new bollards - glasdon bollards... · socketed bollards are easy to remove and replace, allowing...
TRANSCRIPT
below- ground socket system
standard bolt-down
fixing
concrete-in anchor (adjustable
depth)
removable
(* fixings may differ from illustrations shown)
7
8
Neopolitan™ 20durapol * * - -impactapol - - - - -
6
Glasdon bollards for effective site
2
ol® material is a polymer specially developed anced flexibility and extensibility properties
ood recovery performance after vehicular mpactapol has abrasion resistance, the
material will not chip or rust and never needs painting.
Durapol® material is a polymer formulated to withstand extremes of temperature and is impact-tested in our Quality Assurance Laboratory as part of our BS EN ISO 9001:2000 test procedure. Durapol will not chip or rust, is easy to clean and never needs painting.
Guardsman™ anti-ram raid is a reinforced, site protection bollard fixing for improved 24-hour security.
page no BOLLARD
below ground guardsman anti-ram raid
below-ground extended
base
permanent MATERIALSpage 6
fIxINGS pages 4-5
lockfastsocketsystem
impactapol - - - - Advanced Neopolitan™ 150
durapol® - - - - impactapol® - - - -
NEWGlasdon Manchester™
Infomaster™
Neopolitan™ 150
10
9
10 durapol - -impactapol - - -
Ensign™
durapol - -impactapol - - -
Mini Ensign™
16 durapol - - - - - Edgeliner™
Rebound Signmaster™
15
15 durapol - - - - -clifton™
17 * * - - - *
Buffer™
14durapol - - - - -impactapol - - - - - victory™
Neopolitan Signhead™
11
- - - - - * Enviropol® 17
durapol - - - - -impactapol - - - - -
Admiral™
13 durapol - -
12
centrum™ - - - - - *
16 durapol - - - - - Edgemaster™ 20
jubilee™durapol - - - - -impactapol - - - - -
impactapol - - - -
enviropol® 100% recycled plastic
grade 316 stainless steel
100% recycled resilient rubber
durapol - - - -impactapol - - - - -
0%
100%RecycledMaterial
100%RecycledMaterial
18
19
durapol
- - - -
NEW
cHAIN LINKINGRigid Durapol Bollards only.
Two lengths of chain are available: 1200mm and 2500mm
Weights:Standard 1200mm: .............0.6 kgStandard 2500mm: ...........1.25 kg
Spiked 1200mm: .................1.0 kgSpiked 2500mm: .................2.1 kg
e management
3
cOLOuRS
black millstone sandstone granite aircraft grey stone
dark bluewhite green terracotta brown
BANDING/SIGNSretroreflective
bands body sleeve personalised colouredband
sign face
bands body sleeve
red/white split, red or white yellow
chain linking decorativecOLOuRS
--
- - - - - - - -
-
- - - -
-
- - - -
- - - - - - -
- - --
- - - -
- - --
- - - --
= - - - -- stainless steel
Please telephone our sales office for details.
- -
- -
-
- - -
- - - -
- -
-
- - - - - - -
- - - - -
-
- - - - - - -
- - --
- - - - - -
fixing Options
4 Individual product specification sheets are available on request. Please telephone 01253 600410 for details.
oncrete-in Anchor (adjustable depth)Offers additional stability and provides a permanent fixing and reinstated without the need for additional groundwork anywhere a fresh concrete sub-surface can be laid.
4
DimensionsDepth below ground: 250mm.
GroundLevel
elow-Ground Guardsman™ Anti-Ram RaidA galvanised steel reinforcing tube is sited 745mm below groun superb strength and impact resistance. The bollard top is secur hidden coupling bolts.
GroundLevel
745mm
AnchorBar
Hot-DipGalvanisedMild Steel
Reinforcing Tube
DimensionsTotal height of reinforcing tube: 1505mm.Depth below ground: 745mm.Diameter of reinforcing tube: 115mm.Wall thickness of reinforcing tube: 5mm.Weight of reinforcing tube: 21.3kg.
6
*
elow-Ground Socket SystemSocketed bollards are easy to remove and replace, allowing for permanent, semi-permanent or temporary applications. The socket will absorb the impact of most collisions, leaving the surrounding surfaces undamaged.
DimensionsDepth below ground: 500mm.Weight of socket: 3.8kg
3
GroundLevel
Twin WallSocket
500mm
7
Dual Purpose Key Blanking Cap
SAfETY NOTIcE If the removal of a bollard creates a safety hazard, we strongly recommend purchase of a socket blanking cap.
elow-Ground Extended BaseThe extended base and horizontal ground peg of the bollard are secured in concrete for permanent installation.
GroundLevel
420mm
HorizontalGround Peg
GroundLevel
290mm
5
Glasdon Manchester + Advanced Neopolitan 150
Lockfast™ Socket SystemThe new LockFast Socket allows quick and easy bollard top replacement, reducing the need for road closure or costly reinstatement. The square shape prevents twisting during a drive-through and is easy to pave around.
DimensionsHeight: 350mmTop: 240 x 240mmBase: 305 x 305mm
Weight of socket: 3.7kgMaterial: Durapol
SAfETY NOTIcE If the removal of a bollard creates a safety hazard, we strongly recommend purchase of a socket blanking cap.
1
tandard Bolt-Down fixing (onto existing concrete foundations) Bolt-down fixings allow a bollard to be quickly and easily installed surfaces without the need for groundwork. Ideal for use where bel possible.
GroundLevel
2
DimensionsDepth below ground: 75mm.
08:00Can be installed in less
than 8 minutes
(Bollard and fixings may differ from illustrations shown.)
350mm
5Individual product specification sheets are available on request. Please telephone 01253 600410 for details.
High Performance MaterialsGlasdon products are manufactured from high performance materials and undergo stringent quality checks to ensure durability and best value. We have accreditation with ISO 9001:2000, underlining our commitment to provide quality products.
Throughout this catalogue reference is made to the following materials:
Durapol® material is a polymer formulated to withstand
extremes of temperature and is impact-tested in our Quality Assurance Laboratory as part of our BS EN ISO 9001:2000 test procedure. Durapol material will not chip or rust, is easy to clean and never needs painting.
Robust Material - Will not chip or rust.
Low Maintenance - No painting required.
colour Moulded Right Through - Scratches will not show.
Tough, Durable construction - Corrosion-free and vandal resistant.
Enviropol®
material is manufactured predominantly from post-consumer plastics. By balancing these uncontaminated recycled waste materials, the result is a remarkably versatile product with many applications and benefits. Enviropol material will not chip or rust, is easy to clean and never needs painting.
(Enviropol Bollards see page 17)
100%RecycledMaterial
Buffer™ material is manufactured from 100% recycled rubber tyres and is pressure
moulded to create a strong, hard-wearing, weatherproof material.
(Buffer Bollards see page 17)100%RecycledMaterial
Grade 316 Stainless Steel is a premium grade, which provides maximum corrosion resistance. It has a highly polished finish, which minimises the adhesion of dirt and moisture, thereby improving its weather-resistance.
(Centrum Bollards see page 19)
Passively SafeImpactapol®
material is a polymer specially developed with enhanced flexibility and extensibility properties offering good recovery performance after vehicular impact. Impactapol material has abrasion resistance, the material will not chip or rust and never needs painting.
Ideal for vulnerable Sites - Where passive safety is imperative.
Reduce Maintenance Budgets - Due to good recovery performance after repeated impacts.
flexibility & Good Recovery Performance - As Impactapol material remains flexible down to -40°C.
Low Maintenance - As no painting required and scratches will not show.
(Glasdon Manchester Bollard Rebound see page 6, Neopolitan 20 Bollard Rebound Model see page 7, Advanced Neopolitan 150 Bollard see page 8, Neopolitan 150 Bollard Rebound Model see page 9, Neopolitan Signhead Bollard Rebound Model see page 10, Jubilee Bollard Rebound Model see page 11, Mini Ensign Bollard Rebound Model see page 12, Admiral Bollard Rebound Model see page 14, Victory Bollard Rebound Model see page 15, Rebound Signmaster Bollard see page 18).N.B. Impactapol material bollards are only available with selected fixing options.
(Glasdon Manchester Bollard see page 6, Neopolitan 20 Bollard see page 7, Infomaster see page 10, Neopolitan 150 Bollard see page 10, Neopolitan Signhead Bollard see page 10, Jubilee Bollard see page 11, Mini Ensign Bollard see page 12, Ensign Bollard see page 13, Admiral Bollard see page 14, Victory Bollard see page 15, Clifton Bollard see page 15, Edgemaster 20 Bollard see page 16, Edgeliner Bollard see page 16).
6 Order now by telephone 01253 600410 or fax 01253 792558.
Design features• Two models available, rigid Standard model or flexible Rebound model.• LockFast Socket System fixing option allows quick and easy bollard top replacement, reducing the need for road closure or costly reinstatement.• Requires minimal maintenance compared to cast iron bollards.
Optional Extras• Blanking Cap – Temporary or Lockable.• Decorative banding in Gold, retroreflective banding in Red and White, Red, White or Yellow.
Materials (Please see page 5 for details.)• Standard model : Durapol (available with Below-Ground Extended Base or LockFast Socket System fixing option).• Rebound model : Impactapol (available with Below-Ground Extended Base or LockFast Socket System fixing option).• LockFast Socket : Durapol.• Retroreflective and Decorative banding: Aluminium backed (Durapol model only). Impactalight microprismatic retroreflective material (Rebound model only).
fixing Options (Please see page 4 for details.)• Below-Ground Extended Base.• Below-Ground LockFast Socket System.
Glasdon Manchester™
Robust, traditional bollard.
Specifications SAFETY NOTICE – if removal of the socketed bollard creates a safety
hazard, we recommend purchase of a socket blanking cap. please see page 5.
DimensionsHeight above ground: 1005mmOverall height: 1302mmDepth below ground: 290mm (concrete-in) 350mm (with socket)Maximum diameter: 220mmStandard Bollard Weight: 3.5kgRebound Bollard Weight: 4kgSocket Weight: 3.7kg
colour
Black
Glasdon Manchester Optional Banding
780m
m 902m
m
1005
mm
Band WidthBand Width
Band Width
Band Width
12
12
12
63
A+B. 1, 2 or 3 x 12mm and/or 1 x 63mm Gold decorative bands. C+D. 1, 2 or 3 x 12mm and/or 1 x 63mm Red/White retroreflective# bands.E. 1, 2 or 3 x 12mm and/or 1 x 63mm Red retroreflective# bands.F. 1, 2 or 3 x 12mm and/or 1 x 63mm White retroreflective# bands.G. 1, 2 or 3 x 12mm and/or 1 x 63mm Yellow retroreflective# bands.
A. B. C. D. E. F. G.
NEW
lRebound Mod l
Available
&
l for Safer Route
personaCo-ordinating street
furniture also available
0 :00
7Individual product specification sheets are available on request. Please telephone 01253 600410 for details.
Neopolitan™ 20 A contemporary style bollard for modern urban environments
Neopolitan 20 Optional Banding
A. 2 x 20mm Red/White retroreflective bands.#
B. 2 x 20mm Red retroreflective bands.#
C. 2 x 20mm White retroreflective bands.#
D. 2 x 20mm Yellow retroreflective bands.#
E. 1 x 500mm x 485mm Red/White body sleeve#. (3 x 150mm bands are available for use with Rebound model.)
F. 1 x 500mm x 485mm Yellow body sleeve.#
G. 2 x 20mm Gold decorative bands.
A. B. C. D. E. F. G.
DimensionsHeight above ground: 925mm.Main stem diameter: 150mm.Maximum diameter: 200mm. Weight:Standard Bolt Down Bollard (Excluding Fixings): 3.5kgConcrete-In Anchor Bollard (Excluding Fixings): 3.5kg Below Ground Socket System Bollard (Excluding Socket): 5kg Below Ground Guardsman Bollard (Excluding Fixings): 3.5kg Below Ground Extended Base Bollard: 5kg
Band Width
Design features• Two models available, rigid Standard model and flexible Rebound model.• Recessed areas for decorative or retroreflective banding.
Optional Extras• Blanking cap.• Decorative banding in Gold, retroreflective banding in Red, White, Red and White or Yellow.
• Chain linking - please see page 3 for details (available with Durapol Bollards only).
Materials (Please see page 5 for details.)• Standard model : Durapol (available with Standard Bolt-Down, Concrete-In Anchor (adjustable depth), Below-Ground Socket System or Below-Ground Guardsman Anti-Ram Raid fixing options).
• Rebound model : Impactapol (available with Below-Ground Extended Base fixing option).
fixing Options (Please see page 4 for details.)• Standard Bolt-Down.• Concrete-In Anchor (adjustable depth).• Below-Ground Socket System.• Below-Ground Guardsman Anti-Ram Raid.• Below-Ground Extended Base.
Black NEOPOLITAN 20 Bollards with Red retroreflective bands.
Millstone NEOPOLITAN 20 Bollards with decorative Gold bands and co-ordinating PLAZA® Litter Bin.
NEOPOLITAN 20 Bollard Rebound model made from totally flexible Impactapol material.
Black NEOPOLITAN 20 Bollards with Guardsman anti-ram raid fixing.
*Black SandstoneMillstone
Aircraft Grey
*WhiteStone
colours
*Rebound model available in Black or White only.
Dark Blue
Specifications SAFETY NOTICE - If removal of the socketed bollard creates a safety hazard, we recommend purchase of a Socket Blanking Cap. Please see page 5.
Impactalight™ impact-resistant retroreflective banding is available with Rebound model.
Available as a Gu rdsman
Anti-Ram Raid Bol ardRebound M d l
Ava la le
& able as a Gua d
am Raid B
Ideal for Sa er Routes toSchool person lisation
Co-ordinating streetfurniture also available
08
#All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1 2007 Fixed Vertical Road Signs.
8Order now by telephone 01253 600410 or fax 01253 792558.
#All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1 2007 Fixed Vertical Road Signs.
NEW
The Glasdon Neopolitan 150 Bollard Rebound Model is now available with a Lockfast™ Socket to save you time and money!
Advanced Neopolitan™ 150
Design features• One model available, flexible rebound model (choice of two fixing options).• LockFast Socket allows quick and easy bollard top replacement, reducing the need for road closure or costly reinstatement.• Tamper proof lock prevents unauthorised removal of the bollard.• Shallow depth installation.
Optional Extras• Blanking cap – Temporary or Lockable.• Retroreflective banding in Red and White, Red, White or Yellow.• Personalisation – please see back page for details.
Materials (Please see page 5 for details.)• Bollard: Impactapol.• LockFast Socket: Durapol.• Banding: Impactalight™ Microprismatic Retroreflective material.
fixing Options (Please see page 4 for details.)• Below-Ground LockFast Socket System.• Below-Ground Extended Base.
Specifications SAFETY NOTICE – If removal of the socketed bollard creates a safety hazard, we recommend purchase of a Socket Blanking Cap. Please see page 5.
DimensionsHeight above ground: 925mmMaximum stem diameter: 200mmDepth below ground: 290mm (concrete-in) 350mm (with socket)Bollard Weight: 4kgLockFast Socket Weight: 3.7kg
Band Width
Band Width
A. B. C. D.
Advanced Neopolitan 150 Optional Banding
A. 2 x 40mm and 2 x 150mm Red/White retroreflective# bands.
B. 2 x 40mm and 2 x 150mm Red retroreflective# bands.
c. 2 x 40mm and 2 x 150mm White retroreflective# bands.
D. 2 x 40mm and 2 x 150mm Yellow retroreflective# bands.150mm band is idea for personalisation with your crest, logo or message.
Black White
colours
& la
A ti am Rai Bo lardund va lable
Bo 8 inutes
Co-ordinating streetfurniture also available
08 0
Rebound Model Only
Band Width
Band Width
1005mm
300mm Neopolitan 150 Optional Banding
A. 1 x 20mm and 1 x 150mm Red/White retroreflective bands.#
B. 1 x 20mm and 1 x 150mm Red retroreflective bands.#
C. 1 x 20mm and 1 x 150mm White retroreflective bands.#
D. 1 x 20mm and 1 x 150mm Yellow retroreflective bands.#
E. 1 x 500mm x 485mm Red/White body sleeve.# (3 x 150mm bands are available for use with Rebound model.)
F. 1 x 500mm x 485mm Yellow body sleeve.#
G. 1 x 20mm and 1 x 150mm decorative bands. 150mm band is ideal for personalisation with your crest, logo or message.
A. B. C. D. E. F. G.
*Black SandstoneMillstone
Aircraft Grey
*WhiteStone
colours
*Rebound model available in Black or White only.
Dark Blue
Specifications SAFETY NOTICE - If removal of the socketed bollard creates a safety hazard, we recommend purchase of a Socket Blanking Cap. Please see page 5.
DimensionsHeight above ground: 925mm.(Standard Bolt-Down Fixing Model and Concrete-In Anchor Model: 1005mm)Main stem diameter: 150mm.Maximum diameter: 200mm.Weight:Standard Bolt Down Bollard (Excluding Fixings): 4.5kg Concrete-in Anchor Bollard (Excluding Fixings): 4.5kgBelow Ground Socket System Bollard (Excluding Socket): 5kg Below Ground Guardsman Bollard (Excluding Fixings): 3.5kg Below Ground Extended Base Bollard: 5kg
Impactalight impact-resistant retroreflective banding is available with Rebound model.
9Individual product specification sheets are available on request. Please telephone 01253 600410 for details.
#All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1 2007 Fixed Vertical Road Signs.
Neopolitan™ 150 A contemporary style bollard for modern urban environments
A ailable as Gua dsman
An i-Ram Raid BollardRebound Mod
Ava l b eBolt-Down n under
8 Mi utes
08:00 & lable as Guard
am Raid Rebound Model
Available
Ideal for Safer Routes toSchool personalisation
Co-ordinating streetfurniture also available
0 :00
Black NEOPOLITAN 150 Bollard with split Red/White retroreflective bands.
Sandstone NEOPOLITAN 150 Bollard with personalised band.
Black NEOPOLITAN 150 Bollard with White retroreflective bands.
NEOPOLITAN 150 Bollard Rebound model made from totally flexible Impactapol material.
Millstone NEOPOLITAN 150 Bollards with Red retroreflective bands.
Standard features• Two models available, rigid Standard model and flexible Rebound model.• Recessed areas for decorative or retroreflective banding.
Optional Extras• Blanking cap.• Decorative banding in Gold, retroreflective banding in Red, White, Red and White or Yellow.
• Personalisation - please see back page for details.• Chain linking - please see page 2 for details (available with Durapol Bollards only).
Materials (Please see page 5 for details.)• Standard model : Durapol (available with Standard Bolt-Down, Concrete-In Anchor (adjustable depth), Below-Ground Socket System or Below-Ground Guardsman Anti-Ram Raid fixing options).
• Rebound model : Impactapol (available with Standard Bolt Down, Concrete-In Anchor (adjustable depth) or Below-Ground Extended Base fixing options).
fixing Options (Please see page 4 for details.)• Standard Bolt-Down.• Concrete-In Anchor (adjustable depth).• Below-Ground Socket System.• Below-Ground Guardsman Anti-Ram Raid.• Below-Ground Extended Base.
10Order now by telephone 01253 600410 or fax 01253 792558.
#All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1 2007 Fixed Vertical Road Signs.
Neopolitan Signhead™ A stylish, slimline, sign-carrying bollard
DimensionsHeight above ground: 1075mm. (Standard Bolt-Down Fixing Model and Concrete-In Anchor Model: 1156mm)Main stem diameter: 150mm.Maximum diameter: 200mm.Signface: 210mm x 125mm.Weight:Standard Bolt Down Bollard (Excluding Fixings): 5kg
Concrete-in Anchor Bollard (Excluding Fixings): 5kgBelow Ground Socket System Bollard (Excluding Socket): 5kg Below Ground Guardsman Bollard (Excluding Fixings): 3.2kg Below Ground Extended Base Bollard: 5kg
Specifications SAFETY NOTICE - If removal of the socketed bollard creates a safety hazard, we recommend purchase of a Socket Blanking Cap. Please see page 5.
Black NEOPOLITAN SIGNHEAD Bollard with sign displaying End of area where vehicles may be parked partially on verge or footway.
Please contact our sales office for details on sign options
300mm
20mm Band Width
20mm Band Width
1075mm
14
1156mm
Design features• Two models available, rigid Standard model and flexible Rebound model.• Recessed area for 210mm x 125mm rectangular signface. • Recessed areas for decorative or retroreflective banding.
Optional Extras• Blanking cap.• Decorative banding or retroreflective banding.
• Rectangular signs.• Non-standard signface options.• Personalisation - please see back page for details.
Materials and fixing Options (Please see pages 4-5 for details.)• Standard model : Durapol (available with Standard Bolt-Down, Concrete-In Anchor (adjustable depth), Below-Ground Socket System or Below-Ground Guardsman Anti-Ram Raid fixing options).
• Rebound model : Impactapol (available with Standard Bolt Down, Concrete-In Anchor (adjustable depth) or Below-Ground Extended Base fixing options).
*Rebound model available in Black or White only.
*Black Millstone
Aircraft Grey
*WhiteStone
colours
Sandstone
Dark Blue
Impactalight impact-resistant retroreflective banding is available with Rebound model.
& Available as a Guardsman
Anti Ram Ra d Bo lardRebound Model
Availab eBolt Down In under
8 MinutesIdeal for Safer Routes oSchool persona isa ion
Co ord nating st eetfurn ture also ava lab e
08:00
Infomaster™ The ideal way to display the 661A Regulatory ‘Disabled Badge Holders Only’ sign
Specifications
Design features• Rigid Durapol® construction.• Recessed area for 308mm x 248mm polycarbonate sign face.
Optional Extras• Blue side reflectors.• Wall mounting plaque.• Non-standard sign options.• Personalistaion – please see back page for details.
Materials and fixing Options (Please see page 4 for details.) • Standard model : Durapol (available with Standard Bolt-Down or Below-Ground Guardsman Anti-Ram Raid fixing options).• Rebound model : Impactapol (available with Standard Bolt Down fixing option).
fixing Options:• Standard Bolt-Down Fixing.• Concrete-in Anchor (Adjustable Depth).
DimensionsHeight: 1195mm.Width: 370mm.Depth: 171mm.Weight: 6kg.Signface: 308mm x 248mm.
Black Millstone
colours
Bolt-Down In under
8 Minutes
08:00
370mm
1195mm
NEW
11Individual product specification sheets are available on request. Please telephone 01253 600410 for details.
jubilee Optional BandingA. 4 x 12mm and/or 1 x 27mm Red/White
retroreflective bands.#
B. 4 x 12mm and/or 1 x 27mm Red retroreflective bands.#
C. 4 x 12mm and/or 1 x 27mm White retroreflective bands.#
D. 1 x 600mm x 580mm Red/White body sleeve, 4 x 12mm and 1 x 27mm retroreflective bands.# (Reflectorised Body Kits also available which include banding and full body sleeve.)
E. 1 x 600mm x 580mm Yellow body sleeve, 4 x 12mm and 1 x 27mm retroreflective bands.# (Reflectorised Body Kits also available which include banding and full body sleeve.)
F. 4 x 12mm Gold decorative bands.
A. B. C. D. E. F.
DimensionsHeight above ground: 942mm.Depth below ground: 500mm.Main stem diameter: 180mm.Maximum diameter: 190mm.Standard Bollard weight: 5.00kg.Socket weight: 3.8kg.Combined weight: 8.8kg.
colour*
Black JuBILEE Bollard with decorative Gold bands.
Black JuBILEE Bollards with decorative Gold bands.
Black JuBILEE Bollards with decorative Gold bands.
27mm Band Width
12mm Band Width
Design features• Two models available, rigid Standard model and flexible Rebound model.• Recessed areas for decorative or retroreflective banding.
Optional Extras• Decorative banding in Gold, retroreflective banding in Red, White, Red and White or Yellow.• Chain linking - please see page 3 for details.
Materials (Please see page 5 for details.)• Standard model: Durapol.• Rebound model: Impactapol.
fixing Options (Please see page 4 for details.)• Standard model : Below-Ground Socket System.• Rebound model : Below-Ground Extended Base.
jubilee™ A classically styled bollard with multiple banding options
* Other colours are available subject to a minimum order quantity. Please telephone our Sales Office for details.Black
Specifications SAFETY NOTICE - If removal of the bollard creates a safety hazard, we recommend purchase of a Socket Blanking Cap. Please see page 5.
Now also available as a
flexible Rebound model
&
C - rdinating st eet
fu itur also avai able
ailable as a Gua dsm
Anti-Ram Raid BollardRebound Model
Available
12Order now by telephone 01253 600410 or fax 01253 792558.
#All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1 2007 Fixed Vertical Road Signs.
Mini Ensign™ A compact sign carrying bollard with a modern, neat appearance
Red MINI ENSIGN Bollard with No Swimming sign.
MINI ENSIGN Bollard Rebound model made from totally flexible Impactapol material.
Black MINI ENSIGN Bollard with Disabled sign.
SAFETY NOTICE - If removal of the socketed bollard creates a safety hazard, we recommend purchase of a Socket Blanking Cap. Please see page 5.
Ensign & Mini Ensign Optional Banding
A. B. C. D. E. F. G.
A. 2 x 20mm Red/White retroreflective bands.#
B. 2 x 20mm Red retroreflective bands.#
C. 2 x 20mm White retroreflective bands.#
D. 2 x 20mm Yellow retroreflective bands.#
E. 1 x 500mm x 485mm Red/White body sleeve.# (3 x 150mm bands are available for use with Mini Ensign Bollard
Rebound model).
F. 1 x 500mm x 485mm Yellow body sleeve.#
G. 2 x 20mm Gold decorative bands.
300mm
1010mm 1087mm
20mm Band Width
20mm Band Width
The Ø300mm and Ø150mm signs are also suitable for personalisation with your safer routes to school logo, or any other crest, logo or message. Please telephone 01253 600410 for more information.
Ensign Bollard also takes two Ø150mm signs.
LOOKLEFT
Ensign Bollard also takes two 210mm x 125mm
signs.
Mini Ensign Specifications
Sandstone MINI ENSIGN Bollard with Safer Routes to School logo.
Design features• Two models available, rigid Standard model and flexible Rebound model.
• Two recessed areas for two x Ø150mm signfaces. • Recessed areas for decorative or retroreflective banding.
Optional Extras• Blanking cap.• Decorative banding in Gold, retroreflective banding in Red, White, Red and White or Yellow.
• Sign options.• Personalisation - please see back page for details.
Materials (Please see page 5 for details.)• Standard model : Durapol (available with Standard Bolt-Down, Concrete-In Anchor (adjustable depth), Below-Ground Socket System or Below-Ground Guardsman Anti-Ram Raid fixing options).
• Rebound model : Impactapol (available with Standard Bolt Down, Concrete-In Anchor (adjustable depth) or Below-Ground Extended Base fixing options).
fixing Options (Please see page 4 for details.)• Standard Bolt-Down.• Concrete-In Anchor (adjustable depth).• Below-Ground Socket System.• Below-Ground Guardsman Anti-Ram Raid.• Below-Ground Extended Base.
*Black SandstoneMillstone
Aircraft Grey
*WhiteStone
colours
*Rebound model available in Black or White only. **Minimum order quantity applies.
Dark Blue
Red**
Impactalight impact-resistant retroreflective banding is available with Mini Ensign Bollard Rebound model.
DimensionsHeight above ground: 1010mm.(Standard Bolt-Down Fixing Model and Concrete-In Model: 1087mm)Main stem diameter: 150mm.Maximum diameter: 200mm.Signface diameter: 150mm.Weight:Standard Bolt Down Bollard (Excluding Fixings): 4.8kg Concrete-in Anchor Bollard (Excluding Fixings): 4.8kgBelow Ground Socket System Bollard (Excluding Socket): 5kg Below Ground Guardsman Bollard (Excluding Fixings): 3.2kg Below Ground Extended Base Bollard: 5kg
& Available as a Guardsman
Anti-Ram Raid BollardRebound Model
AvailableBolt-Down In under
8 MinutesIdeal for Safer Routes toSchool personalisation
Co-ordinating streetfurniture also available
08:00
13Individual product specification sheets are available on request. Please telephone 01253 600410 for details.
#All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1 2007 Fixed Vertical Road Signs.
Ensign™ Accommodates 300mm diameter signs, ideal for many applications
SAFETY NOTICE - If removal of the bollard creates a safety hazard, we recommend purchase of a Socket Blanking Cap. Please see page 5.
Ensign (Ø300mm & Ø150mm) & Mini Ensign (Ø150mm) Sign Options1 2 3
5 10Ref 616
Ref 9519
Ref 606L
Ref 955 Ref 956Ref 610L
Ref 957
Ref 2610.2
Ref 670Ref 670
Ref 613
1413
11 12
4 5 6
7 8
10
Ref 833 Ref 834
Black ENSIGN Bollard with Keep Left sign.
Standard Price Sign Options Ø300mm Ø150mm1. Max. Speed Limit (5mph) -2. Max. Speed Limit (10mph) -3. No Entry -4. No Left Turn -5. Cycles Prohibited -6. Turn Left -7. Keep Left -8. Cycle Route
9. Cycle/Pedestrians Only
10. Cycle/Pedestrians Only "Route Marked"
11. In* -12. Out* -13. Waymark
14. Disabled Sign
Design features• One model available, rigid Standard model.• Option to carry up to four signs. Two x Ø300mm main signfaces plus additional areas on the sides for two x Ø150mm or two 210mm x 125mm signs.
• Recessed areas for decorative or retroreflective banding.
Optional Extras• Blanking cap.• Decorative banding in Gold, retroreflective banding in Red, White, Red and White or Yellow.• Sign options.• Personalisation - please see back page for details.
Material (Please see page 5 for details.)• Durapol.
fixing Options (Please see page 4 for details.)• Standard Bolt-Down.• Concrete-In Anchor (adjustable depth).• Below-Ground Socket System.• Below-Ground Guardsman Anti-Ram Raid.
Millstone ENSIGN Bollards with pedestrian crossing sign.
Non-Standard Price Sign Options Ø300mm Ø150mmMinimum order quantity applies. Please contact our Sales Office for these and other sign requirements on 01253 600410.15. Pedestrian Crossing* - 16. Mini Roundabout* - 17. Delivery Point - 18. No Swimming - 19. No Swimming (text) - 20. Beware Deep Water -
* For use on the public highway these options require prior approval from the DfT. All other standard options conform fully with the TSRGD. Please contact our Sales Office for further details of sign options.
Aircraft Grey ENSIGN Bollards with personalised sign.
Ensign Specifications
DimensionsHeight above ground: 1120mm. (Standard Bolt-Down Fixing Model and Concrete-In Model: 1206mm)Diameter at base: 200mm.Main stem diameter: 150mm.Maximum width: 338mm.Signface diameter: 300mm.Weight:Standard Bolt Down Bollard (Excluding Fixings): 6kg Concrete-in Anchor Bollard (Excluding Fixings): 6kgBelow Ground Socket System Bollard (Excluding Socket): 7.2kg Below Ground Guardsman Bollard (Excluding Fixings): 3.9kg
300mm
1120mm 1206mm
20mm Band Width
20mm Band Width
Black SandstoneMillstone
Aircraft Grey
WhiteStone
colours
Dark Blue
1 2 3
15
7f 6
16 17
18 19 20
NoSwimming
BewareDeep Water
Ref 611.1
Bolt Down I under
8 Minutes
08:00 & Available as a Guardsman
Anti-Ram Raid BollardRebound Model
Available
Ideal for Safer Routes toSchool personalisation
Co-ordinating streetfurniture also available
14Order now by telephone 01253 600410 or fax 01253 792558.
#All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1 2007 Fixed Vertical Road Signs.
DimensionsHeight above ground: 936mm. Depth below ground: 500mm.(Below-Ground Extended Base Model: 300mm)Main stem diameter: 198mm.Standard Bollard (including Socket) weight: 8.9kg.Standard Bollard weight: 5.1kg.Socket weight: 3.8kg.Rebound Bollard weight: 4kg.
80mm band width
150mm band width
936mm
Admiral Optional BandingA. 1 x 80mm Red/White retroreflective band.#
B. 1 x 80mm Red retroreflective band.#
C. 1 x 80mm White retroreflective band.#
D. 1 x 80mm Yellow retroreflective band.#
E. 1 x 150mm Red/White retroreflective band.# **
F. 1 x 80mm Yellow decorative band.
G. 1 x 80mm Brown decorative band.H. 1 x 80mm Green decorative band.I. 1 x 80mm Silver decorative band.
** Available with Admiral Rebound Bollard only.A. B. C. D. E.
F. G. H. I.
Design features• Two models available, rigid Standard model (to take 80mm banding) or flexible Rebound model (Junction Marker) (to take 150mm banding).
• Recessed area for decorative or retroreflective banding.
Optional Extras• Decorative banding in Yellow, Brown, Green or Silver, retroreflective banding in Red, White, Red and White or Yellow.
• Chain linking - please see page 3 for details (available with Durapol Bollards only).• Personalisation - please see back page for details.
Materials (Please see page 5 for details.)• Standard model : Durapol - textured finish (available with Below-Ground Socket System). • Rebound model : Impactapol - smooth finish (available with Below-Ground Extended Base).
fixing Options (Please see page 4 for details.)• Standard model : Below-Ground Socket System. • Rebound model : Below-Ground Extended Base.
Admiral™ Two robust bollards
colours
SandstoneMillstone
Aircraft Grey
*WhiteStone
Rebound Model
*Admiral Rebound Bollard available in Black or White only.
(Non-standard colours are subject to a minimum order quantity.)
Standard Model
Specifications SAFETY NOTICE - If removal of the bollard creates a safety hazard, we recommend purchase of a Socket Blanking Cap. Please see page 5.
Aircraft Grey Standard model ADMIRAL Bollard with 80mm White retroreflective band.
Stone Standard model ADMIRAL Bollard with 80mm Green decorative band.
Black Standard model ADMIRAL Bollard with 80mm Red retroreflective band.
Impactalight impact-resistant retroreflective banding is available with all Rebound models.
*Black
&
Co ordinating str et
fu iture a so avail bl
aila le as a Guardsm
Anti-Ram Raid BollardRebound Model
Available
15Individual product specification sheets are available on request. Please telephone 01253 600410 for details.
#All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1 2007 Fixed Vertical Road Signs.
DimensionsHeight above ground: 967mm.Depth below ground: 500mm.(Below-Ground Extended Base Model: 420mm)Maximum diameter: 200mm.Standard Bollard weight: 5.00kg.Socket weight: 3.8kg. Standard Bollard (including socket) weight: 8.8kg.Rebound Bollard weight: 4.5kg.
Black
colour
victory Optional BandingA. 1 x 20mm and/or 1 x 38mm and/or 1 x 125mm Red/White retroreflective bands.#
B. 1 x 20mm and/or 1 x 38mm and/or 1 x 125mm Red retroreflective bands.#
C. 1 x 20mm and/or 1 x 38mm and/or 1 x 125mm White retroreflective bands.#
D. 1 x 125mm Yellow retroreflective band.#
E. 1 x 20mm and/or 1 x 38mm Gold decorative bands and/or 1 x 125mm decorative bands. 125mm band is ideal for personalisation with your crest, logo or message.
Black VICTORY Bollards with decorative Gold bands.
Design features• Two models available, rigid standard model or flexible Rebound model.• Recessed areas for decorative or retroreflective banding.
Optional Extras• Aluminium backed and riveted decorative Gold bands.• Retroreflective banding in Red, White, Red and White or Yellow.• Personalisation - please see back page for details.• Chain linking - please see page 3 for details (available with Durapol Bollards only).
Materials (Please see page 5 for details.)• Standard model : Durapol (available with Below-Ground Socket System fixing option). • Rebound model : Impactapol - smooth finish (available with Below-Ground Extended Base fixing option).
fixing Options (Please see page 4 for details.)• Below-Ground Socket System. • Below-Ground Extended Base.
victory™ A heritage, cannon style bollard
Specifications SAFETY NOTICE - If removal of the bollard creates a safety hazard, we recommend purchase of a Socket Blanking Cap. Please see page 5.
Design features• Recessed areas for decorative or retroreflective banding.• Moulded-in decorative crest detail.
Optional Extras• Decorative banding in Gold, retroreflective banding in Red, White, Red and White or Yellow.
• Personalised moulded-in crest detail.• Personalisation - please see back page for details.
Material (Please see page 5 for details.) • Durapol. fixing Options (Please see page 4 for details.)• Below-Ground Socket System.
clifton™ A heritage style four-sided bollard with crest detail
Black CLIFTON Bollard with Red retroreflective bands.
Specifications SAFETY NOTICE - If removal of the bollard creates a safety hazard, we recommend purchase of a Socket Blanking Cap. Please see page 5.
DimensionsHeight above ground: 925mm.Depth below ground: 500mm.Main stem width: 140mm.Maximum width: 200mm.Bollard weight: 5.00kg.Socket weight: 3.8kg.Combined weight: 8.8kg.
colour* * Other colours are available subject to a minimum order quantity. Please telephone our Sales Office for details.
12mm Band Width
100mm12mm Band Width
925mm
A. B. C. D. E.
clifton Optional BandingA. 4 x 12mm and/or 1 x 100mm Red/White retroreflective bands.#
B. 4 x 12mm and/or 1 x 100mm Red retroreflective bands.#
C. 4 x 12mm and/or 1 x 100mm White retroreflective bands.#
D. 4 x 12mm and/or 1 x 100mm Yellow retroreflective bands.#
E. 4 x 12mm Gold decorative bands and/or 1 x 100 mm decorative bands. 100mm band is ideal for personalisation with your crest, logo or message.
Black CLIFTON Bollard with decorative Gold bands and co-ordinating STANFORD™ Litter Bin and STANFORD Seat.
A. B. C. D. E.
125mm Band Width
38mm Band Width
20mm Band Width
Black VICTORY Bollards with retroreflective bands.
lRebound Mod l
Available
&
al for Safer Rout
personaCo-ordinating street
furniture also available
&
Ideal for Safer Routes toSchool personalisation
Co-ordinating streetfurniture also available
16Order now by telephone 01253 600410 or fax 01253 792558.
#All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1 2007 Fixed Vertical Road Signs.
SpecificationsDimensionsHeight above ground: 510mm.Depth below ground: 276mm.Main stem diameter: 120mm.Maximum diameter: 140mm.Weight: 1.3kg.
colours
Black Millstone Sandstone WhiteGranite
A. B. C. D. E. F.
Edgeliner Optional BandingA. 1 x 19mm Red/White retroreflective band.#
B. 1 x 19mm Red retroreflective band.#
C. 1 x 19mm White retroreflective band.#
D. 1 x 98mm Red retroreflective band.#
E. 1 x 98mm White retroreflective band.#
F. 1 x 19mm Gold decorative band.
98mm Band Width
19mm Band Width
510m
mDesign features• Recessed area for decorative or retroreflective banding. (Non Highways Use).
Optional Extras• Decorative banding in Gold, retroreflective banding in Red, White, Red and White.
• Chain linking - please see page 3 for details.• Personalisation - please see back page for details.
Material (Please see page 5 for details.)• Durapol.
fixing Options (Please see page 4 for details.)• Below-Ground Extended Base.
Edgeliner™ Durable mini bollard that has the edge on ordinary posts!
White EDGELINER Bollard.Millstone EDGELINER Bollard with decorative Gold bands.
SpecificationsDimensionsOverall Height: 800mm.Height above ground: 490mm.Depth below ground: 310mm.Width: 105mm.Weight: 0.6kg.
colour
White
A. B. C. D. E. F.
Edgemaster 20 Optional BandingA. 1 x 20mm Red decorative band.B. 1 x 20mm Blue decorative band.C. 1 x 20mm Green decorative band.D. 1 x 20mm Yellow decorative band.E. 1 x 20mm Black decorative band.F. 1 x 20mm Retroreflective band*.
Design features• Recessed area for decorative or retroreflective banding (Non Highways Use).
• A Ground Level Marker helps to ensure the bollard is installed at the correct depth.
Optional Extras• Decorative banding in Red, Blue, Green, Yellow and Black.• Ground Fixing Peg.Ground Fixing PegA Ground Fixing Peg can be attached to the base of the bollard, if preferred. The peg acts like an anchor, to provide secure installation and add even greater strength and impact-resistance. Bollards installed in very soft earth may benefit from the extra stability the peg provides.
Material (Please see page 5 for details.)• Durapol.
fixing Options (Please see page 4 for details.)• Below-Ground Extended Base.• Below-Ground Extended Base with Ground Fixing Peg.
Edgemaster™ 20 An attractive bollard to protect grass verges from vehicle damage
White EDGEMASTER 20 Bollard.
490mmHeight above ground
310mmDepth below ground
800mmOverall Height
20mm Band Width
White EDGEMASTER 20 Bollard.
*Please telephone our sales office on 01253 600410 if retroreflective banding is required.
&
Co-ordinating street
furniture also available
&
Co-ordinating street
furniture also available
08: 0
17
Design features• Flat or round top model.• Recessed area for decorative or retroreflective banding.
Optional Extras• Decorative banding in Yellow, Green or Silver, retroreflective banding in Red, White or Red and White.
• Personalisation - please see back page for details.
Material (Please see page 5 for details.)• Enviropol Recycled Material.
fixing Options (Please see page 4 for details.)• Below-Ground Extended Base.
Enviropol® Two bollards manufactured entirely from recycled materials
Black Round Top ENVIROPOL Bollards with White retroreflective band.
Black Flat Top ENVIROPOL Bollard with Red retroreflective band.
Design features• Reinforcing tube, above which bollard is flexible, yet resilient.• Available in two heights 600mm or 900mm.• Recessed area for decorative or retroreflective banding.
Optional Extras• Decorative banding in Gold, retroreflective banding in Red, White, Red and White or Yellow.
• Personalisation - please see back page for details.
Materials (Please see page 5 for details.)• Buffer Bollard - Recycled Rubber Material. • Reinforcing Tube - Galvanised Mild Steel.
fixing Options (Please see page 4 for details.)• Standard Bolt-Down.• Concrete-In Anchor (adjustable depth).• Below-Ground Extended Base.
Buffer™ Two impact-absorbing recycled rubber safety bollards
Specifications
A. 1 x 80mm Red/White retroreflective band.#
B. 1 x 80mm Red retroreflective band.#
C. 1 x 80mm White retroreflective band.#
D. 1 x 80mm Yellow decorative band.E. 1 x 80mm Green decorative band.F. 1 x 80mm Silver decorative band.
Dimensions Flat Top Round Top Model ModelHeight above ground: 1000mm. 1000mm.Depth below ground: 500mm. 500mm.Maximum Diameter: 150mm. 150mm.Bollard weight: 20kg. 23kg.
Personalisation Enviropol Bollard banding is ideal for personalisation with your crest, logo or message. Other colours are available to match your particular scheme, subject to a minimum order quantity. Black Dark
Brown
colours
A. B. C. D. E. F.
100% recycled material
80mm Band Width
Round Top Model
80mmBandWidth
flat Top Model
Enviropol Optional Banding
Specifications
900mm Black BuFFER Bollard with White retroreflective band.
DimensionsHeight: 600mm & 900mm.Weight: 25kg (600mm) & 36kg (900mm).(c/w below-ground fixing reinforcing tube.)Max Diameter: 250mm.
Black Green Terracotta
colours
A. B. C. D. E.
Absorbs the impact of accidental
parking nudges.
(Dia.)
(Dia.)
900mm 600mm
300mmReinforcingTube
300mmReinforcingTube
900mm Height 600mm Height
600mm Black BuFFER Bollards with Red/White retroreflective band.
100% recycled material
Buffer Optional Banding
A. 1 x 75mm Red/White retroreflective band.#
B. 1 x 75mm Red retroreflective band.#
C. 1 x 75mm White retroreflective band.#
D. 1 x 75mm Yellow retroreflective band.#
E. 1 x 75mm Gold decorative band. Also ideal for personalisation with your crest, logo or message.
Individual product specification sheets are available on request. Please telephone 01253 600410 for details.
& vai ab e s a G ardsman
Ideal fo
Co-ordinating street
furniture also available
18Order now by telephone 01253 600410 or fax 01253 792558.
A. B. C.
DimensionsHeight above ground: 1036mm.Maximum bollard width: 400mm.Maximum bollard depth: 200mm. Bolt-Down foot detail: 328 x 328mm.Signface: 300mm diameter.Front/rear patch area: 0.1617m2.Side patch area: 0.0243m2. Weight: 6kg.
Black REBOuND SIGNMASTER Bollard.Design features• One model available, flexible rebound model. • Recessed areas for retroreflective side and front panels. • Two recessed areas for two x Ø300mm signfaces.
Optional Extras• Fluorescent Yellow retroreflective front, back and side panels.• Sign options for highways use.• Other sign options available.
Material (Please see page 5 for details.)• Impactapol.
fixing Options (Please see page 4 for details.)• Standard Bolt-Down. • Concrete-In Anchor (adjustable depth).
Rebound Signmaster™ Sign carrying bollard
Specifications
White REBOuND SIGNMASTER Bollard.
REBOuND SIGNMASTER Bollard with 1 x retroreflective front panel and 4 x retroreflective side panels.REBOuND SIGNMASTER
Bollard is made from totally flexible Impactapol material.
610 610 611 Blank Wh te
5 10* * * *
* * * ** *
* *
1036mm
Rebound Signmaster Optional Banding A. 1 x Fluorescent Yellow retroreflective front panel, 2 x Fluorescent Yellow retroreflective side
panels.
B. 1 x Fluorescent Yellow retroreflective front panel, 4 x Fluorescent Yellow retroreflective side panels.
C. 1 x Fluorescent Yellow retroreflective front panel, 1 x Fluorescent Yellow retroreflective back panel, 4 x Fluorescent Yellow retroreflective side panels.
Black Aircraft GreyWhite
colours
Sign Options for use on Highways
Other Sign Options
Rebound Signmaster has the option to carry 1 or 2 signs.
* Minimum order quantity applies. Please contact our sales office for these and other sign requirements.
Rebound
Signmaster is
now available
as an LED-
illuminated
model. Please
telephone our
sales office
for details.
Rebound Model
AvailableBolt-Down In under
8 Minutes
08:00
19
Design features• Five Standard models available, Zone 154mm diameter, Zone 102mm diameter, Linear 1000mm high, Linear 750mm high and Ellipse.
Optional Extras• Decorative banding in Blue, retroreflective banding in Red/White, Red, White or Yellow available on Zone models.
Material• Grade 316 Stainless Steel.
fixing Options • Below-Ground Extended Base.
centrum™ Stainless Steel Bollards
A. B. C. D. E.
centrum Optional Banding (for Zone Models only)A. 3 x 20mm Red/White retroreflective bands.#
B. 3 x 20mm Red retroreflective bands.#
C. 3 x 20mm White retroreflective bands.#
D. 3 x 20mm Yellow retroreflective bands.#
E. 3 x 20mm Blue decorative bands.
DimensionsZone 154mm dia.Diameter: 154mmHeight above ground: 1000mmDepth below ground: 300mmWeight: 11.5kg
Zone 102mm dia.Diameter: 102mmHeight above ground: 1000mmDepth below ground: 300mmWeight: 7.6kg
Linear 1000mm highDiameter: 102mmHeight above ground: 1000mmDepth below ground: 300mmWeight: 6.7kg
Linear 750mm highDiameter: 102mmHeight above ground: 750mmDepth below ground: 300mmWeight: 5.9kg
EllipseDepth: 75mmWidth: 125mmSignface diameter: 125mmHeight above ground: 1000mmDepth below ground: 300mmWeight: 6.5kg
ELLIPSE Oval Bollards with Signface.
ELLIPSE Bollard's round signface can be 'personalised' by an engraving process.
ZONE Domed Top Bollard with 154mm dia.
LINEAR Rounded Top Bollard 750mm high.
More detailed literature available
Specifications
Individual product specification sheets are available on request. Please telephone 01253 600410 for details.#All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1 2007 Fixed Vertical Road Signs.
GR498/00
Personalisation Successful promotion with personalised products
Many Glasdon bollards can be successfully used as a stylish and cost-effective promotional or informative medium by personalising with your name, logo, crest or message e.g. safer routes to school. Subject to a minimum order quantity and your choice of product we can personalise to your individual requirements, giving you a totally unique and distinctive product in your authority/organisation colours.
fREE PERSONALISATION vISuAL fOR YOuR AuTHORITY/ORGANISATIONSee how attractive your logo/crest would look on a Glasdon product. We can provide you with a computer illustration totally free of charge.All you need to do is:1) Select your preferred product(s), e.g. Ensign Bollard (page 13).2) Choose a colour to match your needs, eg. Millstone.3) Send quality colour artwork of your logo/crest, either on disk or as a
print out, ideally A5 size or larger, (please telephone to discuss).
using the latest computer technology, we can then produce a visual showing how your logo would look on the product of your choice. Clifton Neopolitan Enviropol Victory EnsignG as on U K L m tedr s on N w R ad LA K OOL
a c s i e Y4 UL
Tel: 0 25 ) 6 0 11F x: 0 25 ) 92 58e ma : ale @g a d n uk o ukwe : www g a do com© G a d n 20 2
S 80 / R 02 2
S rop h re CCo ou R f r n e:
C i i l f l hi
u l Co ou P oc ss
F ontEl va ion
Ens gn™
Si elevat on
rontE eva on
S deE eva ion
F ontE e at on
S deE ev t on
Individual product specification sheets are available on request. Please phone 01253 600410 for details.
Litter Bins
www.glasdon.com
Fif y Yearsof Progr ss
Spec fications l e As mount
H i 2 mmW h: 5 mm
t : 9 mmL n r c t trWe g t: 2 2kg
3 l re A hmountHe h : 2 mmW dt : 0 mmDe t : 8mmL n r c p c t : trWe g t: 6kg
Ma er a sB se T p nd P ne s G i e Doo : a xL n r Ga v n d s l
Ashmount
De ign Fea ures 2 es a i b e 1 5 tre and 3 tre
u 5 tr c n be w ss or post moun ed nd o ds p to 5 ci are te but s
u tr w l o gla s mou ted and hol s p o 1 05 ci a te but su Wea h r d andal r s sta t
u Va al x * an di ed lumi ium ri es pro ide a he t es s ant s ubbi g a ea
u Qu ck nd asy to i sta l
* V d l t l l l t d h h d l f l t t h h f d t b t t t h d d fi h l t t t l d d t
Easy To Empty
he oo of he n t pe s u l on e un ck d t a l w ea y a c ss o he ne l n r f r em t ng
w w w . s m o k i n g b a n . c o m
Smoking Control Soluti ns
P i 1 0 6 3 e A hm un c w o k l nd
w l n ng k t £92 1 1 5 L t e A hmo nt /w o k l n r a d wa l m un ng k t
3 l t e Ashmount
1 5 i re Ashmount
Recycling Bins
www.bins4recycling.com
F f y earsof Progr ss
HOW TO ORDER To order direct from this Catalogue, please telephone 01253 600410 or fax 01253 792558. Alternatively, simply post your order to the address below.
Glasdon U.K. LimitedPreston New Road BLACKPOOLLancashire FY4 4ULTel: (01253) 600410Fax: (01253) 792558e-mail: [email protected]: www.glasdon.com
as on U sion
T l (01
412
4HOU
E
01253 600410
24HOUR ORDER
LINE
24HOURORDER
LIN
E
DER
OUR
R
From GLASDON eading verge post innovator
F fty Yea sof Progre s
®
The FLEXIBLE Hazard Marker Post for high-risk locations
H G Y C M E D Dh I T H h A H t & S f t W A d
h l t d t A R
d UK
d E d G
UR
HOW TO R R r e m e m y o r o u h o t e h ne
D n No h a
u ma n o t e n e o e £ u
V w e o o h o c a is n v
e m a rs e w v e
Arced Microp ismatic Impac alight™ refle tors inc ease light output and viewing angles for clear delinea ion by d y and night
NEW
Passively Safe to Performance Standard 100 NE4 BS EN 12767 2000
Reflexapol material construct on offers good rebound performance in the event of veh cular mpact
RXVERgEMAsTER T
NTEGRALLY MOULDED WHITE
BAND
62mph (100Km/h) drive hrough capabi i y - etu ned upright
4pAssEDe t d o BS N 1 76 2 00
Fi ty Yearsof P ogress
, Admiral, Advanced Neopolitan 150, Buffer, Centrum, Clifton, Durapol, Edgeliner, Edgemaster 20, Ellipse, Ensign, Enviropol, Glasdon Manchester, Guardsman, Impactalight, Infomaster, Impactapol Jubilee Linear, Mini Ensign, Neopolitan, Neopolitan Signhead, Phoenix, Plaza, Rebound Signmaster, Stanford, Victory and Zone are trademarks or registered trademarks of GLASDON GROUP or its subsidiaries in the UK and other countries.
don t o a L dx o er N
O 4 R
e + 12 3
n N
ACa
4 0
x 3 a : a e @g
w
CE
Glasdon Group Limited Is An Equal Opportunities Employer. © Glasdon UK Ltd. 08/2011 Glasdon reserve the right to alter price and specification without prior notice. PN/NB
vISIT THE GLASDON WEBSITE www.glasdon.com
...Buy With confidencefor information on other Glasdon products, please contact our Sales Office by Telephone: 01253 600410 or fax: 01253 792558.
n you ha
s s prion 80% re y led p per
When you have finished withthis leaflet please recycle it
0%
This letter printed 00% c ap