classroom preparation for viewsonics group 1 - chino.k12.ca.us
Post on 30-Jan-2022
7 Views
Preview:
TRANSCRIPT
Page 1 of 6
Chino Valley Unified School District
Scope of Work for
Classroom Preparation for ViewSonics Group 1
Contractors Class A & B Engineer’s Estimate: $95,000.00 Contractor Duration: 90 calendar days This project will cover five (5) school sites (Country Springs ES, Litel ES, Oak Ridge ES, Canyon Hills JHS and Townsend JHS) for a total of 39 classrooms. The successful contractor shall supply all labor, materials, services, insurance, and equipment necessary to complete the work. The Contractor shall thoroughly investigate the premises for a complete understanding of the scope of work required for this bid.
• Remove whiteboards from front of classrooms. Protect the whiteboards for re-installation. Re-install whiteboards on either side of new ViewSonic monitors. If the whiteboards are not usable for re-installation, District will furnish new whiteboards for contractor to install. The minimum distance between the whiteboards is 76”.
• Remove any smart boards and ceiling/wall mounted projectors from the rooms. Remove old steel TV stand backing plates. Contractor must deliver these items to the Maintenance Department after removal. Replace damaged ceiling tiles with District provided tiles/patch and paint walls where ceiling/wall mounted projects were located.
• Install new 3' x 2' plywood mounting board. Plywood to be good one side (G1S), 3/4" thick, routed round edges, sanded smooth from splinting, prime and painted to match the existing wall. Attach plywood to walls with 6 lag bolts attached to the wall studs. The lag bolts to be 3/8” x 4” and be used with a regular washer and split/lock washer.
• Install new electrical outlet and data box for the monitor. Mount boxes adjacent to the backer board, but not to interfere with the mount or movement of ViewSonic monitor. Power to be connected to a usable circuit above the ceiling. Run conductors in wall when available, otherwise surface mount the pathway using wire mold. Please reference the attached list of District standards for electrical, data, and wire molding materials.
• Repair any holes in vinyl tack board or drywall caused from scope of work. Any damaged ceiling tiles or vinyl tack board need to be replaced with District standard material.
• District will determine the front orientation of each classroom. • Clean and leave classroom free of dust and construction debris and ready for classes the
following day. Contractor is responsible for covering/protecting all furniture in the rooms while work is taking place.
• Awarded contractor will be responsible for the removal and disposable of construction debris. • All work needs to be completed after hours and/or weekends. Awarded contractor will be
supplied school calendars for each site relating to holiday, early releases, etc.
Page 2 of 6
District Standard Specifications: o Attached are specification sheets for the adjustable mount placements for the specific
school sites (elementary and junior/high schools). o Electrical materials:
Legrand V700 wiremold Hubbell Stainless Steel Receptacle Cover 20Amp Receptable Legrand V5747 Single Gang Device box 1 3/8” deep.
o Data materials: Panduit - 24 port shielded modular patch panel (CP24WSBLY) Panduit - 48 port shielded modular patch panel (CP48WSBLY) Panduit - Single CAT6A keystone jacks (CJ6X88TGBU) Panduit - Mini-Com 2 port Faceplate (CFPE2IWY) Panduit - Surface Raceway Low Voltage Junction Box, White (JBX3510WH-A) Panduit - Pan-Way Low Voltage Channel (LD3WH10-A)
Page 3 of 6
Country Springs ES o Total of 5 classrooms (Rooms: 29, 30, 31, 32, 33) o Room 29 – Needs to change out one (1) of the 8ft whiteboards to new 4ft whiteboard to
avoid wire mold at right side. Below is a photo as reference. Litel ES
o Total of 6 classrooms (Rooms: 29, 30, 31, 32, 33, 34) o Room 31 – removal of existing television and mounting equipment. Below is a photo as
reference.
Page 4 of 6
Oak Ridge ES o Total of 9 classrooms (Rooms: 29, 30, 31, 32, 33, 34, 35, 36, 37) o Room 30 – Needs to change out one (1) of the 8ft whiteboards to new 4ft whiteboard to
avoid wire mold at right side. Below is a photo as reference.
o Room 31 – Install at old television location. Below is a photo as reference.
o Room 32 – Remove empty wire mold from walls (next to flag) to make room for
whiteboards. Below is a photo as reference.
Page 5 of 6
Canyon Hills JHS o Total of 13 classrooms (Rooms:501, 502, 503, 504, 505, 506, 507, 508, 509, 510, 511,
512, 513) o Rooms 501,502,503, 504, 505, 506, 508, 509 – need to change out 8ft whiteboards to
4ft whiteboards on both sides of the ViewSonic. Below is a photo of room 503 as reference.
o Room 507 – remove and reinstall ViewSonic to specifications listed in scope of work. Whiteboards can remain in place. Below is a photo as reference.
Page 6 of 6
Townsend JHS o Total of 6 classrooms (Rooms: 413, 415, 416, 417, 418, 419) o Room 415 – Remove 16ft whiteboard. Install 4ft whiteboards on both sides of the
ViewSonic. Please note front of classroom is at projector side south. Below is a photo as reference.
o Room 419 – Needs to change out one (1) of the 8ft whiteboards to new 4ft whiteboard
NO
PA
RKIN
G
NO
PA
RKIN
G
NO
PA
RKIN
G
X
X
X
XX
XX
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
XX
X
XX
X
X
5/20/2016
1612200
#
11" = 30'-0"OVERALL SITE PLAN - NEW
MARK HARDWARESIZE KEYNOTESV/P E/N
SW = SWING
PR = PAIR
SGL = SINGLE
N = NEW
E = EXISTING
V = VECHICULAR
P = PEDESTRIAN
GATE SCHEDULE KEYNOTES:
LOCKABLE GATE WITH A KNOX BOX
TUBE STEEL GATE REFER X/X
ALL TUBE STEEL GATES ARE TO BE BUILT WITH SQUARE OR RECTANGULAR POSTS.
ALL CHAIN LINK GATES ARE TO BE BUILT WITH ROUND POSTS
TYPE
FOR ACCESSIBLE HARDWARE SEE CHAIN LINK FENCE SPECS FOR ACCESSIBLE GATES
SITE GATE SCHEDULE
XX
XXXXX
SITE GENERAL NOTES - NEW
X
X
X
X
X
X
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
X X X X X X X
X
X
XX
X
X X X X X X
XX
X
XX
X
XX
XX
5/20/2016
1611800
#
11" = 30'-0"OVERALL SITE PLAN - NEW
SITE GENERAL NOTES - NEW
MARK HARDWARESIZE KEYNOTESV/P E/N
SW = SWING
PR = PAIR
SGL = SINGLE
N = NEW
E = EXISTING
V = VECHICULAR
P = PEDESTRIAN
GATE SCHEDULE KEYNOTES:
LOCKABLE GATE WITH A KNOX BOX
TUBE STEEL GATE REFER X/X
ALL TUBE STEEL GATES ARE TO BE BUILT WITH SQUARE OR RECTANGULAR POSTS.
ALL CHAIN LINK GATES ARE TO BE BUILT WITH ROUND POSTS
TYPE
FOR ACCESSIBLE HARDWARE SEE CHAIN LINK FENCE SPECS FOR ACCESSIBLE GATES
SITE GATE SCHEDULE
DistributionPhuc Tran, WLC Architects, Inc.
4' HI MARKERBOARD
TV
LOWWALL
30"
73"TOP OF TV MOUNT
4' HI MARKERBOARD27"
60"DATA/POWER
12"
4"
CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21
(E) WD STUD PARTITION WALL
M M M ‘ M: wB
1(N) 2 x 6 STUD-
6'-0" FURRED WALLTV MOUNT &
TV, NIC-5=-
TOP OF WALL
n4 x BLOCKING- REF DET 22/9.1
2
1TV MOUNT & TV,-\REF DET 22/9.1 .
(E) WD STUD PARTITION WALL(N) (2)2x6 CONT TOP PLATE(N) 2x4 BRACE @ 32" OC W/ (3}-10d ATEAEND
u33"4"
NK5/8" GYP BD-----
(N) 2x6 WD STUDS @ 16" OC (ALIGN NEW STUDS W/(E) STUDS TYP) FURRING
HITI LOW-VELOCITY POWER DRIVEN FASTNER 0.138" DIA TYPE X-CW/1" EMBEDMENT TO CONCRETE AT 24” OC W/14 GA WASHERS(ICC-ES ESR-1663)
WOOD STUD WALLFILE/CSI NUMBHC XD11-002 REVISION DATE: JOB NUMBER: 1621600
FURRED WALL @ TV 10N.T.S.
27"
CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21
(N)f GYPSUM BOARD(N) 4x WOOD STUD BLOCKINGATTACHED W/ SIMPSON A35
(E) WD STUD PARTITION WALL
)
\
Jr
ADJUSTABLE WALL MOUNT,NIC
o
1ih
OLL
t>
TV MONITOR,NIC
W/P 9
)
MOUNTING BRACKETS, NIC
+3'-0" A.F.F.NOTE:MOUNTING HEIGHT OF TV TO BE THE SAME IN ALL WALL CONDITIONS. REFER TO DETAIL 10/- FORFURRED WALL BELOW
FILE/CSI NUMBER: XD11-002 JOB NUMBER: 1621600REVISION DATE:
9TV MOUNT DETAIL N.T.S.
47.25" AFF
50.25" AFF
71.5" AFF
73.0" AFF
CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21
8/23/2019 ViewSonic IFP7550 75 Interactive ViewBoard
https://www.viewsonic.com/us/catalog/product_datasheet/view/key/ifp7550.html 1/2
INTERACTIVE DISPLAY
IFP7550
Key FeaturesEnhanced Touchscreen Performance | Immersive Stereo Sound |
myViewBoard™ Annotation Software | ViewBoard Cast Content Sharing
Software | SmartPort USB™
Product DescriptionFeaturing 4K Ultra HD resolution and an advanced, next-generation touchscreen, the ViewSonic ViewBoard IFP7550 delivers incredible collaborative capabilities for 21st century boardrooms and
classrooms. With integrated myViewBoard annotation software and ViewBoard Cast streaming software, content creation and sharing has never been easier. What’s more, this ENERGY STAR certified
display delivers optional slot-in PC capability for more computing-intensive interactive applications. A VESA-compatible design allows for installation on a wall mount, or on an optional trolley cart for
more flexible installation in classrooms and meeting rooms.
Menu Contro lsUSB 2 .0 x3VESA® Compat ib le Wal lMount (800 x 400 mm)HDMI 2 .0 I nHDMI Out
USB 2 .0USB B Touch Por t x2VGA I nAudio I nHDMI 2 .0 I n x2Camera Por t
USB 3 .0Composi te RCA Video I nAudio OutEthernet Lan (RJ45)RS232SPDIF
75"DISPLAY
RESOLUTION 20-PointTOUCH INTERACTIVE
Contact Salescall: 888.881.8781
email: salesinfo@viewsonic.com
visit: viewsonic.com
® ®
®
VIEWSONIC DISPLAY
CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21
8/23/2019 ViewSonic IFP7550 75 Interactive ViewBoard
https://www.viewsonic.com/us/catalog/product_datasheet/view/key/ifp7550.html 2/2
Display:Display Size (in.): 75
Viewable Area (in.): 74.5
Light Source: LED
Resolution: 3840 x 2160
Aspect Ratio: 16:9
Static Contrast Ratio: 1,200:1
Backlight Life (Hours): 50,000
Brightness: 350 cd/m2
Response Time ( Typical GTG): 8ms
Viewing Angles: 178º horizontal, 178º vertical
Panel Surface: Anti-glare 7H tempered glass
Networking:Ethernet LAN: 10/100/1000 Mbps
Embedded Player:Android Version: 7.0
GPU: ARM Mali450 Quad Core
CPU: ARM Dual Core Cortex A73
CPU Processor Speed: 1.2GHz
Memory: 2GB
Storage: 16GB
Interface: OSD / Remote Control / Annotation overlay
Audio:Internal Speakers: 10W (x2)
Subwoofer: 15W (x1)
Connector:HDMI 2.0(3), HDMI Out(1), VGA(1), Composite RCA(1), 3.5mm Audio In(1), 3.5mm Audio Out(1), SPDIFAudio Out(1), USB 3.0(2), USB 2.0(4), Slot-in PC Slot(1), USB B Touch Port(2), RS232(1), Ethernet LAN(RJ45)(1), WIFI Module Slot(1)
Power:Voltage: 100-240 VAC
Consumption (typical): 350W
Stand-by: <0.5W
Controls:On Screen Display: Input, Volume, Backlight, Audio, Screen, Display, Adjust
Remote Control: Volume, Channel, Source, Mute, Back, Input, Menu
Operating Conditions:Temperature: 32-104º F (0 - 40º C)
Humidity (non-condensing): 10-90%
Touch:Touch Technology: Infrared
Touch Points: 20-Point Touch
Tip Detection: Dual tips, 3mm and 8mm
Weight (metric):Net (kg): 53.0
Gross (kg): 65.0
Weight (imperial):Net (lbs): 116.8
Gross (lbs): 143.3
Dimensions (metric) (WxHxD):Packaging (mm): 1930.0 x 1140.0 x 280.0
Physical (mm): 1710.0 x 1020.0 x 90.0
Dimensions (imperial) (WxHxD):Packaging (in.): 76.0 x 44.9 x 11.0
Physical (in.): 67.3 x 40.2 x 3.5
Mount:VESA Compatible: 800 x 400 mm
Additional Hardware:Camera Mounting Bracket: 1
General:Warranty: 3-year limited warranty on parts, labor and backlight, onsite warranty
Recycle/Disposal: Please dispose of in accordance with local, state or federal laws.
PACKAGE CONTENTS: IFP7550 display, stylus pen x 2, power cable, HDMI cable, USB cable, AV cable,remote control with batteries, Camera plate, M8 screw x 8, Quick Start Guide
Regulations: cTUVus, FCC, ENERGY STAR, Mexico Energy, CE, CB, RoHS, ErP, WEEE
UPC: 766907901610
Accessories:Intel Unite, LB-PEN-002, LB-WIFI-001, NMP660, PD-IFP-001, PD-IFP-002, PD-IFP-003, PD-IFP-004, STND-047, SW-071, SW-072, SW-072-2, SW-073, SW-073-2, SW-074, SW-074-2, SW-075, SW-075-2, SW-101,SW-UP-117, VB-BLF-001, VB-BLF-002, VB-BLF-003, VB-BLM-001, VB-BLM-002, VB-BLM-003, VB-BLW-001,VB-BLW-002, VB-BLW-003, VB-CAM-001, VB-EBL-001, VB-EBM-001, VB-EBS-001, VB-EBT-001, VB-EBV-001,VB-EBV-002, VB-EBW-001, VB-STND-001, VB-STND-002, VB-STND-003, VB-STND-004, VB-VIS-001, VB-WKB-001, VBD100, VBH100, VBS100, VPC10-WP-2, VPC10-WP-4, VPC10-WP-8, VPC14-WP-2, VPC14-WP-4,VPC15-WP-4, VPC15-WP-6, VPC16-WP-4, VPC17-WP-6, WMK-047-2
Awards:
Copyright © ViewSonic Corporation 2000-2019. All rights reserved. (08/23/2019 07:26 AM PST)
VIEWSONIC DISPLAY
CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21
https://www.viewsonic.com/in/products/viewboard/IFP7550.php
VIEWSONIC DISPLAYCVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21
DistributionPhuc Tran, WLC Architects, Inc.
4' HI MARKERBOARD
TV
LOWWALL
DATA/POWER
12"
4"
CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21
(N)f GYPSUM BOARD(N) 4x WOOD STUD BLOCKINGATTACHED W/ SIMPSON A35
(E) WD STUD PARTITION WALL
)
\
Jr
ADJUSTABLE WALL MOUNT,NIC
o
1ih
OLL
t>
TV MONITOR,NIC
W/P 9
)
MOUNTING BRACKETS, NIC
+3'-0" A.F.F.NOTE:MOUNTING HEIGHT OF TV TO BE THE SAME IN ALL WALL CONDITIONS. REFER TO DETAIL 10/- FORFURRED WALL BELOW
FILE/CSI NUMBER: XD11-002 JOB NUMBER: 1621600REVISION DATE:
9TV MOUNT DETAIL N.T.S.
47.25" AFF
50.25" AFF
71.5" AFF
73.0" AFF
CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21
8/23/2019 ViewSonic IFP7550 75 Interactive ViewBoard
https://www.viewsonic.com/us/catalog/product_datasheet/view/key/ifp7550.html 1/2
INTERACTIVE DISPLAY
IFP7550
Key FeaturesEnhanced Touchscreen Performance | Immersive Stereo Sound |
myViewBoard™ Annotation Software | ViewBoard Cast Content Sharing
Software | SmartPort USB™
Product DescriptionFeaturing 4K Ultra HD resolution and an advanced, next-generation touchscreen, the ViewSonic ViewBoard IFP7550 delivers incredible collaborative capabilities for 21st century boardrooms and
classrooms. With integrated myViewBoard annotation software and ViewBoard Cast streaming software, content creation and sharing has never been easier. What’s more, this ENERGY STAR certified
display delivers optional slot-in PC capability for more computing-intensive interactive applications. A VESA-compatible design allows for installation on a wall mount, or on an optional trolley cart for
more flexible installation in classrooms and meeting rooms.
Menu Contro lsUSB 2 .0 x3VESA® Compat ib le Wal lMount (800 x 400 mm)HDMI 2 .0 I nHDMI Out
USB 2 .0USB B Touch Por t x2VGA I nAudio I nHDMI 2 .0 I n x2Camera Por t
USB 3 .0Composi te RCA Video I nAudio OutEthernet Lan (RJ45)RS232SPDIF
75"DISPLAY
RESOLUTION 20-PointTOUCH INTERACTIVE
Contact Salescall: 888.881.8781
email: salesinfo@viewsonic.com
visit: viewsonic.com
® ®
®
VIEWSONIC DISPLAY
CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21
8/23/2019 ViewSonic IFP7550 75 Interactive ViewBoard
https://www.viewsonic.com/us/catalog/product_datasheet/view/key/ifp7550.html 2/2
Display:Display Size (in.): 75
Viewable Area (in.): 74.5
Light Source: LED
Resolution: 3840 x 2160
Aspect Ratio: 16:9
Static Contrast Ratio: 1,200:1
Backlight Life (Hours): 50,000
Brightness: 350 cd/m2
Response Time ( Typical GTG): 8ms
Viewing Angles: 178º horizontal, 178º vertical
Panel Surface: Anti-glare 7H tempered glass
Networking:Ethernet LAN: 10/100/1000 Mbps
Embedded Player:Android Version: 7.0
GPU: ARM Mali450 Quad Core
CPU: ARM Dual Core Cortex A73
CPU Processor Speed: 1.2GHz
Memory: 2GB
Storage: 16GB
Interface: OSD / Remote Control / Annotation overlay
Audio:Internal Speakers: 10W (x2)
Subwoofer: 15W (x1)
Connector:HDMI 2.0(3), HDMI Out(1), VGA(1), Composite RCA(1), 3.5mm Audio In(1), 3.5mm Audio Out(1), SPDIFAudio Out(1), USB 3.0(2), USB 2.0(4), Slot-in PC Slot(1), USB B Touch Port(2), RS232(1), Ethernet LAN(RJ45)(1), WIFI Module Slot(1)
Power:Voltage: 100-240 VAC
Consumption (typical): 350W
Stand-by: <0.5W
Controls:On Screen Display: Input, Volume, Backlight, Audio, Screen, Display, Adjust
Remote Control: Volume, Channel, Source, Mute, Back, Input, Menu
Operating Conditions:Temperature: 32-104º F (0 - 40º C)
Humidity (non-condensing): 10-90%
Touch:Touch Technology: Infrared
Touch Points: 20-Point Touch
Tip Detection: Dual tips, 3mm and 8mm
Weight (metric):Net (kg): 53.0
Gross (kg): 65.0
Weight (imperial):Net (lbs): 116.8
Gross (lbs): 143.3
Dimensions (metric) (WxHxD):Packaging (mm): 1930.0 x 1140.0 x 280.0
Physical (mm): 1710.0 x 1020.0 x 90.0
Dimensions (imperial) (WxHxD):Packaging (in.): 76.0 x 44.9 x 11.0
Physical (in.): 67.3 x 40.2 x 3.5
Mount:VESA Compatible: 800 x 400 mm
Additional Hardware:Camera Mounting Bracket: 1
General:Warranty: 3-year limited warranty on parts, labor and backlight, onsite warranty
Recycle/Disposal: Please dispose of in accordance with local, state or federal laws.
PACKAGE CONTENTS: IFP7550 display, stylus pen x 2, power cable, HDMI cable, USB cable, AV cable,remote control with batteries, Camera plate, M8 screw x 8, Quick Start Guide
Regulations: cTUVus, FCC, ENERGY STAR, Mexico Energy, CE, CB, RoHS, ErP, WEEE
UPC: 766907901610
Accessories:Intel Unite, LB-PEN-002, LB-WIFI-001, NMP660, PD-IFP-001, PD-IFP-002, PD-IFP-003, PD-IFP-004, STND-047, SW-071, SW-072, SW-072-2, SW-073, SW-073-2, SW-074, SW-074-2, SW-075, SW-075-2, SW-101,SW-UP-117, VB-BLF-001, VB-BLF-002, VB-BLF-003, VB-BLM-001, VB-BLM-002, VB-BLM-003, VB-BLW-001,VB-BLW-002, VB-BLW-003, VB-CAM-001, VB-EBL-001, VB-EBM-001, VB-EBS-001, VB-EBT-001, VB-EBV-001,VB-EBV-002, VB-EBW-001, VB-STND-001, VB-STND-002, VB-STND-003, VB-STND-004, VB-VIS-001, VB-WKB-001, VBD100, VBH100, VBS100, VPC10-WP-2, VPC10-WP-4, VPC10-WP-8, VPC14-WP-2, VPC14-WP-4,VPC15-WP-4, VPC15-WP-6, VPC16-WP-4, VPC17-WP-6, WMK-047-2
Awards:
Copyright © ViewSonic Corporation 2000-2019. All rights reserved. (08/23/2019 07:26 AM PST)
VIEWSONIC DISPLAY
CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21
https://www.viewsonic.com/in/products/viewboard/IFP7550.php
VIEWSONIC DISPLAYCVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21
top related