77662259 ccna 1 practice final exam v4

CCNA Exam Answers, CCNA Final Exam Answers, CCNA Module Answers, CCNA Chapter Answers,CCNA Test Answers, CCNA Questions and Answers, CCNA 1 Answers, CCNA 2 Answers, CCNA 3Answers, CCNA 4 Answers, CCNA v4 Answers

HomeAboutContactVLSM CalculatorCCNA Forums

Posted in CCNA 1 - Network Fundamentals (V4.0) - 23 November 2011 - 2 comments - 8,343 views

1. Which OSI layers offers reliable, connection-oriented data communication services?

application

presentation

session

transport

network

2.

Refer to the exhibit. The host was disconnected from switch 2 and connected to switch 1. Whichcombination of IP address, subnet mask, and default gateway should be assigned to this host to allow it tofunction in the network?

IP address: 10.10.9.37 Subnet mask: 255.255.255.240 Default gateway: 10.10.9.35


CCNA 1 Practice Final Exam V4.0 Answers | CCNA Answers - CCN... http://ccnaanswers.com/ccna-1-practice-final-exam-v4-0-answers/

1 von 27 12.12.2011 20:06





3.

Refer to the exhibit. What is the correct destination socket number for a web page request from Host A tothe web server?

00-08-a3-b6-ce-46

198.133.219.25:80

http://www.cisco.com

C 198.133.219.0/24 is directly connected, FastEthernet0/0

4.

Refer to the exhibit. How will data files get retrieved from the server?


2 von 27 12.12.2011 20:06

The client establishes a two-way connection to the server on port 21 for file transfer.

From the perspective of computer A, port 21 is used to signal a push to the server, and port 20 is used tosignal a pull from the server.

There is a connection established to send files from the client to the server and a second connection to getfiles from the server to the client.

Computer A establishes a connection to the server on port 21 for control and uses a second connection onport 20 to download and upload files.

5. Which three IPv4 addresses represent a broadcast for a subnet? (Choose three.)

172.16.4.63 /26

172.16.4.129 /26

172.16.4.191 /26

172.16.4.51 /27

172.16.4.95 /27

172.16.4.221 /27

6.

Refer to the exhibit. The PC, the routing table of which is displayed, is configured correctly. To whichnetwork device or interface does the IP address 192.168.1.254 belong?

PC

Switch

router interface fa0/0


3 von 27 12.12.2011 20:06

router interface fa0/1

7. How does the transport layer allow a host to maintain multiple, simultaneous communication streamsacross different applications?

It uses error control mechanisms.

It uses a connectionless protocol only for multiple simultaneous transmissions.

It uses multiple Layer 2 source addresses.

It uses multiple ports.

8.

Refer to the exhibit. The NAT functionality of the router is enabled to provide Internet access to the PC.However, the PC is still unable to access the Internet. Which IP address should be changed to209.165.201.1 to enable the PC to access the Internet?

192.168.1.191

192.168.1.101

192.168.1.1

192.168.1.254

9.


4 von 27 12.12.2011 20:06

Refer to the exhibit. A technician uses the nslookup command on the PC and views the output that isdisplayed in the exhibit. What is the IP address of the primary domain name server used by the host?

10.10.10.32

192.168.1.5

192.168.1.99

192.168.2.100

10.

Refer to the exhibit. Host X is unable to communicate with host Y. Which command can be run at host Xto determine which intermediary device is responsible for this failure?

telnet 192.168.1.1

ping 192.168.1.1


5 von 27 12.12.2011 20:06

ftp 192.168.1.1

tracert 192.168.1.1

11. In a Cisco IOS device, where is the startup-configuration file stored?

Flash

NVRAM

RAM

ROM

12. A host is transmitting a video over the network. How does the transport layer allow this host to usemultiple applications to transmit other data at the same time as the video transmission?

It uses error control mechanisms.

It uses a connectionless protocol only for multiple simultaneous transmissions.

It uses multiple Layer 2 source addresses.

It uses multiple port numbers.

13.

Refer to the exhibit. Which logical topology describes the exhibited network?

star

ring

point-to-point


6 von 27 12.12.2011 20:06

multi-access

14. A user types the enable command. What task can be performed at the privileged EXEC mode?

Configure the device.

Configure individual interfaces.

Configure individual terminal lines.

Issue show and debug commands.

15. Which type of media is immune to EMI and RFI? (Choose two.)

10 Base-T

10 Base-2

10 Base-5

100 Base-FX

100 Base TX

1000 Base LX

16.

Refer to the exhibit. The network administrator remotely accesses the CLI of RouterB from PC1 using asecure connection. Which statement is true about this connection?

The Telnet server process is running on PC1.

Only the exchange of the Telnet username and password is encrypted.

The GET request is sent to RouterA to retrieve data.

The SSH service is used to connect PC1 to RouterB.


7 von 27 12.12.2011 20:06

17. Which three addresses belong to the category of private IP addresses? (Choose three.)

10.0.0.1

127.0.0.1

150.0.0.1

172.16.0.1

192.168.0.1

200.100.50.1

18.

Refer to the exhibit. On the basis of the IP configuration that is shown, what is the reason that Host A andHost B are unable to communicate outside the local network?

Host A was assigned a network address.

Host B was assigned a multicast address.

Host A and Host B belong to different networks.

The gateway address was assigned a broadcast address.

19. Which three statements are true about network layer addressing? (Choose three.)

It uniquely identifies each host.

It assists in forwarding packets across internetworks.

It uses a logical 32-bit IPv4 address.

It is not a configurable address.


8 von 27 12.12.2011 20:06

It is a physical address.

It identifies the host from the first part of the address.

20. Which device should be used for routing a packet to a remote network?

access switch

DHCP server

hub

router

21.

Refer to the exhibit. What is required on host A for a network technician to create the initial configurationon Router1?

an FTP client

a Telnet client

a terminal emulation program

a web browser

22. As network administrator, what is the subnet mask that allows 510 hosts given the IP address


9 von 27 12.12.2011 20:06

172.30.0.0?

255.255.0.0

255.255.248.0

255.255.252.0

255.255.254.0

255.255.255.0

255.255.255.128

23.

Refer to the exhibit. The headers added at each layer are shown. Which layer adds the destination andsource process numbers to ensure that data is delivered to the correct application?

physical layer

data link layer

network layer

transport layer

24. What is the result of using the clock rate 56000 command at the serial interface of the router?

The interface is configured as a DCE device.

The interface timers are cleared.

The FastEthernet interface is made to emulate a serial interface by assigning it a timing signal.

The IP address for the serial interface is configured.

25.


10 von 27 12.12.2011 20:06

Refer to the exhibit. Host A uses router A as its default gateway. If host A sends an ICMP echo request to172.16.10.0, what ICMP response will host A receive.

echo reply

source quench

route redirection

destination unreachable

26.

Refer to the exhibit. A host is using NAT to connect to the Internet. Which three IP addresses enable thisconnection? (Choose three.)

10.1.1.63

10.1.1.37

10.1.1.39


11 von 27 12.12.2011 20:06

10.1.1.32

10.1.1.60

10.1.1.2

27. Which OSI layer uses the header information to reassemble the data segments into streams?

application layer

network layer

presentation layer

session layer

transport layer

28.

Refer to the exhibit. The diagram represents the process of sending email between clients. Select the listbelow that correctly identifies the component or protocol used at each numbered stage of the diagram.

1.MUA 2.MDA 3.MTA 4.SMTP 5.MTA 6.POP 7.MDA 8.MUA

1.MUA 2.POP 3.MDA 4.SMTP 5.MTA 6.MDA 7.SMTP 8.MUA

1.MUA 2.POP 3.SMTP 4.MDA 5.MTA 6.SMTP 7.POP 8.MUA

1.MDA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MUA 7.POP 8.MDA

1.MUA 2.SMTP 3.MTA 4.SMTP 5.MTA 6.MDA 7.POP 8.MUA

29. Which three statements characterize the transport layer protocols? (Choose three.)

TCP and UDP port numbers are used by application layer protocols.


12 von 27 12.12.2011 20:06

TCP uses port numbers to provide reliable transportation of IP packets.

UDP uses windowing and acknowledgments for reliable transfer of data.

TCP uses windowing and sequencing to provide reliable transfer of data.

TCP is a connection-oriented protocol. UDP is a connectionless protocol.

30.

Examine the graphic with current configurations. Host A in the Clerical office failed and was replaced.Although a ping to 127.0.0.1 was successful, the replacement computer cannot access the companynetwork. With proxy ARP disabled on the Fa0/0 interface of the New York router, what is the likely causeof the problem?

network card failure

network cables unplugged

IP address incorrectly entered

subnet mask incorrectly entered

31. Which fiber connector supports full-duplex Ethernet?


13 von 27 12.12.2011 20:06

32. What purpose does a hostname serve on a router?

uniquely identifies a router on the internet

used by routing protocols to identify peer routers

provides device identification to users logging on remotely

determines the hosts that are allowed to connect to the device

33. Which range of port numbers is assigned dynamically to client applications when initiating aconnection to the server?

0 to 255

0 to 1023

1024 to 49151

greater than 65535

34.

Refer to the exhibit. A network technician wants to connect host A to the console of a Cisco switch toinitialize the configuration. What type of cable is required for this connection?

straight-through cable


14 von 27 12.12.2011 20:06

crossover cable

rollover cable

serial cable

35.

Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and aLayer 3 address will enable this access from host A?

Destination MAC: 0030.8596.DE83 Default gateway: 209.165.202.130

Destination MAC: 0030.8596.DE82 Default gateway: 172.16.9.2

Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1

Destination MAC: 0030.8517.44C4 Default gateway: 209.165.202.130

36.

Refer to the exhibit. Each media link is labeled. What type of cable should be used to connect the differentdevices?

Connection 1 – rollover cable Connection 2 – straight-through cable Connection 3 – crossover cable

Connection 1 – straight-through cable Connection 2 – crossover cable Connection 3 – rollover cable

Connection 1 – crossover cable Connection 2 – rollover cable Connection 3 – straight-through cable

Connection 1 – crossover cable Connection 2 – straight-through cable Connection 3 – rollover cable


15 von 27 12.12.2011 20:06

Connection 1 – straight-through cable Connection 2 – straight-through cable Connection 3 – straight-through cable

37. The Layer 4 header contains which type of information to aid in the delivery of data?

service port number

host logical address

device physical address

virtual connection identifier

38.

Refer to the exhibit. The network containing router B is experiencing problems. A network associate hasisolated the issue in this network to router B. What action can be preformed to correct the network issue?

issue the clock rate command on interface Serial 0/0/0

issue the description command on interface Serial 0/0/1

issue the ip address command on interface FastEthernet 0/0

issue the no shutdown command on interface FastEthernet 0/1

39.

Refer to the exhibit. Which two statements describe the information that is represented in the header?(Choose two.)


16 von 27 12.12.2011 20:06

This is a server response.

The UDP protocol is being used.

The destination port indicates a Telnet session.

The return segment will contain a source port of 23.

The next session originated from the client of this session will use the source port number 13358.

40. What information is used at each hop to determine where the packet will be forwarded next?

the IP packet header

the incoming interface

the transport layer PDU

the source MAC address

41.

Refer to the exhibit. Cable 1 and cable 2 have the ends wired for specific physical layer requirements. Thetable lists each segment by number and the cable which has been installed by the network technicianbetween the network components on that segment. From the data given, which segments have the correctcable installed? (Choose three.)

segment1


17 von 27 12.12.2011 20:06

segment2

segment3

segment4

segment5

42. An administrator has made changes to a device. The changes did not have the desired effect. What canthe administrator do to restore the configuration saved in NVRAM?

Issue the erase flash command.

Issue the reload command and respond no to the prompt that follows.

Issue the erase start-up config command.

Issue the copy running-config start-up config command.

43.

Refer to the exhibit. Which logical topology describes the exhibited network?

star

ring

point-to-point

multi-access

44. A network administrator wants to restrict access to the router privileged EXEC mode. Which password


18 von 27 12.12.2011 20:06

should the administrator use?

enable

aux

console

VTY

45.

Refer to the exhibit. Which set of devices contains only intermediary devices?

A, B, D, G

A, B, E, F

C, D, G, I

G, H, I, J

46. While configuring a router, a network technician wants to name the router. Which prompt should thetechnician see when entering the hostname command?

Router>

Router#

Router(config)#

Router(config-line)#


19 von 27 12.12.2011 20:06

47.

Refer to the exhibit. An administrator on PC1 wants to view some HTML code from a web page housedon the web server. Which client application will allow this request to be started?


20 von 27 12.12.2011 20:06

48.

Refer to the exhibit. A technician has been asked to test connectivity from PC1 to a remote network.Which action will indicate if there is remote connectivity?


21 von 27 12.12.2011 20:06

49.

Refer to the exhibit. A web browser running on host PC1 sends a request for a web page to the web serverwith an IP address 192.168.1.254/24. What sequence of steps will follow in order to establish the sessionbefore data can be exchanged?

The session will be initiated using UDP. No additional acknowledgment will be required to establish thesession.

The session will be initiated using TCP. No additional acknowledgment will be required to establish thesession.

The session will be initiated using UDP. The returned web page will serve as an acknowledgment forsession establishment.

The session will be initiated using TCP. A three-way handshake must be successfully completed before thesession is established.


22 von 27 12.12.2011 20:06

50. Because of a security violation, the router password must be changed. What information can belearned from these configuration entries? (Choose two.)Router(config)# line vty 0 4Router(config-line)# password arj15Router(config-line)# login

This configuration allows users to connect by using a modem.

Users must specify which line, 0 or 4, they wish to connect to when making a connection.

This configuration allows users to connect to the router via the use of the telnet command.

This configuration allows five users to make simultaneous connections to this router.

The configured password is automatically encrypted on the router.

examine the graphic with current configurations host a in the clerical office failed and was replacedalthough a ping to 127 0 0 1 was successful the replacement computer cannot access the company networkwith proxy arp disabled on the fa0/0 interface of , ccna 1 chapter 10 practice test, final exam practice ccna1, enetwork practice final exam chapter 1answers, ccna 1 chapter 11 v4 0 answers ccna answers - ccnaexam - ccna exams, refer to the exhibit a technician has been asked to test connectivity from pc1 to aremote, ccna final exam module 1 answer v4, cisco ccna 1 practice final v4 0 answers, refer to the exhibitwhat is the correct destination socket number for a web page request from host a to the web server?,ccna-1 final exam answer, ccna final exam diagrams, examine the graphic with current configurations,refer to the exhibit a technician has been asked to test connectivity, ccna cisco practice final exam answer,ccna networking final test practise, final exam ccna 1 with answers, how is ccna 1 final exam,ccnaanswers com/ccna-2-final-exam-v4-0-answers/c, ccna1 final exam answers complete nov 2011,enetwork practice final exam v4, ccna 2 v4 practice final exam, cnaa final exam, ccna 1 practice final v4 02011, ccna 1 exam networking practice final exam, practice exam ccna 1 4 0, ccna 1 v 4 practice finalexam, ccna 1 v4 0 practice final, practica final ccna 1, network fundamentals pratice answers, ccnaanswers subnet mask, layer 4 header, ccna 1 v4 exam without connection, ip address: 10 10 9 37 subnetmask: 255 255 255 224 default gateway: 10 10 9 35, ccna enetwork practice final exam v4 0 answer, ccnav4 1 final answer, cisco 1 november 2011 ccna final exam network fundamentals version 4 0 answer, cisco1 final test answers v4 0, ccnaanswers ccna1 practice final, ccna3 prefinal, enetwork chapter final exampractice, ccna1 practice final exam v 4, enetwork final exam november 2011, ccna1 final exam practiceV4 0, ccna1 exam practice 2011, cisco network fundamentals 4 0 final chapter exam november 2011,examen ccna 1 4 0 practice, examen pre final ccna 1, ccna practive final, examen pre final ccna1, cisco v4practice final exam, ccna network fundamentals final exam2012 answer, ciso answers, session layer,prefinal de ccna 1 v4, ccna 1 enetwork final exam 2012, answers-ccna cisco 2011, ccna 1 final exam v0 4answer, v41 practice final exam 1-10, ccna 1 final exam answers 2011 november, the new ccna, ccn 3 finalexam answers 2011, CCNA 1 - Network Fundamentals (V4 0) - 23 November 2011, ccna 1 all chapters v40 final exam answers 2011, ccna 1 final exam which two programs, refer exhibit nslookup primary domainname, ccna 1 final exam answers 2011 novemeber, 2012 CCNA 1, practice exam for ccna 1, ccna 1module practice exam answers, exam tp ccna 1 version4, enetwork practice final exam v4 2011, enetworkpractice final exam v4 1, topologies point à point, ciscoaswers com, what is ccna v4 0, enetwork v4 0practice final exam answers 2011, exam ccna 1 final v4 0, cisco v4 ccna 1 final exam answer 100% 2011,exam final ccna 1 4 0, cisco routers 1 final exam practice, What is required on host A for a networktechnician to create the initial configuration on Router1?, exam the graphic with current configuarationhost a in the clericaloffice fail and was replaced, examen ccna 1 v4 novembre, examen final ccna 1 version4 noviembre 2011, enetwork practice final exam ccna 1 versión 4 0, enetwork chapter 9 2011 answers,


23 von 27 12.12.2011 20:06

with proxy arp disabled on the fa0/0 interface of, what purpose does a hostname serve on a router? ccna,ENetwork Chapter 2 version 4, Which logical topology describes the exhibited network?, enetworkanswers to final, which logical topology describes the exhibited network? star ring, enetwork 4 practicefinal exam, CNNA 1 enetwork practice final exam V 4 answers 2011, what purpose does a hostname serveon a router, enetwork final exam - network fundamentals (version 4 0) final, xhibit the network containingrouter b is experiencing problems a network associate has isolated the issue in this network to router bwhat action can be pre, enetwork practice final exam ccna 1 2011 v4, enetwork practice final exam 4 0respuestas ccna 1, enetwork practice final exam 2011 pdf

Tags: CCNA 1, CCNA 1 Practice Final Exam 2011, CCNA 1 Practice Final Exam 2012, ENetwork,ENetwork Practice Final Exam, ENetwork Practice Final Exam 2011, ENetwork Practice Final Exam2012, Network Fundamentals, Network Fundamentals Practice Final Exam, Practice

2 Responses - Add Yours+

kelthuzad says:December 4, 2011 at 2:40 pm

Some corrections:

Q7: right answer:It uses multiple ports.

Q13: right answer:point-to-point

Q43: right answer:ring

Reply

Anon says:December 10, 2011 at 1:10 pm

Question 7 is correct.

Reply

1.

Leave a Reply

Name (required)

Mail (will not be published) (required)

Website


24 von 27 12.12.2011 20:06

Categories

CCNA 1 – Network Fundamentals (V4.0) (14)CCNA 2 – Routing Protocols and Concepts (V4.0) (12)CCNA 3 – LAN Switching and Wireless (V4.0) (8)CCNA 4 – Accessing the WAN (V4.0) (12)CCNA 1 – Networking Basics (V3.1) (13)CCNA 2 – Router and Routing Basics (V3.1) (13)CCNA 3 – Switching Basics and Intermediate Routing (V3.1) (10)CCNA 4 – WAN Technologies (V3.1) (8)

Tags

CCNA 1 Module 1 Answers 2010 CCNA 1 Module 2 Answers 2010 CCNA 1 Practice Final Exam Answers

CCNA 4 Final CCNA 4 Final Exam V4.0 Answers 2011 CCNA 4

Final Exam V4.0 Answers 2012 CCNA 4 Practice Final Exam Answers CCNA 2011 CCNA 2012 CCNAAnswers 2011 CCNA Answers 2012 CCNA Exam 2011 CCNA Exam 2012 CCNA Exploration 1 Chapter 1 Answers CCNA

Exploration 1 Chapter 2 Answers CCNA Exploration 3 Chapter 1 Answers CCNA Final 2011 CCNA Final 2012

CCNA Module 1 Answers CCNA Module 3 Answers CCNAModule 4 Answers CCNA Module 5 Answers CCNA Module 6 Answers CCNA Module7 Answers CCNA Module 8 Answers CCNA Module 9 Answers CCNA Module 10 Answers CCNA Module

11 Answers Cisco CCNA 1 Final Exam Answers Cisco CCNA 4 Final Exam Answers Exam 2011 Exam

2012 Final Exam LAN Switching and Wireless Chapter 1 Answers LAN Switching and Wireless Final Exam Answers Network

Fundamentals Chapter 1 Answers Network Fundamentals Chapter 2 Answers Network Fundamentals Final Exam AnswersPracticeDownload CCNA PDF File CCNA Tools CCNA Updated 2011

Most Views

CCNA 1 Final Exam Answers 2011 - 263,069 viewsCCNA 3 Final Exam V4.0 Answers - 166,745 viewsCCNA 4 Final Exam V4.0 Answers - 161,195 viewsCCNA 1 Final Exam V4.0 Answers - 151,069 viewsCCNA 1 Chapter 2 V4.0 Answers - 112,518 viewsCCNA 1 Chapter 3 V4.0 Answers - 102,447 views


25 von 27 12.12.2011 20:06

CCNA 1 Chapter 11 V4.0 Answers - 99,574 viewsCCNA 2 Chapter 1 V4.0 Answers - 96,933 viewsCCNA 1 Chapter 5 V4.0 Answers - 91,431 viewsCCNA 2 Final Exam V4.0 Answers - 87,119 views

Popular Tags

ccna answers, Refer to the exhibit Interface Fa0/0 on router A is generating excessive broadcast trafficWhich LAN segments will affected by the excessive broadcasts?, ccnaanswers, ccna answer, ccna 1 finalexam, A network technician notes that ports Fa0/9 through Fa0/12 on a switch have been assigned toVLAN 40 VLAN 40 however was improperly named and the technician deletes it What happens to theports that were assigned to VLAN 40?, ccnaanswers com, Which two programs can be used to accomplishterminal emulation for configuring a router from the CLI through the console port? (Choose two ), Atechnician makes several changes to the running configuration on a router but the desired results are notachieved The technician issues the reload command What action will be taken by the router?, ccna 1 finalexam answers, ccna 1 final exam answers 2011, Refer to the exhibit After the commands are enteredwhich password will be required to establish a Telnet session with the router?, Refer to the exhibit Whichcommand should be issued to configure the address of the router interface that is attached to thiscomputer?, Refer to the exhibit A technician uses the show ip route command to troubleshoot a networkand receives the output that is shown What is indicated by the route that is labeled R*?, An administratormakes changes to the default configuration of a router and saves them to NVRAM After testing it isdiscovered that the configurations did not have the desired effect and must be removed What steps must betaken to remove the changes and r, ccna1 final exam answers 2011, A network administrator enters theenable command at the Switch> prompt of a new switch What mode will the switch enter?, Refer to theexhibit A network administrator needs to download a previously saved configuration file from the TFTPserver to Switch1 Which command will accomplish this task?, Refer to the exhibit A networkadministrator tries to test the connectivity between routers R1 and R2 but the attempt to ping isunsuccessful Based on the show ip interface brief command outputs what could be the possible cause ofthe problem?, ccna1 final exam, ccna 4 final exam, ccna 2 chapter 2 answers, ccna 3 chapter 1, Refer tothe exhibit The broadcast traffic from PC1 is consuming bandwidth on the interswitch trunks What shouldbe done to prevent this from happening?, ccna 2 chapter 1 answers, ccna 3 final exam, A networkadministrator issued the erase nvram: command on a switch What will be the outcome of the command?,Which default EIGRP configuration must be modified to allow an EIGRP router to advertise subnets thatare configured with VLSM?, ccna 4 chapter 3, Refer to the exhibit What needs to be done to allow thesetwo routers to connect successfully?, CCNA 4 chapter 1, ccna 2 chapter 3 answers, CCNA final examanswers, During the initial configuration of a router the administrator enters the command no serviceconfig How will the router behave as a a result of this command?, ccna 3 chapter 2, ccna 1 chapter 6answers, ccna 2 chapter 1, A network administrator is tasked with connecting two workgroups that areconfigured to use different subnets Which device should be selected to allow connectivity between userson the two networks?, Refer to the exhibit Host A is able to access resources on the local LAN but isunable to access any resources on the Internet What is the likely cause of this problem?, ccna 2 chapter 6,ccna 2 chapter 10, ccna 2 chapter 11, ccna 2 chapter 7, ccna 2 chapter 8, ccna 4 chapter 4, ccna 2 chapter 4answers, ccna 1 chapter 2 answers, ccna 1 final exam 2011, Refer to the exhibit Which two switchinterfaces would be RSTP edge ports? (Choose two ), ccna 1 chapter 9 answers, CCNA 2 Chapter 2, ccnachapter 5 answers, ccna 3 final exam answers 2011, CCNA1 final exam 2011, ccna 2 chapter 3, ccna 2chapter 6 answers, ccna 3 chapter 4, ccna 3 chapter 7, ccna 1 chapter 7 answers, ccna 2 chapter 5, ccna 4chapter 2, ccna 2 chapter 5 answers, ccna 1 chapter 10 answers, Refer to the exhibit A network technicianhas made several changes to R1 since the configuration has last been saved The modified configurationdid not produce the desired changes The technician wants to store a backup copy of the savedconfiguration on a, ccna chapter 6 answers, ccna chapter 8 answers, CCNA 2 chapter 9, ccna 1 chapter 11answers, ccna chapter 2 answers, ccna 1 chapter 4 answers, ccna 2 chapter 4, ccna 1 chapter 6, ccna 4


26 von 27 12.12.2011 20:06

chapter 5, ccna 2 chapter 7 answers, ccna 4 chapter 7, ccna 2 chapter 9 answers, ccna 2 chapter 11answers, ccna chapter 9 answers, ccna 1 chapter 10, ccna 1 chapter 8 answers, ccna 1 chapter 11, ccna 3chapter 5, ccna chapter 4 answers, ccna 1 chapter 7, CCNA 1 Chapter 8, CCNA 3 chapter 3, ccna 4 chapter6, ccna 2 chapter 10 answers, ccna 3 chapter 6, A company is deciding which WAN connection type itshould implement between its main office and branch offices The company wants to use a cost-effectiveservice that provides virtual circuits between each office The company also wants to be able to transm,ccna 3 chapter 3 answers, ccna 2 chapter 8 answers, ccna 1 chapter 9, ccna 1 chapter 5 answers, ccna 4chapter 8, CCNA 1 chapter 3 answers, ccna 1 chapter 5, CCNA chapter 3 answers, ccna chapter 11answers, Refer to the exhibit What can be determined from the configuration of this wireless device?

Recent Posts

CCNA 4 Practice Final Exam V4.0 AnswersCCNA 1 Practice Final Exam V4.0 AnswersCCNA 4 Final ExamCCNA 4 Final Exam Answers 2011CCNA 1 Final Exam Answers 2011

Recent Comments

jeffrey on CCNA 2 Chapter 7 V4.0 AnswersAnon on CCNA 1 Practice Final Exam V4.0 AnswersBoyet on CCNA 2 Chapter 2 V4.0 AnswersLoi on CCNA 4 Practice Final Exam V4.0 Answersyk on CCNA 4 Practice Final Exam V4.0 Answers

Directories

Rate My Blog

Copyright © 2011 CCNA Answers – CCNA Exam – CCNA Exams. Entries (RSS).


27 von 27 12.12.2011 20:06

77662259 ccna 1 practice final exam v4

Documents