6_0 beta readme

7/30/2019 6_0 Beta ReadMe

1/20

QuarkXPress and QuarkXPress Passport 6.0 Pre-release ReadMe

Thank you for your participation in the QuarkXPress Beta

Testing program. Please remember that your participation in

this program is subject to the terms of your Global Pre-Release

License Agreement with Quark, Inc.

This document contains important information about

QuarkXPress and QuarkXPress Passport pre-release software.

Please read this document for information about installing

QuarkXPress and for any last-minute information about the

software.

QuarkXPress 6.0 contains several new features and enhance-

ments. For a brief list of these changes, see Whats New in

QuarkXPress 6.0, included on the QuarkXPress CD-ROM. For

detailed information about how to use each enhancement,

see theA Guide to QuarkXPress Addendum, included on the

QuarkXPress CD-ROM.

Topics

Feedback Guidelines

Minimum System Requirements

Before You Install QuarkXPress

Installing QuarkXPress on Mac OS

Installing QuarkXPress on Windows

Activating QuarkXPress

Important Feature Information

Documentation Errata

Known Problems

Legal Notices

Page 1


2/20


3/20


Minimum System Requirements

Mac OS

Hardware PowerPC-based computer

G3 or faster processor

CD-ROM drive (or access to a CD-ROM over the network)

for installation

Available RAM: 128MB

Available hard disk space for installation: 230MB

Site licenses only: TCP/IP-compatible network

Software

Mac OS 10.2

Optional

PostScript printer with 2MB of RAM (additional printer

memory may be required for graphic-intensive documents)

An Internet connection and Microsoft Internet Explorer

version 5.0 or later, Netscape Navigator version 6.0 or later,or Safari for online registration

Windows

Hardware

Pentium or faster processor

CD-ROM drive (or access to a CD-ROM over the network)

for installation

Available RAM: 128MB

Available hard disk space for installation: 190MB

Site licenses only: TCP/IP-compatible network

Software

Windows 2000 (Home or Professional) or Windows XP(Home or Professional)

Optional

Windows-compatible PostScript printer with 2MB of RAM

(additional printer memory may be required for graphic-

intensive documents)

An Internet connection and Microsoft Internet Explorer ver-

sion 5.0 or later, or Netscape Navigator version 6.0 or later

for online registration

TopicsPage 3


4/20


Before You Install QuarkXPress

You can register QuarkXPress 6.0 when you install it. If you

have a single-user copy of QuarkXPress, you must activate theapplication when you launch it. If you have an Internet con-

nection, you can register and activate QuarkXPress.

If you do not activate QuarkXPress, you can use it for five days;

after five days, it will become a demo version and must be acti-

vated before it will run as a full version.

You can install QuarkXPress on one hardware configuration per

year without reactivating it; after you install QuarkXPress on

the second hardware configuration, QuarkXPress must be reacti-vated. Reinstalling QuarkXPress on the same machine or restor-

ing a machine from a backup will not require reactivation.

For information about how to activate QuarkXPress, see the

Activating QuarkXPress section of this document.

TopicsPage 4


5/20


Installing QuarkXPress on Mac OS

1 Disable any virus protection software. If you are concerned

about a virus infecting your computer, use virus protection soft-

ware to check your hard drive and the discs provided by Quark.

2 Restart the computer.

3 Insert the CD-ROM into your computer or mount the

QuarkXPress CD-ROM over the network.

4 Double-click the QuarkXPress Installer icon on the

QuarkXPress CD-ROM.

5 The Authenticate dialog box displays. Enter your adminis-

trator name and password in the appropriate fields, and then

click OK.

6 The QuarkXPress 6.0 Installerscreen displays. Click Continue.

NOTE This is a new installation of QuarkXPress; running this

installer will not install any third-party XTensions software or

XPress Preferences files from previous versions of QuarkXPress.

7 The License Agreement screen displays. Read the License

Agreement carefully. If you accept the terms in the agreement,click Accept. If you do not accept the terms, click Decline.

NOTE If you do not accept the terms of the license agree-

ment, you will not be able to install QuarkXPress.

8 If you clicked Accept, the Validation Code screen displays.

Enter the validation code provided in the product package.

NOTE Do not discard the validation code. It may be required

for reinstallations.

9 After entering the validation code, click Next. The User Reg-

istration screen displays. Enter your information in the appro-

priate fields. Click Next.

If Quark License Administrator is installed, please see the

Installing QuarkXPress with Quark License Administrator

section of this document for help entering Quark License

Administrator information. If Quark License Administratoris not installed, proceed to the next step.

10 The QuarkXPress 6.0 Installerscreen displays.

Choose Complete Install from the pop-up menu if you

want to install all the program files. This option takes the

most disk space.

Choose Custom Install from the pop-up menu if you want

to install only selected program files. This option is recom-

mended for experienced QuarkXPress users.

11 If you chose Custom Install, the Custom Install list dis-

plays. Click a disclosure box to see individual files. If you want

a file to be installed, check the box next to it. Only checked

items will be installed. To see a description of the file, click the

I button after its name.

TopicsPage 5


6/20


Installing QuarkXPress on Mac OS, continued

NOTE QuarkXPress may install required files that are not

displayed in the Custom Install list.

12 The Install Location area at the bottom of the screen dis-

plays the path to the folder or volume where QuarkXPress will

be installed. If you want to install QuarkXPress in another loca-

tion, choose Select Folderfrom the Install Location pop-up

menu. Navigate to the desired folder; click Choose when done.

You will return to the QuarkXPress 6.0 Installerscreen.

NOTE In the beta version, you must install to the default

location if you want to install additional files later.

13When you have selected the files you want to install andverified the location where QuarkXPress will be installed, click

Install. As items are installed, the Installingstatus bar pro-

gresses from empty to full.

14 After installation is finished, a screen displays asking if

you want to register QuarkXPress online. If you click Yes, the

installer will proceed to register your software with Quark.

If the QuarkXPress Installer software is unable to find a Web

browser to process your registration, the installation will becompleted without registering your software. To register your

software later, follow the steps outlined in Performing Online

Registration After Installation.

15 After registration (if you specified this in step 13), an alert

displays: The software was successfully installed. If you did

not specify registration, the alert displays immediately after

installation. Click Quit.

Performing online registration at installation

If you clicked Yes to register during installation, the Online

Registration form will automatically open in your Web

browser. The fields will contain the information you entered

in the User Registration screen; you can also modify the

information before submitting it.

1 Review the information in the form; re-enter data as neces-

sary and click Submit to submit your registration. The Web

browser will submit the information to Quark.

2 Once your information has been received by Quark, the

Web browser will display a window stating that registration

was successful. You can then exit the Web browser.

NOTE If the QuarkXPress Installer software is unable to find a

Web browser or process your registration, the installation will

be completed without registering your software. To register

your software, follow the steps outlined in Performing Online

Registration After Installation.

NOTE To register QuarkXPress using your Web browser,

make sure you meet the optional system requirements listed

in Minimum System Requirements.

TopicsPage 6


7/20



Performing online registration after installation

When QuarkXPress is installed, a folder called Registration

Folder is created. The Register.htm file in this folder allows

you to register using any computer that has Internet accessand a Web browser that can perform online registration. (Refer

to the optional system requirements for specific information

about the Web browser.)

1 Use the File menu in your Web browser to open the

Register.htm file in the Registration Folder folder, or

double-click the Register.htm file to launch the Web

browser and open the file.










Adding files after installation

1 Repeat steps 18 in Installing QuarkXPress on Mac OS.

2 The QuarkXPress 6.0 Installerscreen displays.

3 To install additional files, choose Custom Install from the

pop-up menu. The Custom Install list displays. Click a disclo-

sure box to see individual files. If you want a file to be installed,

check the box next to it. Only checked items will be installed.To see a description of the file, click the I button after its name.

NOTE QuarkXPress may install required files that are not dis-

played in the Custom Install list.

4 The Install Location area at the bottom of the screen displays

the path to the folder or volume where the selected items will

be installed. Click Install. As items are installed, the Installing

status bar progresses from empty to full.

NOTE In the beta version, you must install to the default

location when adding files after installation.

5 When the QuarkXPress files are installed, an alert displays:

The software was successfully installed. Click OK.


Quark License Administrator is software that manages licensed

Quark products. If you have a Multi-Pak or a Lab-Pak, you may

have received a Quark License Administrator CD-ROM whenyou purchased QuarkXPress. Quark License Administrator

should be installed before you install QuarkXPress.

TopicsPage 7


8/20



If Quark License Administrator is installed and you are now

installing QuarkXPress, the License Server Details screen dis-

plays after you enter your validation code. Before proceeding,

verify that you have the information you need to enter valuesin the following fields:

License Server IP Address: Enter the IP address or server

name for the server you have designated as the license server.

The license server handles requests from license clients.

License Server Port: Enter the value for the license server

port. This number is determined when the Quark License

Administrator software is registered online. The license server

port is the port through which license server requests flow.

Backup Server IP Address: Enter the IP address or server name

for the server you have designated as the backup license server.

Backup Server Port: Enter the value for the backup license

server port.

When you have entered the values, click Next. The Installation

Type screen displays. Return to the Installing QuarkXPress

section of this document and follow steps 914.

TopicsPage 8


9/20


Installing QuarkXPress on Windows

1 Disable any virus protection software. If you are concerned

about a virus infecting your computer, use virus protection soft-



3 Insert the CD-ROM into your computer or mount the

QuarkXPress CD-ROM over the network.

4 The installer will automatically launch. An alert displays,

informing you that the system is being configured. When the

configuration is complete, you may be prompted to restart your

computer.

NOTE This is a new installation of QuarkXPress; running this

installer will not install any third-party XTensions software or

XPress Preferences files from previous versions of QuarkXPress.


QuarkXPress CD-ROM. The Quark Welcome screen displays.

Click Next.

6 The Software Verification screen displays. Enter the valida-

tion code provided in the product package. Click Next.

NOTE Do not discard the validation code. It may be required

for reinstallations.

If Quark License Administrator is installed, please see the


section for help entering the Quark License Administrator

information. If Quark License Administrator is not installed,proceed to the next step.

7 The License Agreement screen displays. Read the License

Agreement carefully. If you accept the terms in the agreement,

click Accept. If you do not accept the terms, click Decline.

NOTE If you do not accept the terms in the License Agreement,

you will not be able to install QuarkXPress.

8If you accepted the terms of the

License Agreement,

click Next.

9 The Customer Information screen displays. Enter your orga-

nization information in the Organization field. In the Install

this application for: area, click Only for me or Anyone who

uses this computer (All Power Users for Windows 2000).

Click Next.

10 The User Registration screen displays. Enter your infor-

mation in the appropriate fields. Click Next.11 The Destination Folderscreen displays, showing the

path to the folder where QuarkXPress will be installed. Click

Change to navigate to a different folder. Navigate to the

desired folder; click OK when done.

TopicsPage 9


10/20


Installing QuarkXPress on Windows, continued

12 Once you have selected a folder, click Next. The Setup

Type screen displays.

Check Complete if you want to install all the program files.

This option takes the most disk space.

Check Custom if you want to install only selected pro-

gram files. This option is recommended for experienced

QuarkXPress users.

13 If you clicked Custom, the Custom Setup screen displays.

Click a disclosure box to see individual files. Click a file to see

its description in the Feature Description area. Click the pop-

up menu next to each file name and choose an option:

This feature will be installed on local hard drive.

This feature and all subfeatures will be installed on

local hard drive.

This feature will be installed when required.

This feature will not be available.

(A feature may not display every option.)

If you want to know how much disk space is available beforeyou select files to install, click the Space button. The Disk

Space Requirements screen displays. You can view how much

space is available on the selected drive, and how much space is

required for the files you have selected. Click OK after review-

ing this screen; you will return to the Custom Setup screen.

NOTE QuarkXPress requires that certain files be installed; you

will not be able to deselect them.

14 The Install to area at the bottom of the screen displays

the path to the folder in which QuarkXPress will be installed.

If you want to install QuarkXPress in another folder, click

Change to display the Change Current Destination screen.

Navigate to the desired folder; click OK when done. You will

return to the Setup Type screen.

15 When you have selected the files you want to install and

verified the location where the QuarkXPress folder will be

installed, click Next.

16 The Ready to Install the Program screen displays. If you

want to automatically register online after installation, check

Run online registration after installation.

17 Click Install.

18 When QuarkXPress is installed, the Installation Wizard

Completed screen displays. Click Finish.

Performing online registration at installation

If you checked Run online registration after installation, theOnline Registration form will automatically open in your Web

browser. The fields will contain the information you entered in

the User Registration screen; you can modify the information

before submitting it.

TopicsPage 10


11/20









NOTE If the QuarkXPress Installer software is unable to find a

Web browser or process your registration, the installation will

be completed without registering your software. To register

your software later, follow the steps outlined in Performing

Online Registration After Installation.

Performing online registration after installation

When QuarkXPress is installed, a folder called Registration

Folder is created. The Register.htm file in this folder allows

you to register using any computer that has Internet access and

a Web browser that can perform online registration. (Refer to

the optional system requirements for specific information

about the Web browser.)

1 Use the File menu in your Web browser to open the

Register.htm file in the Registration Folder folder, or

double-click the Register.htm file to launch the Web

browser and open the file.










Adding and removing files after installation

1 Disable any virus protection software. If you are concernedabout a virus infecting your computer, use virus protection soft-




QuarkXPress CD-ROM. The Quark Welcome screen displays.

4 Click Next. The Program Maintenance screen displays.

Click a radio button:

Modify allows you to change which QuarkXPress files are

installed. You can install new files or remove previously

installed files. Use this option to add files after your initial

installation.

TopicsPage 11


12/20



Repairfixes minor problems related to QuarkXPress files,

such as missing shortcuts or files. Use this option if you are

having problems with missing or damaged QuarkXPress

files, shortcuts, or registry entries.

NOTE If you want to remove any installed versions of

QuarkXPress from the computer, use the Repairfeature in

the installer for that application before you use the Windows

Uninstall feature to remove the application. If you do not use

the Repairfeature before using the Uninstall feature, some

files will be incorrectly removed and QuarkXPress 6.0 will not

operate correctly.

NOTE If you did not remove earlier versions of QuarkXPressprior to installing QuarkXPress 6.0, and then used the Windows

Uninstall feature to remove the previous version, thus causing

your copy of QuarkXPress 6.0 to operate incorrectly, you can

use the Repairfeature to fix this problem.

Remove will remove all installed QuarkXPress 6.0 files from

your computer. Use this option when you are installing new

system software, or before reinstalling QuarkXPress.

5 Click Next. If you clicked Modify in the previous screen,

the Custom Setup screen displays. Repeat step 11 of Installing

QuarkXPress, then click Next. The Ready to Modify the Pro-

gram screen displays. Check Install to make your changes.

If you clicked Repairin the previous screen, the Ready to

Repair the Program screen displays. Click Install to begin

repairing program files.

If you clicked Remove in the previous screen, the Remove

the Program screen displays. Click Remove to remove

QuarkXPress 6.0 files.

6 When the QuarkXPress files are installed, repaired, or

removed, the Installation Wizard Completed screen displays.

Click Finish.


Quark License Administrator is software that manages licensedQuark products. If you have a Multi-Pak or a Lab-Pak, you may

have received a Quark License Administrator CD-ROM when

you purchased QuarkXPress. Quark License Administrator should

be installed before you install QuarkXPress.

If Quark License Administrator is installed and you are now

installing QuarkXPress, the License Server Details screen dis-

plays after you enter your validation code. Before proceeding,

verify that you have the information you need to enter values

in the following fields:

License Server IP Address: Enter the IP address or server

name for the server you have designated as the license server.

The license server handles requests from license clients.

TopicsPage 12


13/20



License Server Port: Enter the value for the license server

port. This number is determined when the Quark License

Administrator software is registered online. The license server

port is the port through which license server requests flow.

Backup Server IP Address: Enter the IP address or server name

for the server you have designated as the backup license server.

Backup Server Port: Enter the value for the backup license

server port.

When you have entered the values, click Next. The Installation

Type screen displays. Return to the Installing QuarkXPress

section of this document and follow steps 818.

TopicsPage 13


14/20


Activating QuarkXPress

The first time you launch QuarkXPress the Activate

QuarkXPress 6.0 dialog box displays and requests that

you activate your copy of QuarkXPress. You can do this

automatically over the Internet. To activate QuarkXPress:

1 When the Activate QuarkXPress 6.0 dialog box displays,

click Activate QuarkXPress.

2 A QuarkXPress 6.0 Internet Activation message displays

with a progress bar. When the progress bar is full, a message

displays indicating that QuarkXPress has activated successfully.

Skipping activationIf you do not want to activate QuarkXPress when you launch

it, click Skip. If you click Skip, QuarkXPress presents the

option to activate it every time you launch the application,

until you opt to activate it.

If you do not activate QuarkXPress, you can use it for five days

after installation; after five days, it will become a demo version

and must be activated before it will run as a full version.

TopicsPage 14


15/20


Important Feature Information

Mac OS only: Because QuarkXPress 6.0 runs in Mac OS X

native mode, troubleshooting techniques have changed.

For information about troubleshooting QuarkXPress for

Mac OS, see the TroubleshootingGuide file included on

the QuarkXPress CD-ROM.

QuarkXTensions software versions

All QuarkXTensions software modules have been updated to

version 6.0. These software modules will not load with versions

of QuarkXPress prior to 6.0.

TopicsPage 15


16/20


Documentation Errata

Following is information that was documented incorrectly or

has changed sinceA Guide to QuarkXPress Addendum orA Guide

to QuarkXPress: Using QuarkXPress was published.

The Delete Rollovercommand (Item& Rollovers&

Delete Rollover) has been changed to Remove Rollover.

TheText pop-up menu has been removed from the Colors

area in the following Web layout dialog boxes: New Project

(File& New& Project), New Layout (Layout& New),

Duplicate Layout (Layout& Duplicate), and Layout

Properties (Layout& Layout Properties).

The Modifiable Picture File Formats chart provided in

Chapter 11, Pictures, has been updated sinceA Guide to

QuarkXPress: Using QuarkXPress was published. Following

is the new chart:

Type Color Shade Negative Contrast Halftone

EPS/DCS no no no no no

GIF yes yes no

JPEG (*.JPG)Grayscale yes yes yes yes yes

Color yes yes no

PhotoCD no no yes yes no

PICT (*.PCT) on Mac OS

1-bit yes yes no no yes

Grayscale yes yes yes yes yes

Color no no no no no

Type Color Shade Negative Contrast Halftone

PICT (*.PCT) on Windows

1-bit yes yes yes no yes


Color no no yes yes no

PNG yes yes no

TIFF (*.TIF)



Color yes yes no

Windows .BMP

on Mac OS no no no no noWindows PCX on Mac OS

1-bit no no no yes yes

Grayscale no no no yes yes

Color no no no yes yes

Windows bitmap (*.BMP)/PCX on Windows



Color yes yes no

WMF no no no no no

Adjustable through the Picture Contrast Specifications dialog box (Style&

Contrast).

You can open a book over a network on Mac OS and

Windows at the same time, although you cannot open

a chapter on two computers at the same time.

TopicsPage 16


17/20


Documentation Errata, continued

Windows only: The file extension for an auto-saved version

of a project is now .a$v.

Windows only: A Guide to QuarkXPress: Using QuarkXPress

erroneously states that pressing Ctrl changes the Append

button to Compare in the H&Js dialog box (Edit&H&Js).

The correct key to press for this function is the Alt key.

TopicsPage 17


18/20


Known Problems

When you use the Full Resolution Preview feature, OpenType

fonts within the EPS file may be substituted with the default

system font, even though the EPS font is installed on the com-

puter. If you print the EPS, however, the correct font does print.

Mac OS only: When you install, you must use the default install

location in order to install additional files later.

For a list of other problems that have been found in this ver-

sion of QuarkXPress, visit the Quark Web site at www.quark.com/

products/xpress/beta/testers_60/60_alpha_knownissues.html .

TopicsPage 18
http://www.quark.com/products/xpress/beta/testers_60/60_alpha_knownissues.htmlhttp://www.quark.com/products/xpress/beta/testers_60/60_alpha_knownissues.htmlhttp://www.quark.com/products/xpress/beta/testers_60/60_alpha_knownissues.htmlhttp://www.quark.com/products/xpress/beta/testers_60/60_alpha_knownissues.html


19/20


Legal Notices

2003 Quark Technology Partnership as to the content and

arrangement of this material. All rights reserved.

19862003 Quark Technology Partnership and its licensors

as to the technology. All rights reserved.

Information in this document is subject to change without

notice and does not represent a commitment on the part of

Quark Technology Partnership or its licensee, Quark, Inc. In

the event of a conflict between agreements and these provi-

sions the relevant agreements shall control.

Unauthorized use or reproduction without Quarks writtenconsent is prohibited.

THIS COPY OF QUARKXPRESS 6.0 SOFTWARE CONTAINS

PRE-RELEASE VERSIONS, AND DOES NOT REPRESENT

COMMERCIALLY RELEASED PRODUCT OR MATERIALS,

AND MAY CONTAIN BUGS, ERRORS, AND OTHER PROB-

LEMS THAT COULD CAUSE, AMONG OTHERS, SYSTEM

FAILURES OR LOSS OF DATA. THE PRE-RELEASE SOFT-

WARE PACKAGE IS PROVIDED TO LICENSEE ON AN AS

IS BASIS. QUARK, THE QUARK AFFILIATED COMPANIES,

AND THEIR RESPECTIVE LICENSORS DISCLAIM ALL WAR-

RANTIES, WHETHER EXPRESS, IMPLIED, STATUTORY, OR

COLLATERAL, INCLUDING, WITHOUT LIMITATION, ALL

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, NON-INFRINGEMENT, COMPATI-

BILITY, OR THAT THE SOFTWARE IS ERROR-FREE, OR

THAT ERRORS CAN OR WILL BE CORRECTED, OR THAT

THE SOFTWARE WILL OPERATE WITHOUT ERROR WITH

OTHER SOFTWARE OR HARDWARE. SOME JURISDIC-

TIONS, STATES, OR PROVINCES DO NOT ALLOW LIMI-TATIONS ON IMPLIED WARRANTIES, SO THE ABOVE

LIMITATION MAY NOT APPLY TO LICENSEE.

IN ADDITION TO THE DISCLAIMER OF WARRANTIES

ABOVE, IT IS UNDERSTOOD FURTHER THAT THE PRE-

RELEASE SOFTWARE PACKAGE PROVIDED HEREUNDER

IS NOT A FULLY TESTED PRODUCT OFFERING AND HAS

NOT BEEN COMPLETED ACCORDING TO QUARKS

NORMAL DEVELOPMENT PROCEDURES. LICENSEESUSE OF THE PRE-RELEASE SOFTWARE PACKAGE IS AT

LICENSEES SOLE RISK.

ACCORDINGLY, THE PRE-RELEASE SOFTWARE SHOULD

NOT BE USED FOR ACTUAL PRODUCTION.

BY USING THIS SOFTWARE, YOU ARE AGREEING TO

ASSUME ALL RISKS RELATED TO ITS USE. IN NO EVENT

WILL QUARK, THE QUARK AFFILIATED COMPANIES, OR

THEIR LICENSORS BE LIABLE TO LICENSEE FOR ANYDAMAGES, INCLUDING ANY LOST PROFITS, LOST SAV-

INGS, LOST DATA, BUSINESS INTERRUPTION OR OTHER

SPECIAL, INDIRECT, INCIDENTAL, PUNITIVE, OR CONSE-

QUENTIAL DAMAGES WHATSOEVER, EVEN IF QUARK OR

ANY AGENT OR REPRESENTATIVE OF QUARK HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR

FOR ANY CLAIM BY ANOTHER PARTY. LICENSEE BEARS

TopicsPage 19


20/20


Legal Notices, continued

THE ENTIRE RISK AS TO THE QUALITY AND PERFOR-

MANCE OF THE PRE-RELEASE SOFTWARE PACKAGE. THE

PARTIES AGREE THAT THE LIABILITY OF QUARK, THE

QUARK AFFILIATED COMPANIES AND THEIR RESPEC-TIVE LICENSORS RELATING TO THE PRE-RELEASE SOFT-

WARE PACKAGE SHALL IN NO EVENT EXCEED THE

TOTAL AMOUNT QUARK RECEIVED FOR THE LICENSE

OF THE SPECIFIC PRE-RELEASE SOFTWARE PACKAGE

AT ISSUE, IF ANY, OR THE LOWEST AMOUNT UNDER

APPLICABLE LAW, WHICHEVER IS LESS. SOME JURIS-

DICTIONS, STATES, OR PROVINCES DO NOT ALLOW

THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO THE LIMITATION OR

EXCLUSION INCLUDED IN THIS AGREEMENT MAY NOT

APPLY. ALL OTHER LIMITATIONS PROVIDED UNDER

APPLICABLE LAW, INCLUDING

STATUTES OF LIMITATION, SHALL CONTINUE TO APPLY.

The QuarkXPress 6.0 pre-release applications are provided to

assist you in evaluating the features and newest functionality

of these powerful publishing tools.

Use of this pre-release software is subject to the terms of the

applicable pre-release license agreement and copyright and

other laws of the United States and international treaties.

Quark, QuarkXPress, QuarkXPress Passport, QuarkXTensions,

and XTensions are trademarks of Quark, Inc. and all applicable

affiliated companies, Reg. U.S. Pat. & Tm. Off., and in many

other countries. The Quark logo is a trademark of Quark, Inc.and all applicable affiliated companies.

Microsoft is a registered trademark of Microsoft Corporation in

the United States and/or other countries.

All other marks are the properties of their respective owners.

TopicsPage 20

6_0 beta readme

Documents