ccna 1 final exam v4 answers 2011

CCNA Answers – CCNA Exam – CCNA ExamsCCNA Exam Answers, CCNA Final Exam Answers, CCNA Module Answers, CCNA Chapter Answers,CCNA Test Answers, CCNA Questions and Answers, CCNA 1 Answers, CCNA 2 Answers, CCNA 3Answers, CCNA 4 Answers, CCNA v4 Answers

HomeAboutContactVLSM CalculatorCCNA Forums

CCNA 1 Final Exam Answers 2011

Posted in CCNA 1 - Network Fundamentals (V4.0) - 9 February 2011 - 48 comments - 182,369 views

1. Due to a security violation, the router passwords must be changed. What information can be learned fromthe following configuration entries? (Choose two.)Router(config)# line vty 0 3Router(config-line)# password c13c0Router(config-line)# login

The entries specify three Telnet lines for remote access.

The entries specify four Telnet lines for remote access.

The entries set the console and Telnet password to "c13c0".

Telnet access will be denied because the Telnet configuration is incomplete.

Access will be permitted for Telnet using "c13c0" as the password.

2. Which two actions could be taken by a router if a specific match is not made to a route in the routing table?(Choose two.)

The packet will be discarded.

The packet will be sent back to the source.

The packet will be flooded out all interfaces.

Neighboring routers are polled to find the best path.

The packet will be forwarded to a default route if one is present.

CCNA 1 Final Exam Answers 2011 | CCNA Answers - CCNA Exam - C... http://ccnaanswers.com/ccna-1-final-exam-answers-2011/

1 of 38 10/11/2011 8:40 PM

3.

Refer to the exhibit. The network administrator remotely accesses the CLI of RouterB from PC1 using asecure connection. Which statement is true about this connection?

The Telnet server process is running on PC1.

Only the exchange of the Telnet username and password is encrypted.

The GET request is sent to RouterA to retrieve data.

The SSH service is used to connect PC1 to RouterB.

4.

Refer to the exhibit. What three statements are true about the IP configuration that is shown? (Choose three.)

The prefix of the subnet mask is /26.

The network on which this computer resides can have 30 hosts.

The computer is unable to communicate outside of the local network.

The address that is assigned to the computer represents private addressing.

The IP address that is assigned to the computer is routable on the Internet.

The IP address that is assigned as the default gateway is valid for this host.


2 of 38 10/11/2011 8:40 PM

5. What information can be gathered by using the command netstat?

the default gateway

the routing protocol

active TCP connections

the locally configured subnet mask

6.

Refer to the exhibit. The nslookup command that is shown was issued on a Windows PC host. What does the10.32.5.74 address represent?

the IP address of the host

the default gateway for the host

the primary DNS server for the host

the home page address for the host

7.

Refer to the exhibit. A network administrator remotely accesses the CLI of RouterB from PC1 using Telnet.Which statement is true about this connection?

The data is automatically encrypted.

A Telnet server process is running on PC1.

The connection is made through a VTY session on the router.


3 of 38 10/11/2011 8:40 PM

A GET request was sent to RouterB to retrieve data during this session.

8. Which three addresses are private IP addresses? (Choose three.)

10.0.0.1

46.1.1.88

172.31.31.10

172.32.16.10

192.168.8.8

9.

Refer to the exhibit. Host C is able to ping 127.0.0.1 successfully, but is unable to communicate with hosts Aand B in the organization. What is the likely cause of the problem?

Hosts A and B are not on the same subnet as host C.

The IP addresses on the router serial interfaces are wrong.

The subnet mask on host C is improperly configured.

The FastEthernet interface fa0/0 of router 1 is wrongly configured.

10. Which OSI layer addressing is required to route packets between two networks?

Layer 1

Layer 2


4 of 38 10/11/2011 8:40 PM

Layer 3

Layer 4

11. What is the effect of using the Router# copy running-config startup-config command on a router?

The contents of ROM will change.

The contents of RAM will change.

The contents of NVRAM will change.

The contents of flash will change.

12. A PC can not connect to any remote websites, ping its default gateway, or ping a printer that isfunctioning properly on the local network segment. Which action will verify that the TCP/IP stack isfunctioning correctly on this PC?

Use the ipconfig /all command at the host’s command prompt.

Use the ping 127.0.0.1 command at the command prompt.

Use the traceroute command at the command prompt to identify any failures on the path to the gateway.

Use FTP to check for connectivity to remote sites.

Download a troubleshooting tool from the PC manufacturer’s website.

13. Which subnet mask will allow 2040 hosts per subnet on the IP network 10.0.0.0?

255.255.0.0

255.255.254.0

255.255.252.0

255.255.248.0

255.255.240.0

255.255.255.128

14.


5 of 38 10/11/2011 8:40 PM

Refer to the exhibit. When computer A sends a frame to computer D, what computers receive the frame?

only computer D

only computer A and computer D

only computer B, computer C, and computer D

all computers

15.

Refer to the exhibit. While configuring a network, a technician wired each end of a Category 5e cable asshown. Which two statements are true about this setup? (Choose two.)

The cable is suitable for connecting a switch to a router Ethernet port.

The cable is suitable for connecting dissimilar types of devices.

The cable is unusable and must be rewired.

The cable is terminated in a way that the transmit pin is wired to the receive pin.


6 of 38 10/11/2011 8:40 PM

The cable simulates a point-to-point WAN link.

16.

Refer to the exhibit. Which layered network model is shown in the diagram?

Cisco

IETF

OSI

TCP/IP

17. An administrator makes changes to the default configuration of a router and saves them to NVRAM.After testing, it is discovered that the configurations did not have the desired effect and must be removed.What steps must be taken to remove the changes and return the router to the default configuration?

Reboot the router.

Use no version of the commands that are issued.

Issue the erase startup-config command, and then reboot the router.

Issue the erase running-config command, and then reboot the router.

18.


7 of 38 10/11/2011 8:40 PM

Refer to the exhibit. Host A and B are unable to communicate with each other. What is the reason for this?

Host A is assigned a network address.

Host B is assigned a multicast address.

Host A and host B belong to different networks.

The gateway addresses are network addresses.

19.

Refer to the exhibit. A network technician has made several changes to R1 since the configuration has lastbeen saved. The modified configuration did not produce the desired changes. The technician wants to store abackup copy of the saved configuration on a TFTP server before reloading. Which action will cause theunmodified data to be saved on the TFTP server?


8 of 38 10/11/2011 8:40 PM

20. What can the user do from the command prompt, Router(config-line)# ?

Configure one of the network interfaces.

Configure one of the physical or virtual lines.

Verify the running configuration on the device.

Configure the parameters for one of the routing protocols.

21.

Refer to the exhibit. A PC is connected to a network. Which action will verify that the PC can communicatewith its default gateway?


9 of 38 10/11/2011 8:40 PM

Use the ping 127.0.0.1 command.

Use the ipconfig command.

Use the ipconfig/all command.

Use the ping 10.0.0.254 command.

22.

Refer to the exhibit. The serial interface of the router was configured with the use of the commands that areshown. The router cannot ping the router that is directly connected to interface serial 0/0/0. What should thenetwork technician do to solve this problem?

Configure the description at interface serial 0/0/0.

Configure an IP address on interface serial 0/0/0.

Remove the no shutdown command at interface serial 0/0/0

Reboot the router.

23. A technician is asked to secure the privileged EXEC mode of a switch by requiring a password. Whichtype of password would require this login and be considered the most secure?

console

enable

enable secret

VTY

24. What are two purposes for configuring a banner on a router? (Choose two.)

to announce system downtime

to prevent unauthorized access to the router

to provide a description of interface connections

to assist in legal prosecution for unauthorized access

to provide a welcome message to users who access the router


10 of 38 10/11/2011 8:40 PM

25.

Refer to the exhibit. A PC is communicating with another PC on a remote network. The two networks areconnected by three routers. Which action will help to identify the path between the hosts?

Use the ipconfig command at the host.

Use the ipconfig/all command at the destination.

Use the tracert command at the host.

Use the ping command at the destination.

26.

Refer to the exhibit. Which list refers only to end devices?

D,E,F,G


11 of 38 10/11/2011 8:40 PM

A,H,B,C

A,D,E,F

A,D,E,G

27. When must a router serial interface be configured with the clock rate command?

when the interface is functioning as a DTE device

when the interface timers have been cleared

when the connected DTE device is shut down

when the interface is functioning as a DCE device

28. Which table accurately associates the RFC 1918 private IP addresses with the correct network mask?

29.


12 of 38 10/11/2011 8:40 PM

Refer to the exhibit. Which two layers of the OSI model describe the same functions as the transport andinternet layers of the TCP/IP model? (Choose two.)

application layer

presentation layer

session layer

transport layer

network layer

data link layer

physical layer

30. What happens when a host station receives a frame that contains its own MAC address in the destinationfield?

The Layer 2 information is removed and the frame is pushed up to Layer 3.

The host station will copy the information to its buffers and send it back out.

The frame originated from the host and will be ignored.

The Layer 3 information is added to the frame.

31.


13 of 38 10/11/2011 8:40 PM

Refer to the exhibit. Host A is configured with the correct IP address for the default gateway of the router R1FastEthernet0/1 interface. How will a packet that is sent from host A to host B be handled by the devices onthe network?

R1 will drop the packet because R1 does not have a specific route in its routing table to the 10.1.1.0/24network.

R1 will forward the packet to its default gateway, the next hop router R2. R2 will forward the packet to thedirectly connected network 10.1.1.0/24.

R1 will forward the packet to its default gateway, the next hop router R2. R2 will drop the packet because itdoes not have a default route to network 10.1.1.0/24.

R1 will forward the packet to its default gateway, the next hop router R2. R2 will drop the packet because itdoes not have a route that is learned by a routing protocol to network 10.1.1.0/24.

32. What type of network is maintained if a server takes no dedicated role in the network?

mainframe

client/server

peer-to-peer

centralized

33. In a network design project, a network designer needs to select a device to provide collision freeconnections to 40 hosts on the LAN. Which device should be selected?

hub

router

switch


14 of 38 10/11/2011 8:40 PM

firewall

34. Which TCP/IP model layer creates additional overhead on network resources due to acknowledgments,tracking, and retransmission of data?

internet

transport

application

network access

35. How many host addresses may be assigned when using the 128.107.0.0 network address with a subnetmask of 255.255.248.0?

30

256

2046

2048

4094

4096

36. Which service is used when the nslookup command is issued on a computer?

FTP

DNS

DHCP

Telnet

37. Which process provides the means to send and receive data when running multiple applications at thesame time on a computer?

interleaving

sequencing

segmentation


15 of 38 10/11/2011 8:40 PM

acknowledgement

38. Which three IPv4 addresses represent valid host addresses for a subnet? (Choose three.)

10.1.12.79/28

10.1.12.113/28

10.1.12.32/28

10.1.11.5/27

10.1.11.97/27

10.1.11.128/27

39. What is the consequence of issuing the erase startup-config command in privileged EXEC mode on aCisco router?

Data stored in RAM will be removed.

Data stored in NVRAM will be erased.

Information in flash memory will be removed.

Flags in the configuration register will be set to 0.

Both the startup-config and the running-config will be erased.

40.

Refer to the exhibit. A network technician is trying to determine the correct IP address configuration for HostA. What is a valid configuration for Host A?

IP address: 192.168.100.19; Subnet Mask: 255.255.255.248; Default Gateway: 192.16.1.2



16 of 38 10/11/2011 8:40 PM





41. What is the Cisco IOS?

system software for Cisco devices

Read Only Memory in Cisco devices

non-volatile storage for device configurations

an initial operating system that is used for boot functions

42. Which router configuration mode will require user authentication if an administrator issues the enablesecret command?

user executive mode

privileged executive mode

global configuration mode

service specific configuration mode

43. Which command or commands will require authentication to access the privileged exec mode?

RTRA(config)# enable secret ciscoRTRA(config)# service password encryption

RTRA(config)# line con 0RTRA(config-line)# loginRTRA(config-line)# password cisco

RTRA(config)# line vty 0 4RTRA(config-line)# loginRTRA(config-line)# password cisco

44. A routing issue has occurred in your internetwork. Which of the following type of devices should beexamined to isolate this error?

access point


17 of 38 10/11/2011 8:40 PM

host

hub

router

switch

45. Which statement is true about Layer 3 addresses?

They are physical addresses.

They are used in routing decisions.

They are only used on local networks.

They are altered each time a packet crosses a router.

46.

Refer to the exhibit. An administrator on PC1 wants to view some HTML code from a web page housed onthe web server. Which client application will allow this request to be started?


18 of 38 10/11/2011 8:40 PM

47. Which OSI layer does IP rely on to determine whether packets have been lost and to requestretransmission?


19 of 38 10/11/2011 8:40 PM

application

presentation

session

transport

48.

Refer to the exhibit. PC1 is unable to access PC2. To troubleshoot this problem, the technician needs toconfirm that the next hop interface is operational. Which default gateway address should the technician pingfrom PC1 to confirm this?

10.0.0.254

192.168.0.249

192.168.0.250

10.0.1.254

49. An administrator is in the middle of entering a lengthy command when suddenly output from the IOSappears stating that an interface has gone down and then up again. Consequently, the command that theadministrator was typing is no longer legible on the terminal. What CLI keystrokes can be entered to return tothe line that the administrator was typing?

Ctrl-D

Ctrl-K

Ctrl-R

Ctrl-Z


20 of 38 10/11/2011 8:40 PM

50. Which option represents a point-to-point logical topology diagram?

51. Which physical component is used to access and perform the initial configuration on a new unconfiguredrouter?


21 of 38 10/11/2011 8:40 PM

52. Which option shows how a router will route packets to a remote network?


22 of 38 10/11/2011 8:40 PM

How many host addresses may be assigned when using the 128 107 0 0 network address with a subnet maskof 255 255 248 0?, Which transport layer process allows for multiple applications to send and receive dataconcurrently on a single computer?, Refer to the exhibit An administrator on PC1 wants to view some HTMLcode from a web page housed on the web server Which client application will allow this request to bestarted?, Which option represents a point-to-point logical topology diagram?, ccna final exam 2011 answers,ccna exploration final exam answers 2011, Which command would a technician use to get a quick summaryof the interfaces of a router?, ccna 1 final exAM 2011 ANSWERS, In a network design project a networkdesigner needs to select a device to provide collision free connections to 40 hosts on the LAN Which deviceshould be selected?, Due to a security violation the router passwords must be changed What information canbe learned from the following configuration entries? (Choose two ), Which process provides the means tosend and receive data when running multiple applications at the same time on a computer?, examen final ccna1 2011, An administrator has configured a switch to use SSH as the means for remote access However thenetwork administrator is also required to temporarily configure the switch to be remotely accessed from ahost that can only run Telnet After the administrator , ccna exams 2011, Which service is used when thenslookup command is issued on a computer?, CCNA 2011 exam, cisco ccna final exam answers 2011, Whichoption represents a point-to-point logical topology diagram, What can the user do from the command promptRouter(config-line)#, How many host addresses may be assigned when using the 128 107 0 0 network addresswith a subnet mask of 255 255 248 0, ccna exam questions and answers 2011, CCNA exam questions 2011,Refer to the exhibit Host A and B are unable to communicate with each other What is the reason for this?,Refer to the exhibit A network administrator remotely accesses the CLI of RouterB from PC1 using TelnetWhich statement is true about this connection?, Which transport layer process allows for multiple applicationsto send and receive data concurrently on a single computer, ccna 1 network fundamentals final exam answers2011, Refer to the exhibit RouterB is configured properly The Ethernet interface Fa0/0 of RouterA isconfigured with the use of the commands that are shown However a ping from the Fa0/0 interface of RouterAto the Fa0/0 interface of RouterB is unsuccessful What, ccna 1 exam answers 2011, ccna exam dates 2011,What information can be gathered by using the command netstat?, ccna exam topics 2011, CCNA-1 finalexam, ccna test answers 2011, final ccna 1 2011, ccna exam schedule 2011, ccna1 final exam answers2011,How many host addresses may be assigned when using the 128 107 0 0 network address with a subnet mask


23 of 38 10/11/2011 8:40 PM

of 255 255 248 0? 30 256 2046 2048 4094 4096, a network technician wants to know which active TCPconnections are open and running on a networked host Which command will accomplish this?, latest ccnaexam 2011, What is the consequence of issuing the erase startup-config command in privileged EXEC modeon a Cisco router, ccna enetwork final exam 2011, cisco enetwork final exam 2011, examen final cisco ccna 12011, ccna 2011 exams, CISCO FINAL, cisco 2 final exam answers 2011, Which physical component is usedto access and perform the initial configuration on a new unconfigured router?, ccna exam pattern 2011,examen final ccna1 2011, An administrator on PC1 wants to view some HTML code from a web page housedon the web server Which client application will allow this request to be started?, ccna exam code 2011, Referto the exhibit A technician has been asked to test connectivity from PC1 to a remote network Which actionwill indicate if there is remote connectivity?, Which service is used when the nslookup command is issued ona computer, Refer to the exhibit Which list refers only to end devices?, How many host addresses may beassigned when using the 128 107 0 0 network address with a subnet mask of 255 255 248 0? 30, Refer to theexhibit A PC is communicating with another PC on a remote network The two networks are connected bythree routers Which action will help to identify the path between the hosts?, what information can begathered by using the command netstat, A network administrator wants to check the routing table on a localhost What command would the administrator use?, ccna final exams 2011, ccna 1 final answer, ccnaexploration 1 network fundamentals – final exam 2011, ccna final exam answer 2011, Which table accuratelyassociates the RFC 1918 private IP addresses with the correct network mask?, ccna1 examen final 2011, lanswitching and wireless final exam answers 2011, ccna 1 final exam answers 2011 pdf, ccna questions 2011,enetwork final exam answer, final exam 2011, Refer to the exhibit Host A is unable to reach host B on theremote network A technician attempted to ping the local gateway and the ping was successful To verify thehost configuration the technician issued the ipconfig command What is the likely cause, what can the user dofrom the command prompt router config-line, ccna exam 2011 dates, ccna exam fees 2011, ccna 2011answers, ccna exam forum 2011, Refer to the exhibit A technician uses the nslookup command on the PC andviews the output that is displayed in the exhibit What is the IP address of the primary domain name serverused by the host?, Refer to the exhibit An administrator on PC1 wants to view some HTML code from a webpage housed on the web server Which client application will allow this request to be started, ccna answer2011, ccna discovery 1 final exam 2011, ccnaanswers com/ccna-1-final-exam-answers-2011, how many hostaddresses may be assigned when using, Refer to the exhibit PC1 is unable to access PC2 To troubleshoot thisproblem the technician needs to confirm that the next hop interface is operational Which default gatewayaddress should the technician ping from PC1 to confirm this?, ccna 1 enetwork final exam 2011, ccna examsyllabus 2011, cisco 1 enetwork final exam answers, examen final ccna 1, ccna1 final exam v4 0 2011,ccnaanswers final 2, examen ccna 2011, final test ccna 1 2011, 2011 ccna, ccna1 final exam answers 2011pdf, Refer to the exhibit The serial interface of the router was configured with the use of the commands thatare shown The router cannot ping the router that is directly connected to interface serial 0/0/0 What shouldthe network technician do to solve this p, 2011 exam answers, ccna 1 2011 final, enetwork final 2011, Referto the exhibit Which diagram depicts the path through the network that is represented in the output of thetracert command?, What can the user do from the command prompt Router(config-line)# ? Configure one ofthe network interfaces Configure one of the physical or virtual lines Verify the running configuration on thedevice Configure the parameters for one of the routing proto, ccna latest exam 2011, ccna1 finals

Tags: CCNA 1, CCNA 1 Final, CCNA 1 Final Exam V4.0 Answers 2011, CCNA 1 Practice Final ExamAnswers, CCNA 2011, CCNA Answers 2011, CCNA Exam 2011, CCNA Final, CCNA Final 2011, CiscoCCNA 1 Final Exam Answers, Exam 2011, Final Exam, Network Fundamentals Final Exam Answers

48 Responses - Add Yours+

Simon says:February 20, 2011 at 6:35 pm

1.


24 of 38 10/11/2011 8:40 PM

Refer to the exhibit. PC1 is unable to access PC2. To troubleshoot this problem, the technician needs toconfirm that the next hop interface is operational. Which default gateway address should the technicianping from PC1 to confirm this?

10.0.0.254

192.168.0.249

192.168.0.250

10.0.1.254

Could you review this question I’m not sure its correct… I think the answer is the last option. Pleasereply urgently

Reply

ladyme says:March 1, 2011 at 4:52 am

the 1st option is the ip add that is being assigned to the Fa0/0 of the router…

Reply

usama says:March 1, 2011 at 12:19 pm

10.0.0.254

is right .. basic concept .. any pc with switch or not attach with router by interface . this interfaceis the gatway for pc ( users )

Reply

Michelle says:March 14, 2011 at 2:36 am

The question is asking the default gateway of PC1, of course it’s 10.0.0.254. 10.0.1.254 is PC2′sdefault gateway

Reply

Rupom says:April 15, 2011 at 8:58 pm

i think ans will be 192.168.0.250/10.0.1.254 …because,here the technician needs to confirm that the next hop interface is operational ornot.10.0.0.254 will not give u any information of next hop..

Reply

Shashipriya89 says:


25 of 38 10/11/2011 8:40 PM

June 13, 2011 at 6:54 am

Answer is 10.0.0.254 …because question ask “…..ping from PC1 to confirm this?”its from PC 1 not from PC 2 ..!!

Reply

Newbie says:February 21, 2011 at 10:52 pm

MY TWO CENTS WORTH..Q.3Refer to the exhibit. The network administrator remotely accesses the CLI of RouterB from PC1 usinga secure connection. Which statement is true about this connection?

The SSH service is used to connect PC1 to RouterB. “Question askes for a SECURE connection, telnetis not secure.

Q.4Refer to the exhibit. What three statements are true about the IP configuration that is shown? (Choosethree.)

The network on which this computer resides can have 30 hosts.The computer is unable to communicate outside of the local network.”The gateway address is on adifferent subnet, this has a 224 mask networks hop in 32″The address that is assigned to the computer represents private addressing

Q.8Which three addresses are private IP addresses? (Choose three.)10.0.0.1172.31.31.10.”Read question Properly..Choose 3″192.168.8.8

Q.9The subnet mask on host C is improperly configured. “Notice it has a /27, it should be /28. A and B areon the 172.16.31.96 – 172.16.31.111, C is on 172.16.31.80 – 172.16.31.95.

Q.28Which table accurately associates the RFC 1918 private IP addresses with the correct network mask?192.168.0.0 255.255.0.0 /16172.16.0.0 255.240.0.0 /1210.0.0.0 255.0.0.0 /8

Q.37Which process provides the means to send and receive data when running multiple applications at thesame time on a computer?Segmentation

Q.49

Ctrl-R Redisplays a line

Reply

2.


26 of 38 10/11/2011 8:40 PM

Rupom says:April 16, 2011 at 3:51 pm

u r awsm man …. every correction is correct

Reply

jessie says:February 22, 2011 at 9:54 pm

43. Which command or commands will require authentication to access the privileged exec mode?


RTRA(config)# line con 0RTRA(config-line)# loginRTRA(config-line)# password cisco


Could you review this question I’m not sure its correct… I think the answer is the first option. Pleasereply urgently

Reply


authentication … so this will be in sesion like line vty


is right

Reply

Jae says:March 3, 2011 at 8:19 am

The answer should be:


since the question is asking about privileged exec mode not telnet session.

Reply

3.


27 of 38 10/11/2011 8:40 PM

Vanessa says:March 9, 2011 at 1:55 am

I think so too. enable secret is for privilege-exec authentication

Reply

emil says:April 7, 2011 at 8:20 pm

But “service password encryption” will not help you at all to authenticate. It will justencrypt passwords at show running config

Reply

Lusion says:May 8, 2011 at 2:04 am

Enable secret will only encrypt the password but does not require login. That what thelogin command is for.


This is the correct answer and you can reverse the commands to make more sense whensetting up the router.

RTRA(config)# line vty 0 4RTRA(config-line)# password ciscoRTRA(config-line)# login

Doing it that way actually makes more sense.

Reply

Aurora says:May 30, 2011 at 4:06 pm


This command is used to make an authentication when the users try to access andevice by telnet.So, the correct answer isRTRA(config)# enable secret cisco

Since this command is already encrypted, then need no any other command to makeso.

This command :


28 of 38 10/11/2011 8:40 PM

RTRA(config)# service password encryptionis used to encrypt the password that you put on an authentication of both lineconsole and vty.

Reply

Patrol form ZP says:June 6, 2011 at 10:38 pm

Ofcourse the first answer is correct. They ask about privilege exec mode, and“enable secret password” doing it. Try in PT on any device:enableconf tenable secret ciscoexitexit

and then try to login in to privilege exec mode. The system asku you about thepassword(cisco).

“service password encryption” is not required and this command don’t haveinfluence on seting password for privileged exec mode.

Reply

jessie says:February 22, 2011 at 11:21 pm

9.

Refer to the exhibit. Host C is able to ping 127.0.0.1 successfully, but is unable to communicate withhosts A and B in the organization. What is the likely cause of the problem?

Hosts A and B are not on the same subnet as host C.

The IP addresses on the router serial interfaces are wrong.


The FastEthernet interface fa0/0 of router 1 is wrongly configured.

Could you review this question I’m not sure its correct… I think the answer is the last option. Pleasereply urgently

Reply


Q9


4.


29 of 38 10/11/2011 8:40 PM

is the right answer

Reply

Satman says:April 12, 2011 at 7:49 am

Answer C is maybe expected, but it is not the right one!!The question is:Host C is able to ping 127.0.0.1 successfully, but is unable to communicate with hosts Aand B in the organization. What is the likely cause of the problem?… and it is not because of improper subnet mask. Even with the wrong mask you will beable to ping host A from host C!!

So IMHO, none of the answers are right!!!

Reply

Satman says:April 13, 2011 at 8:06 am

Yes, I have tried it in packet tracer and the problem does not exist. You can pinghosts A and B regardless of subnet mask on host C.

So the question is stupid !!

Reply

Net says:February 23, 2011 at 8:31 pm

No it isnt were pinging to default gateway (its a next hop) from PC1 and thats 10.0.0.254.

Reply

nix says:March 9, 2011 at 10:37 pm

i agree!10.0.0.254 is the next hop.

Reply

5.


Q3

The connection is made through a VTY session on the router.

about ssh secure the contentvty secure username and password ( connection )

6.


30 of 38 10/11/2011 8:40 PM

Reply

tyny says:March 12, 2011 at 10:22 pm

IF WE READ THIS “Choosing a SSH ClientSSH (or Secure Shell) is a protocol that can be used to log into a remote machine (your VirtualServer) and provide secure encrypted communications between your Virtual Server and yourlocal computer. All of the commands you would use in a Telnet client, you can use in an SSHclient. The only difference is that the communication is made via encrypted channels to and fromyour Virtual Server.” i think the answer is “The SSH service is used to connect PC1 to RouterB.

“

Reply

Tzvetan says:March 3, 2011 at 3:55 pm

What about Q2….?Is the answer “Neighboring routers are polled to find the best path.” right?

Reply


Q2 I think the right answer is “The packet will be discarded”and “The packet will be forwarded to a default route if one is present”

Reply

AMIR GOUDA says:March 26, 2011 at 5:12 am

yes,I’m with you (tyny). I think that they are the two right answers.

Reply

samir says:June 21, 2011 at 9:13 am

yes,I’m with you (Amir). I think that they are the two right answers.

Reply

Comm. says:September 3, 2011 at 10:02 am

yes i thought that too

Reply

7.


31 of 38 10/11/2011 8:40 PM


Q43 answer is “RTRA(config)# enable secret ciscoRTRA(config)# service password encryption

”Q9 answer is “The subnet mask on host C is improperly configured” must be /28 like router2 fa 0/0

Reply

8.

ashwin2011 says:March 13, 2011 at 12:00 pm

hey guys in Q3The network administrator remotely accesses the CLI of RouterB from PC1 using a SECUREconnection

we all know that telnet is not secure, is that answer right ?

should it not be d.

*The SSH service is used to connect PC1 to RouterB.

Reply

Lusion says:May 14, 2011 at 4:12 am

Yes, SSH is the correct answer. Telnet is not secure and therefore the wrong answer.

Reply

9.

X says:May 12, 2011 at 12:50 pm

8. Which three addresses are private IP addresses? (Choose three.)

172.31.31.10 is missing.

Reply

Anoy says:August 23, 2011 at 1:49 am

Can I know how to determine it is a private IP or public IP?

Reply

10.

daisy says:May 25, 2011 at 9:36 pm

banner motd messages, im sure that is the wrong answer, should it not be to prevent un authorised

11.


32 of 38 10/11/2011 8:40 PM

access and assist in legal prosecution

Reply

Ether says:August 29, 2011 at 12:35 am

A banner doesn’t prevent anything, it merely provides some text. As such you can use it only fora warning or to let users know something. It can’t actually do anything practical, like preventingaccess.

Reply

menna says:June 1, 2011 at 9:32 pm

about Q24 i think the answer will be;1-to prevent unauthorized access to router2-to provide a welcome message to users who access the router

is that answer true or …..?

Reply

12.


Q4. I’m sure that answer: “The IP address that is assigned as the default gateway is valid for this host”is incorrect. The computer never reaches his default gateway, why? Because when computer dooperation AND on 192.168.34.1(PC’s default gateway) and his subnet mask, computer will be thinkthat this IP is from other subnet. When frame is adressed to PC which is from the same subnet(f.e:192.168.34.48), source computer send packed to the switch, and then to the destination PC, so thecorrect answer is: “The computer is unable to communicate outside of the local network.”

Reply

13.


Q19. I think the correct answer is A:R1#copry running-config tftpName of configuration file to write [R1-run]? R1-configWrite file R1-config to 192.168.3.2? [confirm]

In question we see: the technican save the configuration R1, then “he has made several changes”, sothe wrong configuration is in running-config.

Reply

14.

Revital says:June 7, 2011 at 3:01 am

Refer to question 40

15.


33 of 38 10/11/2011 8:40 PM

Could you review this question I’m not sure its correct… I think the answer is IP address:192.168.100.21; Subnet Mask: 255.255.255.248; Default Gateway: 192.168.100.18

the next hop is 192.168.100.18

thanksRevital

Reply

Faust says:June 21, 2011 at 4:39 am

192.168.100.18 is not the next hop, it is a switch.

192.168.100.17 is a router and is the next hop outside of the broadcast domain.

Reply

Carlos says:June 7, 2011 at 4:56 pm

24. What are two purposes for configuring a banner on a router? (Choose two.)

to announce system downtime

to prevent unauthorized access to the router

to provide a description of interface connections

to assist in legal prosecution for unauthorized access

to provide a welcome message to users who access the router

correct answers would :to prevent unauthorized access to the routerto assist in legal prosecution for unauthorized access

Reply

16.

sasas says:June 14, 2011 at 7:11 pm

man i think it s because of the routing table

Reply

17.

Yas says:June 15, 2011 at 12:34 pm

hey guys,

im planning on taking the test next month, are these the answers to most of the CCNA test questions? isthis enough to take the test?

18.


34 of 38 10/11/2011 8:40 PM

Reply

Bla says:June 28, 2011 at 11:33 am

No it isn’t.There is a pool of mor than 500 questions, where you will get about 50 to your exam.Some of my classmates took the exam last week, and they said that there were only about 10questions they have found in the internet. The other 40 must be solved by yoursefl, and 10correct answers isn’t enough to pass the exam

Reply

Ether says:July 3, 2011 at 9:43 am

I have taken final exam two day ago, i advice u to study these qeustions (WITH THECORRECTIONS OF THE USERES REPLIED),And study the Version of 2010 of these answers.. plus so much little information of the chapters, ihad 75% in my exam..Good Luck

Reply

A user says:July 16, 2011 at 9:48 am

At q28 the answer is C : subnet masks are /16 /12 /8

Reply

19.

A user says:July 16, 2011 at 10:12 am

Q49 the answer is CTRL-R …[c]

Reply

20.

Leave a Reply

Name (required)

Mail (will not be published) (required)

Website


35 of 38 10/11/2011 8:40 PM

Categories

CCNA 1 – Network Fundamentals (V4.0) (13)CCNA 2 – Routing Protocols and Concepts (V4.0) (12)CCNA 3 – LAN Switching and Wireless (V4.0) (8)CCNA 4 – Accessing the WAN (V4.0) (11)CCNA 1 – Networking Basics (V3.1) (13)CCNA 2 – Router and Routing Basics (V3.1) (13)CCNA 3 – Switching Basics and Intermediate Routing (V3.1) (10)CCNA 4 – WAN Technologies (V3.1) (8)

Tags

CCNA 1 CCNA 1 Module 1 Answers 2010 CCNA 1 Module 2 Answers 2010 CCNA 1 Practice Final Exam Answers

CCNA 2 CCNA 3 CCNA 4 CCNA 4 Final CCNA 4 Final Exam V4.0 Answers 2011 CCNA 4Final Exam V4.0 Answers 2012 CCNA 4 Practice Final Exam Answers CCNA 2011 CCNA 2012 CCNAAnswers 2011 CCNA Answers 2012 CCNA Exam 2011 CCNA Exam 2012 CCNA Exploration 1 Chapter 1 Answers CCNA

Exploration 1 Chapter 2 Answers CCNA Exploration 3 Chapter 1 Answers CCNA Exploration 3 Chapter 2 Answers CCNA Final CCNA Final2011 CCNA Final 2012 CCNA Module 1 Answers CCNA Module 2 Answers CCNA Module 3Answers CCNA Module 4 Answers CCNA Module 5 Answers CCNA Module 6 AnswersCCNA Module 7 Answers CCNA Module 8 Answers CCNA Module 9 Answers CCNA Module 10Answers CCNA Module 11 Answers Cisco CCNA 1 Final Exam Answers Cisco CCNA 4 Final Exam AnswersExam 2011 Exam 2012 Final Exam LAN Switching and Wireless Chapter 1 Answers LAN Switching and Wireless Final ExamAnswers Network Fundamentals Chapter 1 Answers Network Fundamentals Chapter 2 Answers Network Fundamentals Final ExamAnswersDownload CCNA PDF File CCNA Tools CCNA Updated 2011

Most Views

CCNA 1 Final Exam Answers 2011 - 182,369 viewsCCNA 4 Final Exam V4.0 Answers - 132,902 viewsCCNA 3 Final Exam V4.0 Answers - 129,048 viewsCCNA 1 Final Exam V4.0 Answers - 123,749 views


36 of 38 10/11/2011 8:40 PM

CCNA 1 Chapter 2 V4.0 Answers - 87,151 viewsCCNA 1 Chapter 3 V4.0 Answers - 79,783 viewsCCNA 2 Chapter 1 V4.0 Answers - 77,063 viewsCCNA 1 Chapter 11 V4.0 Answers - 77,040 viewsCCNA 1 Chapter 5 V4.0 Answers - 70,995 viewsCCNA 1 Chapter 4 V4.0 Answers - 67,059 views

Popular Tags

ccna answers, Refer to the exhibit Interface Fa0/0 on router A is generating excessive broadcast traffic WhichLAN segments will affected by the excessive broadcasts?, ccnaanswers, ccnaanswers com, Refer to theexhibit Which command should be issued to configure the address of the router interface that is attached tothis computer?, ccna answer, Refer to the exhibit After the commands are entered which password will berequired to establish a Telnet session with the router?, Refer to the exhibit A technician uses the show ip routecommand to troubleshoot a network and receives the output that is shown What is indicated by the route thatis labeled R*?, ccna 1 final exam answers 2011, Which two programs can be used to accomplish terminalemulation for configuring a router from the CLI through the console port? (Choose two ), A networktechnician notes that ports Fa0/9 through Fa0/12 on a switch have been assigned to VLAN 40 VLAN 40however was improperly named and the technician deletes it What happens to the ports that were assigned toVLAN 40?, An administrator makes changes to the default configuration of a router and saves them toNVRAM After testing it is discovered that the configurations did not have the desired effect and must beremoved What steps must be taken to remove the changes and r, Refer to the exhibit A network administratorneeds to download a previously saved configuration file from the TFTP server to Switch1 Which commandwill accomplish this task?, ccna1 final exam answers 2011, ccna 1 final exam, ccna 1 final exam answers, Anetwork administrator enters the enable command at the Switch> prompt of a new switch What mode will theswitch enter?, A technician makes several changes to the running configuration on a router but the desiredresults are not achieved The technician issues the reload command What action will be taken by the router?,Refer to the exhibit A network administrator tries to test the connectivity between routers R1 and R2 but theattempt to ping is unsuccessful Based on the show ip interface brief command outputs what could be thepossible cause of the problem?, Refer to the exhibit What needs to be done to allow these two routers toconnect successfully?, Refer to the exhibit The broadcast traffic from PC1 is consuming bandwidth on theinterswitch trunks What should be done to prevent this from happening?, ccna 4 final exam, ccna 2 chapter 2answers, ccna 3 chapter 1, A network administrator issued the erase nvram: command on a switch What willbe the outcome of the command?, A network administrator is tasked with connecting two workgroups that areconfigured to use different subnets Which device should be selected to allow connectivity between users onthe two networks?, ccna 3 final exam, ccna 2 chapter 1 answers, ccna 4 chapter 3, During the initialconfiguration of a router the administrator enters the command no service config How will the router behaveas a a result of this command?, ccna 1 chapter 6 answers, ccna 3 chapter 2, ccna 2 chapter 3 answers, Referto the exhibit A network technician has made several changes to R1 since the configuration has last beensaved The modified configuration did not produce the desired changes The technician wants to store a backupcopy of the saved configuration on a, ccna 1 chapter 2 answers, Refer to the exhibit Which two switchinterfaces would be RSTP edge ports? (Choose two ), Refer to the exhibit Host A is able to access resourceson the local LAN but is unable to access any resources on the Internet What is the likely cause of thisproblem?, ccna1 final exam, CCNA 4 chapter 1, ccna 2 chapter 4 answers, CCNA1 final exam 2011, ccna 2chapter 10, ccna 1 chapter 9 answers, ccna chapter 5 answers, ccna 4 chapter 4, ccna 1 final exam 2011, ccna1 chapter 10 answers, ccna 1 chapter 4 answers, ccna 1 chapter 7 answers, A company is deciding whichWAN connection type it should implement between its main office and branch offices The company wants touse a cost-effective service that provides virtual circuits between each office The company also wants to beable to transm, ccna 1 chapter 11 answers, ccna 2 chapter 6 answers, ccna 2 chapter 6, ccna 3 final examanswers 2011, ccna 2 chapter 1, Which default EIGRP configuration must be modified to allow an EIGRProuter to advertise subnets that are configured with VLSM?, ccna 2 chapter 7, ccna chapter 2 answers, A


37 of 38 10/11/2011 8:40 PM

network technician analyzes the network and notices late collisions The collisions occur accompanied byjabber that originates from the server What is the likely cause of the problem?, ccna 2 chapter 7 answers,ccna 2 chapter 5 answers, CCNA 3 chapter 3, ccna chapter 6 answers, ccna 2 chapter 9 answers, ccna 3chapter 4, ccna 2 chapter 11, ccna chapter 9 answers, ccna 2 chapter 8, ccna chapter 4 answers, ccna 2chapter 3, ccna 2 chapter 10 answers, ccna 4 chapter 2, CCNA final exam answers, ccna chapter 8 answers,ccna 2 chapter 11 answers, ccna 3 chapter 3 answers, ccna 2 chapter 5, ccna 1 chapter 5 answers, ccna 4chapter 5, ccna 4 chapter 7, ccna 1 chapter 8 answers, ccna 3 chapter 7, CCNA 2 chapter 9, ccna 2 chapter 8answers, ccna 1 chapter 10, ccna 3 chapter 6, CCNA 2 Chapter 2, ccna 2 chapter 4, ccna 3 chapter 5, CCNAchapter 3 answers, ccna 1 chapter 11, Which configuration on the vty lines provides the best security measurefor network administrators to remotely access the core routers at headquarters?, CCNA 1 chapter 3 answers,ccna 1 chapter 6, ccna 1 chapter 7, Which Frame Relay topology is a compromise of costs reliability andcomplexity when the WAN contains one headquarters site 40 regional sites and several sites within eachregional site?, ccna chapter 11 answers, ccna 4 chapter 6, Refer to the exhibit A network administrator hasdesigned and implemented a hierarchical network What is the maximum network diameter between any twohosts on the network?, ccna 4 chapter 8

Recent Posts

CCNA 4 Final ExamCCNA 4 Final Exam Answers 2011CCNA 1 Final Exam Answers 2011CCNA 4 Final Exam V4.0 AnswersCCNA 4 Chapter 8 V4.0 Answers

Recent Comments

Blazed on CCNA 1 Chapter 5 V4.0 Answersbobo on CCNA 4 Final Exam V4.0 Answersanti on CCNA 4 Final Exam Answers 2011bassel on CCNA 4 Final Exam V4.0 AnswersJLerias on CCNA 2 Final Exam V4.0 Answers

Directories

Blogs Topsites - TOP.ORG

Rate My Blog

Copyright © 2011 CCNA Answers – CCNA Exam – CCNA Exams. Entries (RSS).


38 of 38 10/11/2011 8:40 PM

ccna 1 final exam v4 answers 2011

Documents

patrol form

privileged

announce system

web page housed

table accurately

privilege

network design

interface