avocado case study - bam-fxbamagsolutions.com/.../2016/07/avocado-case-study_2...avocado case study...
Post on 23-Sep-2020
0 Views
Preview:
TRANSCRIPT
Avocado Case Study Larger Fruit with Higher Nutrition When Using BAM-FX™
The effects of BAM-FX were evaluated through a Hass avocado field study with a grower in
Temecula, California during the period February 2015 through March 2016. The objective was to
restore tree vigor, stimulate new growth and produce fruit. A total of 52 trees, each approximately
10-12 feet in height, were used in the trial. 42 trees were treated with BAM-FX and standard
fertilizer protocol with a 10-tree control using only standard fertilizer protocols. Three separate
BAM-FX treatments of root drench and/or foliar spray were applied. All trees selected had
measurable Zinc deficiency, significant signs of tip burn from exposure to low temperatures and
had struggled to grow or produce fruit for the past several years, primarily resulting from Nitrogen
deficiency and excessive Chloride levels in the trees.
Results
As a result of just one season’s application of BAM-FX, leaf analysis conducted by Fruit Growers Lab, Inc.,
in independent lab, showed BAM-FX increased Zinc and Nitrogen levels, reduced Chloride levels while
improving the Phosphorus to Zinc ratio. The BAM-FX treated trees exhibited significantly improved
vitality expressed by growth, fruit yield and quality:
Control Avocado tree shows significant signs of ‘tip burn’ BAM-FX™ treated Avocado tree has lush green leaves
Increased Zinc levels Overall better looking trees Larger fruit size and higher yield
Improved Nitrogen levels
Decreased Chloride levels
Higher nutrient content in Avocado fruit
Benefits of BAM-FX:
6.29.16
BAM Agricultural Solutions, Inc. www.bamagsolutions.com
561.416.0400
Copyright © 2016 BAM Agricultural Solutions, Inc.
Control tree ‘Summer Flush’ BAM-FX™ treated tree ‘Summer Flush’ visually better and further along
Recommended Application Method, Frequency and Rate for Avocado Trees
The suggested protocol is fully customizable and can be adjusted to meet your specific needs. The
positive results obtained during the field study with the Hass avocado grower used the following
application protocol:
1st application prior to flowering at 1 oz. BAM-FX/gallon of water foliar and 1 oz. BAM-FX/gallon of water root drench .
2nd application prior to fruit set, but during flowering at the same rate and method as 1st application. 3rd application approximately two months later at 0.5 oz. BAM-FX/gallon of water foliar application .
Based on a number of successful avocado trials, a significant ROI can be obtained with a 4 oz. BAM-FX/
gallon of water root drench before budding and flowering and a follow on foliar application at 2 oz.
BAM-FX/gallon of water after fruit set and during “Summer Flush”.
PLEASE NOTE:
ALWAYS REFER TO AND FOLLOW BAM-FX LABEL APPLICATION AND SAFE HANDLING INSTRUCTIONS.
Control vs. BAM-FX Hass Avocado (both picked on same day)
About the BAM-FX™ Chemistry
BAM-FX (Bio-Available Minerals-Formula X) is a highly positively charged cationic Zinc2+ and cationic
Copper2+ solution balanced together in a specific ratio, along with sulfate and ammonium. This unique blend of
positive electrical charge, together with only the most bioavailable forms of these four elements (Zn, Cu, S, N),
results in a micro and macronutrient product that is far superior to all others in terms of application and
delivery of these nutrients where they are needed inside leaves and roots. Because these nutrients are
transported throughout the plant systemically, this proprietary formulation has many apparent positive effects,
such as faster seed germination and seedling growth, improved environmental stress tolerance, increased
biomass and greater yield and quality. BAM-FX works best when used as a foliar or root based application and
can be used safely in conjunction with a wide variety of other products. Contact your local CCA or PCA for more
details on rates and applications for your specific crop type and region.
top related