acca manual - j joe navarra, owner and manager acca …€¦ · single user license pricing learn...
TRANSCRIPT
Joe Navarra - Owner/ Manager - 848-992-7392 E-MAIL: [email protected]
WEBSITE: hvacrcomfortpro.com
ACCA MANUAL - "J" & "S" TRAINING
ACCA ELITE Software - Rhvac 9, Ductsize, & Drawing Board Program Cost: $899.Single User License Pricing
Learn the Easy Way to do Block Loads or Room x Room Whole House Load Calculations
***Coffee, Donuts & Sandwiches for Lunch***
We offer group training at your office location, please call us for pricing.
New Jersey Clean Energy Rebate Programs COOLAdvantage WARMAdvantage
Manual J & S Training Class, Per Person Training Cost:Ground Shipping $20.00:______, 2nd Day Air $35.00:______, Next Day Air $65.00:_______
$500. Shipping: _____
Company Name: ________________________________________________ Owners Name:____________________________________________________ Address: _______________________________________________________ Town: ______________________________ State: _______ Zip Code: _____ Phone #: _____________________ Cell #: ____________________________ E-Mail Address: _________________________________________________Credit Card #: ____________________________ Exp #: ______ PIN #: _____Name on Credit Card: ______________________________________________
March 12th, 2019 - Please RSVP by 03/08/2019
M1401.3 Equipment and appliance sizing. Heating and cooling equipment and appliances shall be sized in accordance with ACCA Manual S or other approved sizing methodologies based on building loads calculated in accordance with ACCA Manual J or other approved heating and cooling calculation methodologies.Exception: Heating and cooling equipment and appliance sizing shall not be limited to the capacities determined in accordance with Manual S where either of the following conditions applies:
1. The specified equipment or appliance utilizes multistage technology or variable refrigerant flow technology and the loads calculated in accordance with the approved heating and cooling calculation methodology are within the range of the manufacturer’s published capacities for that equipment or appliance.2. The specified equipment or appliance manufacturer’s published capacities cannot satisfy both the total and sensible heat gains calculated in accordance with the approved heating and cooling calculation methodology and the next larger standard size unit is specified.M1601.1 Duct design. Duct systems serving heating, cooling and ventilation equipment shall be installed in accordance with the provisions of this section and ACCA Manual D, the appliance manufacturer’s installation instructions or other approved methods.
NOTE: Ask your Wholesalers & Equipment Manufactures to use your CO-OP Funds/ Money to Pay for the Elite Software Programs & the Training Classes.
Total Billed to your Credit Card: Total: _____
As Per Code - 2015 IRC - International Residential Code - Mandatory
As Per Code - 2015 IECC - International Energy Conservation Code - MandatoryR403.7 Equipment sizing and efficiency rating (Mandatory). Heating and cooling equipment shall be sized in accordance with ACCA Manual S based on building loads calculated in accordance with ACCA Manual J or other approved heating and cooling calculation methodologies. New or replacement heating and cooling equipment shall have an efficiency rating equal to or greater than the minimum required by federal law for the geographic location where the equipment is installed.
• Cost for Training Class $500 Per Person• This Includes 5 Hours of Phone Support after Class• Location: American Legion - Post 129
2025 Church Road, Toms River, New Jersey 08753Training Starts: 8:00 am, Ends: At 3:00 pm
• What you need to bring to the Class:Windows Lap-Top w/ CD w/ Mouse & Mouse Pad, w/WiFi Able,Note Book & Pen, Elite Software, will run on Apple Computerswith a Apple Windows Emulator, called Fusion by VM WARE.***Non-Refundable For No Shows***Maximum 20 People***
Joe Navarra - Owner/ Manager - 848-992-7392 E-MAIL: [email protected]
WEBSITE: hvacrcomfortpro.com
ACCA MANUAL - "J" & "S" TRAINING
ACCA ELITE Software - Rhvac 9, Ductsize, & Drawing Board Program Cost: $899.Single User License Pricing
Learn the Easy Way to do Block Loads or Room x Room Whole House Load Calculations
***Coffee, Donuts & Sandwiches for Lunch***
We offer group training at your office location, please call us for pricing.
New Jersey Clean Energy Rebate Programs COOLAdvantage WARMAdvantage
Manual J & S Training Class, Per Person Training Cost:Ground Shipping $20.00:______, 2nd Day Air $35.00:______, Next Day Air $65.00:_______
$500. Shipping: _____
Company Name: ________________________________________________ Owners Name:____________________________________________________ Address: _______________________________________________________ Town: ______________________________ State: _______ Zip Code: _____ Phone #: _____________________ Cell #: ____________________________ E-Mail Address: _________________________________________________Credit Card #: ____________________________ Exp #: ______ PIN #: _____Name on Credit Card: ______________________________________________
March 12th, 2019 - Please RSVP by 03/08/2019
M1401.3 Equipment and appliance sizing. Heating and cooling equipment and appliances shall be sized in accordance with ACCA Manual S or other approved sizing methodologies based on building loads calculated in accordance with ACCA Manual J or other approved heating and cooling calculation methodologies.Exception: Heating and cooling equipment and appliance sizing shall not be limited to the capacities determined in accordance with Manual S where either of the following conditions applies:
1. The specified equipment or appliance utilizes multistage technology or variable refrigerant flow technology and the loads calculated in accordance with the approved heating and cooling calculation methodology are within the range of the manufacturer’s published capacities for that equipment or appliance.2. The specified equipment or appliance manufacturer’s published capacities cannot satisfy both the total and sensible heat gains calculated in accordance with the approved heating and cooling calculation methodology and the next larger standard size unit is specified.M1601.1 Duct design. Duct systems serving heating, cooling and ventilation equipment shall be installed in accordance with the provisions of this section and ACCA Manual D, the appliance manufacturer’s installation instructions or other approved methods.
NOTE: Ask your Wholesalers & Equipment Manufactures to use your CO-OP Funds/ Money to Pay for the Elite Software Programs & the Training Classes.
Total Billed to your Credit Card: Total: _____
As Per Code - 2015 IRC - International Residential Code - Mandatory
As Per Code - 2015 IECC - International Energy Conservation Code - MandatoryR403.7 Equipment sizing and efficiency rating (Mandatory). Heating and cooling equipment shall be sized in accordance with ACCA Manual S based on building loads calculated in accordance with ACCA Manual J or other approved heating and cooling calculation methodologies. New or replacement heating and cooling equipment shall have an efficiency rating equal to or greater than the minimum required by federal law for the geographic location where the equipment is installed.
• Cost for Training Class $500 Per Person• This Includes 5 Hours of Phone Support after Class• Location: American Legion - Post 129
2025 Church Road, Toms River, New Jersey 08753Training Starts: 8:00 am, Ends: At 3:00 pm
• What you need to bring to the Class:Windows Lap-Top w/ CD w/ Mouse & Mouse Pad, w/WiFi Able,Note Book & Pen, Elite Software, will run on Apple Computerswith a Apple Windows Emulator, called Fusion by VM WARE.***Non-Refundable For No Shows***Maximum 20 People***
Joe Navarra - Owner/ Manager - 848-992-7392 E-MAIL: [email protected]
WEBSITE: hvacrcomfortpro.com
ACCA MANUAL - "J" & "S" TRAINING
ACCA ELITE Software - Rhvac 9, Ductsize, & Drawing Board Program Cost: $899.Single User License Pricing
Learn the Easy Way to do Block Loads or Room x Room Whole House Load Calculations
***Coffee, Donuts & Sandwiches for Lunch***
We offer group training at your office location, please call us for pricing.
New Jersey Clean Energy Rebate Programs COOLAdvantage WARMAdvantage
Manual J & S Training Class, Per Person Training Cost:Ground Shipping $20.00:______, 2nd Day Air $35.00:______, Next Day Air $65.00:_______
$500. Shipping: _____
Company Name: ________________________________________________ Owners Name:____________________________________________________ Address: _______________________________________________________ Town: ______________________________ State: _______ Zip Code: _____ Phone #: _____________________ Cell #: ____________________________ E-Mail Address: _________________________________________________Credit Card #: ____________________________ Exp #: ______ PIN #: _____Name on Credit Card: ______________________________________________
March 12th, 2019 - Please RSVP by 03/08/2019
M1401.3 Equipment and appliance sizing. Heating and cooling equipment and appliances shall be sized in accordance with ACCA Manual S or other approved sizing methodologies based on building loads calculated in accordance with ACCA Manual J or other approved heating and cooling calculation methodologies.Exception: Heating and cooling equipment and appliance sizing shall not be limited to the capacities determined in accordance with Manual S where either of the following conditions applies:
1. The specified equipment or appliance utilizes multistage technology or variable refrigerant flow technology and the loads calculated in accordance with the approved heating and cooling calculation methodology are within the range of the manufacturer’s published capacities for that equipment or appliance.2. The specified equipment or appliance manufacturer’s published capacities cannot satisfy both the total and sensible heat gains calculated in accordance with the approved heating and cooling calculation methodology and the next larger standard size unit is specified.M1601.1 Duct design. Duct systems serving heating, cooling and ventilation equipment shall be installed in accordance with the provisions of this section and ACCA Manual D, the appliance manufacturer’s installation instructions or other approved methods.
NOTE: Ask your Wholesalers & Equipment Manufactures to use your CO-OP Funds/ Money to Pay for the Elite Software Programs & the Training Classes.
Total Billed to your Credit Card: Total: _____
As Per Code - 2015 IRC - International Residential Code - Mandatory
As Per Code - 2015 IECC - International Energy Conservation Code - MandatoryR403.7 Equipment sizing and efficiency rating (Mandatory). Heating and cooling equipment shall be sized in accordance with ACCA Manual S based on building loads calculated in accordance with ACCA Manual J or other approved heating and cooling calculation methodologies. New or replacement heating and cooling equipment shall have an efficiency rating equal to or greater than the minimum required by federal law for the geographic location where the equipment is installed.
• Cost for Training Class $500 Per Person• This Includes 5 Hours of Phone Support after Class• Location: American Legion - Post 129
2025 Church Road, Toms River, New Jersey 08753Training Starts: 8:00 am, Ends: At 3:00 pm
• What you need to bring to the Class:Windows Lap-Top w/ CD w/ Mouse & Mouse Pad, w/WiFi Able,Note Book & Pen, Elite Software, will run on Apple Computerswith a Apple Windows Emulator, called Fusion by VM WARE.***Non-Refundable For No Shows***Maximum 20 People***
Joe Navarra - Owner/ Manager - 848-992-7392 E-MAIL: [email protected]
WEBSITE: hvacrcomfortpro.com
ACCA MANUAL - "J" & "S" TRAINING
ACCA ELITE Software - Rhvac 9, Ductsize, & Drawing Board Program Cost: $899.Single User License Pricing
Learn the Easy Way to do Block Loads or Room x Room Whole House Load Calculations
***Coffee, Donuts & Sandwiches for Lunch***
We offer group training at your office location, please call us for pricing.
New Jersey Clean Energy Rebate Programs COOLAdvantage WARMAdvantage
Manual J & S Training Class, Per Person Training Cost:Ground Shipping $20.00:______, 2nd Day Air $35.00:______, Next Day Air $65.00:_______
$500. Shipping: _____
Company Name: ________________________________________________ Owners Name:____________________________________________________ Address: _______________________________________________________ Town: ______________________________ State: _______ Zip Code: _____ Phone #: _____________________ Cell #: ____________________________ E-Mail Address: _________________________________________________Credit Card #: ____________________________ Exp #: ______ PIN #: _____Name on Credit Card: ______________________________________________
March 12th, 2019 - Please RSVP by 03/08/2019
M1401.3 Equipment and appliance sizing. Heating and cooling equipment and appliances shall be sized in accordance with ACCA Manual S or other approved sizing methodologies based on building loads calculated in accordance with ACCA Manual J or other approved heating and cooling calculation methodologies.Exception: Heating and cooling equipment and appliance sizing shall not be limited to the capacities determined in accordance with Manual S where either of the following conditions applies:
1. The specified equipment or appliance utilizes multistage technology or variable refrigerant flow technology and the loads calculated in accordance with the approved heating and cooling calculation methodology are within the range of the manufacturer’s published capacities for that equipment or appliance.2. The specified equipment or appliance manufacturer’s published capacities cannot satisfy both the total and sensible heat gains calculated in accordance with the approved heating and cooling calculation methodology and the next larger standard size unit is specified.M1601.1 Duct design. Duct systems serving heating, cooling and ventilation equipment shall be installed in accordance with the provisions of this section and ACCA Manual D, the appliance manufacturer’s installation instructions or other approved methods.
NOTE: Ask your Wholesalers & Equipment Manufactures to use your CO-OP Funds/ Money to Pay for the Elite Software Programs & the Training Classes.
Total Billed to your Credit Card: Total: _____
As Per Code - 2015 IRC - International Residential Code - Mandatory
As Per Code - 2015 IECC - International Energy Conservation Code - MandatoryR403.7 Equipment sizing and efficiency rating (Mandatory). Heating and cooling equipment shall be sized in accordance with ACCA Manual S based on building loads calculated in accordance with ACCA Manual J or other approved heating and cooling calculation methodologies. New or replacement heating and cooling equipment shall have an efficiency rating equal to or greater than the minimum required by federal law for the geographic location where the equipment is installed.
• Cost for Training Class $500 Per Person• This Includes 5 Hours of Phone Support after Class• Location: American Legion - Post 129
2025 Church Road, Toms River, New Jersey 08753Training Starts: 8:00 am, Ends: At 3:00 pm
• What you need to bring to the Class:Windows Lap-Top w/ CD w/ Mouse & Mouse Pad, w/WiFi Able,Note Book & Pen, Elite Software, will run on Apple Computerswith a Apple Windows Emulator, called Fusion by VM WARE.***Non-Refundable For No Shows***Maximum 20 People***
Easy Registration Online or by Email
CE - Continuing Education Credits Required Master HVACR Contractor License Training Class
Register Now for Fall Classes
New Jersey State Required 5-Hour Class
Details:Training fee $200 per person (non-refundable for no-show). 9Registration must be completed and confirmed prior to the class. 9NO WALK-INS.Seating limited to 50 students. 9Bring your photo identification (drivers license or passport) 9plus your Master HVACR Contractor License Card. Both are required at check-in.Check-in begins at 7:45 a.m. Class time 8:30 a.m. - 2:30 p.m. 9Continental breakfast and lunch provided. 9Certificate of Completion provided at end of class. Must be present to receive. 9Location: 9 American Legion Post 129, 2025 Church Road, Toms River NJ 08753.Class Instructor: Joe Navarra. 9Call 848-992-7392 to inquire about group training at your location. 9
Joe Navarra, Owner and [email protected]
www.hvacrcomfortpro.com848-992-7392
Class Subjects:Review of the Law and Public Safety 92015 IRC and 2015 IECC - Code 9Sealing Duct Work 9Duct Leakage Testing 9No Supply of Return Panning 9ACCA Manuals J, S, and D 9ACCA Manuals Zr, T, and B 9Training Review: ACCA Approved Elite Software Program 9for Manual J, S, and D; RHVAC, Draw Board, and Duct Sizing
Master HVACR Contractor License Number 19HC00194800 and HVACR CE Sponsor License Number 19SP00024600
Class Date ___________________________________________________________________________________Business Name _______________________________________________________________________________Name on Your HVACR License ___________________________________________________________________Cell #_____________________________ Email Address ______________________________________________NJ Master HVACR Contractor License Number: 19HC________________________________________________Credit Card # _________________________________________________ Exp. ____________ CVV# __________Name on Credit Card ___________________________________________________________________________Signature ____________________________________________________________________________________
For your convenience, you may register either online at www.hvacrcomfortpro.com, or by completing the form below and emailing it to [email protected]. When registering online, be prepared to provide the same informa-tion as is included in this form. Class dates above and at at www.hvacrcomfortpro.com/training/.
Drawing for 1 FREE Software Package ($919 value)+50/50 Raffle to benefit the American Legion!
Class Dates:September 7 September 8September 14September 15September 18September 21September 25September 29