oshaindoor air quality standard 1910 - cdccapitaldemolitionandconstruction.com/pdf/emissions...
Post on 10-Feb-2019
214 Views
Preview:
TRANSCRIPT
OSHAIndoor Air Quality Standard # 1910.1000
The Occupational Safety and Health Administration (OSHA) has taken the lead on hazardous emissions
in the workplace by creating and enforcing a CO (carbon monoxide) emissions standard that all
workplaces must follow.
The official wording of the stand is as follows:
'The CO (carbon monoxide) concentration of an enclosed workplace (i.e. a building with no fewer
than 3 walls) must be no greater than 35 ppm in the ambient air (i.e. the air around the working
machines that workers breathe) over an eight hour work shift."
This emission standard is not a tailpipe standard although many OSHA inspectors fail to test properly
as they do take their samples at the tailpipes of machines.
The reason that OSHA has targeted CO is that this particular emission when exposed to humans will
restrict our blood cells ability to absorb oxygen, as a result causing lethargy, lightheadedness and
eventual suffocation. The development of cancer has also been linked to long term exposure to CO.
100
90
80
70
Q) 60110rei•..c: 50Q)u•..Q)0- 40
30
20
10
0
Clean Emissions Purifier PerformanceDiesel Exhaust
-He-eo-DPM
100 150 200 250 300 350 400 450
Temperature (Celsius)
This data is provide by Diamond Products, Inc.
Carbon Monoxide - Diesel vs. LPG/Gas
CO (Carbon Monoxide) = The deadliest and most watched of pollutants. CO if not removed from
diesel, gas and LPGexhaust can upon exposure to humans be very toxic and lethal. CO restricts
the red blood cells to absorb oxygen molecules thereby suffocating the body. Lethargy and
dizziness are common side effects of CO exposure and long term exposure can be cancer causing.
OSHA Indoor Air Quality Standard # 1910.1000
The Occupational Safety and Health Administration (OSHA) has taken the lead on hazardous
emissions in the workplace by creating and enforcing a CO (carbon monoxide) emissions standard
that all workplaces must follow.
The official wording of the stand is as follows:
liThe CO (carbon monoxide) concentration of an enclosed workplace (i.e. a building with no fewer
than 3 walls) must be no greater than 35 ppm in the ambient air (i.e. the air around the working
machines that workers breathe) over an eight hour work shift."
Carbon Monoxide - Diesel v.s LPG/ Gas
100009000
- 8000s0- 70000-
c: 60000
:2: 5000~ 4000Q)0-
'" 3000t:III 20000-
1000a
LPG / Gas Diesel
This data is provide by Diamond Products, Inc.
Exhaust Gas Emissions Fact Sheet(September 7,2004)
Untreated Exhaust Gas Emissions By Fuel TypeFUEL Carbon Hyd roca rbons Diesel Nitrous
Monoxide (CO) (He) Particulate Oxide (NOx)Matter(DPM)
Diesel (high sulfur, 300-1,000 ppm 200-500 ppm 20-100 mg/ms 1,000 ppmlow sulfur, bio-diesel)
Propane (LPG) 3,000 - 10,000 ppm 500 - 1,000 ppm - 1,000 ppm
Unleaded Gas 5,000 - 40,000 ppm 1,000 - 5,000 ppm - 1,000 ppm
Typical Carbon Monoxide Conversion ResultsFuel Type Before Clean Emissions After Clean Emissions
Diesel 300 - 1,000 ppm 10-100 ppm
Propane (LPG) 3,000 - 10,000 ppm 20-950 ppm
Gas 5,000 - 30,000 ppm 250 - 2,500 ppm
Clean Emissions CO Conversion(ppm)
10000900080007000600050004000300020001000
o
• Before Clean Emissions
• After Clean Emissions Installed
Diesel LPG GAS
This data is provide by Diamond Products, Inc.
California Environmental Protection Agency EXECUTIVEORDERU-R-02S-0183Air Resources Board Kubota Corporation New Off-Road
Compression-Ignition Engines
Pursuant to the authority vested in the Air Resources Board by Sections 43013,43018,43101,43102,43104 and 43105of the Health and Safety Code; and
Pursuant to the authority vested in the undersigned by Sections 39515 and 39516 ofthe Health and Safety Code andExecutive Order G-02-003;
IT ISORDEREDAND RESOLVED:That the following compressionOignition engines and emission control systems producedby the manufacturer are certified as described below for use in off-road equipment. Production engines shall be in allmaterial respects the same as those for which certification is granted.
2005
Displacement Fuel TypeModelYear
Engine Family
1,123, 1,498 Diesel
Useful life(hours)
5KBXL01.5BAD 5000
Indirect Diesel Injection, Turbocharger,Puff Limiter (Some Models)
Smoke Loader, Other Industrial Equipment
Special Features & Emission Control System Typical Equipment Application
The engine models and codes are attached.The following are the exhaust certification standards (STD) and certification levels (CERTS)for hydrocarbon (HC), oxidesof nitrogen (NOx), or non-methane hydrocarbon plus oxides of nitrogen (NMHC+NOx), carbon monoxide (CO), andparticulate matter (PM) in grams per kilowatt-hour (g/kW-hr), and the opacity-of-smoke certification standards andcertification levels in percent (%) during acceleration (Accel), luggin (Lug), and the peak value from either mode (Peak)for this engine family (Title 13, California Code of Regulations, (13 CCR)Section 2423):
Rated Power Emission Exhaust (g/k-W-hr) Opacity (%)Class Standard HC NOx NMHC+NOx CO PM Accel Lug I Peak
Category19 s kW< 37 STD N/A N/A 7.5 5.5 0.60 20 15 150
CERT - - 5.6 0.8 0.20 6 1 117
BE IT FURTHERRESOLVED:That for the listed engine models, the manufacturer has submitted the information andmaterials to demonstrate certification compliance with 13 CCRSection 2424 (emission control labels), and 13 CCRSection 2425 and 2426 (emission control system warranty).
Engines certified under this Executive Order Must conform to all applicable California emission regulations.
This Executive Order is only granted to the engine family and model-year listed above. Engines in this family that areproduced for any other model-year are not covered by this Executive Order.
NOTE: These readings are WITHOUT the catalytic converter.
Capital Demolition & Construction Equipment DOES have catalytic converters installed.Please refer to our 'Clean Air Scrubber' link on our Safety & Equipment Page for further
information regarding the catalytic converters installed on our equipment.
Please see attached copy of original letter.
Punluanl to the adhority In IW Reeource& Board by ~ <43013.43018.43101, .3102. 43104 and43105 d the Hee&Ih and Slftty CocIe; and
Pur$U8Rt to the 8UUlor1ty vatec11n 1M ~ by 8ecdont 38515 and ~1D of the •.••• 11hWid Setety Codeand ExecutIve OrderG-02.Q03;
IT IS AM) RESOLVED: 'Thet h followtng ~ eng end emission controf ayatemsprOducedby ~ "..u:fac:turer are certlDed8$ deea'ibed below for uta in oIf--f'O:ad equipment. ProductIon engines
be In au matariDI reepeda the ..",. •• w.o.e fOr wNdt oertIfieetkJn granted.
MODEL 'NaY ~.'T"I'N USEFULLFe
YEAR "'\ ~200S 5KBXL01 JSIW) 1.123.1 •• J IJ ~ S)O()
IJIeClAL RAlUAES & DlIS8ION TYPICAL IQUI'MINr APPUCA1'1ON
1ndIIect0teeel ~ T~. Loader, Oller InduAiaI equipmentSmoke"..lbIter (Some~)
The engine modeIa afld codes •• ~.
Tho foIc:Jw\ngere uhaIat c:ertII'IIr:Iti ~ (Sl'l)) hi QeftIfIaatian t.veI& (CERT) tor hydlOCllrbon (He),axidIs d ~ (NOx). or ~ hydrocaboIJ pIut oxtd at nIIrogen (NMHC+NOx). c;m1)on rnonoxJdo(CO). end pettieu rnatW (PM) In gram. per -hoUr~«). n the opacity-of-snoke ~~ and ~ __ In pen:ent (%) duItnG .ccelendlM (AocIII).1ugging (tug) • .-td the peek value frOmeither mode (peak) fat this engtne fWnIy (TIh 13. C8IIfomIa Code d Regulationt. (13 OCR) Section 2.23):
MTm ZXMAUIT faI\W~ 0fI'-.c1'TV (%)POWER STANDAIUJ
He IoIQa NIIHC+fDI co PM ACea LUG PEAKc:u&$ CATEGORY19~kW<31 Tl«2 a11) HI••• NJA 7~ 5.' 0.80 20 15 60
cetT - - 5.8 0.& 0.20 6 1 17
IT FUR'IMER RESOL: D; That tQt 1he ~ models. the manufacturer has aubmlttBd the Information andrnafIIt'iIIII to demoIlO1IlIte catIIcatIGIi ~ with 13 CCR secaon ~ (......, control ). and '3 CCRSectklnA 2425 and 2428 (Mllnion control system W8I11H'Ity).
engines certified WIder'" ~ Order must conform to -'lc8b1e CaRfomIaem ulan regulatIOns.
Thta &ecuUve Order •• only grantH &0•••• ~ fIImH)' and mod,. ~ ••. 11ated above. Enelna In thlefamily thM .,. prOduced for .ny other model y..- •.• not oov.nd ~ We Executiv. Order.
~ day of October 2004.
~'--l • Chief~il . . Operation. 0IviII0n
top related