decorative coin purses
Post on 26-Oct-2021
3 Views
Preview:
TRANSCRIPT
Copyright © 2014 Threads n Scissors
All rights reserved. Unauthorized reproduction, in any manner, is prohibited.
Http://www.threadsnscissors.com
You will need to stitch the following:
1 x design back
1 x design front
1 x design flap
Method
For the back piece. (load back design to your machine)
Hoop 1 later of cutaway stabilizer. Stitch the first color. Place a piece of batting
and fabric over the stitched area. Use temporary adhesive spray to hold in
place. Stitch the second color. This tacks the fabric and batting in place. Stitch
the next color. This is the decorative quilting stitch.
Materials
Cotton Fabric (plain and printed)
Temporary Adhesive
Spray
Thin Batting
Hook and Loop tape
Cutaway stabilizer
Decorative Coin Purses
Copyright © 2014 Threads n Scissors
All rights reserved. Unauthorized reproduction, in any manner, is prohibited.
Http://www.threadsnscissors.com
Remove the hoop from the machine and turn over so the backside faces up. Place a piece of fabric over the stitched area. Use temporary adhesive spray to hold in place. Stitch the next color. Remove the hoop from the machine and trim away excess fabric and batting from both sides of the hoop. Stitch the last color.
The Front piece. (load front design to your machine)
Hoop 1 later of cutaway stabilizer. Stitch the first color. Place a piece of batting and fabric over the stitched
area. Use temporary adhesive spray to hold in place. Stitch the second color. This tacks the fabric and bat-
ting in place. Stitch the next color. This is the decorative quilting stitch. Stitch the next color. This is the
hook and loop placement line.
Copyright © 2014 Threads n Scissors
All rights reserved. Unauthorized reproduction, in any manner, is prohibited.
Http://www.threadsnscissors.com
Cut a piece of hook and loop tape. Split the two halves. Keep the one half for the flap. Place the other half over the placement line. Use temporary adhesive spray to hold in place. Stitch the next color. Trim away the
excess hook and loop tape.
Remove the hoop from the machine and turn over so the backside faces up. Place a piece of fabric over the stitched area. Use temporary adhesive spray to hold in place. Stitch the next color. Remove the hoop from the machine and trim away excess fabric and batting from both sides of the hoop. Stitch the last color.
Copyright © 2014 Threads n Scissors
All rights reserved. Unauthorized reproduction, in any manner, is prohibited.
Http://www.threadsnscissors.com
Now for the Flap (load flap design to your machine)
Hoop 1 later of cutaway stabilizer. Stitch the first color. Place a piece of batting and fabric over the stitched area. Use temporary adhesive spray to hold in place. Stitch the second color. This tacks the fabric and bat-
ting in place. Stitch the next color. This is the decorative quilting stitch.
Remove the hoop from the machine and turn over so the backside faces up. Place a piece of fabric over the stitched area. Use temporary adhesive spray to hold in place. Stitch the next color. Remove the hoop from
the machine and trim away excess fabric and batting from both sides of the hoop.
Stitch the next color. This is the hook and loop placement line. Remove the hoop from the machine and turn it over. Place the other half of the hook and loop tape over the placement line on the backside of the design. Use temporary adhesive spray to hold in place. Stitch the next color. Trim away the excess hook and
loop tape.
Copyright © 2014 Threads n Scissors
All rights reserved. Unauthorized reproduction, in any manner, is prohibited.
Http://www.threadsnscissors.com
Stitch the last color.
Cut all the pieces out of the stabilizer.
Using a zig zag stitch on your sewing machine with matching upper and bobbin thread, sew the pieces to-gether as shown in the photos. Fist stitch the flap to the back piece. Then stitch the front piece to the back
piece matching the bottom of the pieces. The front piece is shorter than the back piece.
top related