEAD 49945BR RATCHET RENEWAL KIT 1/2" DR (49945B) 49988B FLEX HANDLE 1/2" DR X 17" 49946B RATCHET 1/2" DR ROUND HEAD POLISHED Q.R. 49991 ADAPTER REDUCING 3/4" F-1/2"


S O C K E T S & A C C E S S O R I E S ,T O R Q U E , & R A T C H E T I N G W R E N C H E S


TO

OL

BO

AR

DS



TORQUE WRENCHES BD-32 (Board Only)BD-32-TL (Tools Only)BD-32-A (Board & Tools)


39825-A TORQUE WRENCH 3/8" DR 20-250 FT#34870-A TORQUE WRENCH 3/8" DR 10-100 FT49859-A TORQUE WRENCH 1/2" DR 20-150 FT#49860A TORQUE WRENCH 1/2" DR 25-250 FT#34835 BEAM 3/8 DR 0-800 FT #49830 BEAM 1/2" DR 0-150 FT #

RATCHETING WRENCHES BD-34 (Board Only)BD-34-TL (Tools Only)BD-34-A (Board & Tools)


BW-1210 WR RATCHETING BOX 3/8"BW-1212 WR RATCHETING BOX 7/16"BW-1214 WR RATCHETING BOX 1/2"BW-1216 WR RATCHETING BOX 9/16"BW-1218 WR RATCHETING BOX 5/8"BW-1220 WR RATCHETING BOX 11/16"BW-1222 WR RATCHETING BOX 3/4"BW-1260 WR RATCHETING BOX 10MMBW-12605 WR RATCHETING BOX 11MMBW-1261 WR RATCHETING BOX 12MMBW-1262 WR RATCHETING BOX 13MMBW-1263 WR RATCHETING BOX 14MMBW-1264 WR RATCHETING BOX 15MMBW-1265 WR RATCHETING BOX 16MMBW-1266 WR RATCHETING BOX 17MMBW-1267 WR RATCHETING BOX 18MMBW-2210 WR RATCHETING STUBBY BOX 3/8" BW-2212 WR RATCHETING STUBBY BOX 7/16" BW-2214 WR RATCHETING STUBBY BOX 1/2" BW-2216 WR RATCHETING STUBBY BOX 9/16" BW-2218 WR RATCHETING STUBBY BOX 5/8" BW-2220 WR RATCHETING STUBBY BOX 11/16"BW-2222 WR RATCHETING STUBBY BOX 3/4" BW-2260 WR RATCHETING STUBBY BOX 10MM BW-2261 WR RATCHETING STUBBY BOX 12MM BW-2262 WR RATCHETING STUBBY BOX 13MM BW-2263 WR RATCHETING STUBBY BOX 14MM BW-2264 WR RATCHETING STUBBY BOX 15MM BW-2265 WR RATCHETING STUBBY BOX 16MM BW-2267 WR RATCHETING STUBBY BOX 18MM BW-1250 SET RATCHETING HIGH ACCESS WR 7 PC SAEBW-1251 SET RATCHETING HIGH ACCESS WR 7 PC METRIC





TO

OL

BO

AR

DS

B L A N K B O A R D

BLANK BOARDBD-17

Description

BLANK BOARD WITH 15 PEG HOOKS



HAND TOOLS.USED BY PROFESSIONALS FOR OVER 160 YEARS.

The Stanley name is synonymous with durability and dependability. Each product is developed to meet the

needs of the end user – making the job easier and faster.

Hand-Tools.qxd 6/24/05 3:09 PM Page 203


HA

ND

TO

OL

S

POWERLOCK® TAPE RULE—1" BLADEREINFORCED WITH BLADE ARMOR™ COATING• Blade Armor™ coating is a patented industrial thermoplastic coating. It’s on the first 6" for

maximum durability and 2x improved blade life. • Over 8' of standout using patented "Selective Cross Curve" technology.• 10% smaller than standard Powerlock® tapes.• Three rivet, corrosion resistant hook, moves to allow for accurate inside/outside measurements.• 1" blade, graduated in 1/16" increment.• Forward blade lock makes it easier to lock and unlock the blade.• Wearplate protects case from being cut.

Blade Length Blade Case Case Stud MarkingsItem No. Meters Feet Width Units Color Material 16" 19.2"

33-525 — 25 1" English Metallic ABS Yes Yes

POWERLOCK® TAPE RULES• 7' standout.• Mylar® polyester film coating extends blade life. • Three rivet, corrosion resistant, moves hook to allow for accurate inside/outside measurements.• Heat treated spring for longer life. • Easy reach blade remains rigid for 7'. • Top forward blade lock design. • Easy to lock and unlock blade.




33-158 5 16 3/4" English/Metric: cm Metallic ABS No No

33-016 — 16 3/4" English Yellow ABS Yes Yes

33-312 — 12 3/4" English Metallic Zinc Yes Yes


33-328 3 10 3/4" English/Metric: cm Yellow ABS No No

33-215 3.5 12 1/2" English/Metric: mm Metallic ABS No No

33-231 3 10 1/2" English/Metric: cm Metallic Zinc No No

33-218 3 — 1/2" Metric:cm Metallic Zinc No No

33-116 — 16 3/4" English Metallic ABS Yes Yes

33-272 — 12 1/2" English/Decimal Scale Yellow Zinc No No

33-512 — 12 1/2" English Yellow Zinc Yes Yes

33-212 — 12 1/2" English Metallic Zinc Yes Yes

33-202 2 6 1/2" English/Metric: cm Yellow Zinc No No

POWERLOCK® POCKET TAPE RULE—1⁄4" WIDE BLADE WITH DIAMETER SCALE• Diameter scale on back will measure up to 3' diameters. • Mylar® polyester film coating extends blade life.


33-115 3 10 1/4" English/Metric Metallic ABS No No

POWERLOCK® KEYTAPE™ RULE—1⁄4" WIDE BLADE• Durable key ring feature.


39-130 — 3 1/4" English Metallic ABS No No

First 6" are reinforced with Blade Armor™

coating.



HA

ND

TO

OL

S



M E A S U R I N G T O O L S

MAXSTEEL® TAPE RULES• 9' Standout using patented “selective cross curve” technology. (1" blades only).• Heavy and strong spring for extra long life and “smooth-as-silk” blade recoil. • Three rivet, corrosion resistant hook moves to allow for accurate inside/outside measurements

(1" blades only).• Improved blade readability with high contrast color – easy to read in all light conditions. • Top forward blade lock design makes it easier to lock and unlock the blade. • High impact, ABS case with rubber over-mold. • Mylar® polyester film coating extends blade life.


33-600 — 30 1" English Yellow ABS Yes Yes



33-695 5 16 3/4" English/Metric: cm Yellow ABS Yes Yes


33-694 — 12 5/8" English/Fractional Yellow ABS Yes Yes

33-589 3 10 5/8" English/Metric: cm Yellow ABS Yes Yes

LEVERLOCK® TAPE RULES• High visibility yellow color make it easier to find in your toolbox.• Power return tape rule with automatic bottom lock for easy operation.• Special Tru-Zero hook for use as pivot to draw circles and arcs.• Polymer coated blade and heat-treated spring for longer life.• Three rivet corrosion resistant hook.






STANLEY® TAPE RULES• 7' of standout. • Polymer coated blade for long life. • High impact, high visibility yellow ABS case.





30-496 5 16 3/4" English/Metric: cm Yellow ABS Yes No


STANLEY® POCKET TAPE RULES—1/4" & 1⁄2" WIDE BLADE• Yellow blade, graduated in 16ths of an inch for length of blade and 32nd of inch for first 12 inches.• Slim compact case.


30-061 — 10 1/4" English Black ABS No No

30-506 — 6 1/2" English Black ABS No No

30-825

Mylar® is a registered trademark of DuPont Teijin Films for its polyester film. Only DuPont Teijin Films makes Mylar® polyester film.The shape of the Powerlock® tape rule is a registered trademark of The Stanley Works or its affiliates.



HA

ND

TO

OL

S

INSTANT CHANGE™ UTILITY KNIFE• Push button, quick blade change – no tools required. • Strong and durable construction with a cast metal core and bi-material

soft panels for better grip. • Curved handle design for better comfort, control and balance.• Swing out blade storage for easy blade access. • Integrated string cutting feature. • Large hang hole. • Retractable slide. • Furnished with three 11-921 Heavy Duty utility blades.

Item No. Length

10-788 6-1/2"

QUICK CHANGE RETRACTABLE UTILITY KNIFE• Change blades quickly without a screwdriver. • Three position retractable blade slide. • Swing-out blade storage magazine. • Integrated string cutting feature. • Furnished with three 11-921 Heavy Duty utility blades.

Item No. Length

10-499 6"

CLASSIC 99® RETRACTABLE UTILITY KNIFE• Interlocking nose to hold blade.• Multi-position blade slide.• Die-cast metal handle is durable and lightweight.• Furnished with three 11-921 Heavy Duty utility blades.• Blade storage in handle.

Item No. Length

10-099 6"

RETRACTABLE UTILITY KNIVES• Patented Interlocking nose for safety. • Three position retractable blade. • Contoured handle with diagonal ribs for a positive, slip-resistant grip. • Furnished with three 11-921 Heavy Duty utility blades.

Item No. Length

10-079 5-5/8"



HA

ND

TO

OL

S



C U T T I N G T O O L S

SAFETY UTILITY KNIFE • Spring-loaded blade retracts into knife automatically when pressure on

slide button is released. • Interlocking nose secures blade safely between knife halves. • Safety-orange color for high visibility. • Furnished with one, 11-987 Round Point utility blade.

Item No. Length

10-189C 5-5/8"

CLASSIC 199® FIXED BLADE UTILITY KNIFE• Positive fixed blade retention for heavy-duty cutting. • Extra heavy duty cast metal textured handle designed for long life and

tough use. • Top and bottom overlap nose. • Accepts most Stanley® utility knife replacement blades, including the

11-931 Extra Heavy Duty blade. • Furnished with three 11-921 Heavy Duty utility blades.

Item No. Length

10-209 5-1/2"

POCKET KNIFE WITH ROTATING BLADE• Epoxy powder coated handle. • Safety blade lock. • Replaceable stainless steel blade. • Blade rotates easily into handle for safe storage.

Item No. Length

10-049 4-1/4"

METAL MITEY-KNIFE® POCKET KNIFE• Rugged metal body. • Blade storage in handle. • Retractable blade with two cutting positions. • Two, 11-031 blades and handy keychain included.

Item No. Length

10-239 3-1/2"

QUICK-POINT™ KNIVES• Retractable knife with Quick-Point™ snap-off blades. • For light duty cutting and trimming. • Blade sections snap-off providing the user with fresh, sharp cutting points. • Removable blade snapper included in cap of knife. • Supplied with one Quick-Point™ blade. • Pocket clip included on 10-150, 9 mm Quick-Point™ snap-off knife.

Item No. Description No. of Cutting Points Length

10-150 9 mm 13 5-1/8"

10-151 18 mm 18 6-1/2"



HA

ND

TO

OL

S

9 MM QUICK-POINT™ REPLACEMENT BLADES• Replacement blade with 13 cutting points.

Item No. Packed Fits Stanley Knives Thickness Length

11-300 3/Card 10-150 .017" 3-1/2"

11-300T 10 Pack Dispenser 10-150 .017" 3-1/2"

MITEY-KNIFE® BLADE• High carbon steel blade.


11-031 3/Card 10-039, 10-139, 10-239 .017" 1-1/8"

SHEEPFOOT BLADE• Sheepfoot style blade made of cutlery stainless steel. • For heavy cutting and carving.


11-040 1/Card 10-049 .040" 2-1/2"

UTILITY BLADE• Utility blade made from cutlery stainless steel. • Designed to perform most any cutting job well.


11-041 1/Card 10-049 .040" 2-1/2"

EXTRA HEAVY DUTY UTILITY BLADES• For cutting thick, dense sheet materials. • For use with fixed blade knives only.

Item No. Packed Thickness Length

11-931D 70/Dispenser .035" 2-7/16"

11-931 5/Card .035" 2-7/16"

11-931A 100/Box .035" 2-7/16"

1992® HEAVY DUTY UTILITY BLADES• For general purpose cutting. • Precision-honed edge for consistent and extended cutting life. • Fits most standard utility knives. Stanley Knives:

10-079, 10-099, 10-189C, 10-209, 10-499, 10-788


11-921 5/Card .024" 2-7/16"

11-921T 10 Pack. Dispenser .024" 2-7/16"

11-921L 50/Dispenser .024" 2-7/16"

11-921A 100/Dispenser .024" 2-7/16"

11-921B 400/Bulk .024" 2-7/16"



HA

ND

TO

OL

S



C U T T I N G T O O L S

11-301T11-301L

18 MM QUICK-POINT™ BLADE• Replacement blade with 8 cutting points. • Fits Stanley® 10-151 snap-off blade knives and most other 18 mm

snap-off blade knives.


11-301 3/Card 10-151 .020" 4-1/4"

11-301T 10 Pack Dispenser 10-151 .020" 4-1/4"

11-301L 50 Pack Dispenser 10-151 .020" 4-1/4"

ROUND POINT UTILITY BLADE• Reduces risk of accidental cuts and reduces damage to interior contents

when cutting open cartons.


11-987 5/Card .024" 1-7/8"

11-988 100/Dispenser .024" 1-7/8"

1991® REGULAR DUTY UTILITY BLADE• Regular duty utility blade for light sheet materials, paper and cardboard.


11-911 5/Card .017" 2"

11-911A 100/Dispenser .017" 2"

SINGLE EDGE RAZOR BLADE• Steel-backed high carbon steel blade fits all standard razor blade tools. • Replacement blades for Stanley® 28-100 and 28-500 scrapers.


11-515 100/Box .009" 1-1/2"

28-510 10/Dispenser .009" 1-1/2"

11-931 11-921 11-987 11-911 11-301 11-300 11-040 11-041 11-031

• • •

• • •

• • • •

• • •

• • •

• • • •

•

•

• •

•

RETRACTABLE 10-079 Interlock® Retractable Utility Regular/Heavy Duty

10-099 Classic 99® Retractable Utility Regular/Heavy Duty

10-189C Safety Knife Self-Retracting Regular/Heavy Duty

10-499 Quick-Change Retractable Utility Regular/Heavy Duty

10-788 Instant Change Retractable Utility Regular/Heavy Duty

FIXED 10-209 Classic 199® Fixed Blade Utility Regular/Heavy Duty

SNAP-OFF 10-150 Quick-Point™ 9 mm Snap-Off Light Duty

10-151 Quick-Point™ 18 mm Snap-Off Light/Regular Duty

POCKET 10-049 Pocket Knife Folding Pocket Sport, Hobby, Craft

10-239 Metal Mitey-Knife® Keychain Pocket Light Duty

KNIFE BLADESBLADE NO. DESCRIPTION THICKNESS

11-931 Extra Heavy Duty Utility Blade 0.035"

11-921 1992® Heavy Duty Utility Blade 0.024"

11-987/11-988 Round Point Utility Blade 0.024"

11-911 1991® Regular Duty Utility Blade 0.017"

11-301 18 mm Quick-Point™ Blade 0.020"

11-300 9 mm Quick-Point™ Blade 0.017"

11-040 Sheepfoot Pocket Knife Blade 0.040"

11-041 Utility Pocket Knife Blade 0.040"

11-031 Mitey-Knife® Blade 0.017"

KNIVESKNIFE NO. PRODUCT NAME KNIFE TYPE APPLICATION

UTILITY BLADES SNAP OFF POCKET KNIFE BLADES BLADES



HA

ND

TO

OL

S

JACKETED GRAPHITE HAMMER• Graphite core provides strength and durability.• The “feel” of wood but with overstrike protection.• Rim tempered chamfered edge to help prevent chipping.• High carbon, polished steel head is precision balanced.• Ribbed grip handle allows air to cool hand and channel sweat away.• Patented head-to-handle assembly and smooth handle-to-grip contour

helps prevent hang up on your tool belt.• Flared grip end helps prevent hammer from slipping off hand.

Weight Overall LengthItem No. Description Oz. Grams Inches mm

51-506 Rip Claw 16 450 13-1⁄4" 337

WOOD HANDLE NAIL HAMMER• High carbon steel head fully heat treated with polished bell face.• Hickory handle.

Weight Overall LengthItem No. Description Oz. Grams Inches mm

51-616 Curved Claw 16 450 13-1⁄4" 335

JACKETED GRAPHITE BALL PEIN HAMMERS• Heat-treated, high-carbon steel head for superior strength and durability. • Rim-tempered process around the striking face minimizes chipping

from off-center strikes. • Patented head-to-handle assembly for a permanent fit. • Molded jacket over graphite handle means maximum overstrike protection. • Cushioned grip, molded jacket is designed to absorb shock. • Ergonomically designed grip is contoured for working comfort while the

ribbed channels allows air to ventilate and cool hand, allows moisture to escape. • Flared end provides greater control and helps reduce slippage. • Exceeds ANSI safety specifications.

Weight Overall LengthItem No. Oz. Grams Inches mm

54-716 16 450 13" 345

54-724 24 680 15" 381

54-732 32 910 15" 381

COMPO-CAST® BALL PEIN HAMMERS• Dead blow steel face ball pein hammer heads are tempered alloy steel

with crowned faces for more accuracy — no bounce back.• Steel reinforced handles provide added strength and safety, resists

breaking on overstrike.• Dead blow function uses steel shot.

Weight Face Diameter Head Length Overall LengthItem No. Oz. Inches mm Inches mm Inches mm54-508 8 1" 25 3-5⁄8" 92 10-3⁄4" 27554-516 16 1-1⁄4" 32 4-1⁄8" 105 12-3⁄4" 32554-524 24 1-1⁄2" 38 4-1⁄2" 114 13-1⁄4" 33554-532 32 1-11⁄16" 43 4-3⁄4" 121 14" 355

COMPO-CAST®

HAND DRILLING/ENGINEER’S HAMMER• Dead blow steel face hammer head is tempered alloy steel with

crowned face for more accuracy — no bounce back.• Steel reinforced handle provides added strength and safety, resists

breaking on overstrike.• Dead blow function uses steel shot.

Weight Small Face Diameter Large Face Diameter Head Length Overall LengthItem No. Oz. Inches mm Inches mm Inches mm Inches mm56-532 32 1-9/32" 33 1-11⁄16" 43 4-3⁄4" 121 10-7/16" 265



HA

ND

TO

OL

S



S T R I K I N G T O O L S

COMPO-CAST®

STANDARD HEAD SOFT FACE HAMMERS• Non-sparking soft face hammers of Uni-Cast™ construction have no

exposed metal.• Soft face doesn’t mar surfaces or equipment.• Doesn’t absorb liquids.• Dead blow function uses steel shot.• Steel reinforced handles provide added strength and safety, resists

breaking on overstrike.

Weight Face Diameter Head Length Overall LengthItem No. Oz. Inches mm Inches mm Inches mm57-530 10 1.2" 30 3-1⁄8" 79 10-1/8" 25757-531 18 1.6" 40 3-3⁄4" 95 11-1/4" 28657-532 21 1.8" 45 4-1⁄16" 103 12-3⁄4" 32557-533 42 2" 53 4-5/8" 117 14" 35557-534 52 2.5" 63 5-3/8" 136 16" 405

COMPO-CAST®

SLIMLINE HEAD SOFT FACE HAMMERS • Non-sparking soft slimline hammers of Uni-Cast™ construction have no

exposed metal.• Soft face doesn’t mar surfaces.• Doesn’t absorb liquids.• Slimline models offer unique profile, ideal for assembly and repair

applications in confined areas.• Dead blow function uses steel shot.• Steel reinforced handles provide added strength and safety, resists


Weight Face Diameter Head Length Overall LengthItem No. Oz. Inches mm Inches mm Inches mm57-540 5 1" 25 3" 76 10" 25557-541 14 1-1⁄4" 32 4-1⁄4" 108 10-1⁄2" 26557-542 18 1-1⁄2" 38 4-1⁄4" 108 12" 30557-543 21 1-3⁄4" 45 5-1⁄4" 133 13" 330

COMPO-CAST®

SLEDGE HEAD SOFT FACE HAMMERS • Non-sparking soft face sledge hammers.• Flat area on heads allows upright storage.• Urethane covering helps reduce noise pollution.• Dead blow function uses steel shot.• Steel reinforced handles provide added strength and safety, resists


Weight Face Diameter Head Length Overall LengthItem No. lbs. Inches mm Inches mm Inches mm57-550 5.0 2.5" 63 7" 178 19-5/8" 49857-551 8.0 2.6" 66 7-1/8" 181 29-7/8" 75957-552 10.5 3.0" 76 8-1/4" 210 30" 76257-554 11.5 3.0" 76 8-1/8" 206 36" 914

SOFT FACE HAMMERS• Tips are made of tough plastic that won’t mar finely finished surfaces.• Handles are made of hickory and securely locked in oval eye body.• Lacquered handle.

Head Weight Handle LengthItem No. Oz. Grams Inches mm57-594 8 230 12" 30557-595 16 450 13-1⁄2" 343



HA

ND

TO

OL

S

SHOCK-RESISTANT TORPEDO LEVELS• Aluminum frame with rubber end caps for durability. • Open top read vial. • Rubber end caps for shock absorption. • Pipe groove for use on rounded surfaces.• Water resistant. Magnetic and lighted versions available. • Automatic shut off (43-512 only).

LengthItem No. Description Inches mm No. of Vials

43-510 High Impact Torpedo Level 9" 229 3

43-511 Magnetic High Impact Torpedo Level 9" 229 3

43-512 Lighted High Impact Torpedo Level 9" 229 3

STANDARD FLUTED SCREWDRIVER SETS• Versatile screwdriver set to satisfy most of your fastening needs.• Features popular sizes. • Ergonomically designed handle for comfortable grip. • Alloy steel nickel protected blades for long life. • Hardened tips for slip-resistant fit.

Item No. Contents

60-020 (2 Piece Set) 4" Standard

2 Pt. Phillips®

60-060 (6 Piece Set) 4" and 6" Standard

3" and 6" Cabinet

1 Pt. and 2 Pt. Phillips®

60-100 (10 Piece Set) 4" and 6" Standard

3" and 6" Cabinet

0 Pt., 1 Pt., 2 Pt. Phillips®

2" x 1/8" Standard

Standard Stubby

Stubby Phillips®

6 PC. PRECISION SCREWDRIVER SET• Six precision screwdrivers feature swivel-head handles. • Tough plastic shafts and soft cushion grip allow for greater comfort. • Plastic storage case to index tools.

Item No. Contents

66-052 0 Pt. and 1 Pt. Phillips®

1.4 mm Slotted

2.0 mm Slotted

2.4 mm Slotted

3.0 mm Slotted

6 PC. JEWELERS SCREWDRIVER SET• Six precision screwdrivers feature swivel-head handles. • Bright plated shafts fluted for better grip. • Hardened and tempered steel blades with blued finish to resist corrosion. • Plastic storage case to index tools.

Item No. Contents

66-039 0 pt. and 1 pt. Phillips®

1.4 mm Slotted

1.8 mm Slotted

2.3 mm Slotted

3.0 mm Slotted

60-060

60-100




HA

ND

TO

OL

S



L A Y O U T , F A S T E N I N G , S A W S & S N I P S

CUSHION GRIP MULTI-SAW• Ergonomically designed curved handle is cushioned for comfort and prolonged use.• Accepts standard reciprocating blade or hacksaw blade. • Ideal for close quarter sawing. • Large tension nut makes securing the blade quick and easy. • Sold with wood and metal blades.

Blade LengthItem No. Inches mm

20-220 6" 150

METAL MINI-HACK™ UTILITY HACKSAW• Cast aluminum handle is lightweight but built for durability.• Comfortable handle design.• Blade stays in handle to eliminate cutting hazard to hand.• Ideal for tight, hard to reach places.• Complete with a bi-metal blade.


15-809 10" 254

MINI-HACK™ UTILITY SAW• Ergonomically designed grip with thumb rest for maximum comfort.• Blade stop in handle to eliminate cutting hazard to hand.• Structural design utilizing high impact polymer coating for maximum

strength and durability.• 45%* increase in cutting depth to cut larger work.• Comes with a 10'' carbon steel blade.• For light duty use.


20-807 10" 254

*Over standard mini hacksaws

MAXSTEEL™ AVIATION SNIPS• Exceeds ANSI standards for cutting performance and durability. • Serrated cutting edges prevent slippage when cutting. • Double overwind spring for longer life. • High leverage, compound cutting design cuts up to 18-Gauge steel. • Slip-resistant bi-material palm cushion grip. • Patented hinge plate for easy product function identification. • One-handed automatic latch release with the squeeze of the handles. • Chrome plated hardware. • Ideal for cutting aluminum, vinyl siding, screening, cardboard, leather and copper.

Item No. Description Overall Length

14-563 Straight 9-21/32"

14-562 Left Curve 9-21/32"

14-564 Right Curve 9-21/32"

14-566 Long Cut Straight 11-27/64"

14-567 Offset Left Curve 9-29/64"

14-568 Offset Right Curve 9-29/64"

14-567

14-564

14-563

14-566



HA

ND

TO

OL

S

MAXSTEEL™ ALL-PURPOSE SNIPS STRAIGHT PATTERN • Exceeds ANSI standards for cutting performance and durability. • Serrated cutting edges help prevent slippage when cutting. • Slip-resistant grip.

Cutting Edge LengthItem No. Inches mm

14-569 7" 180

14-556 10" 254

14-558 12" 305

MAXGRIP™ PLIERS• Self adjusting 6" or 8" Pliers. • One hand adjustment up to 1-7/16 ". • Dual material handle for superior gripping. • Ergonomic shape for maximum comfort in most applications. • Handle hole for tethering, hanging or storage. • Meets or exceeds ANSI specifications.• Patented design.

Overall LengthItem No. Inches mm

84-881 6" 152

84-880 8" 203

MAXGRIP™ NEEDLE NOSE PLIERS• Parallel jaw movement for improved holding force. • Larger jaw capacity. • Solid steel jaws for durability and strength. • Bi-material handles ergonomically designed for comfort and ease of use. • Handle hole for tethering, hanging or storage. • Meets or exceeds ANSI specifications.• Patented design.


84-888 7" 178

84-887 9" 228

SURFORM® PLANE• Resilient enough for use on materials that would dull a traditional bench plane blade. • Manufactured with metallic gray, die-cast alloy body. • Handle made of high impact polymer. • Fitted with replaceable (10"/250 mm) blade.

Overall Length WidthItem No. Inches mm Inches mm

21-296 12-1/2" 315 1-5/8" 41

6"

8"



HA

ND

TO

OL

S



S N I P S , P L I E R S & F I N I S H I N G T O O L S

SURFORM® FLAT FILE• Superb tool for use as a rasp on wood, plastic, soft metals and many other materials. • Manufactured with a metallic grey, die-cast alloy body. • Handle made of high impact polymer. • Fitted with a replaceable (10"/250 mm) blade.


21-295 17-3/8" 400 1-5/8" 41

SURFORM® ROUND FILE• Especially useful for enlarging holes and smoothing curved surfaces. • Front grip can be removed when used in small holes. • Manufactured with high impact polymer handle and thumb support. • Fitted with a replaceable (10"/250 mm) round blade.


21-297 15-3/4" 400

SURFORM® POCKET PLANE • One handed tool. • Manufactured with a metallic gray, die-casting alloy body. • Includes thumb screw tension for quick blade replacement.• Fitted with a replaceable (5-1⁄2"/140 mm) fine cut blade.


21-399 5-1/2" 140 1-5/8" 41

SURFORM® SHAVER TOOL• Compact and effective lightweight polypropylene molded body. • Curved blade for increased stock removal. • The blade also has side cut teeth for shaving in corners. • Works on the pull stroke. • Simple, click-on blade replacement.


21-115 7-1/4" 184 1-5/8" 41



HA

ND

TO

OL

S

SURFORM® STANDARD CUT REPLACEMENT BLADE10"/250 mm. All purpose blade – use on wood, vinyl, plaster, thermalite, fiberglass and linoleum. Standard cut blade features teeth flush to the blade edge for working into edges.21-293

SURFORM® FINE CUT REPLACEMENT BLADE10"/250 mm. Designed to produce a fine finish on hard woods, end grains, and soft metals.21-393

SURFORM® FINE CUT REPLACEMENT BLADE5-1⁄2"/140 mm. Fine cut blade for finishing work, end grain, wallboards and soft met-als.21-398

SURFORM® HALF ROUND REPLACEMENT BLADEHalf round convex blade for faster stock removal and shaping curved surfaces. Idealfor work on fiberglass and removing filler (for cars and boats).21-299

SURFORM® ROUND REPLACEMENT BLADE10"/250 mm. Round blade for enlarging holes and smoothing curved surfaces.21-291

SURFORM® SHAVER REPLACEMENT BLADE2-1⁄2"/63 mm. Curved blade for fast stock removal. Works on the pull stroke.21-515

BLADES FOR SURFORM® TOOLS

Item No. Length Fits Tool(s) Shape Type of Cut Applications

21-293 10" (254 mm)) 21-295, 21-296 Flat Standard Cut Hard or soft woods,

21-398 5-1⁄2" (140 mm) 21-399 Flat Fine Cut end grain, plaster, soft

21-393 10" (254 mm) 21-295, 21-296 Flat Fine Cut metals, plastic fillers.

21-299 10" (254 mm) 21-295, 21-296 Half Round Standard Cut Hard or soft woods,

21-291 10" (254 mm) 21-297 Round Round Cut chipboard, plywood,

plaster, plastic fillers.

21-515 2-1⁄2" (64 mm) 21-115 Flat Curved Cut Hard or soft woods,

chipboard, plywood,

plaster, plastic fillers.



HA

ND

TO

OL

S



F I N I S H I N G T O O L S

RETRACTABLE RAZOR BLADE SCRAPER• Removes paint, glue, putty or adhesives from glass, tile, walls, floors or other smooth surfaces.

• Blade retracts for safe storage. Uses standard single edge razor blades. • Comes with 5 blades.


28-500 3-3/4" 95

HIGH VISIBILITY MINI-RAZOR BLADE SCRAPER• Lightweight and economical plastic razor blade scraper. • Blade reverses for safe storage. • Uses standard single edge razor blade. • Great for scraping in hard-to-reach places.


28-100 1-13/16" 46

SINGLE EDGE RAZOR BLADES• Steel backed high carbon steel blade fits all standard razor blade tools. • Replacement blades for 28-100 and 28-500 scrapers.

Item No. Packed Length Thickness

28-510 10 1-1/2" .009"

WINDOW SCRAPER• Scrapes paint from windows, mirrors, tiles and other flat surfaces.• Uses 11-921 Utility Knife Replacement Blade.


28-593 7" 178

GLASS AND TILE SCRAPER• 4" wide blade to save time on large jobs. • Used to remove paint and stickers from glass and tile. • Replaceable blade. • Rugged polypropylene construction resists most common paint thinners. • Quick release blade change.

Item No. Blade Length

28-596 4"

4" SCRAPER BLADE

Item No. Blade Length

28-597 4""



NU

ME

RIC

AL

IND

EX


ProductID No. Description Page #


10-049 Pocket Knife . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207

10-079 Retractable Utility Knife . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206

10-099 Classic 99® Retractable Utility Knife . . . . . . . . . . . . . . . . . .206

10-150 9mm Quick-Point™ Knife . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207

10-151 18mm Quick-Point™ Knife . . . . . . . . . . . . . . . . . . . . . . . . . . . .207

10-189C Self-Retracting Utility Knife . . . . . . . . . . . . . . . . . . . . . . . . . .207

10-209 Fixed Blade Classic 199® Utility Knife . . . . . . . . . . . . . . . . .207

10-239 Metal Mitey-Knife® Pocket Knife W/ Key Chain . . . . . . . .207

10-499 Quick Change Retractable Utility Knife . . . . . . . . . . . . . . . .206

10-788 Instant Change™ Retractable Knife . . . . . . . . . . . . . . . . . . .206

107-A 7 Pc 1/4" 12 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . .71

107-CNB 7 Pc 1/4" 6 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . . .71

11-031 Mitey-Knife® Blades For 10-039 / 10-139 / 10-239 (3) . . . .208

11-040 Sheepfoot Blade For 10-049 (1) . . . . . . . . . . . . . . . . . . . . . . .208

11-041 Utility Blade For 10-049 (1) . . . . . . . . . . . . . . . . . . . . . . . . . . .208

110-A 10 Pc 1/4" 12 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . .70

110-AM 10 Pc 1/4" 12 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . .71

110-CM 10 Pc 1/4" 6 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . . .71

110-CNB 10 Pc 1/4" 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . . .70

112-MNB 12 Pc 1/4" 6pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . . .69

11-300 9mm Quick-Point™ Knife Blades (3) . . . . . . . . . . . . . . . . . . .208

11-300T 9mm Quick-Point™ Knife Blades W/ Dispenser (10) . . . . .208

11-301 18 Mm Quick-Point™ Knife Blades (3) . . . . . . . . . . . . . . . . .209

11-301L 18 Mm Quick-Point™ Knife Blades W/ Dispenser (50) . . .209

11-301T 18 Mm Quick-Point™ Knife Blades W/ Dispenser (10) . . .209

11-515 Single Edge Razor Blades (100) . . . . . . . . . . . . . . . . . . . . . . .209

11-911 T 1991® Utility Blades (5) . . . . . . . . . . . . . . . . . . . . . . . . . . . .209

11-911A T 1991® Utility Blades W/ Dispenser (100) . . . . . . . . . . . . .209

11-921 T 1992® Utility Blades (5) . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

11-921A T 1992® Utility Blades W/ Dispenser (100) . . . . . . . . . . . . .208

11-921B T 1992® Utility Blades – Bulk Pack (400) . . . . . . . . . . . . . . .208

11-921L T 1992® Utility Blades W/ Dispenser (50) . . . . . . . . . . . . . .208

11-921T T 1992® Utility Blades – 10-Pack Dispenser – Carded . . .208

11-931 Extra Heavy Duty Utility Blade - 5/Card . . . . . . . . . . . . . . . .208

11-931A Extra Heavy Duty Utility Blades – Bulk Pack (100) . . . . . .208

11-931D Extra Heavy Duty Utility Blade – 70/Dispenser . . . . . . . . . .208

11-987 Round Point Utility Blades (5) . . . . . . . . . . . . . . . . . . . . . . . .209

11-988 Round Point Utility Blades W/ Dispenser (100) . . . . . . . . . .209

1215 12 Pc 1/2" Dr 12 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . .90

1217-MNB 17 Pc 1/2" Dr 12 Pt Socket Set Metric . . . . . . . . . . . . . . . . . .89

1217-S 17 Pc 1/2" Dr Sae 6 12 Pt Socket Set Sae . . . . . . . . . . . . . . .89

1218-S 17 Pc 1/2" Dr 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . .88

1226-NB 26 Pc 1/2" Dr 6 Pt Std Deep Socket Set Sae . . . . . . . . . . . . .88

1226-S 26 Pc 1/2" Dr 6 12 Pt Std Deep Socket Set Sae . . . . . . . . . . .87

1323ANB 23 Pc 1/4" & 3/8" Dr Socket Set Sae . . . . . . . . . . . . . . . . . . . .67

1412-6M 10 Pc 1/4" 12 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . .70

1412-MNB 12 Pc 1/4" Dr 6pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . .69

1412NB 12 Pc 1/4" Dr 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . .69

1421-MNB 21 Pc 1/4" Dr 6 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . .68

1421NB 21 Pc 1/4" Dr 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . .68

1427 27 Pc 1/4" Dr 6 12 Pt Socket Set Sae / Metric . . . . . . . . . . . .67

14-556 Maxsteel™ 10" Straight Pattern Snip . . . . . . . . . . . . . . . . . .214

14-558 Maxsteel™ 12" Straight Pattern Snip . . . . . . . . . . . . . . . . . .214

14-562 Aviation Snip Maxsteel™ - Left . . . . . . . . . . . . . . . . . . . . . .213

14-563 Aviation Snip Maxsteel™ - Straight . . . . . . . . . . . . . . . . . .213

14-564 Aviation Snip Maxsteel™ - Right . . . . . . . . . . . . . . . . . . . . .213

14-566 Aviation Snip Maxsteel™ - Long Cut . . . . . . . . . . . . . . . . .213

14-567 Tin Snip Maxsteel™ - Offset Left . . . . . . . . . . . . . . . . . . . . .213

14-568 Tin Snip Maxsteel™ - Offset Right . . . . . . . . . . . . . . . . . . . .213

14-569 Maxsteel™ 7" Straight Pattern Snip . . . . . . . . . . . . . . . . . . .214

15-809 Metal Mini-Hack ™ Utility Saw . . . . . . . . . . . . . . . . . . . . . . .213

20-220 Cushion Grip Multi-Use Saw . . . . . . . . . . . . . . . . . . . . . . . . .213

202-C 8 Pc 3/8" 12 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . . .83

206-CNB 8 Pc 3/8" 6 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . . . .83

207-M 7 Pc 3/8" 6 Pt Universal Socket Set Metric . . . . . . . . . . . . . .85

20-807 Mini-Hack™ Utility Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213

208-CNB 7 Pc 3/8" 6 Pt Universal Socket Set Sae . . . . . . . . . . . . . . . . .84

208-M 8 Pc 3/8" 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . . . .82

209-CNB 8 Pc 3/8" 6 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . . .83

210-B 10 Pc 1/2" 12 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . .93

21-115 Surform® shaver – 7-1/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . .215

21-291 Surform® Round Replaceable Blade . . . . . . . . . . . . . . . . . .216

21-293 Surform® Flat Replaceable Blade – Standard Cut . . . . . .216

21-295 Surform® Flat File – Regular Cut Blade . . . . . . . . . . . . . . . .215

21-296 Surform® Plane Type – Regular Cut Blade . . . . . . . . . . . . .215

21-297 Surform® Round File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215

21-299 Surform® Half Round Replaceable Blade – Regular Cut .216

21-393 Surform® Flat Replaceable Blade – Fine Cut . . . . . . . . . . .216

21-398 Surform® Pocket Replaceable Blade – Fine Cut . . . . . . . .216

21-399 Surform® Pocket Plane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215

213-BNB 13 Pc 3/8" 6 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . . .79

21-515 Surform® Shaver Replacement Blade . . . . . . . . . . . . . . . . .216

BlackH-index.qxd 6/27/05 3:41 PM Page 218


NU

ME

RIC

AL

IND

EX



N U M E R I C A L I N D E X

218-BNB 5 Pc 3/8" 8 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . . . .83

235-M 5 Pc 3/8" Hex Bit Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . .86

237-B 8 Pc 3/8" Dr Hex Bit Socket Set Metric . . . . . . . . . . . . . . . . .86

237-MB 13 Pc 3/8" Hex Bit Socket Set Sae/Metric . . . . . . . . . . . . . . .86

237-MNB 6 Pc 3/8" Hex Bit Socket Set Metric . . . . . . . . . . . . . . . . . . . .87

238-MB 8 Pc 3/8" Hex Bit Socket Set Sae/Metric . . . . . . . . . . . . . . . .86

28-100 Hi-Visibility Mini-Razor Scraper . . . . . . . . . . . . . . . . . . . . . .217

28-500 Razor Blade Scraper W/ 5 Blades . . . . . . . . . . . . . . . . . . . . .217

28-510 Single Edge Razor Blades W/ Dispenser (10) . . . . . . .209, 217

28-593 7" Window Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217

28-596 4" Glass & Tile Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217

28-597 4" Glass & Tile Blades (5) – Fits 28-596 . . . . . . . . . . . . . . . . .217

30-061 Stanley® Tape Rule 1/4" x 10' . . . . . . . . . . . . . . . . . . . . . . . .205

30-455 Stanley® Tape Rule 1" x 25' . . . . . . . . . . . . . . . . . . . . . . . . . .205

30-464 Stanley® Tape Rule 1" x 30' . . . . . . . . . . . . . . . . . . . . . . . . . .205



30-496 Stanley® Tape Rule Cm 3/4" X 16'/5m . . . . . . . . . . . . . . . . . .205

30-506 Stanley® utility tape rule - 1/2" x 6' . . . . . . . . . . . . . . . . . . .205

30-513 Leverlock® Tape Rule 3/4" X 12' . . . . . . . . . . . . . . . . . . . . . .205

30-825 Leverlock® Tape Rule 1" x 25' . . . . . . . . . . . . . . . . . . . . . . . .205

30-830 Leverlock® Tape Rule 3/4" x 16' . . . . . . . . . . . . . . . . . . . . . .205

30-986 Leverlock® Tape Rule 1" x 30’ . . . . . . . . . . . . . . . . . . . . . . . .205

30010 Skt 3/8 Dr 6 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30010A Skt 3/8 Dr 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30012 Skt 3/8 Dr 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30014 Skt 3/8 Dr 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30016 Skt 3/8 Dr 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30018 Skt 3/8 Dr 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30020 Skt 3/8 Dr 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30022 Skt 3/8 Dr 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30024 Skt 3/8 Dr 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30026 Skt 3/8 Dr 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30028 Skt 3/8 Dr 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

300301 Skt 3/8 Dr 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

300321 Skt 3/8 Dr 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30209M Skt 3/8 Dr Universal 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . .104

30210M Skt 3/8 Dr Universal 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . .104


30212 Skt 3/8 Dr Universal 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . .104



30214 Skt 3/8 Dr Universal 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . .104




30218 Skt 3/8 Dr Universal 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . .104


30222 Skt 3/8 Dr Universal 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . .104


30320S Skt 3/8 Dr Universal Spark Plug 5/8 . . . . . . . . . . . . . . . . . . . .104

30326 Skt 3/8 Dr Universal Spark Plug 13/16 . . . . . . . . . . . . . . . . . .104

30412 Skt 3/8 Dr Deep 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30414 Skt 3/8 Dr Deep 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30416 Skt 3/8 Dr Deep 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30418 Skt 3/8 Dr Deep 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30420 Skt 3/8 Dr Deep 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30422 Skt 3/8 Dr Deep 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30424 Skt 3/8 Dr Deep 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30426 Skt 3/8 Dr Deep 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30428 Skt 3/8 Dr Deep 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30430 Skt 3/8 Dr Deep 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30432 Skt 3/8 Dr Deep 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

30608 Skt 3/8 Dr 6 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30612 Skt 3/8 Dr 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30614 Skt 3/8 Dr 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30616 Skt 3/8 Dr 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30618 Skt 3/8 Dr 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30620 Skt 3/8 Dr 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30622 Skt 3/8 Dr 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30624 Skt 3/8 Dr 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30626 Skt 3/8 Dr 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30628 Skt 3/8 Dr 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30630 Skt 3/8 Dr 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

30632 Skt 3/8 Dr 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

308-M 8 Pc 1/2" 6 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . . . .94

309-BS 9 Pc 1/2" 6 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . . .94

309-M 10 Pc 1/2" 12 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . .93

310-BNB 11 Pc 1/2" 6 Pt Impact Socket Set Sae . . . . . . . . . . . . . . . . . .91

310-C 10 Pc 1/2" 6 Pt Deep Socket Set Metric . . . . . . . . . . . . . . . . .93

310-MNB 10 Pc 1/2" 12 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . .93

311-BM 11 Pc 1/2" 6 Pt Impact Socket Set Metric . . . . . . . . . . . . . . .92





NU

ME

RIC

AL

IND

EX


311-CNB 11 Pc 1/2" 6 Pt Deep Impact Socket Set Sae . . . . . . . . . . . . .92

311-DM 11 Pc 1/2" 6 Pt Deep Impact Socket Set Metric . . . . . . . . . .92

31108 Skt 3/8 8 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

31110 Skt 3/8 8 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

31112 Skt 3/8 8 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

31114 Skt 3/8 8 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

31116 Skt 3/8 8 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

3114 Open End Ignition Wr 13/64 X 15/64" . . . . . . . . . . . . . . . . . . .133

3116 Open End Ignition Wr 7/32 X 1/4" . . . . . . . . . . . . . . . . . . . . . .133




3124 Open End Ignition Wr 9/32 X 5/16" . . . . . . . . . . . . . . . . . . . . .133





314-B 11 Pc 1/2" 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . . .91

314-C 11 Pc 1/2" 12 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . .91

315-M 15 Pc 1/2" 12 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . .90

315-S 15 Pc 1/2" 12 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . . . .90

32007M Skt 3/8 Dr 6 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32008M Skt 3/8 Dr 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32009M Skt 3/8 Dr 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32010M Skt 3/8 Dr 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32011M Skt 3/8 Dr 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32012M Skt 3/8 Dr 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32013M Skt 3/8 Dr 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32014M Skt 3/8 Dr 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32015M Skt 3/8 Dr 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32016M Skt 3/8 Dr 6 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32017M Skt 3/8 Dr 6 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32018M Skt 3/8 Dr 6 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32019M Skt 3/8 Dr 6 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32020M Skt 3/8 Dr 6 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32021M Skt 3/8 Dr 6 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

32022M Skt 3/8 Dr 6 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

33-012 Powerlock® tape rule 3/4" x 12' . . . . . . . . . . . . . . . . . . . . . .204


33-115 Powerlock® tape rule 1/4" x 10' w/ dia. Scale . . . . . . . . . .204

33-116 Powerlock® tape rule yellow – 3/4" x 16' . . . . . . . . . . . . . .204

33-158 Powerlock® tape rule – 3/4" x 5m/16' . . . . . . . . . . . . . . . . .204

33-202 Powerlock® Tape Rule 1/2" X 6'/2m Zinc . . . . . . . . . . . . . .204


33-231 Powerlock® Tape Rule 1/2" X 10'/3m Zinc . . . . . . . . . . . . .204


33-328 Powerlock® tape rule metric cm 3/4" x 3m/10' . . . . . . . . .204

33-430 Powerlock® Tape Rule 1" x 30' . . . . . . . . . . . . . . . . . . . . . . .204

33-512 Powerlock® Tape Rule 1/2" X 12' Zinc . . . . . . . . . . . . . . . . .204

33-525 Powerlock® Tape Rule 1" X 25' W/ Blade Armor . . . . . . . .204

33-589 Maxsteel™ Tape Rule Metric Cm 5/8" X 10'/3m . . . . . . . . .205

33-600 Maxsteel™ Tape Rule 1" x 30' . . . . . . . . . . . . . . . . . . . . . . . .205

33-684 Maxsteel™ Tape Rule fractional 3/4" x 16' . . . . . . . . . . . . .205

33-691 Maxsteel™ Tape Rule 1/2" x 12' . . . . . . . . . . . . . . . . . . . . . . .205

33-692 Maxsteel™ Tape Rule 3/4" x 16' . . . . . . . . . . . . . . . . . . . . . . .205

33-694 Maxsteel™ Tape Rule fractional 5/8" x 12' . . . . . . . . . . . . .205

33-695 Maxsteel™ Tape Rule 3/4" X 16'/5m . . . . . . . . . . . . . . . . . . .205

34007M Skt 3/8 Dr 12 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34008M Skt 3/8 Dr 12 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34009M Skt 3/8 Dr 12 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34010M Skt 3/8 Dr 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34011M Skt 3/8 Dr 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34012M Skt 3/8 Dr 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34013M Skt 3/8 Dr 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34014M Skt 3/8 Dr 12 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34015M Skt 3/8 Dr 12 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34016M Skt 3/8 Dr 12 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34017M Skt 3/8 Dr 12 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34018M Skt 3/8 Dr 12 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34019M Skt 3/8 Dr 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34020M Skt 3/8 Dr 12 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34021M Skt 3/8 Dr 12 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34022M Skt 3/8 Dr 12 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

34835 Torque Wr 3/8 Dr 0 800 Ft# . . . . . . . . . . . . . . . . . . . . . . . . . . . .136

34870-A Torque Wr 3/8 Dr 10 100 Ft# . . . . . . . . . . . . . . . . . . . . . . . . . . .136

34935B Ratchet 3/8 Dr Round Head Flex . . . . . . . . . . . . . . . . . . . . . .102

34945B Ratchet 3/8 Dr Round Head . . . . . . . . . . . . . . . . . . . . . . . . . . .102

34945BR Ratchet Renewal Kit 3/8 Dr . . . . . . . . . . . . . . . . . . . . . . .102-103

34946B Ratchet 3/8 dr round head polished q.r. . . . . . . . . . . . . . . . .102

34946BR Ratchet Renewal Kit 3/8 Dr C95(34946b) . . . . . . . . . . . . . . . .102

34947B Ratchet 3/8 Dr Bent Flex Handle . . . . . . . . . . . . . . . . . . . . . .102

34948B Ratchet 3/8 Dr Round Head Mini Flex . . . . . . . . . . . . . . . . .103





NU

ME

RIC

AL

IND

EX




34950R Rotator® Ratchet 3/8 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

34950X Ratchet 3/8 Dr Round Head Indexible . . . . . . . . . . . . . . . . .102

34960 Adapter 1/4 Dr 1/4f X 3/8m . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

34963 Adapter 3/8 Dr 3/8f X 1/4m . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

34965 Adapter 1/2 Dr 1/2f X 3/8m . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

34966 Adapter 3/8 Dr 3/8f X 1/2m . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

34982 Speeder Handle 3/8 Dr X 16 . . . . . . . . . . . . . . . . . . . . . . . . . . .103

34983 Extension 3/8 Dr X 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

34984 Extension 3/8 Dr X 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

34986B Flex Handle 3/8 Dr X 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

34987 Extension 3/8 Dr X 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

34988 Extension 3/8 Dr X 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

34989 Extension 3/8 Dr X 1 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

34993 Universal Joint 3/8 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

3809-6 9 Pc 3/8" 6 Pt Sae Dr Socket Set . . . . . . . . . . . . . . . . . . . . . . .81

3809-B 9 Pc 3/8" 12 Pt Sae Dr Socket Set . . . . . . . . . . . . . . . . . . . . . .82

3809-D6 9 Pc 3/8" 12 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . .82

3809-DS 9 Pc 3/8" 6 Pt Deep Socket Set Sae . . . . . . . . . . . . . . . . . . . . .82

3810 10 Pc 3/8" 6 Pt Deep Impact Socket Set Metric . . . . . . . . . .81

3810-M 10 Pc 3/8" 6 Pt Impact Socket Set Metric . . . . . . . . . . . . . . . .80

3811-MNB 11 Pc 3/8" Dr 6 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . .80

3811NB 11 Pc 3/8" Dr 6 12 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . .80

3812-M 12 Pc 3/8" 12 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . . . .79

3814ANB 14 Pc 3/8" Dr 6 Pt Socket Set Sae . . . . . . . . . . . . . . . . . . . . . .79

3816-MS 16 Pc 3/8" Dr 6 Pt Metric Socket Set Sae/Metric . . . . . . . .78

3818-M 18 Pc 3/8" Dr 6 Pt Socket Set Metric . . . . . . . . . . . . . . . . . . . .78

3819-DS 19 Pc 3/8" Dr 6 Pt Std Deep Socket Set Sae . . . . . . . . . . . . . .77

3820NB 20 Pc 3/8" Dr 6 Pt Std Deep Socket Set Sae . . . . . . . . . . . . . .76

3820-S 20 Pc 3/8" Dr 12 Pt Std Deep Socket Set Sae . . . . . . . . . . . . .77

3824-MNB 24 Pc 3/8" Dr 6 Ptstd Deep Socket Set Metric . . . . . . . . . . . .75

3829-M 29 Pc 3/8" Dr 12 Pt Std Deep Socket Set Metric . . . . . . . . . .74

39-130 Powerlock® key tape 1/4" x 3' . . . . . . . . . . . . . . . . . . . . . . . .204

39825-A Torque Wrench 3/8 Dr 20 250 Ft# . . . . . . . . . . . . . . . . . . . . . .136

40112 Skt 1/2 Dr 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40114 Skt 1/2 Dr 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40116 Skt 1/2 Dr 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40118 Skt 1/2 Dr 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40120 Skt 1/2 Dr 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40122 Skt 1/2 Dr 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40124 Skt 1/2 Dr 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40126 Skt 1/2 Dr 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40128 Skt 1/2 Dr 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40130 Skt 1/2 Dr 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40132 Skt 1/2 Dr 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40134 Skt 1/2 Dr 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40136 Skt 1/2 Dr 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40138 Skt 1/2 Dr 12 Pt 1 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40140 Skt 1/2 Dr 12 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40144A Skt 1/2 Dr 12 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

4020P Open End Wr 1/4" X 5/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

40316 Skt 1/2 Dr Deep 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

40318 Skt 1/2 Dr Deep 12 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

40320 Skt 1/2 Dr Deep 12 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

40320S Skt 1/2 Dr Spark Plug 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . .113

40322 Skt 1/2 Dr Deep 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .115

40324 Skt 1/2 Dr Deep 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

40326 Skt 1/2 Dr Deep 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .115

40326S Skt 1/2 Dr Spark Plug 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . .113

40328 Skt 1/2 Dr Deep 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

40330 Skt 1/2 Dr Deep 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .115

40332 Skt 1/2 Dr Deep 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

4033P Open End Wr 15/16" X 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

40334 Skt 1/2 Dr Deep 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .115

40336 Skt 1/2 Dr Deep 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

40416 Skt 1/2 Dr Deep 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40418 Skt 1/2 Dr Deep 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40420 Skt 1/2 Dr Deep 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40422 Skt 1/2 Dr Deep 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40424 Skt 1/2 Dr Deep 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40426 Skt 1/2 Dr Deep 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40428 Skt 1/2 Dr Deep 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40430 Skt 1/2 Dr Deep 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40432 Skt 1/2 Dr Deep 6p 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40434 Skt 1/2 Dr Deep 6 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40436 Skt 1/2 Dr Deep 6 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

40612 Skt 1/2 Dr 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40614 Skt 1/2 Dr 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40616 Skt 1/2 Dr 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40618 Skt 1/2 Dr 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40620 Skt 1/2 Dr 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40622 Skt 1/2 Dr 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40624 Skt 1/2 Dr 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113





NU

ME

RIC

AL

IND

EX


40626 Skt 1/2 Dr 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40628 Skt 1/2 Dr 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40630 Skt 1/2 Dr 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40632 Skt 1/2 Dr 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40634 Skt 1/2 Dr 6 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40636 Skt 1/2 Dr 6 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40640 Skt 1/2 Dr 6 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

40642A Skt 1/2 Dr 6 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

411-BNB 11 Pc 3/4" Dr 12 Pt Socket Set Sae W/Metal Case . . . . . . . .95

415-B 15 Pc 3/4" Dr 12 Pt Socket Set Sae W/Metal Case . . . . . . . .95

42010M Skt 1/2 Dr 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42011M Skt 1/2 Dr 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42012M Skt 1/2 Dr 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42013M Skt 1/2 Dr 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42014M Skt 1/2 Dr 12 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42015M Skt 1/2 Dr 12 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42016M Skt 1/2 Dr 12 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42017M Skt 1/2 Dr 12 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42018M Skt 1/2 Dr 12 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42019M Skt 1/2 Dr 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42020M Skt 1/2 Dr 12 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42021M Skt 1/2 Dr 12 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42022M Skt 1/2 Dr 12 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42023M Skt 1/2 Dr 12 Pt 23mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42024M Skt 1/2 Dr 12 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42025M Skt 1/2 Dr 12 Pt 25mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42026M Skt 1/2 Dr 12 Pt 26mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42027M Skt 1/2 Dr 12 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42028M Skt 1/2 Dr 12 Pt 28mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42030M Skt 1/2 Dr 12 Pt 30mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42032M Skt 1/2 Dr 12 Pt 32mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

42036M Skt 1/2 Dr 12 Pt 36mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

428-BS 28 Pc 3/4" Dr 12 Pt Socket Set Sae W/Metal Case . . . . . . . .94

43-510 High Impact Torpedo Level . . . . . . . . . . . . . . . . . . . . . . . . . . .212

43-511 Magnetic High Impact Torpedo Level . . . . . . . . . . . . . . . . . .212

43-512 Lighted High Impact Torpedo Level . . . . . . . . . . . . . . . . . . . .212

43010M Skt 1/2 Dr 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43011M Skt 1/2 Dr 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43012M Skt 1/2 Dr 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43013M Skt 1/2 Dr 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43014M Skt 1/2 Dr 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43015M Skt 1/2 Dr 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43017M Skt 1/2 Dr 6 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43019M Skt 1/2 Dr 6 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43021M Skt 1/2 Dr 6 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43022M Skt 1/2 Dr 6 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43023M Skt 1/2 Dr 6 Pt 23mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43024M Skt 1/2 Dr 6 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

43027M Skt 1/2 Dr 6 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

44010M Skt 1/2 Dr Deep 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44011M Skt 1/2 Dr Deep 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44012M Skt 1/2 Dr Deep 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44013M Skt 1/2 Dr Deep 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44014M Skt 1/2 Dr Deep 12 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44015M Skt 1/2 Dr Deep 12 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44016M Skt 1/2 Dr Deep 12 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44017M Skt 1/2 Dr Deep 12 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44018M Skt 1/2 Dr Deep 12 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44019M Skt 1/2 Dr Deep 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44020M Skt 1/2 Dr Deep 12 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44021M Skt 1/2 Dr Deep 12 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44022M Skt 1/2 Dr Deep 12 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44023M Skt 1/2 Dr Deep 12 Pt 23mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44024M Skt 1/2 Dr Deep 12 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44025M Skt 1/2 Dr Deep 12 Pt 25mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44026M Skt 1/2 Dr Deep 12 Pt 26mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

44027M Skt 1/2 Dr Deep 12 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . . . .115

45010M Skt 1/2 Dr Deep 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45011M Skt 1/2 Dr Deep 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45012M Skt 1/2 Dr Deep 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45013M Skt 1/2 Dr Deep 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45014M Skt 1/2 Dr Deep 6 Pt 14mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45015M Skt 1/2 Dr Deep 6 Pt 15mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45016M Skt 1/2 Dr Deep 6 Pt 16mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45017M Skt 1/2 Dr Deep 6 Pt 17mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45018M Skt 1/2 Dr Deep 6 Pt 18mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45019M Skt 1/2 Dr Deep 6 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45020M Skt 1/2 Dr Deep 6 Pt 20mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45021M Skt 1/2 Dr Deep 6 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45022M Skt 1/2 Dr Deep 6 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45023M Skt 1/2 Dr Deep 6 Pt 23mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45024M Skt 1/2 Dr Deep 6 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . .115





NU

ME

RIC

AL

IND

EX




45025M Skt 1/2 Dr Deep 6 Pt 25mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45026M Skt 1/2 Dr Deep 6 Pt 26mm . . . . . . . . . . . . . . . . . . . . . . . . .115

45027M Skt 1/2 Dr Deep 6 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . .115

4723P Open End Wr 3/8" X 7/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

4724P Open End Wr 7/16" X 1/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

4725P Open End Wr 1/2" X 9/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

4727P Open End Wr 5/8" X 11/16" . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

4728P Open End Wr 11/16" X 3/4" . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

4732P Open End Wr13/16" X 7/8" . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

49830 Torque Wr Beam 1/2 Dr 0 150 Ft# . . . . . . . . . . . . . . . . . . . . . .136

49859-A Torque Wrench 1/2 Dr 20 150 Ft# . . . . . . . . . . . . . . . . . . . . . .136

49860A Torque Wrench 1/2 Dr 25 250 Ft# . . . . . . . . . . . . . . . . . . . . . .136

49860ARK Repair Kit for 49860A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136


49945BR Ratchet Renewal Kit 1/2 Dr (49945b) . . . . . . . . . . . . . . . . . . .112

49946B Ratchet 1/2 dr round head polished q.r. . . . . . . . . . . . . . . . .112

49946BR Ratchet Renewal Kit 1/2 Dr (49946b) . . . . . . . . . . . . . . . . . . .112

49964 Extension 1/2 Dr X 1 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

49966 Extension 1/2 Dr X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

49972 Extension 1/2 Dr X 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

49976 Universal Joint Impact 1/2 Dr . . . . . . . . . . . . . . . . . . . . . . . . .118

49978 Universal Joint 1/2 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

49979 Socket Draglink 1/2 Dr X 15/16 . . . . . . . . . . . . . . . . . . . . . . . .113

49980 Stud Extractor 1/2 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

49988B Flex Handle 1/2 Dr X 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

49990 Extension 1/2 Dr X 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

49991 Adapter 3/4 Dr 3/4f X 1/2m . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

49992 Speeder Handle 1/2 Dr X 18 . . . . . . . . . . . . . . . . . . . . . . . . . . .112

51-506 Rip Jacketed Graphite-Nailer – 16 oz. . . . . . . . . . . . . . . . . .210

51-616 Wood Curved Claw Hammer – 16 oz. . . . . . . . . . . . . . . . . . . .210

54-508 Compo-Cast® Ball Pein Hammer 8 oz., 10-3/4" . . . . . . . . . .210

54-516 Compo-cast® Ball Pein Hammer 16 oz., 12-3/4" . . . . . . . . .210

54-524 Compo-Cast® Ball Pein Hammer 24 oz., 13-1/4" . . . . . . . . .210

54-532 Compo-Cast® Ball Pein Hammer 32 oz., 14" . . . . . . . . . . . .210

54-716 Jacketed Ball Pein Hammer 16 oz. . . . . . . . . . . . . . . . . . . . .210



56-532 Compo Cast® Drill Hammers – 32 oz 10-1/2" . . . . . . . . . . .210

57-530 Compo-Cast® Mallet – 10 oz., 10" . . . . . . . . . . . . . . . . . . . . .211


57-532 Compo-Cast® Mallet – 21 oz., 12-3/4" . . . . . . . . . . . . . . . . . .211



57-540 Compo-Cast® Slimline Head Soft Face Hammer . . . . . . . .211

57-541 Compo-Cast® Mallet – 14 oz., 10-1/2" . . . . . . . . . . . . . . . . . .211



57-550 Compo-Cast® Mallet – 5 lbs., 20" . . . . . . . . . . . . . . . . . . . . .211

57-551 Compo-Cast® Mallet – 8 lbs., 30" . . . . . . . . . . . . . . . . . . . . .211

57-552 Compo-Cast® Mallet – 10.5 lbs., 30" . . . . . . . . . . . . . . . . . . .211

57-554 Compo-Cast® Mallet – 11.5 lbs., 36" . . . . . . . . . . . . . . . . . . .211

57-594 Soft Face Hammer – 8 oz., 12" hndl . . . . . . . . . . . . . . . . . . . .211

57-595 Soft Face Hammer – 16 oz., 13-1/4" hndl . . . . . . . . . . . . . . . .211

60-020 Stanley® 2 pc. Screwdriver set . . . . . . . . . . . . . . . . . . . . . . .212

60-060 Stanley® 6 pc. Screwdriver set . . . . . . . . . . . . . . . . . . . . . . .212

60-100 Stanley® 10 pc. Screwdriver set . . . . . . . . . . . . . . . . . . . . . .212

60026A Skt 3/4 Dr 12 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60027A Skt 3/4 Dr 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60028 Skt 3/4 Dr 12 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60030 Skt 3/8 Dr 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60032 Skt 3/4 Dr 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60034 Skt 3/4 Dr 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60036 Skt 3/4 Dr 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60038 Skt 3/4 Dr 12 Pt 1 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60040 Skt 3/4 Dr 12 Pt 1 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60042 Skt 3/4 Dr 12 Pt 1 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60044 Skt 3/4 Dr 12 Pt 1 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60046 Skt 3/4 Dr 12 Pt 1 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60048 Skt 3/4 Dr 12 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60050 Skt 3/4 Dr 12 Pt 1 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60052 Skt 3/4 Dr 12 Pt 1 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60054 Skt 3/4 Dr 12 Pt 1 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60056 Skt 3/4 Dr 12 Pt 1 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60058 Skt 3/4 Dr 12 Pt 1 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60060 Skt 3/4 Dr 12 Pt 1 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60064 Skt 3/4 Dr 12 Pt 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60068 Skt 3/4 Dr 12 Pt 2 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60070 Skt 3/4 Dr 12 Pt 2 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60072 Skt 3/4 Dr 12 Pt 2 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

60076 Skt 3/4 Dr 12 Pt 2 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61019M Skt 3/4 Dr 12 Pt 19mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61021M Skt 3/4 Dr 12 Pt 21mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119





NU

ME

RIC

AL

IND

EX


61022M Skt 3/4 Dr 12 Pt 22mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61023M Skt 3/4 Dr 12 Pt 23mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61024M Skt 3/4 Dr 12 Pt 24mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61025M Skt 3/4 Dr 12 Pt 25mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61026M Skt 3/4 Dr 12 Pt 26mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61027M Skt 3/4 Dr 12 Pt 27mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61028M Skt 3/4 Dr 12 Pt 28mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61029M Skt 3/4 Dr 12 Pt 29mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61030M Skt 3/4 Dr 12 Pt 30mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61031M Skt 3/4 Dr 12 Pt 31mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61032M Skt 3/4 Dr 12 Pt 32mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61035M Skt 3/4 Dr 12 Pt 35mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61036M Skt 3/4 Dr 12 Pt 36mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61038M Skt 3/4 Dr 12 Pt 38mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61041M Skt 3/4 Dr 12 Pt 41mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61042M Skt 3/4 Dr 12 Pt 42mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61046M Skt 3/4 Dr 12 Pt 46mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61050M Skt 3/4 Dr 12 Pt 50mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61054M Skt 3/4 Dr 12 Pt 54mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

61055M Skt 3/4 Dr 12 Pt 55mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

66-039 Jewelers 6 pc. Precision screwdriver set . . . . . . . . . . . . . .212

66-052 6 Pc. Precision Screwdriver Set . . . . . . . . . . . . . . . . . . . . . .212


69945BR Ratchet Renewal Kit 3/4 Dr (69945B) . . . . . . . . . . . . . . . . . . .118

69990 Adapter 1 Dr 1f X 3/4m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

69992 Adapter 1/2 Dr 1/2f X 3/4m . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

69993 Extension 3/4 Dr X 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

69994 Extension 3/4 Dr X 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

69995 Extension 3/4 Dr X 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

69997 Sliding Tee Handle 3/4 Dr X 18 . . . . . . . . . . . . . . . . . . . . . . . .118

69998 Flex Handle 3/4 Dr X 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

84-880 Maxgrip™ 8" Self-Adjusting Pliers . . . . . . . . . . . . . . . . . . . .214

84-881 Maxgrip™ 6" Self-Adjusting Pliers . . . . . . . . . . . . . . . . . . . .214

84-887 Maxgrip™ 9" Needle Nose Pliers . . . . . . . . . . . . . . . . . . . . .214

84-888 Maxgrip™ 7" Needle Nose Pliers . . . . . . . . . . . . . . . . . . . . .214

8921NB 21 Pc 3/8" 6 Pt Std Deep Socket Set Sae . . . . . . . . . . . . . . . .76

8924MNB 24 Pc 3/8" 6 Pt Std Deep Socket Set Metric . . . . . . . . . . . . . .75

900-0 Insert Bit Hex Slotted 7/64 . . . . . . . . . . . . . . . . . . . . . . . . . . .150

900-1 Insert Bit Hex Slotted 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . .150


900-20 Insert Bit Hex 0 Pt Phillips . . . . . . . . . . . . . . . . . . . . . . . . . .150

900-21 Insert Bit Hex 1 Phillips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150




900-30 Insert Bit Hex Sq Head #0 . . . . . . . . . . . . . . . . . . . . . . . . . . . .150





900-40 Insert Bit Hex Reed Prince #0 (Pozi) . . . . . . . . . . . . . . . . . .150





900-51 Insert Bit Hex Phillips Arc #1 . . . . . . . . . . . . . . . . . . . . . . . .150



900-6 Insert Bit Hex Slotted 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

900-60 Insert Bit Hex Hex 5/64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

900-61 Insert Bit Hex 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

900-62 Insert Bit Hex 5/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

900-63 Insert Bit Hex 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

900-64 Insert Bit Hex 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150


900-70 Insert Bit Hex Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148


9000-A Socket Adapter M X M 1/4" Hex X 1/4" Socket . . . . . . . . . .150

9000-T10 Insert Bit Hex Torx T10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150










9000-TP10 Insert Bit Hex Tamper Proof Torx T10 . . . . . . . . . . . . . . . . . .150








NU

ME

RIC

AL

IND

EX





90007S Side Cabinet, 7 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

9000H Hex Bit Holder 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

9023 9 Pc Ratcheting Screwdriver Set . . . . . . . . . . . . . . . . . . . . . .151

9026NB 26 Pc 1/4" Drive Standard/Metric Ratcheting Set . . . . . . . .151

9251NB 50 Pc 1/4" & 3/8" Dr 6 8 Pt Socket Set Sae/Metric . . . . . . . .65

92703I Intermediate Cabinet, 3 Drawers . . . . . . . . . . . . . . . . . . . . . . . .6

92705C Top Chest, 5 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

92705R Roller Cabinet, 5 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3



9299NB 104 Pc 1/4" & 3/8" Dr 6 12 Pt Socket Set Sae/Metric . . . . . .58

940-JS 40 Pc Insert Bit Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149




94113R Roller Cabinet, 13 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2


95410C Top Chest, 10 Drawers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4


9609MNB 9 Pc Polish Comb Wr Set Metric . . . . . . . . . . . . . . . . . . . . . .123

9609PNB 9 Pc Polish Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . .123

94100 Tool Box with Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

97050 1050 Pc Master Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-15

97065 64 Pc 1/4" & 3/8" Dr 6 12 Socket Set Sae/Metric . . . . . . . . . .62

97110 130 Pc 1/4", 3/8", & 1/2" Dr Mech Tool Set . . . . . . . . . . . .52-53

97118 118 Pc 1/4", 3/8", & 1/2" Dr Mech Tool Set . . . . . . . . . . . .54-55

97147 192 Pc Master Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .44-45

97148 172 Pc Master Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-47





9730-B 30 Pc General Purpose Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

9731-B 31 Pc 1/4 & 3/8" Dr 12 Pt Socket Set Sae/Metric . . . . . . . . .66

9750 50 Pc 1/4" & 3/8" Dr 6 8 12 Pt Socket Set Sae/Metric . . . . . .64

9753 53 Pc 1/4" & 3/8" Dr 6 12 Pt Socket Set Sae/Metric . . . . . . .63

9753-B 65 Pc 1/4" & 3/8" Dr 6 12 Pt Socket Set Sae/Metric . . . . . . .60





9782 82 Pc Master Tool Set W/ Metal Hip Roof Box . . . . . . . . . .48

9782-B 82 Pc 1/4", 3/8" & 1/2" Dr 6 12 Pt Socket Set Sae/Metric . . .57

97835 835 Pc Master Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-21

9796 99 Pc 1/4", 3/8", & 1/2" Dr 6 12 Socket Set Sae/Metric . . . . .56

9913X 13 Pc 6 Pt 3/8" Dr Index Set Sae . . . . . . . . . . . . . . . . . . . . . . . .85

9913XM 13 Pc 6 Pt 3/8" Dr Index Set Metric . . . . . . . . . . . . . . . . . . . . .85

9930X 30 Pc 6 Pt 3/8" Dr 6pt Index Set Sae/Metric . . . . . . . . . . . . . .73

9934 34 Pc 3/8" Dr 12 Pt Std Deep Socket Set Sae/Metric . . . . . .72

AS3 3 Piece Drive Adapter Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

AW-1004-1 Wrench Adjustable 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135



AW-1010-1 Wrench Adjustable 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135



AW-1351 Wrench Universal Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

BCF-10M Wr Crowfoot 3/8 Dr 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

BCF-12 Wr Crowfoot 3/8 Dr 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107



BCF-14 Wr Crowfoot 3/8 Dr 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107





BCF-18 Wr Crowfoot 3/8 Dr 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107




BCF-22 Wr Crowfoot 3/8 Dr 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107



BCF-26 Wr Crowfoot 3/8 Dr 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107


BCF-32 Wr Crowfoot 3/8 Dr 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

BCF-50MNB 10 Pc Crowfoot Wr Sae . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

BCF-50NB 10 Pc Crowfoot Wr Metric . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

BD-1 1/2" & 3/8" Dr Tools (Board Only) . . . . . . . . . . . . . . . . . . . . . .182

BD-1- A 1/2" & 3/8" Dr Tools (Board & Tools) . . . . . . . . . . . . . . . . . . .182

BD-10 3/4" Dr Tools (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .188





NU

ME

RIC

AL

IND

EX


BD-10-A 3/4" Dr Tools (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . .188

BD-10-TL 3/4" Dr Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188

BD-12 3/8" Dr Impact Tools (Board Only) . . . . . . . . . . . . . . . . . . . . .189

BD-12-A 3/8" Dr Impact Tools (Board & Tools) . . . . . . . . . . . . . . . . .189

BD-12-TL 3/8" Dr Impact Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . .189




BD-15 Pullers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191

BD-15-A Pullers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191

BD-15-TL Pullers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191




BD-17 Blank Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202

BD-18 Nut Drivers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

BD-18-A Nut Drivers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . .192

BD-18-TL Nut Drivers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

BD-1-TL 1/2" & 3/8" Dr Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . . .182

BD-2 1/2" Drive Tools (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . .183

BD-21 1/4", 3/8", 1/2" Dr Tools (Board Only) . . . . . . . . . . . . . . . . . .193

BD-21-A 1/4", 3/8", 1/2" Dr Tools (Board & Tools) . . . . . . . . . . . . . .193

BD-21-TL 1/4", 3/8", 1/2" Dr Tools (Tools Only) . . . . . . . . . . . . . . . . . . .193

BD-23 Screwdrivers & Pliers (Board Only) . . . . . . . . . . . . . . . . . . .194

BD-23-A Screwdrivers & Pliers (Board & Tools) . . . . . . . . . . . . . . . .194

BD-23-TL Screwdrivers & Pliers (Tools Only) . . . . . . . . . . . . . . . . . . . .194

BD-24 Comb Full Polish Wr (Board Only) . . . . . . . . . . . . . . . . . . . . .194

BD-24-A Comb Full Polish Wr (Board & Tools) . . . . . . . . . . . . . . . . . .194

BD-24-TL Comb Full Polish Wr (Tools Only) . . . . . . . . . . . . . . . . . . . . . .194

BD-25 Specialty Wr (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .195

BD-25-A Specialty Wr (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . .195

BD-25-TL Specialty Wr (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .195

BD-26 Adj Wr & Pliers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . .195

BD-26-A Adj Wr & Pliers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . .195

BD-26-TL Adj Wr & Pliers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . .195

BD-27 Adj Wr (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196

BD-27-A Adj Wr (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196

BD-27-TL Adj Wr (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196

BD-28 Punches & Chisels (Board Only) . . . . . . . . . . . . . . . . . . . . . .196

BD-28-A Punches & Chisels (Board & Tools) . . . . . . . . . . . . . . . . . . .196

BD-28-TL Punches & Chisels (Tools Only) . . . . . . . . . . . . . . . . . . . . . .196

BD-29 1/4" & 3/8" Dr Bits & Torx Dr (Board Only) . . . . . . . . . . . . . .197

BD-29-A 1/4" & 3/8" Dr Bits & Torx Dr (Board & Tools) . . . . . . . . . . .197

BD-29-TL 1/4" & 3/8" Dr Bits & Torx Dr (Tools Only) . . . . . . . . . . . . . . .197

BD-2-A 1/2" Drive Tools (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . .183

BD-2-TL 1/2" Drive Tools (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . .183

BD-3 Comb & Flare Nut Wr (Board Only) . . . . . . . . . . . . . . . . . . . .184

BD-30 Wr, Pliers & SD (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . .198

BD-30-A Wr, Pliers & SD (Board & Tools) . . . . . . . . . . . . . . . . . . . . . .198

BD-30-TL Wr, Pliers & SD (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . .198

BD-31 Sockets & Accessories (Board Only) . . . . . . . . . . . . . .199-200

BD-31-A Sockets & Accessories (Board & Tools) . . . . . . . . . . .199-200

BD-31-TL Sockets & Accessories (Tools Only) . . . . . . . . . . . . . . .199-200

BD-32 Torque Wr (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

BD-32-A Torque Wr (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . .201

BD-32-TL Torque Wr (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

BD-34 Ratcheting Wr (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . .201

BD-34-A Ratcheting Wr (Board & Tools) . . . . . . . . . . . . . . . . . . . . . .201

BD-34-TL Ratcheting Wr (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . .201

BD-3-A Comb & Flare Nut Wr (Board & Tools) . . . . . . . . . . . . . . . . .184

BD-3-TL Comb & Flare Nut Wr (Tools Only) . . . . . . . . . . . . . . . . . . . .184

BD-4 Open End & Box End Wr (Board Only) . . . . . . . . . . . . . . . . .184

BD-4-A Open End & Box End Wr (Board & Tools) . . . . . . . . . . . . . .184

BD-4-TL Open End & Box End Wr (Tools Only) . . . . . . . . . . . . . . . . . .184

BD-5 Screwdrivers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . .185

BD-5-A Screwdrivers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . .185

BD-5-TL Screwdrivers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . .185

BD-6 Pliers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185

BD-6-A Pliers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185

BD-6-TL Pliers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185







BD-9 Hammers (Board Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188

BD-9-A Hammers (Board & Tools) . . . . . . . . . . . . . . . . . . . . . . . . . . . .188

BD-9-TL Hammers (Tools Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188

BL-006 6 Pc Black Finish Wr Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130

BL-006M 6 Pc Black Finish Wr Set Metric . . . . . . . . . . . . . . . . . . . . . .130

BL-009 9 Pc Black Finish Wr Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129





NU

ME

RIC

AL

IND

EX




BL-009M 9 Pc Black Finish Wr Set Metric . . . . . . . . . . . . . . . . . . . . . .130

BL-014 14 Pc Black Finish Wr Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

BL-014M 14 Pc Black Finish Wr Set Metric . . . . . . . . . . . . . . . . . . . . .129

BW-0308RBS 8 Pc Wr Ratchet and Socket Set . . . . . . . . . . . . . . . . . . . . .144

BW-0516R Wr Rev Ratcheting Dbl Box 5/16" X 3/8" . . . . . . . . . . . . . . . .143

BW-0608T Wr Standard Ratcheting Dbl Box E-Torx® E6 X E8 . . . . . .144


BW-0809R Wr Rev Ratcheting Dbl Box 8 X 9mm . . . . . . . . . . . . . . . . . .143


BW-1011R Wr Rev Ratcheting Dbl Box 10 X 11mm . . . . . . . . . . . . . . . .143

BW-1012T Wr Standard Ratchet Dbl Box E-Torx® E10 X E12 . . . . . . .144

BW-108MNB 8 Pc Open End Wr Set Metric . . . . . . . . . . . . . . . . . . . . . . . . .132

BW-108PNB 8 Pc Open End Wr Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

BW-1106M Wr Combo Satin 6 Pt 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

BW-1106MB Wr Combo Black Finish 6 Pt 6mm . . . . . . . . . . . . . . . . . . . . .131

BW-1106MFP Wr Combo Satin 6 Pt 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . .125










BW-1110M Wr Combo Satin 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . .128

BW-1110MB Wr Combo Black Finish 12 Pt 10mm . . . . . . . . . . . . . . . . . . .131

BW-1110MFP Wr Combo Satin 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . .125



















BW-1116R Wr Rev Ratcheting Dbl Box 11/16" X 3/4" . . . . . . . . . . . . . . .143








































NU

ME

RIC

AL

IND

EX


BW-1130MFP Wr Combo Satin 12 Pt 30mm . . . . . . . . . . . . . . . . . . . . . . . .125



BW-1132MFP Wr Combo Satin 12 Pt 32mm . . . . . . . . . . . . . . . . . . . . . . . .125

BW-1156 Wr Combo Satin 12 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

BW-1156B Wr Combo Black Finish 12 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . .131

BW-1156FP Wr Combo Polish 12 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

BW-1159 Wr Combo Satin 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

BW-1159B Wr Combo Black Finish 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . .131

BW-1159FP Wr Combo Polish 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .124
















BW-1165 Wr Combo Satin 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .128

BW-1165B Wr Combo Black Finish 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . .131

BW-1165FP Wr Combo Polish 12 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . .124





BW-1167A Wr Combo Satin 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .128

BW-1167AB Wr Combo Black Finish 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . .131

BW-1167AFP Wr Combo Polish 12 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . .124



BW-1168 Wr Combo Satin 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .128

BW-1168B Wr Combo Black Finish 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . .131

BW-1168FP Wr Combo Polish 12 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . .124

BW-1170 Wr Combo Satin 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

BW-1170B Wr Combo Black Finish 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . .131

BW-1170FP Wr Combo Polish 12 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

BW-1171 Wr Combo Satin 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . .128

BW-1171B Wr Combo Black Finish 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . .131

BW-1171FP Wr Combo Polish 12 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . .124

BW-1172 Wr Combo Satin 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . .128

BW-1172B Wr Combo Black Finish 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . .131

BW-1172FP Wr Combo Polish 12 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . .124










BW-1176B Wr Combo Black Finish 12 Pt 1 7/16 . . . . . . . . . . . . . . . . . . .131





BW-11P 11 Pc Polish Comb Wr Set Sae / Metric . . . . . . . . . . . . . . .123

BW-11PT 11 Pc Polish Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . .123

BW-1210 Wr Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138








BW-1250 7 Pc Wr Ratcheting Box Set . . . . . . . . . . . . . . . . . . . . . . . . . .138

BW-1251 7 Pc Wr Ratcheting Box Set-Metric . . . . . . . . . . . . . . . . . . .138

BW-1258 Wr Ratcheting Box 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138

BW-1259 Wr Ratcheting Box 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138

BW-1260 Wr Ratcheting Box 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .138









NU

ME

RIC

AL

IND

EX









BW-1300T 4 Pc Wr Standard Ratchet Dbl Box E-Torx® Set . . . . . . . .144

BW-1400 8 Pc Reverse Gear Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . .139

BW-1401 7 Pc Wr Jumbo Rev Ratcheting Box Set . . . . . . . . . . . . . . . .140

BW-1403 Wr Rev Ratcheting Box 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . .139

BW-1405 Wr Rev Ratcheting Box 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . .139

BW-1408 8 Pc Reverse Gear Wr Set Metric . . . . . . . . . . . . . . . . . . . . .139









BW-1422 Wr Rev Ratcheting Box 11/16 . . . . . . . . . . . . . . . . . . . . . . . . .139


BW-1426 Wr Jumbo Rev Ratcheting Box . . . . . . . . . . . . . . . . . . . . . . . .140







BW-1450 Set Reverse Gear Wr 12pc Metric . . . . . . . . . . . . . . . . . . . . .139

BW-1451 7 Pc Wr Jumbo Rev Ratcheting Box Set-Metric . . . . . . . . .140

BW-1458 Wr Rev Ratcheting Box 8mm . . . . . . . . . . . . . . . . . . . . . . . . .140

BW-1459 Wr Rev Ratcheting Box 9mm . . . . . . . . . . . . . . . . . . . . . . . . .140

BW-1460 Wr Rev Ratcheting Box 10mm . . . . . . . . . . . . . . . . . . . . . . . .140










BW-1471 Wr Jumbo Rev Ratcheting Box 21mm . . . . . . . . . . . . . . . . . .140







BW-14MPT 14 Pc Polish Comb Wr Set Sae / Metric . . . . . . . . . . . . . . .123

BW-14PT 14 Pc Polish Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . .122




BW-2206R Wr Ratcheting Stubby Box 1/4 . . . . . . . . . . . . . . . . . . . . . . . .141

BW-2208R Wr Ratcheting Stubby Box 5/16 . . . . . . . . . . . . . . . . . . . . . . .141






BW-2220R Wr Ratcheting Stubby Box 11/16 . . . . . . . . . . . . . . . . . . . . . .141


BW-2250R 9 Pc Ratcheting Stubby Wr Set Sae . . . . . . . . . . . . . . . . . . .141

BW-2251R 13 Pc Ratcheting Stubby Wr Set Metric . . . . . . . . . . . . . . .141

BW-2260R Wr Ratcheting Stubby Box 10mm . . . . . . . . . . . . . . . . . . . . .141










BW-2276R Wr Ratcheting Stubby Box 6mm . . . . . . . . . . . . . . . . . . . . . .141



BW-3209L Wr Flex Ratcheting Box 5/16" . . . . . . . . . . . . . . . . . . . . . . . . .142

BW-3210L Wr Flex Ratcheting Box 3/8" . . . . . . . . . . . . . . . . . . . . . . . . . .142







NU

ME

RIC

AL

IND

EX




BW-3220L Wr Flex Ratcheting Box 11/16" . . . . . . . . . . . . . . . . . . . . . . . .142


BW-3250L 12 Pc Wr Flex Ratcheting Box Set-Metric . . . . . . . . . . . . . .142

BW-3251L 8 Pc Wr Flex Ratcheting Box Set Sae . . . . . . . . . . . . . . . . . .142

BW-3258L Wr Flex Ratcheting Box 8mm . . . . . . . . . . . . . . . . . . . . . . . . .142

BW-3259L Wr Flex Ratcheting Box 9mm . . . . . . . . . . . . . . . . . . . . . . . . .142

BW-3260AL Wr Flex Ratcheting Box 11mm . . . . . . . . . . . . . . . . . . . . . . . .142

BW-3260L Wr Flex Ratcheting Box 10mm . . . . . . . . . . . . . . . . . . . . . . . .142









BW-3330R 4 Pc Wr Rev Ratcheting Dbl Box Set . . . . . . . . . . . . . . . . . . .143

BW-3332R 4 Pc Wr Rev Ratcheting Dbl Box Set-Metric . . . . . . . . . . . .143

BW-6PTNB 6 Pc Polish Long Box End Wrench Set Sae . . . . . . . . . . . .133

BW-9718NB 18 Pc Polish Comb Wr Set Sae / Metric . . . . . . . . . . . . . . .122

BWE-1011MP Open End Wr 10 X 11 mm . . . . . . . . . . . . . . . . . . . . . . . . . . .132






BWE-67MP Open End Wr 6 X 7 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

BWE-89MP Open End Wr 8 X 9 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

BWS-1202P Wr Double Box End 5/16 X 3/8 . . . . . . . . . . . . . . . . . . . . . . . .134




BWS-1214P Wr Double Box End 11/16 X 3/4 . . . . . . . . . . . . . . . . . . . . . . .134

BWS-1216P Wr Double Box End 13/16 X 7/8 . . . . . . . . . . . . . . . . . . . . . . .134

BWS-1218P Wr Double Box End 15/16 X 1 . . . . . . . . . . . . . . . . . . . . . . . . .134

CT-1003 Chisel Cold 5/16 X 3/8 X 5 1/4 . . . . . . . . . . . . . . . . . . . . . . . . .162

CT-1004 Chisel Cold 3/8 X 7/16 X 5 1/2 . . . . . . . . . . . . . . . . . . . . . . . . .162

CT-1006 Chisel Cold 1/2 X 5/8 X 6 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . .162

CT-1008 Chisel Cold 5/8 X 3/4 X 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162

CT-1010 Chisel Cold 3/4 X 7/8 X 7 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . .162

CT-105 Chisel Cold 5pc Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

CT-1108 Chisel Long Cold 5/8 X 3/4 X 12 . . . . . . . . . . . . . . . . . . . . . . . .162

CT-1110 Chisel Long Cold 3/4 X 7/8 X 12 . . . . . . . . . . . . . . . . . . . . . . . .162

CT-114 Chisel And Punch Set 14 Pc . . . . . . . . . . . . . . . . . . . . . . . . .161

CT-1156 Chisel Flat Cape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162

CT-1204 Chisel Round Nose 3/8 X 1/4 X 5 1/2 . . . . . . . . . . . . . . . . . . .162

CT-1254 Chisel Diamond Point 3/8 X 3/16 X 5 . . . . . . . . . . . . . . . . . . .162

CT-1303 Punch Center 3/8 X 5/32 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1304 Punch Center 7/16 X 3/16 X 5 1/2 . . . . . . . . . . . . . . . . . . . . . . .163

CT-1306 Punch Center 1/2 X 1/4 X 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1314 Punch Scribing 3/8x 5/32 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . .164

CT-1404 Punch Hand 3/8 X 3/16 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1453 Punch Pin 5/16 X 1/8 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1454 Punch Pin 5/16 X 5/32 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1456 Punch Pin 5/16 X 3/16 X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1464 Punch Pin 3/8 X 1/4 X 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1466 Punch Pin 1/2 X 5/16 X 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1509 Punch Aligning 5/8 X 1/4 X 11 . . . . . . . . . . . . . . . . . . . . . . . . .164

CT-1554 Punch Taper 1/2 X 5/32 X 8 1/2 . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1556 Punch Taper 1/2 X 3/16 X 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1558 Punch Taper 5/8 X 5/16 X 11 . . . . . . . . . . . . . . . . . . . . . . . . . . .163

CT-1606 Bar Pinch 1/2 X 5/8 X 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164

CT-1610 Bar Pinch 5/8 X 3/4 X 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164

CT-1617 Bar Pry 1/2 X 1 15/16 X 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164

CT-1620 Bar Pry 5/8 X 2 5/8 X 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164

CT-205 Punch Pin 5pc Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

DT-55 Screw Extractor Set 5pc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

ET-1005 Puller Midget Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

ET-1007 Puller 6 Reversable Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

ET-1008 Puller 7 Adjustable Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

ET-1010 Puller 9 Reversible Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

ET-1011 Puller 10 Adjustable Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

ET-1068A Puller Pilot Bearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

ET-1071A Puller Battery Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

ET-1156A Puller Hd Universal Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

ET-1170A Puller 8 In 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

ET-1205 Puller Tapered Bearing 2 1/4 . . . . . . . . . . . . . . . . . . . . . . . . .168

ET-1207 Puller Tapered Bearing 4 1/2 . . . . . . . . . . . . . . . . . . . . . . . . .168

ET-1322 Puller Gear And Pulley . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

ET-1328A Puller Steering Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170





NU

ME

RIC

AL

IND

EX




ET-1330 Puller Set Harmonic Balance . . . . . . . . . . . . . . . . . . . . . . . . .170

ET-1710 Puller Body Dent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

EW-40NB 10 Pc Open End Ignition Wr Set . . . . . . . . . . . . . . . . . . . . . . .133

FN-1012MP Wr Flare Nut 10x12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135


FN-1402P Wr Flare Nut 3/8x7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

FN-1404P Wr Flare Nut 1/2x9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

FN-1406P Wr Flare Nut 5/8x11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

FN-1410P Wr Flare Nut 3/4" X1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135



FN-4MNB 4 Pc Flare Nut Wr Set Metric . . . . . . . . . . . . . . . . . . . . . . . . .134

FN-4PTNB 4 Pc Flare Nut Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

FN-8PTNB 8 Pc Flare Nut Wr Set Sae / Metric . . . . . . . . . . . . . . . . . . . .134

FN-911MP Wr Flare Nut 9x11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

FT-1103 Blade Hacksaw 12" 18 Teeth High Speed . . . . . . . . . . . . . .180

FT-1124 Blade Hacksaw 12" 24 Teeth Flex . . . . . . . . . . . . . . . . . . . . .180

FT-1202 Hacksaw Adjustable Frame . . . . . . . . . . . . . . . . . . . . . . . . . .180

FT-1204 Hacksaw Adjustable Frame Deluxe . . . . . . . . . . . . . . . . . . .180

GW-1208 Skt 1/4 Dr 8pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1210 Skt 1/4 Dr 8pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1212 Skt 1/4 Dr 8pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1406 Skt 1/4 Dr Deep 12 Pt 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1407 Skt 1/4 Dr Deep 12 Pt 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1408 Skt 1/4 Dr Deep 12 Pt 12 Pt . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1409 Skt 1/4 Dr Deep 12 Pt 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1410 Skt 1/4 Dr Deep 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1411 Skt 1/4 Dr Deep 12 Pt 11/32 . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1412 Skt 1/4 Dr Deep 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1414 Skt 1/4 Dr Deep 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1416 Skt 1/4 Dr Deep 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1506 Skt 1/4 Dr Deep 6 Pt 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1507 Skt 1/4 Dr Deep 6 Pt 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1508 Skt 1/4 Dr Deep 6 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1509 Skt 1/4 Dr Deep 6 Pt 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1510 Skt 1/4 Dr Deep 6 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1511 Skt 1/4 Dr Deep 6 Pt 11/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1512 Skt 1/4 Dr Deep 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1514 Skt 1/4 Dr Deep 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1516 Skt 1/4 Dr Deep 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1605 Skt 1/4 Dr 6 Pt 5/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-1605M Skt 1/4 Dr 12 Pt 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1606 Skt 1/4 Dr 6 Pt 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-1606M Skt 1/4 Dr 12 Pt 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1607 Skt 1/4 Dr 6 Pt 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-1607M Skt 1/4 Dr 12 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1608 Skt 1/4 Dr 6 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-1608M Skt 1/4 Dr 12 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1609 Skt 1/4 Dr 6 Pt 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-1609M Skt 1/4 Dr 12 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1610 Skt 1/4 Dr 6 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-1610M Skt 1/4 Dr 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1611 Skt 1/4 Dr 6 Pt 11/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-1611M Skt 1/4 Dr 12 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1612 Skt 1/4 Dr 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-1612M Skt 1/4 Dr 12 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1613M Skt 1/4 Dr 12 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

GW-1614 Skt 1/4 Dr 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-1616 Skt 1/4 Dr 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-1705 Skt 1/4 Dr 12 Pt 5/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1706 Skt 1/4 Dr 12 Pt 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1707 Skt 1/4 Dr 12 Pt 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1708 Skt 1/4 Dr 12 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1709 Skt 1/4 Dr 12 Pt 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1710 Skt 1/4 Dr 12 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1711 Skt 1/4 Dr 12 Pt 11/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1712 Skt 1/4 Dr 12 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1714 Skt 1/4 Dr 12 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-1716 Skt 1/4 Dr 12 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-504M Skt 1/4 Dr Deep 6 Pt 4mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100






GW-510M Skt 1/4 Dr Deep 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .100




GW-604M Skt 1/4 Dr 6 Pt 4mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-605M Skt 1/4 Dr 6 Pt 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-606M Skt 1/4 Dr 6 Pt 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99





NU

ME

RIC

AL

IND

EX


GW-607M Skt 1/4 Dr 6 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-608M Skt 1/4 Dr 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-609M Skt 1/4 Dr 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-610M Skt 1/4 Dr 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-611M Skt 1/4 Dr 6 Pt 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-612M Skt 1/4 Dr 6 Pt 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-613M Skt 1/4 Dr 6 Pt 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-645M Skt 1/4 Dr 6 Pt 4.5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-655M Skt 1/4 Dr 6 Pt 5.5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-705M Skt 1/4 Dr 12 Pt Dr 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-706M Skt 1/4 Dr 12 Pt Dr 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-707M Skt 1/4 Dr 12 Pt Dr 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-708M Skt 1/4 Dr 12 Pt Dr 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-709M Skt 1/4 Dr 12 Pt Dr 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-710M Skt 1/4 Dr 12 Pt Dr 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-711M Skt 1/4 Dr 12 Pt Dr 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-712M Skt 1/4 Dr 12 Pt Dr 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-713M Skt 1/4 Dr 12 Pt Dr 13mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-755M Skt 1/4 Dr 12 Pt Dr 5.5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

GW-9545 Spinner Flex Handle 1/4 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-9550 Spinner Handle 1/4 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-9578 Universal Joint 1/4 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

GW-9749B Flex Handle 1/4 Dr X 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

GW-9898 Extension 1/4 Dr X 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

GW-9899 Extension 1/4 Dr X 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

GW-9935B Ratchet 1/4 Dr Round Head Flex . . . . . . . . . . . . . . . . . . . . . . .98

GW-9945B Ratchet 1/4 Dr Round Head . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

GW-9945BR Ratchet Renewal Kit 1/4 Dr (Gw 9945b / Gw 9935b) . . . . . . .98

GW-9946R Rotator® Ratchet 1/4 Dr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

GW-9955B Ratchet 1/4 dr round head polished q.r. . . . . . . . . . . . . . . . . .98

HT-1005-1 Hammer Ball Pein 16 Oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160



HT-1255 Hammer Rubber Mallet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

HT-1452 Hammer Soft Face 12oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

HT-1452T Hammer Replacement Tip For Ht 1452 . . . . . . . . . . . . . . . . .160

HT-1453 Hammer Soft Face 20oz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

HW-1507M Skt 3/8 Dr Deep 6 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106



HW-1510 Skt 3/8 Dr Deep 6 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HW-1510M Skt 3/8 Dr Deep 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . .106


HW-1512 Skt 3/8 Dr Deep 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106



HW-1514 Skt 3/8 Dr Deep 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106



HW-1516 Skt 3/8 Dr Deep 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106


HW-1518 Skt 3/8 Dr Deep 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106



HW-1520 Skt 3/8 Dr Deep 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HW-1520S Skt 3/8 Dr Spark Plug 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

HW-1522 Skt 3/8 Dr Deep 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HW-1524 Skt 3/8 Dr Deep 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HW-1526 Skt 3/8 Dr Deep 6 Pt 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HW-1526S Skt 3/8 Dr Spark Plug 13/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .104

HW-1528 Skt 3/8 Dr Deep 6 Pt 7/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HW-1530 Skt 3/8 Dr Deep 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HW-1532 Skt 3/8 Dr Deep 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HW-1607M Skt 3/8 Dr Deep 12 Pt 7mm . . . . . . . . . . . . . . . . . . . . . . . . . .107



HW-1610M Skt 3/8 Dr Deep 12 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . .107










HW-9404M Skt Bit 3/8 Dr Hex 4mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110





HW-9410M Skt Bit 3/8 Dr Hex 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110





NU

ME

RIC

AL

IND

EX




HW-9442 Skt Bit 3/8 Dr Hex 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HW-9443 Skt Bit 3/8 Dr Hex 9/64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HW-9444 Skt Bit 3/8 Dr Hex 5/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HW-9445 Skt Bit 3/8 Dr Hex 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HW-9446 Skt Bit 3/8 Dr Hex 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HW-9447 Skt Bit 3/8 Dr Hex 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HW-9448 Skt Bit 3/8 Dr Hex 7/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HW-9449 Skt Bit 3/8 Dr Hex 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HW-9450 S/D Bit 3/8 Dr Phillips #1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108




HW-9504 S/D Bit 3/8 Dr 3/16 Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

HW-9505 S/D Bit 3/8 Dr 1/4 Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

HW-9506 S/D Bit 3/8 Dr 5/16 Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

MF-006 6 Pc Satin Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . . .127


MF-008M 8 Pc Satin Comb Wr Set Metric . . . . . . . . . . . . . . . . . . . . . . .127

MF-011 11 Pc Satin Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . .126

MF-011M 11 Pc Comb Wr Set Metric . . . . . . . . . . . . . . . . . . . . . . . . . . .127

MF-014 14 Pc Comb Wr Set Sae . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126


MF-017M 17 Pc Satin Comb Wr Set Metric . . . . . . . . . . . . . . . . . . . . . .126

MT-1020-1 Feeler Gauge Non Magnetic 6 Pc . . . . . . . . . . . . . . . . . . . . .172

MT-1021A Feeler Gauge High Energy 6 Wire . . . . . . . . . . . . . . . . . . . . .172

MT-1022 Feeler Gauge Go No Go 22 Blade . . . . . . . . . . . . . . . . . . . . .174

MT-1024 Feeler Gauge Spark Plug + Ignition 23 Pc . . . . . . . . . . . . . .172

MT-1026A Feeler Gauge High Energy Spark Plug 6 Wire . . . . . . . . . .173

MT-1027A Feeler Gauge High Energy Spark Plug 7 Wire . . . . . . . . . .173

MT-1040-1 Feeler Gauge Regular Spark Plug 9 Pc . . . . . . . . . . . . . . . . .173

MT-1041 Feeler Gauge Regular 16 Pc . . . . . . . . . . . . . . . . . . . . . . . . . .173

MT-1042 Feeler Gauge Ignition 12 Pc . . . . . . . . . . . . . . . . . . . . . . . . . .173

MT-1043 Feeler Gauge Go No Go 15 Pc . . . . . . . . . . . . . . . . . . . . . . . . .174

MT-1048 Feeler Gauge Standard 10 Pc . . . . . . . . . . . . . . . . . . . . . . . . .174

MT-1049 Feeler Gauge All Purpose 25 Pc . . . . . . . . . . . . . . . . . . . . . .174

PT-1002-1 Pliers Hd Slip Joint 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

PT-1003-1 Pliers Slip Joint Comb 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

PT-1004-1 Pliers Slip Joint Comb 10 . . . . . . . . . . . . . . . . . . . . . . . . . . .154

PT-1050 Pliers Wire Stripper Crimper 8 . . . . . . . . . . . . . . . . . . . . . . .157

PT-1052-1 Pliers Diag Cutting 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

PT-1057-1 Pliers Hd Diag Cutting 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

PT-1060-1 Pliers Lg Diag Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

PT-1105 Pliers Locking 5" Curved Jaw . . . . . . . . . . . . . . . . . . . . . . . . .155

PT-1106 Pliers Locking 6" Long Nose . . . . . . . . . . . . . . . . . . . . . . . . . .155

PT-1107 Pliers Locking 7" Straight Jaw . . . . . . . . . . . . . . . . . . . . . . . .155

PT-1108-1 Pliers Linesman 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157

PT-1110 Pliers Locking 10" Curved Jaw . . . . . . . . . . . . . . . . . . . . . . . .155

PT-1128-1 Pliers Longnose Sidecut 6 1/2 . . . . . . . . . . . . . . . . . . . . . . .156

PT-1149-1 Pliers Curved Needle Nose 6 . . . . . . . . . . . . . . . . . . . . . . . .157

PT-1150 Pliers Midget Diagonal Cut 5 . . . . . . . . . . . . . . . . . . . . . . . . .156

PT-1154 Pliers Midget Needle Nose 5 1/2 . . . . . . . . . . . . . . . . . . . . . .156

PT-1178 Pliers Duckbill Wiring 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157

PT-1248-1 Pliers Large Riblock 12 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . .154

PT-1250-1 Pliers Riblock 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

PT-1251 Pliers Ignition 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

PT-1259 Pliers Battery 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157

PT-1262 Plier Brake Spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175

PT-1263 Pliers Hd Parrot Nose 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

PT-1266 Pliers Lock Ring 7 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

PT-1280-1 Pliers Hose Clamp 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

PT-1285 Pliers Int/Ext Retaining Ring 5 3/4 . . . . . . . . . . . . . . . . . . . . .158

PT-1286 Pliers Combo Hd Internal Retaing Ring 8 1/8 . . . . . . . . . . . .158

PT-1287 Pliers 1pc External Retaining 5 13/16 . . . . . . . . . . . . . . . . . .158

PT-1288 Pliers 1pc Internal Retaining 5 9/16 . . . . . . . . . . . . . . . . . . .158

PT-1289 Pliers Int/Ext Retaining Bent 5 5/8 . . . . . . . . . . . . . . . . . . . . .158

PT-1300 Pliers Straight Nose Long Reach 11 1/2 . . . . . . . . . . . . . . . .155

PT-1310 Pliers Bent Nose Long Reach 11 1/2 . . . . . . . . . . . . . . . . . . .155

PT-1320 Pliers Long Reach Cutter/Gripper 11 . . . . . . . . . . . . . . . . . . .155

PT-3000 4 Pc Mini Long Reach Plier Set . . . . . . . . . . . . . . . . . . . . . . .155

ST-1004S S/D 4 X 1/4 Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

ST-1006S S/D 6 X 5/16 Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

ST-1008S S/D 8 X 3/8 Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

ST-1010S S/D 10 X 3/8 Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

ST-1024S S/D 4 X 1/4 Sq Shank Slotted Tip . . . . . . . . . . . . . . . . . . . . .147

ST-1026S S/D 6 X 5/16 Sq Shank Slotted Tip . . . . . . . . . . . . . . . . . . . .147

ST-1028S S/D 8 X 3/8 Sq Shank Slotted Tip . . . . . . . . . . . . . . . . . . . . .147

ST-1032S S/D 10 X 3/8 Sq Shank Slotted Tip . . . . . . . . . . . . . . . . . . . .147

ST-1043S S/D 3 X 3/16 Elec Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . .147

ST-1046S S/D 6 X 3/16 Elec Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . . .147

ST-1048S S/D 10 X 3/16 Elec Slotted Tip . . . . . . . . . . . . . . . . . . . . . . . .147

ST-104S 4 Pc Combo Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . .147

ST-105S 5 Pc Phillips Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . .146





NU

ME

RIC

AL

IND

EX


ST-106S 5 Pc Slotted Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . .146

ST-107S 7 Pc Combo Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . .146

ST-1081S S/d 3 x no. 1 pt. Phillips tip . . . . . . . . . . . . . . . . . . . . . . . . . . .147



ST-1084S S/d 10 x no. 2 pt. Phillips tip . . . . . . . . . . . . . . . . . . . . . . . . . .147

ST-1140S S/d 1 1/2 x no. 2 pt. Stubby phillips tip . . . . . . . . . . . . . . . . .147

ST-1145S S/D 1 1/2 X 1/4 Stubby Slotted Tip . . . . . . . . . . . . . . . . . . . . .147

ST-1150S S/D 2 X 1/8 Pocket Slotted Tip . . . . . . . . . . . . . . . . . . . . . . .147

ST-1151S S/d 2 x no. 0 pt. Pocket phillips tip . . . . . . . . . . . . . . . . . . .147

ST-1166 Screw Starter Slotted 2 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . .148



ST-1171 Screw Starter Phillips 5 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-1183 S/D Offset 3/16 X 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-1184 S/D Offset 3/16 X 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-1185 S/D Offset 1/4 X 4 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-1214 S/D Spark Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-1250 Inspection Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

ST-127S 7 Pc Torx Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

ST-608S S/D Torx T8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-610S S/D Torx T10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-615S S/D Torx T15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-620S S/D Torx T20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-625S S/D Torx T25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-627S S/D Torx T27 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-630S S/D Torx T30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-800 Nut Driver 3/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-801 Nut Driver 9/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-803 Nut Driver 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-806 Nut Driver 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-809 Nut Driver 11/32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-812 Nut Driver 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-815 Nut Driver 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-818 Nut Driver 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-828 Nutdriver Set Standard 8 Pc . . . . . . . . . . . . . . . . . . . . . . . . . .148

ST-829M Nutdriver Set Metric 9 Pc . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-904M Nut Driver 4mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-905M Nut Driver 5mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-907M Nut Driver 7mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-908M Nut Driver 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-909M Nut Driver 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-910M Nut Driver 10mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-911M Nut Driver 11mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-912M Nut Driver 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

ST-955M Nut Driver 5.5 Mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149

TR-3210 Skt 1/4 Dr Tamper Resistent Torx® T10 . . . . . . . . . . . . . . . .101






TR-3340 Skt 3/8 Dr Tamper Resistant Torx Internal T10 . . . . . . . . . .109



TS-1209 Skt 1/4 Dr Internal Torx® T9 . . . . . . . . . . . . . . . . . . . . . . . . . .101

TS-1210 Skt 1/4 Dr Internal Torx® T10 . . . . . . . . . . . . . . . . . . . . . . . . .101






TS-1340 Skt 3/8 Dr Internal Torx® T40 . . . . . . . . . . . . . . . . . . . . . . . .109





TS-1460 1/2" Drive Torx Sockets Internal T60 . . . . . . . . . . . . . . . . . .116

TS-2204 Skt 1/4 Dr External Torx® E4 . . . . . . . . . . . . . . . . . . . . . . . . .101






TS-2310 Skt 3/8 Dr External Torx® E10 . . . . . . . . . . . . . . . . . . . . . . . .109




TS-2418 1/2" Drive Torx Sockets External E18 . . . . . . . . . . . . . . . . .116

TS-612NB 12 Pc 1/4" & 3/8" Dr Internal Torx Socket Set . . . . . . . . . . . .95

TS-627NB 12 Pc 1/4" & 3/8" Dr External Torx Socket Set . . . . . . . . . . . .96

U-1500 8 Piece Impact Socket Set . . . . . . . . . . . . . . . . . . . . . . . . . . . .84





NU

ME

RIC

AL

IND

EX




U-1501M 8 Piece Metric Impact Socket Set . . . . . . . . . . . . . . . . . . . . . .84

U-1508 Skt 3/8 Dr Impact 6 Pt 1/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

U-1508M Skt 3/8 Dr Impact 6 Pt 8mm . . . . . . . . . . . . . . . . . . . . . . . . . . .111

U-1509M Skt 3/8 Dr Impact 6 Pt 9mm . . . . . . . . . . . . . . . . . . . . . . . . . . .111

U-1510 Skt 3/8 Dr Impact 6 Pt 5/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

U-1510M Skt 3/8 Dr Impact 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . .111

U-1512 Skt 3/8 Dr Impact 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110



U-1514 Skt 3/8 Dr Impact 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .110



U-1516 Skt 3/8 Dr Impact 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110


U-1518 Skt 3/8 Dr Impact 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .110



U-1520 Skt 3/8 Dr Impact 6 Pt 5/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

U-1522 Skt 3/8 Dr Impact 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . .110

U-1524 Skt 3/8 Dr Impact 6 Pt 3/4 . . . . . . . . . . . . . . . . . . . . . . . . . . . .110



U-1610 Skt 3/8 Dr Impact Deep 6 Pt 15/16 . . . . . . . . . . . . . . . . . . . . .111

U-1610M Skt 3/8 Dr Impact 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . .111


U-1612 Skt 3/8 Dr Impact Deep 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . .111



U-1614 Skt 3/8 Dr Impact Deep 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . .111



U-1616 Skt 3/8 Dr Impact Deep 6 Pt 1/2 . . . . . . . . . . . . . . . . . . . . . . .111









UW-1500 Skt 1/2 Dr Impact Wheel Lug . . . . . . . . . . . . . . . . . . . . . . . . . .116

UW-1505 Skt 1/2 Dr Impact Wheel Lug Kit . . . . . . . . . . . . . . . . . . . . . .116

UW-1512 Skt 1/2 Dr Impact Deep 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . .117

UW-1514 Skt 1/2 Dr Impact Deep 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . .117


UW-1518 Skt 1/2 Dr Impact Deep 6 Pt 9/16 . . . . . . . . . . . . . . . . . . . . . .117


UW-1522 Skt 1/2 Dr Impact Deep 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . .117





UW-1532 Skt 1/2 Dr Impact Deep 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . .117

UW-1534 Skt 1/2 Dr Impact Deep 6 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . .117

UW-1536 Skt 1/2 Dr Impact Deep 6 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . .117

UW-1612 Skt 1/2 Dr Impact 6 Pt 3/8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

UW-1614 Skt 1/2 Dr Impact 6 Pt 7/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . .116




UW-1622 Skt 1/2 Dr Impact 6 Pt 11/16 . . . . . . . . . . . . . . . . . . . . . . . . . . .116





UW-1632 Skt 1/2 Dr Impact 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

UW-1634 Skt 1/2 Dr Impact 6 Pt 1 1/16 . . . . . . . . . . . . . . . . . . . . . . . . . .116

UW-1636 Skt 1/2 Dr Impact 6 Pt 1 1/8 . . . . . . . . . . . . . . . . . . . . . . . . . . .116



UW-24 Extension Impact1/2 Dr X 5 . . . . . . . . . . . . . . . . . . . . . . . . . . .118





UW-2432 Skt 3/4 Dr Impact 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120











NU

ME

RIC

AL

IND

EX




UW-25 Extension Impact 1/2 Dr X 10 . . . . . . . . . . . . . . . . . . . . . . . . . .118





UW-2632 Skt 3/4 Dr Impact Deep 6 Pt 1 . . . . . . . . . . . . . . . . . . . . . . . . .120







UW-2646 Skt 3/4dr Impact Deep 6 Pt 1 7/16 . . . . . . . . . . . . . . . . . . . . . .120

UW-2648 Skt 3/4dr Impact Deep 6 Pt 1 1/2 . . . . . . . . . . . . . . . . . . . . . . .120

UW-30 Extension Impact1/2 Dr X 3 . . . . . . . . . . . . . . . . . . . . . . . . . . .118

UW-30 Extension Impact 1/2 Dr X 2 5/8 . . . . . . . . . . . . . . . . . . . . . . .116

UW-510M Skt 1/2 Dr Impact Deep 6 Pt 10mm . . . . . . . . . . . . . . . . . . . .117
















UW-610M Skt 1/2 Dr Impact 6 Pt 10mm . . . . . . . . . . . . . . . . . . . . . . . . . .117















UWP-1460 Skt 1 Dr Budd Wheel 13/16 & 1 1/2 . . . . . . . . . . . . . . . . . . . .120

UWP-430M Skt 1/2 Dr Axle Nut Deep 6 Pt 30mm . . . . . . . . . . . . . . .116, 120

UWP-436M Skt 1/2 Dr Axle Nut Deep 6 Pt 36mm . . . . . . . . . . . . . . . .116120

UWP-660 Skt 3/4 Dr Budd Wheel 13/16 & 1 1/2 . . . . . . . . . . . . . . . . . . .120

XT-1011 Wr Distributor 1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175

XT-1012 Wr Distributor 9/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175

XT-1060 Separator Ball Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

ZT-1102 Scraper Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

ZT-1111 Scraper Carbon 1 1/4 X 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

ZT-1112 Degreasing Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

ZT-1125 Tubing Bender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178

ZT-1180 Holder Flexible Retriever . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

ZT-1193 Magnetic Pick Up Tool 16 1/2 To 27 . . . . . . . . . . . . . . . . . . . .176

ZT-1197 Magnetic Pick Up Tool 18 . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

ZT-1300 Brush Knot End Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178

ZT-1301 Brush Carbon Cleaning End . . . . . . . . . . . . . . . . . . . . . . . . . .178

ZT-1305 Wire Wheel Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178

ZT-1310 Brush Tire And Rim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

ZT-1312 Brush And Scraper Heavy D . . . . . . . . . . . . . . . . . . . . . . . . . .179

ZT-1550 Separator Shock Absorber Link . . . . . . . . . . . . . . . . . . . . . . .176

ZW-1045A-A Wr Ratcheting A/C 1/4 X 3/16 Sq 1/2 X 9/16 Hex . . . . . . . . .135

ZW-53 13 Pc Set Hex Key Wrench Set Sae . . . . . . . . . . . . . . . . . . . .152

ZW-59 13 Pc Long Hex Key Wrench Set Sae . . . . . . . . . . . . . . . . . .152

ZW-69 9 Pc Hex Key Wrench Set Metric . . . . . . . . . . . . . . . . . . . . .152





NU

ME

RIC

AL

IND

EX




LIMITED LIFETIME WARRANTY

The Stanley Works and Proto Industrial Tools (collectively referred to as “TSW/Proto”) warrants any of its manufactured products for the useful life of the product against deficiency in material or workmanship.

Torque Wrenches, Multipliers and Testers are warranted for one year, except for calibration which is warranted for 90 days from date of purchase. Torque products can be repaired and recalibrated for a nominal charge at the Stanley-Proto® Authorized repair center (2195 East View Parkway, Suite 103, Conyers, GA 30013). Defects in material or workmanship will be repaired or replaced at no cost, all other repairs will be at a nominal charge. Torque products areprecise measuring devices that require care in handling. Stanley-Proto® recommends that all micrometer wrenches berecalibrated once a year or more, depending on usage.

Disclaimers and limitations:• Is subject to the disclaimers and limitations described below and is in lieu of all other warranties, express or implied,

including the implied warranty of merchantability or fitness for a particular purpose.• Gives you specific legal rights. You may also have other rights that vary by state.• Does not extend to products that have been improperly used, altered, or repaired by any entity other than TSW/Proto.• Does not extend to any claim for incidental, consequential, or special damages. Some states do not allow the

exclusion of limitation of incidental or consequential damages, so this exclusion may not apply to you.• TSW/Proto makes no representations beyond those contained in this Limited Lifetime Warranty.• Agents of TSW/Proto have no authority to make representations of any sort beyond those contained in this Limited

Lifetime Warranty.

Exclusive remedy and claim procedure:• The exclusive remedy under this Limited Lifetime Warranty for products determined to be deficient in materials or

workmanship by TSW/Proto is repair or replacement with a reconditioned tool of equal value by TSW/Proto.• The selected remedy is at the sole discretion of TSW/Proto. In no event shall TSW/Proto be responsible for more than

the original purchase price of the product.

Questions:To ask questions about, or to make a claim under this Limited Lifetime Warranty, contact your Stanley-Proto TerritoryManager or a Manufacturer’s Representative.


©2005 The Stanley Works2195 East View Parkway, Suite 103, Conyers, GA 30013

1-800-800-TOOL www.stanleyproto.comT20505

T20505_BHBP_Cover 6/28/05 1:09 PM Page 2

3/8" d rive s ocket s ets

Documents