english version of din en iso 4042 en iso 4042 ics 21.060

ICS 21.060.01; 25.220.40

Verbindungselemente – Galvanische Überzüge (ISO 4042 : 1999)

European Standard EN ISO 4042 : 1999 has the status of a DIN Standard.

A comma is used as the decimal marker.

National forewordThis standard has been published in accordance with a decision taken by CEN/TC 185 to adopt, withoutalteration, International Standard ISO 4042 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Mechanische Verbin-dungselemente (Fasteners Standards Committee), Technical Committee Oberflächenschutz.DIN EN ISO 3269 and DIN EN ISO 15330 *) are the standards corresponding to International StandardsISO 3269 and ISO 15330, respectively, referred to in clause 2 of the EN.

AmendmentsThis standard differs from the October 1999 edition in that a printing error in the German version has beencorrected.

Previous editionsDIN ISO 4042: 1992-06; DIN EN ISO 4042: 1999-10.

National Annex NAStandards referred to(and not included in Normative references, Bibliography and Annex ZA)

DIN EN ISO 3269 Fasteners – Acceptance inspection (ISO 3269 : 2000)DIN EN ISO 15330 Fasteners – Preloading test for the detection of hydrogen embrittlement – Parallel

bearing surface method (ISO/DIS 15330 : 1997) *)

Ref. No. DIN EN ISO 4042 : 2001-01English price group 13 Sales No. 1113

05.01

DEUTSCHE NORM January 2001

EN ISO 4042{

EN comprises 23 pages.

© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

Fasteners – Electroplated coatings(ISO 4042 : 1999)

English version of DIN EN ISO 4042

Supersedes October 1999edition.

*) Currently at draft stage.

English version

ICS 21.060.10

Central Secretariat: rue de Stassart 36, B-1050 Brussels

European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung

Fasteners – Electroplated coatings(ISO 4042 : 1999)

© 1999. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.

Ref. No. EN ISO 4042 : 1999 E

Eléments de fixation – Revêtementsélectrolytiques (ISO 4042 : 1999)

Verbindungselemente – GalvanischeÜberzüge (ISO 4042 : 1999)

This European Standard was approved by CEN on 1999-05-26.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Central Secretariat or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.

ÈÉË

EN ISO 4042

June 1999

Page 2EN ISO 4042 : 1999

ForewordInternational StandardISO 4042 : 1999 Fasteners – Electroplated coatings,which was prepared by ISO/TC 2 ‘Fasteners’ of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 185 ‘Threaded and non-threaded mechanical fasteners and acces-sories’, the Secretariat of which is held by DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by December 1999 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.

Endorsement noticeThe text of the International Standard ISO 4042 : 1999 was approved by CEN as a European Standard withoutany modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).

3

3

4

5

5

5

5

5

6

6

6

7

7

9

9

9

9

9

10

12

14

15

18

20

21

23

Page 3EN ISO 4042 : 1999

Page 4EN ISO 4042 : 1999

Page 5EN ISO 4042 : 1999

Page 6EN ISO 4042 : 1999

Page 7EN ISO 4042 : 1999

Page 8EN ISO 4042 : 1999

Page 9EN ISO 4042 : 1999

Page 10EN ISO 4042 : 1999

Page 11EN ISO 4042 : 1999

Page 12EN ISO 4042 : 1999

Page 13EN ISO 4042 : 1999

Page 14EN ISO 4042 : 1999

Page 15EN ISO 4042 : 1999

Page 16EN ISO 4042 : 1999

Page 17EN ISO 4042 : 1999

Page 18EN ISO 4042 : 1999

Page 19EN ISO 4042 : 1999

Page 20EN ISO 4042 : 1999

Page 21EN ISO 4042 : 1999

Page 22EN ISO 4042 : 1999

Page 23EN ISO 4042 : 1999