print function operating guide-ms906ts function... · 2020. 6. 1. · ats(eu) 2016/01-2019/06 id...
Post on 16-Oct-2020
1 Views
Preview:
TRANSCRIPT
MS906TS
Print Function Operating Guide
Please activate all the TPMS sensors to get the IDs before performing any TPMS relearning. See picture 1.
1
Perform OBD relearn to write sensor IDs to the ECU (picture 3), the data of “Final customer record” will be refreshed once the OBD relearn was completed.
3 4Save test report via the Save button (Picture 4), or print all data via the Print button (Picture 5). Then the test report will display (Picture 6).
Click on “Read IDs from Vehicle” and “Read DTCs” to get the ECU registered TPMS sensor IDs and DTCs. See picture 2.
Note:Before doing any relearn operation, the data from Step 1 and Step 2 will be recorded as the “Initial customer record”.
2
Picture 1
Picture 3
Picture 6
Picture 4
Picture 5
Picture 2
Email:supporttpms@auteltech.comWeb:www.maxitpms.com
top related