7023 ata abrasives cat aw:5217 abrasives cat aw groupuk ata abrasives is a renowned manufacturer...
TRANSCRIPT
Abrasives
www.ataabrasives.co.uk
Introduction
groupuk
ATA Abrasives is a renowned manufacturer & distributor of superiorquality speciality abrasives & mounted points.
The brand is part of the internationally recognised ATA Group, a privately owned company with over 50 years experience of supplyingmetal removal solutions to all major industry sectors.
We are committed to providing our customers with high performanceproducts that maximise their productivity, whilst helping to drivedown their costs.
Since its inception over 50 years ago ATA has been extremely awareof the potential risks facing operators operating hand held air tools.
Throughout its existence it has focussed on making sure that thedesign & manufacture of their tools keeps that risk as low as possible.
ATA brand expanded into the unique position of manufacturing theabrasive consumables used on air tools as well as the air tools themselves. This extra care was then extended into the combinationof tool & consumable used in our customers’ metal removal processes.
This practice continues today & in the new catalogue you will findthat we have highlighted products which offer the potential for
customers to experience LOWER LEVELS OF VIBRATION from their own processes.
This is supported by the FREE site surveys of our technical salesteam which are described on the inside back cover.
Our UK sales & distribution centre, based in Leicester, offers our customers a centre for excellence in customer service advising themon the most effective & safe use of our products.
Our head office & production centre is based in Cavan, Ireland & theATA Group are accredited to ISO9001:2008.
Tool shown RA20LR
Tool shown RA14-125PA4All tools shown are from the ATA range of pneumatic power tools - www.atagroupuk.com
Tool shown BL16L
3www.ataabrasives.co.uk
ATA Quick Change Discs 4 - 8
ATA Holders 9 - 10
ATA Flap Discs 11 - 12
ATA Grind Discs 13
ATA Cut Off Discs 14 - 15
ATA Belts 16 – 17
ATA Drum Sander Bands 18 - 19
ATA Bands 20
ATA Fan Grinders 21 - 22
ATA Brite Finishing Wheels 23
ATA Caps 24 - 25
ATA Rolls 26
ATA Mounted Points Shapes Table 27 - 28
ATA Points (Vitrified Bond) 29 - 32
ATA Points (Resinoid Bond) 33
ATA Flex Mounted Points 34 - 35
ATA Grinding Wheels 36 - 38
Recommendations For Use 39
Contents
D Locking Grit Size Max. Speed Disc
(mm) System 36 50 60 80 120 180 240 320 (rpm) Pack Qty
ATA Product Code
20 - AD20-50 AD20-60 AD20-80 AD20-120 AD20-180 AD20-240 AD20-320 37000 50
25 AD25-36 AD25-50 AD25-60 AD25-80 AD25-120 AD25-180 AD25-240 AD25-320 37000 50
38 AD38-36 AD38-50 AD38-60 AD38-80 AD38-120 AD38-180 AD38-240 AD38-320 25000 50
50 AD50-36 AD50-50 AD50-60 AD50-80 AD50-120 AD50-180 AD50-240 AD50-320 25000 50
75 AD75-36 AD75-50 AD75-60 AD75-80 AD75-120 AD75-180 AD75-240 AD75-320 20000 50
20 - - SD20-60 SD20-80 SD20-120 SD20-180 - - 37000 50
25 SD25-36 SD25-50 SD25-60 SD25-80 SD25-120 SD25-180 SD25-240 - 37000 50
38 SD38-36 SD38-50 SD38-60 SD38-80 SD38-120 SD38-180 SD38-240 - 25000 50
50 SD50-36 SD50-50 SD50-60 SD50-80 SD50-120 SD50-180 SD50-240 - 25000 50
75 SD75-36 SD75-50 SD75-60 SD75-80 SD75-120 SD75-180 SD75-240 - 20000 50
25 - RD25-50 RD25-60 RD25-80 RD25-120 RD25-180 - - 37000 50
38 RD38-36 RD38-50 RD38-60 RD38-80 RD38-120 RD38-180 - - 25000 50
50 RD50-36 RD50-50 RD50-60 RD50-80 RD50-120 RD50-180 RD50-240 - 25000 50
75 RD75-36 RD75-50 RD75-60 RD75-80 RD75-120 RD75-180 RD75-240 - 20000 30
These high quality abrasive discs are suitable for use on the ATA range of small right angle grinders.
Available in a variety of grit types & sizes they: • Offer easy & rapid disc changeover • Have accurate centering & attach securely to holders• Standard holders are fitted with 6mm shanks
Uses: Suitable for a wide range of applications & materials.
We offer a choice of disc locking systems:• Type "ATA" system• Type "S" system• Type "R" system• Type "Scrulok" system
For further detail of our holders range please see page 9. By using short reach holders for direct attachment to ATA tools you are providing a
ATA Quick Change Discs
ATADISC - Aluminium OxideThese versatile, all purpose, tear resistant grinding discs offer:• High stock removal • Good disc lifeUses: Suitable for general purpose grinding, blending & deburring of most ferrous & non ferrous metals.
Tool shown RA20LR
D Locking Grit Size Max. Speed Disc
(mm) System 36 50 60 80 120 (rpm) Pack Qty
ATA Product Code
20 - - ADC20-60 - - 37000 50
25 ADC25-36 ADC25-50 ADC25-60 - - 37000 50
38 ADC38-36 ADC38-50 ADC38-60 - - 25000 50
50 ADC50-36 ADC50-50 ADC50-60 ADC50-80 ADC50-120 25000 50
75 ADC75-36 ADC75-50 ADC75-60 ADC75-80 ADC75-120 25000 50
50 SDC50-3 SDC50-50 SDC50-60 SDC50-80 SDC50-120 25000 50
75 SDC75-36 SDC75-50 SDC75-60 SDC75-80 SDC75-120 20000 50
50 RDC50-36 RDC50-50 RDC50-60 RDC50-80 RDC50-120 25000 50
75 RDC75-36 RDC75-50 RDC75-60 RDC75-80 RDC75-120 20000 50
D Locking Grit Size Max. Speed Disc
(mm) System 36 50 60 80 (rpm) Pack Qty
ATA Product Code
25 ADZ25-36 ADZ25-50 ADZ25-60 - 37000 50
38 ADZ38-36 ADZ38-50 ADZ38-60 - 25000 50
50 ADZ50-36 ADZ50-50 ADZ50-60 ADZ50-80 25000 50
75 ADZ75-36 ADZ75-50 ADZ75-60 ADZ75-80 20000 50
50 SDZ50-36 SDZ50-50 SDZ50-60 SDZ50-80 25000 50
75 SDZ75-36 SDZ75-50 SDZ75-60 SDZ75-80 20000 50
50 RDZ50-36 RDZ50-50 RDZ50-60 RDZ50-80 25000 50
75 RDZ75-36 RDZ75-50 RDZ75-60 RDZ75-80 20000 50
5
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
ATADISC - Zirconia AluminaThis range of tough, tear resistant discs offer:• Rapid stock removal • Aggressive cut • Ideal for use where coarse grades are preferredUses: Suitable for general purpose grinding & blending on irons, alloy steels, stainless steel, titanium &other exotic metals.
ATA Quick Change Discs
ATADISC - CeramicThese high quality discs offer:• Supreme stock removal • Cool cutting • High durability • Highly aggressive cutUses: Suitable for general purpose grinding & blending on all steels, especially suited for stainless steel & high nickel alloys.
Tool shown RA20LR
D Locking Grit Size Max. Speed Disc
(mm) System 36 60 80 120 240 (rpm) Pack Qty
ATA Product Code
50 ADSC50-36 ADSC50-60 ADSC50-80 ADSC50-120 ADSC50-240 25000 50
75 ADSC75-36 ADSC75-60 ADSC75-80 ADSC75-120 ADSC75-240 20000 50
50 SDSC50-36 SDSC50-60 SDSC50-80 SDSC50-120 SDSC50-240 25000 50
75 SDSC75-36 SDSC75-60 SDSC75-80 SDSC75-120 SDSC75-240 20000 50
50 RDSC50-36 RDSC50-60 RDSC50-80 RDSC50-120 RDSC50-240 25000 50
75 RDSC75-36 RDSC75-60 RDSC75-80 RDSC75-120 RDSC75-240 20000 50
D Locking Grit Size Max. Speed Disc
(mm) System 24 36 50 80 (rpm) Pack Qty
ATA Product Code
50 SCRULOK SLD50-24 SLD50-36 SLD50-50 SLD50-80 25000 50
75 SCRULOK SLD75-24 SLD75-36 SLD75-50 SLD75-80 20000 50
SCRULOK Resin Fibre Discs - Zirconia AluminaThese durable resin fibre discs offer:• Excellent stock removal • An aggressive cut • Secure SCRULOK threaded connectionUses: Suitable for general purpose grinding, blending & deburring on most metals including stainless steel, inconel, cast iron & steel.
ATADISC - Silicon CarbideThis range of quality grinding & blending discs offer: • A cool & rapid cutting actionUses: Suitable for general purpose grinding & blending on alloy steels, titanium, non-ferrous metals, fibreglass, marble & wood. These discs are also ideal for the removal of flashings on rubber & plastics.
ATA Quick Change Discs
D Locking Grit Size Max. Speed Disc
(mm) System Coarse Medium Fine (rpm) Pack Qty
ATA Product Code
25 ABRS25C ABRS25M ABRS25F 37000 20
38 ABRS38C ABRS38M ABRS38F 25000 20
50 ABRS50C ABRS50M ABRS50F 20000 20
75 ABRS75C ABRS75M ABRS75F 17000 20
50 SDS50C SDS50M SDS50F 20000 20
75 SDS75C SDS75M SDS75F 17000 20
50 RDS50C RDS50M RDS50F 20000 20
75 RDS75C RDS75M RDS75F 17000 20
D Locking Grit Size Max. Speed Disc
(mm) System Coarse Medium Fine (rpm) Pack Qty
ATA Product Code
25 ABRF25C ABRF25M ABRF25F 37000 20
38 ABRF38C ABRF38M ABRF38F 25000 20
50 ABRF50C ABRF50M ABRF50F 20000 20
75 ABRF75C ABRF75M ABRF75F 17000 20
50 SDF50C SDF50M SDF50F 20000 20
75 SDF75C SDF75M SDF75F 17000 20
50 RDF50C RDF50M RDF50F 20000 20
75 RDF75C RDF75M RDF75F 17000 20
7
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
ATADISC - Atabrite Surface ConditioningThese flexible, non-woven synthetic fibre mesh discs are impregnated with abrasive grit offering:• Controlled & consistent cuttingUses: Suitable for ultra fine surface dressing of most materials, removal of rust, flashing & minor surface flaws.
ATADISC - Atabrite Clean & FinishA range of flexible, open construction, non-woven nylon fibre discs which are embedded with abrasive grit offering:• Controlled & consistent cuttingUses: Suitable for ultra fine finishing & the cosmetic surface preparation of most materials, including metals, plastics, ceramic & wood.
ATA Quick Change Discs
Tool shown RA20LR
D Locking Grit Size Max. Speed Disc
(mm) System 36 54 80 120 (rpm) Pack Qty
ATA Product Code
25 CFD25-36 CFD25-54 CFD25-80 CFD25-125 37000 20
38 CFD38-36 CFD38-54 CFD38-80 CFD38-125 25000 20
50 CFD50-36 CFD50-54 CFD50-80 CFD50-125 20000 20
75 CFD75-36 CFD75-54 CFD75-80 CFD75-125 17000 20
50 SCFD50-36 SCFD50-54 SCFD50-80 SCFD50-125 20000 20
75 SCFD75-36 SCFD75-54 SCFD75-80 SCFD75-125 17000 20
50 RCFD50-36 RCFD50-54 RCFD50-80 RCFD50-125 20000 20
75 RCFD75-36 RCFD75-54 RCFD75-80 RCFD75-125 17000 20
ATADISC - Ataflex Long Life Cotton FibreThese flexible bonded aluminium oxide abrasive discs offer:• Grinding & finishing in one step • Smooth grinding action • Long life • Medium (rigid) bond available upon request.Uses: suitable for general purpose grinding, blending & finishing on most metals & composites. They are particularly good on stainless steel, titanium & aluminium.
Do not exceed the Maximum Operating Speed of the disc or of the disc holder.
Holders sold separately. Please refer to page 10 for more details.
For optimum combination of ATADISC quick change disc & ATA air tool for your application, please consult ATA Group UK.
Other ATADISC sizes & grades available subject to special order conditions please contact our customer service team.
For optimum effect it is recommended that where possible holders are one size smaller than the discsbeing used. Medium (rigid) bond available upon request.
ATA Quick Change Discs
All tools shown are from the ATA range of pneumatic power tools.view our range at www.atagroupuk.com
9
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
ATA Holders
The ATA range of holders as been developed to ensure the best attachment of product to our tools. The holders work best with our own range of tools &abrasives.
HOLDERS for ATADISC & SCRULOK Quick Change Discs
Select from a choice of disc locking systems :‘ATA’ Disc 3 & 4 point interlocking bayonet system.Type ‘S’ system (female threaded connector) Type ‘R’ system (male threaded connector) Type ‘Scrulok’ metal threaded system (Scrulok Discs only).Please refer to pages 4 - 8 for product & holder matching.
To suit ATA Holder - Product Code
Disc
Diameter Disc Locking System
(mm) ATA S R SCRULOK
20 ADH20 SDH20 RDH20 -
25 ADH25 SDH25 RDH25 -
38 ADH38 SDH38 RDH38 -
50 ADH50 SDH50 RDH50 ADH50
75 ADH75 SDH75 RDH75 ADH75
For ATA Holder - Product Code
Disc
Diameter Disc Locking System
(mm) ATA S R
20 Parts Sold separately N/A N/A
25 Parts Sold separately N/A N/A
38 Parts Sold separately N/A N/A
50 42001020 42004820 42005020
75 42001120 42004620 42005120
STANDARD HOLDER
SHORT REACH DIRECT ATTACHMENT HOLDER
HOLDERS for ATA Drum Sander Bands
Spindle mounted reusable slotted rubberdrums which expand under centrifugal speedsto provide grip. Please refer to pages 18-19for product & holder matching.
HOLDERS for ATA Bands
Spindle mounted reusable rubber holders which expandunder centrifugal speeds to provide grip. Please refer topage 20 for product & holder matching.
HOLDERS for ATA Rolls
Spindle mounted reusable conical mandrels.Please refer to page 26 for product & holdermatching.
ATA Holders
11
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
D Bore size Grit Size Max. Speed Disc
(mm) (mm) 40 60 (rpm) Pack Qty
ATA Product Code
115 22.23 AFX115-Z40 AFX115-Z60 13280 10
125 22.23 AFX125-Z40 AFX125-Z60 12250 10
180 22.23 AFX180-Z40 AFX180-Z60 8600 10
ATA Flap Discs
D Bore size Grit Size Max. Speed Disc
(mm) (mm) 40 60 80 (rpm) Pack Qty
ATA Product Code
100 22.23 AFS100-Z40 AFS100-Z60 AFS100-Z80F 15300 10
115 22.23 AFS115-Z40 AFS115-Z60 AFS115-Z80F 13280 10
125 22.23 AFS125-Z40 AFS125-Z60 AFS125-Z80F 12250 10
180 22.23 AFS180-Z40 AFS180-Z60 AFS180-Z80F 8600 10
ATA FLAP Supreme - ZirconiumThese abrasive flap discs are for use on ATA right angle grinders. They offer:• Long life disc • High stock removal • Free cuttingUses: Suitable for use on most metals, excellent for stainless steel.
ATA FLAP Extra - Zirconium• Coarse grained heavy duty disc offering extra life • Excellent stock removal in aggressive applicationsUses: Suitable for use on most metals, excellent for stainless steel.
These abrasive flap discs are for use on the ATA range of right angle grinders. They offer:• Low noise, LOW VIBRATION & ease of use in comparison to grinding discs• Extreme long life in comparison to sanding discsUses: Suitable for grinding & deburring application.
Tool shown RA14-125PA4
D Bore size Grit Size Max. Speed Disc
(mm) (mm) 40 60 (rpm) Pack Qty
ATA Product Code
115 22.23 AFS115-C40 AFS115-C60 13280 10
125 22.23 AFS125-C40 AFS125-C60 12250 10
ATA FLAP Supreme - Ceramic• Extreme long life disc • Very high stock removal. • Free & cool cutting in aggressive applicationsUses: Ideal for use on tough, ferrous alloys, excellent on stainless & exotic steels.
ATA FLAP Supreme Aluminium Oxide Discs & ATA FLAP Flat Discs are available subject to special order conditions, please contact our customer service team.
ATA Flap Discs
For more information on the ATA range of pneumatic power tools,Please call our customer service team on 0844 967 0702 or visitwww.atagroupuk.com
13
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
D T Bore size ATA Product Code Max. Speed Disc
(mm) (mm) (mm) (rpm) Pack Qty
100 4 16 AGD100-4AI 15300 10
100 6 16 AGD100-6AI 15300 10
115 4 22.23 AGD115-4AI 13300 10
115 7 22.23 AGD115-6AI 13300 10
125 4 22.23 AGD125-4AI 12200 10
125 7 22.23 AGD125-6AI 12200 10
178 4 22.23 AGD178-4AI 8600 10
178 7 22.23 AGD178-6AI 8600 10
230 7 22.23 AGD230-6AI 6600 10
ATA Grind Discs
TYPE 27 - Reinforced Depressed Centre Grinding Wheels.• Coarse aluminium oxide INOX grade discs for use on ATA right angle grinders • Rapid stock removalUses: Suitable for weld dressing, edge grinding & surface finishing applications on most metals, including stainless steel.
D T Bore size ATA Product Code Max. Speed Disc
(mm) (mm) (mm) (rpm) Pack Qty
30 6 6.0 AGD030-6AI 51000 10
40 6 6.0 AGD040-6AI 38200 10
50 6 6.0 AGD050-6AI 30600 10
70 6 10.0 AGD070-6AI 21800 10
RING WHEELS - Flat reinforced grinding wheels• Small diameter coarse aluminium oxide INOX grade discs generally used on ATA straight grinders • Rapid stock removal • Ideal for use where access is limited Uses: Suitable for general grinding operations on ferrous materials.
Arbors are available upon request. Arbor shank sizes - 6mm for Ø30, Ø40 & Ø50 wheels. Ø8mm for Ø70 wheels.Other sizes & grades of grinding discs & wheels are available subject to special order conditions, please contact our customer service team.
Tool shown RA14-125PA4
Tool shown SV27LR
D T Bore size ATA Product Code Max. Speed Disc(mm) (mm) (mm) (rpm) Pack Qty
100 2.5 16.00 ACD100-2AI 15300 25
115 2.5 22.23 ACD115-2AI 13300 25
125 2.5 22.23 ACD125-2AI 12250 25
178 2.5 22.23 ACD178-2AI 8500 25
230 2.5 22.23 ACD230-2AI 6650 25
ATA Cut Off Discs
TYPE 42 - Reinforced Depressed Centre Cutting off Wheels • For use on ATA right angle grinders • Fast cutting aluminium oxide INOX gradeUses: Suitable for cutting sheet metal, plate, sections & solid materials.
D T Bore size ATA Product Code Max. Speed Disc
(mm) (mm) (mm) (rpm) Pack Qty
100 1.0 16.00 ACDF100-1AI 15300 25
115 1.0 22.23 ACDF115-1AI 13300 25
115 1.6 22.23 ACDF115-1.6AI 13300 25
125 1 22.23 ACDF125-1AI 12250 25
125 1.6 22.23 ACDF125-1.6AI 12250 25
178 1.6 22.23 ACDF178-1.6AI 8500 25
230 1.9 22.23 ACDF230-1.9AI 6650 25
TYPE 41 - Reinforced Flat Cutting off Wheels • For use on ATA right angle grinders • Fast cutting aluminium oxide INOX gradeUses: Suitable for cutting sheet metal, plate & sections.
Tool shown RA14-125PA4
15
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
Other sizes and grades of cutting off discs available subject to special order conditions, please contact our customer service team.
D T Bore size ATA Product Code Max. Speed Disc
(mm) (mm) (mm) (rpm) Pack Qty
30 1.1 6 ACDF030-1AI 51000 10
40 1.1 6 ACDF040-1AI 38200 10
50 1.4 6 ACDF050-1AI 30600 10
70 1.4 10 ACDF070-1AI 21800 10
Ø6mm shank arbors available upon request.
RING WHEELS - Flat reinforced cutting-off wheels • For use on ATA straight grinders • Ideal for use where access is limited • Fast cutting aluminium oxide gradeUses: These small diameter wheels are ideal for cutting, notching & slotting on a variety of ferrous & non ferrous materials.
ATA Cut Off Discs
For more information on the ATA range of pneumatic power tools,Please call our customer service team on 0844 967 0702 or visitwww.atagroupuk.com
ATA Belts
File linishing & surface finishing belts for hand held belt sanders.
Width Length ATA Belt Type Grits Available Pack
(mm) (mm) 36 40 60 80 100 120 180 240 320 Qty
6 480 RALB06-… • • • • • • • • • 10
10 480 RALB10-… • • • • • • • • • 10
16 480 RALB16-… • • • • • • • • • 10
20 480 RALB20-… • • • • • • • • • 10
25 480 RALB25-… • • • • • • • • • 10
RALB (STD Range for ATA Belt Linisher BL16L)
To order specify belt type, width & gritExample: Belt type Width - Grit Size
RALB 06 - 60Aluminium Oxide
Width Length ATA Belt Type Grits Available Pack
(mm) (mm) 36 40 60 80 100 120 180 240 320 Qty
6 480 RALBZ06-… • • • • • • 10
10 480 RALBZ10-… • • • • • • 10
16 480 RALBZ16-… • • • • • • 10
20 480 RALBZ20-… • • • • • • 10
25 480 RALBZ25-… • • • • • • 10
Zirconium
Width Length ATA Belt Type Grits Available Pack
(mm) (mm) 36 40 60 80 100 120 180 240 320 Qty
16 480 RALBC16-… • • • • • • 10
20 480 RALBC20-… • • • • • • 10
25 480 RALBC25-… • • • • • • 10
Ceramic
Width Length ATA Belt Type Grits Available Pack
(mm) (mm) Fine Medium Coarse Qty
16 480 RALBS16-… • • • 10
20 480 RALBS20-… • • • 10
25 480 RALBS25-… • • • 10
Surface Conditioning
RALBL (Extended Arm Range for ATA Belt Linisher BL16L)
Aluminium Oxide
Width Length ATA Belt Type Grits Available Pack
(mm) (mm) 36 40 60 80 100 120 180 240 320 Qty
16 480 RALBL16-… • • • • • • • • • 10
20 480 RALBL20-… • • • • • • • • • 10
Tool shown BL16L
17
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
Width Length ATA Belt Type Grits Available Pack
(mm) (mm) 36 40 60 80 100 120 180 240 320 Qty
13 305 BLFB13x305-AO… • • • • • • • • • 23
13 457 BLFB13x457-AO-… • • • • • • • • • 23
13 610 BLFB13x610-AO-… • • • • • • • • • 23
20 520 BLFB20x520-AO… • • • • • • • • • 15
File Belts for other make belt linishers incl. ATA's RALB20L, RALB10L & other BL16L variations
To order specify belt type, width & gritExample: Belt type Width Length - Mineral Grit
BLFB 13 x 60 - AO 60Aluminium Oxide
ATA BeltsAO = Aluminium oxideZA = ZirconiumCA = Ceramic
Width Length ATA Belt Type Grits Available Pack
(mm) (mm) 36 40 60 80 100 120 180 240 320 Qty
13 305 BLFB13x305-ZA… • • • • • • 23
13 457 BLFB13x457-ZA-… • • • • • • 23
13 610 BLFB13x610-ZA-… • • • • • • 23
20 520 BLFB20x520-ZA… • • • • • • 15
Zirconium
Width Length ATA Belt Type Grits Available Pack
(mm) (mm) 36 40 60 80 100 120 180 240 320 Qty
13 305 BLFB13x305-CA… • • • • • • 23
13 457 BLFB13x457-CA-… • • • • • • 23
13 610 BLFB13x610-CA-… • • • • • • 23
20 520 BLFB20x520-CA… • • • • • • 15
Ceramic
Narrow Linishing BeltsTo order specify belt type, width & grit
Example: Belt type Width Length - Mineral GritBLFB 13 x 60 - AO 60
Aluminium Oxide
Width Length ATA Belt Type ATA Product Code by Grit Pack
(mm) (mm) 36 40 60 80 100 120 180 240 320 Qty
25 1065 BLNB25x1065-AO… • • • • • • • • • 23
50 760 BLNB50X760-AO… • • • • • • • • • 23
100 915 BLNB100X915-AO… • • • • • • • • • 23
Width Length ATA Belt Type ATA Product Code by Grit Pack
(mm) (mm) 36 40 60 80 100 120 180 240 320 Qty
25 1065 BLNB25x1065-ZA… • • • • • • 23
50 760 BLNB50X760-ZA… • • • • • • 23
100 915 BLNB100x915-ZA… • • • • • • 23
Width Length ATA Belt Type ATA Product Code by Grit Pack
(mm) (mm) 36 40 60 80 100 120 180 240 320 Qty
25 1065 BLNB25x1065-CA… • • • • • • 23
50 760 BLNB50x760-CA… • • • • • • 23
100 915 BLNB100x915-CA… • • • • • • 23
*Grit size availability dependent on belt size.Other sizes and grades available subject to special order conditions, please contact our customer service team.
D T ATA DS BAND Holder Holder Shank Max. Speed Recommended Pack Qty
(mm) (mm) Product Code Product Code (mm) (rpm) Min Speed (rpm) (Bands)
75 30 SB7530 GK7530 8 7600 5000 10
100 40 SB10040 GK10040 8 5700 4000 10
D T ATA DS BAND Holder Holder Shank Max. Speed Recommended Pack Qty
(mm) (mm) Product Code Product Code (mm) (rpm) Min Speed (rpm) (Bands)
20/14 63 SB201463 GK201463 6 22000 15000 10
29/22 30 SB292230 GK292230 6 19100 13000 10
36/22 60 SB362260 GK362260 6 15900 10000 10
ATA Drum Sander Bands
Aluminium oxide or Zirconium coated, spiral wound abrasive bands.• The bands holders consist of spindle mounted, slotted rubber drums. The drums expand under centrifugal forces at operating speeds
to provide grip.Uses: Suitable for general surface finishing & deburring applications, especially where access is limited.
ALUMINIUM OXIDEUses: Suitable for use on a wide range of materials from steels to plastics. Particularly effective on non ferrous metals & alloy steels.
Grit sizes : 40, 60, 80, 150 (40 grit available for Ø25 bands & above only as standard)
D T ATA DS BAND Holder Holder Shank Max. Speed Recommended Pack Qty
(mm) (mm) Product Code Product Code (mm) (rpm) Min Speed (rpm) (Bands)
10 20 SB1020 GK1020 6 36000 30000 10
13 25 SB1325 GK1325 6 36000 30000 10
15 10 SB1510 GK1510 6 36000 25000 10
15 30 SB1530 GK1530 6 36000 25000 10
22 20 SB2220 GK2220 6 26000 17000 10
25 25 SB2525 GK2525 6 24000 15000 10
30 20 SB3020 GK3020 6 19100 13000 10
38 25 SB3825 GK3825 6 15000 10000 10
30 30 SB3030 GK3030 6 19100 13000 10
45 30 SB4530 GK4530 6 12700 8500 10
51 25 SB5125 GK5125 6 11200 7500 10
60 30 SB6030 GK6030 6 9500 6500 10
Large cylindrical bands
Tapered bands
Standard cylindrical bands Tool shown SD37LR
19
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
D T ATA DS BAND Holder Holder Shank Max. Speed Recommended Pack Qty
(mm) (mm) Product Code Product Code (mm) (rpm) Min Speed (rpm) (Bands)
36/22 60 SB362260Z GK362260 6 15900 10000 10
D T ATA DS BAND Holder Holder Shank Max. Speed Recommended Pack Qty
(mm) (mm) Product Code Product Code (mm) (rpm) Min Speed (rpm) (Bands)
75 30 SB7530Z GK7530 8 7600 5000 10
ATA Drum Sander Bands
ZIRCONIUM• Zirconium coated abrasive bands have low flexibility • Fast cutting with high stock removal ratesUses: Particularly effective on cast irons, harder high alloy steels & exotic materials.
Grit sizes : 36, 40, 50, 80 (36 & 40 grit available for Ø25 and above only as standard)
D T ATA DS BAND Holder Holder Shank Max. Speed Recommended Pack Qty
(mm) (mm) Product Code Product Code (mm) (rpm) Min Speed (rpm) (Bands)
10 20 SB1020Z GK1020 6 38000 30000 10
13 25 SB1325Z GK1325 6 36000 30000 10
25 25 SB2525Z GK2525 6 22900 15000 10
30 30 SB3030Z GK3030 6 19100 13000 10
38 25 SB3825Z GK3825 6 15000 10000 10
45 30 SB4530Z GK4530 6 12700 8500 10
51 25 SB5125Z GK5125 6 11200 7500 10
60 30 SB6030Z GK6030 6 9500 6500 10
Large cylindrical bands
Tapered bands
Standard cylindrical bands
*Maximum operating speed at maximum 13mm overhang. (Min insertion 10mm)
For ordering purposes please specify ATA DS BAND part code & grit size.Holders (spindle mounted drums) sold separately. Please refer to page 10. Other sizes & grits available subject to special order conditions, please enquire.
D T ATA Product Code Holder Holder Shank Max. Speed Disc
(mm) (mm) (band only) Product Code (mm) (rpm) Pack Qty
15 12 AB1512 AH1512 6 25000 100
15 25 AB1525 AH1525 6 25000 100
20 25 AB2025 AH2025 6 25000 100
25 25 AB2525 AH2525 6 18000 100
25 38 AB2538 AH2538 6 18000 100
30 30 AB3030 AH3030 6 16000 100
38 25 AB3825 AH3825 6 12000 100
50 25 AB5025 AH5025 6 10000 100
ATA Bands
ATA Bands are aluminium oxide or ceramic coated, lap jointed abrasive bands.• The band holders consist of spindle mounted, positive fit expandable drums. This enables the use of higher
grinding forces &/or slower speeds than standard drum sandersUses: Suitable for general surface finishing & deburring applications, especially where access is limited.
ALUMINIUM OXIDEUses: Suitable for use on a wide range of materials from steels to plastics. Particularly effective on non ferrous metals & alloy steels.
Grit sizes : 36, 50, 80, 120, 150 (36 grit available for Ø25 bands and above only as standard)
D T ATA Product Code Holder Holder Shank Max. Speed Disc
(mm) (mm) (band only) Product Code (mm) (rpm) Pack Qty
25 25 ABC2525 AH2525 6 18000 100
25 38 ABC2538 AH2538 6 18000 100
30 30 ABC3030 AH3030 6 16000 100
38 25 ABC3825 AH3825 6 12000 100
50 25 ABC5025 AH5025 6 10000 100
CERAMIC• Ceramic coated abrasive bands have low flexibility • They are fast & cool cutting with excellent stock removal.Uses: Particularly effective on cast irons & harder, high alloy steels.
Grit sizes : 36, 60, 120
*Maximum operating speed at maximum 13mm overhang. (Min insertion 10mm)For ordering purposes please specify ATA Product Code & grit size.
Holders (spindle mounted drums) sold separately. Please refer to page 10. Other sizes & grits available subject to special order conditions please contact our customer service team.
Tool shown S5L
21
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
ATA Fan Grinders
D T Shank Size ATA Product Code Max. Speed* Pack Qty
(mm) (mm) (mm) (rpm)
10 10 3 FG1010 38200 10
15 15 3 FG1515 38200 10
20 10 3 FG2010/3 38200 10
20 20 3 FG2020 38200 10
30 5 3 FG3005 25000 10
These fan type grinders consist of aluminium oxide coated abrasive flaps arranged radially about the axis of grinder & shank.• Highly flexible flaps, ideal for contoured surfaces. • For use on a wide variety of metals, plastic & wood.• Characterisics are cool, efficient cutting & ease of use. Uses: Suitable for general deburring, surface preparation, blending & finishing applications.
Miniature Rotary Fan GrindersGrit sizes: 80 & 120
A LOW NOISE, LOW VIBRATION product when matched with the correct ATA power tool.
Tool shown SD26L-ES from the ATA range of pneumatic power tools.
D T Shank Size ATA Product Code Max. Speed Disc
(mm) (mm) (mm) (rpm) Pack Qty
30 5 6 FG3005/6 25000 10
20 10 6 FG2010 38200 10
25 15 6 FG2515 38200 10
25 20 6 FG2520 38200 10
25 25 6 FG2525 38200 10
30 10 6 FG3010/6 25000 10
30 15 6 FG3015 25000 10
40 10 6 FG4010 19100 10
40 15 6 FG4015 19100 10
40 20 6 FG4020 19100 10
40 30 6 FG4030 19100 10
50 10 6 FG5010 15200 10
50 15 6 FG5015 15200 10
50 20 6 FG5020 15200 10
50 30 6 FG5030 15200 10
50 40 6 FG5040 15200 10
60 15 6 FG6015 12700 10
60 20 6 FG6020 12700 10
60 30 6 FG6030 12700 10
60 40 6 FG6040 12700 10
60 50 6 FG6050 12700 10
80 15 6 FG8015 8900 10
80 30 6 FG8030 8900 10
80 40 6 FG8040 8900 10
80 50 6 FG8050 8900 10
Standard Rotary Fan GrindersGrit sizes: 40, 60, 80, 120, 150, 180, 240 (40 grit available for Ø40 and above only. 240 grit available for Ø50 and below only as standard)
*Maximum operating speed at maximum 13mm overhang. (Min insertion 10mm)For ordering please specify part number and grit size.
Other sizes & grits available subject to special order conditions, please contact our customer service team.
ATA Fan Grinders
23
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
For ordering please specify part number, grit type & grit size.
*Maximum operating speed at maximum 13mm overhang. (Min insertion 10mm)Other sizes & grades available subject to special order conditions, please contact our customer service team.
D T Shank size ATA Product Code Max. Speed Pack Qty
(mm) (mm) (mm) (rpm)
40 20 6 ABW4020NYLON 14000 1
50 25 6 ABW5025NYLON 12000 1
60 30 6 ABW6030NYLON 9000 1
75 45 6 ABW7545NYLON 8000 1
100 45 6 ABW10045NYLON 6500 1
ATA Brite Finishing Wheels
Radially mounted, non woven nylon pads imbedded with abrasive grit. • Highly flexible wheels • Extreme ease of use • Ideal for contoured surfacesUses: Suitable for a variety of fine & ultra-fine finishing applications.
A LOW NOISE, LOW VIBRATION product when matched with the correct ATA power tool.
Grit Embedded Nylon ( Non interleaved)Uses: Select non interleaved wheels for ulta-fine finishing.Grade : Aluminium Oxide, Very Fine
Grit Embedded Nylon Interleaved with Coated Abrasive ClothUses: Select interleaved wheels for fine finishing or light stock removal.Grit sizes : Aluminium Oxide, A60, A100, A150, SiC, C150, C240(A60 grit available for Ø50 & above only as standard)
Order by ATA product code.
D T Shank size ATA Product Code Max. Speed Pack Qty
(mm) (mm) (mm) (rpm)
40 20 6 ABW4020 14000 1
50 25 6 ABW5025 12000 1
60 30 6 ABW6030 9000 1
75 45 6 ABW7545 8000 1
100 45 6 ABW10045 6500 1
Tool shown S5L
ATA Caps
Aluminium oxide coated, seamless abrasive caps & cones for fitting to spindle mounted re-useable rubber holders. The tight fitting, slotted rubber holder expands due to centrifugal force to firmly grip the abrasive cap or cone. Uses: Used mainly for finishing work, typically on toolroom applications. Especially useful in difficult to reach areas where control is difficult.
Standard holders, sold separately, are fitted with 3mm or 6mm shanks. Please refer to the section on holders for details.
Grit sizes - Ø5 Caps - 80, 150, 280, All other cap sizes - 60, 150, 280
D T ATA DS BAND Holder Holder Max. Speed ATACA Holder
(mm) (mm) Product Code Product Code Shank Size (rpm) Pack Qty Pack Qty
5 10 PC05A PCT0510A 3 40000 50 1
7 12 PC07A PCT0712A 3 30000 50 1
10 15 PC10A PCT1015A 3 20000 50 1
13 17 PC13A PCT1317A 6 16000 50 1
16 26 PC16A PCT1626A 6 12000 50 1
D T ATA DS BAND Holder Holder Max. Speed ATACAP Holder
(mm) (mm) Product Code Product Code Shank Size (rpm) Pack Qty Pack Qty
5 11 PC05C PCT0511C 3 40000 50 1
7 13 PC07C PCT0713C 3 30000 50 1
10 15 PC10C PCT1015C 3 20000 50 1
13 17 PC13C PCT1317C 6 16000 50 1
16 26 PC16C PCT1626C 6 12000 50 1
Aluminium OxideA SHAPE
Aluminium OxideC SHAPE
Tool shown S10LR
25
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
D T ATA DS BAND Holder Holder Max. Speed ATACAP Holder
(mm) (mm) Product Code Product Code Shank Size (rpm) Pack Qty Pack Qty
5 11 PC05G PCT0511G 3 40000 50 1
7 11 PC07G PCT0711G 3 30000 50 1
10 15 PC10G PCT1015G 3 20000 50 1
13 17 PC13G PCT1317G 6 16000 50 1
16 26 PC16G PCT1626G 6 12000 50 1
Aluminium OxideG SHAPE
D T ATA DS BAND Holder Holder Max. Speed ATACAP Holder
(mm) (mm) Product Code Product Code Shank Size (rpm) Pack Qty Pack Qty
5 15 PC05L PCT0515L 6 40000 50 1
11 25 PC11L PCT1125L 6 20000 50 1
16 32 PC16L PCT1632L 6 12000 50 1
21 40 PC21L PCT2140L 6 10000 50 1
Aluminium OxideL SHAPE
For ordering please specify part number & grit size.Other sizes and grades available subject to special order conditions, please contact our customer service team.
Aluminium oxide coated, seamless abrasive caps & cones for fitting to spindle mounted re-useable rubber holders. The tight fitting, slotted rubber holder expands due to centrifugal force to firmly grip the abrasive cap or cone. Uses: Used mainly for finishing work, typically on toolroom applications. Especially useful in difficult to reach areas where control is difficult.
Standard holders, sold separately, are fitted with 3mm or 6mm shanks. Please refer to the section on holders for details.
Grit sizes - Ø5 Caps - 80,150, 280 All other cap sizes - 60, 150, 280
ATA Caps
ATA Rolls
Spiral wound aluminium oxide coated abrasive cloth rolls for secure fitting to grooved conical mandrels. ATAROLLS are available in cylindrical & taper forms Uses: for general deburring, blending and polishing of metals and non metallic materials.
Standard mandrels, sold separately, are fitted with 3mm or 6mm shanks. Please refer to page 10 for details.
D T ATAROLL Mandrel Mandrel Max. Speed Roll Mandrel
(mm) (mm) Product Code Product Code Shank Size (rpm) Pack Qty Pack Qty
3 25 C1 M1 3 37000 10 1
5 25 C2 M1 3 37000 10 1
6 25 C4 M3 6 37000 10 1
10 25 C5 M3 6 25000 10 1
10 38 C6 M5 6 25000 10 1
13 25 C7 M3 6 17000 10 1
13 38 C8 M5 6 17000 10 1
20 25 C9 M6 6 12000 10 1
20 38 C10 M7 6 12000 10 1
25 38 C11 M7 6 10000 10 1
Aluminium OxideC TYPE - CYLINDRICAL Grit sizes : 60, 80, 120(Ø3mm & Ø5mm rolls only available in 120 grit as standard)
D T ATAROLL Mandrel Mandrel Max. Speed Roll Mandrel
(mm) (mm) Product Code Product Code Shank Size (rpm) Pack Qty Pack Qty
10 25 S1 M3 6 25000 10 1
13 25 S2 M3 6 17000 10 1
13 38 S3 M5 6 17000 10 1
20 25 S4 M6 6 12000 10 1
20 38 S5 M7 6 12000 10 1
25 38 S6 M7 6 10000 10 1
Aluminium OxideS TYPE - TAPER Grit sizes : 60, 120
For ordering please specify part number & grit size. Other sizes & grades available subject to special order conditions, please contact our customer service team.
Tool shown SD26L-ES
27
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
ATA Mounted Points
ATA Abrasives offer three types of mounted points: • ATAPOINTS (Vitrified Bond) - in standard Pink AN grade • ATAPOINTS (Resinoid Bond) - in standard brown AB grade • ATAFLEX COTTON Further details of each of these ranges are shown on the following pages.
We offer these points in a variety of standard shapes, which are listedbelow. Please be aware that the shapes are shown in standard Pink forclarity & the colour point you receive will be dependant on which range youbuy from.
SHAPE A1 A2 A3 A3 MINI A4 A5 A11 A12 A13 A14
D (mm) 22 25 25 16 32 20 22 20 32 20
T (mm) 63 32 70 45 32 28 50 32 32 22
SHAPE A15 A21 A23 A24 A25 A26 A34 A35 A36 A37
D (mm) 6.5 25 20 6.5 Ø25 Ø16 38 25 38 32
T (mm) 27 25 25 20 Ø25 Ø16 10 13 10 6
SHAPE A38 A39 B41 B42 B44 B46 B52 B53 B54 B55
D (mm) 25 20 16 13 6 3 10 8 6 3
T (mm) 25 20 16 20 10 8 20 20 13 6
SHAPE B71 B73 B81 B91 B92 B96 B97 B98 B101 B103
D (mm) 15 13 20 13 6 3 3 2.5 16 16
T (mm) 3 3 5 16 6 6 10 6 18 6
SHAPE B104 B111 B121 B122 B123 B124 B125 B131 B132 B135
D (mm) 8 11 Ø13 Ø10 Ø5 Ø3 Ø6.3 13 10 6
T (mm) 10 17 Ø13 Ø10 Ø5 Ø3 Ø6.3 13 13 13
ATA Mounted Points
SHAPE W142 W144 W145 W146 W152 W153 W154 W160 W162 W163
D (mm) 2.5 3 3 3 5 5 5 6 6 3
T (mm) 6 6 10 13 6 10 13 6 10 13
SHAPE W164 W170 W175 W176 W177 W178 W179 W182 W185 W186
D (mm) 6 8 10 10 10 10 10 13 13 13
T (mm) 20 13 10 13 20 25 32 3 13 20
SHAPE W187 W188 W196 W197 W200 W201 W204 W205 W208 W215
D (mm) 13 13 16 16 20 20 20 20 20 25
T (mm) 25 38 25 50 3 8 20 25 50 3
SHAPE W216 W218 W220 W222 W225 W226 W227 W228 W230 W232
D (mm) 25 25 25 25 32 32 32 32 32 32
T (mm) 8 12 25 50 6 12 13 20 32 50
SHAPE W236 W237 W238 W242
D (mm) 15 13 20 13
T (mm) 3 3 5 16
29
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
ATA Points (Vitrified Bond)
These mounted points & wheels are a high purity aluminium oxide abrasive grit embedded in a vitrified bond & spindle mounted.Uses: The standard pink AN grade is suitable for surface finishing, deburring &general grinding applications. Ideal for use on steels & cast irons.
Shape Ref. D T Max Speed* ATA Pack Qty
(mm) (mm) (rpm) Product Code
A1 22 63 19800 A1-AN6 10
A2 25 32 38000 A2-AN6 10
A3 25 70 16100 A3-AN6 10
A3 MINI 16 45 17000 AS3-AN6 10
A4 32 32 29800 A4-AN6 10
A5 20 28 45000 A5-AN6 10
A11 22 50 19800 A11-AN6 10
A12 20 32 48000 A12-AN6 10
A13 32 32 33900 A13-AN6 10
A14 20 22 53000 A14-AN6 10
A15 6.5 27 72700 A15-AN6 10
A21 25 25 34500 A21-AN6 10
A23 20 25 39300 A23-AN6 10
A24 6.5 20 76500 A24-AN6 10
A25 Ø25 Ø25 35600 A25-AN6 10
A26 Ø16 Ø16 59600 A26-AN6 10
A34 38 10 25100 A34-AN6 10
A35 25 13 38200 A35-AN6 10
A36 38 10 23500 A36-AN6 10
A37 32 6 29800 A37-AN6 10
A38 25 25 34500 A38-AN6 10
A39 20 20 47200 A39-AN6 10
6MM SHANK
ATA Points (Vitrified Bond)
Shape Ref. D T Max Speed* ATA Pack Qty
(mm) (mm) (rpm) Product Code
W177 10 20 66000 W177-AN6 10
W178 10 25 55200 W178-AN6 10
W179 10 32 45000 W179-AN6 10
W182 13 3 73400 W182-AN6 10
W185 13 13 61500 W185-AN6 10
W186 13 20 51000 W186-AN6 10
W187 13 25 40000 W187-AN6 10
W188 13 38 30300 W188-AN6 10
W196 16 25 35200 W196-AN6 10
W197 16 50 21000 W197-AN6 10
W201 20 8 47700 W201-AN6 10
W204 20 20 42700 W204-AN6 10
W205 20 25 34500 W205-AN6 10
W208 20 50 18700 W208-AN6 10
W216 25 8 38200 W216-AN6 10
W218 25 13 38200 W218-AN6 10
W220 25 25 25500 W220-AN6 10
W222 25 50 15900 W222-AN6 10
W225 32 6 29800 W225-AN6 10
W226 32 12 29800 W226-AN6 10
W227 32 13 29800 W227-AN6 10
W230 32 32 20400 W230-AN6 10
W232 32 50 14200 W232-AN6 10
W236 38 13 25100 W236-AN6 10
W238 38 38 15600 W238-AN6 10
W242 50 25 19100 W242-AN6 10
*Maximum operating speed at maximum 13mm overhang. (Min insertion 10mm)Order by ATA product code. The grit size for each mounted point shape & size is tuned to achieve optimum stock removal & tool life.Other shapes, sizes & grades available subject to special order conditions, please contact our customer sercive team
6MM SHANK
31
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
Mounted points & wheels.High purity aluminium oxide abrasive grit embedded in a vitrified bond. Spindle mounted.The standard pink AN grade is suitable for surface finishing, deburring and general grinding applications.Typically for use on steels and cast irons.
Shape Ref. D T Max Speed* ATA Pack Qty
(mm) (mm) (rpm) Product Code
A15 6.5 27 33700 A15-AN3 10
A24 6.5 20 45900 A24-AN3 10
B41 16 16 33700 B41-AN3 10
B42 13 20 33700 B42-AN3 10
B44 6 10 68400 B44-AN3 10
B46 3 8 105000 B46-AN3 10
B52 10 20 45300 B52-AN3 10
B53 8 20 42000 B53-AN3 10
B54 6 13 60000 B54-AN3 10
B55 3 6 105000 B55-AN3 10
B71 15 3 59600 B71-AN3 10
B73 13 3 73400 B73-AN3 10
B81 20 5 47700 B81-AN3 10
B91 13 16 34500 B91-AN3 10
B92 6 6 81300 B92-AN3 10
B96 3 6 105000 B96-AN3 10
B97 3 10 105000 B97-AN3 10
B98 2.5 6 105000 B98-AN3 10
B101 16 18 33700 B101-AN3 10
B103 16 6 59600 B103-AN3 10
B104 8 10 68400 B104-AN3 10
B121 Ø13 Ø13 45300 B121-AN3 10
B122 Ø10 Ø10 61600 B122-AN3 10
B123 Ø5 Ø5 104200 B123-AN3 10
B124 Ø3 Ø3 105000 B124-AN3 10
B125 Ø6.3 Ø6.3 81300 B125-AN3 10
B131 13 13 34500 B131-AN3 10
B132 10 13 45300 B132-AN3 10
B135 6 13 60000 B135-AN3 10
W142 2.5 6 105000 W142-AN3 10
W144 3 6 105000 W144-AN3 10
W145 3 10 105000 W145-AN3 10
W146 3 13 105000 W146-AN3 10
W152 5 6 105000 W152-AN3 10
W153 5 10 80800 W153-AN3 10
W154 5 13 70000 W154-AN3 10
W160 6 6 81300 W160-AN3 10
W162 6 10 68400 W162-AN3 10
W163 3 13 60000 W163-AN3 10
W164 6 20 45900 W164-AN3 10
ATA Points (Vitrified Bond)
3MM SHANK
Shape Ref. D T Max Speed* ATA Pack Qty
(mm) (mm) (rpm) Product Code
W170 8 13 55000 W170-AN3 10
W175 10 10 54000 W175-AN3 10
W176 10 13 45300 W176-AN3 10
W200 20 3 47700 W200-AN3 10
W215 25 3 38000 W215-AN3 10
ATA Points (Vitrified Bond)
3MM SHANK
33
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
ATA Points (Resinoid Bond)
These mounted points & wheels are made from aluminium oxide abrasive grit embedded in a resinoid bond & spindle mounted.• Excellent stock removal • Preferred to vitrified mounted points where vibration levels are an issueUses: The standard brown AB grade is suitable for roughing out, deburring & general grinding applications. Ideal for use on steels & cast irons in foundry applications.
A LOW VIBRATION, REDUCED FRACTURE RISK product compared to vitrified products.
Shape Ref. D T Max Speed* ATA Pack Qty
(mm) (mm) (rpm) Product Code
A1 22 63 19800 NA001AB6 10
A3 25 70 16100 NA003AB6 10
A4 32 32 29800 NA004AB6 10
A5 20 28 45000 NA005AB6 10
A11 22 50 19800 NA011AB6 10
W196 16 25 35200 NW196AB6 10
W205 20 25 34500 NW205AB6 10
W208 20 50 18700 NW208AB6 10
W220 25 25 25500 NW220AB6 10
W222 25 50 15900 NW222AB6 10
W227 32 13 29800 NW227AB6 10
W230 32 32 20400 NW230AB6 10
W236 38 13 25100 NW236AB6 10
W237 38 25 15600 NW238AB6 10
W242A 50 13 19100 NW242AAB6 10
*Maximum operating speed at maximum 13mm overhang. (Min insertion 10mm)Order by part number. Grit size tuned to achieve optimum stock removal & tool life relative to product shape & size. Othershapes, sizes & grades available subject to special order conditions, please contact our customer service team.
6MM SHANK
ATA Flex Mounted Points
A, B & W mounted points made from non-woven cotton fabric impregnated with aluminium oxide grit & bonded with either latex (soft GFX grades) or resin(hard MTX grades).• Long life. Non-loading when used on softer metals. • Smooth, chatter-free grinding & polishing resulting in ease of use & low noise & vibration levels.Uses: Suitable for light deburring & very fine to medium surface finishing…..in one step!
A LOW VIBRATION, REDUCED FRACTURE RISK product compared to vitrified and resinoid products.
Shape Ref. D T Max Speed* GFX Grade MFX Grade Pack Qty
(mm) (mm) (rpm) Part No. Part No.
A1 20 63 20900 CA001G CA001M 10
A3 25 70 15500 CA003G CA003M 10
A4 32 32 28500 CA004G CA004M 10
A5 20 28 38500 CA005G CA0045M 10
A11 22 50 25400 CA011G CA011M 10
A12 18 32 38000 CA012G CA012M 10
A14 18 22 43400 CA014G CA014M 10
A15 6 27 50500 CA015G CA015M 10
A21 25 25 35500 CA021G CA021M 10
A23 20 25 40300 CA023G CA023M 10
A24 6 20 56000 CA024G CA024M 10
A26 Ø16 Ø16 48900 CA026G CA026M 10
A37 32 6 30500 CA037G CA037M 10
W178 10 25 40300 CW178G CW178M 10
W185 13 13 44400 CW185G CW185M 10
W196 16 25 34600 CW196G CW196M 10
W201 20 8 44800 CW201G CW201M 10
W204 20 20 36510 CW204G CW204M 10
W205 20 25 32900 CW205G CW205M 10
W220 25 25 30300 CW220G CW220M 10
W222 25 50 20200 CW222G CW222M 10
W225 32 6 30500 CW225G CW225M 10
W228 32 20 30500 CW228G CW228M 10
W230 32 32 25200 CW230G CW230M 10
W236 38 13 25400 CW236G CW236M 10
W242 50 25 19100 CW242G CW242M 10
Grit Sizes: 24, 36, 54, 80, 120, 180 6MM SHANK
35
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
Shape Ref. D T Max Speed* GFX Grade MFX Grade Pack Qty
(mm) (mm) (rpm) Part No. Part No.
A24 6 20 47800 CA024G/3 CA024M/3 10
B41 16 16 59500 CB041G CB041M 10
B52 10 20 64800 CB052G CB052M 10
B91 13 16 61100 CB091G CB091M 10
B111 11 17 62500 CB111G CB111M 10
B121 Ø13 Ø13 62400 CB121G CB121M 10
B122 Ø10 Ø10 68700 CB122G CB122M 10
B125 Ø6.3 Ø6.3 81000 CB125G CB125M 10
W154 5 13 66500 CW154G CW154M 10
W162 6 10 67200 CW162G CW162M 10
W163 6 13 60000 CW163G CW163M 10
W164 6 20 47800 CW164G CW164M 10
W176 10 13 50400 CW176G CW176M 10
W177 10 20 38600 CW177G CW177M 10
W201 20 6 43300 CW201G/3 CW201M/3 10
Grit Sizes: 36, 54, 80, 120, 180, 320
ATA Flex Mounted Points
*Maximum operating speed at maximum 13mm overhang. (Min insertion 10mm)
For ordering please specify part number & grit size.Grit size availability dependent on product shape & size.Other shapes, sizes & grades available subject to special order conditions, please contact our customer service team.
3MM SHANK
D T B Type Shape Grit Grade ATA MOS Pack(mm) (mm) (mm) Product Qty
Code
150 6 31.75 Plain 1 60 L BAGW1000001 35 1
150 6 31.75 Plain 1 80 L BAGW1000002 35 1
150 6 31.75 Plain 1 100 L BAGW1000003 35 1
150 13 31.75 Plain 1 46 L BAGW1000004 35 1
150 13 31.75 Plain 1 60 K BAGW1000005 35 1
150 13 31.75 Plain 1 100 L BAGW1000006 35 1
180 13 31.75 Plain 1 46 K BAGW1000016 35 1
180 13 31.75 Plain 1 60 L BAGW1000017 35 1
180 13 31.75 Plain 1 60 K BAGW1000018 35 1
180 20 31.75 Plain 1 46 K BAGW1000021 35 1
180 20 31.75 Plain 1 60 K BAGW1000023 35 1
180 25 31.75 Recessed 5 46 K BAGW1000027 35 1
180 25 31.75 Recessed 5 60 K BAGW1000028 35 1
200 13 31.75 Plain 1 46 K BAGW2000001 35 1
200 13 31.75 Plain 1 60 K BAGW2000002 35 1
200 13 31.75 Plain 1 60 L BAGW2000003 35 1
250 25 76.2 Plain 1 46 K BAGW2000015 35 1
250 25 76.2 Plain 1 60 K BAGW2000016 35 1
250 25 76.2 Plain 1 60 L BAGW2000017 35 1
300 25 127 Plain 1 46 K BAGW3000001 35 1
300 25 127 Plain 1 60 K BAGW3000003 35 1
300 25 127 Plain 1 80 K BAGW3000005 35 1
300 25 127 Plain 1 100 J BAGW3000006 35 1
300 40 127 Recessed 5 46 K BAGW3000008 35 1
300 40 127 Recessed 5 60 K BAGW3000009 35 1
100 40 31.75 Taper Cup 11 46 K BAGW1000029 32 1
100 40 31.75 Taper Cup 11 60 K BAGW1000030 32 1
100 40 31.75 Taper Cup 11 120 K BAGW1000031 32 1
125 40 31.75 Taper Cup 11 60 K BAGW1000032 32 1
150 13 31.75 Dish 12 46 K BAGW1000033 35 1
150 13 31.75 Dish 12 60 K BAGW1000034 35 1
ATA Grinding Wheels
The ATA Grinding Wheel's are expendable wheels that are composed of an abrasive compound which can be used for various grinding (abrasive cutting)and abrasive machining operations. The wheels are used in grinding machines.
White Aluminium Oxide WheelsWhite aluminium oxide with high friability for grinding very hard & or heat senitive materials.
37
Call Our Sales Office On: 0844 967 0702
www.ataabrasives.co.uk
ATA Grinding Wheels
D T B Type Shape Grit Grade ATA MOS Pack(mm) (mm) (mm) Product Qty
Code
150 13 31.75 Plain 1 46 Med BAGW1000007 35 1
150 13 31.75 Plain 1 60 Med BAGW1000008 35 1
150 20 31.75 Plain 1 46 Med BAGW1000009 35 1
150 20 31.75 Plain 1 60 Med BAGW1000010 35 1
150 25 31.75 Plain 1 46 Med BAGW1000013 35 1
150 25 31.75 Plain 1 60 Med BAGW1000014 35 1
180 20 31.75 Plain 1 46 Med BAGW1000022 35 1
180 20 31.75 Plain 1 60 Med BAGW1000024 35 1
200 20 31.75 Plain 1 46 Med BAGW2000004 35 1
200 20 31.75 Plain 1 60 Med BAGW2000005 35 1
200 25 31.75 Plain 1 46 Med BAGW2000008 35 1
200 25 31.75 Plain 1 60 Med BAGW2000009 35 1
250 25 31.75 Plain 1 46 Med BAGW2000012 35 1
250 25 31.75 Plain 1 60 Med BAGW2000013 35 1
300 25 127 Plain 1 46 K BAGW3000002 35 1
300 25 127 Plain 1 60 K BAGW3000004 35 1
300 40 127 Recessed 5 46 K BAGW3000007 35 1
300 40 127 Recessed 5 60 L BAGW3000010 35 1
Reg. Aluminium Oxide WheelsA tough aluminium oxide suitable for high tensile strength materials.
ATA Grinding Wheels
D T B Type Shape Grit Grade ATA MOS Pack(mm) (mm) (mm) Product Qty
Code
150 20 31.75 Plain 1 60 K BAGW1000011 35 1
150 20 31.75 Plain 1 100 I BAGW1000012 35 1
150 25 31.75 Plain 1 60 K BAGW1000015 35 1
180 13 31.75 Plain 1 60 K BAGW1000019 35 1
180 13 31.75 Plain 1 100 K BAGW1000020 35 1
180 20 31.75 Plain 1 60 K BAGW1000025 35 1
180 20 31.75 Plain 1 100 I BAGW1000026 35 1
200 20 31.75 Plain 1 60 K BAGW2000006 35 1
200 20 31.75 Plain 1 100 I BAGW2000007 35 1
200 25 31.75 Plain 1 60 K BAGW2000010 35 1
200 25 31.75 Plain 1 100 I BAGW2000011 35 1
250 25 31.75 Plain 1 60 K BAGW2000014 35 1
Green Silicon CarbideSilicon Carbide, harder than aluminium oxide. Used for Bronze, Iron, copper, aluminium,stone & carbides.
39www.ataabrasives.co.uk
Recommendations For Use
Always Remember to Wear
Special Services:
Here at ATA Abrasives we are happy to work with you to solve any application problems. If youare unable to find the abrasive you need within the catalogue please call our customer serviceteam on 0844 967 0702 with your requirements.
Consumable & Tool Combinations:
ATA Group manufactures & distributes tools, burrs & consumables, offering you the customer unrivalled expertise in matching the right products for use in your work place using anATA Tool & ATA Abrasive can help to reduce FOTT, LOWER VIBRATION exposure levels &reduce labour costs.
ATA Group are also able to offer it’s customers an on-site benchmark testing service carried outby qualified personnel to the BS-EN ISO5349 quality standard.
The data generated for such testing can prove extremely valuable in supporting the risk assessments taken to assist the management of HAVS within customers workplaces.
ATA offer a FREE on site survey facility to all our customers were we review your current workingpractises & advise you on any improvements. For further information or to book a survey pleasecontact our customer service team on 0844 967 0702.
For further information about ATA Air Tools & Morrisflex Burrs please visit our group website www.atagroupuk.com or contact our customer service team for a free copy of the catalogues.
Ear Protection Face Mask Safety Glasses Protective Gloves
Pneumatic Tools
ATA PNEUMATIC POWER TOOLS
Contents
High Speed Straight Pencil Grinders 1
Engraver Pen 2
High Speed Straight Grinders 3- 5
Anti-Vibration Die Grinder 6
High Power Straight Grinders 7-8
Extended Body Straight Grinders 9-11
Extended Spindle Straight Grinders 12-14
Small Right AngleDisc Sanders & Grinders 15-16
Medium Right AngleDisc Sanders, Grinders,and Accessories 17-19
Large Right AngleDisc Sanders & Grinders 20
Right AngleLow Speed Grinders,Sanders & Polishers 21
StraightLow Speed Grinders,Sanders & Polishers 22
Belt Sanders 23
After Sales Services 24
Replacement Motors 25
Accessories 26-27
ATA is a leading European manufacturer of industrial air tools
and offers a wide range of tools for a variety of metal grinding and
finishing applications. We are committed to providing our
customers with high performance products that maximise
productivity and reduce costs.
Our continued investment in new manufacturing technology and
our constant drive to improve our production processes ensures
ATA are a high quality, cost effective manufacturer in today’s
demanding market.
ATA’s highly experienced technical sales team are on hand to offer
the latest advice on metal removal processes and ensure the best
possible match between tool and consumable for any specific
application. Our customers benefit from ATA’s vibration testing and
tool maintenance programs to ensure maximum safety and
productivity at all times.
Our extensive range of high performance, industrial quality tools
and accessories, coupled with industry leading technical support,
and our dedicated customer service team, enables ATA to offer a
unique customer experience offering unrivalled value for money.
Our new offices and production unit in Killygarry, Co. Cavan, Ireland.
High Speed Straight Pencil Grinders
132mm
20mm
150mm
31mm
Super Fast TURBINE Motor
Model Ref. ST100 SP75R SP60R
Speed (rpm) 100,000 75,000 60,000
Power 0.04kW / 0.06Hp 0.11kW / 0.15Hp 0.11kW / 0.15Hp
Weight (kgs) 0.24 0.15 0.15
Noise Level (dbA) 62 66 63
Standard Collet (mm) 3 (Type CC) 3 (Type CC) 3 (Type CC)
Air Usage (m3/min) 0.17 0.20 0.20
Exhaust Front Rear Rear
Control Roll throttle Roll throttle Roll throttle
Hose Included-M8 Included-M8 Included-M8
Application Sectors• Aerospace• Automotive• Die and Mould
Recommended Consumables• Tungsten Carbide Burrs• Mounted Points• Polishing Points
Key Points - ST100• Turbine Motor• Maintenance Free – no lubrication required• 100,000 rpm gives very fine finish
Areas of UseFine milling, grinding and engraving
Key Points - SP75R / SP60R• High speeds enable precise deburring• Rear exhaust provides quiet operation• Slim body can be held like a pen for detailed work
Areas of UseSuitable for precision deburring and fine grinding
ST100 SP75R SP60R
M Replacement motors available.
M M
1
Engraver Pen
Model Ref. ENGRAVAPEN
Air Supply Pressure Bar 6-7
Frequency 540 strokes/sec
Weight (kgs) 0.15
Noise Level (dbA) 65
Air Usage (m3/min) 0.02
Hose Length (m) 2.5
Control Roll throttle
Hose Included
17mm
140mm
Application Sectors• Component Identification• Anti-theft Marking• Design
Recommended Consumables• Tungsten Carbide Stylus
Key Points• Provides sharp and deep continuous lines
• Low vibration for operator safetyand comfort
• Slim body can be held like a pen forgood control
• Easy to maintain - only one drop ofoil a day
Areas of Use• Engraving of metal, glass, wood,plastic, plaster, rock and marble
Actual Size
2
Model Ref. S50 S50L S50LR
Speed (rpm) 50,000 50,000 50,000
Power 0.19kW / 0.25Hp 0.19kW / 0.25Hp 0.19kW / 0.25Hp
Weight (kgs) 0.36 0.46 0.46
Noise Level (dbA) 70 70 68
Standard Collet (mm) 6 (Type CB) 6 (Type CB) 6 (Type CB)
Air Usage (m3/min) 0.45 0.45 0.45
Exhaust Front Front Rear
Control Push Pull Lever throttle Lever throttle
Hose Option-1/4” Option-1/4” Included-1/8”
High Speed Straight Grinders
145mm
163mm
34mm
34mm
34mm
165mm
M M M
M Replacement motors available.
Application Sectors• Aerospace• Automotive• Die and Mould
Recommended Consumables• Tungsten Carbide Burrs• Mounted Points• Polishing Points
Key Points• Wide range of tools with speeds to suit every application• Lightweight designs for single handed operation• Heavy duty versions available for tough applications
Areas of UseHeavy grinding, deburring, general stock removaland polishing
S50 S50LR SD45R SD45LR SD37L SDH37LR
3
Model Ref. SD37L SD37LR SDH37L SDH37LR
Speed (rpm) 37,000 37,000 37,000 37,000
Power 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp
Weight (kgs) 0.46 0.46 0.56 0.56
Noise Level (dbA) 75 74 75 74
Standard Collet (mm) 6 (Type CB) 6 (Type CB) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.57 0.57 0.57 0.57
Exhaust Front Rear Front Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Option-1/4” Included-1/4”
High Speed Straight Grinders
Model Ref. SD45R SD45R-CC SD45LR SD45LR-CC
Speed (rpm) 45,000 45,000 45,000 45,000
Power 0.15kW / 0.20Hp 0.15kW / 0.20Hp 0.15kW / 0.20Hp 0.15kW / 0.20Hp
Weight (kgs) 0.24 0.24 0.24 0.24
Noise Level (dbA) 64 64 64 64
Standard Collet (mm) 3 (Type CB) 3 (Type CC) 3 (Type CB) 3 (Type CC)
Air Usage (m3/min) 0.23 0.23 0.23 0.23
Exhaust Rear Rear Rear Rear
Control Roll throttle Roll throttle Lever throttle Lever throttle
Hose Included-M8 Included-M8 Included-M8 Included-M8
149mm
26mm
140mm
26mm
146mm
26mm
36mm
167mm
36mm
167mm
36mm
HEAVYDUT Y
194mm
36mm
HEAVYDUT Y
194mm
140mm
26mm
M M
M Replacement motors available.
M M M M
4
Model Ref. SD26L SD26LR SDH26L SDH26LR
Speed (rpm) 25,000 25,000 25,000 25,000
Power 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp
Weight (kgs) 0.46 0.46 0.56 0.56
Noise Level (dbA) 73 72 73 72
Standard Collet (mm) 6 (Type CB) 6 (Type CB) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.57 0.57 0.57 0.57
Exhaust Front Rear Front Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Option-1/4” Included-1/4”
High Speed Straight Grinders
Model Ref. SD30L SD30LR SDH30L SDH30LR
Speed (rpm) 30,000 30,OOO 30,000 30,000
Power 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp
Weight (kgs) 0.46 0.46 0.46 0.46
Noise Level (dbA) 73 73 74 73
Standard Collet (mm) 6 (Type CB) 6 (Type CB) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.57 0.57 0.57 0.57
Exhaust Front Rear Front Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Option-1/4” Included-1/4”
36mm
167mm
36mm
167mm
36mm
167mm
36mm
167mm
M M
M M
5
36mm
HEAVYDUT Y
194mm
36mm
HEAVYDUT Y
194mm
36mm
HEAVYDUT Y
194mm
36mm
HEAVYDUT Y
194mm
Anti-Vibration Die Grinder
Model Ref. SV27LR
Speed (rpm) 25,000
Power 0.75kW / 1.00Hp
Weight (kgs) 0.85
Noise Level (dbA) 72
Standard Collet (mm) 6 (Type CA)
Air Usage (m3/min) 0.92
Exhaust Rear
Control Lever throttle
Hose Included-1/4”
42mm
210mm
Application Sectors• Aerospace• Automotive• Die and Mould• Fabrication• Foundries• Shipyards
Recommended Consumables• Tungsten Carbide Burrs• Mounted Points
Key Points• Unique suspended motordesign dramatically reducestool vibration
• Reduced vibration improvesoperator comfort andextends consumable life
• Fast stock removal andsuperior surface finish
Areas of UseDeburring and generalstock removal
Actual Size
6
100%
Noise Vibration
Standard
SV27LR
80%
60%
40%
20%
0%
Model Ref. S22L S22LR S22LHD S22LRHD
Speed (rpm) 22,000 22,000 22,000 22,000
Power 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 0.93 1.00 1.10 1.20
Noise Level (dbA) 71 70 71 70
Standard Collet (mm) 6 (Type CA) 6 (Type CA) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.85 0.85 0.85 0.85
Exhaust Front Rear Front Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Option-1/4” Included-1/4”
High Power Straight Grinders
HEAVYDUT Y
42mm
184mm
42mm
189mm
42mm
185mm
HEAVYDUT Y
42mm
190mm
Application Sectors• Aerospace• Automotive• Die and Mould• Fabrication• Foundries• Shipyards
Recommended Consumables• Tungsten Carbide Burrs• Mounted Points• Flap Wheels• Abrasive Bands
Key Points• A wide range of tools and speeds available tosuit all applications
• Powerful motor produces good surface finish
• Front and rear exhaust options
Areas of UseGeneral sanding, blending, deburring and polishing
S22LRHD S10L
M M M M
M Replacement motors available. 7
Model Ref. S10L S10LR S10LHD S10LRHD
Speed (rpm) 10,000 10,000 10,000 10,000
Power 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 0.93 1.00 1.10 1.20
Noise Level (dbA) 65 64 65 64
Standard Collet (mm) 6 (Type CA) 6 (Type CA) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.85 0.85 0.85 0.85
Exhaust Front Rear Front Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Option-1/4” Included-1/4”
High Power Straight Grinders
Model Ref. S16L S16LR S16LHD S16LRHD
Speed (rpm) 16,000 16,000 16,000 16,000
Power 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 0.93 1.00 1.10 1.20
Noise Level (dbA) 66 65 66 65
Standard Collet (mm) 6 (Type CA) 6 (Type CA) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.85 0.85 0.85 0.85
Exhaust Front Rear Front Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Option-1/4” Included-1/4”
42mm
184mm
42mm
184mm
42mm
189mm
42mm
189mm
HEAVYDUT Y
42mm
185mm
HEAVYDUT Y
42mm
185mm
HEAVYDUT Y
42mm
190mm
HEAVYDUT Y
42mm
190mm
MM M M
MM M M
M Replacement motors available.8
Extended Body Straight Grinders
Model Ref. SDX37LR SDX30LR SDX26LR SHG18LR
Speed (rpm) 37,000 30,000 25,000 18,000
Power 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp 1.12kW / 1.50Hp
Weight (kgs) 0.80 0.80 0.80 2.50
Noise Level (dbA) 74 73 72 70
Standard Collet (mm) 6 (Type CA) 6 (Type CA) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.57 0.57 0.57 1.13
Exhaust Rear Rear Rear Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Included-1/4” Included-1/4” Included-1/4” Included-1/2”
36mm
285mm
36mm
285mm
36mm
285mm
50mm
371mm
Application Sectors• Automotive• Fabrication• Foundries• Shipyards
Recommended Consumables• Tungsten Carbide Burrs• Mounted Points• Flap Wheels• Abrasive Bands
Key Points• Extended body for two handed operation andimproved control
• Spindle mounted on precision ball bearings forefficient operation
• Wide range of speeds for all applications
• Powerful motor provides good surface finish
Areas of UseHeavy duty grinding, deburring, sanding and polishing
SDX37LR
SHG18LR
SDX37LR
9
Model Ref. STX16L STX16LR STX16LHD STX16LRHD
Speed (rpm) 16,000 16,000 16,000 16,000
Power 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 1.40 1.40 1.60 1.60
Noise Level (dbA) 66 65 66 65
Standard Collet (mm) 6 (Type CA) 6 (Type CA) 6 (Type CA) 6 ((Type CA)
Air Usage (m3/min) 0.85 0.85 0.85 0.85
Exhaust Front Rear Front Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Option-1/4” Included-1/4”
Model Ref. STX22L STX22LR STX22LHD STX22LRHD
Speed (rpm) 22,000 22,000 22,000 22,000
Power 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 1.40 1.40 1.60 1.60
Noise Level (dbA) 71 70 71 71
Standard Collet (mm) 6 (Type CA) 6 (Type CA) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.85 0.85 0.85 0.85
Exhaust Front Rear Front Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Option-1/4” Included-1/4”
Extended Body Straight Grinders
HEAVYDUT Y
HEAVYDUT Y
HEAVYDUT Y
HEAVYDUT Y
43mm
316mm
43mm
316mm
43mm
316mm
43mm
316mm
43mm
315mm
43mm
315mm
43mm
315mm
43mm
315mm
M Replacement motors available.10
Model Ref. STX10L STX10LR STX10LHD STX10LRHD
Speed (rpm) 10,000 10,000 10,000 10,000
Power 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 1.40 1.40 1.60 1.60
Noise Level (dbA) 65 64 65 64
Standard Collet (mm) 6 (Type CA) 6 (Type CA) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.85 0.85 0.85 0.85
Exhaust Front Rear Front Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Option-1/4” Included-1/4”
Extended Body Straight Grinders
HEAVYDUT Y
HEAVYDUT Y
43mm
316mm
43mm
316mm
43mm
315mm
43mm
315mm
STX22LRHD
STX22L
11
Model Ref. SD37LR-125 SD30LR-125 SDH37LR-150 SDH30LR-150
Speed (rpm) 37,000 30,000 37,000 30,000
Power 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp
Weight (kgs) 0.54 0.54 0.82 0.82
Noise Level (dbA) 74 73 73 73
Standard Collet (mm) 6 (Type CB) 6 (Type CB) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.57 0.57 0.57 0.57
Exhaust Rear Rear Rear Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Included-1/4” Included-1/4” Included-1/4” Included-1/4”
Extended Spindle Straight Grinders
HEAVYDUT Y
HEAVYDUT Y
36mm
271mm
36mm
271mm
36mm
288mm
36mm
288mm
Application Sectors• Aerospace• Automotive• Fabrication• Foundries
Recommended Consumables• Tungsten Carbide Burrs• Mounted Points• Flap Wheels• Abrasive Bands
Key Points• A wide range of speeds and spindle configurationsfor grinding in hard to reach areas
• Compact high power tool for single handed operation
Areas of UseAll types of grinding, deburring, finishing and polishing in areaswith restricted access
SD37LR-125 SD26L-ES
12
Model Ref. SX22LR SX22LR/2 SX22LR/2-3
Speed (rpm) 22,000 22,000 22,000
Power 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 1.17 1.27 1.27
Noise Level (dbA) 70 70 70
Standard Collet (mm) 6 (Type CB) 6 (Type CA) 6 (Type CB)
Air Usage (m3/min) 0.85 0.85 0.85
Exhaust Rear Rear Rear
Control Lever throttle Lever throttle Lever throttle
Hose Included-1/4” Included-1/4” Included-1/4”
Extended Spindle Straight Grinders
Model Ref. SD26L-ES SD26LR-ES SD26LR-125 SDH26LR-150
Speed (rpm) 25,000 25,000 25,000 25,000
Power 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp
Weight (kgs) 0.45 0.45 0.54 0.82
Noise Level (dbA) 72 72 72 72
Standard Collet (mm) 3 (Type CD) 3 (Type CD) 6 (Type CB) 6 (Type CA)
Air Usage (m3/min) 0.57 0.57 0.57 0.57
Exhaust Front Rear Rear Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Included-1/4” Included-1/4”
36mm
271mm
36mm
233mm
36mm
337mm
36mm
232mm
HEAVYDUT Y
36mm
288mm
40mm
321mm
40mm
316mm
13
Model Ref. SX10LR SX10LR/2 SX10LR/2-3
Speed (rpm) 10,000 10,000 10,000
Power 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 1.17 1.27 1.27
Noise Level (dbA) 64 64 64
Standard Collet (mm) 6 (Type CB) 6 (Type CA) 6 (Type CB)
Air Usage (m3/min) 0.85 0.85 0.85
Exhaust Rear Rear Rear
Control Lever throttle Lever throttle Lever throttle
Hose Included-1/4” Included-1/4” Included-1/4”
Extended Spindle Straight Grinders
Model Ref. SX16LR SX16LR/2 SX16LR/2-3
Speed (rpm) 16,000 16,000 16,000
Power 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 1.17 1.27 1.27
Noise Level (dbA) 65 65 65
Standard Collet (mm) 6 (Type CB) 6 (Type CA) 6 (Type CB)
Air Usage (m3/min) 0.85 0.85 0.85
Exhaust Rear Rear Rear
Control Lever throttle Lever throttle Lever throttle
Hose Included-1/4” Included-1/4” Included-1/4”
43mm
337mm
43mm
337mm
43mm
321mm
43mm
316mm
43mm
321mm
43mm
316mm
14
Small Right Angle Disc Sanders & Grinders
Model Ref. RP25R RA20LR RA20LRX-125 RA20LRX-75
Speed (rpm) 25,000 20,000 20,000 20,000
Power 0.11kW / 0.15Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp
Weight (kgs) 0.23 0.52 0.70 0.65
Noise Level (dbA) 68 74 74 74
Standard Collet (mm) 3 (Type CD) 6 (Type CB) 6 (Type CB) 6 (Type CB)
Air Usage (m3/min) 0.20 0.57 0.57 0.57
Exhaust Rear Rear Rear Rear
Control Roll Throttle Lever throttle Lever throttle Lever throttle
Hose Included-1/4” Included-1/4” Included-1/4” Included-1/4”
20mm
140mm
31mm
36mm
162mm
Application Sectors• Aerospace• Automotive• Die and Mould• Fabrication
Recommended Consumables• Grinding Discs• Sanding Discs• Quick Change Discs• Mounted Points• Flap Wheels• Abrasive Bands
Key Points• A wide range of speeds to suitevery application
• Front, side and rear exhaust options
• Compact design for single handed use
• Optional side handle provides greater control,RA13C only
Areas of UseFor sanding, grinding, deburring, finishingand polishing with consumables of20–75mm diameter
RA20LR
RA13C
15
36mm
162mm
36mm
162mm
RP25R
Small Right Angle Disc Sanders & Grinders
Model Ref. RA13C RA10LR RA10LRX-125 RA10LRX-75
Speed (rpm) 13,000 12,000 12,000 12,000
Power 0.82kW / 1.10Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp
Weight (kgs) 1.5 0.52 0.70 0.65
Noise Level (dbA) 72 71 71 71
Standard Collet (mm) 6 (Type CA) 6 (Type CB) 6 (Type CB) 6 (Type CB)
Air Usage (m3/min) 0.92 0.57 0.57 0.57
Exhaust Front Rear Rear Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Included-1/4” Included-1/4” Included-1/4”
40mm
205mm
Model Ref. RA17
Speed (rpm) 17,000
Power 0.37kW / 0.50Hp
Weight (kgs) 1.20
Noise Level (dbA) 70
Flange Size (mm) 15.9
Air Usage (m3/min) 0.57
Exhaust Front
Control Trigger
Hose Option-1/4”
144mm
135mm
Application Sectors• Aerospace• Automotive• Die and Mould• Fabrication
Recommended Consumables• Grinding Discs• Sanding Discs• Quick Change Discs• Tungsten Carbide Burrs• Mounted Points• Flap Wheels• Abrasive Bands
Key Points• Supplied complete with direct fitting attachmentfor ATADISC and SCRULOCK disc systems
• Pistol grip for comfortable single handed operation
• Front exhaust clears chips away from work piece
• Collet chuck option (Type CA) for 3, 6, 8and 10mm spindles
• Key chuck option for spindles 0.5 to 6mm
Areas of UseFor light sanding, grinding, deburring, finishing and polishingwith consumables of 20–75mm diameter
16
36mm
162mm
36mm
162mm
36mm
162mm
Model Ref. RA14-100DS1 RA14-115DSI RA14-115PA4 RA14-125PA4
Speed (rpm) 15,000 13,000 13,000 12,000
Power 1.10kW / 1.50Hp 1.10kW / 1.50Hp 1.10kW / 1.50Hp 1.10kW / 1.50Hp
Weight (kgs) 1.90 1.90 1.90 1.90
Noise Level (dbA) 79 79 77 75
Flange Size (mm) 15.9 22.2 22.2 22.2
Air Usage (m3/min) 1.13 1.13 1.13 1.13
Exhaust Side Side Side Side
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/2” Option-1/2” Option-1/2” Option-1/2”
40mm
261mm
40mm
Medium Right Angle Disc Sanders & Grinders
Application Sectors• Aerospace• Automotive• Fabrication• Foundries• Shipyards
Recommended Consumables• Grinding Discs• Flap Wheels• Cutting Discs
Areas of UseFor heavy sanding, grinding,deburring, finishing and polishingwith consumables of100-125mm diameter
Key Points• 3 speed options to suit diameter100mm, 115mm and 125mm discs
• Front, side and rear exhaust options• Small machine size for single handed use• Optional side handle provides greater control• Dynamic auto-balancing optionalfor reduced vibration
RA14-115PA4
For exhaust, spindle and handle options see page 19 of the catalogue.
RA14-125DS1 RA14-125RS1 RA14-125RA4
RA13S-100
17
261mm
Model Ref. RA13-100 RA13-115 RA13S-100 RA13S-115
Speed (rpm) 13,000 13,000 13,000 13,000
Power 0.82kW / 1.10Hp 0.82kW / 1.10Hp 0.82kW / 1.10Hp 0.82kW / 1.10Hp
Weight (kgs) 1.60 1.60 1.60 1.60
Noise Level (dbA) 73 73 73 73
Flange Size (mm) 15.9 22.2 15.9 22.2
Air Usage (m3/min) 0.92 0.92 0.92 0.92
Exhaust Front Front Front Front
Control Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/4” Option-1/4” Option-1/4” Option-1/4”
Medium Right Angle Disc Sanders & Grinders
40mm
205mm
Model Ref. RA14-125DS1 RA14-125RS1 RA14-125RA4 RA14S-125DS1 RA14S-125RS1
Speed (rpm) 12,000 12,000 12,000 12,000 12,000
Power 1.10kW / 1.50Hp 1.10kW / 1.50Hp 1.10kW / 1.50Hp 1.10kW / 1.50Hp 1.10kW / 1.50Hp
Weight (kgs) 1.90 1.90 1.90 1.90 1.90
Noise Level (dbA) 79 75 75 79 75
Flange Size (mm) 22.2 22.2 22.2 22.2 22.2
Air Usage (m3/min) 1.13 1.13 1.13 1.13 1.13
Exhaust Side Rear Rear Side Rear
Control Lever throttle Lever throttle Lever throttle Lever throttle Lever throttle
Hose Option-1/2” Included-1/2” Included-1/2” Option-1/2” Included-1/2”
40mm
261mm
40mm
261mm
40mm
265mm
40mm
265mm
40mm
205mm
18
19
ATA Accessories
Options for the RA14 range of Disc Sanders & Grinders
TYPE 1-22 and TYPE 1-16Standard threaded flange with safety screw.TYPE 1-22 for wheelswith 22mm (7/8”) centre hole.TYPE 1-16 for wheelswith 16mm (5/8”) centre hole.Note: 1-22 can be converted to Type 3-5/8 by removingflange and adding spacer Part No: 233-105-10
TYPE 8-M14Threaded spindle for threaded centre hubbedwheels or other thread on consumables such aswire brushes.
TYPE 4Dynamic autobalance system counteracts wheelimbalance. Low vibration increases wheel life &reduces operator fatigue. Quick fit locking flange foreasy wheel change - use only common hex wrench.Available only for wheels with 22mm (7/8”)centre hole.
Spindle Options for Disc Grinders
TYPE 8-M14Threaded spindle for threaded centre backing pads.Available with threads 5/8-11, 3/8-24 and M14.
TYPE 4Dynamic autobalance system counteracts imbalance.Available only for discs with 22mm (7/8”) centre hole.
Spindle Options for Disc Sanders
TYPE 1-22 and TYPE 1-16Standard threaded flange.TYPE 1-22 for discswith 22mm (7/8”) centre hole.TYPE 1-16 for discs with16mm (5/8”) centre hole.
Type ARugged all rubber handle.Comfortable ergonomic design withrubber isolation buffer for reducedvibration from the process.Part No: 140-792-10
Exhaust Options
Type DDiffuser for noise reduction.
Type PPiston type for noise reductionwith reduced shut off noise.
Type RRear exhaust.
Type SSolid handle rugged designPart No: 140-756-20
Side Handle Options
RA14 -125 D S 1
Disc Dia (mm)
Exhaust Type
Side Handle Type
Spindle Type
Guide to Model Ref.
Large Right Angle Disc Sanders & Grinders
Model Ref. RA8AVH RA6AVH
Speed (rpm) 8,500 6,500
Power 1.50kW / 2.00Hp 1.50kW / 2.00Hp
Weight (kgs) 3.5 3.5
Noise Level (dbA) 79 79
Flange Size (mm) 22.2 22.2
Air Usage (m3/min) 1.90 1.90
Exhaust Front Front
Control Lever throttle Lever throttle
Hose Option-3/4” Option-3/4”
40mm
326mm
Application Sectors• Aerospace• Ship Building• Foundries• Fabrication• Automotive
Recommended Consumables• Grinding Discs• Cutting Discs• Resin Fibre Discs• Flap Wheels
Key Points• Supplied with anti-vibration handle as standard• Rugged design for the most demanding environments• Use 230mm wheels on model RA6• Use 170mm wheels on model RA8
Areas of UseFor heavy sanding, grinding, deburring and finishing withconsumables of 170-230mm diameter
RA8AVH
20
Model Ref. RAB4LR RAB4LRX-125 RAB4LRX-75 RA5 RA2
Speed (rpm) 3,500 3,500 3,500 5,500 2,700
Power 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.82kW / 1.10Hp 0.82kW / 1.10Hp
Weight (kgs) 0.69 0.71 0.70 2.75 2.75
Noise Level (dbA) 67 67 67 69 68
Standard Collet (mm) 6 (Type CB) 6 (Type CB) 6 (Type CB) - -
Flange Size (mm) - - - 22.2 22.2
Air Usage (m3/min) 0.57 0.57 0.57 0.92 0.92
Exhaust Rear Rear Rear Front Front
Hose Included-1/4” Included-1/4” Included-1/4” Option-1/4” Option-1/4”
Right Angle Low Speed Grinders, Sanders & Polishers
40mm
279mm
36mm
182mm
Application Sectors• Aerospace• Automotive• Die and Mould• Fabrication• Foundries• Shipyards
Key Points - RAB4LR• Designed to reduce overheating and sparkingon titanium
• Planetary gear system provides high torque atlow speeds
• Extended range available for hard to reach areas
Areas of Use - RAB4LRFor grinding, sanding, finishing and polishing work ontitanium,stainless steel, aluminium, fibre glass and wood
Key Points - RA5/RA2• Oil re-circulation system prolongs gear life• Low height improves access to work piece• Lightweight and durable construction• Side handle may be fitted left or right to suit operator
Areas of Use - RA5/RA2For grinding and sanding operations with consumablesof 178-230mm diameter
RAB4LRRA5
21
36mm
182mm
36mm
182mm
All have Lever Control
5/8” - 11mmStandard Thread
M14 - Option
Recommended Consumables• Grinding Discs• Sanding Discs• Quick Change Discs• Flap Wheels• Abrasive Bands
Model Ref. STX5L STX5LR STX3L STX3LR
Type Straight / Angle Straight Straight Straight Straight
Speed (rpm) 5,000 5,000 3,000 3,000
Power 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 1.60 1.60 1.60 1.60
Noise Level (dbA) 66 65 64 63
Standard Collet (mm) 6 (Type CA) 6 (Type CA) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.85 0.85 0.85 0.85
Exhaust Front Rear Front Rear
Hose Option-1/4” Included-1/4” Option-1/4” Included-1/4”
Straight Low Speed Grinders, Sanders & Polishers
Model Ref. SB10LR SB5LR S5L S5LR
Type Straight / Angle Straight Straight Straight Straight
Speed (rpm) 9,000 5,000 5,000 5,000
Power 0.30kW / 0.40Hp 0.30kW / 0.40Hp 0.63kW / 0.85Hp 0.63kW / 0.85Hp
Weight (kgs) 0.60 0.60 1.30 1.30
Noise Level (dbA) 68 68 66 65
Standard Collet (mm) 6 (Type CA) 6 (Type CA) 6 (Type CA) 6 (Type CA)
Air Usage (m3/min) 0.57 0.57 0.85 0.85
Exhaust Rear Rear Front Rear
Hose Included-1/4” Included-1/4” Option-1/4” Included-1/4”
All have Lever Control
40mm
40mm
220mm
43mm
345mm
232mm
43mm
345mm
43mm
350mm
43mm
350mm
All have Lever Control
40mm
184mm
SB5LR
S5L
STX5LR
22
Belt Sanders
350mm
36mm
36mm
278mm
Standard Contact Wheel Arm for RAL20L
RecommendedConsumables• Grinding Belts
Application Sectors• Aerospace• Automotive• Fabrications• Foundries• Machine Shops
Key Points• Rapid belt change• No tools required tochange contact wheel arm
• Supplied withstandard arm
Part No: 516-015-20 480mm x 20mm BeltOrder Platen Separately.Part No: 516-022-20
Soft Platen Supplied.
Order Platen Separately.Part No: 516-022-20
Soft Platen Supplied.
Rubber Wheel. 25mm Dia.
Part No: 516-029-20 480mm x 25mm Belt
Part No: 516-025-20 610mm x 12mm Belt
Part No: 516-026-20 480mm x 12mm BBelt
Part No: 516-028-20 480mm x 20mm Belt
Part No: 516-024-20 480mm x 12mm Belt
Order Platen Separately.Part No: 516-022-20
Part No: 516-027-20 457mm x 20mm Belt
Order Platen Separately.Part No: 516-022-20
Rubber Wheel. 25mm Dia.
Steel Wheel. 8mm Dia.
Steel Wheel. 16mm Dia.
Order Platen Separately.Part No: 516-022-20
Rubber Wheel. 25mm Dia.
Rubber Wheel. 14mm Dia.
Rubber Wheel. 25mm Dia.
Standard Contact Wheel Arm for BL16L
Optional Contact Wheel Arms for BL16L
Model Ref. BL16L
Speed (rpm) 16,000
Power 0.37kW / 0.50Hp
Weight (kgs) 1.3
Standard Belt Size (mm) 480x20
Noise Level (dbA) 73
Air Usage (m3/min) 0.60
Exhaust Front
Control Lever throttle
Hose Option-1/4”
Areas of UseLinishing on small components or in hard to reach areas
23
Part No: 515-133-20 305mm x 12mm BeltRubber Wheel. 16mm Dia.
Part No: 515-134-20 457mm x 12mm BeltRubber Wheel. 16mm Dia.
Part No: 515-136-20 457mm x 12mm BeltSteel Wheel. 8mm Dia.
Part No: 515-135-20 305mm x 12mm BeltSteel Wheel. 8mm Dia.
Part No: 515-137-20 305mm x 6mm BeltSteel Wheel. 8mm Dia.
Part No: 515-138-20 457mm x 6mm BeltSteel Wheel. 8mm Dia.
Part No: 515-100-20 330mm x 12mm BeltRubber Wheel. 16mm Dia.
Part No: 515-071-20 305mm x 12mm Belt
All arms are supplied with soft platen fitted.
Rubber Wheel. 8mm Dia.
Model Ref. RAL20L
Speed (rpm) 20,000
Power 0.30kW / 0.40Hp
Weight (kgs) 0.85
Standard Belt Size (mm) 12x305
Noise Level (dbA) 74
Air Usage (m3/min) 0.57
Exhaust Rear
Control Lever throttle
Hose Included-1/4”
Optional Contact Wheel Arms for RAL20L
Additional Arm Types available on request.
ATA After Sales Services
egular maintenance is a critically important factor when RegularRegular maintenance is a crucial factor when assessing ongoingefficiency and safety of tool use. ATA’s policy of pricing qualityspare parts economically enables routine preventativemaintenance to be carried out cost-effectively. This contributes toreduced risk of vibration related injuries and can extend the life ofboth tool and consumable.
Managing Vibration TodayHand Arm Vibration Syndrome (HAVS) and work related upper limb disorder(WRULD) are collective terms covering a number of potential serious injuriesassociated with extensive use of percussion and rotary tools, of whichvibration white finger (VWF) is the most commonly recognised. It has beenwidely acknowledged that vibration generated from hand held power tools isthe major contributory factor in such ailments and unless managed in linewith current EU legislation and standards the loss of potential downtimefrom potential injury cannot be guaranteed.
All of our products and services have been designed and implementedrecognising the related vibration risk. ATA strive to deliver the customermaximum productivity whilst ensuring minimum impact to operators health.Continuous improvements to assist vibration and noise management such asergo sleeves, auto-balancers, anti vibration handles and rear exhausts havebeen designed to optimise efficiency in order to reduce finger on trigger time(FOTT). We aim to ensure consumables are matched to grinders foroptimum performance and both are manufactured to comply with all CEregulations. Our close relationship to our sister companies producing burrsand other abrasive consumables provides competitive advantage in ourunparalled product knowledge in the best tool to consumable combinationoffering the lowest possible vibration and higest possible productivity.
ATA Preventative Maintenance ProgrammeAt ATA we offer to assist customers’ vibration management systems.A tool survey is undertaken to start the programme to assist customers’ riskassessments. Vibration levels are sustained at benchmark levels throughoutthe tools life. Service, repair and quality checks are all part of the serviceoffered. Tools register maintained for customers.
Stage oneATA personnel create a tool register where the tools are etched with anidentifier. Initial tools for recall are agreed along with the frequency. A recallnotice is issued to the appointed customer representative who arranges theirprompt return.
Stage twoThe tools are booked into the workshop and a job card created. Tools areinspected and serviced, any remedial work is identified and communicatedby written quote, the tools are bench tested for run-out, vibration levels andspeed. Information is captured both on a delivery note and on the toolrecord card. Tools are then returned to the customer.
Our service gives customers a guarantee that tools are being maintained tothe highest standard, with original parts being used throughout.This programme provides the following benefits:
• Managed Tool Population• Safely Maintained Tools• More Consistent Costs• Tool Monitors• Correctly Matched Tools/Consumables• Convenient Delivery/Collection Service• Continuous Process Advice
For moreinformation onthis service pleasecontact ATA
Grinder repairs workshop.
Bench test area.
24
25
ATA offers a replacement motor facility on various models shownbelow in the table and with the symbol by the tool throughoutthe catalogue.
• This allows downtime to be kept to a minimum.
• Replacement motors can be easily installed with proper training andequipment provide by ATA.
• After repair with a replacement motor, the customer has theequivalent of a new tool for a fraction of the cost.
• These motors come with the same guarantee as new tools.The original motor can again be repaired, (Using ATA replacementvanes bearings etc.) in the repair departments own time, or by ATA.The motor can then be ready for the next tool service.
• The use of replacement motors prevents the customer having tocarry stock of extra tools to cover for tool breakdown.
Model Ref. Part No:
SP75R RM60/75
SP60R RM60/75
S50 RM50
S50L RM50
S50LR RM50
SD45R RMSD45
SD45R-CC RMSD45CC
SD45LR RMSD45
SD45LR-CC RMSD45CC
SD37L RMSD37
SD37LR RMSD37
SD30L RMSD30
SD30LR RMSD30
SD26L RMSD26
SD26LR RMSD26
S22L RM22
S22LR RM22
S22LHD RM22
S22LRHD RM22
S16L RM16
S16LR RM16
S16LHD RM16
S16LRHD RM16
S10L RM10
S10LR RM10
S10LHD RM10
S10LRHD RM10
BL16L RM15
1 Loosen
3 Replace motor 4 Tighten
2 Disassemble
MotorM
M
ATA Replacement Motors
ATA Accessories
Size Part No: Part No: Part No: Part No:
3/32” N/A N/A 133-103-10 133-113-10
1/8” 133-123-10 133-126-10 133-102-10 133-112-10
1/4” 133-107-10 133-116-10 N/A N/A
3/8” 133-125-10 N/A N/A N/A
2.34mm N/A N/A 133-103-10 133-113-10
3.0mm 133-123-10 133-126-10 133-101-10 133-115-10
6.0mm 133-121-10 133-122-10 N/A N/A
8.0mm 133-124-10 N/A N/A N/A
10.mm 133-106-10 N/A N/A N/A
ATA Collets
Special size collets available, please contact ATA and quote collet typeand shank diameter required.
FL-1/4 Manual drain filter with micro fog 1/4” 40 1.2lubricator and mounting bracket.
AFL-1/4 Automatic drain filter with micro fog 1/4” 40 1.2lubricator and mounting bracket.
AFLRG-1/4 Automatic drain filter with regulator, gauge, 1/4” 40 1.2micro fog lubricator and mounting bracket.
FL-1/2 Automatic drain filter with micro fog 1/2” 120 3.4lubricator and mounting bracket.
AFLRG-1/2 Automatic drain filter with regulator, gauge, 1/2” 120 3.4micro fog lubricator and mounting bracket.
Part No:ConnectionThread
Max Air Flow at6.3 bar - 90psi
SCFM - Cu.M/minTy p e
Toggle Lever: Fits all models.Part No: 140-650-20
Lever Pin: Part No: 140-141-00Punch for removing lever pin:Part No: 140-050-10
ATA Swivel ConnectorATA Swivel connectors are available for all tools with 1/4”inlet thread. The swivel connector makes it easier to work inawkard areas and helps to reduce operator strain.Connectors have a 25 degree bending angle and 360 degreeswivel with no pressure loss.They have a very smooth operationand are trouble free.
1/4 Female x 1/4 Male Swivel Connector.Part No: 166-860-00
Slide Lever: Fits all models exceptRA14,RA10/20, RAB4LR, SB5LR, SD range.Part No: 140-719-20
26
Stripping KitsRegular maintenance is a critically important factor whenassessing on going efficiency and safety in use. With thisregard ATA have a policy of low cost spare parts to enableroutine, preventative maintenance to be carried out.In addition to our in-house repair facility, we offer explosiondiagrams for spare parts, stripping instructions and strippingkits are available for all tools.
All tools conform with EC machinery directive andits amendments and CE marking directive 98/37/EC.
ATA Throttle Levers
Type CA CB CC CD
ATA Vitalizer UnitsThe ATA vitalizer units removemoisture and harmful solidsfrom the air stream and createan airborne ‘microfog’ of oilwhich lubricates your ATA airmotor, maintaining performanceand ensuring long service life.
Simple Lever: Fits all models. Check yoursafety legislation before fitting this lever.Part No: 140-342-10
ATA Accessories
Air Inlet & Exhaust Hose AssembliesATA Superflex hose assemblies are made from highperformance PVC material with polyester fibrereinforcing. Their low weight and extra flexibility incombination with our low weight tools makes anideal ergonomic solution.On rear exhaust tools, ATA exhaust overhoses maybe used for remote exhaust and lower noise levels.Where rear exhaust overhoses are used, hoseswith special silencer foams may be used to furtherreduce noise levels.
Tool Inlet Hose Assembly Superflex Exhaust Overhose Inlet and ExhaustThread Thread Details Inlet Hose (for rear exhaust tools)
M8 Female M8 Male Part No: 177-010-20 Part No: 177-106-20 Part No: 177-012-20x 1/4” Male Length: 2m x Ø6mm Length:1m x Ø16mm
1/8” Female 1/8” Male Part No: 177-318-20 Part No: 177-944-20 Part No: 177-111-20x 1/4” Male Length: 3m x Ø8mm Length:1m x Ø19mm
1/4” Female 1/4” Male Part No: 177-314-20 Part No: 177-945-20 Part No: 177-110-20x 1/4” Male Length: 3m x Ø8mm Length:1m x Ø22mm
1/2” Female 1/4” Male Part No: 177-338-20 Part No: 177-005-20x 3/8” Male Length: 3m x Ø12mm Length:1m x Ø50mm
3/4” Female 3/4” Female Part No: 177-312-20x 3/4” Female Length: 3m x Ø16mm N/A
Model RA25R 1/4” Male Part No: 177-647-20 Part No: 177-648-20Special Fitting Special Fitting Length: 2m x Ø6mm Length: 1m x Ø16mm
0.11 - 0.15 1/4” 100.15 - 0.20 1/4” 100.19 - 0.25 1/4” 120.22 - 0.30 1/4” 150.26 - 0.35 1/4” 150.37 - 0.50 1/4” 150.63 - 0.85 1/4” 200.67 - 0.90 1/4” 200.82 - 1.10 1/4” 201.12 - 1.50 1/2” 201.50 - 2.00 1/2” 302.20 - 3.00 1/2” 30
Motor PowerkW - Hp Micro Fog Unit Size Drips per Min.
The drip rates shown are approximate settings.If there is too much oil from the exhaust of the machine,the drip rate should be reduced slightly. These drip ratesmay not apply to lube units from other manufacturers.It is easiest to begin with a high drip rate, and reduce to thecorrect setting.
ATA Superflex hoseassemblies.
Hose assemblies completewith silencer for use withRear Exhaust Overhose.
Exhaust Overhose snaps oneasily to rear exhaust tools.
ATA Gear LubricationAll ATA right angle grinders andsanders are fitted with highquality gears. In order tomaxamise the service life of thegears it is necessary to ensurethat they are properly lubricated.ATA tools utilize a unique wicksystem which releases the oilonto the gears when the tool isrunning and reabsorbs the oilwhen the tool is stopped. Wheretools are in constant use the oilshould be replenished dailythrough the oil screw fitted in theangle head of the tool. ATArecommends the use of ATAGearlube or any high quality68 cSt gear oil.Failure to lubricate gearswill void all warranties.
ATA Motor LubricationATA recommends the use ofATALUBE air motor oil or otherhigh quality 10cSt oil all vanetype motors when using ATAMicro-Fog Lubricators. The oildrip rate can be set as shown inthe table, remember that only10% of the drip is actuallydelivered to the air supply, theremainder is returned to themain oil reservoir.Failure to properly lubricate avane motor will void allwarranties.
Note: With Turbine motors suchas model ST 100, lubrication oilshould NOTbe used.
2 litre container ofATA Motor Lube.Part No: ATALUBE-2L
1 litre container of ATAGear Lube with BanjoOiler.Part No: GEARLUBE-1L
27