AUTO RESTORATION & REPAIR SHOP

Sale Due to Death of Owner:

SPEED MASTERS9945 Mula Rd. STAFFORDTX 77477

AUCTION: WEDNESDAY, FEBRUARY 2510:00 A.M.

INSPECTION Tuesday

February 24 9:00 A.M.

to 4:00 P.M. & Morning of Sale

BUYER’S PREMIUM:

15% ONSITE 18% WEBCAST

Read Partial Terms and

Conditions on Last Page

of Brochure

AUCTION

On-Site Bidding in Stafford, Texas

or Bid Via Webcast at

Headquarters:1304 Langham Creek Drive, Suite 454

Houston, Texas 77084

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

Ron Moore, Texas Lic. #7314

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

DIRECTIONSFROM HOUSTON’S GEORGE BUSH INT’L AIRPORT: Proceed south out of the airport on JFK Blvd. to Beltway 8. Turn right (west) onto Beltway 8 and enter the freeway. Continue west and it will become the Sam Houston Tollroad. Travel counterclockwise around Houston on the Sam Houston Tollroad until you pass over Hwy. 59 on the southwest side of town. The next exit will be for Airport Road. Exit Airport Road but stay straight on the frontage road past Airport Road. The next street on your right will be Stafford Road. Turn right (west) onto Stafford Road and proceed to Mula Road. Turn right onto Mula Road and proceed to the sale site ahead on your left. Watch for auction signs.

CNC

2000

2005

2

HORIZONTAL BANDSAW

WELLSAW MDL. 1118, 11" x 18" rect. cap., adj. blade spd., 3 HP motor, 12' infeed and 4' outfeed tbls., coolant, 230 v., spare blade, S/N 3164.

EXPENDABLE TOOLING,

PRECISION ACCESSORIES,

MEASURING TOOLSKURT 8" MACHINE VISES; 8" DIA. 3-JAW HZ./VERT PRECISION SUPER SPACER; CARBIDE INSERT TOOL HOLDERS; COLLET SETS; LEVELING SCREWS; ENDMILLS; CARBIDE IN-SERTS; DRILL BITS; 0–12" O.D. MI-CROMETER SET; MORE.

4TH AXIS ROTARY INDEXERHAAS, 12" tbl., 3" hole.

ENGINE LATHELONGEM 20" X 80", Mdl. LG2080D, new 1995, 12" sw. over crosslide, spds.: 18–1,600 RPM, eng./met. threading, 12" 3-jaw chuck and 16" 4-jaw chucks, 20" faceplate, 3" spndl. hole, full length leadscrew, toolpost, steadyrest, follow rest, Enco Platinum Plus 2-axis DRO, 220/440v/60Hz/3PH, S/N 950196.

VERTICAL TURRET MILLBRIDGEPORT 1 HP SERIES J HEAD, 80–2,720 RPM, S/N J-110960. Base is Mdl. 100-1588, 10" x 54" tbl., 3.5" riser, new 1995, S/N 450663 w/Enco power longitudinal tbl. feed, Enco Platinum Plus DRO.

CNC VERTICAL MACHINING CENTER HAAS VF-4, new 2000, 18" x 52" T-slotted tbl., 20 HP vector drive, Haas CNC control, oper-ator’s pendant, programmable coolant nozzle, travels: 50@X, 20@Y, 20@Z, 20-position auto. tool changer, 40 taper, RS-232 input, floppy drive, au-ger chip conveyor, wired for 4th axis, S/N 18408. Includes (2) personal computers and GibbsCAM software.

AUCTION: WEDNESDAY, FEBRUARY 25 • 10:00 A.M.

CNC

2000

3

FABRICATING EQUIPMENTBEN PEARSON "MUFFLER SHOP" TUBEMASTER 1.5" TO 3" CAP. TUBE BENDER; FAMCO 52" SHEAR, Electromatic control for either single stroke or con-tinuous operation, foot operated pendant; KING MDL. 0199-266 MILL/DRILL, 2 HP/1PH, 1.25" drill cap., 5-1/8" spndl. feed, bench top type w/bench, S/N 75015063; JET 18" VERT. BANDSAW MDL. VBS-18MW, 18" throat, 19"x 19" tbl., adjustable fence, 1.75 HP, tilting tbl., 115 v., S/N 08-11273; MITTLER BROS. POWER SHRINKER/STRETCHER, pneumatic ram, foot control, S/N 356671337; MITTLER BROS. 10 T. CAP. LOUVER PRESS w/custom frame; MITTLER BROS. MDL. 200-36 36" THROAT VARIABLE SPD. MOTORIZED BEAD ROLLER; DREIS & KRUMP 5' PRESSBRAKE; KALAMAZOO 6" BELT/12" DISK SANDER; PECK STOW & WILCOX MDL. 381-D 22 ga. cap. 36" W. sheet metal bending roll, S/N 12/67; NORTHERN MDL. 143347 48" FINGER TYPE PRESSBRAKE, 1 mm cap., S/N 040314; RED ARROW H-FRAME PRESS, S/N U-27165; CAROLINA 30 T. H-FRAME PRESS; METORA 12" CHOP SAW; NORTHERN BAR BENDER;

MILLER DIALARC HF AC/DC TIG WELDER, S/N HH043560 w/Everlast Mdl. WRC-300A cooling radiator, S/N W300044098; LINDE V-160 MIG WELDER; THERMAL DYNAMICS PAKMASTER 100XL PLUS AIR PLASMA PORT. CUTTING SYSTEM; DAREX DRILL SHARPENER, 2 HP, 3,450 RPM, 115v/4.2a/60Hz, pedestal mounted; H.F. 6" BELT/8" DISC SANDER; MILWAUKEE 1.25" CAP. MAG. BASE DRILL; CENTRAL MDL. 95088 OSCILLATING SPNDL. SANDER; ABRASIVE CHOP SAW; CENTRAL PORT. HORIZ. BANDSAW; TOPLIFT PORT. HYD. PUMP AND RAMS; DAYTON TRADESMAN MDL. 3Z919A 20" FLOOR TYPE DRILL PRESS, 9-spd., 5/8" chuck; CLARKE METALWORKER 8" PEDESTAL MOUNTED BENCH GRINDER; DAYTON 2 HP DBL. END PEDESTAL GRINDER; BEVERLY MDL. B-2 PEDESTAL MOUNTED BENCH SHEAR; PNEUMATIC C-FRAME PRESS; TUBE BENDER w/hydraulic Power Team hyd. assist system; HEAVY DUTY WELDING TBL.; WOODWARD FAB 4" BENCH MOUNT BENDING BRAKE; MORE.

4

WIDE SELECTION OF SHOP TOOLS

RAW MATERIALROUND, SQUARE AND RECT-ANGULAR TUBE STOCK, AN-GLES, FLATS, STEEL AND ALUMINUM; MORE.

Sale Due to Death of Owner:

SPEED MASTERS9945 Mula Rd. STAFFORDTX 77477

AUCTION: WEDNESDAY FEBRUARY 25 • 10:00 A.M.

On-Site Bidding in Stafford, Texas or Bid Via

Webcast at

5

AUTOMOBILE TESTING & REPAIR EQUIPMENT

MAC TOOLS DIAGNOSTIC CENTER INCL. THE FOLLOWING: MDL. ET1020 DIGITAL ENGINE ANALYZER, Mdl. ET1010 diagnostic oscilloscope, Mdl. ET1000 digital engine analyzer, and Mdl. ET805 tach/dwell/volts meter; LONGHORN HEAVY DUTY 12,000 LB. (est.) cap. 4-post car lift w/integral front end lift unit; ROTARY MDL. SP09-202 9,000 LB. CAP. 2-POST FULL VEHICLE LIFT, S/N AKE97A0057; ROTARY MDL. SP0A9-200 9,000 LB. CAP. 2-POST FULL VEHICLE LIFT; BENDPAK 6,000 LB. CAP. MID-RISE PORTABLE CAR LIFT; MARQUETTE BAT-TERY CHARGER; BG TRANSMISSION FLU-ID REPLACEMENT SYSTEM; ROBINAIRE DIAL-A-CHARGE A/C SERVICE EQUIP.; MAC TOOLS MDL. AC610 REFRIGERANT RECOVERY AND RECYCLING STATION; MIDTRONICS ADVANCED ELECTRICAL SYSTEM ANALYZER; SNAP-ON ACT 3000 REFRIGERANT RECOVERY AND RECY-CLING CENTER; HOFMANN MDL. 22 TIRE MACHINE; HOFMANN MDL. 1200 WHEEL BALANCER; FMC MDL. B-601 BRAKE SERVICE CENTER; PRO-CUT ON-CAR BRAKE LATHE; RTI LASER 4-WHEEL ALIGNMENT SYSTEM; WEAVER HEAD-LIGHT TESTER; TRANSMISSION JACKS; FLOOR JACKS; 1 T. CAP. ENGINE HOIST; RATCHET TYPE CAR JACKS; MUCH MORE.

6

AUTO PARTS & REPAIR PARTS INVENTORYASSORTED NEW AND USED AUTO PARTS; HYD. FITTINGS; A/C PARTS; CONVOLUTED TUBES; DRIVE SHAFTS; REAR ENDS; MORE – SEE CATALOG.

PROJECT CAR1965 IMPALA SUPER SPORT, frame has been blasted and repainted, frame has been checked for squareness, auto. 4-spd. transmission, owner says all parts are there, motor has been reworked, mul-tiple spare parts are in the package.

UNABLE TO ATTEND?Bid on-line in real time at

TO PARTICIPATE YOU MUST:

1. Register at www.BidSpotter.com. Use the link to BidSpotter on PMI’s website calendar. DO IT NOW.2. Either wire transfer, or overnight delivery service a cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to:Plant & Machinery Inc. 1304 Langham Creek Dr., Suite 454 Houston, TX 77084Wire transfer instructions can be found at pmi-auction.comYou must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.If you need assistance, don’t hesitate to call (713) 691-4401. ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.

AUCTIONAUCTION: WEDNESDAY, FEBRUARY 25 • 10:00 A.M.

On-Site Bidding in Stafford, Texas or Bid Via Webcast at

7

FORKLIFTSYALE 5,000 LB. CAP., Mdl. GLC050VXNGSE094, new 2005, LP Fuel, 94" triple-stage mast, 218" lift height, cushion tires, side shift, 42" forks, S/N A910V03981C.

YALE 5,000 LB. CAP., Mdl. GLC050VXNVXQ084, new 2005, LP Fuel, 84" 4-stage mast, 240" lift height, cushion tires, side shift, 42" forks, S/N A910V04513C.

Sale Due to Death of Owner:

SPEED MASTERS

9945 Mula Road

STAFFORD, TEXAS 77477

INSPECTION Tuesday

February 24 9:00 A.M.

to 4:00 P.M. & Morning

of Sale

PROXY BIDS: If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instructions, or go to our website at www.pmi-auction.com.

PLANT SUPPORT EQUIPMENTATD MDL. ATD-84741 2-MAN REACH-IN CABINET STYLE 50 LB. CAP. ABRASIVE BLAST MACHINE; SPEEDAIRE GASOLINE POWERED PORTABLE AIR COMPRESSOR w/air receiver; 36' MONORAIL w/2 T. CM elec. chain hoist; (2) PORT-A-COOL MDL. 1000 PORTABLE PERSONAL COOL-ING SYSTEMS; FLOORKEEPER WALK-BEHIND FLOOR SCRUBBER; MOTORCRAFT STORAGE CABINETS; POR-TABLE SANDBLAST POTS; PORTABLE KEROSENE HEAT-ERS; ADJUSTABLE SCREW JACKS; CHICAGO VIBRATORY BOWL; SHOP VACUUMS; PEDESTAL FANS; LARGE ROUND SHOP FANS; C-CLAMPS; WELDERS VISE GRIP CLAMPS; NUT AND BOLT CAROUSEL TYPE DISPENSERS; EAGLE 5500 LB. CAP HYD. PALLET JACK; HOSE REELS; MORE.

20052005

QS-0025421

A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.

Everything will be sold to the highest bidder or bidders for cash in accordance with the auc-tioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until March 25, 2015.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of re-sale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART

OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the infor-mation herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS

AUTO HAULING TRAILER1999 PACE AMERICAN SHADOW SERIES MDL. SCX8530TTA, 30' L., 8.5' W., triple-axle, 18,000 lb. GVWR, Cummins 12 HP diesel generator w/109 H.O.M., (2) Quick Cool roof mount air conditioners, leveling system, independent torsion suspension, ramp style read door, man door, roof access ladder, awnings on both sides plus spare, 2-5/16" ball coupler, exterior lights, open interior, TX Lic. 264-02K, VIN 47ZWB30X7X048112.

GOLF CARTEZ-GO GASOLINE ENGINE TYPE, rough terrain knobby tires, overhead storage rack, electric start.

OFFICES & STORE FRONT FIXTURESGLASS DISPLAY COUNTERS; WALL SYSTEM FOR PRODUCT DISPLAY; GONDOLAS; DESKS; CHAIRS; FILING CABINETS; AMANA SIDE-BY-SIDE REF. FREEZER; FRIGIDAIRE ELEC-TRIC OVEN; HAMILTON BEACH MICROWAVE; MORE.

STREET SIGNSSTREET SIDE TYPE W/CHANGEABLE MESSAGE; LIGHTED OPEN SIGN.

PLANT & MACHINERY INC.

APPRAISAL DIVISIONConfidential Industrial Machinery & Equipment

Appraisals Call 1-800-282-8466

PROXY BIDS If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401

for instructions, or go to our website at www.pmi-auction.com.

UNABLE TO ATTEND?Bid on-line in real time atTO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. Use the link to BidSpotter on PMI’s

website calendar. DO IT NOW.2. Either wire transfer, or overnight delivery service a cashier’s check

deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, TX 77084 Wire transfer instructions can be found at pmi-auction.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.

If you need assistance, don’t hesitate to call (713) 691-4401.

ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.