may 1st 2017 - mke ind · despit l h ar ake h reparatio hi rochure mke distribution/mke a o el...
Post on 07-May-2018
217 Views
Preview:
TRANSCRIPT
[ MAY 1st 2017 ]
COMPANY PROFILE
Competition is creating new challenges in an increasingly globalized market. This is why MKE Industries presents its importation line called Distribution MKE.
MKE imports equipment to offer restaurant operators the possibility of acquiring attractively priced professional kitchen equipment.
MKE’s manufacturing expertise ensures that imported goods meet industry expectations in terms of price and quality.
MKE Industries remains the only Canadian company to design and build quality kitchen equipment in the three niche markets : cooking, refrigeration and custom manufacturing.
To be well informed and make the choices that suit you best, do not hesitate to refer to your representative or customer service.
3
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors.
* The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
Model Door(s) Shelves Capacity Width Depth Height HP List Price
IMK-RI-23G 1 swing door 4 23 cu. ft. 26 7/8” 32” 79 1/2” 1/4 $ 2,540
IMK-RI-352SD 2 sliding doors 8 35 cu. ft. 44 1/2” 28 5/16” 81 1/2” 1/3 $ 2,790
IMK-RI-422SD 2 sliding doors 8 42 cu. ft. 52 3/8” 28 5/16” 81 1/2” 1/3 $ 3 ,060
IMK-RI-23G IMK-RI-352SD IMK-RI-422SD
GLASS DOOR REFRIGERATORS
Certified to ANSI/NSF 7 standards
Low-e double pane glass doors
INTERIOR : white aluminum interior liner with stainless steel floor
EXTERIOR : white steel and plastic top sign panel with lamp
self-closing door(s)
Electronic thermostat and digital LED temperature display for accurate control and easy reading
Magnetic gasket can be replaced without any tools
CFC free refrigerant and foam
R134a refrigerant
4” casters included with, locks provided on front set for model IMK-RI-352SD and IMK-RI-422SD
Frame rail fitted with appliance rollers and front standard ajustable legs for model IMK-RI-23G
4
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors. * The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
Model Type Door(s) Shelves Capacity Width Depth Height HP List Price
IMK-RI-23SSE Refrigerator 1 3 23 cu. ft. 26 7/8” 32 3/4” 82 7/8” 1/4 $ 3,330
IMK-RI-49SSE Refrigerator 2 6 49 cu. ft. 54” 32 3/4” 82 7/8” 1/3 $ 4,195
IMK-RIF-23SSE Freezer 1 3 23 cu. ft. 26 7/8” 32 3/4” 82 7/8” 3/4 $ 3,730
IMK-RIF-49SSE Freezer 2 6 49 cu. ft. 54” 32 3/4” 82 7/8” 1 $ 5,295
IMK-RI-23SSEIMK-RIF-23SSE
IMK-RI-49SSEIMK-RIF-49SSE
STAINLESS STEEL REFRIGERATORS AND FREEZERS
EXTERIOR : stainless steel doors, front and sides
INTERIOR : stainless steel side walls, back, floor, door liner and ceiling
Self-closing door(s)
Electronic thermostat and digital LED temperature display for accurate control and easy reading
Heating element concealed in door frame to eliminate condensation
Magnetic gasket can be replaced without any tools
CFC free refrigerant and foam
4” casters included, with locks provided on front set
Certified to ANSI/NSF 7 standards
5
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors.
* The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
Certified to ANSI/NSF 7 standards
Model Door(s) Shelves Capacity Pans Width Depth Height HP List Price
IMK-PT-47 1 1 12 cu. ft. 1/3 x 6 47 1/2” 32 3/8” 41 3/8” 1/3 $ 3,590
IMK-PT-70 2 2 22 cu. ft. 1/3 x 9 70 7/8” 32 3/8” 41 3/8” 1/3 $ 4,690
IMK-PT-94 3 3 32 cu. ft. 1/3 x 12 94 1/4” 32 3/8” 41 3/8” 1/2 $ 7,350
PIZZAPREP TABLES
IMK-PT-94
Stainless steel framework, white aluminum interior liner and stainless steel floor
Electronic thermostat and digital LED temperature display for accurate control and easy reading
Auto defrosting and auto evaporation of condensation water
Magnetic gasket can be replaced without any tools
CFC free refrigerant and foam
Polycarbonate plastic pans and white polyethylene cutting board are included
4” casters included, with locks provided on front set
IMK-PT-47 IMK-PT-70
6
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors. * The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
Model Door(s) Shelves Capacity Pans Width Depth Height HP List Price
IMK-ST-27 1 1 7 cu. ft. 1/6 x 8 28 7/8” 30” 43 1/4” 1/4 $ 2,295
IMK-ST-48 2 2 12 cu. ft. 1/6 x 12 48 1/4” 30” 43 1/4” 1/3 $ 3,460
IMK-ST-61 2 2 15,5 cu. ft. 1/6 x 16 61 1/4” 30” 43 1/4” 1/3 $ 3,995
IMK-ST-72 3 3 18 cu. ft. 1/6 x 18 71 3/4” 30” 43 1/4” 1/3 $ 4,610
IMK-ST-27 IMK-ST-72
SALAD / SANDWICH PREP TABLES
IMK-ST-61IMK-ST-48
Stainless steel framework, white aluminum interior liner and stainless steel floor
Electronic thermostat and digital LED temperature display for accurate control and easy reading
Auto defrosting and auto evaporation of condensation water
Magnetic gasket can be replaced without any tools
CFC free refrigerant and foam
Polycarbonate plastic pans and white polyethylene cutting board are included
2 1/2” casters included, with locks provided on front set
Certified to ANSI/NSF 7 standards
7
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors.
* The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
Certified to ANSI/NSF 7 standards
IMK-LB-27
IMK-LB-48IMK-LB-61
IMK-LB-72
REFRIGERATEDUTILITY COUNTERS
Model Door(s) Shelves Capacity Width Depth Height HP List Price
IMK-LB-27 1 1 6,5 cu. ft. 27 7/8” 30” 35 1/2” 1/4 $ 2,025
IMK-LB-48 2 2 12 cu. ft. 48 1/4” 30” 35 1/2” 1/4 $ 2,450
IMK-LB-61 2 2 15,5 cu. ft. 61 1/4” 30” 35 1/2” 1/4 $ 2,685
IMK-LB-72 3 3 18 cu. ft. 71 3/4” 30” 35 1/2” 1/4 $ 3,180
Stainless steel framework, white aluminum interior liner and stainless steel floor
Electronic thermostat and digital LED temperature display for accurate control and easy reading
Auto defrosting and auto evaporation of condensation water
Magnetic gasket can be replaced without any tools
CFC free refrigerant and foam
2 1/2” casters included, with locks provided on front set
8
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors. * The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
Model Shelves Width Depth Height HP List Price
IMK-GG-52 4 51 5/8” 31” 78 3/4” 1.5 $ 8, 150
IMK-GG-77 4 76 1/4” 31” 78 3/4” 1.5 $ 11, 640
VERTICAL AIR CURTAINS
EXTERIOR : 304 Stainless steel with glass ends for greater product visibility
Electronic thermostat and digital temperature display for accurate control and easy reading
Adjustable shelving with LED lighting on all shelves
Automatic defrosting
CFC free refrigerant and foam
Night curtain included
Evaporator failure included
IMK-GG-77
Certified to ANSI/NSF 7 standards
9
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors.
* The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
WORK TABLES
STAINLESS STEEL WALL
SHELVES
S/S top 18 ga. type 430 stainless steel, brushed finished
Reinforced with three “U’’ channels
Galvanized steel undershelf
Galvanized steel tubular legs with adjustable bullet feet
Height 34”
Model Dimensions List Price
ECTC-2424PS 24” x 24” $ 178
ECTC-3024PS 24” x 30” $ 203
ECTC-3030PS 30” x 30” $ 220
ECTC-3624PS 36” x 24” $ 230
ECTC-3630PS 36” x 30” $ 245
Model Dimensions List Price
ECTC-4824PS 48” x 24” $ 274
ECTC-4830PS 48” x 30” $ 286
ECTC-6024PS 60” x 24” $ 324
ECTC-6030PS 60” x 30” $ 348
Model Dimensions List Price
ECTC-7224PS 72” x 24” $ 365
ECTC-7230PS 72” x 30” $ 405
ECTC-8430PS 84” x 30” $ 499
ECTC-9630PS 96” x 30” $ 545
Model Dimensions List Price
WMS-1224 12” x 24” $ 75
WMS-1236 12” x 36” $ 92
WMS-1248 12” x 48” $ 95
Model Dimensions List Price
WMS-1260 12” x 60” $ 118
WMS-1272 12” x 72” $ 132
Model Dimensions List Price
WMS-1284 12” x 84” $ 165
WMS-1296 12” x 96” $ 198
ECTC-3624PS
WMS-1236
Certified to ANSI/NSF 7 standards
10
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors. * The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
WORKTABLE WITH BACKSPLASH
Model Dimensions List Price
ECTCB-3630 36” x 30” $ 265
ECTCB-4830 48” x 30” $ 315
Model Dimensions List Price
ECTCB-6030 60” x 30” $ 375
ECTCB-7230 72” x 30” $ 430
Model Dimensions List Price
ECTCB-8430 84” x 30” $ 495
ECTCB-9630 96” x 30” $ 540
S/S top type 430 stainless steel, brushed finished
Reinforced with three “U” channels
Galvanized steel undershelf and tubular legs with adjustable bullet feet
4” backsplash
Height 34”
ECTCB-6030
Certified to ANSI/NSF 7 standards
11
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors.
* The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
EQUIPMENT FILLER TABLE
SINGLE OVERSHELF
DOUBLE OVERSHELF
Model Dimensions List Price
ESTAN-2424 24” x 24” $ 250
ESTAN-3624 36” x 24” $ 280
Model Dimensions List Price
ESTAN-2430 24” x 30” $ 275
ESTAN-3630 36” x 30” $ 335
Model Dimensions List Price
ESTAN-4830 48” x 30” $ 390
Model Dimensions List Price
HSSC-4812 48” x 12” $ 140
HSSC-6012 60” x 12” $ 150
HSSC-7212 72” x 12” $ 170
Model Dimensions List Price
HSDC-4812 48” x 12” $ 275
HSDC-6012 60” x 12” $ 295
HSDC-7212 72” x 12” $ 315
S/S top type 430 stainless steel, brushed finished
Galvanized steel undershelf and tubular legs with adjustable bullet feet
Made in 430 stainless steel type 18 ga.
Made in 430 stainless steel type 18 ga.
ESTAN-3624
HSSC-6012 HSDC-6012
Certified to ANSI/NSF 7 standards
12
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors. * The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
MICROWAVE SHELF
DRAINBRASKET
Model Dimensions List Price
MSC4-1824 18” x 24” $ 120
Model Dimensions List Price
MSC4-2424 24” x 24” $ 140
Model Dimensions List Price
DBC 20” x 20” $ 450
Made in 304 stainless steel grade.
Certified to ANSI/NSF 7 standards
MSC4-1818
DBC
13
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors.
* The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
CLEAN DISH TABLE
SOLIED DISH TABLE
Model Dimensions List Price
TLEC-3630L 36” x 30” $ 555
TLEC-3630R 36” x 30” $ 555
TLEC-4830L 48” x 30” $ 650
Model Dimensions List Price
TLEC-4830R 48” x 30” $ 650
TLEC-6030L 60” x 30” $ 755
TLEC-6030R 60” x 30” $ 755
Model Dimensions List Price
TLEC-7230L 72” x 30” $ 840
TLEC-7230R 72” x 30” $ 840
Model Dimensions List Price
TLC-3630L 36” x 30” $ 435
TLC-3630R 36” x 30” $ 435
TLC-4830L 48” x 30” $ 515
Model Dimensions List Price
TLC-4830R 48” x 30” $ 515
TLC-6030L 60” x 30” $ 590
TLC-6030R 60” x 30” $ 590
Model Dimensions List Price
TLC-7230L 72” x 30” $ 640
TLC-7230R 72” x 30” $ 640
Made in 304 stainless steel grade, 18 ga.
Made in 304 stainless steel grade, 18 ga.
Certified to ANSI/NSF 7 standards
TLC-3630L
TLEC-3630R
14
Taxes are not included. Prices may change without notice. Despite all the care taken in the preparation of this brochure, MKE Distribution/MKE can not be held responsible for technical and typographical errors. * The warranty programs and conditions of sale described on page 15 apply exclusively to MKE Distribution.
Model
Description
Dimension (Overall) L” x D” x H”
Weight (lbs)
Gauge
List Price
SEHS-17 14’’ x 10’’ x 5’’ Wall mount hand sink (faucet included) 17’’ x 15’’ x 13 1/4’’ 11 20 $ 180
PSC-18 18’’ x 18’’ 1 Tub sink, 16 1/2’’ deep, no drainboard 21’’ x 21 1/2’’ x 44 1/2’’ 34 18 $ 450
PSC-24 24’’ x 24’’ 1 Tub sink, 14’’ deep, no drainboard 27’’ x 27 1/2’’ x 44 1/2’’ 48 16 $ 565
PSC-24LD24 24’’ x 24’’ 1 Tub sink, 14’’ deep, left drainboard 51’’ x 30’’ x 44 1/2’’ 68 16 $ 725
PSC-24RD24 24’’ x 24’’ 1 Tub sink, 14’’ deep, 24’’ right drainboard 51’’ x 30’’ x 44 1/2’’ 68 16 $ 725
PSC-36 18’’ x 18’’ 2 Tub sinks, 13’’ deep, no drainboard 42’’ x 24’’ x 44 1/2’’ 60 18 $ 735
PSC-36LD18 18’’ x 18’’ 2 Tub sinks, 11’’ deep, 18’’ left drainboard 57’’ x 24’’ x 44 1/2’’ 67 18 $ 790
PSC-36RD18 18’’ x 18’’ 2 Tub sinks, 11’’ deep, 18’’ right drainboard 57’’ x 24’’ x 44 1/2’’ 67 18 $ 790
PSC-36DD18 18’’ x 18’’ 2 Tub sinks, 11’’ deep, 18’’ double drainboard 72’’ x 24’’ x 44 1/2’’ 80 18 $ 790
PSC-36DD24 18’’ x 18’’ 2 Tub sinks, 14’’ deep,, 24’’ double drainboard 84’’ x 24’’ x 44 1/2’’ 87 18 $ 825
PSC-48 24’’ x 24’’ 2 Tub sinks, 14’’ deep, no drainboard 54’’ x 30’’ x 44 1/2’’ 92 16 $ 1,035
PSC-48LD24 24’’ x 24’’ 2 Tub sinks, 14’’ deep, 24’’ left drainboard 75’’ x 30’’ x 44 1/2’’ 118 16 $ 1,090
PSC-48RD24 24’’ x 24’’ 2 Tub sinks, 14’’ deep, 24’’ right drainboard 75’’ x 30’’ x 44 1/2’’ 118 16 $ 1,090
PSC-48DD24 24’’ x 24’’ 2 Tub sinks, 14’’ deep, 24’’ double drainboard 96’’ x 30’’ x 44 1/2’’ 132 16 $ 1,090
PSC-54 18’’ x 18’’ 3 Tub sinks, 14’’ deep, no drainboard 60’’ x 24’’ x 44 1/2’’ 80 18 $ 990
PSC-54LD18 18’’ x 18’’ 3 Tub sinks, 12’’ deep, 18’’ left drainboard 75’’ x 24’’ x 44 1/2’’ 85 18 $ 1,160
PSC-54RD18 18’’ x 18’’ 3 Tub sinks, 12’’ deep, 18’’ right drainboard 75’’ x 24’’ x 44 1/2’’ 85 18 $ 1,160
PSC-54DD18 18’’ x 18’’ 3 Tub sinks, 12’’ deep, 18’’ double drainboard 90’’ x 24’’ x 44 1/2’’ 90 18 $ 1,160
PSC-72 24’’ x 24’’ 3 Tub sinks, 14’’ deep, no drainboard 78’’ x 30’’ x 44 1/2’’ 128 16 $ 1,160
ECONOMICPOT SINKS
Entirely fabricated in 16-18 ga. type 304 stainless steel, brushed finished, welded and polished
Corner drains with overflow pipe and strainer
Bowls fabricated with coved corners
Galvanized steel tubular legs with adjustable bullet feet
Certified to ANSI/NSF 7 standards
1515
MKE DISTRIBUTION WARRANTY PROGRAMREFRIGERATED EQUIPMENT LIMITED ONE-YEAR PARTS AND LABOR WARRANTY – IMK SERIES MKE Distribution warrants this product is free from defects in material and workmanship, under normal use and service, for a period of one (1) year from the date of shipment from MKE Distribution warehouse. During this one year warranty period, MKE Distribution shall or, at MKE Distribution’s option, replace parts determined by MKE Distribution to be defective in material or workmanship and/or will reimburse labor costs according to the conditions and rates established by MKE. Any warranty service request should first be directed to MKE Distribution customer service that will validate the warranty, issue a pre-authorization and coordinate the service call. Note that the 7-digit serial number that appears on the unit must be legible and unaltered and match the one on your original invoice copy to be provided.Warranty does not cover standard wear parts which include door gaskets, incandescent bulbs or fluorescent bulbs, glass components.Warranty does not cover issues caused by improper installation or lack of basic preventative maintenance which includes regular cleaning of condenser coils, blades of the fan or any issue relevant to an obstruction of the air inlet to compressor. Condenser requires scheduled cleaning at least every thirty days. A dirty condenser can result in non-warranted parts and compressor failures. Do not obstruct the air intake in front of the compressor panel.Drier replacement is very important and must be changed when a system is opened for servicing. The new drier must be the same capacity as the drier being replaced. Never use an extension cord: MKE Distribution will not warranty any unit that has been connected to an extension cord. The warranty does not cover improper or unstable voltage.
IMK-GGLIMITED ONE-YEAR PARTS AND LABOR WARRANTY - MK-GG-52, IMK-GG-57 In addition to the warranty conditions of the refrigeration equipment, the SERIE IMK-GG refrigerator has certain restrictions: The Grab N Go (GG serie) refrigerator AIR CURTAIN UNIT recommends operating conditions, namely an environment not exceeding 75dF (23dC) and 55% humidity, not installed in direct sunlight or near doorway or near fans or improper clearance for air flow. Air flow requires a 4’’ clearance at rear, and 12’’ above. This IMK-GG refrigerator should be connected to an individual branch circuit. A dirty condenser can result in non-warranted parts and compressor failures. All recommendations of the manufacturer must be respected or the warranty will be void. Warranty does not cover issues caused by improper installation, misuse or lack of basic preventative maintenance.
TABLES, SHELVES, POT SINK AND UTILITIES EQUIPMENT LIMITED ONE-YEAR PARTS AND LABOR WARRANTY MKE Distribution warrants this product to be free from defects in material and workmanship, under normal use and maintenance, for a period of one (1) year from the date of shipment from MKE Distribution warehouse. During this one year warranty period, MKE Distribution shall or, at MKE Distribution’s option, replace parts determined by MKE Distribution to be defective in material or workmanship and/or will reimburse labor costs according to the conditions and rates established by MKE Distribution. Any warranty service request should first be directed to MKE Distribution customer service that will validate the warranty, issue a pre-authorization and coordinate the service call. Note that the 7-digit serial number that appears on the unit must be legible and unaltered and match the one on your original invoice copy to be provided.
THE WARRANTY DOES NOT COVERED: • Service calls that are not related to a manufacturing defect of faulty material;• Service calls to check the installation of the device or for instructions on its use;• Service calls resulting from improper usage or installation or adjustment or failure
to clean and/or maintain product as per recommendation of the manufacturer;• Service calls not authorized by MKE Distribution (without first having obtained a
pre-authorization number’s);• Damage caused by substandard repairs, or repairs made by unauthorized
technicians; • Standard wear parts which include door gaskets, incandescent bulbs or
fluorescent bulbs, glass components, knob, ring, pyrorock plate and similar; • Use of non MKE Distribution parts without their approval or alteration of the
original equipment will void warranty;• MKE Distribution is not responsible for the repair or replacement of failed or
damaged components resulting from incorrect supply voltage, the use of extension cords, low voltage, or unstable supply voltage;
• Costs for the repair or replacement of defective parts related to gas lines, leaks, recharging of refrigerant that could be due to damage during transport or handling;
• Economic loss, profit loss, or special indirect or consequential damages, including without limitation, losses or damages arising from food or product spoilage claims whether or not on account of refrigeration failure
• Costs related to making the appliance accessible for repair, for example, removing add-ons that were not part of the appliance when it originally left the factory;
• Additional costs such as for delays caused by the customer and beyond the control of the authorized service company MKE Distribution or MKE Distribution;
• Additional costs, including but not limited to service calls outside of the repair technician’s normal working hours, weekends, holidays, tolls and charges, travelling costs beyond a 40 km-radius of an authorized MKE Distribution service company, tolls, charged to reach isolated location without being annually accessible by road;
• Damage caused during freight or handling after shipment from MKE Distribution warehouse;
• Alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, fold, acts of God.
• STAINLESS STEEL. Stainless steel surfaces react with aggressive agents. Surfaces should be maintained and dried immediately after use, using only a soft cloth and soap-free (limestone-free) water, or a cleaner specifically designed for stainless steel. High-chloride cleaners, caustic solutions, abrasive steel-fiber cleaners, deposits of high-acid or chloride-containing foods, items left behind can lead to the appearance of corrosion. Also the engravings in depth contained the protective layer of the property of the stainless steel and favor the appearance of rust. Since the maintenance, use and environment in which the unit is operated are factors beyond the control of MKE Distribution, corrosion of metal and stainless
steel and the appearance of rust are not covered by this guarantee.
WOODEN WORKTOPIt is a natural material and not passive in a area with high humidity. It is also important to prevent the surface from being in contact with excess water or liquid. The wooden worktop should be cleaned with a soft cloth lightly soaked with soapy water. When completely dried, it must be regularly covered with a coating of vegetable oil to seal it against humidity. Since maintenance and environmental moisture levels are factors beyond the control of MKE Distribution, alteration, deformation, and detachment of wood surfaces are not covered by this warranty;Before placing a service call, it is the responsibility of the customer to ensure that the problem does not arise from improper installation or energy supply, improper adjustment or use, because in all these cases are not covered by this Limited Warranty and the sole and exclusive responsibility of the customer.
EXCLUSIONS :• This warranty is not assignable and applies only in favor of the original purchaser/
user to who delivered originally. Any such assignment or transfer shall void the warranties herein made and shall void all warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose.
• Removal or defacement of the original serial number or model number form any unit shall be deemed to release MKE Distribution from all obligations hereunder or any other obligations, express or implied.
• MKE Distribution is not responsible for the repair or replacement of any part that MKE determines have been subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident damage during transit or installation, fire, flood, or act of God.
• Equipment installed in mobile units.• Equipment damaged by causes beyond the control of MKE Distribution/MKE
including, but not limited to, transport, fire, flooding, power supply changes, unauthorized third party repair MKE Distribution/MKE, vandalism, labor dispute, disaster or act of God.
• Non-commercial use: MKE Distribution/MKE assumes no liability and will not warranty any equipment for parts or labor coverage for component failure, factory defect or any other damages for units installed in non–commercial foodservice or residential applications.
• MKE Distribution/MKE are not responsible for the cost to move equipment for any reason form its position of operation on the customer’s premises to make a warranty repair.
• Devices sold “as is” are not covered by any warranty.• MKE Distribution/MKE are not responsible for economic loss, profit loss, or
special indirect or consequential damages, including without limitation, losses or damages arising from food or product spoilage claims whether or not on account of refrigeration failure or due to MKE Distribution/MKE’s inability to deploy a service company or an employee, or act of God.
• MKE Distribution/MKEis will not warranty any equipment that has been connected to an extension cord, if connected to a modified or damaged power supply cords.
• LIMITATIONS OF LIABILITY• The above constitutes MKE Distribution/MKE’s sole and unique obligation
under the terms of the present Limited Warranty, with regard to equipment, products and services. Regarding equipment, material, parts and accessories manufactured by third parties used or not in the manufacturing process, MKE Distribution/MKE ’s sole obligation shall be to endeavour to obtain full indemnity corresponding to the manufacturer’s warranty. MKE Distribution/MKEassumes no responsibility, whether in contract, criminal, negligence or other manner, with regard to parts manufactured by third parties.
• The preceding paragraphs outline the exclusive remedy for all claims based on a breakdown or defect of the products and services sold here, whether the breakdown or defect appears before or during the warranty period and a claim, while instituted, is based on a contract, indemnity, warranty, criminal (including negligence), strict liability, implied status, Common Law or other, therefore MKE Distribution/MKE, theirs employees, representatives, agents, administrators and owner shall not be held liable for claims made against bodily harm or damages of any kind. All responsibility shall automatically end upon the warranty period expiration date.
• The foregoing warranties are exclusive and in lieu of all other warranties, whether oral of written, implied or statutory. No implied warranty of merchantability or fitness for a particular purpose shall apply. MKE Distribution/MKE do not warrant products, components or services of third parties.
• MKE Distribution/MKE shall not be liable in any manner for any default or delay in performance hereunder caused by or resulting from any contingency beyond MKE Distribution/MKE’s control, including, but not limited to governmental restrictions or restraints, freight, strike, lockouts, injunctions, fire, food, acts of God, short or reduced supply of raw materials, or discontinuance of the parts by the original part manufacturer.
• There are no other warranties, express, implied or statutory, except as set forth on pages 52 to 56 of this effective document dated April 15, 2017, for any device purchased as of that date which takes precedence over Any other document, including any MKE Distribution/MKE information circulating freely. These warranties are exclusive in lieu of any other warranty. There is no warranty that exceeds the description herein.
• There is no liability of MKE Distribution/MKE for any material, bodily injury, risks and dangers incurred by a user who does not have the skills, judgment, ability and knowledge to safely use / operate a MKE Distribution manufacturing equipment, including for the risk of death.
• There is no liability of MKE for the alteration or absence of the instruction and data sheets affixed to an appliance after it has been shipped from the MKE Distribution warehouse.
• MKE Distribution/MKE sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional limitations of the present.
• This warranty does not assume or authorizes any person to assume any obligations other than those expressly covered by this warranty.
• Outside Canada : this warranty does not apply to, and MKE Distribution/MKE are not responsible for, any warranty claims made on products sold or used outside Canada. This warranty only applies to units shipped from MKE Distribution’s warehouse facilities after April 15, 2017.
COMMERCIAL USE ONLYMKE Distribution/MKE assume no liability and will not warranty any equipment for parts or labor coverage for component failure, factory defect or any other damages for units installed in non–commercial foodservice or residential applications. HOW TO PROCEED It is the client’s responsibility to ensure the problem does not stem from improper installation, adjustment or use, given that in all these cases any expenses incurred shall not be covered by the Limited Warranty, and shall be the customer’s sole responsibility.The client, the original-purchaser, shall obtain an pre-authorization reference number from MKE Distribution Customers Services before processing or making arrangements for a repair; if their condition in not respected, MKE Distribution/MKE reserve the right to reduce all claims.
HOW TO OBTAIN WARRANTY SERVICE 1- Make a request on-line, by fax or telephone, in order to inform MKE Distribution
about the equipment, the nature of the problem and provide proof of purchase and date of installation;
2- MKE Distribution will verify whether the warranty period is still in effect;3- MKE Distribution will provide an authorization number and the coordinates
of an authorised service representative in your area so that you can make the necessary arrangements to schedule a repair:
4- This authorization shall be provided subject to all conditions being met and the nature of the defect falling under the responsibility of MKE Distribution, at their sole discretion;
5- The defective parts, proof of purchase and installation date, and the repair invoice bearing the customer’s signature must be forward postage prepaid to Customers Services;
6- The customer shall deal with the service agent in its region authorized by MKE Distribution;
7- The customer shall cooperate with the authorized MKE Distribution service agent to ensure that the repair can be made during the agent’s normal business hours.
8- The customer shall return the defective parts within 30 days following the repair date: otherwise the claim shall be rejected.
GOVERNING LAWFor equipment, products and services sold in Canada, the present Limited Warranty shall be governed by the laws in effect in the province of Québec, Canada. The United Nations Convention on contracts for the International. Sale of Goods is herby excluded in its entirely form application to this Limited Warranty.
CONDITIONS OF SALE• This price list supersedes all previous price lists; • Programs and taxes in effect at the time of shipping;• Prices: Canadian dollars, before taxes and subject to change without notice;• COD or net 30 days – contact our credit department for more details;• Invoices are payable to our Canadian office at the MKE Distribution current
exchange rate;• All claims regarding invoices must be presented within 10 days from the original
date of shipment;• Deductions for service repairs, promotional activities approved by MKE cannot
be deducted from invoice payments. MKE Distribution will issue a check or a credit note to pay for the financed activity.
A 24% per annum interest will be charged on al overdue accounts on a monthly basis. Furthermore, purchases will not entitle to any remittance. Unless otherwise specified, all account are payable immediately, without MKE Distribution/MKE having to undertake any measure, in the event of an (i) insolvency procedure, sequestration or bankruptcy regarding a distributor of the distributor r (ii) a transfer of more than 20% of the holding of a distributor, including a merger or a regrouping of companies; o(iii) the liquidation or the suspension of normal activities or un distributor; or (iv) activities of the distributor in MKE Distribution/MKE’s opinion, affect negatively the normal course of activities of the distributor.MKE will not be held responsible for a delay in the delivery of an order. All additional accessories and parts listed in the price list are considered as repair parts unless the have been ordered with the original equipment.
RETURN OF EQUIPMENT STANDARD EQUIPMENT: Any request for return must be made in writing to the Customer Service Department within 10 days of the original date of expedition. The MKE Distribution Customer Service will issue an authorization number accompanied by the conditions of return including the return of the equipment paid by the customer, returned in the original packaging, new, complete with its accessories and free from any damage, and subject to a 25% return fee. All cost incurred for reconditioning will be deducted from the net credit to be issue. AFTER 10 DAYS: No return.
ORDER CANCELLATION STANDARD EQUIPMENT AND REGULAR ORDER:25% administration fees shall apply to any order cancellation of standard equipment.
SPECIAL ORDERS:When the order is being processed, no cancellation will be allowed and there is a 100% cancellation fee and will be invoiced to the customer.
183 Montcalm Blvd North Candiac (QC) Canada J5R 3L6
Tel. : 450 659-6531 or 1 800 361-9801 | Fax : 450 659-2248
www.mke-ind.com | info@mke-ind.com
Réf.
03/2
017
Made in Canada
M.K.E. INDUSTRIES (1984) INC.
top related