expanda stand carousel display system

Expanda StandExpanda Stand Carousel Display SystemCarousel Display System

India Distributor:India Distributor:

Les Expressions Corporate Services Pvt. Ltd.

Flat No.4, 2ND Floor, Sapathagiri Apatments, 83, T.T.K Road, Alwarpet, Chennai – 600 018. Fax: 044-4980832. enquiry@lesexpressions.com

Call Us At : 044-24988823 / 24 / 25 Fax: 044 42088823

Proceed Proceed

for a

Step By Step

Installation

Procedure ...

Carousel Brochure Display System

PackagingPackaging

The Entire System is packed in a BoxThe Entire System is packed in a Box

Closed Box Open Box

ContentsContents

3 – Triangular spinners

2 – Metal pipes (Long& short)

1- Central connecting Hub

3 - Stoppers

1 – Branding Holder

5 - Legs

HubHub

A standard system consists of

A central connecting hub ...

LegsLegs

5 legs to support

the system ...

MetalMetal PipesPipes

Two metal pipes of

different sizes ...

StoppersStoppers

Three stoppers ...

TriangularTriangular SpinnerSpinner

Three spinners …

Branding HolderBranding Holder

And a four way

branding holder top.

Assembling Your Assembling Your Carousel StandCarousel Stand

Connecting the legs to the hub.

Hold the hub and legs

in the inverted position

and insert the leg as

shown...

Connecting the legs to the hub.

Press down to

hear the snap

lock ...

Connecting the legs to the hub.

It should appear as

shown.

Connect the rest in the

same manner ...

Connecting the legs to the hub.

In the same

method connect all

the five legs …

Connecting the legs to the hub

The hub with all 5 legs

assembled ...

Inverted View

Connecting the legs to the hub.

Normal viewThe hub with all 5 legs

assembled ...

Connecting the pipes to the base.

One pipe is shorter

than the other. On

one end of the

shorter pipe there is

a sleeve inside and

one end of the

longer pipe is

tapered

Connecting the pipes to the base.

Insert the longer pipe with

a slight twist into the

sleeve end of the Shorter

pipe … (see the next)Shorter pipe

(Sleeve End)

Longer Pipe

Connecting the pipes to the base.

Longer pipe with one

end tapered …

Insert the tapered

end into the sleeve

ringed pipe

Fixed Pipe With BaseFixed Pipe With Base

Insert the assembled pipes into

the central hub.

Fixing The StopperFixing The Stopper

Insert the stopper ring

through the pipe

Connecting the stopper to the pipe.

Tighten the screw at a

convenient height as

desired by you.

Fixing The Triangular SpinnerFixing The Triangular Spinner

Insert the triangular

spinner (Note: Position

the spinner with stubs

pointing upwards)

through the pipe to rest

on top of the stopper.

Fixing The Triangular Spinner.Fixing The Triangular Spinner.

One Triangular

spinner now rests

where the first stopper

is fixed …

Fixing The Triangular SpinnerFixing The Triangular Spinner

Fix the rest of the spinners in the same manner.

Fixing The Branding HolderFixing The Branding Holder

Fix the branding holder on top end of the pipe.

Branding Holder

this Side Up

Fixing the Brochure HoldersFixing the Brochure Holders

There are two clips in the

Brochure Holders. Press

them gently and insert the

holder in the Triangular

Spinners till you hear the

click sound

Fixing the Brochure Holders.Fixing the Brochure Holders.

Carousel Stand

with One Brochure

Holder fixed on the

top spinner

Adding More Brochure HoldersAdding More Brochure Holders

Keep adding brochure

holders as per your

required combination on

all the three triangular

spinners.

The Fully Assembled CarouselThe Fully Assembled Carousel

Now your carousel is ready for use.