a-1-pp-pi-sp-0011

PTTEP ARTHIT FIELD DEVELOPMENTCENTRAL FACILITIES

PIPING MATERIAL CLASS SPECIFICATION

A-1-PP-PI-SP-0011

CONTRACT NO. A-TPD 03-0043This cover page is a record for all revisions of the standard/specification identified above by number and title.

All previous cover pages are hereby superseded and are to be destroyed.

C 23.02.06 Approved for Construction PKG BV ARI MKSB1 05.10.05 Approved for Design PKG BV ARI BMKA2 28.02.05 Re-issued for Approval PKG BV ARI BMKA1 07.10.04 Issued for Approval PKG BV ARI BMKR2 27.08.04 Re-issued for Inter-Discipline Check PKG BV ARI

R1 09.07.04 Issued for IDC PKG BV ARIRev. Date Purpose of Issue Prepared Checked Discipline Project

No. By By Approval Approval

PTTEP ARTHIT FIELD DEVELOPMENTCENTRAL FACILITIES

PIPING MATERIAL CLASS SPECIFICATION

A-1-PP-PI-SP-0011

This cover page is a record for all revisions of the standard/specification identified above by number and title.

All previous cover pages are hereby superseded and are to be destroyed.

SWSW

Client

Approval

A-1-PP-PI-SP-0011, Rev. C

Arthit Field Development Central Facilities

PTTEP PIPING MATERIAL CLASS INDEX

S.NO. CLASS MATERIAL SERVICE REV NO.

1 A2 150 RF CS (GALV.) 0 INST. AIR, UTILITY AIR AND NITROGEN -29 TO 93 285 19.6 4 C

2 A7 150 FF 90/10 CuNi 0 FIRE WATER AND SEA WATER 38 TO 80 290 20 28 C

3 A9 150 FF GRP 0 HC LIQUID AND VAPOR 0 TO 93 145 10 24 C

4 A10 150 FF GRP 0 0 TO 93 232 16 36 C

5 A11 150 RF SS316/SS316L 0 EXHAUST -29 TO 593 10 0.7 24 C

6 A12 150 FF CPVC 0 POTABLE/SEA WATER AND CHEMICAL 24 TO 60 145 10 6 C

7 A13 150 FF GRP 0 FIRE WATER (DRY SYSTEM) 0 TO 93 232 16 10 C

8 BS1 150 RF CS 0.125 HC LIQUID AND VAPOR -29 TO 260 285 19.6 36 C

9 BS1N 150 RF CS 0.125 HC LIQUID AND VAPOR -29 TO 260 285 19.6 24 C

10 BS2 150 RF CS 0.25 HC LIQUID AND VAPOR -29 TO 260 285 19.6 24 C

11 B2 150 RF SS316/SS316L 0 -29 TO 93 275 19 6 C

12 B2L 150 RF SS316/SS316L 0 HC LIQUID AND VAPOR -100 TO 195 275 19 20 C

13 B2N 150 RF SS316/SS316L 0 HC LIQUID AND VAPOR -29 TO 260 275 19 36 C

14 B3S1 150 RF LTCS 0.125 HC LIQUID AND VAPOR (LT) -46 TO 260 285 19.6 32 C

15 B4N 150 RF DUPLEX SS 0 HC LIQUID AND VAPOR -29 TO 260 290 20 24 C

16 B5 150 RF CS 0.063 HEAT MEDIUM -29 TO 360 285 19.6 10 C

17 B12 150 FF 6 MOLY SS 0 SEA WATER -29 TO 149 290 20 28 C

18 CS1 300 RF CS 0.125 HC LIQUID AND VAPOR -29 TO 260 740 51 14 C

19 CS1N 300 RF CS 0.125 HC LIQUID AND VAPOR -29 TO 260 740 51 14 C

20 C2 300 RF SS316/SS316L 0 HC LIQUID AND VAPOR -29 TO 260 720 49.6 10 C

21 C2N 300 RF SS316/SS316L 0 HC LIQUID AND VAPOR -29 TO 260 720 49.6 30 C

22 C3S1 300 RF LTCS 0.125 HC LIQUID AND VAPOR -46 TO 260 740 51 24 C

23 C4N 300 RF DUPLEX SS 0 HC LIQUID AND VAPOR -29 TO 260 750 51.7 30 C

24 C5 300 RF CS 0.063 HEAT MEDIUM -29 TO 360 740 51 24 C

25 JS1 600 RF CS 0.125 HC LIQUID AND VAPOR -29 TO 260 1480 102 28 C

26 JS2N 600 RF CS 0.25 HC LIQUID AND VAPOR -29 TO 260 1480 102 24 C

27 J2N 600 RF SS316/SS316L 0 HC LIQUID AND VAPOR -29 TO 149 1440 99.3 30 C

28 J3S1 600 RF LTCS 0.125 HC LIQUID AND VAPOR (LT) -46 TO 260 1480 102 26 C

29 J4N 600 RF DUPLEX SS 0 HC LIQUID AND VAPOR -29 TO 260 1500 103.4 30 C

30 FS1 900 RTJ CS 0.125 HC LIQUID AND VAPOR -29 TO 360 2220 153.1 24 C

31 FS2N 900 RTJ CS 0.25 HC LIQUID AND VAPOR -29 TO 260 2220 153.1 24 C

32 F2N 900 RTJ SS316/SS316L 0 HC LIQUID AND VAPOR 2160 148.9 24 C

33 F3S1 900 RTJ LTCS 0.125 HC LIQUID AND VAPOR (LT) -46 TO 260 2220 153.1 24 C

34 F4N 900 RTJ DUPLEX SS 0 HC LIQUID AND VAPOR -29 TO 320 2250 155.1 24 C

35 G2L 1500 RTJ SS316/SS316L 0 HC LIQUID AND VAPOR -100 TO 165 3600 248.2 10 C

36 G2N 1500 RTJ SS316/SS316L 0 HC LIQUID AND VAPOR -46 TO 180 2538 175 10 C

37 G3S1 1500 RTJ LTCS 0.125 HC LIQUID AND VAPOR (LT) -46 TO 260 2538 175 36 C

38 G3S1N 1500 RTJ LTCS 0.125 HC LIQUID AND VAPOR (LT) -46 TO 260 2538 175 36 C

39 G5 1500 RTJ CS 0.063 HEAT MEDIUM -29 TO 360 1950 135 10 C

40 PL1 600 RF CS 0.39 HC LIQUID AND VAPOR -29 TO 120 1117 77 16 C

41 PL2 600 RF CS 0.116 HC LIQUID AND VAPOR -29 TO 80 1117 77 8 C

42 PL3 1500 RTJ LTCS 0 HC LIQUID AND VAPOR (LT) -46 TO 90 2538 175 42 C

PIPING SPEC

CORROSION ALLOW., INCH

TEMP. RANGE, 0C

MAX. PRESSURE,

PSIG

MAX. PRESSURE,

BARG

MAX NPS, INCH

FIRE/PROD./FRESH/SEA WATER AND BLACK WATER SEWAGE

CHEMICAL, POTABLE WATER AND DIESEL

-29 TO 180

SHEET No. ISSUE DATE TEMP. CORR. CLASS STANDARD

1 Jul-04 SERVICE RANGE ALLOW.

CODE -20/200 °F 150

ASME B31.3 INSTRUMENT AIR, UTILITY AIR AND NITROGEN -29/93 °C - CARBON STEEL A2

PIPE AND FITTINGS VALVES

THREADED FITTINGS - GALVANIZED

PIPE SEAMLESS ASME B16.11 ASTM A-105 GATESIZE THICKNESS & MATL. SIZE DESCRIPTION CODE

A-53 GR B GALVANIZED SIZE ELL TEE RED CAP COUPLING PLUG BUSH 1 1/2" & 800 CLASS THD VG-40

1/2" - 4" 3000 LB 3000 LB 3000 LB 3000 LB 3000 LB 3000 LB 3000 LB SMLR

1/2" - 1 1/2 " SCH 80 SMLS 2" - 4" 150 CLASS RF VG-60

2" - 4" SCH 80 SMLS UNION

1/2" - 4" 3000 LB

PLUGSIZE DESCRIPTION CODE

MECHANICAL JOINTSSIZE DESCRIPTION BOLTS & GASKETS SIZE DESCRIPTION CODE

FLANGES PER ASME B16.5 ASTM A-105 STUD BOLTS - ASTM A-193 GR B7 1 1/2" & 800 CLASS THD VB-40

HOT DIP GALVANISED AS PER ASTM A153 SMLR

1/2" - 4" 150 RF THD FLANGE (GALV.) HVY. HEX. NUTS - ASTM A-194 GR 2H

(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 1" - 4" 150 CLASS RF VB-60

GASKET - SPIRAL WOUND WITH 316 SS

1" - 3" 300 RF THD FLANGE (GALV.) WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20

(BORE TO MATCH PIPE) CS BLACK EPOXY COATED CENTERING RING - 0.125" THICK

- FOR CONTROL VALVE MAKEUP

1/2" - 4" 150 RF BLIND FLANGE (GALV.) MISCELLANEOUS ITEMS GLOBESIZE DESCRIPTION SIZE DESCRIPTION CODE

1 1/2" & 800 CLASS THD VGL-40

SMLR

2" - 4" 150 CLASS RF VGL-60

BRANCH REINFORCEMENT CHECK

HE

AD

ER

SIZ

ES

(IN

CH

ES

)

1 & SMLR T SIZE DESCRIPTION CODE

1 1/2 R T 1 1/2" & 800 CLASS THD, PISTON VC-40

2 R R T LEGEND SMLR

3 R R R T T - EQUAL TEE

4 R R R R T R - REDUCING TEE 2" - 4" 150 CLASS RF, SWING VC-60

OTHER VALVESSIZE DESCRIPTION CODE

3/4" x 1/2" 6000 CWP NEEDLE VALVE THD VN-2

1/2" - 1" 6000 CWP NEEDLE VALVE THD VN-3

1 & SMLR 1 1/2 2 3 4

BRANCH SIZES (INCHES)

NOTES: PRESS - TEMP RATING

1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 5. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB TEMPERATURE PRESS. TEMPERATURE PRESS.

AI, AU, CO, GI, GU, NG, HY 6. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION °F MAX. °C MAX.

WITH AGS-8. -20 TO 100 285 -29 TO 38 19.6

3. ALL PIPING SHALL BE GALVANIZED. PIPE SPOOLS 200 260 93 17.9

REQUIRING WELDING SHALL BE ZINC PRIMER PAINTED

AS PER AGS-13 AFTER WELDING.

4. CONTROL VALVE SIZES UP TO AND INCLUDING THREE

INCHES SHALL BE RATED 300 LB ASME MINIMUM. MAX HYDROSTATIC TEST LIMITED BY FLANGES

A-1-PP-PI-SP-0011 PSIG - 428 BARG - 30

A2 28.02.05 Re-issued for Approval PKG BV ARI BMK C 23.02.06 Approved for Construction PKG BV ARI MKS SW

A1 07.10.04 Issued for Approval PKG BV ARI B1 05.10.05 Approved for Design PKG BV ARI BMK SW Arthit Field Development

REV DATE DESCRIPTION BY CHK LEAD PM PTTEP REV DATE DESCRIPTION BY CHK LEAD PM PTTEP PTTEP Central Facilities

BALL (NOTE 5)

BETWEEN 125µ AND 250µ INCH.



CODE 100/176 °F

ASME B31.3/EEMUA 144 FIREWATER AND SEA WATER 38/80 °C - CU NICKEL A7


SOCKET FITTINGS (< 2")

PIPE Cu-Ni 90-10 UNS 7060X PER EEMUA 146, WALL THK. TO MATCH PIPE GATESIZE THICKNESS & MATL. SIZE DESCRIPTION CODE

Cu-Ni 90-10 UNS 7060X SMLS ELL NIPPLE 1 1/2" & 150 CLASS THD VG-10

PER EEMUA 144 TEE SOCKOLET SWAGE NIPPLE SMLR

1/2" - 3/4" 2 MM WT REDUCER ADAPTER BUSHING

1" - 3" 2.5 MM WT CAP

4" 3 MM WT COUPLING

6" 3.5 MM WT PLUG

8" 4.5 MM WT

10" 5.5 MM WT

12" 7 MM WT BUTT - WELDING FITTINGS (=> 2")

14" 8 MM WT Cu-Ni 90-10 UNS 7060X PER EEMUA 146, WALL THK. TO MATCH PIPE PLUGSIZE ELL TEE RED CAP WELDOLET SIZE DESCRIPTION CODE

Cu-Ni 90-10 UNS 7060X SMLS OR WELDED NOTE 3 NOTE 3 NOTE 3 NOTE 3

100% RADIOGRAPHY PER EEMUA 144 2" - 14" NOTE 3

16" 9 MM WT

18" 9.5 MM WT

20" 11 MM WT

24" 13 MM WT

28" 15 MM WT

MECHANICAL JOINTS BALLSIZE DESCRIPTION BOLTS & GASKETS SIZE DESCRIPTION CODE

FLANGES (NOTE 5) STUD BOLTS - ASTM A-193 GR B7 1 1/2" & 300 CLASS THD VB-64


LAP JOINT C/W STUB END TYPE L TO EEMUA 145 CL 150 HVY. HEX. NUTS - ASTM A-194 GR 2H

GALVANISED BACKING FLANGE A-105, HOT DIP GALVANISED AS PER ASTM A153 2" 300 CLASS FF VB-100

STUB END Cu-Ni 90-10 UNS 7060X GASKET - 1/8" THK NAF UNGRAPHITED BOTH SIDE FULL FACE (FOR FF FLG.)

(BORE TO MATCH PIPE) - 1/8" THK NAF UNGRAPHITED BOTH SIDE FLAT RING (FOR RF 150 CLASS FF VB-105

SOLID WELD NECK FF EEMUA 145 CL 150 FLANGES / LAP JOINTS)

Cu-Ni 90-10 UNS 7060X INSULATING GASKET SET - SEE NOTE 4

(BORE TO MATCH PIPE)

BLIND FLANGE RF EEMUA 145 CL 150 MISCELLANEOUS ITEMS GLOBEGALVANISED FLANGE A105 WITH Cu-Ni 90-10 UNS 7060X DISC SIZE DESCRIPTION SIZE DESCRIPTION CODE

1" - 2" SOLID WELD NECK FF EEMUA 145 CL 300 1/2" - 2" 300 CLASS FF VGL-100

Cu-Ni 90-10 UNS 7060X

(BORE TO MATCH PIPE) 3" - 12" 150 CLASS FF VGL-90

1" - 2" BLIND FLANGE FF EEMUA 145 CL 300

GALVANISED FLANGE A105 WITH Cu-Ni 90-10 UNS 7060X DISC


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T 1 1/2" & 300 CLASS FF, PISTON VC-160

2 * R T LEGEND SMLR

3 * R R T 2" 300 CLASS FF, WAFER VC-92

4 * * R R T W - WELDOLET(WOL)

6 * * W R R T T - EQUAL TEE 150 CLASS FF, WAFER VC-91

8 * * W R R R T R - REDUCING TEE

10 * * W W R R R T

12 * * W W W R R R T

14 * * W W W W R R R T

16 * * W W W W W R R R T OTHER VALVES18 * * W W W W W W R R R T SIZE DESCRIPTION CODE

20 * * W W W W W W W R R R T 2" - 28" 150 CLASS RF, BUTTERFLY VW-50

24 * * W W W W W W W W R R R T

28 * * W W W W W W W W W R R R T 1/2" - 2" 150 CLASS MONO FLANGE, SBB VNI-15

FF x THD

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28



1. THIS STANDARD IS FOR THE FOLLOWING SERVICE: 5 SOLID WELD NECK FLANGES SHALL ONLY BE USED WHEN MATING TEMPERATURE PRESS. TEMPERATURE PRESS.

FW, SW, WS TO FLAT FACE EQUIPMENT. PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 6. FLANGE FACING SHALL BE ROUGH FINISH WITH A ROUGHNESS °F MAX. °C MAX.

WITH AGS-8. 100 290 38 20

3 WELDED FITTING SCHEDULE SHALL BE EQUAL TO PIPE 7. FOR SPRAY NOZZLE, HYDROTEST VENT AND DRAIN CONNECTION 122 285 50 19.7

SCHEDULE. ONLY. 176 266 80 18.3

4 USE INSULATING GASKET SET FOR JUNCTION OF COPPER 8. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR

NICKEL FLANGES TO CARBON AND STAINLESS STEEL FLANGES. BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR

ALL STUD BOLTS SHALL HAVE SLEEVES AND WASHERS. EXPOSED ENDS. MAX HYDROSTATIC TEST LIMITED BY FLANGES





150/20 bar

THREDOLET (NOTE 7)

2" - 28"

1/2" - 28"

3" - 6"

1/2" - 28"

1/2" - 28"

* - SOCKOLET/THREADOLET

3" - 28"




CODE 32/200 °F 150 / 10 BAR

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR 0/93 °C - FIBERGLASS A9


FILAMENT WOUND FITTINGS (1" & ABOVE)

PIPE FILAMENT WOUND EPOXY RESIN LINER, SINGLE PIECE CONS. OF 7000M (UPTO 11/2") & 2410C (2"&ABOVE) MATERIALS OR EQUAL GATESIZE THICKNESS & MATL. SIZE ELL TEE RED COUPL. NIPPLE SAD RED SIZE DESCRIPTION CODE

FRP CONDUCTIVE PIPE BONDSTRAND NOTE 3 NOTE 3 NOTE 3 NOTE 3 NOTE 3 NOTE 3

SERIES 7000M (UPTO 11/2") & 2410C 2" - 12" 150 CLASS RF VG-60

(2"&ABOVE) OR EQUAL

1" - 11/2" 3.5 MM WT (MIN)

2" - 4" 1.8 MM WT (MIN)

6" 2 MM WT (MIN)

8" 2.6 MM WT (MIN)

10" 3.0 MM WT (MIN)

12" 3.4 MM WT (MIN)

14" 3.6 MM WT (MIN) PLUG16" 4.0 MM WT (MIN) SIZE DESCRIPTION CODE

18" 4.4 MM WT (MIN)

20" 4.9 MM WT (MIN)

24" 5.8 MM WT (MIN)

WT = WALL THK.


FLANGES (NOTE 5) STUD BOLTS - ASTM A-193 GR B7

1" - 24" FILAMENT WOUND EPOXY RESIN HEAVY DUTY HOT DIP GALVANISED AS PER ASTM A153 1/2" - 4" 150 CLASS RF VB-60

FLANGE, WITH REINFORCED LINER, CONDUCTIVE FILAMENT; HVY. HEX. NUTS & METALLIC WASHERS- ASTM A-194 GR 2H

2410 C OR EQUAL; FF HOT DIP GALVANISED AS PER ASTM A153 6" - 24" 150 CLASS RF VB-63

FLANGES TO BE DRILLED IN ACCORDANCE GASKET - 1/8" THICK EPDM FULL FACE (FOR FF FLANGES)

WITH ASME B16.5, CLASS 150. 1/8" THICK EPDM FLAT RING (FOR RF FLANGES)

1" - 24" FILAMENT WOUND EPOXY RESIN BLIND FLANGE

WITH REINFORCED LINER, CONDUCTIVE FILAMENT;

2410 C OR EQUAL; FF MISCELLANEOUS ITEMS GLOBEFLANGES TO BE DRILLED IN ACCORDANCE SIZE DESCRIPTION SIZE DESCRIPTION CODE

WITH ASME B16.5, CLASS 150.

1 1/2" & 150 CLASS RF VGL-62

SMLR

FIBREGLASS PIPE TO FITTING JOINT BONDSTRAND RP-34 2" - 12" 150 CLASS RF VGL-60

(OR UNOCAL APPROVED EQUAL) ADHESIVE SHALL BE USED


HEA

DER

SIZ

ES

(IN

CH

ES

)

1 T SIZE DESCRIPTION CODE

1 1/2 R T LEGEND

2 S R T T - EQUAL TEE 1 1/2" & 150 CLASS RF, PISTON VC-120

3 S S R T R - REDUCING TEE SMLR

4 S S S R T S - SADDLE REDUCING FLANGED OR SOCKET

6 S S S R R T X - TEE W/NIPPLE & REDUCER 150 CLASS RF, WAFER VC-122

8 S S S S R R T

10 S S S S R R R T

12 S S S S R R R R T

14 S S S S S R R R R T

16 S S S S S R R R R R T OTHER VALVES18 S S S S S S R R R R R T SIZE DESCRIPTION CODE

20 S S S S S S X R R R R R T

24 S S S S S S X X R R R R R T 150 CLASS RF, BUTTERFLY VW-2

1 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24



1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 6. FLANGE FACING FOR RAISED FACE SHALL BE SMOOTH FINISH TEMPERATURE PRESS. TEMPERATURE PRESS.

PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 7. FLANGE FACING FOR FLAT FACE SHALL BE ROUGH FINISH °F MAX. °C MAX.

WITH AGS-8. 32 TO 200 145 0 TO 93 10

3. FITTINGS SHALL BE FOR 10 BAR SYSTEM. 8. GRP PIPING MATERIAL SHALL CONFIRM TO ASTM D2996 & F1173.

4 BALL VALVES SHALL BE FIRESAFE CERTIFIED

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8

5 FLANGE VENDOR SHALL PROVIDE BOLT LENGTH,

BOLT TORQUE TABLES AND CERTIFIED DIMENSIONAL MAX HYDROSTATIC TEST LIMITED BY PIPE

DRAWINGS. A-1-PP-PI-SP-0011A2 28.02.05 Re-issued for Approval PKG BV ARI BMK C 23.02.06 Approved for Construction PKG BV ARI MKS SW



1" - 24"

1" - 24"

2" - 24"

2" - 24"

DG, BW, GW, DP, SW WITH A ROUGHNESS BETWEEN 125µ AND 250µ INCH.

WITH A ROUGHNESS BETWEEN 250µ AND 500µ INCH.

PSIG - 218 BARG - 15


1 Aug-04 SERVICE RANGE ALLOW.

CODE FIRE WATER, PRODUCED WATER, FRESH WATER, SEA WATER 32/200 °F

ASME B31.3/EEMUA 144/ISO 14692 AND BLACK WATER SEWAGE 0/93°C - FIBERGLASS A10


SOCKET FITTINGS (UPTO 3/4")


Cu-Ni 90-10 UNS 7060X SMLS ELL THREDOLET NIPPLE 1 1/2" & 150 CLASS THD VG-10


1/2" - 3/4" 2 MM WT REDUCER

FRP CONDUCTIVE PIPE BONDSTRAND 7000M CAP

(1"&11/2") & 2416C(2"&ABOVE) OR EQ. COUPLING

1" - 11/2" 3.8 MM WT (NOM.) PLUG

2" - 3" 4.1 MM WT (NOM.)

4"-6" 5.3 MM WT (NOM.)

8" 6.3 MM WT (NOM.) FILAMENT WOUND FITTINGS (1" & ABOVE)

10" 8.0 MM WT (NOM.) FILAMENT WOUND EPOXY RESIN LINER CONDUCTIVE, SINGLE PIECE CONSTRUCTION OF 7000M (1"&11/2") PLUG12" 9.5 MM WT (NOM.) & 2416C (2" & ABOVE) MATERIALS OR EQUAL SIZE DESCRIPTION CODE

14" 10.3 MM WT (NOM.) SIZE ELL TEE RED COUPL. NIPPLE SAD RED

16" 11.8 MM WT (NOM.) 1" - 36" NOTE 3 NOTE 3 NOTE 3 NOTE 3 NOTE 3 NOTE 3

18" 13.1 MM WT (NOM.)

20" 14.6 MM WT (NOM.)

24" 17.6 MM WT (NOM.)

28" 21.4 MM WT (NOM.)

32" 24.5 MM WT (NOM.)

36" 27.4 MM WT (NOM.)


FLANGES (NOTE 5, 6) STUD BOLTS - ASTM A-193 GR B7

1/2" - 3/4" LAP JOINT C/W STUB END TYPE L TO EEMUA 145 CLASS 150 HOT DIP GALVANISED AS PER ASTM A153 1 1/2" & 150 CLASS FF VB-105

GALVANISED BACKING FLANGE A-105, SMLR

STUB END Cu-Ni 90-10 UNS 7060X (BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153

1/2" - 3/4" SOLID WELD NECK FF EEMUA 145 CLASS 150 GASKET - 1/8" THK EPDM FULL FACE (FOR FF FLANGES)

Cu-Ni 90-10 UNS 7060X (BORE TO MATCH PIPE) - 1/8" THK NAF UNGRAPHITED BOTH SIDE FLAT RING (FOR

1/2" - 3/4" BLIND FLANGE FF EEMUA 145 CLASS 150 RF FLANGES / LAP JOINTS)

GALVANISED FLANGE A105 WITH Cu-Ni 90-10 UNS 7060X DISC

1" - 24" FILAMENT WOUND EPOXY REINFORCED WITH FIBERGLASS

STRANDS & CONDUCTIVE FILAMENT; 7000M (1"&11/2") & MISCELLANEOUS ITEMS GLOBE2416C (2"&ABOVE) OR EQUAL, HEAVY DUTY HUBLESS, FF, B16.5; SIZE DESCRIPTION SIZE DESCRIPTION CODE

CLASS 150; D-4024

28" - 36" FILAMENT WOUND EPOXY REINFORCED WITH FIBERGLASS 1/2" - 2" 150 CLASS FF VGL-137

STRANDS & CONDUCTIVE FILAMENT; 2416C OR EQUAL,

HUB FLANGE, FF, B16.47 3" - 12" 150 CLASS FF VGL-90

SERIES A; CLASS 150; D-4024

1" - 36" FILAMENT WOUND EPOXY REIN. WITH FIBERGLASS STRANDS &

CONDUCTIVE FILAMENT; 7000M (1"&11/2") & 2416C (2"&ABOVE)

OR EQUAL, BLIND FLANGE, FF, B16.5/B16.47 SERIES A;CLASS 150


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T LEGEND

2 R/SB R T SB - SADDLE W/90-10 Cu-Ni BUSHED OUTLET 1 1/2" & 150 CLASS FF, PISTON VC-159

3 S/SB S R T (3/4 & SMALLER) BONDSTRAND SADDLE SMLR

4 S/SB S R R T T - EQUAL TEE 2" - 36" 150 CLASS FF, WAFER VC-91

6 S/SB S R R R T R - REDUCING TEE

8 S/SB S S R R R T S - SADDLE REDUCING FLANGED OR SOCKET

10 S/SB S S S R R R T X - TEE W/NIPPLE & REDUCER

12 S/SB S S S R R R R T

14 S/SB S S S S R R R R T

16 S/SB S S S S R R R R R T OTHER VALVES18 S/SB S S S S X R R R R R T SIZE DESCRIPTION CODE

20 S/SB S S S S X R R R R R R T 2" - 36" 150 CLASS RF, BUTTERFLY VW-50

24 S/SB S S S S X X X R R R R R T

28 S/SB S S S S X X X X R R R R R T 1/2" - 2" 150 CLASS MONO FLANGE SBB VNI-15

32 S/SB S S S S X X X X R R R R R R T FF x THD

36 S/SB S S S S R R R R X X R R R R R T

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28 32 36


NOTES: 6 SOLID WELD NECK FLANGES SHALL ONLY BE USED WHEN MATING PRESS - TEMP RATING

1. THIS STANDARD IS FOR THE FOLLOWING SERVICE: TO FLAT FACE EQUIPMENTS. TEMPERATURE PRESS. TEMPERATURE PRESS.

7 THREADS ON SCREWED FITTINGS AND PIPE SHALL BE IN PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION ACCORDANCE WITH ASME B1.20.1 °F MAX. °C MAX.

WITH AGS-8. 8. FLANGE FACING FOR FLAT FACE SHALL BE ROUGH FINISH WITH 32 232 0 16

3 DESIGN TO COMPLY WITH ISO 14692 AND JOINT CONSTRUCTION TO 200 232 93 16

SATISFY ABS REQUIREMENTS. 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR

4 USE RP-60 ADHESIVE TWO PART THERMOSETTING ELECTRICALLY BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR

CONDUCTIVE EPOXY OR EQUAL. FOR FRP PIPING SYSTEM. EXPOSED ENDS.

5 FLANGE SUPPLIER SHALL PROVIDE BOLT LENGTH, TORQUE 10. GRP PIPING MATERIAL SHALL CONFIRM TO ASTM D2996 & F1173. MAX HYDROSTATIC TEST LIMITED BY PIPE

TABLES AND CERTIFIED DIMENSIONAL DRAWINGS. A-1-PP-PI-SP-0011A2 28.02.05 Re-issued for Approval PKG BV ARI BMK C 23.02.06 Approved for Construction PKG BV ARI MKS SW



150 / 16 BAR

HVY. HEX. NUTS & METALLIC WASHERS- ASTM A-194 GR 2H

FW, OW, SW, WS, BW, DG, GW

A ROUGHNESS BETWEEN 250µ AND 500µ INCH.




CODE -20/1100 °F 150

ASME B31.3 EXHAUST -29/593 °C - STNL. STL. A11


BUTT - WELDING FITTINGS PIPE SEAMLESS ASME B16.9 ASTM A-403 WP316/316L GATE

SIZE THICKNESS & MATL. SIZE DESCRIPTION CODE

A-312 TP316/316L SIZE ELL TEE RED CAP

1/2" - 1 1/2" SCH 80S SMLS 1/2" - 11/2" SCH 80S SCH 80S SCH 80S SCH 80S

2" - 6" SCH 40S SCH 40S SCH 40S SCH 40S

2" - 6" SCH 40S SMLS 8" - 12" SCH 20 SCH 20 SCH 20 SCH 20

14" - 24" SCH 10 SCH 10 SCH 10 SCH 10

A-358 TP316/316L CLASS 1

8" - 12" SCH 20 EFW (E=1.0)

(100% RADIOGRAPHY)

14" - 24" SCH 10 EFW (E=1.0) OLETS, BRANCH OUTLETS PLUG(100% RADIOGRAPHY) FORGED MSS-SP-97 SIZE DESCRIPTION CODE

1/2" - 11/2" NIPOFLANGE FLG CL 150, RF, ASTM A-182 GR F316/316L TO MATCH PIPE

1/2" - 10" WELDOLET ASTM A-182 GR F316/316L TO MATCH PIPE


FLANGES PER ASME B16.5 ASTM A-182 F316/316L STUD BOLTS - ASTM A-193 GR B7

1/2" - 24" 150 RF WN FLANGE HOT DIP GALVANISED AS PER ASTM A153 1/2" - 2" 150 CLASS RF VB-110-M

(BORE TO MATCH PIPE) HVY. HEX. NUTS - ASTM A-194 GR 2H

HOT DIP GALVANISED AS PER ASTM A153

1/2" - 24" 150 RF BLIND FLANGE GASKET - SPIRAL WOUND WITH 316 SS

WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20

CS BLACK EPOXY COATED CENTERING RING - 0.125" THICK

MISCELLANEOUS ITEMS GLOBESIZE DESCRIPTION SIZE DESCRIPTION CODE


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T

2 N R T LEGEND

3 N R R T N - WELDOLET(WOL) OR NIPOFLANGE(NOF)

4 N N R R T W - WELDOLET(WOL)

6 N N W R R T T - EQUAL TEE

8 N N W W R R T R - REDUCING TEE

10 N N W W W R R T

12 N N W W W R R R T

14 N N W W W W R R R T

16 N N W W W W R R R R T OTHER VALVES18 N N W W W W W R R R R T SIZE DESCRIPTION CODE

20 N N W W W W W R R R R R T

24 N N W W W W W W R R R R R T

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24


NOTES: PRESS - TEMP RATING (NOTE 5)

1. THIS STANDARD IS FOR THE FOLLOWING SERVICE: 5 THE LINES COVERED IN THIS PIPING CLASS SHALL BE FOR TEMPERATURE PRESS. TEMPERATURE PRESS.

EX INTERMITTANT SERVICE ONLY. PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 6 FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB °F MAX. °C MAX.

WITH AGS-8. 7 METAL SEATED BALL VALVES SHALL BE CONSIDERED FOR -20 TO 1100 10 -29 TO 593 0.7

3. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS THIS SERVICE.

8. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR

4. ALL SS MATERIAL SHALL BE DUAL STAMPED TO TYPE SS316/316L, BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR

SOLUTION ANNEALED, ACID PICKLED AND PASSIVATED. EXPOSED ENDS.

A-1-PP-PI-SP-0011 PSIG - 15 BARG - 1.1




BALL (NOTE 6,7)




CODE 75/140 °F 150

ASME B31.3 POTABLE WATER AND CHEMICAL 24/60°C - CPVC A12


SOCKET FITTINGS (1/2" - 6")

PIPE ASTM D2846 CPVC 4120 SOCKET TYPE F439 SCH 80 GATESIZE THICKNESS & MATL. SIZE DESCRIPTION CODE

ASTM D2846 CPVC 4120, F441, PE ELL COUPLING BUSH

TEE PLUG NIPPLE

1/2" - 6" SCH 80 REDUCER UNION SWAGE NIPPLE

CAP

ADAPTER

PLUGSIZE DESCRIPTION CODE

MECHANICAL JOINTS BALLSIZE DESCRIPTION BOLTS & GASKETS (NOTE 5) SIZE DESCRIPTION CODE

MACHINE BOLTS - ASTM A-307 GR B

HOT DIP GALVANISED AS PER ASTM A153 1/2" - 6" 150 CLASS SOCKET END VB-155

1/2" - 6" FLANGE ASTM D2846 CPVC 4120, SOCKET TYPE F439

B16.5 ,150# FF HOT DIP GALVANISED AS PER ASTM A153

GASKET - 1/8" THICK FULL FACE BUTYL RUBBER GASKET B16.21

1/2" - 6" BLIND FLANGE ASTM D2846 CPVC 4120, F439 HARDNESS SHORE-A, 60 DURAMETER & 1/8" PTFE

B16.5 ,150# FF


1/2" - 6" 150 CLASS SOCKET END VGL-136


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T LEGEND

2 R R T T - EQUAL TEE 1/2" - 6" 150 CLASS SOCKET END VC-158

3 X X R T R - REDUCING TEE

4 X X R R T X - REDUCING TEE + REDUCER

6 X X R R R T


1 & SMLR 1 1/2 2 3 4 6



1. THIS STANDARD IS FOR THE FOLLOWING SERVICE: 5 RUBBER GASKET SHALL BE USED FOR POTABLE WATER AND TEMPERATURE PRESS. TEMPERATURE PRESS.

PW, WS, CC, SW, CS, CR PTFE GASKET SHALL BE USED FOR HYPOCHLORITE SERVICE. PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 6 FOR JOINT MATERIAL USE SOLVENT PRIMER FOR CPVC 4120, °F MAX. °C MAX.

WITH AGS-8. GSR 903 OR EQUAL, CEMENT PER ASTM D2564, GSR 940 OR EQUAL. 75 145 24 10

3 FLANGE FACING SHALL BE ROUGH FINISH WITH A ROUGHNESS CEMENT FOR HYPOCHLORITE SERVICE SHALL BE 'WELD-ON' 724 120 130 49 9

OR APPROVED EQUIVALENT INTENDED FOR HYPOCHLORITE 140 100 60 7

4 GIVEN THE RESISTANCE TO UV IS POOR, ALL INSTALLED CPVC SERVICE AND SHALL COMPLY WITH ASTM F493.

SYSTEMS EXPOSED TO ULTRAVOILET RADIATIONS SHALL BE 7 FLANGE VENDOR SHALL PROVIDE BOLT LENGTH, BOLT TORQE

EXTERNALLY PAINTED WITH AN APPROVED PROCEDURE OR TABLES AND CERTIFIED DIMENSIONAL DRAWINGS. MAX HYDROSTATIC TEST LIMITED BY PIPE

SUITABLY SHIELDED FROM UV. A-1-PP-PI-SP-0011 PSIG - 218 BARG - 15




FLANGES (NOTE 7)

HVY. HEX. NUTS & METALLIC WASHERS - ASTM A-563 GR A



1 Oct-05 SERVICE RANGE ALLOW.

CODE FIRE WATER (DRY SYSTEM) 32/200 °F

ASME B31.3/EEMUA 144/ISO 14692 0/93°C - FIBERGLASS A13


SOCKET FITTINGS (UPTO 3/4")


Cu-Ni 90-10 UNS 7060X SMLS ELL THREDOLET NIPPLE 1 1/2" & 150 CLASS THD VG-10


1/2" - 3/4" 2 MM WT REDUCER

GLASS-FIBRE REINFORCED CAP

POLYSILOXANE PHENOLIC (GRP) COUPLING

PLUG

PIPE TO ASTM D2996

1" - 11/2" 3.6 MM WT (NOM.)

2" 3.7 MM WT (NOM.) FILAMENT WOUND FITTINGS (1" & ABOVE)

3" 3.8 MM WT (NOM.) GLASS-FIBRE REINFORCED POLYSILOXANE-PHENOLIC (GRP) PSX-JF OR EQUAL; CONDUCTIVE TO ASTM D5685 PLUG 4" 5.0 MM WT (NOM.) SIZE DESCRIPTION CODE

6" 4.9 MM WT (NOM.) SIZE ELL TEE RED COUPL. NIPPLE DEL. COUPL.

8" 5.5 MM WT (NOM.) 1" - 10" NOTE 3 NOTE 3 NOTE 3 NOTE 3 NOTE 3 NOTE 3

10" 6.2 MM WT (NOM.)


FLANGES (NOTE 5, 6) STUD BOLTS - ASTM A-193 GR B7

1/2" - 3/4" LAP JOINT C/W STUB END TYPE L TO EEMUA 145 CL 150 HOT DIP GALVANISED AS PER ASTM A153 1 1/2" & 150 CLASS FF VB-105

GALVANISED BACKING FLANGE A-105, HVY. HEX. NUTS & METALLIC WASHERS- ASTM A-194 GR 2H SMLR

STUB END Cu-Ni 90-10 UNS 7060X (BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153

GASKET - 1/8" THICK EPDM FULL FACE (FOR FF FLANGES)

1/2" - 3/4" SOLID WELD NECK FF EEMUA 145 CL 150 - 1/8" THK. FLAT RING NAF UNGRAPHITED BOTH SIDES

Cu-Ni 90-10 UNS 7060X (BORE TO MATCH PIPE) (FOR RF FLANGES / LAP JOINTS)

1/2" - 3/4" BLIND FLANGE FF EEMUA 145 CL 150

GALVANISED FLANGE A105 WITH Cu-Ni 90-10 UNS 7060X DISC MISCELLANEOUS ITEMS GLOBESIZE DESCRIPTION SIZE DESCRIPTION CODE

1" - 10" GLASS-FIBRE REINFORCED POLYSILOXANE -PHENOLIC,

1/2" - 2" 150 CLASS FF VGL-137

1" - 10" GLASS-FIBRE REINFORCED POLYSILOXANE -PHENOLIC, 3" - 10" 150 CLASS FF VGL-90

FLANGE B16.5 150# FF


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T LEGEND

2 R R T SB - SADDLE W/90-10 Cu-Ni BUSHED OUTLET 1 1/2" & 150 CLASS FF, PISTON VC-159

3 R/DC R R T SMLR

4 R/DC R R R T T - EQUAL TEE 2" - 10" 150 CLASS FF, WAFER VC-91

6 R/DC R R R R T R - REDUCING TEE

8 R/DC R R R R R T DC - DELUGE COUPLING

10 R/DC R R R R R R T


2" - 10" 150 CLASS RF, BUTTERFLY VW-50

VNI-15

FF x THD

1 & SMLR 1 1/2 2 3 4 6 8 10


NOTES: 5 FLANGE SUPPLIER SHALL PROVIDE BOLT LENGTH, TORQUE PRESS - TEMP RATING

1. THIS STANDARD IS FOR THE FOLLOWING SERVICE: TABLES AND CERTIFIED DIMENSIONAL DRAWINGS. TEMPERATURE PRESS. TEMPERATURE PRESS.

FW (DRY SYSTEM) 6 SOLID WELD NECK FLANGES SHALL ONLY BE USED WHEN MATING PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION TO FLAT FACE EQUIPMENT. °F MAX. °C MAX.

WITH AGS-8. 7. THICKNESS LISTED ARE INDICATIVE AND WILL VARY FROM ONE 32 232 0 16

3 DESIGN TO COMPLY WITH ISO 14692 AND JOINT CONSTRUCTION TO MANUFACTURER TO ANOTHER. 200 232 93 16

SATISFY ABS REQUIREMENTS. 8. FLANGE FACING FOR FLAT FACE SHALL BE ROUGH FINISH WITH

4 GRP PIPING SYSTEM SHALL BE CAPABLE OF WITHSTANDING A JET FIRE

9. GRP PIPING MATERIAL SHALL CONFIRM TO ASTM D2996 & F1173.

EMPTY FOR 5 MINUTES FOLLOWED BY FLOWING FIRE WATER MAX HYDROSTATIC TEST LIMITED BY PIPE

FOR A MIN. OF 15 MINUTES. A-1-PP-PI-SP-0011 PSIG - 348

C 23.02.06 Approved for Construction PKG BV ARI MKS SW

B1 05.10.05 Approved for Design PKG BV ARI BMK SW Arthit Field Development


150 / 16 BAR

PSX-JF OR EQUAL; CONDUCTIVE

PSX-JF OR EQUAL; CONDUCTIVE TO ASTM D4024, B16.5 150# FF

PSX-JF OR EQUAL; CONDUCTIVE TO ASTM D4024, BLIND

(3/4 & SMALLER) BONDSTRAND SADDLE

1/2" - 2" 150 CLASS MONO FLANGE SBB

A ROUGHNESS BETWEEN 250µ AND 500µ INCH.

WITH HEAT FLUX OF 300 KW/M2 IN DRY CONDITIONS i.e INITIALLY

BARG - 24



CODE -20/500 °F 0.125 IN. 150

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/260°C 3.2 MM CARBON STEEL BS1


BUTT - WELDING FITTINGS

PIPE SEAMLESS ASME B16.9 ASTM A-234 WPB GATESIZE THICKNESS & MATL. SIZE DESCRIPTION CODE

A-106 GR B SIZE ELL TEE RED CAP

1/2" SCH XXS SMLS 1/2" SCH XXS SCH XXS SCH XXS SCH XXS

3/4" - 11/2" SCH 160 SCH 160 SCH 160 SCH 160

3/4" - 1 1/2" SCH 160 SMLS 2" SCH 80 SCH 80 SCH 80 SCH 80

3" - 6" SCH 40 SCH 40 SCH 40 SCH 40

API 5L GR B PSL1 8" - 12" SCH 30 SCH 30 SCH 30 SCH 30

2" SCH 80 SMLS 14" - 24" SCH 20 SCH 20 SCH 20 SCH 20

28" - 30" 0.406" 0.406" 0.406" 0.406"

3" - 6" SCH 40 SMLS 36" 0.469" 0.469" 0.469" 0.469"

OLETS, BRANCH OUTLETS PLUG8" - 12" SCH 30 SMLS FORGED MSS-SP-97 SIZE DESCRIPTION CODE

14" SCH 20 SMLS 1/2" - 11/2" NIPOFLANGE FLG CL 150, RF, ASTM A-105 TO MATCH PIPE

1/2" - 14" WELDOLET ASTM A-105 TO MATCH PIPE

16" - 24" SCH 20 SAW (E=0.95)

28" - 30" 0.406" SAW (E=0.95)

36" 0.469" SAW (E=0.95)


FLANGES PER ASME B16.5 ASTM A-105 STUD BOLTS - ASTM A-193 GR B7

HOT DIP GALVANISED AS PER ASTM A153 1/2" - 4" 150 CLASS RF TL = 250 °F VB-60

1/2" - 24" 150 RF WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H

(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 1/2" - 4" VB-60-HT


1" - 3" 300 RF WN FLANGE WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20 6" - 30" 150 CLASS RF TL = 250 °F VB-63


-FOR CONTROL VALVE MAKEUP 6" - 30" VB-63-HT

1/2" - 24" 150 RF BLIND FLANGE MISCELLANEOUS ITEMS GLOBESIZE DESCRIPTION SIZE DESCRIPTION CODE

FLANGES PER ASME B16.47 SERIES A ASTM A-105 1 1/2" & 150 CLASS RF VGL-62

SMLR

150 RF WN FLANGE

(BORE TO MATCH PIPE) 2" - 12" 150 CLASS RF VGL-60

150 RF BLIND FLANGE


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T 1 1/2" & 150 CLASS RF, PISTON VC-120

2 N R T LEGEND SMLR

3 N R R T

4 N N R R T W - WELDOLET(WOL) 2" - 30" 150 CLASS RF, WAFER VC-122



10 N N W W W R R T





24 N N W W W W W W R R R R R T 1/2" - 2" 150 CLASS MONO FLANGE DBB VNI-1

28 N N W W W W W W R R R R R R T RF x THD

30 N N W W W W W W R R R R R R R T

36 N N W W W W W W W W R R R R R R T 2" - 30" 150 CLASS RF, BUTTERFLY VW-1

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28 30 36




6. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS PSIG BARG


WITH AGS-8. 7. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED -20 TO 100 285 -29 TO 38 19.6

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED 8. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 200 260 93 17.9

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 300 230 149 15.9

4. CONTROL VALVE SIZES UP TO AND INCLUDING EXPOSED ENDS. 400 200 204 13.8

THREE INCHES SHALL BE RATED 300 LB ASME 500 170 260 11.7

MINIMUM. MAX HYDROSTATIC TEST LIMITED BY FLANGES





BALL (NOTE 5)

150 CLASS RF TL > 250 °F


28" - 36"

28" - 36"

N - WELDOLET(WOL) OR NIPOFLANGE(NOF)

AG, GC, PG, PL, SG, OW, BD, CF, DP, HF, LF, RV, VG, DG, FG, LO, CS, CR




CODE -20/500 °F 0.125 IN. 150

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/260°C 3.2 MM CARBON STEEL BS1N





SCH XXS SMLS 1/2" SCH XXS SCH XXS SCH XXS SCH XXS

3/4" - 11/2" SCH 160 SCH 160 SCH 160 SCH 160

SCH 160 SMLS 2" SCH 80 SCH 80 SCH 80 SCH 80

3" - 6" SCH 40 SCH 40 SCH 40 SCH 40



3" - 6" SCH 40 SMLS




16" - 24" SCH 20 SAW (E=0.95)



1/2" - 4"


(BORE TO MATCH PIPE) 6" - 24"


1" - 3" 300 RF WN FLANGE


-FOR CONTROL VALVE MAKEUP


1 1/2" & 150 CLASS RF

SMLR

2" - 12" 150 CLASS RF


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T 1 1/2" & 150 CLASS RF, PISTON

2 N R T LEGEND SMLR

3 N R R T

4 N N R R T W - WELDOLET(WOL) 2" - 24" 150 CLASS RF, WAFER



10 N N W W W R R T





24 N N W W W W W W R R R R R T 150 CLASS MONO FLANGE DBB

RF x THD

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24


NOTES: 6. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS PRESS - TEMP RATING

1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: TEMPERATURE PRESS. TEMPERATURE PRESS.

AG, GC, PG, PL, SG, OW, DP 7. ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION IN ACCORDANCE WITH NACE MR0175 LATEST ISSUE & °F MAX. °C MAX.

WITH AGS-8. SPECIFICATION "MATERIAL REQUIREMENTS FOR SOUR SERVICE " -20 TO 100 285 -29 TO 38 19.6

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED DOCU. NO. A-1-GEN-MC-SP-0001 200 260 93 17.9

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 8. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED 300 230 149 15.9

4. CONTROL VALVE SIZES UP TO AND INCLUDING THREE 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 400 200 204 13.8

INCHES SHALL BE RATED 300 LB ASME MINIMUM. BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 500 170 260 11.7

5. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB EXPOSED ENDS. MAX HYDROSTATIC TEST LIMITED BY FLANGES





1/2"

3/4" - 1 1/2"

BALL (NOTE 5)

HOT DIP GALVANISED AS PER ASTM A153 150 CLASS RF TL=2500F VB-60N

HOT DIP GALVANISED AS PER ASTM A153 150 CLASS RF TL=2500F VB-63N


VGL-62N

VGL-60N

VC-120N


VC-122N

1/2" - 2" VNI-1N




CODE -20/500 °F 0.25 IN. 150

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/260°C 6.35 MM CARBON STEEL BS2

PIPE AND FITTINGS




1/2" - 1 1/2" SCH XXS SMLS 1/2" - 11/2" SCH XXS SCH XXS SCH XXS SCH XXS

2" - 3" SCH 160 SCH 160 SCH 160 SCH 160


2" - 3" SCH 160 SMLS 8" - 10" SCH 60 SCH 60 SCH 60 SCH 60

12" - 16" SCH 40 SCH 40 SCH 40 SCH 40


24" SCH XS SCH XS SCH XS SCH XS

8" - 10" SCH 60 SMLS


16" SCH 40 SAW (E=0.95) 1/2" - 11/2" NIPOFLANGE FLG CL 150, RF, ASTM A-105 TO MATCH PIPE

WELDOLET ASTM A-105 TO MATCH PIPE

18" - 20" SCH 30 SAW (E=0.95)

24" SCH XS SAW (E=0.95)


FLANGES PER ASME B16.5 ASTM A-105 STUD BOLTS - ASTM A-193 GR B7 1/2" - 4" 150 CLASS RF TL = 250 °F VB-130


HVY. HEX. NUTS - ASTM A-194 GR 2H 6" - 24" 150 CLASS RF TL = 250 °F VB-131

150 RF WN FLANGE HOT DIP GALVANISED AS PER ASTM A153

(BORE TO MATCH PIPE) GASKET - SPIRAL WOUND WITH 316 SS

300 RF WN FLANGE CS BLACK EPOXY COATED CENTERING RING - 0.125" THICK



MISCELLANEOUS ITEMS GLOBE1/2" - 24" 150 RF BLIND FLANGE SIZE DESCRIPTION SIZE DESCRIPTION CODE

1 1/2" & 150 CLASS RF VGL-120

SMLR

2" - 12" 150 CLASS RF VGL-121


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR

3 N R R T




10 N N W W W R R T





24 N N W W W W W W R R R R R T 150 CLASS MONO FLANGE DBB VNI-3

RF x THD

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24




AG, GC, PG, PL, SG, OW, DP 6. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS PSIG BARG


WITH AGS-8. 7. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED -20 TO 100 285 -29 TO 38 19.6

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED 8. ALL VALVES SHALL BE PROVIDED WITH 6.35 MM (0.25") 200 260 93 17.9

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 CORROSION ALLOWANCE. 300 230 149 15.9

4. CONTROL VALVE SIZES UP TO AND INCLUDING 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 400 200 204 13.8

THREE INCHES SHALL BE RATED 300 LB ASME BOLT TENSIONING DEVICE,C/W PLASTIC END PROTECTOR FOR 500 170 260 11.7

MINIMUM. EXPOSED ENDS. MAX HYDROSTATIC TEST LIMITED BY FLANGES





VALVES (NOTE 8)

1/2" - 10"

BALL (NOTE 5)

1/2" - 24"


1" - 3"


1/2" - 2"




CODE -20/200 °F 150

ASME B31.3 CHEMICAL, POTABLE WATER AND DIESEL -29/93 °C - STNL. STL. B2



PIPE SEAMLESS ASME B16.9 ASTM A-403 WP316/316L GATESIZE THICKNESS & MATL. SIZE DESCRIPTION CODE




2" - 6" SCH 40S SMLS

OLETS, BRANCH OUTLETS PLUGFORGED MSS-SP-97 SIZE DESCRIPTION CODE




FLANGES PER ASME B16.5 ASTM A-182 F316/316L STUD BOLTS - ASTM A-193 GR B7 1/2" - 4" 150 CLASS RF VB-110

1/2" - 6" 150 RF WN FLANGE HOT DIP GALVANISED AS PER ASTM A153

(BORE TO MATCH PIPE) HVY. HEX. NUTS - ASTM A-194 GR 2H 6" 150 CLASS RF VB-134


1" - 3" 300 RF WN FLANGE GASKET - SPIRAL WOUND WITH 316 SS

(BORE TO MATCH PIPE) WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20

-FOR CONTROL VALVE MAKEUP CS BLACK EPOXY COATED CENTERING RING - 0.125" THICK

1/2" - 6" 150 RF BLIND FLANGE



HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T LEGEND 1 1/2" & 150 CLASS RF, PISTON VC-124

2 N R T SMLR

3 N R R T W - WELDOLET(WOL)

4 N N R R T T - EQUAL TEE 2" - 6" 150 CLASS RF, WAFER VC-125

6 N N W R R T R - REDUCING TEE


1/2" - 2" 150 CLASS MONO FLANGE DBB VNI-2

RF x THD

1 & SMLR 1 1/2 2 3 4 6




CC, CI, DF, PW, AV 6. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS PSIG BARG


WITH AGS-8. 7. ALL SS MATERIAL SHALL BE DUAL STAMPED TO TYPE SS316/316L, -20 TO 100 275 -29 TO 38 19

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED SOLUTION ANNEALED, ACID PICKLED AND PASSIVATED. 200 235 93 16.2


4. CONTROL VALVE SIZES UP TO AND INCLUDING

THREE INCHES SHALL BE RATED 300 LB ASME

MINIMUM. MAX HYDROSTATIC TEST LIMITED BY FLANGES





BALL (NOTE 5)





CODE -148/383 °F 150

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -100/195 °C - STNL. STL. B2L







2" - 6" SCH 40S SMLS SCH 20 SCH 20 SCH 20 SCH 20

14" - 20" SCH 10 SCH 10 SCH 10 SCH 10

A-358 TP316/316L CLASS 1

SCH 20 EFW (E=1.0)

(100% RADIOGRAPHY)

SCH 10 EFW (E=1.0) OLETS, BRANCH OUTLETS PLUG(100% RADIOGRAPHY) FORGED MSS-SP-97 SIZE DESCRIPTION CODE




FLANGES PER ASME B16.5 ASTM A-182 F316/316L 1/2" - 4" 150 CLASS RF VB-110-LT


150 RF WN FLANGE 150 CLASS RF VB-134-LT

(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153


150 RF BLIND FLANGE WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20



1 1/2" & 150 CLASS RF VGL-122-LT

SMLR

150 CLASS RF VGL-123-LT


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T

2 N R T LEGEND

3 N R R T




10 N N W W W R R T





1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20



1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 6. ALL SS MATERIAL SHALL BE DUAL STAMPED TO TYPE SS316/316L, TEMPERATURE PRESS. TEMPERATURE PRESS.

RV SOLUTION ANNEALED, ACID PICKLED AND PASSIVATED. PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 7. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED °F MAX. °C MAX.

WITH AGS-8. 8. REQUIRES CERTIFICATE OF COMPLIANCE WITH LOW TEMP. LIMITS ON -148 TO 100 275 -100 TO 38 19

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED AUSTENITIC STNL. STL AS PER ASME B31.3 PARA 323.2.2 AND 323.3. 200 235 93 16.2

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 300 215 149 14.8

4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB 383 198 195 13.7

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS

MAX HYDROSTATIC TEST LIMITED BY FLANGES





8" - 12"

8" - 12"

14" - 20"

BALL (NOTE 4)

STUD BOLTS - ASTM A-320 GR L7

1/2" - 20" HVY. HEX. NUTS - ASTM A-194 GR 4 S3 6" - 18"

1/2" - 20"

2" - 12"





CODE -20/500 °F 150

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/260 °C - STNL. STL. B2N








14" - 36" SCH 10 SCH 10 SCH 10 SCH 10

A-358 TP316/316L CLASS 1

8" - 12" SCH 20 EFW (E=1.0)

(100% RADIOGRAPHY)





FLANGES PER ASME B16.5 ASTM A-182 F316/316L STUD BOLTS - ASTM A-193 GR B7 1/2" - 4" VB-110N


1/2" - 24" 150 RF WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H 6" - 24" VB-134N



1" - 3" 300 RF WN FLANGE WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20




FLANGES PER ASME B16.47 SERIES A ASTM A-182 F316/316L 1 1/2" & 150 CLASS RF VGL-122N

SMLR

28" - 36" 150 RF WN FLANGE 2" - 12" 150 CLASS RF VGL-123N


28" - 36" 150 RF BLIND FLANGE


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T 1 1/2" & 150 CLASS RF, PISTON VC-124N

2 N R T LEGEND SMLR


4 N N R R T W - WELDOLET(WOL) 2" - 24" 150 CLASS RF, WAFER VC-125N



10 N N W W W R R T





24 N N W W W W W W R R R R R T 1/2" - 2" 150 CLASS MONO FLANGE DBB VNI-2N



36 N N W W W W W W W W R R R R R R T

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28 30 36


NOTES: 6. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB PRESS - TEMP RATING


AG, GC, PG, PL, SG, OW SOLUTION ANNEALED, ACID PICKLED AND PASSIVATED. PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 8. ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED IN °F MAX. °C MAX.

WITH AGS-8. ACCORDANCE WITH NACE MR0175 LATEST ISSUE & SPECIFICATION -20 TO 100 275 -29 TO 38 19

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED "MATERIAL REQUIREMENTS FOR SOUR SERVICE " DOCUMENT NO. 200 235 93 16.2

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 A-1-GEN-MC-SP-0001 300 215 149 14.8

4. CONTROL VALVE SIZES UP TO AND INCLUDING THREE 9. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED 400 195 204 13.4

INCHES SHALL BE RATED 300 LB ASME MINIMUM. 10. BOLT SIZES 11/8"DIA & LARGER TO BE ONE BOLT DIA LONGER FOR BOLT 500 170 260 11.7

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS TENSIONING DEVICE,C/W PLASTIC END PROTECTOR FOR EXPOSED ENDS. MAX HYDROSTATIC TEST LIMITED BY FLANGES





BALL (NOTE 6)

150 CLASS RF TL=2500F





CODE HYDROCARBONS LIQUID AND VAPOR -50/500 °F 0.125 IN. 150

ASME B31.3 (LOW TEMP) -46/260 °C 3.2 MM LT CARBON STEEL B3S1



PIPE SEAMLESS ASME B16.9 ASTM A-420 WPL6 GATESIZE THICKNESS & MATL. SIZE DESCRIPTION CODE

A-333 GR 6 SIZE ELL TEE RED CAP

1/2" SCH XXS SMLS 1/2" SCH XXS SCH XXS SCH XXS SCH XXS

3/4" - 1 1/2" SCH 160 SMLS 3/4" - 11/2" SCH 160 SCH 160 SCH 160 SCH 160

2" SCH XS SMLS 2" SCH XS SCH XS SCH XS SCH XS

3" - 6" SCH STD SMLS 3" - 6" SCH STD SCH STD SCH STD SCH STD


28" SCH XS SCH XS SCH XS SCH XS

A-671 GR CC65 CL22 S2 30" SCH STD SCH STD SCH STD SCH STD

16" - 24" SCH 20 EFW (E=1.0) 32" 0.406" 0.406" 0.406" 0.406"

(100% RADIOGRAPHY) OLETS, BRANCH OUTLETS PLUG28" FORGED MSS-SP-97 SIZE DESCRIPTION CODE

(NOTE 9) (100% RADIOGRAPHY)

1/2" - 11/2" NIPOFLANGE FLG CL 150, RF, ASTM A-350 GR LF2 TO MATCH PIPE

30" SCH STD EFW (E=1.0) 1/2" - 12" WELDOLET ASTM A-350 GR LF2 TO MATCH PIPE

(100% RADIOGRAPHY)

32" 0.406" EFW (E=1.0)

(100% RADIOGRAPHY)


FLANGES PER ASME B16.5 ASTM A-350 LF2 STUD BOLTS - ASTM A-320 GR L7

HOT DIP GALVANISED AS PER ASTM A153 1/2" - 4" 150 CLASS RF VB-60-LT

1/2" - 24" 150 RF WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 4 S3

(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 150 CLASS RF VB-63-LT


1" - 3" 300 RF WN FLANGE WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20




FLANGES PER ASME B16.47 SERIES A ASTM A-350 LF2

1 1/2" & 150 CLASS RF VGL-62-LT

28" - 32" 150 RF WN FLANGE SMLR


2" - 12" 150 CLASS RF VGL-60-LT



HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T 1 1/2" & 150 CLASS RF, PISTON VC-120-LT

2 N R T LEGEND SMLR

3 N R R T

4 N N R R T W - WELDOLET(WOL) 150 CLASS RF, WAFER VC-122-LT



10 N N W W W R R T





24 N N W W W W W W R R R R R T 1/2" - 2" 150 CLASS MONOFLANGE DBB VNI-1-LT

28 N N W W W W W W R R R R R R T RF X THD


32 N N W W W W W W W R R R R R R R T

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28 30 32




7. BALL VALVES SHALL BE DESIGNATED "LT" FOR LOW TEMP. SEALS. PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 8. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR °F MAX. °C MAX.

WITH AGS-8. BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR -50 TO 100 285 -46 TO 38 19.6

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED EXPOSED ENDS. 200 260 93 17.9

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 9. THICKNESS OF 28" HP FLARE HEADER PIPE HAS BEEN CHANGED 300 230 149 15.9

4. CONTROL VALVE SIZES UP TO AND INCLUDING FROM 0.375" TO SCH XS (THK. 0.5") TO OVERCOME ACOUSTIC 400 200 204 13.8

THREE INCHES SHALL BE RATED 300 LB ASME FATIGUE PROBLEM BASED ON ACOUSTIC INDUCED VIBRATION 500 170 260 11.7

MINIMUM. STUDY RECOMMENDATION. MAX HYDROSTATIC TEST LIMITED BY FLANGES

5. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB A-1-PP-PI-SP-0011 PSIG - 428 BARG - 30




SCH XS EFW (E=1.0)

BALL (NOTE 5)

6" - 32"


2" - 32"


GC, PG, PL, SG, OW, DP, HF, CF, BD


1 Jul-04 SERVICE 'RANGE ALLOW.

CODE -20/500 °F 150

ASME B31.3 HYDROCARBONS AND LIQUID VAPOR -29/260 °C - DUPLEX SS B4N


BUTT - WELDING FITTINGS PIPE SEAMLESS ASME B16.9 ASTM A-815 UNS S31803 GATE


A-790 DUPLEX SS SIZE ELL TEE RED CAP

UNS S31803 1/2" - 11/2" SCH 80S SCH 80S SCH 80S SCH 80S

1/2" - 1 1/2" SCH 80S SMLS 2" - 6" SCH 40S SCH 40S SCH 40S SCH 40S

8" - 12" SCH 20 SCH 20 SCH 20 SCH 20


8" - 12" SCH 20 EFW (E=1.0)

(100% RADIOGRAPHY)


1/2" - 11/2" NIPOFLANGE FLG CL 150, RF, ASTM A-182 GR F51 TO MATCH PIPE

1/2" - 10" WELDOLET ASTM A-182 GR F51 TO MATCH PIPE


FLANGES PER ASME B16.5 ASTM A-182-F51 STUDBOLTS - ASTM A-193 GR.B7 1/2" - 4" VB-132N

DUPLEX SS UNS S31803 HOT DIP GALVANISED AS PER ASTM A153

HVY. HEX. NUTS - ASTM A-194 GR 2H 6" - 24" VB-133N

1/2" - 24" 150 RF WN FLANGE HOT DIP GALVANISED AS PER ASTM A153


1/2" - 24" 150 RF BLIND FLANGE RING AND CS BLACK EPOXY COATED CENTERING RING-0.125" THICK

1" - 3" 300 RF WN FLANGE

(BORE TO MATCH PIPE) MISCELLANEOUS ITEMS GLOBE-FOR CONTROL VALVE MAKEUP SIZE DESCRIPTION SIZE DESCRIPTION CODE

1 1/2" & 150 CLASS RF VGL-124N

SMLR

2" - 12" 150 CLASS RF VGL-125N


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR

3 N R R T




10 N N W W W R R T





24 N N W W W W W W R R R R R T 1/2" - 2" 150 CLASS MONO FLANGE DBB VNI-4N

RF x THD

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24




AG, GC, PG, PL, SG, OW 7. ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED IN PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION ACCORDANCE WITH NACE MR0175 LATEST ISSUE & SPECIFICATION °F MAX. °C MAX.

WITH AGS-8. "MATERIAL REQUIREMENTS FOR SOUR SERVICE " DOCUMENT NO. -20 TO 100 290 -29 TO 38 20

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED A-1-GEN-MC-SP-0001 200 260 93 17.9


4. CONTROL VALVE SIZES UP TO AND INCLUDING 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 400 200 204 13.8

THREE INCHES SHALL BE RATED 300 LB ASME BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 500 170 260 11.7

MINIMUM. EXPOSED ENDS. MAX HYDROSTATIC TEST LIMITED BY FLANGES

5. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB A-1-PP-PI-SP-0011 PSIG - 435 BARG - 30




BALL (NOTE 5)



GASKET - SPIRAL WOUND WITH DUPLEX WINDING & GRAFOIL FILLED

FLEXITALLIC STYLE CGI OR EQUAL PER ASME B16.20, DUPLEX INNER




1 Jul-04 SERVICE RANGE ALLOW. (SEE NOTE 3)

CODE -20/680 °F 0.063 IN 150

ASME B31.3 HEAT MEDIUM -29/360 °C 1.6 MM CARBON STEEL B5





1/2" - 3/4" SCH 160 SMLS 1/2" - 3/4" SCH 160 SCH 160 SCH 160 SCH 160

1" - 2" SCH XS SCH XS SCH XS SCH XS

1" - 1 1/2" SCH XS SMLS 3" - 10" SCH STD SCH STD SCH STD SCH STD

API 5L GR B PSL1

2" SCH XS SMLS

3" - 10" SCH STD SMLS


1/2" - 11/2" NIPOFLANGE FLG CL 300, RF, ASTM A-105 TO MATCH PIPE



FLANGES PER ASME B16.5 ASTM A-105 STUD BOLTS - ASTM A-193 GR B7 1/2" - 4" 300 CLASS RF VB-137-M


1/2" - 10" 300 RF WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H 6" - 10" 300 CLASS RF VB-138-M



1/2" - 10" 300 RF BLIND FLANGE WINDING & FLEXITE SUPER FILLEROR EQUAL, PER ASME B16.20



1 1/2" & 300 CLASS RF VGL-67

SMLR

2" - 10" 300 CLASS RF VGL-65


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR

3 N R R T




10 N N W W W R R T


1/2" - 2" 300 CLASS MONOFLANGE DBB VNI-8

RF X THD

1 & SMLR 1 1/2 2 3 4 6 8 10



1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 6. METAL SEATED BALL VALVES SHALL BE CONSIDERED TEMPERATURE PRESS. TEMPERATURE PRESS.

FOR THIS SERVICE PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 7. ONLY 300 ASME FLANGES ALLOWED. °F MAX. °C MAX.

WITH AGS-8. 8. ALL FLANGES IN THIS SERVICE SHALL BE 300 ASME RF. -20 TO 100 285 -29 TO 38 19.6

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED 9. BOLTS FOR ALL SIZES TO BE ONE BOLT DIA LONGER FOR 200 260 93 17.9


4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB EXPOSED ENDS. 400 / 500 200 / 170 204 / 260 13.8/11.7

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS 600 / 680 140 / 116 260 / 360 9.6 / 8

MAX HYDROSTATIC TEST LIMITED BY PIPE





1/2" - 4"

BALL (NOTE 4, 6)


HS, HR, VG, RV



1 Feb-05 SERVICE RANGE ALLOW.

CODE -20/300 °F 150

ASME B31.3 SEA WATER -29/149 °C - 6 MOLY STNL. STL. B12 (NOTE 6)

PIPE AND FITTINGS


PIPE GATESIZE THICKNESS & MATL. SIZE DESCRIPTION CODE

A-312 S31254 SIZE ELL TEE RED CAP


2" - 6" SCH 40S SMLS 2" - 6" SCH 40S SCH 40S SCH 40S SCH 40S

8" - 12" SCH 20 SCH 20 SCH 20 SCH 20

A-358 S31254 CLASS 1 OR 3 14" - 24" SCH 10S SCH 10S SCH 10S SCH 10S

8" - 12" SCH 20 EFW (E=1.0) 28" SCH 10 SCH 10 SCH 10 SCH 10

(100% RADIOGRAPHY)

14" - 24" SCH 10S EFW (E=1.0)

(100% RADIOGRAPHY) OLETS, BRANCH OUTLETS PLUGFORGED MSS-SP-97 SIZE DESCRIPTION CODE

28" SCH 10 EFW (E=1.0) 1/2" - 11/2" NIPOFLANGE FLG CL 150, FF, ASTM A-182 GR F44 TO MATCH PIPE

(100% RADIOGRAPHY) 1/2" - 10" WELDOLET ASTM A-182 GR F44 TO MATCH PIPE

MECHANICAL JOINTS BALL SIZE DESCRIPTION BOLTS & GASKETS SIZE DESCRIPTION CODE

STUD BOLTS - ASTM A-193 GR B7


1/2" - 24" 150 FF WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H


GASKET - 1/8" THK. FULL FACE OR FLAT RING ASME B16.21;

1/2" - 24" 150 FF BLIND FLANGE NAF UNGRAPHITED BOTH SIDES

INSULATING GASKET SET -( SEE NOTE 4)

FLANGES PER ASME B16.47 SERIES A ASTM A-182-F44

28" 150 FF WN FLANGE MISCELLANEOUS ITEMS GLOBE(BORE TO MATCH PIPE) SIZE DESCRIPTION SIZE DESCRIPTION CODE

28" 150 FF BLIND FLANGE


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T

2 N R T LEGEND





10 N N W W W R R T






28 N N W W W W W W R R R R R R T

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28



1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 5 BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR TEMPERATURE PRESS. TEMPERATURE PRESS.

WS BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION EXPOSED ENDS. °F MAX. °C MAX.

WITH AGS-8. 6 THIS PIPING MATERIAL CLASS SHALL BE USED ONLY FOR SEA -20 TO 100 290 -29 TO 38 20

3. FLANGE FACING SHALL BE ROUGH FINISH WITH A ROUGHNESS WATER PUMP DISCHARGE LINE. 200 260 93 17.9

7 REFER SPEC. A7 FOR VALVE DETAILS. 300 230 149 15.9

4. USE INSULATING GASKET SET FOR JUNCTION OF COPPER 8 ALL SS MATERIAL SHALL BE SOLUTION ANNEALED, ACID PICKLED

NICKEL/Ni-AL-BR FLANGES OR VALVES (SPEC A7) TO 6 MOLY AND PASSIVATED.

FLANGES (SPEC B12).

ALL STUD BOLTS SHALL HAVE SLEEVES AND WASHERS. MAX HYDROSTATIC TEST LIMITED BY FLANGES

A-1-PP-PI-SP-0011B1 05.10.05 Approved for Design PKG BV ARI BMK SW

A2 28.02.05 Re-issued for Approval PKG BV ARI BMK C 23.02.06 Approved for Construction PKG BV ARI MKS SW Arthit Field Development


VALVES (NOTE 7)

SEAMLESS ASME B16.9 ASTM A-403 WP S31254

FLANGES PER ASME B16.5 ASTM A-182 F44





CODE -20/500 °F 0.125 IN. 300

ASME B31.3 HYDROCARBONS AND LIQUID VAPOR -29/260 °C 3.2 MM. CARBON STEEL CS1






2" - 3" SCH 160 SCH 160 SCH 160 SCH 160

API 5L GR B PSL1 4" - 6" SCH XS SCH XS SCH XS SCH XS

2" - 3" SCH 160 SMLS 8" SCH 60 SCH 60 SCH 60 SCH 60


4" - 6" SCH XS SMLS 14" SCH 40 SCH 40 SCH 40 SCH 40

8" SCH 60 SMLS

OLETS, BRANCH OUTLETS PLUG10" - 12" SCH XS SMLS FORGED MSS-SP-97 SIZE DESCRIPTION CODE




FLANGES PER ASME B16.5 ASTM A-105 STUD BOLTS - ASTM A-193 GR B7 1/2" - 4" VB-65


1/2" - 14" 300 RF WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H 1/2" - 4" VB-65-HT


GASKET - SPIRAL WOUND WITH 316 SS 6" - 14" VB-135

1/2" - 14" 300 RF BLIND FLANGE

CS BLACK EPOXY COATED CENTERING RING - 0.125" THICK 6" - 14" VB-135-HT


1 1/2" & 300 CLASS RF VGL-67

SMLR

2" - 12" 300 CLASS RF VGL-65


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR





10 N N W W W R R T



OTHER VALVES SIZE DESCRIPTION CODE

300 CLASS MONO FLANGE DBB VNI-5

RF x THD

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14



1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 6. HT- HIGH TEMPERATURE SEALS TEMPERATURE PRESS. TEMPERATURE PRESS.

GC, PG, PL, SG, OW, DP, FG 7. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED PSIG BARG






5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS 500 600 260 41.4






BALL (NOTE 4)

300 CLASS RF TL= 2500F

300 CLASS RF TL>2500F




1/2" - 2"




CODE -20/500 °F 0.125 IN. 300

ASME B31.3 HYDROCARBONS AND LIQUID VAPOR -29/260 °C 3.2 MM. CARBON STEEL CS1N






2" - 3" SCH 160 SCH 160 SCH 160 SCH 160

API 5L GR B PSL1 4" - 6" SCH XS SCH XS SCH XS SCH XS



4" - 6" SCH XS SMLS 14" SCH 40 SCH 40 SCH 40 SCH 40

8" SCH 60 SMLS

OLETS, BRANCH OUTLETS PLUG10" - 12" SCH XS SMLS FORGED MSS-SP-97 SIZE DESCRIPTION CODE




FLANGES PER ASME B16.5 ASTM A-105 1/2" - 4" VB-65N

1/2" - 14" 300 RF WN FLANGE 6" - 14" VB-135N



1/2" - 14" 300 RF BLIND FLANGE WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20



1 1/2" & 300 CLASS RF VGL-67N

SMLR

2" - 12" 300 CLASS RF VGL-65N


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR





10 N N W W W R R T



OTHER VALVES SIZE DESCRIPTION CODE

300 CLASS MONO FLANGE DBB VNI-5N

RF x THD

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14



1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 6. ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED TEMPERATURE PRESS. TEMPERATURE PRESS.

GC, PG, PL, SG, OW, DP IN ACCORDANCE WITH NACE MR0175 LATEST ISSUE & PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION SPECIFICATION "MATERIAL REQUIREMENTS FOR SOUR SERVICE " °F MAX. °C MAX.

WITH AGS-8. DOCUMENT NO. A-1-GEN-MC-SP-0001 -20 TO 100 740 -29 TO 38 51.0

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED 7. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED 200 675 93 46.5

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 8. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 300 655 149 45.2

4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 400 635 204 43.8

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS EXPOSED ENDS. 500 600 260 41.4






BALL (NOTE 4)

STUD BOLTS - ASTM A-193 GR B7 300 CLASS RF TL=2500F


HVY. HEX. NUTS - ASTM A-194 GR 2H 300 CLASS RF TL=2500F


1/2" - 2"



1 Sep-04 SERVICE RANGE ALLOW.

CODE -20/500 °F 300

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/260 °C - STNL. STL. C2







8" - 10" SCH 20 SCH 20 SCH 20 SCH 20

A-358 TP316/316L CLASS 1

8" - 10" SCH 20 EFW (E=1.0)

(100% RADIOGRAPHY)






HOT DIP GALVANISED AS PER ASTM A153 1/2" - 4" VB-113


(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 6" - 10" VB-114

GASKET - SPIRAL WOUND WITH 316 SS WINDING & GRAFOIL

1/2" - 10" 300 RF BLIND FLANGE FILLED FLEXITALLIC STYLE CGI OR EQUAL PER ASME B16.20,

316 SS INNER RING AND CS BLACK EPOXY COATED CENTERING

RING-0.125" THICK


1 1/2" & 300 CLASS RF VGL-126

SMLR

2" - 10" 300 CLASS RF VGL-115


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR

3 N R R T 2" - 10" 300 CLASS RF, WAFER VC-130




10 N N W W W R R T OTHER VALVESSIZE DESCRIPTION CODE

300 CLASS MONO FLANGE DBB VNI-7

RF x THD

1 & SMLR 1 1/2 2 3 4 6 8 10




FG SOLUTION ANNEALED, ACID PICKLED AND PASSIVATED. PSIG BARG


WITH AGS-8. 8. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR -20 TO 100 720 -29 TO 38 49.6

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 200 620 93 42.7

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 EXPOSED ENDS. 300 560 149 38.6


5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS 500 480 260 33






BALL (NOTE 4)




1/2" - 2"




CODE -20/500 °F 300

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/260 °C - STNL. STL. C2N







8" - 10" SCH 20 SCH 20 SCH 20 SCH 20

A-358 TP316/316L CLASS 1 12" - 20" SCH 30 SCH 30 SCH 30 SCH 30

8" - 10" SCH 20 EFW (E=1.0) 24" SCH XS SCH XS SCH XS SCH XS

(100% RADIOGRAPHY) 28" - 30" SCH 30 SCH 30 SCH 30 SCH 30

12" - 20" SCH 30 EFW (E=1.0)

(100% RADIOGRAPHY)

24" SCH XS EFW (E=1.0) OLETS, BRANCH OUTLETS PLUG(100% RADIOGRAPHY) FORGED MSS-SP-97 SIZE DESCRIPTION CODE

28" - 30" SCH 30 EFW (E=1.0)

(100% RADIOGRAPHY) 1/2" - 11/2" NIPOFLANGE FLG CL 300, RF, ASTM A-182 GR F316/316L TO MATCH PIPE




HOT DIP GALVANISED AS PER ASTM A153 1/2" - 4" VB-113N


(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 6" - 30" VB-114N


1/2" - 24" 300 RF BLIND FLANGE FILLED FLEXITALLIC STYLE CGI OR EQUAL PER ASME B16.20, 1/2" - 4" VB-113N-HT


FLANGES PER ASME B16.47 SERIES A ASTM A-182 F316/316L RING-0.125" THICK 6" - 30" VB-114N-HT

28" - 30" 300 RF WN FLANGE MISCELLANEOUS ITEMS GLOBE(BORE TO MATCH PIPE) SIZE DESCRIPTION SIZE DESCRIPTION CODE

1 1/2" & 300 CLASS RF VGL-126N

28" - 30" 300 RF BLIND FLANGE SMLR

2" - 12" 300 CLASS RF VGL-115N


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR

3 N R R T 2" - 30" 300 CLASS RF, WAFER VC-130N


6 N N W R R T T - EQUAL TEE 8" 300 CLASS RF, NON SLAM CHECK VC-161N


10 N N W W W R R T OTHER VALVES12 N N W W W R R R T SIZE DESCRIPTION CODE


16 N N W W W W R R R R T 300 CLASS MONO FLANGE DBB VNI-7N

18 N N W W W W W R R R R T RF x THD



28 N N W W W W W W R R R R R R T


1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28 30


NOTES: 6. ALL SS MATERIAL SHALL BE DUAL STAMPED TO TYPE SS316/316L, PRESS - TEMP RATING

1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: SOLUTION ANNEALED, ACID PICKLED AND PASSIVATED. TEMPERATURE PRESS. TEMPERATURE PRESS.

GC, PG, PL, SG, OW, DP 7. ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION IN ACCORDANCE WITH NACE MR0175 LATEST ISSUE & °F MAX. °C MAX.

WITH AGS-8. SPECIFICATION "MATERIAL REQUIREMENTS FOR SOUR SERVICE " -20 TO 100 720 -29 TO 38 49.6

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED DOCUMENT NO. A-1-GEN-MC-SP-0001 200 620 93 42.7


4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 400 515 204 35.5

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 500 480 260 33

EXPOSED ENDS. MAX HYDROSTATIC TEST LIMITED BY FLANGES





BALL (NOTE 4)






1/2" - 2"




CODE HYDROCARBONS LIQUID AND VAPOR -50/500 °F 0.125 IN 300

ASME B31.3 (LOW TEMP) -46/260 °C 3.2 MM LT CARBON STEEL





1/2" - 3/4" 1/2" - 3/4" SCH XXS SCH XXS SCH XXS SCH XXS

1" - 11/2" SCH 160 SCH 160 SCH 160 SCH 160

1" - 11/2" SCH 160 SMLS 2" - 12" SCH XS SCH XS SCH XS SCH XS

14" SCH 40 SCH 40 SCH 40 SCH 40

2" - 12" SCH XS SMLS 16" - 18" SCH XS SCH XS SCH XS SCH XS

20" - 24" SCH 40 SCH 40 SCH 40 SCH 40

14" SCH 40 SMLS

A-671 GR CC65 CL22 S2 OLETS, BRANCH OUTLETS PLUG16" - 18" SCH XS EFW (E=1.0) FORGED MSS-SP-97 SIZE DESCRIPTION CODE

(100% RADIOGRAPHY)

1/2" - 11/2" NIPOFLANGE FLG CL 300, RF, ASTM A-350 GR LF2 TO MATCH PIPE

20" - 24" SCH 40 EFW (E=1.0) 1/2" - 10" WELDOLET ASTM A-350 GR LF2 TO MATCH PIPE

(100% RADIOGRAPHY)



HOT DIP GALVANISED AS PER ASTM A153 1/2" - 4" VB-65-LT


(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 6" - 24" VB-66-LT





1 1/2" & 300 CLASS RF VGL-67-LT

SMLR

2" - 12" 300 CLASS RF VGL-65-LT


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR


4 N N R R T W - WELDOLET(WOL) 2" - 24" 300 CLASS RF, WAFER VC-128-LT



10 N N W W W R R T





24 N N W W W W W W R R R R R T 300 CLASS MONOFLANGE DBB VNI-5-LT

RF x THD

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24



1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 6. BALL VALVES SHALL BE DESIGNATED "LT" FOR LOW TEMPERATURE PRESS. TEMPERATURE PRESS.

GC, PG, PL, SG, OW, DP TEMPERATURE SEALS. PSIG BARG


WITH AGS-8. 8. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR -50 TO 100 740 -46 TO 38 51.0

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 200 675 93 46.5

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 EXPOSED ENDS. 300 655 149 45.2








C3S1

SCH XXS SMLS

BALL (NOTE 4)



1/2" - 2"




CODE -20/500 °F 300

ASME B31.3 HYDROCARBONS AND LIQUID VAPOR -29/260 °C - DUPLEX SS




A-790 DUPLEX SS SIZE ELL TEE RED CAP


SCH 80S SMLS 2" - 6" SCH 40S SCH 40S SCH 40S SCH 40S

8" - 30" SCH 20 SCH 20 SCH 20 SCH 20


8" - 30" SCH 20 EFW (E=1.0)

(100% RADIOGRAPHY)


1/2" - 11/2" NIPOFLANGE FLG CL 300, RF, ASTM A-182 GR F51 TO MATCH PIPE



FLANGES PER ASME B16.5 ASTM A-182-F51 STUDBOLTS - ASTM A-193 GR.B7

DUPLEX SS UNS S31803 HOT DIP GALVANISED AS PER ASTM A153 1/2" - 4" VB-98N

HVY. HEX. NUTS - ASTM A-194 GR 2H

1/2" - 24" 300 RF WN FLANGE HOT DIP GALVANISED AS PER ASTM A153 6" - 30" VB-136N




DUPLEX SS UNS S31803 MISCELLANEOUS ITEMS GLOBESIZE DESCRIPTION SIZE DESCRIPTION CODE

28" - 30" 300 RF WN FLANGE

(BORE TO MATCH PIPE) 1 1/2" & 300 CLASS RF VGL-127N

SMLR


2" - 12" 300 CLASS RF VGL-99N


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR

3 N R R T




10 N N W W W R R T





24 N N W W W W W W R R R R R T 300 CLASS MONOFLANGE DBB VNI-6N



1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28 30








IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 8. METAL SEATED BALL VALVE TAG SHALL BE VB-XXX-M 300 665 149 45.9

4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 400 615 204 42.4

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 500 575 260 39.6






C4N

1/2" - 1 1/2"

BALL (NOTE 4, 8)






1/2" - 2"




CODE -20/680 °F 0.063 IN 300

ASME B31.3 HEAT MEDIUM -29/360 °C 1.6 MM. CARBON STEEL C5






2" - 12" SCH STD SCH STD SCH STD SCH STD


2" - 12" SCH STD SMLS 18" SCH XS SCH XS SCH XS SCH XS

14" - 16" SCH 40 SMLS SEAMLESS ASME B16.9 ASTM A-420 WPL6

20" - 24" SCH 30 SCH 30 SCH 30 SCH 30

18" SCH XS SMLS

OLETS, BRANCH OUTLETS PLUGA671 GR CC65 CL22 S2 FORGED MSS-SP-97 SIZE DESCRIPTION CODE

20" - 24" SCH 30 EFW (E=1.0)

(100% RADIOGRAPHY) 1/2" - 11/2" NIPOFLANGE FLG CL 300, RF, ASTM A-105 TO MATCH PIPE



FLANGES PER ASME B16.5 ASTM A-105 STUD BOLTS - ASTM A-193 GR B7 1/2" - 4" 300 CLASS RF VB-137-M


1/2" - 18" 300 RF WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H 6" - 24" 300 CLASS RF VB-138-M





FLANGES PER ASME B16.5 ASTM A-350 LF2

20" - 24" 300 RF WN FLANGE MISCELLANEOUS ITEMS GLOBE(BORE TO MATCH PIPE) SIZE DESCRIPTION SIZE DESCRIPTION CODE

20" - 24" 300 RF BLIND FLANGE 1 1/2" & 300 CLASS RF VGL-67

SMLR

2" - 12" 300 CLASS RF VGL-65


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR

3 N R R T




10 N N W W W R R T





24 N N W W W W W W R R R R R T 1/2" - 2" 300 CLASS MONOFLANGE DBB VNI-8

RF X THD

1/2" - 2" 300 CLASS RF INTEGRAL DBB VBI-8

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24




HS, HR FOR THIS SERVICE PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 7. BOLTS FOR ALL SIZES TO BE ONE BOLT DIA LONGER FOR °F MAX. °C MAX.




4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB 400/500 635/600 204/260 43.8/41.4

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS 600/680 550/535 315/360 37.9/36.9






1/2" - 10"

BALL (NOTE 4)





CODE -20/500 °F 0.125 IN 600

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/260 °C 3.2 MM CARBON STEEL JS1



PIPE GATESIZE THICKNESS & MATL. SEAMLESS ASME B16.9 ASTM A-234 WPB SIZE DESCRIPTION CODE


SCH XXS SMLS 1/2" - 11/2" SCH XXS SCH XXS SCH XXS SCH XXS

2" SCH 160 SCH 160 SCH 160 SCH 160


2" SCH 160 SMLS

SEAMLESS ASME B16.9 ASTM A-420 WPL6

SCH 80 SMLS 10" - 24" SCH 80 SCH 80 SCH 80 SCH 80

28" 1.25" 1.25" 1.25" 1.25"

A-333 GR 6

10" - 14" SCH 80 SMLS OLETS, BRANCH OUTLETS PLUGFORGED MSS-SP-97 SIZE DESCRIPTION CODE

A-671 GR CC65 CL22 S2


SCH 80 EFW (E=1.0) WELDOLET ASTM A-105 TO MATCH PIPE

(100% RADIOGRAPHY) 10" WELDOLET ASTM A-350 Gr LF2 TO MATCH PIPE

28" 1.25" EFW (E=1.0)

(100% RADIOGRAPHY)



600 RF WN FLANGE HOT DIP GALVANISED AS PER ASTM A153 1/2" - 3" VB-70

(BORE TO MATCH PIPE) HVY. HEX. NUTS - ASTM A-194 GR 2H

HOT DIP GALVANISED AS PER ASTM A153 VB-77

600 RF BLIND FLANGE GASKET - SPIRAL WOUND WITH 316 SS

FLANGES PER ASME B16.5 ASTM A-350 Gr LF2 CS BLACK EPOXY COATED CENTERING RING - 0.125" THICK

600 RF WN FLANGE


MISCELLANEOUS ITEMS GLOBE600 RF BLIND FLANGE SIZE DESCRIPTION SIZE DESCRIPTION CODE

1 1/2" & 600 CLASS RF VGL-74

FLANGES PER ASME B16.47 SERIES A ASTM A-350 LF2 SMLR

28" 600 RF WN FLANGE

(BORE TO MATCH PIPE) 2" - 3" 600 CLASS RF VGL-70

28" 600 RF BLIND FLANGE 4" - 12" 600 CLASS RF VGL-76


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR

3 N R R T

4 N N R R T W - WELDOLET(WOL) 600 CLASS RF, WAFER VC-135



10 N N W W W R R T





24 N N W W W W W W R R R R R T 600 CLASS MONOFLANGE DBB VNI-9


600 CLASS RF INTEGRAL DBB VBI-5

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28



1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 6. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED TEMPERATURE PRESS. TEMPERATURE PRESS.

GC, PG, PL, SG, OW, DP 7. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR °F MAX. °C MAX.

WITH AGS-8. EXPOSED ENDS. -20 TO 100 1480 -29 TO 38 102.0

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED 200 1350 93 93.1









1/2" - 1 1/2"

3" - 8"

16" - 24" 1/2" - 8"

BALL (NOTE 4)

1/2" - 8" 600 CLASS RF TL=2500F

4" - 28" 600 CLASS RF TL=2500F

1/2" - 8"


10" - 24"

10" - 24"


2" - 28"

1/2" - 2"

1/2" - 2"


SHEET No. ISSUE DATE TEMP. CORR. CLASS


CODE -20/500 °F 0.25 IN 600

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/260 °C 6.35 MM CARBON STEEL

PIPE AND FITTINGS


PIPE GATESIZE THICKNESS & MATL. SEAMLESS ASME B16.9 ASTM A-234 WPB SIZE DESCRIPTION


SCH XXS SMLS 1/2" - 11/2" SCH XXS SCH XXS SCH XXS SCH XXS

2" SCH XXS SCH XXS SCH XXS SCH XXS

API 5L GR B PSL1 3" SCH 160 SCH 160 SCH 160 SCH 160

2" SCH XXS SMLS


3" SCH 160 SMLS 4" SCH 160 SCH 160 SCH 160 SCH 160

6" - 10" SCH 120 SCH 120 SCH 120 SCH 120

A-333 GR 6 SCH 100 SCH 100 SCH 100 SCH 100

4" SCH 160 SMLS 24" SCH 80 SCH 80 SCH 80 SCH 80 PLUG6" - 10" SCH 120 SMLS OLETS, BRANCH OUTLETS SIZE DESCRIPTION

12" - 14" SCH 100 SMLS FORGED MSS-SP-97


A-671 GR CC65 CL22 S2 WELDOLET ASTM A-105 TO MATCH PIPE

SCH 100 EFW (E=1.0) WELDOLET ASTM A-350 Gr LF2 TO MATCH PIPE

(100% RADIOGRAPHY)

24" SCH 80 EFW (E=1.0)

(100% RADIOGRAPHY)

MECHANICAL JOINTSSIZE DESCRIPTION BOLTS & GASKETS SIZE DESCRIPTION

FLANGES PER ASME B16.5 ASTM A-105 STUD BOLTS - ASTM A-193 GR B7 1/2" - 3" 600 CLASS RF TL = 250 °F


600 RF WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H 1/2" - 3"


GASKET - SPIRAL WOUND WITH 316 SS 4" - 24" 600 CLASS RF TL = 250 °F

600 RF BLIND FLANGE

CS BLACK EPOXY COATED CENTERING RING - 0.125" THICK 4" - 24"

FLANGES PER ASME B16.5 ASTM A-350 Gr LF2

600 RF WN FLANGE MISCELLANEOUS ITEMS GLOBE(BORE TO MATCH PIPE) SIZE DESCRIPTION SIZE DESCRIPTION

1 1/2" & 600 CLASS RF

600 RF BLIND FLANGE SMLR

2" - 3" 600 CLASS RF

4" - 12" 600 CLASS RF


HEA

DER

SIZ

ES (

INC

HES)

1 & SMLR T SIZE DESCRIPTION

1 1/2 R T 1 1/2" & 600 CLASS RF, PISTON

2 N R T LEGEND SMLR

3 N R R T 2" - 24" 600 CLASS RF, WAFER




10 N N W W W R R T



16 N N W W W W R R R R T OTHER VALVES18 N N W W W W W R R R R T SIZE DESCRIPTION


24 N N W W W W W W R R R R R T 1/2" - 2" 600 CLASS MONOFLANGE DBB

RF X THD

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24


NOTES: 6. ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED PRESS - TEMP RATING

1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: IN ACCORDANCE WITH NACE MR0175 LATEST ISSUE & TEMPERATURE PRESS. TEMPERATURE

GC, PG, PL, SG, OW, DP SPECIFICATION "MATERIAL REQUIREMENTS FOR SOUR SERVICE " PSIG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION DOCUMENT NO. A-1-GEN-MC-SP-0001 °F MAX.

WITH AGS-8. 7. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED -20 TO 100 1480 -29 TO 38

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED 8. ALL VALVES SHALL BE PROVIDED WITH 6.35 MM (0.25") 200 1350 93

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 CORROSION ALLOWANCE. 300 1315 149

4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 400 1270 204

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 500 1200 260






VALVES (NOTE 8)

1/2" - 1 1/2"

12" - 20"

1/2" - 3"

16" - 20" 4" - 10"

BALL (NOTE 4)

1/2" - 3" 600 CLASS RF TL > 250 °F

1/2" - 3" WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20


4" - 24"

4" - 24"



CLASS STANDARD

600

CARBON STEEL JS2N

GATEDESCRIPTION CODE

PLUGDESCRIPTION CODE

DESCRIPTION CODE

VB-70N

VB-70N-HT

VB-77N

VB-77N-HT

GLOBEDESCRIPTION CODE

VGL-74N

VGL-70N

VGL-76N

CHECKDESCRIPTION CODE

VC-134N

VC-136N

OTHER VALVESDESCRIPTION CODE

VNI-11N

PRESS - TEMP RATING

TEMPERATURE PRESS.

BARG

°C MAX.

-29 TO 38 102.0

93 93.1

149 90.7

204 87.6

260 82.7


BARG - 153

Arthit Field Development

Central Facilities

VALVES (NOTE 8)

BALL (NOTE 4)



CODE -20/300 °F 600

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/149 °C - STNL. STL.



PIPE GATESIZE THICKNESS & MATL. SIZE DESCRIPTION CODE

SIZE ELL TEE RED CAP



8" - 24" SCH 60 SCH 60 SCH 60 SCH 60

A-358 TP316/316L CLASS 1 28" 1.125" 1.125" 1.125" 1.125"

8" - 24" SCH 60 EFW (E=1.0) 30" 1.25" 1.25" 1.25" 1.25"

(100% RADIOGRAPHY)

28" 1.125" THK. EFW (E=1.0)


30" 1.25" THK. EFW (E=1.0)

(100% RADIOGRAPHY) 1/2" - 11/2" NIPOFLANGE FLG CL 600, RF, ASTM A-182 GR F316/316L TO MATCH PIPE

WELDOLET ASTM A-182 GR F316/316L TO MATCH PIPE


STUD BOLTS - ASTM A-193 GR B7

HOT DIP GALVANISED AS PER ASTM A153 1/2" - 3" 600 CLASS RF TL = 250 °F VB-115N


(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 4" - 28" 600 CLASS RF TL = 250 °F VB-117N


1/2" - 24" 600 RF BLIND FLANGE FILLED FLEXITALLIC STYLE CGI OR EQUAL PER ASME B16.20,


FLANGES PER ASME B16.47 SERIES A ASTM A-182-F316/316L RING-0.125" THICK

600 RF WN FLANGE MISCELLANEOUS ITEMS GLOBE(BORE TO MATCH PIPE) SIZE DESCRIPTION SIZE DESCRIPTION CODE

600 RF BLIND FLANGE 1 1/2" & 600 CLASS RF VGL-128N

SMLR

2" - 12" 600 CLASS RF VGL-116N


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T

2 N R T LEGEND 1/2" - 3" 600 CLASS RF, PISTON VC-137N

3 N R R T




10 N N W W W R R T





24 N N W W W W W W R R R R R T 1/2" - 2" 600 CLASS MONOFLANGE DBB VNI-10N


30 N N W W W W W W R R R R R R R T 600 CLASS RF INTEGRAL DBB VBI-4N

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28 30







3. BALL VALVES SHALL BE FIRESAFE CERTIFIED 7. ALL SS MATERIAL SHALL BE DUAL STAMPED TO TYPE SS316/316L, 200 1240 93 85.5

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 SOLUTION ANNEALED, ACID PICKLED AND PASSIVATED. 300 1120 149 77.2

4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB 8. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR

BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR


A-1-PP-PI-SP-0011A2 28.02.05 Re-issued for Approval PKG BV ARI BMK C 23.02.06 Approved for Construction PKG BV ARI MKS SW



J2N

SEAMLESS ASME B16.9 ASTM A-403 WP316/316L

A-312 TP316/316L

1/2" - 10"

BALL (NOTE 4)

FLANGES PER ASME B16.5 ASTM A-182 F316/316L

28" - 30"

28" - 30"


1/2" - 2"


PSIG - 2160 BARG - 149




ASME B31.3 (LOW TEMP) -46/260 °C 3.2 MM LT CARBON STEEL J3S1





1/2" - 11/2" SCH XXS SMLS 1/2" - 11/2" SCH XXS SCH XXS SCH XXS SCH XXS

2" SCH 160 SCH 160 SCH 160 SCH 160


26" 1.188" 1.188" 1.188" 1.188"

3" - 14" SCH 80 SMLS

A-671 GR CC65 CL22 S2

16" - 24" SCH 80 EFW (E=1.0)


26" 1.188" EFW (E=1.0)

(100% RADIOGRAPHY) 1/2" - 11/2" NIPOFLANGE FLG CL 600, RF, ASTM A-350 GR LF2 TO MATCH PIPE

WELDOLET ASTM A-350 GR LF2 TO MATCH PIPE



HOT DIP GALVANISED AS PER ASTM A153 1/2" - 3" VB-70-LT


(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 4" - 24" VB-77-LT




FLANGES PER ASME B16.47 SERIES A ASTM A-350 LF2

26" 600 RF WN FLANGE MISCELLANEOUS ITEMS GLOBE(BORE TO MATCH PIPE) SIZE DESCRIPTION SIZE DESCRIPTION CODE

1 1/2" & 600 CLASS RF VGL-74-LT

26" 600 RF BLIND FLANGE SMLR

2" - 3" 600 CLASS RF VGL-70-LT

4" - 14" 600 CLASS RF VGL-76-LT


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR

3 N R R T 2" - 24" 600 CLASS RF, WAFER VC-135-LT


6 N N W R R T T - EQUAL TEE 18" 600 CLASS RF, NON SLAM CHECK VC-163-LT


10 N N W W W R R T






26 N N W W W W W W R R R R R R T RF x THD DBB TL = 400 °F

600 CLASS RF INTEGRAL DBB VBI-5-LT

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 26



1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 7. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER TEMPERATURE PRESS. TEMPERATURE PRESS.

GC, PG, PL, SG, OW, DP FOR BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION FOR EXPOSED ENDS. °F MAX. °C MAX.

WITH AGS-8. 8 BALL VALVES SHALL BE DESIGNATED "LT" FOR LOW -50 TO 100 1480 -46 TO 38 102.0

3 BALL VALVES SHALL BE FIRESAFE CERTIFIED TEMPERATURE SEALS. 200 1350 93 93.1




6. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED MAX HYDROSTATIC TEST LIMITED BY FLANGES





1/2" - 10"

BALL (NOTE 4)




1/2" - 2"




CODE -20/500 °F 600

ASME B31.3 HYDROCARBONS AND LIQUID VAPOR -29/260 °C - DUPLEX SS




ASTM A-790 DUPLEX SS SIZE ELL TEE RED CAP


SCH 80S SMLS 2" - 6" SCH 40S SCH 40S SCH 40S SCH 40S

8" - 10" SCH 30 SCH 30 SCH 30 SCH 30

2" - 6" SCH 40S SMLS 12" SCH 40S SCH 40S SCH 40S SCH 40S

14" - 24" SCH 40 SCH 40 SCH 40 SCH 40

8" - 10" SCH 30 EFW (E=1.0) 28" .812" .812" .812" .812"

(100% RADIOGRAPHY) 30" .875" .875" .875" .875"

12" SCH 40S EFW (E=1.0) OLETS, BRANCH OUTLETS PLUG(100% RADIOGRAPHY) FORGED MSS-SP-97 SIZE DESCRIPTION CODE

14" - 24" SCH 40 EFW (E=1.0) 1/2" - 11/2" NIPOFLANGE FLG CL 600, RF, ASTM A-182 GR F51 TO MATCH PIPE

(100% RADIOGRAPHY) WELDOLET ASTM A-182 GR F51 TO MATCH PIPE

28" 0.812" EFW (E=1.0)

(100% RADIOGRAPHY)

30" 0.875" EFW (E=1.0)

(100% RADIOGRAPHY)


FLANGES PER ASME B16.5 ASTM A-182-F51 STUD BOLTS - ASTM A -193 GR.B7

DUPLEX SS UNS S31803 HOT DIP GALVANISED AS PER ASTM A153 1/2" - 3" 600 CLASS RF TL = 250 °F VB-103N

HVY. HEX NUTS-ASTM A-194 GR 2H

1/2" - 24" 600 RF WN FLANGE HOT DIP GALVANISED AS PER ASTM A153 4" -30" 600 CLASS RF TL = 250 °F VB-79N




MISCELLANEOUS ITEMS GLOBE28" - 30" 600 RF WN FLANGE SIZE DESCRIPTION SIZE DESCRIPTION CODE


1 1/2" & 600 CLASS RF VGL-129N

28" - 30" 600 RF BLIND FLANGE SMLR

2" - 12" 600 CLASS RF VGL-103N


HEA

DER

SIZ

ES

(IN

CH

ES

)



2 N R T LEGEND SMLR

3 N R R T




10 N N W W W R R T








1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 28 30










5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS EXPOSED ENDS. 500 1150 260 79.3

9 METAL SEATED BALL VALVES SHALL BE TAGGED VB-XXX-M MAX HYDROSTATIC TEST LIMITED BY FLANGES





J4N

1/2" - 1 1/2"

1/2" - 10"

BALL (NOTE 4, 9)







CODE -20/680 °F 0.125 IN 900

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/360 °C 3.2 MM CARBON STEEL FS1

PIPE AND FITTINGS VALVES(SEE NOTE 4)





2" - 3" SCH 160 SCH 160 SCH 160 SCH 160

API 5L GR B PSL1 4" SCH 120 SCH 120 SCH 120 SCH 120

2" - 3" SCH 160 SMLS



18" - 24" SCH 100 SCH 100 SCH 100 SCH 100

A-333 GR 6

6" - 14" SCH 120 SMLS OLETS, BRANCH OUTLETS PLUGFORGED MSS-SP-97 SIZE DESCRIPTION CODE

A-671 GR CC65 CL22 S2

1/2" - 11/2" NIPOFLANGE FLG CL 1500, RTJ, ASTM A-105 TO MATCH PIPE

16" SCH 120 EFW (E=1.0) WELDOLET ASTM A-105 TO MATCH PIPE

(100% RADIOGRAPHY) 6" - 10" WELDOLET ASTM A-350 Gr LF2 TO MATCH PIPE

18" - 24" SCH 100 EFW (E=1.0)

(100% RADIOGRAPHY)


FLANGES PER ASME B16.5 ASTM A-105 STUD BOLTS - ASTM A-193 GR B7 1 1/2" & 1500 CLASS RTJ VB-142-M

1/2" - 2" 1500 RTJ WN FLANGE HOT DIP GALVANISED AS PER ASTM A153 SMLR

(BORE TO MATCH PIPE) HVY. HEX. NUTS - ASTM A-194 GR 2H 2" 1500 CLASS RTJ VB-85-M

3" - 4" 900 RTJ WN FLANGE HOT DIP GALVANISED AS PER ASTM A153 3" - 6" 900 CLASS RTJ VB-80-M

(BORE TO MATCH PIPE) GASKET - OCTAG. RING, TYPE R, SOFT IRON, MAX. BHN 90 8" - 24" 900 CLASS RTJ VB-81-M

1/2" - 2" 1500 RTJ BLIND FLANGE PER ASME B16.20

3" - 4" 900 RTJ BLIND FLANGE

FLANGES PER ASME B16.5 ASTM A-350 Gr LF2

6" - 24" 900 RTJ WN FLANGE MISCELLANEOUS ITEMS GLOBE(BORE TO MATCH PIPE) SIZE DESCRIPTION SIZE DESCRIPTION CODE

6" - 24" 900 RTJ BLIND FLANGE 1/2" - 2" 1500 CLASS RTJ VGL-85

3" - 12" 900 CLASS RTJ VGL-80


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T 1 1/2" & 1500 CLASS RTJ , PISTON VC-155

2 N R T LEGEND SMLR

3 N R R T

4 N N R R T W - WELDOLET(WOL) 2" 1500 CLASS RTJ, WAFER VC-157


8 N N W W R R T R - REDUCING TEE 3" - 24" 900 CLASS RTJ, WAFER VC-141

10 N N W W W R R T





24 N N W W W W W W R R R R R T 1/2" - 2" VNI-13

RTJ x THD

1/2" - 2" VBI-1

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24



1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 6. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE TEMPERATURE PRESS. TEMPERATURE PRESS.

GC, PG, PL, SG, OW, DP PSIG BARG



3 BALL VALVES SHALL BE FIRESAFE CERTIFIED EXPOSED ENDS. 200 2025 93 139.6


4. REFER ITEM 4.5.15 OF PIPING MATERIALS DOCUMENT AGS-8 400/500 1900/1795 204/260 131.0/123.8

REGARDING EXPLOSIVE DECOMPRESSION FAILURE OF SEALS. 600/680 1640/1604 316/360 113/110.6

5. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB MAX HYDROSTATIC TEST LIMITED BY FLANGES





1/2" - 4"

BALL (NOTE 5)


1500 CLASS MONOFLANGE DBB

1500 CLASS RTJ INTEGRAL DBB

ROUGHNESS OF 63µ INCH.



CODE -20/500 °F 0.25 IN 900

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -29/260 °C 6.35 MM CARBON STEEL FS2N

PIPE AND FITTINGS VALVES(SEE NOTE 4 & 9)






API 5L GR B PSL1

2" SCH XXS SMLS SEAMLESS ASME B16.9 ASTM A-420 WPL6

3" - 4" SCH XXS SCH XXS SCH XXS SCH XXS

A-333 GR 6 6" SCH 160 SCH 160 SCH 160 SCH 160

3" - 4" SCH XXS SMLS 8" - 14" SCH 140 SCH 140 SCH 140 SCH 140

16" - 24" SCH 120 SCH 120 SCH 120 SCH 120

6" SCH 160 SMLS OLETS, BRANCH OUTLETS PLUGFORGED MSS-SP-97 SIZE DESCRIPTION CODE

8" - 14" SCH 140 SMLS



16" - 24" SCH 120 EFW (E=1.0) 3" - 10" WELDOLET ASTM A-350 Gr LF2 TO MATCH PIPE

(100% RADIOGRAPHY)


FLANGES PER ASME B16.5 ASTM A-105 STUD BOLTS - ASTM A-193 GR B7 1 1/2" & 1500 CLASS RTJ TL = 250 °F

1/2" - 2" 1500 RTJ WN FLANGE HOT DIP GALVANISED AS PER ASTM A153 SMLR

(BORE TO MATCH PIPE) HVY. HEX. NUTS - ASTM A-194 GR 2H 2" 1500 CLASS RTJ TL = 250 °F

HOT DIP GALVANISED AS PER ASTM A153 3" - 24" 900 CLASS RTJ TL = 250 °F

1/2" - 2" 1500 RTJ BLIND FLANGE GASKET - OCTAG. RING, TYPE R, SOFT IRON, MAX. BHN 90 1 1/2" & VB-147N-HT-ED

PER ASME B16.20 SMLR

FLANGES PER ASME B16.5 ASTM A-350 Gr LF2 2" VB-148N-HT-ED

3" - 24" 900 RTJ WN FLANGE 3" - 24" VB-149N-HT-ED


MISCELLANEOUS ITEMS GLOBE3" - 24" 900 RTJ BLIND FLANGE SIZE DESCRIPTION SIZE DESCRIPTION CODE

1/2" - 2" 1500 CLASS RTJ VGL-132N

3" - 12" 900 CLASS RTJ VGL-133N


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T 1 1/2" & 1500 CLASS RTJ, PISTON VC-149N

2 N R T LEGEND SMLR

3 N R R T

4 N N R R T W - WELDOLET(WOL) 2" 1500 CLASS RTJ, WAFER VC-150N


8 N N W W R R T R - REDUCING TEE 3" - 24" 900 CLASS RTJ, WAFER VC-151N

10 N N W W W R R T






RTJ X THD

1/2" - 2" 1500 CLASS RTJ INTEGRAL DBB VBI-6N

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24


NOTES: 6. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB PRESS - TEMP RATING


PG IN ACCORDANCE WITH NACE MR0175 LATEST ISSUE & PSIG BARG



3 BALL VALVES SHALL BE FIRESAFE CERTIFIED 8. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED 200 2025 93 139.6

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 9. ALL VALVES SHALL BE PROVIDED WITH 6.35 MM (0.25") 300 1970 149 135.8

4. REFER ITEM 4.5.15 OF PIPING MATERIALS DOCUMENT AGS-8 CORROSION ALLOWANCE. 400 1900 204 131.0

REGARDING EXPLOSIVE DECOMPRESSION FAILURE OF SEALS. 10. BOLT SIZES 11/8"DIA & LARGER TO BE ONE BOLT DIA LONGER FOR BOLT 500 1795 260 123.8

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE TENSIONING DEVICE,C/W PLASTIC END PROTECTOR FOR EXPOSED ENDS. MAX HYDROSTATIC TEST LIMITED BY FLANGES





A-671 GR CC65 CL22 S2 1/2" - 2"

BALL (NOTE 6)

VB-147N-ED

VB-148N-ED

VB-149N-ED

1500 CLASS RTJ TL > 250 °F






1 Jul-04 RANGE ALLOW.

CODE -20/300 °F 900

ASME B31.3 -29/149 °C - STNL. STL.




A-312 TP 316/316L SIZE ELL TEE RED CAP

1/2" - 11/2" SCH 80S SCH 80S SCH 80S SCH 80S

1/2" - 1 1/2" SCH 80S SMLS 2" - 3" SCH 40S SCH 40S SCH 40S SCH 40S




A-358 TP316/316L CLASS 1


1/2" - 11/2" NIPOFLANGE FLG CL 1500, RTJ, ASTM A-182 GR F316/316L TO MATCH PIPE



FLANGES PER ASME B16.5 ASTM A-182 F316/316L STUD BOLTS - ASTM A-193 GR B7 1 1/2" & 1500 CLASS RTJ TL = 250 °F VB-141N-ED


1/2" - 2" 1500 RTJ WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H 1 1/2" & VB-141N-HT-ED

(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 SMLR

3" - 24" 900 RTJ WN FLANGE GASKET - OCTAGONAL RING, TYPE R, MAX BHN 135 2" 1500 CLASS RTJ TL = 250 °F VB-140N-ED

(BORE TO MATCH PIPE) ASTM A182 GR F316 AS PER ASME B16.20 2" VB-140N-HT-ED

1/2" - 2" 1500 RTJ BLIND FLANGE 3" - 24" 900 CLASS RTJ TL = 250 °F VB-139N-ED



1/2" - 2" 1500 CLASS RTJ VGL-131N

3" - 12" 900 CLASS RTJ VGL-130N


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T 1 1/2" & 1500 CLASS RTJ , PISTON VC-144N

2 N R T LEGEND SMLR

3 N R R T 2" 1500 CLASS RTJ, WAFER VC-143N


6 N N W R R T T - EQUAL TEE 3" - 24" 900 CLASS RTJ, WAFER VC-142N


10 N N W W W R R T 18" 900 CLASS RTJ, NON SLAM CHECK VC-147N






RTJ x THD


1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24


NOTES: IN ACCORDANCE WITH NACE MR0175 LATEST ISSUE & PRESS - TEMP RATING (NOTE 11)

1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: SPECIFICATION "MATERIAL REQUIREMENTS FOR SOUR SERVICE " TEMPERATURE PRESS. TEMPERATURE PRESS.

GC, PG, PL, SG, OW, DP DOCUMENT NO. A-1-GEN-MC-SP-0001 PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION WITH AGS-8. 8. ALL SS MATERIAL SHALL BE DUAL STAMPED TO TYPE SS316/316L, °F MAX. °C MAX.

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED SOLUTION ANNEALED, ACID PICKLED AND PASSIVATED. -20 TO 100 2160 -29 TO 38 148.9

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 9. REFER ITEM 4.5.15 OF PIPING MATERIALS DOCUMENT AGS-8 200 1860 93 128.2

4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB REGARDING EXPLOSIVE DECOMPRESSION FAILURE OF SEALS. 300 1680 149 115.8

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE 10. BOLT SIZES 11/8"DIA & LARGER TO BE ONE BOLT DIA LONGER FOR BOLT 356 1602 180 110

TENSIONING DEVICE,C/W PLASTIC END PROTECTOR FOR EXPOSED ENDS.

6. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED 11. MAX HYDROSTATIC TEST LIMITED BY FLANGES

7. ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED A-1-PP-PI-SP-0011 PSIG - 3240 BARG - 224




SERVICE

HYDROCARBONS LIQUID AND VAPOR (NOTE 11) F2N

BALL (NOTE 4)





SEAL GAS LINE FOR TURBO EXPANDER IS DESIGNED FOR -46 TO 380C.




ASME B31.3 (LOW TEMP) -46/260 °C 3.2 MM LT CARBON STEEL F3S1

PIPE AND FITTINGSVALVES

(SEE NOTE 7)





2" - 3" SCH 160 SCH 160 SCH 160 SCH 160


18" - 24" SCH 100 SCH 100 SCH 100 SCH 100

4" - 14" SCH 120 SMLS

A-671 GR CC65 CL22 S2

16" SCH 120 EFW (E=1.0)


18" - 24" SCH 100 EFW (E=1.0)

(100% RADIOGRAPHY) 1/2" - 11/2" NIPOFLANGE FLG CL 1500, RTJ, ASTM A-350 GR LF2 TO MATCH PIPE



FLANGES PER ASME B16.5 ASTM A-350 LF2 STUD BOLTS - ASTM A-320 GR L7 1 1/2" & 1500 CLASS RTJ TL = 400 °F


1/2" - 2" 1500 RTJ WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 4 S3 2" 1500 CLASS RTJ TL = 400 °F


GASKET - OCTAG. RING, TYPE R, SOFT IRON, MAX. BHN 90 3" - 6" 900 CLASS RTJ TL = 400 °F

3" - 24" 900 RTJ WN FLANGE PER ASME B16.20

(BORE TO MATCH PIPE) 8" - 24"

1/2" - 2" 1500 RTJ BLIND FLANGE

MISCELLANEOUS ITEMS GLOBE3" - 24" 900 RTJ BLIND FLANGE SIZE DESCRIPTION SIZE DESCRIPTION CODE

1/2" - 2" 1500 CLASS RTJ VGL-85-LT

3" - 12" 900 CLASS RTJ VGL-80-LT


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T

2 N R T LEGEND 1 1/2" & 1500 CLASS RTJ , PISTON VC-145-LT

3 N R R T SMLR

4 N N R R T W - WELDOLET(WOL) 2" 1500 CLASS RTJ, WAFER VC-146-LT


8 N N W W R R T R - REDUCING TEE 3" - 24" 900 CLASS RTJ, WAFER VC-141-LT

10 N N W W W R R T






RTJ x THD

1/2" - 2" 1500 CLASS RTJ INTEGRAL DBB VBI-3-LT

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24




GC, PG, PL, SG, OW, DP 6. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE PSIG BARG


WITH AGS-8. 7. REFER ITEM 4.5.15 OF PIPING MATERIALS DOCUMENT AGS-8 -50 TO 100 2220 -46 TO 38 153.1

3 BALL VALVES SHALL BE FIRESAFE CERTIFIED REGARDING EXPLOSIVE DECOMPRESSION FAILURE OF SEALS. 200 2025 93 139.6


4 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 400 1900 204 131.0

FOLLOWING CRITERIA SHALL APPLY: BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 500 1795 260 123.8

- BALL VALVES SHALL BE DESIGNATED "LT" FOR LOW EXPOSED ENDS.

TEMPERATURE SEALS. MAX HYDROSTATIC TEST LIMITED BY FLANGES





1/2" - 10"

BALL (NOTE 5)

VB-142-LT-ED

VB-85-LT-ED

VB-80-LT-ED

900 CLASS RTJ TL = 400 °F VB-81-LT-ED



WHEN VALVES ARE OPERATING BELOW -290C THE



CODE -20/608 °F 900

ASME B31.3 HYDROCARBONS AND LIQUID VAPOR -29/320 °C - DUPLEX SS F4N




ASTM A-790 DUPLEX SS SIZE ELL TEE RED CAP

UNS S31803 1/2" - 3/4" SCH 160 SCH 160 SCH 160 SCH 160

1/2" - 3/4" SCH 160 SMLS 1" - 11/2" SCH 80S SCH 80S SCH 80S SCH 80S


1" - 11/2" SCH 80S SMLS 8" - 14" SCH 60 SCH 60 SCH 60 SCH 60

16" - 24" SCH 80 SCH 80 SCH 80 SCH 80


8" - 14" SCH 60 EFW (E=1.0)


16" - 24" SCH 80 EFW (E=1.0)

(100% RADIOGRAPHY) 1/2" - 11/2" NIPOFLANGE FLG CL 1500, RTJ, ASTM A-182 GR F51 TO MATCH PIPE



FLANGES PER ASME B16.5 ASTM A-182-F51 STUD BOLTS - ASTM A -193 GR.B7 1 1/2" & 1500 CLASS RTJ VB-150N-M

DUPLEX SS UNS S31803 HOT DIP GALVANISED AS PER ASTM A153 SMLR

HVY. HEX NUTS-ASTM A-194 GR 2H 2" 1500 CLASS RTJ VB-151N-M

1/2" - 2" 1500 RTJ WN FLANGE HOT DIP GALVANISED AS PER ASTM A153

(BORE TO MATCH PIPE) GASKET - OCTAGONAL RING, TYPE R, MAX BHN 150 3" - 24" 900 CLASS RTJ VB-152N-M

INCONEL 625 AS PER ASME B16.20

3" - 24" 900 RTJ WN FLANGE


1/2" - 2" 1500 RTJ BLIND FLANGE MISCELLANEOUS ITEMS GLOBESIZE DESCRIPTION SIZE DESCRIPTION CODE


1/2" - 2" 1500 CLASS RTJ VGL-134N

3" - 12" 900 CLASS RTJ VGL-135N


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T 1 1/2" & 1500 CLASS RTJ, PISTON VC-152N

2 N R T LEGEND SMLR

3 N R R T

4 N N R R T W - WELDOLET(WOL) 2" 1500 CLASS RTJ, WAFER VC-153N


8 N N W W R R T R - REDUCING TEE 3" - 24" 900 CLASS RTJ, WAFER VC-154N

10 N N W W W R R T






RTJ X THD


1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24










5. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE EXPOSED ENDS. 500/608 1730/1667 260/320 119.3/114.9






BALL (NOTE 4)





CODE -148/329 °F 1500

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -100/165 °C - STNL. STL. G2L





1/2" - 11/2" SCH 160 SCH 160 SCH 160 SCH 160

1/2" - 1 1/2" SCH 160 SMLS 2" - 6" SCH 160 SCH 160 SCH 160 SCH 160



A-358 TP316/316L CLASS 1

8" SCH XXS EFW (E=1.0)


10" SCH 160 EFW (E=1.0)

(100% RADIOGRAPHY) 1/2" - 1" NIPOFLANGE FLG CL 1500, RTJ, ASTM A-182 GR F316/316L TO MATCH PIPE



FLANGES PER ASME B16.5 ASTM A-182 F316/316L STUD BOLTS - ASTM A-320 GR L7 1 1/2" & VB-153-LT-ED


1/2" - 10" 1500 RTJ WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 4 S3

(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 2" - 10" VB-154-LT-ED

GASKET - OCTAGONAL RING, TYPE R, MAX BHN 135

1/2" - 10" 1500 RTJ BLIND FLANGE ASTM A182 GR F316 AS PER ASME B16.20


1/2" - 2" 1500 CLASS RTJ VGL-138-LT

3" - 10" 1500 CLASS RTJ VGL-139-LT


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T

2 N R T LEGEND 2" - 10" 1500 CLASS RTJ, WAFER VC-156-LT

3 N R R T




10 N N W W W R R T


1 & SMLR 1 1/2 2 3 4 6 8 10




RV SOLUTION ANNEALED, ACID PICKLED AND PASSIVATED. PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 7. REFER ITEM 4.5.15 OF PIPING MATERIALS DOCUMENT AGS-8 °F MAX. °C MAX.

WITH AGS-8. REGARDING EXPLOSIVE DECOMPRESSION FAILURE OF SEALS. -148 TO 100 3600 -100 TO 38 248.2

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED 8. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 200 3095 93 213.4


4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB EXPOSED ENDS. 329 2730 165 188

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE 9. REQUIRES CERTIFICATE OF COMPLIANCE WITH LOW TEMP. LIMITS ON

AUSTENITIC STNL. STL AS PER ASME B31.3 PARA 323.2.2 AND 323.3. MAX HYDROSTATIC TEST LIMITED BY FLANGES





BALL (NOTE 4)

1500 CLASS RTJ TL=2500F





1 Feb-06 SERVICE RANGE ALLOW.

CODE -50/356 °F 1500

ASME B31.3 HYDROCARBONS LIQUID AND VAPOR -46/180 °C - STNL. STL. G2N





1/2" - 11/2" SCH 160 SCH 160 SCH 160 SCH 160

1/2" - 1 1/2" SCH 160 SMLS 2" - 4" SCH 80S SCH 80S SCH 80S SCH 80S

6" - 10" SCH 120 SCH 120 SCH 120 SCH 120


6" SCH 120 SMLS

A-358 TP316/316L CLASS 1

OLETS, BRANCH OUTLETS PLUG8" - 10" SCH 120 EFW (E=1.0) FORGED MSS-SP-97 SIZE DESCRIPTION CODE

(100% RADIOGRAPHY)

1/2" - 1" NIPOFLANGE FLG CL 1500, RTJ, ASTM A-182 GR F316/316L TO MATCH PIPE



FLANGES PER ASME B16.5 ASTM A-182 F316/316L STUD BOLTS - ASTM A-320 GR L7 1 1/2" & VB-153N-LT-ED


1/2" - 10" 1500 RTJ WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 4 S3

(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 2" - 10" VB-154N-LT-ED

GASKET - OCTAGONAL RING, TYPE R, MAX BHN 135

1/2" - 10" 1500 RTJ BLIND FLANGE ASTM A182 GR F316 AS PER ASME B16.20


1/2" - 2" 1500 CLASS RTJ VGL-138N-LT

3" - 10" 1500 CLASS RTJ VGL-139N-LT


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T

2 N R T LEGEND 1 1/2" & 1500 CLASS RTJ , PISTON VC-155N-LT

3 N R R T SMLR


6 N N W R R T T - EQUAL TEE 2" - 10" 1500 CLASS RTJ, WAFER VC-156N-LT


10 N N W W W R R T


1/2" - 2" 1500 CLASS MONOFLANGE DBB VNI-19N-LT

RTJ x THD

1/2" - 2" 1500 CLASS RTJ INTEGRAL DBB VBI-8N-LT

1 & SMLR 1 1/2 2 3 4 6 8 10


NOTES: 7. REFER ITEM 4.5.15 OF PIPING MATERIALS DOCUMENT AGS-8 PRESS - TEMP RATING

1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: RV REGARDING EXPLOSIVE DECOMPRESSION FAILURE OF SEALS. TEMPERATURE PRESS. TEMPERATURE PRESS.

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 8. BALL VALVES SHALL BE DESIGNATED "LT" FOR LOW TEMP. SEALS. PSIG BARG

WITH AGS-8. 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR °F MAX. °C MAX.

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR -50 TO 100 2538 -46 TO 38 175

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 EXPOSED ENDS. 200 2538 93 175

4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB 10 ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED 300 2538 149 175

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE IN ACCORDANCE WITH NACE MR0175 LATEST ISSUE & 356 2538 180 175

SPECIFICATION "MATERIAL REQUIREMENTS FOR SOUR SERVICE "

6. ALL SS MATERIAL SHALL BE DUAL STAMPED TO TYPE SS316/316L, DOCUMENT NO. A-1-GEN-MC-SP-0001 MAX HYDROSTATIC TEST LIMITED BY FLANGES

SOLUTION ANNEALED, ACID PICKLED AND PASSIVATED. A-1-PP-PI-SP-0011 PSIG - 3807 BARG - 263

C 23.02.06 Approved for Construction PKG BV ARI MKS SW Arthit Field Development


BALL (NOTE 4)














2" - 6" SCH 160 SCH 160 SCH 160 SCH 160


24" SCH 120 SCH 120 SCH 120 SCH 120

8" - 14" SCH 140 SMLS 36" 2.625" THK. 2.625" THK. 2.625" THK. 2.625" THK.

A-671 GR CC65 CL22 S2

16" - 20" SCH 140 EFW (E=1.0)


24" SCH 120 EFW (E=1.0)

(100% RADIOGRAPHY) 1/2" - 11/2" NIPOFLANGE FLG CL 1500, RTJ, ASTM A-350 GR LF2 TO MATCH PIPE


36" 2.625" THK. EFW (E=1.0)

(100% RADIOGRAPHY)


FLANGES PER ASME B16.5 ASTM A-350 LF2 STUD BOLTS - ASTM A-320 GR L7 1 1/2" & 1500 CLASS RTJ TL = 400 °F


1/2" - 24" 1500 RTJ WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 4 S3 2" - 24" 1500 CLASS RTJ TL = 400 °F


GASKET - OCTAG. RING, TYPE R, SOFT IRON, 36" 1500 CLASS WELDED TL = 400 °F VB-156-LT-ED

1/2" - 24" 1500 RTJ BLIND FLANGE MAX. BHN 90 PER ASME B16.20

2" - 24" 1500 CLASS WELDED x RTJ TL = 400 °F VB-158-LT-ED

SPECIAL FLANGES MANUFACTURER STD, ASTM A-350 LF2

36" 1500 RTJ SPECIAL FLANGE MISCELLANEOUS ITEMS GLOBE(BORE TO MATCH PIPE) SIZE DESCRIPTION SIZE DESCRIPTION CODE

1/2" - 2" 1500 CLASS RTJ VGL-85-LT

3" - 12" 1500 CLASS RTJ VGL-86-LT


HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T

2 N R T LEGEND 1 1/2" & 1500 CLASS RTJ , PISTON VC-145-LT

3 N R R T SMLR

4 N N R R T W - WELDOLET(WOL) 2" - 24" 1500 CLASS RTJ, WAFER VC-146-LT


8 N N W W R R T R - REDUCING TEE 12" 1500 CLASS RTJ, NON SLAM CHECK VC-148-LT

10 N N W W W R R T






36 N N W W W W W W W W R R R R T RTJ x THD

1/2" - 2" 1500 CLASS RTJ INTEGRAL DBB VBI-3-LT

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 36


NOTES: 6. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE PRESS - TEMP RATING


GC, PG, PL, SG, OW, DP 7. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 8. REFER ITEM 4.5.15 OF PIPING MATERIALS DOCUMENT AGS-8 °F MAX. °C MAX.

WITH AGS-8. REGARDING EXPLOSIVE DECOMPRESSION FAILURE OF SEALS. -50 TO 100 2538 -46 TO 38 175

3 BALL VALVES SHALL BE FIRESAFE CERTIFIED 9. THIS MATERIAL CLASS HAS BEEN DESIGNED FOR 175 BARG 200 2538 93 175

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 PRESSURE (MAX). 300 2538 149 175

4 BALL VALVES SHALL BE DESIGNATED "LT" FOR LOW 10. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 400 2538 204 175

TEMPERATURE SEALS. BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 500 2538 260 175

5. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB EXPOSED ENDS. MAX HYDROSTATIC TEST LIMITED BY FLANGES





G3S1 (NOTE 9)

1/2" - 14"

(IMPACT TEST AT -460C)

BALL (NOTE 5)

VB-142-LT-ED

VB-85-LT-ED












2" - 6" SCH 160 SCH 160 SCH 160 SCH 160


24" SCH 120 SCH 120 SCH 120 SCH 120

8" - 14" SCH 140 SMLS 36" 2.625" THK. 2.625" THK. 2.625" THK. 2.625" THK.

A-671 GR CC65 CL22 S2

16" - 20" SCH 140 EFW (E=1.0)


24" SCH 120 EFW (E=1.0) 1/2" - 11/2" NIPOFLANGE FLG CL 1500, RTJ, ASTM A-350 GR LF2 TO MATCH PIPE

(100% RADIOGRAPHY) 1/2" - 14" WELDOLET ASTM A-350 GR LF2 TO MATCH PIPE

36" 2.625" THK. EFW (E=1.0)

(100% RADIOGRAPHY)


FLANGES PER ASME B16.5 ASTM A-350 LF2 STUD BOLTS - ASTM A-320 GR L7M 1 1/2" & 1500 CLASS RTJ TL = 400 °F VB-142N-LT-ED

PTFE COATED SMLR

1/2" - 24" 1500 RTJ WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 7M S3 2" - 24" 1500 CLASS RTJ TL = 400 °F VB-85N-LT-ED

(BORE TO MATCH PIPE) PTFE COATED

GASKET - OCTAG. RING, TYPE R, SOFT IRON, 36" 1500 CLASS WELDED TL = 400 °F VB-156N-LT-ED


2" - 24" 1500 CLASS WELDEDXRTJ TL = 400 °F VB-158N-LT-ED

SPECIAL FLANGES MANUFACTURER STD, ASTM A-350 LF2

36" 1500 RTJ SPECIAL FLANGE MISCELLANEOUS ITEMS GLOBE(BORE TO MATCH PIPE) SIZE DESCRIPTION SIZE DESCRIPTION CODE

1/2" - 2" 1500 CLASS RTJ VGL-85N-LT

3" - 12" 1500 CLASS RTJ VGL-86N-LT


HE

AD

ER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T

2 N R T LEGEND 1 1/2" & 1500 CLASS RTJ , PISTON VC-145N-LT

3 N R R T N - WELDOLET(WOL) OR NIPOFLANGE(NOF) SMLR

4 N N R R T W - WELDOLET(WOL) 2" - 24" 1500 CLASS RTJ, WAFER VC-146N-LT


8 N N W W R R T R - REDUCING TEE 36" 1500 CLASS BW, WAFER VC-162N-LT

10 N N W W W R R T

12 N N W W W R R R T 2" - 24" 1500 CLASS RTJ, NON SLAM CHECK VC-148N-LT




24 N N W W W W W W R R R R R T 1/2" - 2" 1500 CLASS MONOFLANGE DBB VNI-14N-LT

36 N N W W W W W W W W R R R R T RTJ x THD

1/2" - 2" 1500 CLASS RTJ INTEGRAL DBB VBI-3N-LT

1 & SMLR 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 36


NOTES: 7. T.L. TEMPERATURE LIMIT SHALL NOT BE EXCEEDED PRESS - TEMP RATING

1. THIS STANDARD IS FOR THE FOLLOWING SERVICES: 8. REFER ITEM 4.5.15 OF PIPING MATERIALS DOCUMENT AGS-8 TEMPERATURE PRESS. TEMPERATURE PRESS.

GC, PG, PL, SG, OW, DP REGARDING EXPLOSIVE DECOMPRESSION FAILURE OF SEALS. PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 9. THIS MATERIAL CLASS HAS BEEN DESIGNED FOR 175 BARG °F MAX. °C MAX.

WITH AGS-8. PRESSURE (MAX). -50 TO 100 2538 -46 TO 38 175

3 BALL VALVES SHALL BE FIRESAFE CERTIFIED 10. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 200 2538 93 175

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 300 2538 149 175

4 BALL VALVES SHALL BE DESIGNATED "LT" FOR LOW EXPOSED ENDS. 400 2538 204 175

TEMPERATURE SEALS. 11. ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED 500 2538 260 175

5. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB IN ACCORDANCE WITH NACE MR0175 LATEST ISSUE &

6. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE SPECIFICATION "MATERIAL REQUIREMENTS FOR SOUR SERVICE "

DOCUMENT NO. A-1-GEN-MC-SP-0001 MAX HYDROSTATIC TEST LIMITED BY FLANGES





G3S1N (NOTE 9)

(IMPACT TEST AT -460C)

BALL (NOTE 5)




CODE -20/680 °F 0.063 IN 1500

ASME B31.3 HEAT MEDIUM -29/360 °C 1.6 MM. CARBON STEEL G5






2" - 6" SCH 80 SCH 80 SCH 80 SCH 80

API 5L GR B PSL1

2" - 6" SCH 80 SMLS

A-333 GR 6 SEAMLESS ASME B16.9 ASTM A-420 WPL6






FLANGES PER ASME B16.5 ASTM A-105 STUD BOLTS - ASTM A-193 GR B7 1 1/2" & 1500 CLASS RTJ VB-159-M


1/2" - 6" 1500 RTJ WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H 2" - 10" 1500 CLASS RTJ VB-160-M


GASKET - OCTAG. RING, TYPE R, SOFT IRON,


FLANGES PER ASME B16.5 ASTM A-350 LF2

8" - 10" 1500 RTJ WN FLANGE MISCELLANEOUS ITEMS GLOBE(BORE TO MATCH PIPE) SIZE DESCRIPTION SIZE DESCRIPTION CODE



HEA

DER

SIZ

ES

(IN

CH

ES

)


1 1/2 R T

2 N R T LEGEND

3 N R R T




10 N N W W W R R T


1 & SMLR 1 1/2 2 3 4 6 8 10




HS, HR FOR THIS SERVICE PSIG BARG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 7. THIS MATERIAL CLASS HAS BEEN DESIGNED FOR 135 BARG °F MAX. °C MAX.

WITH AGS-8. PRESSURE (MAX). -20 TO 100 1950 -29 TO 38 135

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED 8. BOLTS FOR ALL SIZES TO BE ONE BOLT DIA LONGER FOR 200 1950 93 135

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR 300 1950 149 135

4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB EXPOSED ENDS. 400/500 1950 204/260 135

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE 600/680 1950 315/360 135






1/2" - 4"

BALL (NOTE 4)




1 1-Jul-04 SERVICE RANGE ALLOW.

CODE -20 TO 248 °F 0.39 IN 600

ASME B31.8 HYDROCARBONS LIQUID AND VAPOR -29 TO 120 °C 10 MM CARBON STEEL


PIPE SEAMLESS ASME B16.9/MSS-SP-75 ASTM A-860 WPHY 65 GATESIZE THICKNESS & MATL. SIZE DESCRIPTION

API 5L X-65 PSL2 SIZE ELL TEE RED CAP

1" - 3" SCH XXS SMLS 1" - 3" SCH XXS SCH XXS SCH XXS SCH XXS

4" SCH 160 SMLS 4" SCH 160 SCH 160 SCH 160 SCH 160



16" 0.812" SMLS 16" 0.812" 0.812" 0.812" 0.812"

OLETS, BRANCH OUTLETS PLUGFORGED MSS-SP-97 SIZE DESCRIPTION

1" - 11/2" NIPOFLANGE FLG CL 600, RF, ASTM A-694 GR F65 TO MATCH PIPE

WELDOLET ASTM A-694 GR F65 TO MATCH PIPE

MECHANICAL JOINTSSIZE DESCRIPTION BOLTS & GASKETS SIZE DESCRIPTION

FLANGES PER ASME B16.5 A-694 GR F65 STUD BOLTS - ASTM A-193 GR B7 1 1/2" & 600 CLASS RF


1" - 16" 600 RF WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H

(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 2" - 16" 600 CLASS RF


1" - 16" 600 RF BLIND FLANGE WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20


MISCELLANEOUS ITEMS GLOBESIZE DESCRIPTION SIZE DESCRIPTION


HE

AD

ER

SIZ

ES

(IN

CH

ES)

1 T SIZE DESCRIPTION

1 1/2 R T

2 R R T LEGEND





10 N N W W W R R T



16 N N W W W W R R R R T OTHER VALVES SIZE DESCRIPTION

1 1 1/2 2 3 4 6 8 10 12 14 16


NOTES: 6. 3D BEND SHALL BE USED IN THE PIGGING PIPELINE PRESS - TEMP RATING

1. THIS STANDARD IS FOR THE FOLLOWING SERVICE: 7. TEMPERATURE PRESS. TEMPERATURE

GC PRESSURE (MAX). DES. PSIG DES.

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION 8. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR °F DES. °C

WITH AGS-8. BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR -20 TO 248 1117 -29 TO 120

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED EXPOSED ENDS.

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 9. ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED

4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB IN ACCORDANCE WITH NACE MR0175 LATEST ISSUE &

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS SPECIFICATION "MATERIAL REQUIREMENTS FOR SOUR SERVICE "

DOCUMENT NO. A-1-GEN-MC-SP-0001 MAX HYDROSTATIC TEST LIMITED BY FLANGES





PL1 (NOTE 7)

BUTT - WELDING FITTINGS (NOTE 6)

1" - 6"

BALL (NOTE 4)

THIS MATERIAL CLASS HAS BEEN DESIGNED FOR 77 BARG


STANDARD

VALVES

GATECODE

PLUGCODE

CODE

GLOBECODE

CHECKCODE

OTHER VALVESCODE

PRESS - TEMP RATING

PRESS.

BARG

DES.

77


BARG - 108

PL1 (NOTE 7)

(NOTE 4)

VB-145N-M

VB-146N-M


1 July 04 SERVICE RANGE ALLOW.

CODE 0.116 IN 600

ASME B31.4 HYDROCARBONS LIQUID AND VAPOR 3 MM CARBON STEEL


PIPE SEAMLESS ASME B16.9/MSS-SP-75 ASTM A-860 WPHY 52 GATESIZE THICKNESS & MATL. SIZE DESCRIPTION

API 5L X-52 PSL2 SIZE ELL TEE RED CAP

1" - 11/2" SCH XS SMLS 1" - 11/2" SCH XS SCH XS SCH XS SCH XS

2" - 6" SCH STD SMLS 2" - 6" SCH STD SCH STD SCH STD SCH STD

8" 0.375" SMLS 8" 0.375" 0.375" 0.375" 0.375"

OLETS, BRANCH OUTLETS PLUGFORGED MSS-SP-97 SIZE DESCRIPTION

1" - 11/2" NIPOFLANGE FLG CL 600, RF, ASTM A-694 GR F52 TO MATCH PIPE

WELDOLET ASTM A-694 GR F52 TO MATCH PIPE

MECHANICAL JOINTS BALLSIZE DESCRIPTION BOLTS & GASKETS SIZE DESCRIPTION

FLANGES PER ASME B16.5 A-694 GR F52 STUD BOLTS - ASTM A-193 GR B7 1 1/2" & 600 CLASS RF


1" - 8" 600 RF WN FLANGE HVY. HEX. NUTS - ASTM A-194 GR 2H

(BORE TO MATCH PIPE) HOT DIP GALVANISED AS PER ASTM A153 2" - 8" 600 CLASS RF


1" - 8" 600 RF BLIND FLANGE WINDING & FLEXITE SUPER FILLER OR EQUAL, PER ASME B16.20


MISCELLANEOUS ITEMS GLOBESIZE DESCRIPTION SIZE DESCRIPTION


HEA

DER

SIZ

ES (

INC

HES)


1 1/2 R T

2 R R T LEGEND

3 N R R T




OTHER VALVES SIZE DESCRIPTION

1 1 1/2 2 3 4 6 8


NOTES: PRESS - TEMP RATING (NOTE 7)

1. THIS STANDARD IS FOR THE FOLLOWING SERVICE: 6. 3D BEND SHALL BE USED IN THE PIGGING PIPELINE TEMPERATURE PRESS. TEMPERATURE

GC 7. DES. PSIG

2. THIS PIPING MATERIAL CLASS SHALL BE READ IN CONJUNCTION PRESSURE (MAX). °F DES.

WITH AGS-8. 8. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR 1117

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR

IN ACCORDANCE WITH PARAGRAPH 4.6.1 OF AGS-8 EXPOSED ENDS.

4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH A ROUGHNESS


A-1-PP-PI-SP-0011A2 28.02.05 Re-issued for Approval PKG BV ARI BMK C 23.02.06 Approved for Construction PKG BV ARI MKS SW



-20 TO 176 °F

-29 TO 80 °C

BUTT - WELDING FITTINGS (NOTE 6)

1" - 3"


THIS MATERIAL CLASS HAS BEEN DESIGNED FOR 77 BARG

-20 TO 176 -29 TO 80


PSIG - 1396 BARG - 96

CLASS STANDARD

CARBON STEEL PL2

VALVES



BALLDESCRIPTION CODE

VB-143

VB-144




PRESS - TEMP RATING (NOTE 7)

TEMPERATURE PRESS.

DES. BARG

°C DES.

77



Central Facilities

-29 TO 80

BARG - 96


1 1-Aug-04 SERVICE RANGE ALLOW.

CODE -50 TO 194 °F-

1500

ASME B31.8 HYDROCARBONS LIQUID AND VAPOR (LT) -46 TO 90 °C LT CARBON STEEL


GATESIZE THICKNESS & MATL. SIZE DESCRIPTION

API 5L X-65 PSL2 IMP. TEST SIZE ELL TEE RED CAP

1" - 11/2" SCH 160 SMLS SCH 160 SCH 160 SCH 160 SCH 160

SCH STD SCH STD SCH STD SCH STD


SCH STD SMLS

8" - 24" SCH 60 SMLS 36" 1.312" 1.312" 1.312" 1.312"

42" 1.575" 1.575" 1.575" 1.575"

API 5L X-70 PSL2 IMP. TEST OLETS, BRANCH OUTLETS PLUG36" 1.312" SAW (E=1.0) FORGED MSS-SP-97 SIZE DESCRIPTION

(100% RADIOGRAPHY)

1" - 11/2" NIPOFLANGE

42" WELDOLET ASTM A-694 GR F65 TO MATCH PIPE

(NOTE 11) (100% RADIOGRAPHY)

MECHANICAL JOINTS BALL SIZE DESCRIPTION BOLTS & GASKETS SIZE DESCRIPTION

FLANGES PER ASME B16.5 A-694 GR F65 IMP. TEST (NOTE 8) 1 1/2" & 1500 CLASS RTJ

PTFE COATED SMLR

1" - 24" 1500 RTJ WN FLANGE 2" - 24" 1500 CLASS RTJ

(BORE TO MATCH PIPE) PTFE COATED

GASKET - OCTAG. RING, TYPE R, SOFT IRON, 2" - 24" 1500 CLASS WELDED

1" - 24" 1500 RTJ BLIND FLANGE MAX. BHN 90 PER ASME B16.20

2" - 24" 1500 CLASS WELDED x RTJ

IMP. TEST (NOTE 8, 11)

MISCELLANEOUS ITEMS GLOBE42" 1500 RTJ SPECIAL FLANGE SIZE DESCRIPTION SIZE DESCRIPTION



HEA

DER

SIZ

ES (

INC

HES)


1 1/2 R T

2 R R T LEGEND

3 N R R T




10 N N W W R R R T


14 N N W W W R R R R T

16 N N W W W R R R R R T OTHER VALVES18 N N W W W W R R R R R T SIZE DESCRIPTION

20 N N W W W W R R R R R R T

24 N N W W W W W R R R R R R T 1/2" - 2" 1500 CLASS MONOFLANGE DBB

36 N N W W W W W W W W R R R R T RTJ X THD

42 N N W W W W W W W W R R R R R T

1 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 36 42


NOTES: 8. MATERIAL TO BE IMPACT TESTED FOR USE AT MINUS 46 DEG C. PRESS - TEMP RATING (NOTE 7)

1. THIS STANDARD IS FOR THE FOLLOWING SERVICE: 9. BOLT SIZES 11/8" DIA & LARGER TO BE ONE BOLT DIA LONGER FOR TEMPERATURE PRESS. TEMPERATURE

PG BOLT TENSIONING DEVICE, C/W PLASTIC END PROTECTOR FOR DES. PSIG

2. THIS PIPING MAT. CLASS SHALL BE READ IN CONJUNCTION WITH AGS-8 EXPOSED ENDS. °F DES.

3. BALL VALVES SHALL BE FIRESAFE CERTIFIED 10. ALL METALLIC MATERIALS ARE TO BE SUPPLIED CERTIFIED IN ACCOR. -50 TO 194 2538 -46 TO 90


4. FOR FULL BORE BALL VALVE TAG SHALL BE VB-XXX-FB FOR SOUR SERVICE " DOCU. NO. A-1-GEN-MC-SP-0001

5. FLANGE FACING SHALL BE SMOOTH FINISH WITH GROOVE 11. THE 42" PIPE SHALL BE ID(40.23") CONTROLLED HAVING THK OF 1.575".

12. ID FOR 42" PIPELINE (TOPSIDE) HAVE BEEN KEPT SAME AS PIPELINE

6. ID (SUBSEA) AND RISER ID BASED ON PTT/BECHTEL INFO DTD 02.12.04 MAX HYDROSTATIC TEST LIMITED BY FLANGES

7. THIS MATERIAL CLASS HAS BEEN DESIGNED FOR 175 BARG PRESSURE (MAX) A-1-PP-PI-SP-0011A2 28.02.05 Re-issued for Approval PKG BV ARI BMK C 23.02.06 Approved for Construction PKG BV ARI MKS SW



BUTT - WELDING FITTINGS (NOTE 6, 8 & 11)

PIPE (NOTE 8 & 11) SEAMLESS ASME B16.9/MSS-SP-75 ASTM A-860 WPHY 65

1" - 2"

3" - 6"

3" - 6" WELDED ASME B16.9/MSS-SP-75 ASTM A-860 WPHY 70

FLG CL 1500, RTJ, ASTM A-694 GR F65 TO MATCH PIPE

1.575" SAW (E=1.0) 1" - 10"

STUD BOLTS - ASTM A-320 GR L7M

HVY. HEX. NUTS - ASTM A-194 GR 7M S3

SPECIAL FLANGES MANUFACTURERE STD. A-694 GR F70


WITH NACE MR0175 LATEST ISSUE & SPEC."MATERIAL REQUIREMENTS


4D BEND SHALL BE USED IN THE PIGGING PIPELINE

PSIG - 3554 BARG - 245

CLASS STANDARD

LT CARBON STEEL

VALVES



BALL DESCRIPTION CODE

VB-142N-LT-ED

VB-85N-LT-ED

VB-157N-LT-ED

VB-158N-LT-ED




VNI-18N-LT

PRESS - TEMP RATING (NOTE 7)

TEMPERATURE PRESS.

DES. BARG

°C DES.

-46 TO 90 175



Central Facilities

PL3 (NOTE 10)

BARG - 245

a-1-pp-pi-sp-0011

Documents