aspire release 6 august 10, 2006. features remote conference timers by cos multiple acd delay...
TRANSCRIPT
Aspire Release 6
August 10, 2006
Features
Remote Conference Timers by COS Multiple ACD Delay Message Sources Station Park SMDR Enhancement SIP Station Enhancements Speaker Volume Option WebPro data save progress WebPro pull-down menu for F-Key/DSS Key
Features
SIP Carrier B & C Modes Supported VRS Enhancement End-user programming via Web Browser Conference Bridge Call forward using Centrex lines CTI – Tapi 1.x over LAN CVM/inSkin support QSIG networking End User License Agreement (EULA)
Aspire Release 6 Features
Remote conference- Password protected
- Requires VRS (no intraMail)
- 32 Parties maximum
- 4 Simultaneous Conferences on Aspire M/L/XL
- 1 on Aspire S
Timers by COS- Allows different timers for different COSs.
- Not all system timers
- Many major timers are included (CF, RNA, Transfer recall, etc.)
Aspire Release 6 Features
Multiple Sources for ACD delay messages- CVM
- ACI
- VRS
- Local VM
Station Park- Transfer a call to a station park orbit
- Use Station Park FKey, Softkey or dial suffix code
- Use directed call pickup to answer
Aspire Release 6 Features
SMDR Enhancement- Increase Dialed No/CLI field to 20 digits
- Can show both trunk # and DID digits in the Line field (3 digit for trunk, first 6 for DID)
- External Call Forward Station Display (Not transferring station)
SIP Station Enhancements- More system functionality supported.
- Previously based on Sbus, now based on DECT feature set.
Speaker Volume Option- Option to retain the speakerphone volume or reset to
default after a call ends.
- Uses same option as handset volume.
Aspire Release 6 Features
WebPro data save progress- New screen added to show the system is saving
any program changes. WebPro Pull-down menu
- Shows available options when programming feature keys or DSS keys.
SIP trunks- Carrier modes A, B & C are now supported.
VRS Enhancement- When using VRS as auto attendant you can now
dial when dialed extension is no answer or busy.
Aspire Release 6 Features
End user programming using Web Browser- 4 users simultaneous
- Password protected
- Program Function Keys, DSS Keys, Speed dial
- Night mode
- Fixed Call forwarding
UserPro – Home Page
UserPro – Home page Detail
UserPro – FKey Programming
Aspire Release 6 Features
Conference Bridge- 16 total channels
- Voice prompts
- Password protected
- Amplified and compensated
- Conference scheduler (using a Web Browser)
- Multiple cards may be installed (Up to 15)
- Uses 16 Station Ports
Conference Bridge Scheduler
Aspire Release 6 Features
Call forward using Centrex lines- Generates hookflash then dials stored number
First Party TAPI over LAN- License based. Purchase in groups of 1 or 5
- No CTA/CTU required
- 32 Maximum
- Can mix LAN licenses with CTA/CTU units.
CVM/inSkin support- Supports an inskin VM and a VM set up as
centralized
- Useful for external fax servers
Aspire Release 6 Features
QSIG networking- ISDN based signaling protocol
- Connect dissimilar switches in a network providing basic call control
- Aspire can be only an end point in a QSIG network. It cannot be a transit point
End User License Agreement (EULA)- All new Aspire CPUs will have agreement.
Similar to software cds. Eg: “By opening this envelope you agree to the terms and conditions…….”
- Web software downloads have EULA as well