msds & packing
Post on 30-Mar-2016
429 Views
Preview:
DESCRIPTION
TRANSCRIPT
Lijiamei Taiwan., Co. Ltd TEl:+8862-89197626 Fax:+886-89117810 Chen Kuo Rd., No. 5, Hsin Tien City, Taipei, R.O.C
MINERAL COMPOSITE BOARD
100% Ecofriendly and Carbon Reduction
MSDS&
PACKING
Mineral Composed Board
MSDS No. MCB-20111003Page 1 of 7 MCB (Mineral Composite Board)
MSDS No. MCB-20111003
SECTION 1: COMPANY INFORMATIONLijiamei Taiwan Co., Ltd4F., No.5, Jianguo Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Phone: +886-289117810 Fax: +886-289197626Website: www.mcboard.netEmail: eco@mcboard.netUse: Exterior: outdoor table top, siding tile, ceiling board, fence. Interior: wallboard, underlayment, flooring substrate. MSIP: Mineral Structural Insulated Panels with EPS, XPS or Wood core
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
Product Name/Trade Names: MCB Board
Ingredient Cas No. Hazard Class Propertion Magnesium Polymer 1309-48-4 None ≒ 47% Water of crystallization N/A None ≒ 3% Cellulose 9004-34-6 None ≒ 20% Sic 92843-12-4 None ≒ 21% Proprietary Additives N/A None ≒ 4% Fiberglass scrim 65997-17-3 None ≒ 1%
SECTION 3: HAZARDS IDENTIFICATIONEmergency Overview: Non-toxic, asbestos, formaldehyde and heavy metal free,antimicrobial, non explosive and is not fire hazard
Primary Routes of Entry:EYES:Dust may irritate the eyes from mechanical abrasion causing watering and redness
Material Safety data Sheet(MCB Mineral Composite Board)
Mineral Composed Board MSDS No. MCB-20111003
MSDS No. MCB-20111003Page 2 of 7 MCB (Mineral Composite Board)
SKIN:Dust may cause irritate of the skin.INGESTION:Swallowing the dust from this product may result in irritation to the mouth and gastrointestinal tract.INHALATION:Dust may cause irritation of the nose, throat, and airways, resulting in coughing and sneezing.
SECTION 4: FIRST AID MEASURESEYES:Remove contact lens. Flush with running water or saline for at least 15 minutes.Seek medical attention if redness persists or if visual changes occur.SKIN:Wash with mild soap and water. Contact physician if irritation persists or later develops.INGESTION:If ingested, dilute by drinking large amounts of water. Do not induce vomiting. Seek medical attention.If unconscious, loosen tight clothing and lay the person on his / her side. Give nothing by mouth to an individual who is not alert and conscious. Seek medical attention.INHALATION:Remove to fresh air. If shortness of breath or wheezing develops, seek medical attention.
SECTION 5: FIRE-FIGHTING MEASURESMCB Board products are nonflammable, non explosive and non combustible.Fire and Explosion HazardFlash Point: Not applicable.Auto-ignition: Not applicableExtinguishing Media:This material is non combustible. Appropriate extinguishing media should be used for surrounding fire.
Mineral Composed Board MSDS No. MCB-20111003
MSDS No. MCB-20111003Page 3 of 7 MCB (Mineral Composite Board)
Fire Fighting:Fire fighting personnel should wear normal protective equipment.
SECTION 6: ACCIDENTAL RELEASE MEASURESThe following applies only to spills or releases of dust generated during cutting or sanding MCB Board.Precautions: Cleaning up areas where dust has been produced. Wherever possible, dust should be controlled with engineering controls such as local exhaust ventilation, dust suppression with water and containment, enclosure or covers.
Mineral Composed Board MSDS No. MCB-20111003
MSDS No. MCB-20111003Page 4 of 7 MCB (Mineral Composite Board)
Cleanup Methods:1. A fine water spray may be used to suppress dust when sweeping.2. Vacuuming with an industrial vacuum cleaner with a high-efficiency particulate filter is recommended over sweeping. 3. Waste may be disposed of by landfill in compliance with goverment and local requirments.
SECTION 7: HANDLING AND STORAGEHandling and Storage Products do not present a health hazard. The controls below apply to dust generated from the boards by cutting, drilling, routing, sawing, crushing, or otherwise abrading, and cleaning or moving sawdust.
Other Precautions:Exposure to dust be kept as low as reasonably possible. Exposure to respirable (fine) dust depends on a variety of factors, including activity rate (i.e. cutting rate), method of handling (i.e. electric shears), environmental conditions (i.e. weather conditions, workstation orientation) and control measures used. Wherever possible, practices likely to generate dust should be carried out in well ventilated areas (i.e. outside). The work practices and engineering controls set out in Section 8 should be followed as precautions to reduce dust exposures.
SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION Cutting Outdoors:1. Lijiamei Taiwan Products recommends positioning cutting station so that wind will blow dust away from user or others in working area and allow for ample dust dissipation.2. Use the right methods based on the required cutting rate and jobsite conditions. 1. Score and snap using carbide—tipped scoring knife or utility knife 2. Fibercement board shears. 3. Dust reducing circular saw and vacuum extraction.
Mineral Composed Board MSDS No. MCB-20111003
MSDS No. MCB-20111003Page 5 of 7 MCB (Mineral Composite Board)
Cutting Indoors:1. Cut only using score and snap method or with Fiber Cement Shears2. Position cutting station in a well-ventilated area to allow for dust dissipation.
Always use correct tools when executing all cutting operations. Ventilation:Use adequate exhaust ventilation to keep airborne concentrations below the permissible exposure limit.Respiratory Protection:Dust mask is recommended. .Eye Protection:When cutting material, dust resistant safety goggles / glasses should be worn.Skin Protection:Loose comfortable clothing should be worn. MCB Products recommends that direct skin contact with dust and debris be avoided when possible by wearing long sleeved shirts and long trousers, a cap or hat, and gloves.Sanding / Drilling / Other Machining:If sanding, drilling, or other machining is conducted, MCB Products recommends wear a NIOSH-approved dust mask.
SECTION 9: STABILITY AND REACTIVITYStability: The MCB Board products identified in section 1 are stable under ordinary conditions.Conditions to Avoid: Excessive dust generation Without proper dust mask protection.Materials to Avoid: Incompatibility: Hydrofluoric acid Will dissolve Mag- nesium Oxide and can generate Magnesium Chloride fumes.
SECTION 10: TOLXICOLOGICAL INFORMATIONMCB Board products are non toxic in their intact form. The following applies to dust that may be generated during cutting and sanding. It is possible that repeated inhalation exposure to MCB Board fiber dust over time may lead to inflammation of the lungs in humans.
Mineral Composed Board MSDS No. MCB-20111003
MSDS No. MCB-20111003Page 6 of 7 MCB (Mineral Composite Board)
SECTION 12: ECOLOGICAL INFORMATIONBecause MCB board is made with a naturally occurring mineral, releases that may occur into the environment are not expected to leave any hazardous material that could cause a significant adverse impact.
SECTION 13: DISPOSAL CONSIDERATIONSMCB Board is not an RCRA hazardous Waste.
SECTION 14: TRANSPORT INFORMATIONThere are no special requirements for storage and transport of MCB Board
SECTION 11: PHYSICAL AND CHEMICAL PROPERTIESAppearance:Various colors depending on application, each with varying dimensions according to product used.
Free formaldehyde
Free asbestos
Free TCLP
Fireproof
Thermal resistence
Acid resistence
Alkali resistence
Antimicrobial
Length variation due to
water absorption : 0.06%
Thickness swelling due
to absorption : 0.01%
Water infiltration : no water drop at back
of the specimen
Air-dried specific gravity : 1.13g/cm3
Dimentional stability : -0.24% (100 oC)
; -0.03% (-40 oC)
Bending strength : 24.8 N/mm2
Internal bonding strength : 1.9 N/mm2
Impact resistence : there are no occurrence
of upheaval or splitout on the back of
specimen
Bending rupture load : 129 kgf
Wood screw holding power : 1114N
Sound-insulated
Mineral Composed Board
MSDS No. MCB-20111003Page 7 of 7 MCB (Mineral Composite Board)
MSDS No. MCB-20111003
The information contained herein relates only to specific materials listed in the document. It does not address the effects of MCB Board dust When used in combination with other materials or substances, or When used in other processes. Because conditions of use are beyond Lijiamei Taiwan Products control, the company makes no representations, guarantees or Warranties, either express or implied warranties as to the fitness of the product for use, and assume no liability related to the information contained above.
UN No: None allocatedDangerous Goods Class: None allocatedHazchem Code: None allocatedPoisons Schedule: None allocatedPacking Group: Not applicableLabel: Not a DOT hazardous material.
SECTION 15: REGULATORY INFORMATIONDOT Hazard Classification: NonePlacard Requirement: Not a DOT hazardous material.Listed substance: NoUnlisted Substance: NoReportable Quantity (RQ): NoneCharacteristic(s): Not applicableRCRA Waste Number: Not applicable
SECTION 16: OTHER INFORMATIONPreparation of Information and Disclaimer:MCB Board Products cannot control the use of its products, and therefore specifically disclaims liability and responsibility arising from the use, misuse and alteration of its products.
Mineral Composed Board
PACKING LIST
PCS/PLT PLTS PACKINGMODE kgs/PC kgs/20'
200 6 FLAT 1,200
270 2 STAND UP 540
100 6 FLAT 600
135 2 STAND UP 270
67 6 FLAT 402
90 2 STAND UP 180
50 6 FLAT 300
67 2 STAND UP 134
40 6 FLAT 240
54 2 STAND UP 108
33 6 FLAT 198
45 2 STAND UP 90
MCB 1220X2440 mm
1220*2440*15mm 348 46.70 16,252
1220*2440*12mm 434 40.00 17,360
18,270
1220*2440*18mm 288 55.00 15,840
18,100
870
11.671220*2440*3mm
1220*2440*6mm 21.00
1220*2440*9mm 582 31.10
SPEC(mm)PACKING
20,3061,740
PCS/20'
PCS/PLT PLTS PACKINGMODE PCS/20' kgs/PC kgs/20'
915*1830*3mm 300 12 FLAT 3,600 6.50 23,400
915*1830*6mm 150 12 FLAT 1,800 12.00 21,600
915*1830*9mm 100 12 FLAT 1,200 17.80 21,360
915*1830*12mm 75 12 FLAT 900 22.50 20,250
915*1830*15mm 60 12 FLAT 720 26.00 18,720
915*1830*18mm 50 12 FLAT 600 31.00 18,600
SPEC(mm)PACKING
MCB 915X1830 mm
Mineral Composed Board
10% Loading tolerance allowed
Mineral Composed Board
PCS/PLT PLTS PACKINGMODE PCS/20' PCS/20' kgs/PC kgs/20'
915*1830*3mm 300 6 FLAT 1,800 6.50
1220*2440*3mm 200 6 FLAT 1,200 11.67
915*1830*6mm 150 6 FLAT 900 12.00
1220*2440*6mm 100 6 FLAT 600 21.00
915*1830*9mm 100 6 FLAT 600 17.80
1220*2440*9mm 67 6 FLAT 402 31.10
915*1830*12mm 75 6 FLAT 450 22.50
1220*2440*12mm 50 6 FLAT 300 40.00
915*1830*15mm 60 6 FLAT 360 26.00
1220*2440*15mm 40 6 FLAT 240 46.70
91581830*18mm 50 6 FLAT 300 31.00
1220*2440*18mm 33 6 FLAT 198 55.00498 20,190
750 22,125
600 20,568
1,500 23,400
1,002 23,182
MCB Mixed Packing
SPEC(mm)PACKING
3,000 25,704
10% Loading tolerance allowed
PCS/PLT PLTS PACKINGMODE PCS/20' PCS/20' kgs/PC kgs/20'
33 6 FLAT 198
45 2 STAND UP 90
25 6 FLAT 150
32 2 STAND UP 64
20 6 FLAT 120
27 2 STAND UP 54
1200*2400*24mm
1200*2400*18mm
1200*2400*30mm 174
MSIP sandwiched in lumber core 1220X2440mm
SPEC(mm)PACKING
288
214
40.78
47.49
66.15
11744
10163
11510
top related