automatic bollard -from angeldp bollards
DESCRIPTION
Electric bollard parameter(600*114*3): Bollards body weight: 48KG Thickness: 3MM Diameter: 114MM Surface treatment: Polishing drawing Height: 600MM Embedment depth: 1200MM Running model: DC machine Reflective strip: Glosses Crystal lattice reflective tape 30MM Noise DB:TRANSCRIPT
Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,
Tel:0086 21 64766696 Fax:0086 21 64765594
ELECTRIC AUTOMATIC BOLLARD DP-PP-020
The Electric-Automatic bollard adopt the low voltage direct current machine with electronic brake as the power unit, it is safety and reliable with low
consumption, quick lift speed, low noise, stable running, ext. Through the connection with the third part access control system( smart card, RFID,
remote controller and program control ) . You can choose different auxiliary devices, such as loop, buzzer, and infrared prevention of collision. The
rise/fall time is 3-5 seconds, can satisfy the needs of high frequency access control.
The recommended electric automatic bollard maximum install spacing is 1.4, the depth of excavation have to depend on the different specifications
cylinder.
1. Application:
Public carport, private yard and other high frequency access control.
2. Technical parameter:
Bollards body weight: 48KG
Thickness: 3MM
Diameter: 114MM
Surface treatment: Polishing drawing
Height: 600MM
Embedment depth: 1200MM
Running model: DC machine
Reflective strip: Glosses Crystal lattice reflective tape 30MM
Noise DB: <60DB
Installation size: 320*300*1200 MM
Work environment: -20°+70°
Protection level: IP67
3. Component:
Reflector band
Various colors of Glossee reflecting band are optional .it
can be clear in the night only need weak light.
Top cover
The simple design can
compatible with all kinds of
architectural style. The
excellent workmanship bear
any proximity attack
Material 304 stainless steel,
LED light Various colors of LED lights are optional. Can make it beautiful and warn.
Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,
Tel:0086 21 64766696 Fax:0086 21 64765594
Limited It used to control the cylinder’s rise and fall position, when the contactor touch the limiting stopper, cut off the electricity supply will stop rising and falling, it has the function of over travel.
Flange Anti-skid flange.. Unique swirl marks design. Compatible with various road surface styles, built-in PA orientation.
DC Motor
Voltage:24v Power:40W
Speed:3100RPM Torque:1.3kg.cm
Current:2.0A Brush service Life:
2000H
Electric-automatic Bollard
4. Installation note:
Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,
Tel:0086 21 64766696 Fax:0086 21 64765594
REMOVABLE BOLLARD DP-PP-027
Removable bollard aims at low frequency access control, it provides the best effective solution, not only increase the flexibility, but also simplifies the
balance of strength. Our professional mechanical locks and “T” type handle are patented, providing users with more beautiful appearance and easier
operations. Removable bollard can also work together with other series of bollards.
Removable bollard is easy to install, concrete slab is enough. The recommended maximum spacing is 1.4m, the depth of excavation of 30 cm.
1. Application:
Convenient store, supermarket and so on.
2. Technical parameter:
Bollards body weight: 18KG
Thickness: 3MM
Diameter: 114MM
Surface treatment: Polishing drawing
Height: 600MM
Embedment depth: 300MM
Running model: manual operation
Reflective strip: Glosses Crystal lattice reflective tape 30MM
Installation size: 160*260*300 MM
Protection level: IP67
3. Components
Base cover
To protect the base when the
removable bollard moving away and
used, can also be locked or released.
Reflector band Reflective crystal lattice glossee color
options with a variety of colors,
exposure to weak light, clearly visible at night.
Lock Base Bollards with a key to the base, after the upper surface of buried flush with the ground, keys can be locked or released Put bollards mobile.
Material 304 stainless steel, 316 stainless steel, carbon steel electrophoresis optional spray paint.
Anti-theft screws
A variety of optional anti-theft screws,
tools need to be exclusive.
Orient and lock Supporting the installation and locking.
Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,
Tel:0086 21 64766696 Fax:0086 21 64765594
It can assure the lock hole clean It can lock automatically after lifting or discharging
Removable Bollard
RETRACTABLE BOLLARD DP-PP-025
Retractable bollard is the most economical among the bollards. Its buried construction solves the problem of the cylinder storage in
access required. Unique flat double guides design save space and have good stability, it also minimizes the damage on surface of cylinder
and assures the service life. Our professional mechanical lock and “T” clamshell handle are patented, providing users with more beautiful
appearance and easier operations. Retractable bollard can also work together with other series Bollards.
The recommended maximum spacing is 1.4m , the depth of excavation should depend on the different specifications of cylinders.
1. Application:
Private garage, villa and so on.
2. Technical parameter:
Bollards body weight: 34KG
Thickness: 3MM
Diameter: 114MM
Surface treatment: Polishing drawing
Height: 600MM
Embedment depth: 900MM
Running model: manual operation
Reflective strip: Glosses Crystal lattice reflective tape 30MM
Installation size: 250*250*1000 MM
Protection level: IP67
3. Components:
Reflector band
Various colors of Glossee reflecting
band are optional .it can be clear in the
night only need weak light.
Lock unique handle, friendly for up and down operation.
Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,
Tel:0086 21 64766696 Fax:0086 21 64765594
Material 304 stainless steel
Built-in lock bar It can assure the lock hole clean It can lock automatically after lifting or discharging
HYDRAULIC-AUTOMATIC BOLLARD DP-PP-021
Hydraulic-automatic bollards are used for high security access control; the rise-off can be stand-along controlled or linkage control not only by PCC
(Programmable Control Cabinet), but also by remote. It supports direction changes during the running and avoids accidents, the hydraulic automatic
bollard adopts high speed hydraulic unit, strong power, the rise/fall time is 4-6(adjustable), high reliability.
1. Application:
Government, nuclear power plant, the military warehouse, gas station, airport, docks and so on.
2. Technical parameter:
Power: 350W
Voltage: 220V/50HZ
Current: 2A
Bollards body weight: 65KG
Goss weight: 120KG
Thickness: 6MM
Diameter: 219MM
Surface treatment: Polishing drawing
Height: 600MM
Embedment depth: 1000MM
Material: 304 stainless
Running model: hydraulic pressure
Rising and Falling time: 5-9 second
Reflective strip: Glosses Crystal lattice reflective tape
Install Size: 420*450*1000 MM
Protection level: IP67
3. Components:
Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,
Tel:0086 21 64766696 Fax:0086 21 64765594
Reflector band
Various colors of Glossee reflecting
band are optional .it can be clear in the
night only need weak light.
Top cover The simple design can compatible with all kinds of architectural style. The excellent workmanship bear any proximity attack
Material 304 stainless steel, 316stainiess steel, carbon steel with sprayed electrophoresis painting.
Pump parameter table
Motor Power 750W
Pump displacement 3.8L/min
Take-off and landing time 5sec
Flange Anti-skid flange Unique swirl marks design. Compatible with various road surface styles, built-in PA orientation.
Hydraulic-automatic Bollard
4. Installation Note:
1) Using professional tool depend on geology to detect the size and the length for dig which decided by technology require.
2) Make sure the drainage of the soil( water flooding into the hole to observe the drainage speed, if they can’t be discharged in half an hour, it
will be necessary to arrange extra drainage system)
3) Lay down about 35CM thickness of sand, it should be enough strong to avoid to earth subsidence.
4) Connect all kind of wire and pipe, repeat to debug to make sure every cylinder of the whole system are in the level and line.
5) Pour concrete for fixing in a good drainage system condition.
Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,
Tel:0086 21 64766696 Fax:0086 21 64765594
PNEUMATIC-AUTOMATIC BOLLARD DP-PP-022
We can provide two kinds of system modes for different applications, open square type and access type.
The pneumatic-automatic bollards can be stand-along control, especially in square; one PCC (Programmable Control Cabinet) can control 20
bollards together. It also can fit the different rise-off time require, the fastest time is 3 sec. it also supports direction changes during the running and
avoids accidents, The pneumatic-automatic bollard does not need strong current construction, it has environmental power supply, reliable and safe.
1. Application:
Square, Public locations which need many bollards and have fast speed requirement.
2. Technical parameter:
Work Voltage: 24 V
Bollards body weight: 58KG
Goss weight: 100KG
Thickness: 6MM
Diameter: 219MM
Surface treatment: Polishing drawing
Height: 600MM
Embedment depth: 900MM
Material: 304 stainless
Running model: pneumatic pressure
Rising and Falling time: 3-5 second
Reflective strip: Glosses Crystal lattice reflective tape
Rise – off control: remote control (short range)/drive by wire(less than 100M)
Control cabinet size: 580*800*800
Bollard body size: 420 * 450 *900
Protection level: IP67
3. Components:
Reflector band
Various colors of Glossee reflecting
band are optional .it can be clear in the
night only need weak light.
Top cover
The simple design can compatible with all
kinds of architectural style. The excellent
workmanship bear any proximity attack
Material 304 stainless steel, 316stainiess steel, carbon steel with sprayed electrophoresis painting.
LED lights Various colors of LED lights are optional. Can make it beautiful and warn.
Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,
Tel:0086 21 64766696 Fax:0086 21 64765594
Air cylinder Choose air cylinder according to different specifications of bollards
Flange Anti-skid flange unique swirl marks design. Compatible with various road surface styles, built-in PA orientation.
4. Installation Note:
1) Using professional tool depend on geology to detect the size and the length for dig which decided by technology require.
2) Make sure the drainage of the soil( water flooding into the hole to observe the drainage speed, if they can’t be discharged in half an hour, it
will be necessary to arrange extra drainage system)
3) Lay down about 35CM thickness of sand, it should be enough strong to avoid to earth subsidence.
4) Connect all kind of wire and pipe, repeat to debug to make sure every cylinder of the whole system are in the level and line.
5) Pour concrete for fixing in a good drainage system condition.
6) Pneumatic-automatic bollard need lay pipeline, and consider the location to installation.
Channel model
In Channel mode, each PCC can control 1-3penumatic-automatic bollards, bidirectional control valve, strong power, quick rise/fall speed, support direction changes during running, etc. it can also avoid circuit construction.(except for LED requirements) In case of power off condition, it still can have 3 times of operations, convenient for emergency treatment when have special circumstances.
Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,
Tel:0086 21 64766696 Fax:0086 21 64765594
Square mode
In Square mode, each PCC can control more than 20 pneumatic-automatic bollards. Distance can arrive to 50m, can be unified controlled by one or several units. You can debug every bollard in the whole system to keep the consistency. The power off mode can be set as NO and NC, to ensure the safety.
SEMI-AUTOMATIC BOLLARD DP-PP-026
Semi-Automatic bollard is suitable for higher security but low frequency access control system. Proceed from the economy, it is usually used
together with automatic Bollard, it has higher security protective effect and avoid of complex High/Low Voltage construction. As the safety
requirement increased, the bollard size becomes bigger, the air pressure assistant system of Semi-automatic Bollard will afford more load.
The decline process of Semi-automatic bollard is realized mainly by operator’s press. When the top of cylinder reach the ground level, the
mechanical lock by itself, the rise of Semi-Automatic bollard is realized 100% by the air pressure assistant system of Semi-automatic. After use the
special key to lose the lock, the cylinder will rise automatically to a certain level and locks automatically.
The recommended Semi-Automatic bollard maximum install spacing is 1.4M, the depth of excavation have to depend on the different specifications
cylinder. For special needs please contact local dealers.
1. Technical parameter:
Work Voltage: 24 V
Bollards body weight: 45KG
Goss weight: 100KG
Thickness: 3MM
Diameter: 114MM
Surface treatment: Polishing drawing
Height: 600MM
Embedment depth: 1200MM
Running model: Gas spring
Reflective strip: Glosses Crystal lattice reflective tape 30MM
Noise dB (A) : < 60DB
Shanghai Angel DP Co., Ltd Website: www.angeldp.com Email: [email protected] ,
Tel:0086 21 64766696 Fax:0086 21 64765594 Installation size: 280 * 235 *1200
Protection level: IP67
Work environment: -10°+70°
2. Components
Reflector band
Various colors of Glossee reflecting
adhesive are optional .it can be clear in the
night only need weak light
Keys Can lock automatically to the correspondent Position on the top and bottom, unlocked by the special tool of Fwyoung.
Material 304 stainless steel, 316stainiess steel, carbon steel with sprayed electrophoresis painting.
Flange Anti-skid flange.. Unique swirl marks design. Compatible with various road surface styles, built-in PA orientation.
Power Device According to the various of Semi-automatic bollard to choose the power Device system, it can assure the rise and fall process Success
Semi-automatic Bollard