ccna 3 final v4-2 examenes

79
CCNA 3 Final 1 V4.0 CCNA 3 finales 1 V4.0 Posted by CCNA Exam at 8:13 PM | Monday, April 27, 2009 Publicado por el examen CCNA en 20:13 | Lunes, 27 de abril 2009 1 1 Refer to the exhibit. Refiérase a la exposición. The Fast Ethernet port Fa0/1 on the switch is configured for auto- negotiate speed/duplex settings, and the NIC on the machine is set to 100 Mbps, full-duplex. El puerto Fast Ethernet Fa0 / 1 en el conmutador está configurado para la negociación automática de velocidad / dúplex, y la tarjeta en la máquina se fija a 100 Mbps, full-duplex. The log error message shown has been received. El mensaje de error de registro se muestra ha sido recibida. What two solutions could fix the problem? ¿Qué dos soluciones podría solucionar el problema? (Choose two.) (Elija dos.) Configure the switch manually for auto-negotiate speed/duplex and the NIC on the machine for 100 Mbps, half- duplex. Configurar manualmente el interruptor para la negociación automática de velocidad / dúplex y la tarjeta en la máquina de 100 Mbps, half-duplex. **Configure both sides of the link for auto-negotiate speed/duplex settings. ** Configurar ambos lados del enlace para la negociación automática de velocidad / dúplex. **Manually configure both sides of the link for 100 Mbps, full-duplex. ** Configuración manual de ambos lados del enlace de 100 Mbps, full-duplex. Manually configure the switch for 100 Mbps, full-duplex, and the NIC on the machine for auto-negotiate. Configurar manualmente el interruptor de 100 Mbps, full-duplex, y la NIC en el equipo para auto-negociación. Manually configure the switch for 1000 Mbps, full-duplex, and the NIC on the machine for auto-negotiate. Configurar manualmente el interruptor para 1000 Mbps, full-duplex, y la NIC en el equipo para auto-negociación. 2 2 Refer to the exhibit. Refiérase a la exposición. Both

Upload: juanzulu

Post on 14-Oct-2014

843 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: CCNA 3 Final  V4-2 examenes

CCNA 3 Final 1 V4.0 CCNA 3 finales 1 V4.0 Posted by CCNA Exam at 8:13 PM | Monday, April 27, 2009 Publicado por el examen CCNA en 20:13 | Lunes, 27 de abril 2009

1 1 Refer to the exhibit. Refiérase a la exposición. The Fast Ethernet port Fa0/1 on the switch is configured for auto-negotiate speed/duplex settings, and the NIC on the machine is set to 100 Mbps, full-duplex. El puerto Fast Ethernet Fa0 / 1 en el conmutador está configurado para la negociación automática de velocidad / dúplex, y la tarjeta en la máquina se fija a 100 Mbps, full-duplex. The log error message shown has been received. El mensaje de error de registro se muestra ha sido recibida. What two solutions could fix the problem? ¿Qué dos soluciones podría solucionar el problema? (Choose two.) (Elija dos.) Configure the switch manually for auto-negotiate speed/duplex and the NIC on the machine for 100 Mbps, half-duplex. Configurar manualmente el interruptor para la negociación automática de velocidad / dúplex y la tarjeta en la máquina de 100 Mbps, half-duplex. **Configure both sides of the link for auto-negotiate speed/duplex settings. ** Configurar ambos lados del enlace para la negociación automática de velocidad / dúplex. **Manually configure both sides of the link for 100 Mbps, full-duplex. ** Configuración manual de ambos lados del enlace de 100 Mbps, full-duplex. Manually configure the switch for 100 Mbps, full-duplex, and the NIC on the machine for auto-negotiate. Configurar manualmente el interruptor de 100 Mbps, full-duplex, y la NIC en el equipo para auto-negociación. Manually configure the switch for 1000 Mbps, full-duplex, and the NIC on the machine for auto-negotiate. Configurar manualmente el interruptor para 1000 Mbps, full-duplex, y la NIC en el equipo para auto-negociación.

2 2 Refer to the exhibit. Refiérase a la exposición. Both switches are interconnected via a trunk link. Ambos interruptores están interconectados a través de un enlace troncal. Host A and Host B are on the default VLAN but are not able to exchange traffic. Host A y Host B están en la VLAN por defecto, pero no son capaces de intercambio de tráfico. What should be done to fix the problem? ¿Qué debe hacerse para solucionar el problema? Allow all VLANs on the trunk link. Permita que todas las VLAN en el enlace troncal. **Configure the same native VLAN on both ends of the trunk. ** Configurar la misma VLAN nativa en ambos extremos del tronco. Include a router or switch with Layer 3 capabilities. Incluye un router o switch de nivel 3 con capacidades. Remove the native VLAN from the trunk. Retire la VLAN nativa del tronco. Configure ISL encapsulation on both ends of the trunk. Configuración de encapsulamiento ISL en ambos extremos del tronco.

3 3 What are two benefits of the IEEE 802.11n standard? ¿Cuáles son dos beneficios del

Page 2: CCNA 3 Final  V4-2 examenes

estándar IEEE 802.11n? (Choose two.) (Elija dos.) single-input, single-output una sola entrada, de salida única **improved range ** Mejor oferta requires less equipment requiere menos equipo hardware upgrade for compatibility actualización de hardware para la compatibilidad **increased data rates ** Las tasas de aumento de los datos

4 4 Refer to the exhibit. Refiérase a la exposición. Switch SW2 has been newly purchased and added to the network. Switch SW2 ha sido recientemente adquirido y se añade a la red. What configuration should be applied to SW2 so that it participates in the same VTP domain as switch SW1, receives VLAN information from SW1, and synchronizes VLAN information? ¿Qué configuración se debe aplicar a SW2 para que participe en el mismo dominio VTP como interruptor SW1, recibe información de la VLAN de SW1, y sincroniza la información de VLAN? Configure SW2 as a VTP server with a higher revision number. Configurar el SW2 como un servidor VTP con un número de revisión más alto. **Configure SW2 as a VTP client. ** Configurar SW2 como un cliente VTP. Configure SW2 in VTP transparent mode. Configurar el SW2 en modo VTP transparente. Configure SW2 with no VTP domain password. Configurar el SW2 sin contraseña de dominio VTP. Disable VTP pruning on SW2. Deshabilitar la depuración VTP en SW2.

5 5 Refer to the exhibit. Refiérase a la exposición. All hosts are in listen mode. Todos los ordenadores están en modo de escucha. Host 1 and Host 4 both transmit data at the same time. Anfitrión 1 y 4 de acogida tanto de transmisión de datos al mismo tiempo. How do the hosts respond on the network? ¿Cómo responden los hosts en la red? (Choose two.) (Elija dos.) Hosts 1 and 4 may be operating full duplex so no collision will exist. Hosts 1 y 4 pueden estar operando en full duplex por lo que no existe colisión. The hub will block the port connected to Host 4 to prevent a collision. El hub bloqueará el puerto conectado al host de 4 a evitar una colisión. **After the end of the jam signal, a backoff algorithm is invoked. ** Después de la final de la señal de congestión, un algoritmo de backoff se invoca. Hosts 1 and 4 are assigned shorter backoff values to provide them priority to access the media. Hosts 1 y 4 se asignan los valores más cortos de postergación para darles prioridad para acceder a los medios de comunicación. **If a host has data to transmit after the backoff period of that host, the host checks to determine if the line is idle, before transmitting. ** Si un host tiene datos para transmitir después del período de retroceso de ese host, los controles host para determinar si la línea está en reposo, antes de transmitir.

6 6 Refer to the exhibit. Refiérase a la exposición. Which statement is true regarding the information shown? ¿Cuál afirmación es correcta con respecto a la información que se muestra? Only one VLAN is currently configured to use the trunk links. Sólo una VLAN está actualmente configurado para utilizar los enlaces troncales.

Page 3: CCNA 3 Final  V4-2 examenes

Inter-VLAN routing is not functioning because the switch is still in the process of negotiating the trunk link. Enrutamiento entre VLAN no funciona porque el interruptor está todavía en el proceso de negociación del enlace troncal. **Interfaces gi0/1 and fa0/1 are carrying data from multiple VLANs. ** Interfaces Gi0 / 1 y fa0 1 / están llevando a datos de múltiples VLANs. The interfaces shown are shut down. Las interfaces se muestran en la cerrará.

7 7 Refer to the exhibit. Refiérase a la exposición. After the listed commands are entered into router R1 and switch S1, the administrator enters the show interface fa0/1 trunk and gets the results shown. Después de los comandos que aparecen se introducen en el router R1 y el switch S1, el administrador entra en el show interface Fa0 / 1 del tronco y obtiene los resultados mostrados. What is the likely problem? ¿Cuál es el problema más probable? The trunk is established, but no VLANs have been configured to use it. El tronco está establecido, pero no las VLAN se han configurado para usarlo. **The trunk has not been established because the router does not support dynamic trunking protocol. ** El tronco no se ha establecido ya que el router no soporta el protocolo de trunking dinámico. The router, the switch, or both must be configured with the dynamic desirable option for dynamic trunking protocol to establish a trunk. El router, el switch, o ambos debe estar configurado con la opción dinámica conveniente para el protocolo de concentración de enlaces dinámicos a establecer un tronco. The router is missing the dynamic trunking protocol statements necessary to form a trunk. El router es que faltan los estados dinámicos de trunking protocolo necesario para formar un tronco.

8 8 Refer to the exhibit. Refiérase a la exposición. Which device is the authenticator? ¿Qué dispositivo es el autenticador? **access point ** Punto de acceso data server datos del servidor client cliente RADIUS server Servidor RADIUS

9 9 What three radio frequency bands are designated by the ITU-R as unlicensed for industrial, scientific, and medical (ISM) communities and are therefore supported by IEEE 802.11? ¿Qué tres bandas de frecuencias de radio son designados por el UIT-R sin licencia para uso industrial, científica y médica (ISM) de las comunidades y por lo tanto el apoyo de IEEE 802.11? (Choose three.) (Elija tres.) **900 MHz ** 900 MHz 9 MHz 9 MHz **2.4 GHz ** 2,4 GHz 5.7 GHz 5.7 GHz **5 GHz ** 5 GHz 900 GHz 900 GHz

10 10 What three tasks should be performed before moving a Catalyst switch to a new VTP

Page 4: CCNA 3 Final  V4-2 examenes

management domain? ¿Qué tres tareas que deben realizarse antes de mover un switch Catalyst a una nueva administración de dominio VTP? (Choose three.) (Elija tres.) **Verify that the new switch has a lower configuration revision number than the other switches in the domain. ** Compruebe que el interruptor de nuevo tiene un número de revisión de configuración más bajo que los otros switches en el dominio. Reset the VTP counters to allow the switch to synchronize with the other switches in the domain. Restablecer los contadores VTP para permitir que el interruptor para sincronizar con los otros switches en el dominio. Download the VTP database from the VTP server in the new domain. Descargar la base de datos VTP del servidor VTP en el nuevo dominio. Configure the VTP server in the domain to recognize the BID of the new switch. Configurar el servidor VTP en el dominio de reconocer la oferta del nuevo interruptor. **Select the correct VTP mode and version. ** Seleccione el modo correcto de VTP y la versión. **Configure the switch with the name of the new management domain. ** Configurar el switch con el nombre del dominio de gestión.

11 11 Which three configurations are required to allow remote access to a switch using the telnet command? ¿Qué tres configuraciones se requieren para permitir el acceso remoto a un switch con el comando telnet? (Choose three.) (Elija tres.) **default gateway ** Puerta de enlace predeterminada **vty line password ** Vty contraseña de la línea console line password contraseña de consola de línea HTTP server interface authentication la interfaz de autenticación del servidor HTTP **IP address of the switch on the management VLAN ** Dirección IP del switch en la VLAN de administración duplex and speed on the Ethernet port used for the connection dúplex y la velocidad en el puerto Ethernet que se utiliza para la conexión

12 12 What are three benefits of a hiearchical network design model? ¿Qué son las tres ventajas de un modelo de diseño de redes hiearchical? (Choose three.) (Elija tres.) **scalability ** Escalabilidad higher speed mayor velocidad mobility la movilidad **security ** Seguridad **manageability ** Administración cost costo

13 13 Refer to the exhibit. Refiérase a la exposición. The network administrator has added VoIP telephones and a VoIP gateway computer to the existing switch infrastructure, and then created the VLANs. El administrador de red ha añadido teléfonos VoIP y un equipo de puerta de enlace VoIP a la infraestructura de switches, y luego creó la VLAN. What must be done to converge the network? ¿Qué debe hacerse para converger en la red? Combine all traffic except management traffic to a single VLAN. Combine todo el tráfico excepto el tráfico a una VLAN de gestión única. Combine all traffic including management traffic to a single VLAN. Combine todo el

Page 5: CCNA 3 Final  V4-2 examenes

tráfico como de gestión del tráfico a una VLAN única. Use Layer 3 switching to combine the voice and data traffic at S1. Utilice conmutación Layer 3 para combinar el tráfico de voz y datos en S1. **The network is already converged. ** La red ya es convergente. Implement a common IP addressing scheme for both VoIP phones and PCs. Implementar un esquema de direccionamiento IP común tanto para teléfonos VoIP y PC.

14 14 Refer to the exhibit. Refiérase a la exposición. R1 is configured for traditional inter-VLAN routing. R1 se configura para el tradicional enrutamiento entre VLAN. R1 can ping Pc3 but cannot ping Pc1. R1 puede hacer ping a PC3, pero no puede hacer ping a PC1. What is a possible cause for this failure? ¿Cuál es una posible causa de este fracaso? **S1 port fa0/11 is in the wrong VLAN. ** S1 puerto fa0/11 está en la VLAN mal. Pc1 IP address is incorrect. Pc1 dirección IP es incorrecta. R1 does not have an active routing protocol. R1 no tiene un protocolo de enrutamiento activa. Router interface fa0/0 has the wrong trunk encapsulation type configured. interfaz del router Fa0 / 0 tiene el tipo de encapsulación tronco mal configurado.

15 15 Refer to the exhibit. Refiérase a la exposición. A new host needs to be connected to VLAN 1. Un nuevo huésped debe estar conectado a la VLAN 1. Which IP addresses should be assigned to this new host? ¿Qué direcciones IP deben ser asignados a este nuevo host? 192.168.1.1 /26 192.168.1.1 / 26 192.168.1.11 /28 192.168.1.11 / 28 **192.168.1.22 /28 ** 192.168.1.22 / 28 192.168.1.33 /28 192.168.1.33 / 28 192.168.1.44 /28 192.168.1.44 / 28 192.168.1.55 /28 192.168.1.55 / 28

16 16 Refer to the exhibit. Refiérase a la exposición. Each switch is shown with its MAC address. Cada switch se muestra con su dirección MAC. Which switch will be elected as the spanning-tree root bridge if the switches are configured with their default priority values? Cuál de los switches será elegido como el puente raíz spanning-tree si los switches se configuran con sus valores por defecto prioridad? switch A Un interruptor de switch B interruptor B switch C interruptor C switch D interruptor D switch E interruptor de E **switch F ** Interruptor F

17 17 Refer to the exhibit. Refiérase a la exposición. All switches are configured with rapid PVST+. Todos los interruptores se configuran con TSVP rápida +. Port Gi0/2 on S2 is the root port. Puerto Gi0 / 2 en S2 es el puerto raíz. A network administrator issues the

Page 6: CCNA 3 Final  V4-2 examenes

spanning-tree link-type point-to-point command on port Gi0/1 for switch S2. Un administrador de red emite el comando spanning-tree punto-a-punto de enlace de tipo de Gi0 puerto / 1 para el interruptor S2. What is the result of this command? ¿Cuál es el resultado de este comando? **If the link between D1 and C1 fails, port Gi0/2 on S2 rapidly transitions to the forwarding state. ** Si el vínculo entre D1 y C1 falla, Gi0 puerto / 2 en S2 rápidamente las transiciones al estado de envío. PortFast is enabled on Gi0/2 on S2. PortFast está habilitado en Gi0 / 2 en S2. Port Gi0/2 on S2 becomes a designated port. Puerto Gi0 / 2 en S2 se convierte en un puerto designado. Broadcast packets are restricted on the link between S2 and D1. paquetes de difusión se limitan en el enlace entre S2 y D1. Port Gi0/2 on S2 becomes an edge port. Puerto Gi0 / 2 en S2 se convierte en un puerto de borde.

18 18 Refer to the exhibit. Refiérase a la exposición. The switches are configured for VTP as shown. Los conmutadores están configurados para VTP como se muestra. Which two statements correctly describe the operation of these switches? ¿Qué dos afirmaciones describen correctamente la operación de estos interruptores? (Choose two.) (Elija dos.) A new VLAN can be added to Switch1 and that information will be added only to Switch2. Una nueva VLAN se puede agregar a Switch1 y que la información se agregará sólo para Switch2. An existing VLAN can be deleted from Switch2 and that VLAN will be deleted from Switch1 and Switch4. Una VLAN existentes se pueden eliminar de Switch2 VLAN y que se eliminará de Switch1 y Switch4. A new VLAN can be added to Switch4 and that information will be added to Switch1, Switch2, and Switch3. Una nueva VLAN se puede agregar a Switch4 y que la información se añadirá a Switch1, Switch2 y switch3. **A new VLAN can be added to Switch1 and that information will be added to Switch2 and Switch4. ** Una nueva VLAN se puede agregar a Switch1 y que la información se añadirá a Switch2 y Switch4. A new VLAN can be added to Switch3 and that information will be added to Switch1, Switch2, and Switch4. Una nueva VLAN se puede agregar a switch3 y que la información se añadirá a Switch1, Switch2 y Switch4. **An existing VLAN can be deleted from Switch4 and that VLAN will be deleted from Switch1 and Switch2. ** Una VLAN existentes se pueden eliminar de Switch4 VLAN y que se eliminará de Switch1 y Switch2.

19 19

Refer to the exhibit. Refiérase a la exposición. A host attached to port Fa0/3 of the switch can communicate with the host connected to port Fa0/16, but cannot communicate with the host connected to port Fa0/2. Un host conectado al puerto Fa0 / 3 del switch puede comunicarse con el host conectado al puerto Fa0/16, pero no puede comunicarse con el host conectado al puerto Fa0 / 2. What could account for this failure? ¿Qué podría explicar este fracaso? Fa0/3 is down. Fa0 / 3 se ha reducido.

Page 7: CCNA 3 Final  V4-2 examenes

The trunk link to the router is down. El enlace troncal con el router no funciona. **The VLAN0010 network address is missing from the routing table. ** La dirección de red VLAN0010 no se encuentra en la tabla de enrutamiento. Fa0/2 has been assigned to the administrative VLAN. Fa0 / 2 se ha asignado a la VLAN de administración. The router does not have a functional routing protocol installed. El router no tiene un protocolo de enrutamiento funcional instalado.

20 20 A network administrator wants to add a new switch to the existing VTP domain. Un administrador de red desea agregar un nuevo modificador de la actual de dominio VTP. The new switch will have a VLAN that the administrator does not want visible to any other switches. El nuevo interruptor tendrá una VLAN que el administrador no quiere ver a ningún otro modificador. All other VLANs should be visible on all switches, and all VLANs should be visible to the new switch. Todas las otras VLAN deben ser visibles en todos los interruptores, y todas las VLAN deben ser visibles para el nuevo interruptor. Which solution meets the requirements with the least administrative effort? ¿Qué solución cumple con los requisitos con el menor esfuerzo administrativo? Add the switch in server mode. Añadir el interruptor en modo de servidor. After all VLANs have propagated to the new switch, change the trunked link to access mode. Después de todas las VLAN se han propagado al switch nuevo, cambiar el enlace troncal para acceder al modo. Add the private VLAN to the new switch. Agregar la VLAN privada al switch nuevo. Add the switch in server mode. Añadir el interruptor en modo de servidor. Add an extended range VLAN to the new switch as the private VLAN. Agregar una VLAN de rango extendido para el interruptor de nuevo como la VLAN privada. Add the switch in server mode. Añadir el interruptor en modo de servidor. Add the private VLAN to the new switch. Agregar la VLAN privada al switch nuevo. Enable VTP pruning and ensure that no ports are placed in the private VLAN on any other switches. Habilitar la depuración VTP y asegurar que no hay puertos se colocan en la VLAN privada sobre ningún otro modificador. **Add the switch in client mode. ** Agregar el switch en modo cliente. After the existing VLANs have propagated, change the switch to transparent mode. Después de las VLAN existentes se han propagado, cambiar el interruptor de modo transparente. Add the private VLAN. Agregar la VLAN privada. Add the switch in VTP transparent mode. Añadir el interruptor en modo VTP transparente. Manually add all VLANs to the switch. Agregue manualmente todas las VLAN en el conmutador.

21 21 Refer to the exhibit. Refiérase a la exposición. Host A sends a broadcast message. El host A envía un mensaje de difusión. Which devices will see the broadcast? ¿Qué dispositivos se verá la emisión? all hosts todos los hosts Host B and the router Host B y el router **Host C and the router ** Host C y el router the router, Host C, and all the hosts connected to Hub1 el router, el host C, y todas las máquinas conectadas a Hub1

22 22

Page 8: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Which three options correctly identify information that could be associated with this output?(Choose three.) ¿Qué tres opciones de identificar correctamente la información que podría estar asociado con esta salida? (Elija tres.) An IP address should be applied to FastEthernet3/0/0 for correct data routing. Una dirección IP se debe aplicar a FastEthernet3/0/0 de datos de enrutamiento correcta. **Standardized trunking protocol is used. ** Protocolo estandarizado de trunking se utiliza. A shutdown command has been applied to interface FastEthernet3/0/0. Un comando de cierre se ha aplicado a la interfaz FastEthernet3/0/0. **The configuration is appropriate for a router-on-a-stick network design. ** La configuración es apropiada para un router en el diseño de la red un palo. **Interface FastEthernet3/0/0 is subinterfaced. ** Interfaz FastEthernet3/0/0 es subinterfaced. Interface FastEthernet3/0/0.3 is mapped to the default administrative VLAN. Interfaz FastEthernet3/0/0.3 se asigna por defecto a la VLAN de administración.

23 23 Refer to the exhibit. Refiérase a la exposición. Spanning-tree port priorities are listed beneath each interface. prioridades spanning-tree puerto se muestran debajo de cada interfaz. The network administrator enters the spanning-tree vlan 1 root primary command on S4. El administrador de la red entra en la VLAN spanning-tree un comando de la raíz primaria de S4. Which three port results are correct? Cuáles son los tres resultados puerto son correctos? (Choose three.) (Elija tres.) **S1 Gi0/1 becomes a root port. ** Gi0 S1 / 1 se convierte en un puerto raíz. S3 Gi0/1 becomes a non-designated port. Gi0 S3 / 1 se convierte en un puerto no designado. S4 Gi0/1 becomes a root port. S4 Gi0 / 1 se convierte en un puerto raíz. **S4 Gi0/2 becomes a designated port. ** S4 Gi0 / 2 se convierte en un puerto designado. S2 Gi0/2 becomes a non-designated port. S2 Gi0 / 2 se convierte en un puerto no designado. **S1 Gi0/2 becomes a non-designated port. ** Gi0 S1 / 2 se convierte en un puerto no designado.

24 24 Refer to the exhibit. Refiérase a la exposición. Switches C1, D1, D2, and S2 have all been configured with RSTP. Interruptores C1, D1, D2 y S2 han sido configurados con RSTP. S1 and S3 are not capable of rapid PVST+ and are in the default configuration. S1 y S3 no son capaces de TSVP rápida + y está en la configuración por defecto. What three implications does this have for the Layer 2 network? ¿Qué tres implicaciones tiene esto para el nivel 2 de la red? (Choose three.) (Elija tres.) Because S1 and S3 are not trunking, they have no spanning-tree instance. Debido a S1 y S3 no son troncales, no tienen que abarca la instancia de árbol. A topology change BPDU from C1 forces the uplinks on S1 and S3 to stop forwarding traffic for twice the forward delay time. Un cambio de topología BPDU de C1 fuerzas de los enlaces ascendentes en S1 y S3 para detener el tráfico de reenvío para el doble del tiempo de retardo adelante. **Port Gi0/1 on D1 and port Gi0/1 on D2 become designated ports. ** Puerto Gi0 / 1 en D1 y Gi0 puerto / 1 en D2 se puertos designados.

Page 9: CCNA 3 Final  V4-2 examenes

**Loss of the root port link on S2 causes a rapid transition to non-designated port on S2. ** La pérdida de la relación puerto raíz en S2 ocasiona una rápida transición a la no-puerto designado en S2. **PortFast can be enabled on all ports on S1 and S3. ** PortFast se puede habilitar en todos los puertos en S1 y S3. Gi0/1 on S1 and Gi0/1 on S3 become designated ports. Gi0 / 1 en S1 y Gi0 / 1 en S3 convertido en puertos designados.

25 25 Refer to the exhibit. Refiérase a la exposición. The network administrator enters the configuration shown to allow both SSH and Telnet connections to the switch. El administrador de la red entra en la configuración que se muestra para permitir las conexiones SSH y Telnet al conmutador. The Telnet connections fail. Las conexiones de Telnet no. What is the most likely cause of this problem? ¿Cuál es la causa más probable de este problema? The SSH version number is wrong. El número de versión SSH es incorrecto. **SSH has been configured on the wrong line. ** SSH se ha configurado en la línea equivocada. The transport input command is configured incorrectly. El comando de entrada de transporte no está configurado correctamente. Telnet and SSH cannot be configured simultaneously. Telnet y SSH no se puede configurar de forma simultánea.

26 26 Refer to the exhibit. Refiérase a la exposición. On the basis of the configuration shown, how will an Ethernet frame on port GigabitEthernet0/1 be modified? Sobre la base de la configuración que se muestra, cómo un marco de Ethernet en el puerto GigabitEthernet0 / 1 modificarse? 802.1Q encapsulation prepends a 4-byte tag field in front of the original Ethernet frame and recomputes the frame check sequence (FCS) on the modified frame. encapsulación 802.1Q antepone un campo de etiquetas de 4 bytes en frente de la trama Ethernet original y vuelve a calcular la secuencia de verificación de trama (FCS) en el marco modificado. **802.1Q encapsulation inserts a 4-byte tag field into the original Ethernet frame between the source address and type or length fields. ** Inserta 802.1Q encapsulación de un campo de etiquetas de 4 bytes en la trama Ethernet original entre la dirección de origen y el tipo o campos de longitud. 802.1Q encapsulation prepends an 802.1p field in front of the original Ethernet frame and recomputes the frame check sequence (FCS) on the modified frame. encapsulación 802.1Q antepone un campo 802.1p en frente de la trama Ethernet original y vuelve a calcular la secuencia de verificación de trama (FCS) en el marco modificado. 802.1Q encapsulation inserts an 802.1p field into the original Ethernet frame between the source address and type or length fields. inserta la encapsulación 802.1Q un campo 802.1p en la trama Ethernet original entre la dirección de origen y el tipo o campos de longitud.

27 27 Refer to the exhibit. Refiérase a la exposición. Which two statements are true regarding what the cost value of 23 represents for Switch4? ¿Qué dos afirmaciones son ciertas con respecto a lo que el valor de costo, de 23 representa para Switch4? (Choose two.) (Elija

Page 10: CCNA 3 Final  V4-2 examenes

dos.) **This cost represents the lowest cost path for Switch4 to the root switch. ** Este costo representa la ruta de menor costo para Switch4 el switch raíz. A cost of 23 is the value being advertised out port 16 on the switch upstream (closer) to the root switch. Un costo de 23 es el valor que se anuncia a cabo el puerto 16 en el interruptor de aguas arriba (más cerca) para el switch raíz. Switch4 adds the cost of a Fast Ethernet link to 23 to determine its total cost to reach the root switch. Switch4 agrega el costo de una conexión Fast Ethernet a 23 para determinar su costo total para alcanzar el switch raíz. **Switch4 is connected via a Fast Ethernet link to an upstream switch that in turn is directly connected to the root switch via a Gigabit Ethernet link. Switch4 ** está conectada a través de un enlace Fast Ethernet a un conmutador de aguas arriba que a su vez está conectado directamente con el switch raíz a través de un enlace Gigabit Ethernet. The root switch is advertising a cost of 23, which is lower than any other switch in the VLAN0001 spanning-tree domain. El switch raíz es la publicidad con un costo de 23, que es inferior al de cualquier otro switch en el dominio VLAN0001 spanning-tree.

28 28 Which two statements describe Spanning Tree Protocol? ¿Qué dos afirmaciones describen Protocolo Spanning Tree? (Choose two.) (Elija dos.) **It eliminates Layer 2 loops in network topologies. ** Se elimina la capa 2 bucles en topologías de red. It eliminates the need for redundant physical paths in network topologies. Elimina la necesidad de rutas físicas redundantes en topologías de red. **It can only be used in networks in which Layer 2 switching is in use. ** Sólo se puede utilizar en redes de conmutación de nivel 2 que está en uso. It can only be used in networks where both routers and switches are used together. Sólo puede ser utilizado en redes en las que ambos routers y conmutadores se utilizan juntos. It can only be used in networks where routers are installed. Sólo puede ser utilizado en redes en las que los routers están instalados.

29 29 Refer to the exhibit. Refiérase a la exposición. What three statements describe why Host1 and Host2 are unable to communicate? ¿Qué tres afirmaciones que describen por qué host1 y host2 son incapaces de comunicarse? (Choose three.) (Elija tres.) **A router is required to forward traffic between the hosts. ** Hace falta un router para reenviar el tráfico entre los hosts. **The switch ports are on different VLANs. ** Los puertos del switch están en VLAN diferentes. The VLAN port assignments must be contiguous for each VLAN. Las asignaciones de puertos VLAN deben ser contiguas para cada VLAN. The host default gateway addresses must be on the same logical network. Las direcciones de puerta de enlace predeterminada debe estar en la misma red lógica. The switch IP address is on the wrong subnet. La dirección IP es el interruptor en la subred errónea. **The hosts are configured on different logical networks. ** Los anfitriones se configuran en diferentes redes lógicas.

30 30

Page 11: CCNA 3 Final  V4-2 examenes

What happens when the crypto key zeroize rsa command is entered on a switch configured with the transport input ssh command on the vty lines? ¿Qué sucede cuando la tecla de comando de cifrado RSA zeroize se introduce en un switch configurado con el comando ssh de transporte de entrada en las líneas vty? A new RSA key pair is created. Un nuevo par de claves RSA se crea. The switch defaults to allowing Telnet connections only. Los valores por defecto cambiar al permitir conexiones Telnet solamente. The switch is no longer able to make SSH connections as an SSH client. El interruptor no es capaz de hacer conexiones SSH como un cliente SSH. **The switch allows remote connections only after a new RSA key pair is generated. ** El switch permite conexiones remotas sólo después de que un nuevo par de claves RSA se genera. 31 31 How can the SSID for a wireless network connection be verified? ¿Cómo puede el SSID de una conexión de red inalámbrica se verificará? From the Network Connections menu, choose Add Wireless Network. En el menú Conexiones de red, elija Agregar red inalámbrica. From the Network Connections menu, choose Properties. En el menú Conexiones de red, seleccione Propiedades. **From the Network Connections menu, choose View Wireless Network. ** En el menú Conexiones de red, seleccione Ver redes inalámbricas. From the Network Connections menu, choose Support. En el menú Conexiones de red, seleccione Ayuda.

32 32 In which mode is a VTP switch operating if it has been configured to only forward VTP advertisements? ¿En qué modo es un interruptor de VTP operativo si se ha configurado para reenviar sólo anuncios VTP? client cliente root la raíz server servidor **transparent ** Transparente nontransparent no transparente

33 33 Refer to the exhibit. Refiérase a la exposición. Two Catalyst switches are connected, and both switches have ports configured for VLANs 40 and 50 as shown. Dos switches Catalyst están conectados, y los dos conmutadores tienen puertos configurados para la VLAN 40 y 50 como se muestra. What will allow hosts on the same VLAN to communicate with one another across the different switches? ¿Qué va a permitir que las máquinas de la misma VLAN para comunicarse entre sí a través de los interruptores diferentes? **trunking ** Trunking STP STP VTP VTP routing enrutamiento

34 34 Which statement regarding the service password-encryption command is true? ¿Qué afirmación sobre el comando service password-encryption es cierto?

Page 12: CCNA 3 Final  V4-2 examenes

It is configured in privileged EXEC mode. Se configura en el modo EXEC privilegiado.

It encrypts only line mode passwords. Se cifra sólo contraseñas línea de modo. **As soon as the service password-encryption command is entered, all currently set passwords formerly displayed in plain text are encrypted. ** Tan pronto como el comando service password-encryption se introduce, en la actualidad todas las contraseñas establecidas anteriormente aparecen en formato de texto están encriptados. To see the passwords encrypted by the service password-encryption command in plain text, issue the no service password-encryption command. Para ver las contraseñas cifradas por el comando service password-encryption en texto sin formato, ejecute el comando service sin contraseña de cifrado.

35 35 Refer to the exhibit. Refiérase a la exposición. What does "FORWARDING" mean in the command output shown? ¿Qué significa "EXPEDICIÓN" significa en la salida del comando se muestra? The switch is receiving BPDUs, but not sending data frames. El interruptor está recibiendo BPDU, pero no el envío de tramas de datos. The switch is participating in an election process by forwarding the BPDUs it receives. El interruptor está participando en un proceso electoral mediante el envío de la BPDU que recibe. **The switch is sending and receiving data frames. ** El cambio es el envío y recepción de tramas de datos. The switch is receiving BPDUs and populating the MAC address table, but not sending data. El conmutador recibe BPDU y llenar la tabla de direcciones MAC, pero no el envío de datos.

36 36 Why is it important that the network administrator consider the spanning-tree network diameter when choosing the root bridge? ¿Por qué es importante que el administrador de la red considerar el diámetro de la red spanning-tree la hora de elegir el puente raíz? The cabling distance between the switches is 100 meters. La distancia de cableado entre los switches es de 100 metros. The network diameter limitation is 9. La limitación de diámetro de la red es de 9. Convergence is slower as the BPDU travels away from the root. La convergencia es más lenta que el BPDU viaja lejos de la raíz. **BPDUs may be discarded because of expiring timers. ** BPDUs puede ser descartado debido a que expira temporizadores.

37 37 Refer to the exhibit. Refiérase a la exposición. Hosts PC_A and PC_B send traffic simultaneously, and the frames from the transmitting stations collide. Ejércitos PC_A y PC_B enviar tráfico al mismo tiempo, y los marcos de la colisión las estaciones transmisoras. How far is the collision propagated? ¿A qué distancia está la colisión propaga? hub HB1 centro HB1 **switch SW1 ** SW1 switch SW2 interruptor SW2 router R1 router R1 router R2 Router R2

Page 13: CCNA 3 Final  V4-2 examenes

38 38 Which method establishes an administrative connection to the wireless access point? ¿Qué método establece una conexión administrativa hasta el punto de acceso inalámbrico? Associate with the access point and then open a HyperTerminal session with the access point. Asociado con el punto de acceso ya continuación, abra una sesión de HyperTerminal con el punto de acceso. Physically connect to the access point and then reboot the computer to launch the configuration software. Conecte físicamente al punto de acceso ya continuación, reinicie el equipo para iniciar el software de configuración. **From a computer in the same IP subnet as the access point, enter the default IP address of the access point in a web browser. ** Desde un ordenador en la misma subred IP que el punto de acceso, escriba la dirección IP por defecto del punto de acceso en un navegador web. Modify the TCP/IP properties of the computer connected to the access point so that it exists on the same network, and then reboot your computer to establish a connection. Modificar las propiedades TCP / IP de la computadora conectada al punto de acceso para que exista en la misma red, y luego reiniciar el equipo para establecer una conexión.

39 39 Refer to the exhibit. Refiérase a la exposición. All the VLANs configured on S2 are present on S1 but not S3. Todas las redes VLAN configuradas en S2 están presentes en S1 S3, pero no. All switches are set to VTP server mode and have identical VTP domain names configured. Todos los interruptores están en el modo de servidor VTP y tienen los mismos nombres de dominio VTP configurado. What is the likely problem? ¿Cuál es el problema más probable? **The connection from S1 to S3 is not trunking. ** La conexión desde S1 a S3 no es de trunking. S3 does not have a management VLAN configured. S3 no tiene una VLAN de administración configurado. The VLAN 99 interface on S3 is in a different subnet than S1 and S2. La interfaz VLAN 99 en S3 se encuentra en una subred diferente a la S1 y S2. S3 was joined to the network with a lower revision number than S1. S3 se unió a la red con un número de revisión inferiores a S1.

40 40 Refer to the exhibit. Refiérase a la exposición. All devices in the network are interconnected via trunk links with VTP pruning enabled on all three switches. Todos los dispositivos de la red están interconectados a través de enlaces troncales con la depuración VTP habilitada en los tres interruptores. Which VLANs will be pruned from switch SW3? Que las VLAN se podan de interruptor SW3? **VLAN 10 and VLAN 20 ** VLAN 10 y VLAN 20 VLAN 1, VLAN 10, and VLAN 20 Una VLAN, VLAN 10 y VLAN 20 VLAN 1, VLAN 1002 through 1005 Una VLAN, VLAN 1002 a través de 1005 VLAN 1, VLAN 10, VLAN 20, VLAN 1002 through 1005 Una VLAN, VLAN 10, 20 VLAN, VLAN 1002 a través de 1005

41 41

Page 14: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. A packet is received on the FastEthernet 0/1 physical interface from VLAN 1. Un paquete es recibido en la FastEthernet 0 / 1 interfaz física de la VLAN 1. The packet destination address is 192.168.1.85. La dirección de destino del paquete es 192.168.1.85. What will the router do with this packet? ¿Qué hará el router con este paquete? The router will ignore the packet because the source and destination are on the same broadcast domain. El router ignora el paquete porque el origen y destino están en el mismo dominio de broadcast. The router will forward the packet out interface FastEthernet 0/1.1. El router enviará el paquete a la interfaz FastEthernet 0/1.1. **The router will forward the packet out interface FastEthernet 0/1.2. ** El router enviará el paquete a la interfaz FastEthernet 0/1.2. The router will forward the packet out interface FastEthernet 0/1.3. El router enviará el paquete a la interfaz FastEthernet 0/1.3. The router will drop the packet since no network that includes the source address is attached to the router. El router desechará el paquete ya que no hay una red que incluye la dirección de origen es conectado al router.

42 42 Refer to the exhibit. Refiérase a la exposición. Switch SW2 was tested in a lab environment and then inserted into a production network without reloading its configuration. Switch SW2 fue probado en un entorno de laboratorio y luego se inserta en una red de producción sin tener que recargar su configuración. After the trunk link between SW1 and SW2 was brought up, all users lost connectivity to the network. Después de que el enlace troncal entre el SW1 y SW2 se crió, todos los usuarios pierden la conectividad a la red. What could be the source of the problem? ¿Cuál podría ser la fuente del problema? **The newly inserted switch has a higher VTP server revision number, which caused the VLAN information in the VTP domain to be deleted. ** El cambio recién incorporado tiene un servidor de mayor número de revisión VTP, que causó la información de la VLAN en el dominio VTP se va a eliminar. The newly inserted switch has pruning enabled, which causes pruning of all VLANs from the trunk port. El interruptor se acaba de insertar la poda ha permitido, lo que hace la poda de todas las VLAN del puerto troncal. The newly inserted switch received more VLANs from a connected switch than the switch can support. El interruptor se acaba de insertar recibió más VLAN desde un switch conectado que el interruptor puede soportar. Switches can exchange VTP information only through an access link. Interruptores pueden intercambiar información VTP sólo a través de un enlace de acceso.

43 43 Refer to the exhibit. Refiérase a la exposición. What is the consequence if SW1 port F0/0 is configured as an edge port? ¿Cuál es la consecuencia si SW1 puerto F0 / 0 está configurado como un puerto de borde? SW1 port F0/0 transitions to the learning state. SW1 puerto F0 / 0 pase al estado de aprendizaje. **SW1 port F0/0 can generate a temporary loop while in the sync state. ** SW1 puerto F0 / 0 puede generar un bucle temporal en el estado de sincronización. SW1 port F0/0 becomes a non-designated port. SW1 puerto F0 / 0 se convierte en un puerto no designado.

Page 15: CCNA 3 Final  V4-2 examenes

SW1 port F0/2 no longer passes BPDUs to SW4. SW1 puerto F0 / 2 ya no pasa BPDU a SW4. SW4 port F0/10 is forced into the blocking state. F0/10 SW4 puerto es forzado en el estado de bloqueo.

44 44 Refer to the exhibit. Refiérase a la exposición. An Ethernet switch has developed the CAM table shown. Un switch Ethernet ha desarrollado la tabla CAM se muestra. What action will the switch take when it receives the frame shown at the bottom of the exhibit? ¿Qué medidas piensa adoptar el interruptor cuando se recibe la trama se muestra en la parte inferior de la exposición? **forward the frame out all interfaces except Interface3 ** Adelante la trama a todas las interfaces excepto Interfaz3 add station 00-00-3D-1F-11-05 to Interface2 in the forwarding table agregar la estación 00-00-3D-1F-11-05 a Interfaz2 en la tabla de reenvío forward the frame out Interface3 adelante la trama Interfaz3 discard the frame descartar el marco de forward the frame out all interfaces adelante la trama a todas las interfaces forward the frame out Interface2 adelante la trama Interfaz2

45 45 Power over Ethernet (PoE) allows the switch to provide power to which two types of devices? Power over Ethernet (PoE) permite que el interruptor para proporcionar energía a la que dos tipos de dispositivos? (Choose two.) (Elija dos.) printer impresora **wireless access points ** Los puntos de acceso inalámbrico desktop PC PC de escritorio **IP phones ** Teléfonos IP Scanners Escáneres

46 46 Refer to the exhibit. Refiérase a la exposición. Three new VLANs have been configured to improve the performance of the network. Tres nuevas redes VLAN se han configurado para mejorar el rendimiento de la red. Host A would like to send a frame destined to Host B. Which statement is true about the process of sending the frame? El host A quiere enviar una trama destinada a Host B. ¿Qué afirmación es cierta sobre el proceso de envío de la trama? Host A sends an ARP request to the default gateway configured for VLAN10 to resolve destination MAC to IP address mapping. Host A envía una petición ARP a la puerta de enlace predeterminada configurada para VLAN10 para resolver MAC de destino de asignación de dirección IP. Then the frame is sent to switch SW1 only to switch the traffic to Host B. A continuación, el marco se envía al interruptor SW1 sólo para cambiar el tráfico al host B. **Host A sends an ARP request to the default gateway for VLAN10 to resolve destination MAC to IP address mapping. ** El host A envía una petición ARP a la puerta de enlace predeterminada para VLAN10 para resolver MAC de destino de asignación de dirección IP. Then the frame is sent to router R1 to route the traffic to the appropriate VLAN. A continuación, el marco se envía al router R1 para enrutar el tráfico a la VLAN adecuada. Host A broadcasts an ARP request to the members of all VLANs. El host A transmite

Page 16: CCNA 3 Final  V4-2 examenes

una petición ARP a los miembros de todas las VLAN. If none of the hosts replies with a corresponding IP address, the frame is dropped. Si ninguno de los anfitriones responde con una dirección IP correspondiente, el marco se ha caído. Because Host A and Host B are connected to the same switch SW1, Host A forwards the frame to Host B directly. Debido a que el Host A y Host B están conectados al mismo conmutador SW1, el host A envía la trama al host B directamente.

47 47 Which command finds the next available parameter for the SwitchX# clock command with the fewest keystrokes? ¿Qué comando se encuentra el siguiente parámetro para el comando # SwitchX reloj con el menor número de golpes de teclado? SwitchX# clock? SwitchX # reloj? SwitchX# clock then Tab SwitchX # reloj a continuación, la ficha SwitchX# clock then Ctrl-P SwitchX # reloj a continuación, Ctrl-P **SwitchX# clock ? ** SwitchX # reloj? SwitchX# clock then "help" SwitchX reloj # entonces "ayuda"

48 48 Which three statements are true regarding router-on-a-stick inter-VLAN routing? ¿Qué tres afirmaciones son ciertas con respecto a router-on-a-stick enrutamiento entre VLAN? (Choose three.) (Elija tres.) makes troubleshooting the inter-VLAN routing configuration much less complex than when using multiple physical interface hace que la configuración de la solución de problemas inter-VLAN mucho menos compleja que cuando se utiliza la interfaz física múltiples **requires the use of subinterfaces on the router ** Requiere el uso de subinterfaces en el router requires each subinterface to be configured with the no shut command requiere que cada subinterfaz se configura con el comando no cierra **can impact performance if many VLANs compete for bandwidth on a single router interface ** Puede afectar al rendimiento si VLAN muchos compiten por el ancho de banda en una sola interfaz del router requires an access link between the router and Layer 2 switch requiere un enlace de acceso entre el router y el switch de capa 2 **more cost-efficient and scalable than using multiple physical interfaces ** Más rentable y escalable que el uso de múltiples interfaces físicas

49 49 Refer to the exhibit. Refiérase a la exposición. Two switches, SW1 and SW2, are interconnected via a trunk link. Dos interruptores, SW1 y SW2, están interconectados a través de un enlace troncal. Host A is on the native VLAN. El host A está en la VLAN nativa. How does untagged traffic coming from Host A traverse the trunk link? ¿Cómo funciona el tráfico sin etiquetar procedentes de host A recorrer el enlace troncal? SW1 tags the traffic with the lowest VLAN ID value and forwards it over the trunk link. SW1 etiqueta el tráfico con el menor valor de ID de VLAN y la envía por el enlace troncal. SW1 tags the traffic with the highest VLAN ID value and forwards it over the trunk link. SW1 etiqueta el tráfico con el mayor valor de ID de VLAN y la envía por el enlace troncal. **The untagged traffic is forwarded as part of the native VLAN. ** El tráfico sin

Page 17: CCNA 3 Final  V4-2 examenes

etiquetar se envía como parte de la VLAN nativa. The untagged traffic is dropped because the trunk forwards only tagged frames. El tráfico sin etiquetar se deja caer el tronco hacia delante, porque sólo 'a cuadros. SW1 encapsulates the traffic with 802.1p encapsulation and forwards it over the trunk link. SW1 encapsula el tráfico con la encapsulación 802.1p y lo reenvía a través del enlace troncal. SW1 encapsulates the traffic with 802.1Q encapsulation and forwards it over the trunk link. SW1 encapsula el tráfico con la encapsulación 802.1Q y lo reenvía a través del enlace troncal.

50 50 Refer to the exhibit. Refiérase a la exposición. What encryption algorithm does the 802.11i standard employ for data encryption? ¿Qué hace el algoritmo de cifrado estándar 802.11i emplean para el cifrado de datos? PSK PSK TKIP TKIP WEP WEP **AES ** AES

51 51 A network administrator is tasked to select hardware to support a large enterprise, switched network. Un administrador de red tiene la tarea de seleccionar hardware para soportar una gran empresa, red de conmutación. The system requires redundant backplane interconnections between eight high port density switches. El sistema requiere interconexiones redundantes backplane de ocho switches de alta densidad de puertos. Which hardware solution would be appropriate for this enterprise? ¿Qué hardware solución sería apropiado para esta empresa? modular switches switches modulares fixed configuration switches conmutadores de configuración fija **stackable switches ** Switches apilables uplink capable switches enlace ascendente interruptores capaces link aggregated switches enlace agregado interruptores

52 52 Refer to the exhibit. Refiérase a la exposición. Which switch will be elected as the root bridge of the spanning tree topology? Cuál de los switches será elegido como el puente raíz de la topología de árbol de expansión? **Cat-A ** Cat-A Cat-B Cat-B Cat-C Cat-C Cat-D Cat-D

53 53 What two methods can be used to remove MAC address table entries from a switch? ¿Qué dos métodos se pueden utilizar para quitar entradas de la tabla de direcciones MAC de un switch? (Choose two.) (Elija dos.) **Power cycle the switch to clear all dynamically learned addresses. ** ciclo de encender el switch para borrar todas las direcciones obtenidas dinámicamente. The clear switching-tables command will remove statically configured entries. El comando de conmutación claro mesas quitará las entradas configuradas estáticamente.

Page 18: CCNA 3 Final  V4-2 examenes

**The clear mac-address-table command will remove statically and dynamically configured table entries. ** El comando clear mac-address-table quitará estática y dinámicamente configurado entradas de la tabla. The erase flash command will clear all statically configured table entries. El comando de borrado de flash se borrarán todas las entradas de la tabla configuradas estáticamente.

Statically configured MAC addresses will automatically be removed from the address table 300 minutes after the last activity on a switch port. Configurado estáticamente las direcciones MAC será automáticamente eliminado de la tabla de direcciones 300 minutos después de la última actividad en un puerto de switch.

54 54 Which three statements are correct concerning the default configuration of a new switch? ¿Qué tres afirmaciones son correctas, relativa a la configuración por defecto de un nuevo switch? (Choose three.) (Elija tres.) VLAN1 is configured with a management IP address. VLAN1 se configura con una dirección de gestión de la PI. **All switch ports are assigned to VLAN1. ** Todos los puertos de switch se asignan a la VLAN1. Spanning Tree Protocol is disabled. Protocolo Spanning Tree se desactiva. **All interfaces are set to auto. ** Todas las interfaces se establecen en auto. Enable password is configured as cisco. Habilitar contraseña se configura como cisco. **The flash directory contains the IOS image. ** El directorio flash contiene la imagen del IOS.

55 55 An access point supports both the 802.11g and 802.11b standards. Un punto de acceso soporta los estándares 802.11gy 802.11b. A device that supports only 802.11b attempts to connect to the access point. Un dispositivo que sólo es compatible con 802.11b intenta conectarse al punto de acceso. What happens to the connection? ¿Qué sucede con la conexión? The network does not connect unless the user is within line of sight of the access point. La red no se conecta a menos que el usuario está dentro de la línea de visión del punto de acceso. **The access point and all other connected users defer to the 802.11b standard. ** El punto de acceso y todos los usuarios conectados otros aplazar hasta el estándar 802.11b.

The access point always maintains the higher standard and automatically upgrades the 802.11b device to the 802.11g speed. El punto de acceso siempre mantiene las mejoras de mayor nivel y de forma automática el dispositivo 802.11b a la velocidad de 802.11g. Each user gets the speed supported by the wireless NIC on their mobile device. Cada usuario obtiene la velocidad con el apoyo de la tarjeta de red inalámbrica en su dispositivo móvil.

56 56 Refer to the exhibit. Refiérase a la exposición. The hosts connected to switch SW1 are not able to communicate with the hosts in the same VLANs connected to switch SW2. Los anfitriones conectado con el interruptor SW1 no son capaces de comunicarse con los anfitriones en las mismas VLAN conectado con el interruptor SW2. What should be done to fix the problem? ¿Qué debe hacerse para solucionar el problema?

Page 19: CCNA 3 Final  V4-2 examenes

Introduce a Layer 3 device or a switch with Layer 3 capability in the topology. Introducir un dispositivo de capa 3 o un switch con capacidad de Capa 3 en la topología.

**Reconfigure the trunk port on switch SW2 with static trunk configuration. ** Volver a configurar el puerto de tronco en el interruptor SW2 con la configuración del tronco estático. Configure VLANs with different VLAN IDs on switch SW2. Configurar redes VLAN con diferentes ID de VLAN en el interruptor SW2. Trunk mode can be configured on Gigabit Ethernet interfaces only. modo de maletero se puede configurar en interfaces Gigabit Ethernet solamente.

57 57 What two tasks must be performed when deleting an entire VLAN? ¿Qué dos tareas se deben realizar cuando se elimina toda una VLAN? (Choose two.) (Elija dos.) Delete the vlan.dat file from flash. Elimine el archivo vlan.dat de la memoria flash. Reboot the switch in order for the changes to take effect. Reinicie el switch para que los cambios surtan efecto. **Use the negative form of the command that was used to create the VLAN. ** Utilice la forma negativa del comando que se utilizó para crear la VLAN. **Reassign the switch ports from the deleted VLAN to other VLANs if they are to be used. ** Reasignar los puertos del switch de la VLAN borrado con otras VLAN si se van a utilizar. Use the erase vlan command in global configuration mode. Utilice el comando borrar vlan en el modo de configuración global.

58 58 How does an Ethernet switch handle traffic if the shared memory buffers and the port memory buffers are full? ¿Cómo funciona un interruptor de Ethernet de manejar el tráfico si los buffers de memoria compartida y los buffers de memoria del puerto están llenos? The switch allocates additional buffers in NVRAM. El interruptor asigna búferes adicionales en la NVRAM. The switch defragments the frame and stores it in NVRAM. El interruptor desfragmenta el marco y la almacena en la NVRAM. The switch routes the packet to the destination port. El pulsador el paquete al puerto de destino. **The switch drops the traffic. ** El switch descarta el tráfico. Labels: CCNA 3 , CCNA 3 Final 1 V4.0 Etiquetas: CCNA 3 , CCNA Final 3 1 V4.0

Page 20: CCNA 3 Final  V4-2 examenes

CCNA 3 Final 2 V4.0 Final CCNA 3 2 V4.0 Posted by CCNA Exam at 8:17 PM | Monday, April 27, 2009 Publicado por el examen CCNA en 20:17 | Lunes, 27 de abril 2009

1 1

Refer to the exhibit. Refiérase a la exposición. The network administrator needs to setup Switch1 for remote access from HostA. El administrador de red necesita configurar Switch1 para el acceso remoto desde el HostA. The show ip interface brief is issued on Router1 and the show interfaces trunk command is issued on the Switch1 to verify the current status. El show ip interface brief se emite en Router1 y el comando show interfaces tronco se expide sobre la Switch1 para verificar el estado actual. The administrator applies the additional configuration shown in the exhibit to Switch1. El administrador se aplica la configuración adicional se muestra en la exposición a Switch1. However, the telnet from HostA fails. Sin embargo, el telnet desde HostA falla. What additional commands need to be applied ¿Qué comandos adicionales se deben aplicar to the switch? para el cambio?

Switch(config)# interface vlan 1 Switch (config) # interface vlan 1 Switch(config-if)# ip address 10.1.1.250 255.255.255.0 Switch (config-if) # ip address 10.1.1.250 255.255.255.0 Switch(config-if)# no shutdown Switch (config-if) # no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 Switch (config-if) # ip default-gateway 10.1.10.254

Switch(config)# interface vlan 1 Switch (config) # interface vlan 1 Switch(config-if)# ip address 10.1.50.250 255.255.255.0 Switch (config-if) # ip address 255.255.255.0 10.1.50.250 Switch(config-if)# no shutdown Switch (config-if) # no shutdown Switch(config-if)# ip default-gateway 10.1.50.254 Switch (config-if) # ip default-gateway 10.1.50.254

Page 21: CCNA 3 Final  V4-2 examenes

Switch(config)# interface vlan 10 Switch (config) # interface vlan 10 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch (config-if) # ip address 255.255.255.0 10.1.10.250 Switch(config-if)# no shutdown Switch (config-if) # no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 Switch (config-if) # ip default-gateway 10.1.10.254

**Switch(config)# interface vlan 10 ** Switch (config) # interface vlan 10 Switch(config-if)# ip address 10.1.1.250 255.255.255.0 Switch (config-if) # ip address 10.1.1.250 255.255.255.0 Switch(config-if)# no shutdown Switch (config-if) # no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 Switch (config-if) # ip default-gateway 10.1.10.254

Switch(config)# interface vlan 50 Switch (config) # interface vlan 50 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch (config-if) # ip address 255.255.255.0 10.1.10.250 Switch(config-if)# no shutdown Switch (config-if) # no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 Switch (config-if) # ip default-gateway 10.1.10.254

2 2

Refer to the exhibit. Refiérase a la exposición. On the basis of the configuration shown, how will an Ethernet frame on port GigabitEthernet0/1 be modified? Sobre la base de la configuración que se muestra, cómo un marco de Ethernet en el puerto GigabitEthernet0 / 1 modificarse?

802.1Q encapsulation prepends a 4-byte tag field in front of the original Ethernet frame and recomputes the frame check sequence (FCS) on the modified frame. encapsulación 802.1Q antepone un campo de etiquetas de 4 bytes en frente de la trama Ethernet original y vuelve a calcular la secuencia de verificación de trama (FCS) en el marco modificado.

Page 22: CCNA 3 Final  V4-2 examenes

**802.1Q encapsulation inserts a 4-byte tag field into the original Ethernet frame between the source address and type/length fields and recomputes the frame check sequence (FCS) on the modified frame. ** Encapsulación 802.1Q inserta un byte de etiqueta de campo-4 en el marco original de Ethernet entre la dirección de origen y el tipo o los campos y vuelve a calcular la longitud de la secuencia de verificación de trama (FCS) en el marco modificado. 802.1Q encapsulation prepends an 802.1p field in front of the original Ethernet frame and recomputes the frame check sequence (FCS) on the modified frame. encapsulación 802.1Q antepone un campo 802.1p en frente de la trama Ethernet original y vuelve a calcular la secuencia de verificación de trama (FCS) en el marco modificado. 802.1Q encapsulation inserts an 802.1p field into the original Ethernet frame between the source address and type/length fields and recomputes the frame check sequence (FCS) on the modified frame. inserta la encapsulación 802.1Q un campo 802.1p en la trama Ethernet original entre la dirección de origen y el tipo o los campos y vuelve a calcular la longitud de la secuencia de verificación de trama (FCS) en el marco modificado.

3 3 What VLANs are allowed across a trunk when the range of allowed VLANs is set to the default value? ¿Qué VLAN se permite a través de un tronco cuando el rango de VLAN permitido se establece en el valor predeterminado? **All VLANs will be allowed across the trunk. ** Todas las VLAN se permitirá en todo el tronco. Only VLAN 1 will be allowed across the trunk. Sólo una VLAN se permitirá en todo el tronco. Only the native VLAN will be allowed across the trunk. Sólo la VLAN nativa se permitirá en todo el tronco. The switches will negotiate via VTP which VLANs to allow across the trunk. Los interruptores se negocian a través de VTP VLAN para permitir que todo el tronco.

4 4 Which parameter is used to uniquely identify one wireless network from another? El parámetro que se utiliza para identificar de forma única una red inalámbrica de otro? SSID SSID OFDM OFDM WEP WEP DSSS DSSS

5 5

Page 23: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. What is the consequence if SW1 port F0/1 is configured as an edge port? ¿Cuál es la consecuencia si SW1 puerto F0 / 1 se configura como un puerto de borde?

SW1 port F0/1 transitions to the learning state. SW1 puerto F0 / 1 pase al estado de aprendizaje. SW1 port F0/1 can generate a temporary loop. Puerto F0 SW1 / 1 puede generar un bucle temporal. SW1 port F0/1 becomes a non-designated port. SW1 puerto F0 / 1 se convierte en un puerto no designado. SW1 port F0/2 no longer passes BPDUs to SW4. SW1 puerto F0 / 2 ya no pasa BPDU a SW4.

6 6

Page 24: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. What will allow a host on VLAN 40 on switch X to communicate with a host in VLAN 40 on switch Y? ¿Qué va a permitir que un host de la VLAN 40 en el interruptor X para comunicarse con un host de la VLAN 40 en el interruptor S?

QoS Calidad de servicio routing enrutamiento trunking trunking VPN VPN

7 7

Page 25: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Spanning-tree port priorities are 128 for all interfaces. prioridades spanning-tree puerto son de 128 para todas las interfaces. The network administrator enters the spanning-tree vlan 1 root primary command on S4. El administrador de la red entra en la VLAN spanning-tree un comando de la raíz primaria de S4. Which two port results are correct? Cuáles son los dos resultados puerto son correctos? (Choose two.) (Elija dos.)

S1 Gi0/1 becomes a root port. S1 Gi0 / 1 se convierte en un puerto raíz. S2 Gi0/2 becomes a non-designated port. S2 Gi0 / 2 se convierte en un puerto no designado. S3 Gi0/1 becomes a non-designated port. Gi0 S3 / 1 se convierte en un puerto no designado. S4 Gi0/1 becomes a root port. S4 Gi0 / 1 se convierte en un puerto raíz. S4 Gi0/2 becomes a designated port. S4 Gi0 / 2 se convierte en un puerto designado.

8 8

Page 26: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Which two facts can be confirmed by this output? ¿Qué dos hechos se puede confirmar por esta salida? (Choose two.) (Elija dos.)

This switch shows no configuration revision errors. Este interruptor no muestra los errores de revisión de configuración. This switch has established two-way communication with the neighboring devices. Este interruptor ha establecido comunicación bidireccional con los dispositivos vecinos. This switch is configured to advertise its VLAN configuration to other VTP-enabled switches in the same VTP domain. Este interruptor está configurado para anunciar su configuración VLAN a VTP habilitada para otros switches en el mismo dominio VTP. This switch will drop all VTP advertisements that come from the switches that are configured in the same VTP domain. Este interruptor se retiren todos los anuncios VTP que vienen de los interruptores que están configurados en el mismo dominio VTP. This switch will cause no disruption in the VTP domain operations if the rest of the switches in the same VTP domain have a higher configuration revision number. Esta función hará que no hay interrupción en las operaciones de dominio VTP si el resto de los interruptores en el mismo dominio VTP tiene un número de revisión de configuración más alta.

9 9

Refer to the exhibit. Refiérase a la exposición. R1 is configured for traditional inter-VLAN routing. R1 se configura para el tradicional enrutamiento entre VLAN. R1 can ping computer 3 but cannot ping computer 1. R1 puede hacer ping a 3 de la computadora, pero no puede hacer ping a un equipo. What is a possible cause for this failure? ¿Cuál es una posible causa de este fracaso?

S1 port Fa0/11 is in the wrong VLAN. S1 puerto Fa0/11 está en la VLAN mal. R1 does not have an active routing protocol. R1 no tiene un protocolo de enrutamiento

Page 27: CCNA 3 Final  V4-2 examenes

activa. The IP address of computer 1 is in the wrong logical network. La dirección IP del equipo 1 se encuentra en la red lógica equivocada. Router interface Fa0/0 has the wrong trunk encapsulation type configured. Interfaz del router Fa0 / 0 tiene el tipo de encapsulación tronco mal configurado.

10 10

Page 28: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Both switches are interconnected via a trunk link. Ambos interruptores están interconectados a través de un enlace troncal. Host A and host B are on the default VLAN but are not able to exchange traffic. El host A y el host B está en la VLAN por defecto, pero no son capaces de intercambio de tráfico. What should be done to fix the problem? ¿Qué debe hacerse para solucionar el problema?

Allow all VLANs on the trunk link. Permita que todas las VLAN en el enlace troncal. Remove the native VLAN from the trunk. Retire la VLAN nativa del tronco. Include a router or switch with Layer 3 capabilities. Incluye un router o switch de nivel 3 con capacidades. Configure the same native VLAN on both ends of the trunk. Configure la misma VLAN nativa en ambos extremos del tronco.

11 11

Page 29: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. The hosts connected to switch SW1 are not able to communicate with the hosts in the same VLANs connected to switch SW2. Los anfitriones conectado con el interruptor SW1 no son capaces de comunicarse con los anfitriones en las mismas VLAN conectado con el interruptor SW2. What should be done to fix the problem? ¿Qué debe hacerse para solucionar el problema?

Configure VLANs with different VLAN IDs on switch SW2. Configurar redes VLAN con diferentes ID de VLAN en el interruptor SW2. Reconfigure the trunk port on switch SW2 with static trunk configuration. Vuelva a configurar el puerto de tronco en el interruptor SW2 con la configuración del tronco estático. Introduce a Layer 3 device or a switch with Layer 3 capability in the topology. Introducir un dispositivo de capa 3 o un switch con capacidad de Capa 3 en la topología.

Apply IP addresses that are in the same subnet to the interfaces used to connect SW1 and SW2. Aplicar las direcciones IP que están en la misma subred a las interfaces para conectar SW1 y SW2.

12 12 What happens when the crypto key zeroize rsa command is entered on a switch configured with the transport input ssh command on the vty lines? ¿Qué sucede cuando la tecla de comando de cifrado RSA zeroize se introduce en un switch configurado con el comando ssh de transporte de entrada en las líneas vty?

A new RSA key pair is created. Un nuevo par de claves RSA se crea. The switch defaults to allowing Telnet connections only. Los valores por defecto cambiar al permitir conexiones Telnet solamente. The switch is no longer able to make SSH connections as an SSH client. El interruptor no es capaz de hacer conexiones SSH como un cliente SSH. The switch allows remote connections only after a new RSA key pair is generated. El switch permite conexiones remotas sólo después de que un nuevo par de claves RSA se genera.

13 13

Page 30: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. An Ethernet switch has developed the CAM table shown. Un switch Ethernet ha desarrollado la tabla CAM se muestra. What action will the switch take when it receives the frame shown at the bottom of the exhibit? ¿Qué medidas piensa adoptar el interruptor cuando se recibe la trama se muestra en la parte inferior de la exposición?

forward the frame out all interfaces except Interface3 adelante la trama a todas las interfaces excepto Interfaz3 add station 00-00-3D-1F-11-05 to Interface2 in the forwarding table agregar la estación 00-00-3D-1F-11-05 a Interfaz2 en la tabla de reenvío forward the frame out Interface3 adelante la trama Interfaz3 discard the frame descartar el marco de forward the frame out all interfaces adelante la trama a todas las interfaces forward the frame out Interface2 adelante la trama Interfaz2

14 14 Which two statements describe Spanning Tree Protocol? ¿Qué dos afirmaciones describen Protocolo Spanning Tree? (Choose two.) (Elija dos.)

It eliminates Layer 2 loops in network topologies. Se elimina la capa 2 bucles en topologías de red. It eliminates the need for redundant physical paths in network topologies. Elimina la necesidad de rutas físicas redundantes en topologías de red. It can only be used in networks in which Layer 2 switching is in use. Sólo puede ser utilizado en redes de conmutación de nivel 2 que está en uso. It can only be used in networks where both routers and switches are used together. Sólo puede ser utilizado en redes en las que ambos routers y conmutadores se utilizan juntos.

Page 31: CCNA 3 Final  V4-2 examenes

It can only be used in networks where routers are installed. Sólo puede ser utilizado en redes en las que los routers están instalados.

15 15

Refer to the exhibit. Refiérase a la exposición. A new host needs to be connected to VLAN 1. Un nuevo huésped debe estar conectado a la VLAN 1. Which IP addresses should be assigned to this new host? ¿Qué direcciones IP deben ser asignados a este nuevo host?

192.168.1.11 /28 192.168.1.11 / 28 192.168.1.22 /28 192.168.1.22 / 28 192.168.1.33 /28 192.168.1.33 / 28 192.168.1.44 /28 192.168.1.44 / 28 192.168.1.55 /28 192.168.1.55 / 28

16 16

Page 32: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. How does SW1 manage traffic coming from Host A? ¿Cómo SW1 gestionar el tráfico que viene desde el Host A?

SW1 drops the traffic because it is untagged. SW1 descarta el tráfico, ya que es sin etiquetar. SW1 leaves the traffic untagged and forwards it over the trunk. SW1 deja el tráfico sin etiqueta y la envía sobre el tronco.

Page 33: CCNA 3 Final  V4-2 examenes

SW1 tags the traffic with the lowest VLAN ID value and forwards it over the trunk link. SW1 etiqueta el tráfico con el menor valor de ID de VLAN y la envía por el enlace troncal. SW1 encapsulates the traffic with 802.1Q encapsulation and forwards it over the trunk link. SW1 encapsula el tráfico con la encapsulación 802.1Q y lo reenvía a través del enlace troncal.

17 17 [No Image] [No Image] Refer to the exhibit. Refiérase a la exposición. The switches are configured for VTP as shown. Los conmutadores están configurados para VTP como se muestra. Which two statements correctly describe the operation of these switches? ¿Qué dos afirmaciones describen correctamente la operación de estos interruptores? (Choose two.) (Elija dos.)

A new VLAN can be added to Switch1 and that information will be added only to Switch2. Una nueva VLAN se puede agregar a Switch1 y que la información se agregará sólo para Switch2. A new VLAN can be added to Switch1 and that information will be added to Switch2 and Switch4 Una nueva VLAN se puede agregar a Switch1 y que la información se añadirá a Switch2 y Switch4 An existing VLAN can be deleted from Switch4 and that VLAN will be deleted from Switch1 and Switch2 Una VLAN existentes se pueden eliminar de Switch4 VLAN y que se eliminará de Switch1 y Switch2 An existing VLAN can be deleted from Switch2 and that VLAN will be deleted from Switch1 and Switch4. Una VLAN existentes se pueden eliminar de Switch2 VLAN y que se eliminará de Switch1 y Switch4. A new VLAN can be added to Switch4 and that information will be added to Switch1, Switch2, and Switch3. Una nueva VLAN se puede agregar a Switch4 y que la información se añadirá a Switch1, Switch2 y switch3. A new VLAN can be added to Switch3 and that information will be added to Switch1, Switch2, and Switch4. Una nueva VLAN se puede agregar a switch3 y que la información se añadirá a Switch1, Switch2 y Switch4.

18 18

Page 34: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Computer A sends a broadcast message. El equipo A envía un mensaje de difusión. Which devices will see the broadcast? ¿Qué dispositivos se verá la emisión?

computer B el equipo B computer B and Router1 el equipo B y el Router1 computer C and Router1 equipo C y Router1

Page 35: CCNA 3 Final  V4-2 examenes

computer B, computer D, computer E and Router1 el equipo B, equipo D, E y equipo Router1 computer B, computer C, computer D, computer E and Router1 el equipo B, equipo C, equipo D, E y equipo Router1 computer A, computer B, computer C, computer D, computer E and Router1 el equipo A, el equipo B, equipo C, equipo D, E y equipo Router1

19 19

Refer to the exhibit. Refiérase a la exposición. The network administrator enters the configuration shown to allow both SSH and Telnet connections to the switch. El administrador de la red entra en la configuración que se muestra para permitir las conexiones SSH y Telnet al conmutador. The Telnet connections fail. Las conexiones de Telnet no. What is the most likely cause of this problem? ¿Cuál es la causa más probable de este problema?

The SSH version number is wrong. El número de versión SSH es incorrecto. SSH has been configured on the wrong line. SSH se ha configurado en la línea equivocada. Telnet and SSH cannot be configured simultaneously. Telnet y SSH no se puede configurar de forma simultánea. The transport input command is configured incorrectly. El comando de entrada de transporte no está configurado correctamente.

20 20

Page 36: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Which switch will be elected as the root bridge of the spanning tree topology? Cuál de los switches será elegido como el puente raíz de la topología de árbol de expansión? Cat-A Cat-A Cat-B Cat-B Cat-C Cat-C Cat-D Cat-D

21 21

Page 37: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. The switches in the exhibit have VTP pruning enabled. Los interruptores de la exhibición han depuración VTP habilitada. Which VLANs will be pruned from switch SW3? Que las VLAN se podan de interruptor SW3?

VLAN 10 and VLAN 20 VLAN 10 y VLAN 20 VLAN 1, VLAN 10, and VLAN 20 Una VLAN, VLAN 10 y VLAN 20 VLAN 1, VLAN 1002 through 1005 Una VLAN, VLAN 1002 a través de 1005 VLAN 1, VLAN 10, VLAN 20, VLAN 1002 through 1005 Una VLAN, VLAN 10, 20 VLAN, VLAN 1002 a través de 1005

22 22

Refer to the exhibit. Refiérase a la exposición. What does STATIC indicate in the output that is shown? ¿Qué ESTÁTICA indicar en la salida que se muestra?

The switch will not allow any other device to connect to port Fa0/15. El interruptor no permitirá que ningún otro dispositivo para conectarse a Fa0/15 puerto. Traffic destined for MAC address 0000.c123.5432 will be forwarded to Fa0/15. El tráfico destinado para la dirección MAC 0000.c123.5432 se remitirá al Fa0/15. This entry will be removed and refreshed every 300 seconds to keep it in the table. Esta

Page 38: CCNA 3 Final  V4-2 examenes

entrada se eliminará y actualiza cada 300 segundos para tener en la mesa. The switch learned this MAC address from the source address in a frame received on Fa0/15. El interruptor aprendido esta dirección MAC de la dirección de origen en un marco recibida el Fa0/15. When processing a frame, the switch does not have to perform a lookup to determine the final destination port. Al procesar un marco, el interruptor no tiene que realizar una búsqueda para determinar el puerto de destino final.

23 23 Which three statements are true regarding router-on-a-stick inter-VLAN routing? ¿Qué tres afirmaciones son ciertas con respecto a router-on-a-stick enrutamiento entre VLAN? (Choose three.) (Elija tres.)

requires the use of subinterfaces on the router requiere el uso de subinterfaces en el router requires an access link between the router and Layer 2 switch requiere un enlace de acceso entre el router y el switch de capa 2 more cost-efficient and scalable than using multiple physical interfaces más rentable y escalable que el uso de múltiples interfaces físicas requires each subinterface to be configured with the no shutdown command requiere que cada subinterfaz se configura con el comando no shutdown can impact performance if many VLANs compete for bandwidth on a single router interface puede afectar al rendimiento si VLAN muchos compiten por el ancho de banda en una sola interfaz del router makes troubleshooting the inter-VLAN routing configuration much less complex than when using multiple physical interfaces hace que la configuración de la solución de problemas inter-VLAN mucho menos compleja que cuando se utilizan múltiples interfaces físicas

24 24

Page 39: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Router RA receives a packet with a source address of 192.168.1.35 and a destination address of 192.168.1.85. AR router recibe un paquete con una dirección de origen de 192.168.1.35 y una dirección de destino de 192.168.1.85. What will the router do with this packet? ¿Qué hará el router con este paquete?

The router will forward the packet out interface FastEthernet 0/1.1. El router enviará el paquete a la interfaz FastEthernet 0/1.1. The router will forward the packet out interface FastEthernet 0/1.2. El router enviará el paquete a la interfaz FastEthernet 0/1.2. The router will forward the packet out interface FastEthernet 0/1.3. El router enviará el paquete a la interfaz FastEthernet 0/1.3. The router will forward the packet out interface FastEthernet 0/1.2 and interface FastEthernet 0/1.3. El router enviará el paquete a la interfaz FastEthernet 0/1.2 y la interfaz FastEthernet 0/1.3. The router will ignore the packet because the source and destination are on the same broadcast domain. El router ignora el paquete porque el origen y destino están en el mismo dominio de broadcast. The router will drop the packet since no network that includes the source address is attached to the router. El router desechará el paquete ya que no hay una red que incluye la dirección de origen es conectado al router.

25 25

Page 40: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. The network administrator needs to remove the east-hosts VLAN and use the switch port from that VLAN in one of the existing VLANs. El administrador de red tiene que eliminar la VLAN de este a los ejércitos y el uso del puerto del conmutador de esa VLAN en una de las VLAN existentes. What two commands should be used when completely removing VLAN 2 from S1-Central while leaving the switch and all its interfaces operational? ¿Qué dos comandos se debe utilizar cuando la eliminación total de VLAN 2 de S1-Central, dejando el interruptor y de funcionamiento todas sus interfaces? (Choose two.) (Elija dos.)

S1-Central# reload S1-Central # reload S1-Central# erase flash: S1-Central # borrar flash: S1-Central(config)# no vlan 2 S1-Central (config) # no vlan 2 S1-Central# delete flash:vlan.dat S1-Central # delete flash: vlan.dat S1-Central(config-if)# switchport access vlan 3 S1-Central (config-if) # vlan switchport de acceso 3

26 26

Refer to the exhibit. Refiérase a la exposición. What does "FORWARDING" mean in the command output shown? ¿Qué significa "EXPEDICIÓN" significa en la salida del comando se muestra?

The switch is sending and receiving data frames El interruptor es el envío y

Page 41: CCNA 3 Final  V4-2 examenes

recepción de tramas de datos The switch is receiving BPDUs, but not sending data frames. El interruptor está recibiendo BPDU, pero no el envío de tramas de datos. The switch is participating in an election process by forwarding the BPDUs it receives. El interruptor está participando en un proceso electoral mediante el envío de la BPDU que recibe. The switch is receiving BPDUs and populating the MAC address table, but not sending data. El conmutador recibe BPDU y llenar la tabla de direcciones MAC, pero no el envío de datos.

27 27

Page 42: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Switch SW2 has been newly purchased and added to the network. Switch SW2 ha sido recientemente adquirido y se añade a la red. What configuration should be applied to SW2 so that it participates in the same VTP domain as switch SW1, receives VLAN information from SW1, and synchronizes VLAN information? ¿Qué configuración se debe aplicar a SW2 para que participe en el mismo dominio VTP como interruptor SW1, recibe información de la VLAN de SW1, y sincroniza la información de VLAN?

Disable VTP pruning on SW2. Deshabilitar la depuración VTP en SW2. Configure SW2 in VTP transparent mode. Configurar el SW2 en modo VTP transparente. Configure SW2 with the VTP domain password. Configurar el SW2 con la contraseña de dominio VTP. Configure SW2 as a VTP server with a higher revision number. Configurar el SW2 como un servidor VTP con un número de revisión más alto.

28 28 What are three benefits of a hierarchical network model? ¿Qué son las tres ventajas de un modelo de red jerárquico? (Choose three.) (Elija tres.)

reduced contention for bandwidth afirmación de reducción de ancho de banda reduced size of the physical layout reducido tamaño de la distribución física increased fault tolerance of the network falta una mayor resistencia de la red elimination of the need for wiring closets eliminación de la necesidad de armarios de cableado elimination of the need for layer three functionality eliminación de la necesidad de la funcionalidad de tres capas simplification of management and troubleshooting simplificación de la gestión y solución de problemas

29 29

Page 43: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Which three options correctly identify information that could be associated with this output?(Choose three.) ¿Qué tres opciones de identificar correctamente la información que podría estar asociado con esta salida? (Elija tres.)

Interface FastEthernet3/0/0 is subinterfaced. Interfaz FastEthernet3/0/0 es subinterfaced.

Page 44: CCNA 3 Final  V4-2 examenes

A non-proprietary trunking protocol is in use. Un propietario de trunking protocolo no está en uso. The configuration is appropriate for a router-on-a-stick network design. La configuración es apropiada para un router-on-stick diseño de una red. A shutdown command has been applied to interface FastEthernet3/0/0. Un comando de cierre se ha aplicado a la interfaz FastEthernet3/0/0. Interface FastEthernet3/0/0.3 is mapped to the default management VLAN. Interfaz FastEthernet3/0/0.3 está asignado a la VLAN de administración por defecto. An IP address should be applied to FastEthernet3/0/0 for correct data routing. Una dirección IP se debe aplicar a FastEthernet3/0/0 de datos de enrutamiento correcta.

30 30

Refer to the exhibit. Refiérase a la exposición. Switch SW2 was tested in a lab environment and then inserted into a production network without reloading its configuration. Switch SW2 fue probado en un entorno de laboratorio y luego se inserta en una red de producción sin tener que recargar su configuración. After the trunk link between SW1 and SW2 was brought up, all users lost connectivity to the network. Después de que el enlace troncal entre el SW1 y SW2 se crió, todos los usuarios pierden la conectividad a la red. What could be the source of the problem? ¿Cuál podría ser la fuente del problema?

All the VLANs were pruned from the trunk port between SW1 and SW2. Todas las VLAN se podaron del puerto troncal entre SW1 y SW2. SW1 and SW2 cannot be both set as VTP servers in the same VTP domain. SW2 SW1 y no puede ser configurado como servidores VTP en el mismo dominio VTP. VTP configuration revision number of SW2 was higher than the configuration revision number of SW1. configuración VTP número de revisión de SW2 fue

Page 45: CCNA 3 Final  V4-2 examenes

mayor que el número de revisión de configuración de SW1. The additional VLANs from SW2 created more VLANs than the VLAN database of SW1 could contain. La VLAN adicional de SW2 creado más que la base de datos VLAN VLAN de SW1 puede contener.

31 31

Refer to the exhibit. Refiérase a la exposición. A network administrator needs to implement inter-VLAN routing on a hierarchical network. Un administrador de red necesita implementar el enrutamiento entre VLAN en una red jerárquica. On which devices should the inter-VLAN routing be configured? En los dispositivos que deben el enrutamiento entre VLAN se configura?

AS1 and AS2 AS1 y AS2 DS1 and DS2 DS1 y DS2 Gateway and CS1 Gateway y CS1 Gateway, CS1, DS1, and DS2 Gateway, CS1, DS1 y DS2

32 32 Which three statements are correct concerning the default configuration of a new switch? ¿Qué tres afirmaciones son correctas, relativa a la configuración por defecto de un nuevo switch? (Choose three.) (Elija tres.)

Spanning Tree Protocol is disabled. Protocolo Spanning Tree se desactiva. Enable password is configured as cisco. Habilitar contraseña se configura como cisco. All switch ports are assigned to VLAN1. Todos los puertos de switch se asignan a

Page 46: CCNA 3 Final  V4-2 examenes

la VLAN1. The flash directory contains the IOS image. El directorio flash contiene la imagen del IOS. VLAN1 is configured with a management IP address. VLAN1 se configura con una dirección de gestión de la PI. All interfaces are set to auto-negotiation of speed and duplex. Todas las interfaces se establecen en la negociación automática de velocidad y dúplex.

33 33

Refer to the exhibit. Refiérase a la exposición. All hosts are in listen mode. Todos los ordenadores están en modo de escucha. Host 1 and Host 4 both transmit data at the same time. Anfitrión 1 y 4 de acogida tanto de transmisión de datos al mismo tiempo. How do the hosts respond on the network? ¿Cómo responden los hosts en la red? (Choose two.) (Elija dos.)

After the end of the jam signal, a backoff algorithm is invoked. Después de la final de la señal de congestión, un algoritmo de backoff se invoca. Hosts 1 and 4 are operating full duplex so no collision will exist. Hosts 1 y 4 están operando full duplex por lo que no existe colisión. The hub will block the port connected to Host 4 to prevent a collision. El hub bloqueará

Page 47: CCNA 3 Final  V4-2 examenes

el puerto conectado al host de 4 a evitar una colisión. Hosts 1 and 4 are assigned shorter backoff values to provide them priority to access the media. Hosts 1 y 4 se asignan los valores más cortos de postergación para darles prioridad para acceder a los medios de comunicación. If a host has data to transmit after the backoff period of that host, the host checks to determine if the line is idle before transmitting. Si un host tiene datos para transmitir después del período de retroceso de ese host, los controles host para determinar si la línea está en reposo antes de transmitir.

34 34

Refer to the exhibit. Refiérase a la exposición. After the listed commands are entered

Page 48: CCNA 3 Final  V4-2 examenes

into router R1 and switch S1, the administrator enters the show interface fa0/1 trunk and gets the results shown. Después de los comandos que aparecen se introducen en el router R1 y el switch S1, el administrador entra en el show interface Fa0 / 1 del tronco y obtiene los resultados mostrados. What is the likely problem? ¿Cuál es el problema más probable?

The trunk is established, but no VLANs have been configured to use it. El tronco está establecido, pero no las VLAN se han configurado para usarlo. The trunk has not been established because the router does not support dynamic trunking protocol. El tronco no se ha establecido ya que el router no soporta el protocolo de trunking dinámico. The router, the switch, or both must be configured with the dynamic desirable option for dynamic trunking protocol to establish a trunk. El router, el switch, o ambos debe estar configurado con la opción dinámica conveniente para el protocolo de concentración de enlaces dinámicos a establecer un tronco. The router is missing the dynamic trunking protocol statements necessary to form a trunk. El router es que faltan los estados dinámicos de trunking protocolo necesario para formar un tronco.

35 35

Refer to the exhibit. Refiérase a la exposición. Which two statements are true about the

Page 49: CCNA 3 Final  V4-2 examenes

operation of the interfaces? ¿Qué dos afirmaciones son ciertas acerca de la operación de las interfaces? (Choose two.) (Elija dos.)

Incoming traffic with VLAN ID 0 is processed by interface fa0/0. El tráfico entrante con VLAN ID 0 es procesado por la interfaz Fa0 / 0. Incoming traffic that has a VLAN ID of 2 is processed by subinterface fa0/0.2. El tráfico entrante que tiene un ID de VLAN de 2 es procesado por subinterfaz fa0/0.2. Both subinterfaces remain up with line protocol up, even if fa0/0 line protocol is down. Ambos permanecen subinterfaces con el protocolo de línea para arriba, aunque Fa0 / 0 protocolo de línea está inactivo. Subinterfaces use unique MAC addresses by adding the 802.1Q VLAN ID to the hardware address. Subinterfaces uso único direcciones MAC mediante la adición de la 802.1Q VLAN ID a la dirección de hardware. Traffic inbound on this router is processed by different subinterfaces, depending on the VLAN from which the traffic originated. El tráfico de entrada en este router es procesado por subinterfaces diferentes, dependiendo de la VLAN de que el tráfico originado.

36 36 What three tasks should be performed before moving a Catalyst switch to another VTP management domain? ¿Qué tres tareas que deben realizarse antes de mover un switch Catalyst a otra administración de dominio VTP? (Choose three.) (Elija tres.)

Select the correct VTP mode and version. Seleccione el modo correcto de VTP y la versión. Configure the switch with the name of the new management domain Configurar el switch con el nombre de la nueva administración de dominio Download the VTP database from the VTP server in the new domain. Descargar la base de datos VTP del servidor VTP en el nuevo dominio. Configure the VTP server in the new domain to recognize the BID of the switch. Configurar el servidor VTP en el nuevo dominio para reconocer el BID del conmutador.

Reset the VTP counters to allow the switch to synchronize with the other switches in the new domain. Restablecer los contadores VTP para permitir que el interruptor para sincronizar con los otros switches en el nuevo dominio. Verify that the switch has a lower configuration revision number than the other switches in the new domain Compruebe que el interruptor tiene un número de revisión de configuración más bajo que los otros switches en el nuevo dominio

37 37

Page 50: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Hosts A and B, connected to hub HB1, attempt to transmit a frame at the same time but a collision occurs. Hosts A y B, conectados al hub HB1, intento de transmitir una trama a la vez, pero se produce una colisión. Which hosts will receive the collision jamming signal? Que alberga recibirá la señal de interferencia de colisión?

only hosts A and B sólo los hosts A y B only hosts A, B, and C sólo los hosts A, B y C only hosts A, B, C, and D sólo los hosts A, B, C y D only hosts A, B, C, and E sólo los hosts A, B, C y E

38 38 Which statement regarding the service password-encryption command is true? ¿Qué afirmación sobre el comando service password-encryption es cierto?

The service password-encryption command is entered at the privileged EXEC mode prompt. El comando service password-encryption se introduce en el modo EXEC privilegiado. The service password-encryption command encrypts only passwords for the console and VTY ports. El comando service password-encryption encripta contraseñas sólo para la consola y los puertos VTY. The service password-encryption command encrypts all previously unencrypted passwords in the running configuration. La contraseña de cifrado de comando de

Page 51: CCNA 3 Final  V4-2 examenes

servicio encripta todas las contraseñas sin cifrar previamente en la configuración activa. To see the passwords encrypted by the service password-encryption command, enter the no service password-encryption command. Para ver las contraseñas cifradas por el comando service password-encryption, sin entrar en el comando service password-encryption.

39 39

Refer to the exhibit. Refiérase a la exposición. Which two statements are true regarding what the cost value of 23 represents for Switch4? ¿Qué dos afirmaciones son ciertas con respecto a lo que el valor de costo, de 23 representa para Switch4? (Choose two.) (Elija dos.) This cost represents the lowest cost path for Switch4 to the root switch. Este costo representa el costo más bajo para la ruta de acceso a Switch4 el switch raíz. A cost of 23 is the value being advertised out port 16 on the switch upstream (closer) to the root switch. Un costo de 23 es el valor que se anuncia a cabo el puerto 16 en el interruptor de aguas arriba (más cerca) para el switch raíz. Switch4 adds the cost of a Fast Ethernet link to 23 to determine its total cost to reach the root switch Switch4 agrega el costo de una conexión Fast Ethernet a 23 para determinar su costo total para alcanzar el switch raíz Switch4 is connected via a Fast Ethernet link to an upstream switch that in turn is directly connected to the root switch via a Gigabit Ethernet link. Switch4 está conectado a través de un enlace Fast Ethernet a un conmutador de aguas arriba que a su vez está conectado directamente con el switch raíz a través de un enlace Gigabit Ethernet. The root switch is advertising a cost of 23, which is lower than any other switch in the VLAN0001 spanning-tree domain. El switch raíz es la publicidad con un costo de 23, que es inferior al de cualquier otro switch en el dominio VLAN0001 spanning-tree.

40 40

Page 52: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. What three statements describe why Host1 and Host2 are unable to communicate? ¿Qué tres afirmaciones que describen por qué host1 y host2 son incapaces de comunicarse? (Choose three.) (Elija tres.)

The switch ports are on different VLANs. Los puertos del switch están en VLAN diferentes. The switch IP address is on the wrong subnet. La dirección IP es el interruptor en la subred errónea. The hosts are configured on different logical networks. Los anfitriones se configuran en diferentes redes lógicas. A router is required to forward traffic between Host1 and Host2. Un router es necesario para avanzar entre el tráfico host1 y host2. The VLAN port assignments must be contiguous for each VLAN. Las asignaciones de puertos VLAN deben ser contiguas para cada VLAN. The host default gateway addresses must be on the same logical network. Las direcciones de puerta de enlace predeterminada debe estar en la misma red lógica.

41 41

Page 53: CCNA 3 Final  V4-2 examenes

Refer to the exhibit. Refiérase a la exposición. Each switch is shown with its MAC address. Cada switch se muestra con su dirección MAC. Which switch will be elected as the spanning-tree root bridge if the switches are configured with their default priority values? Cuál de los switches será elegido como el puente raíz spanning-tree si los switches se configuran con sus valores por defecto prioridad?

switch A Un interruptor de switch B interruptor B switch C interruptor C switch D interruptor D switch E interruptor de E switch F interruptor F

42 42

Refer to the exhibit. Refiérase a la exposición. Hosts PC_A and PC_B send traffic simultaneously, and the frames from the transmitting stations collide. Ejércitos PC_A y PC_B enviar tráfico al mismo tiempo, y los marcos de la colisión las estaciones transmisoras. What is the last device to receive the collision? ¿Cuál es el último dispositivo para recibir la colisión?

hub HB1 centro HB1

Page 54: CCNA 3 Final  V4-2 examenes

switch SW1 SW1 router R1 router R1 switch SW2 interruptor SW2 router R2 Router R2 switch SW4 interruptor SW4

43 43 Why is it important that the network administrator consider the spanning-tree network diameter when choosing the root bridge? ¿Por qué es importante que el administrador de la red considerar el diámetro de la red spanning-tree la hora de elegir el puente raíz?

The network diameter limitation is 9. La limitación de diámetro de la red es de 9. BPDUs may be discarded because of expiring timers. BPDU pueden ser descartados debido a que expira temporizadores. The cabling distance between the switches is 100 meters. La distancia de cableado entre los switches es de 100 metros. The network diameter must be set to the number of meters of the cable between the root bridge and its farthest connected switch. El diámetro de la red se debe establecer en el número de metros de cable entre el puente de la raíz y su más lejano interruptor conectado.

44 44

Refer to the exhibit. Refiérase a la exposición. A network administrator has segmented the network into two VLANs and configured Router1 for inter-VLAN routing. Un administrador de red ha segmentado en la red en dos VLAN y configurar Router1 de enrutamiento entre VLAN. A test of the network, however, shows that hosts on each VLAN can only access local resources and not resources on the other VLAN. Una

Page 55: CCNA 3 Final  V4-2 examenes

prueba de la red, sin embargo, muestra que los hosts en cada VLAN sólo pueden acceder a los recursos locales y no los recursos en la VLAN de otros. What is the most likely cause of this problem? ¿Cuál es la causa más probable de este problema?

Switch port Fa0/1 is not trunking. Cambiar el puerto Fa0 / 1 no es de trunking. Router interface Fa0/0 is possibly down. Interfaz del router Fa0 / 0 es, posiblemente, hacia abajo. No routing protocol is configured on Router1. No hay protocolo de enrutamiento se configura en Router1. One of the router subinterfaces is possibly down. Una de las subinterfaces router es, posiblemente, hacia abajo.

45 45 What is the purpose of issuing the command switchport mode access on a switch interface? ¿Cuál es el propósito de emitir el comando switchport acceder al modo de una interfaz de switch? disable port security desactivar la protección portuaria make the port operational hacer operativo el puerto override the default port behavior reemplazar el comportamiento predeterminado del puerto force the port to be a part of a single vlan vigor el puerto a ser parte de una sola VLAN

46 46

Refer to the exhibit. Refiérase a la exposición. Which statement is true regarding the information shown? ¿Cuál afirmación es correcta con respecto a la información que se muestra? Only one VLAN is currently configured to use the trunk links. Sólo una VLAN está actualmente configurado para utilizar los enlaces troncales.

Page 56: CCNA 3 Final  V4-2 examenes

The switch negotiated trunk links for interfaces Fa0/1 and Gi0/1. El interruptor negociado enlaces troncales para interfaces Fa0 / 1 y Gi0 / 1. A Cisco proprietary protocol is in use for interfaces Fa0/1 and Gi0/1. Un protocolo propietario de Cisco está en uso de las interfaces Fa0 / 1 y Gi0 / 1. Interfaces Gi0/1 and Fa0/1 are allowed to carry data from multiple VLANs Interfaces Gi0 / 1 y Fa0 / 1 se les permite llevar los datos de múltiples VLANs

47 47 Which identifier is used to keep track of frames that are destined for a particular wireless client? ¿Qué identificador se usa para hacer un seguimiento de las tramas que están destinados a un cliente inalámbrico en particular? AID AYUDA SSID SSID BSSID BSSID ESSID ESSID

48 48

Refer to the exhibit. Refiérase a la exposición. What will happen when frames that contain an unknown source address reach interface fa0/24? ¿Qué pasará cuando los marcos que contienen una dirección de origen desconocido fa0/24 llegar a la interfaz?

A syslog message will be logged. Un mensaje de syslog se registra. Fa0/24 will become error-disabled. Fa0/24 se convertirán en errores con discapacidad. The incoming frames will be dropped Los marcos de entrada será dado de baja The security violation count will be incremented. El recuento de violación de la seguridad se incrementará.

49 49

In which mode is a VTP switch operating if it has been configured to only forward VTP advertisements? ¿En qué modo es un interruptor de VTP operativo si se ha configurado para reenviar sólo anuncios VTP? client cliente root la raíz server servidor transparent transparente

Page 57: CCNA 3 Final  V4-2 examenes

50 50 Which method establishes an administrative connection for configuring the Linksys WRT300N wireless access point? ¿Qué método establece una conexión administrativa para configurar el punto de acceso inalámbrico Linksys WRT300N?

Associate with the access point and then open a HyperTerminal session with the access point. Asociado con el punto de acceso ya continuación, abra una sesión de HyperTerminal con el punto de acceso. Physically connect to the access point and then reboot the computer to launch the configuration software. Conecte físicamente al punto de acceso ya continuación, reinicie el equipo para iniciar el software de configuración. From a computer in the same IP subnet as the access point, enter the default IP address of the access point in a web browser. Desde un ordenador en la misma subred IP que el punto de acceso, escriba la dirección IP por defecto del punto de acceso en un navegador web. Modify the TCP/IP properties of the computer connected to the access point so that it exists on the same network, and then reboot your computer to establish a connection. Modificar las propiedades TCP / IP de la computadora conectada al punto de acceso para que exista en la misma red, y luego reiniciar el equipo para establecer una conexión.

51 51 What two methods can be used to remove MAC address table entries from a switch? ¿Qué dos métodos se pueden utilizar para quitar entradas de la tabla de direcciones MAC de un switch? (Choose two.) (Elija dos.) The clear switching-tables command will remove statically configured entries. El comando de conmutación claro mesas quitará las entradas configuradas estáticamente. The clear mac-address-table command will remove statically and dynamically configured table entries. El mac-address-table comando clear elimina estática y dinámicamente configurado entradas de la tabla. The erase flash command will clear all statically configured table entries. El comando de borrado de flash se borrarán todas las entradas de la tabla configuradas estáticamente.

Statically configured MAC addresses will automatically be removed from the address table 300 minutes after the last activity on a switch port. Configurado estáticamente las direcciones MAC será automáticamente eliminado de la tabla de direcciones 300 minutos después de la última actividad en un puerto de switch.

52 52 What are two benefits of the IEEE 802.11n standard over the IEEE 802.11G? ¿Cuáles son dos beneficios del estándar IEEE 802.11n en el IEEE 802.11g? (Choose two.) (Elija dos.) requires less equipment requiere menos equipo provides improved range proporciona un mejor alcance permits increased data rates permite una mayor velocidad de datos has a single-input and a single-output tiene una sola entrada y una sola salida-

Page 58: CCNA 3 Final  V4-2 examenes

needs no hardware upgrade for compatibility no necesita ninguna actualización de hardware para la compatibilidad