manual for greenhouse strong - dancovershop · 2 technical certificate description greenhouse...

20-03-2018

forGreenhouse

STRONG

Manual

3,0m

2,1m

any length multipple to 2m min 4m

2

TECHNICAL CERTIFICATE

DescriptionGreenhouse STRONG is designed for creation microclimate favorable for growing garden

crops on cottage and household plots. Greenhouse might have variable length depending on customers’ desire. Required length of

greenhouse is provided by purchasing of packages with extending inserts. Each insert add 2m to base length. Base length is 4m. Height of installed frame is 2.1 m

The frame of the greenhouse is made of galvanized iron and is to be assembled with screws and

angles. Complete set includes all that is needed for fastening of coverage. Greenhouse may be completed with coverage on buyer’s request. Greenhouse has two door openings and two small windows in opposite ends.

Greenhouse base requires 3 sheets of cellular polycarbonate 2.1*6m with 4mm thickness. For each Inserts - 1 sheet of cellular polycarbonate 2.1*6m

Perform assembling and operation of the greenhouse in strict accordance with the manual and operating rules stated in the technical certificate. Please keep this technical certificate for further reference.!

Operation rulesBefore the start of operation, the greenhouse should be assembled and installed as prescribed in the manual. When the greenhouse is assembled by a third party the customer should supervise the quality of works to ensure compliance with the present manual. Some detail have extra holes due to uniformity of details. During assembly, be careful not to damage the parts, because until they

a diameter of 4mm or mandrel with a conical end. During assembly of the frame details’ connections

assembly rules and cause of removal warranty support by manufacturer.Do not install the greenhouse too close to buildings or trees where masses of snow/ice can fall on it. Recommended distance is at least 2 m. The greenhouse is designed to withstand wind at the speed below 24 m/sec. The greenhouse cladding should not be removed for the winter period if snow load is limited. If the greenhouse is left unattended for the entire winter the customer should either remove the cladding or estimate the possible snow load. For the frame assembled with all parts including strainers and braces, the maximal snow load begins when the layer of snow weight is 180 kg per 1 sqm of horizontal surface, which corresponds to regulative snow load of IV snow region (in accordance

against snow load in the following areas: Northen areas in Russia, the Scandinavian countries: Finland, Sweden,Norway, Denmark.

3

TECHNICAL CERTIFICATE

The company reserves the right to make changes in the greenhouse design

Warranty liabilities

1. The manufacturer is responsible for the completeness of the product. 2. The manufacturer is responsible for assemblability of the greenhouse in accordance with the instructions.

4. Term for making claims is 24 months from the day of purchase

Terms of warranty provisions

Cleaning and washing sheets of polycarbonate.

Warranty does not apply to cases of:1. Greenhouse installation in violation of instruction requirements 2. Violation of the rules of operation.3. Inappropriate use of the greenhouse.4. Deformation of the greenhouse as a result of ground movement. 5. Floods, hurricanes and other natural disasters.

1. Rinse the sheet with warm water.2. Wash the sheet with a solution of mild soap or with a household detergent and warm water, using a soft rag or a sponge to remove dirt.3. Rinse with cold water and wipe with a soft cloth.

Never use abrasives or highly alkaline cleaning compositions for cleaning polycarbonate sheets. Dry rubbing of the surface will damage the protective layer of the cladding and shorten its shelf life. Never rub the surface of polycarbonate sheets with brushes, metallic cloth or other abrasive materials.

When disinfecting the greenhouse from pathogens causing fungal and bacterial diseases, do not use «sulfur blocks» to avoid frame corrosion (blackening).

4

1 L=0,92 m х4

2 L=0,96 m х12

2в L=0,96 m х6

3 L=0,14 m х4

4н L=1,62 m х2

4в L=1,62 m х4

4вк L=1,62 m х2

4нкп L=1,62 m х2

4нкл L=1,62 m х2

5 L=0,09 m х4

8 L=1,04 х4

9-1 L=0,981 m х4

9-2л L=1,4 m х2

9-2п L=1,4 m х2

10 L=0,82 m х4

11-л L=1,02 m х2

11-п L=1,02 m х2

12д L=0,756 m х8

12ф L=0,320 m х4

13д L=0,713 m х6

13ф L=0,713 m х4

14 L=0,958 m х4

15 L=1,0 m х4

16 L=0,737 m х2

17 L=1,4 m х2

18 L=1,1 m х4

19 L=0,99 m х4

20 L=0,34 m х4

21 L=0,35 m х4

seal loop 3,7 m

seal door 8 m

seal side wall 12 m

5

tubeamplifier х4

bracket х8

hook for doors and windows х4

bracket for the hook х8

loops for doors and windows х8

workpiece for locking (turner with 2 elastic nozzles) х4

тtube bend spinner х1

handle х8

pin х4

screw М4 х 8 х534

screw М4 х 10 х50

screw М4 х 25 х116

screw М4 х 35 х32

self-tapping screw х6

nut М4 х732

washer М4 х144

special wrench х1

adhesive tape х1

1№

4ВК

№4В

К

№4В

№4В

№4В

L=1,05m х4

L=1,0m х4

top bandage х5

bottom bandage х10

bolt М6 х 60 х10

nut М6 х10

washer М6 х20

Double-sided tape L=8,2m

х1

Please see detailed list of parts for Insert on page 27

6

№2В№2В

№2В№2В

№4ВК№2В

№2В

№2В№4В

х4

х4

M4

x8 х2

х2

M4

x8

№2В№2В

№2В№2В

2

3

№2В

№2В

№4В

№2В

№4ВК

№2В

№2В

№2В

№2В

х4

х4

M4

x8

х2

х2

M4

x8

7

№4Н

КП

№4Н

КЛ

№4Н

4

5

№4Н

№4Н

№2

№4Н

КЛ

№2

№2 №4Н

№2

№2

№2

№2 №2№2

№2№2

№4Н

х4

х4

M4

x8

х2

х2

M4

x8

х4

х4

M4

x8

№4В

8

6

7

х10

№2 №2№2№2

№2 №2№2

№2

№1

№1

№3

№3

х3

х3

х1

х1

M4

x8

adhesive tape

screw М4х8

bottom bandage

№1

№3

9

8№

1

№1

№1

№1

№1

№1№

1

№1

№1

№1

№1

№4Н

№2 №2№2

№2

№2 №2№2

№2

9

х4

х4

M4

x8

10

10

№9-

2Л

№11Л

№8 №10

№10

№9-

2

№11Л

№10

№8

№9-

1

№9-

1

№3

№9-1

х2

х2

M4

x8

х4

х4

M4

x8

х4

х4

M4

x8

х2

х2

M4

x8

11

№8

№8

№11П

№4ВК

№4НКП

№11П

№9-

2П

№9-

2

№10

№9-

1

№1

№2

х2

х2

M4

x8

х2

х2

M4

x8

х2

х2

M4

x8

х2

х2

M4

x8

12

11

№18

№18

№19

№18

№19№

1

№19

№17

№17

№21

№2В

№2В

№21

№20

№20

№2

№2 №2

№4Н

№4Н

№4Н

№1

№4В

№4В

х6

х6

M4

x8

х2

х2

M4

x8

х4

х4

M4

x8

13

№17

№18

№18

№19

№19

№19

№18

№2В

№2В

№21

№21

№20

№2

№2№2

№4Н

№4Н

№1

№1

№4Н

№4В

№4В

№20

х6

х6

M4

x8

х2

х2

M4

x8

х4

х4M

4x8

14

12

№2В

№9-

2П

13№4ВК

№4НКП

№4НКП

№4ВК

№4НКЛ

№4НКЛ

№2В

№9-

2Л

х1

х1

M4

x8

х1

х1

M4

x8

х1х1

M4

x8 х1

х1х1

M4

x8 х1х1

M4

x8

х1

х1

M4

x8 х1

х1

х1

M4

x8 х1

х1х1

M4

x8 х1

15

14

N13ф

№13ф №13ф

N12ф№12

ф

№12

ф

N12фN16

№16

N13ф

х2

х2

M4

x8

х4

х4

M4

x8№13д

№13д

№13д

№13д№

12д

№12

д№

12д

№12

д

№12

д№

12д

N15

N15

N14

N14

№15

№15

№15

№15

№15

№15

№14

№14

№14

№14

N13д

N13д

N13д

N12д

N12дN12д

N12д

х2

х2M4

x8

х4

х4

M4

x8

х7

х7

M4

x8

х8

х8M4

x8

х2

х2

M4

x8

х4

х4M4

x8

16

15

L1

L2

Cellular polycarbonate shall be installed strictly defined side out (towards the sun), which has a protective layer. The protective layer is usually at the side with the inscriptions on the transport film. The film on the other side of sheet is transparent. After marking the sheet, but prior to its cutting, make a mark on the protected side of the sheet for each piece: after removal of the transport film sheet sides are not visually different. The transport film is stripped from both sides immediately before fixing the cladding on the frame.

Sections of polycarbonate with open honeycombs should be covered by adhesive tape.

16

2095

80

5

1480

21

00

6000

330

20

95

2100

L1=L2!

17

17

х1 х2

х1

х2

х1 M4

x10

х2

№5

х4

х4

M4x

10

M4

x25

х17х17

х17

20..25мм

х1

х1

M4

x25

х1

х1

18

18

№5

х2

х1 M4

x10

х2

х2

х1 M4

x10

х2

х4

M4

x10

х4

х1

х1

M4

x25 х1

20..25мм

M4

x25

х7х7

х7

х1 х2

х1

х1

19

19

№9

х1

M4

x25 х1

х1

х1 х1

х1 х1

х1 х1 M

4x10

х1

х1

х1

M4

x25

х15 х15

х15

M4

x35 х16

х16

х16

20

5,15м

№9-

2

№12

д№

5

х1 х1

х2

20

21

№9

х2

M4

x10 х2

2х6м

21

222

12000

2000

10

00

10

54

21

00

х1

х2L=1,05м

Double-sided tape

The arrow on the details is directed to the front side greenhouse

Cellular polycarbonate shall be installed strictly defined side out (towards the sun), which has a protective layer. The protective layer is usually at the side with the inscriptions on the transport film. The film on the other side of sheet is transparent. After marking the sheet, but prior to its cutting, make a mark on the protected side of the sheet for each piece: after removal of the transport film sheet sides are not visually different. The transport film is stripped from both sides immediately before fixing the cladding on the frame.

Sections of polycarbonate with open honeycombs should be covered by adhesive tape.

22

24

23

х16

M4

x25

х16

!Do not fully tighten!

х1

1054

23

25

х2

х2

M4

x25

х2

26

M6

x60 M

6

х1

х2

х1х1

24

27

х1

х3

M4

x25

х3

1 m

1000

25

28

26

866

40

60

10

00

10

00

10

00

10

00

2988

FOR INSTALLING ON FUNDAMENT

1061

А

Б

60

60

21

21А

Б

А

1 L=0,92 m х4

2 L=0,96 m х12

2в L=0,96 m х6

3 L=0,14 m х4

4н L=1,62 m х2

4в L=1,62 m х4

17 L=1,4 m х2

18 L=1,1 m х4

19 L=0,99 m х4

20 L=0,34 m х4

21 L=0,35 m х4

L=1,0m х4

Detailed list of parts for Insert

27

Contact information

Head office:Dancover A/SNordre Strandvej 119 G3150 HellebækDenmark

For more informationplease visit:www.dancovershop.com

National contact

Denmark: 70 26 76 20denmark@dancover.com

UK: 020 8099 7570uk@dancover.com

Spain: 911 436 828espana@dancover.com

Italy: 02 479 21 198italia@dancover.com

Germany: 041 0266 7040germany@dancover.com

Switzerland: 0840 000125schweiz@dancover.com

France: 0975 181 800france@dancover.com

Austria: 0662 626935austria@dancover.com

Sweden: 040 233 262sverige@dancover.com

Finland: 0 931 581 720suomi@dancover.com

Nederland: 0 858 880 524nederland@dancover.com

Poland: 22 300 8602polska@dancover.com

Ireland: 0 151 33 003ireland@dancover.com

Luxembourg: +49 041 0266 7040luxembourg@dancover.com

Portugal: 308 800 899portugal@dancover.com

Belgium: 0 28 08 08 09belgique@dancover.com

Norway: 231 00 690norge@dancover.com