the operation processing of cluster adjusting via obd method€¦ · ⑶turn on the vehicle...

The operation processing of cluster adjusting via OBD method

(Take the VW GOLF F4 for an example： ) ⑴Try to find the OBD-II 16 pin diagnostic plug in vehicle.

⑵Choose proper adapter and connect the cable with 9 PIN COM, 25 PIN COM with DIGIMASTER- II body.

⑶Turn on the vehicle electrical power, click into the “OdoAd Juster”.

⑷Click into “European vehicles”.

www.cardiag.co

.uk

Any questions, please don't hesitate to contact us. Email: sales01@cardiag.co.uk Skype:cardiag.co.uk sales02@cardiag.co.uk Yahoo:cardiag.service@yahoo.com Phone:86-15072360818

⑸Click into “ VW ”.

⑹Click into “Diagnosis”.

⑺Click into “Golf4 V2”.

www.cardiag.co

.uk

Any questions, please don't hesitate to contact us. Email: sales01@cardiag.co.uk Skype:cardiag.co.uk sales02@cardiag.co.uk Yahoo:cardiag.service@yahoo.com Phone:86-15072360818

⑻Click into “Next”.

www.cardiag.co

.uk

Any questions, please don't hesitate to contact us. Email: sales01@cardiag.co.uk Skype:cardiag.co.uk sales02@cardiag.co.uk Yahoo:cardiag.service@yahoo.com Phone:86-15072360818

⑼Click into “write KM”. Attention: Current KM Value 099984KM. Only allowed to adjust if not existing large error between the original and new mileage.

⑽Write into new mileage and click “ok”.

www.cardiag.co

.uk

Any questions, please don't hesitate to contact us. Email: sales01@cardiag.co.uk Skype:cardiag.co.uk sales02@cardiag.co.uk Yahoo:cardiag.service@yahoo.com Phone:86-15072360818

⑾After hitting the cluster, click “ok”, exit the interface.

⑿Check if it displays the right mileage and disconnect the wiring.

www.cardiag.co

.uk

Any questions, please don't hesitate to contact us. Email: sales01@cardiag.co.uk Skype:cardiag.co.uk sales02@cardiag.co.uk Yahoo:cardiag.service@yahoo.com Phone:86-15072360818