assembly procedure electrical specification data sheet ten … · 2019. 10. 13. · ten consent 3....
TRANSCRIPT
c
b
ad
2. Strip cable
a =
DRAWN
CHK'D
APPV'D
DIMENSIONS ARE IN MILLIMETERS
NAME SIGNATURE DATE
DO NOT SCALE DRAWING
1. Slide the cable into the connector and push home
SHEET 1 OF 1
REVISION A4
GE
IG
29/10/2008
29/10/2008
75 Ohm BNC SKT RG179Description
10-056-B36-AB
A03
1. Slide crimp sleeve onto cable
COAX CONNECTORS LTD
1. Fan braid
(trim excess braid if necessary)c =
MODIFICATIONS NECESSARY WITHOUTPRIOR NOTICE.
Tel: +44(0)20 8538 9090 Fax: +44(0)20 8538 9890 Email: [email protected]
10N min
b =
6-8 COLNE ROAD, TWICKENHAM,
75 Ohm
MIDDLESEX. TW1 4JR
sized crimp tool
0 - 3 Ghz (Cable limited)
8.0mm
-35 to +70 Deg C
Part Number
2008. THIS DOCUMENT IS THE PROPERTY OF COAX CONNECTORS LTD. REPRODUCTION OR COMMUNICATION IN ANY FORM TO A THIRD PARTY IS PROHIBITED W
ITHOUT PRIOR W
RITTEN CONSENT
3. Slide insulator over cable conductor, upto dielectirc & sleeve2. Slide pusher sleeve onto cable over the dielectric.
C.
16.0mm
Centre Contact:
until the centre contact “CLICKS” into place
12.0mm
Crimp Sleeve:
100
STRIPPING DIMENSIONS
HEX 1.72mm A/F
THE CONTINUAL GOAL TO IMPROVE OUR PRODUCTS,
d =
WE RESERVE THE RIGHT TO MAKE ANY
DATA SHEET
AND IS SUBJECT TO CHANGE WITHOUT NOTICE. IN
THE INFORMATION IS GIVEN AS AN INDICATION ONLY
60N min
500 M-Ohm min
1500 V eff min
Assembly Procedure
Operating Temp:
3. Crimp the crimp sleeve using the appropriate2. Slide the crimp sleeve over the braid
HEX 5.41mm A/F
Tooling
Electrical Specification
Impedance:
Frequency:
Dielectric W/V:
Insulation res:
Mechanical Specification
Centre contact retentionAxial Force:
Cable Retention:
Mating cycles:
Environmental Specification
4.0mm
1. Slide centre contact onto cable conductor up to insulator & sleeve2. Ensure that the conductor is visible through the Contact inspection hole.3. Crimp the centre contact using appropriate sized crimping tool
5.2 REF
11 A/F REF
3.1 REF
0.4 REF
0.5 REF
3.2 REF
36 REF
7
6 INSULATOR PTFE N/A
5 PUSHER SLEEVE BRASS NICKEL
4 CRIMP SLEEVE BRASS NICKEL
3 CENTRE CONTACT BERYILLIUM COPPER GOLD
2 INSULATOR PTFE N/A
1 BODY BRASS NICKEL
ITEM DESCRIPTION MATERIAL PLATING