diesel exhaust fluid dispensing systems - … · diesel exhaust fluid dispensing systems www ......
Post on 09-Aug-2018
233 Views
Preview:
TRANSCRIPT
1/3 HP DiaphragmPump
Portable 12V Diaphragm Pump
3/4 HP CentrifugalPump
• 3/4 HP Centrifugal Pump - 115V 60Hz• SureStop™ pressure switch for auto shut-off• Special DEF compliant shaft seal• Must prime on initial use• Stainless steel motor shaft and housing• 8-10 GPM flow rate• 1 year “Hassle Free” warranty
• 1/3 HP Diaphragm Pump - 115V 60Hz• Self priming• Stainless steel motor shaft• Polypropylene pump housing and EPDM diaphragm• 4-pole DEF motor• Built-in check valve• 7-9 GPM flow rate• 1 year “Hassle Free” warranty
• 12 Volt/10 Amp Diaphragm Pump• Self priming• Carbon Steel Pump Caddy• 12’ Power Cord• Polypropylene pump housing and EPDM diaphragm• 6-8 GPM flow rate• 1 year “Hassle Free” warranty
2
DRUM & TOTE PUMPS
YOU HAVE CHOICES...
1. What is the size of the fleet to be serviced today/ tomorrow and how much diesel fuel will be used?
2. What size package will deliver the greatest level of operating efficiency?
3. What is your application environment and what versatility will you require?
To determine which dispensing system best suits your operating requirements you need to answer three simple questions:
ToteDrum
Recommended Storage / Dispensing System Size Drum system Tote system
# Of SCR Vehicles 1 – 5 8 – 13
Diesel Fuel In Gallons Per Week 500 – 2,000 3,000 – 5,000
DEFUsage
In Gallons
Per Week 10 – 40 60 – 100
Per Month 40 – 160 240 – 400
Per Year 640 – 2,560 3,840 – 6,400
NOTE: * Above calculations based at 3% usage at average fuel economy of 6 miles per gallon. Container volume/mileage usage may vary depending on vehicle dosage rate.
Pump Comparison ChartAll AgSpray pumps are specifically designed and engineered for pumping Diesel Exhaust Fluid. Strong delivery pressure makes them ideal for use in dispensing DEF from drums or totes.
3www.AgSpray.com
DRUM DISPENSING SYSTEMS
The Piston Hand Pump, DEF dispensing system, comes with:
• Industrial grade polypropylene housing • Bung adaptor • 10’ dispensing hose • Manual Nozzle with pin lock feature• Expandable downtube• Hose Clamps• Drum not included
Piston Hand Pump System
⅓ HP Drum Dispensing SystemThe Drum, DEF dispensing system, comes with:
• 1/3 HP Diaphragm Pump• Plastic or Stainless steel automatic shut-off nozzle• 4 ft. suction hose • Dispense hose (in various lengths) • Carbon steel pump bracket• Requires part #DEF756-008B, EPV Dispense Coupler to connect to AgSpray drums (sold separately)• Drum not included
Piston Hand Pump
Dispense Hose
Stainless Steel Spout
Bung Adapter
Part Number Dispense Hose Length Pump
ASER12068010 10’ Piston Hand Pump
Part Number Dispense Hose Length Pump & Pump Features (see page 2 for additional details on pumps)
Dispense Coupler
When using this dispensing system
with AgSpray drums, be sure to order the
Dispense Coupler. Part# DEF756-008B
Additional Required Part Plastic or Stainless Steel
Automatic Shut-Off Nozzle
Carbon Steel Pump Bracket
Mounts on drum and provides a stable base to
hold your pump
Dispense HoseSuction Hose
Pump
1/3 HP Diaphragm Pump
ISO 22241Compatible Materials
of Construction
ISO 22241Compatible Materials
of Construction
or
ASETB20MN(with Plastic Nozzle)
20’• Manual On/Off • 115v 60 Hz• Self Priming • Flow rate of 7 to 9 gpm• Operating pressure 1.6 bar (25 psi) • 1 year “Hassle Free” pump warrantyASETB20SN
(with SS Nozzle)20’
Drum System with 1/3 HP Diaphragm Pump
4
TOTE DISPENSING SYSTEMS
The Tote,DEFdispensing system, comes with:
• Choice of pump• Plastic or Stainless steel automatic shut-off nozzle• 4 ft. suction hose • Dispense hose (in various lengths) • Carbon steel pump bracket• Requires part # DEF744- 048 Stainless Steel Coupler, or BEDEFPTDC Poly Coupler to connect to AgSpray totes (sold separately)• Tote not included
⅓ HP Tote Dispensing System ISO 22241Compatible Materials
of Construction
(Tote not included)
Suction Hose 3/4” diameter. All AgSpray hoses meet ISO 22241 guidelines for use with DEF fluid.
Dispense Coupler
When using this dispensing system with AgSpray totes, be sure to order the Dispense Coupler or Poly Coupler. Part# DEF744-048 Part# BEDEFPTDC
Additional Required Part
Plastic or Stainless Steel Automatic Shut-Off Nozzle
Dispense Hose3/4” diameter, available
in various lengths. All AgSpray hoses meet ISO 22241 guidelines for
use with DEF fluid.
Pump
Choose from: • 1/3 HP Diaphragm Pump • Portable 12V Diaphragm
Pump
Tote System with 1/3 HP Diaphragm Pump
Part Number Dispense Hose Length Pump & Pump Features (see page 2 for additional details on pumps)
or
ASE12V20SN(with SS Nozzle)
20’ • 12’ power cord with in-line fuse and battery clips • Flow rate of 6-8 gpm• Carbon Steel Pump Caddy • Self Priming • Dispense Hose available in 10’, 20’ and 30’ • 1 year “Hassle Free” pump warranty
Portable 12V, 1/3 HP Diaphragm Pump with Caddy
Portable 12V Diaphragm Pump
Part# ASE12V20SN
Also available with:
ASETB20MN(with Plastic Nozzle)
20’• Manual On/Off • 115v 60 Hz• Self Priming • Flow rate of 7 to 9 gpm• Operating pressure 1.6 bar (25 psi) • 1 year “Hassle Free” pump warrantyASETB20SN
(with SS Nozzle)20’
5
TOTE DISPENSING SYSTEMS
The Tote, DEF dispensing system, comes with:
• 3/4 HP Electric Centrifugal Pump• Stainless steel automatic shut-off nozzle• 4 ft. suction hose • Dispense hose (in various lengths) • Stainless steel pump bracket• Requires part # DEF744-048 Stainless Steel Coupler, or BEDEFPTDC Poly Coupler to connect to AgSpray totes (sold separately)• Tote not included
¾ HP Tote Dispensing System ISO 22241Compatible Materials
of Construction
(Tote not included)
Suction Hose
3/4” diameter. All AgSpray hoses
meet ISO 22241 guidelines for use
with DEF fluid.
Dispense Coupler
When using this dispensing system with AgSpray totes, be sure to order the Dispense Coupler or Poly Coupler. Part# DEF744-048 Part# BEDEFPTDC
Additional Required Part
Stainless Steel Automatic Shut-Off Nozzle
Dispense Hose3/4” diameter, available
in various lengths. All BlueDEF™ hoses meet
ISO 22241 guidelines for use with DEF fluid.
Part Number Dispense Hose Length Pump & Pump Features (see page 2 for additional details on pumps)
Pump
3/4 HP Electric Centrifugal Pump
SureStop™ pressure switch for auto
shut-off
www.AgSpray.com
ASETBCSS20(with SS Nozzle)
20’ • SureStop™ pressure switch for auto shut-off • 115v 60 Hz• Must prime on initial use • Flow rate of 8 to 10 gpm• Operating pressure 8 bar • 1 year “Hassle Free” pump warranty
Tote System with 3/4 HP Electric Centrifugal Pump
6
MOBILE DISPENSING SYSTEMS
ASETTP110 110 gallonTruck Tank
• 12’ power cord with in-line fuse and battery clips • Flow rate of 6-8 gpm• Self Priming • 1 year “Hassle Free” pump warrantyASETTP155 155 gallon
Truck Tank
Part Number Dispensing Unit Capacity Pump & Pump Features
Portable Truck Tank with 12V Diaphragm Pump
ISO 22241Compatible Materials
of Construction
Dispense Hose3/4” diameter.
All AgSpray hoses meet ISO 22241
guidelines for use with DEF fluid.
(Drum not included)
Suction Hose 3/4” diameter. All AgSpray hoses meet ISO 22241 guidelines for use with DEF fluid.
Heavy Duty Steel Construction Powder coated finish. Built in nozzle holder and hose hanger on cart handle.
Swivel Locking Front Wheel
Holds cart steady on flat and slanted
surfaces.
Pump 1/3 HP Electric Diaphragm Pump
ASE12V20SN-MC 20’ • Stainless Steel Automatic Shut-off Nozzle • 12v - 10 Amps• Self Priming • Flow rate of 6 to 8 gpm• Viton Check Valve • 1 year “Hassle Free” pump warranty
Mobile Drum Cart with 1/3 HP Diaphragm Pump
Mobile Drum Cart with Portable 12V Diaphragm Pump
Part Number Dispense Hose Length Pump & Pump Features (see page 2 for additional details on pumps)
Dispense Hose
¾” diameter, available in a 40’ length (no hose reel) or a 25’ hose mounted on hose reel. AgSpray hoses meet ISO 22241 guidelines for use with DEF fluid.
PumpPortable 12V Diaphragm Pump
Stainless Steel Automatic Shut-Off NozzleRugged design for long life and reliable service. 19mm nozzle spout
The Truck Tank, DEFdispensing system, comes with: • 12V self-priming diaphragm pump• 20 ft dispense hose • 4 ft Suction hose • Forklift recesses • Lockable lid for security • Integrated carry handles• Molded recesses for tie-downs during transport
The Mobile Drum Cart, DEF dispensing system, comes with:
• 1/3 HP Diaphragm Pump• Heavy duty steel, 3 wheel drum cart• Stainless steel automatic shut-off nozzle• 4 ft. suction hose • 10’ dispense hose• Stainless steel pump bracket • Requires part # DEF756-008B, Dispense Coupler to connect to AgSpray drums (sold separately)• Drum not included
Truck Tank System
Mobile Drum Cart System
Stainless Steel Automatic Shut-Off Nozzle
(BlueDEF not included)
ASETB20SN-MC 20’ • Stainless Steel Automatic Shut-off Nozzle • 115v 60 Hz• Self Priming • Flow rate of 7 to 9 gpm• Operating pressure 1.6 bar (25 psi) • 1 year “Hassle Free” pump warranty
7
ACCESSORIES DISPENSING SYSTEMS
Tote Dispense Coupler Part# DEF744-048
• For use with stainless steel valve or poly 4 pin Valve for AgSpray Totes (DEF275S & DEF330S)• Stainless steel
Poly Tote Dispense Coupler Part# BEDEFPTDC
• For use with stainless steel valve or poly 4 pin Valve for AgSpray Totes (DEF275S & DEF330S)• Glass Filled Nylon
Drum Dispense Coupler Part# DEF756-008B
• For use with plastic 3 pin valve on BlueDEF™ drums (DEF001)• Stainless steel
Couplers
Flow Meter
DEF Flow Meter Part# DEFFM
• Turbine measuring system • Totalizer• Reinforced polyamide body • Flow indication• Threaded input/output, aligned • Measures gallons or liters • Runs on 2 AAA batteries male/female depending on version
275 gallon insulated heat blanket, protects down to -34°C(-30°F) Part# DEFTH275BD-A
330 gallon insulated heat blanket, protects down to -34°C(-30°F) Part# DEFTH330BD-A
Insulated Heat Blanket for Totes
• Uniform, patented heat spreading technology• Protects DEF fluid and pump assembly, prevents freezing• Works on both metal and poly totes• Unique design allows for easy access to dispensing system
• UV, wind and water resistant• Certified to UL/CSA safety standards• 120V 60Hz and 12V options, 1440 Watts• Amperage – 12A, Resistance – 10.0 ohms, Ohms Range – 9.5 – 10.5
All AgSpray accessories are designed for dispensing Diesel Exhaust Fluid and are built with ISO 22241 compatible materials.
Hose Reel
Hose reel assembly with 25’ dispense hose Part# DEFHR25HOSE
• Open design allows for easy maintenance• Stores hose up and out of harm’s way, greatly extending service life of hose• Also available in 50’, 75’ and 100’
Nozzles
Stainless Steel Automatic Shut-Off Nozzle Part# DEFSN
• Rugged design for long life & reliable service • 19mm nozzle spout• Stainless steel main stem • Lever and lever guard for additional durability
ISO 22241Compatible Materials
of Construction
www.AgSpray.com
BULK
ISO 22241Compatible Materials
of Construction
To help maintain the purity of your diesel exhaust fluid, AgSpray storage tanks are constructed of DEF compatible high-density polyethylene (HDPE). These single wall constructed units come complete with all fittings and venting components pre-installed, making installation with your dispensing system easy.
COMPONENTS
STORAGE TANK• DEF compatible, single wall, HPDE, vertical storage
tank with non-vented manway – available in 500, 1,000, 2,000, 3,000, 6,500 and 8,400 gallon sizes
FITTING PACKAGE• 2” Stainless Steel Threaded Bulk Head Fitting in the
Sidewall of Tank - Fill Side• 1” Stainless Steel Threaded Bulk Head Fitting in the
Sidewall of Tank - Dispense Side• 2” Polypropylene Threaded Top Mount Fittings (2)• 1”x12” Siphon Tube• 2” Stainless Steel Ball Valves and Nipples (2)• 1”x3/4” Stainless Steel, Barbed Nipple and Ball Valve• DEF Pipe Sealant
VENTING PACKAGE• Duplex Vent Package – Rated for 225 gpm• Duplex Vent Filtration Sock
TANK DIMENSIONS
Tank Size W x H (Tip-up Height) Weight(Gallons) (Inches) (Pounds)
500 48” x 73” (80”) 180 lbs.1,000 65” x 81” (103”) 275 lbs.2,000 87” x 89” (125”) 400 lbs.3,000 95” x 109” (145”) 600 lbs.6,500 119” x 150” (192”) 1,515 lbs.8,400 119” x 188” (223”) 2,135 lbs.
Indoor Storage with Recommended Fitting Package
8
ISO 22241Compatible Materials
of Construction
The AgSpray Indoor Storage Tank with Indoor Dispensing System is a complete indoor diesel exhaust fluid storage and dispensing system. With several tank sizes to choose from, a pump system and filtration unit, this system provides all the DEF compatible components to maintain the purity of your diesel exhaust fluid.All tank fittings and venting components are pre-installed.
COMPONENTS
STORAGE TANK• DEF compatible, single wall, HPDE, vertical storage
tank with non-vented manway – available in 500, 1,000, 2,000, 3,000, 6,500 and 8,400 gallon sizes
FITTING PACKAGE• 2” Stainless Steel Threaded Bulk Head Fitting in the
Sidewall of Tank - Fill Side• 1” Stainless Steel Threaded Bulk Head Fitting in the
Sidewall of Tank - Dispense Side• 2” Polypropylene Threaded Top Mount Fittings (2)• 1”x12” Siphon Tube• 2” Stainless Steel Ball Valves and Nipples (2)• 1”x3/4” Stainless Steel, Barbed Nipple and Ball Valve• DEF Pipe Sealant
VENTING PACKAGE• Duplex Vent Package – Rated for 225 gpm• Duplex Vent Filtration Sock
FILTRATION UNIT• 20’ Reinforced polypropylene filter housing with 1/2”
NPT connections• Includes a 1-micron filter element
DISPENSING SYSTEM• 3/4 HP centrifugal pump with wall mount bracket (also
available in a stainless steel pedestal stand unit)*• 25’ DEF hose on hose reel with stainless steel automatic
shut-off nozzle
TANK DIMENSIONS
Tank Size W x H (Tip-up Height) Weight(Gallons) (Inches) (Pounds)
500 48” x 73” (80”) 180 lbs.1,000 65” x 81” (103”) 275 lbs.2,000 87” x 89” (125”) 400 lbs.3,000 95” x 109” (145”) 600 lbs.6,500 119” x 150” (192”) 1,515 lbs.8,400 119” x 188” (223”) 2,135 lbs.
Indoor Storage with Indoor Dispensing System
* If dispensing system is mounted more than 10’ from storage tank, additional connection hose will be required
9www.AgSpray.com
BULK
ISO 22241Compatible Materials
of Construction
The AgSpray Indoor Storage Tank with Indoor Dispensing System is a complete indoor diesel exhaust fluid storage and dispensing system. With several tank sizes to choose from, a pump system and filtration unit, this system provides all the DEF compatible components to maintain the purity of your diesel exhaust fluid.All tank fittings and venting components are pre-installed.
COMPONENTS
STORAGE TANK• DEF compatible, single wall, HPDE, vertical storage
tank with non-vented manway – available in 500, 1,000, 2,000, 3,000, 6,500 and 8,400 gallon sizes
FITTING PACKAGE• 2” Stainless Steel Threaded Bulk Head Fitting in the
Sidewall of Tank - Fill Side• 1” Stainless Steel Threaded Bulk Head Fitting in the
Sidewall of Tank - Dispense Side• 2” Polypropylene Threaded Top Mount Fittings (2)• 1”x12” Siphon Tube• 2” Stainless Steel Ball Valves and Nipples (2)• 1”x3/4” Stainless Steel, Barbed Nipple and Ball Valve• DEF Pipe Sealant
VENTING PACKAGE• Duplex Vent Package – Rated for 225 gpm• Duplex Vent Filtration Sock
FILTRATION UNIT• 20’ Reinforced polypropylene filter housing with 1/2” NPT connections• Includes a 1-micron filter element
DISPENSING SYSTEM• 3/4 HP centrifugal pump*• Commercial DEF dispenser with industrial grade,
insulated/heated cabinet• 25’ DEF hose on hose reel with stainless steel automatic
shut-off nozzle• Nozzle mounted flow meter (non weights and measures)
TANK DIMENSIONS
Tank Size W x H (Tip-up Height) Weight(Gallons) (Inches) (Pounds)
500 48” x 73” (80”) 180 lbs.1,000 65” x 81” (103”) 275 lbs.2,000 87” x 89” (125”) 400 lbs.3,000 95” x 109” (145”) 600 lbs.6,500 119” x 150” (192”) 1,515 lbs.8,400 119” x 188” (223”) 2,135 lbs.
Indoor Storage with Outdoor Dispensing System
* If dispensing system is mounted more than 10’ from storage tank, additional con-nection hose will be required
10
11
ISO 22241Compatible Materials
of Construction
The AgSpray mini-bulk system is a complete storage system. The AgSpray mini-bulk system was designed to fit directly on a fuel island with the ability to expand as market demands growth. With several fleet and retail dispensing options to choose from, the AgSpray mini-bulk system provides all the DEF compatible components to maintain the purity of your diesel exhaust fluid at a fleet or retail location. All tank fittings and venting components are pre-installed.
COMPONENTS
STORAGE TANK• DEF compatible - 500 or 1,000 gallon capacity• High-level indicator with automated fill-port valve to prevent overfilling• Ability to expand from 500 to 1,000 gallon unit• Forklift pockets with ability to be relocated
FEATURES• Polished stainless steel outer panels and roof for long-term durability• Insulated for hot to cold climates – UV Resistant• High density polyethylene tank(s) with no bottom or side-wall penetrations• Dry-break adapter fill port• Weather-tight control panel mounted on front wall and pre-wired to all Low tank level indicators• 1/2 HP submersible DEF pump(s)• Pre-Piped & wired with electrical components located over 18” XP zone• Functional components and instrumentation• Lockable door for fill-port access• 120V design standard (230V optional upgrade, call for pricing)• Includes a 1-micron filter element
OPTIONS• Heat• Can be set-up for expansion at a later date
TANK DIMENSIONS
Tank Size W x H x L Weight(Gallons) (Inches) (Pounds)
500 36” x 107” x 48” 800 lbs.1,000 36” x 107” x 96” 1,600 lbs.
Mini-Bulk Storage Tank
www.AgSpray.com
AgSpray FLEET DISPENSER
• Hose reel w/ 24’ DEF hose, ball stop & 4-way roller
• Stainless steel automatic nozzle with swivel• Plastic nozzle holder
• Turbine meter with hose adapters
• Pump assembly
• Filter housing & cartridge
• Powder coated carbon steel cabinet
• Foil face insulation lining
• Thermostat with silicone heater
• Slam latch with locking handle user compartment 4-way roller
• Hardware for installation including anchor kit
• Heat • Pulse output
• 1/2 HP flooded suction centrifugal pump
• Mechanical pump seal
• 110 VAC single phase 60Hz motor
• Piston flow meter with mechanical register
• Mechanical ticket printer
• Weights and measures approved
• 1’x10’ suction hose
• 1’x20’ dispense hose
• Higher flow rate systems available
OPTIONAL
30 GPM MECHANICALTRANSFER DOLLY
Each Regional Location Services The AreaCorresponding To The Following Color Codes.
AgSpray REGIONAL LOCATIONS
top related