barge positioing equipment specs

8/8/2019 Barge Positioing Equipment Specs

1/8

integrated navigationsoftware for all yournavigation and positioning applications par excellence H h & h

g h 2d m

s h

H b

M k

o h - B , m m

o h

rov, rotv & auv k &

d

NaviPac is an integrated navigation softwarepackage, providing navigation and positioninginformation in support of any marine surveyproject, as well as offshore engineering andconstruction operations.

Navi Pac


2/8

survey planningThe NaviPac con guration module provides easy set-upof all survey parameters either in real-time or off-lineprior to the start of a survey project. The software featuresflexible selection of geodetic control parametersinc luding datums, projections, measurement units andgeoid models, allowing for operation world-wide. Vesselshapes are easily generated or imported and stored astemplates for later use.

A variety of methods are available for the creation of surveylines: e.g. click-and-drag by mouse/trackball, manualinput of survey line coordinates, offset/parallel surveylines, cross lines, circles, arcs, barge-lines, star patterns,etc. Survey lines can further be created pertaining toa defined survey area. A wizard allows creation oftemplates for input of other data formats.

All inputs are automatically stored in a project con gu-

ration le allowing the user to set up new surveys orquickly switch to an existing survey.

realtiMe operationNaviPac supports Windows XPP/Vista and is based on aclient/server solution enabling execution of all softwaresub-modules on any workstation on the network.

Field-tested device I/O drivers are available for allcommonly used positioning systems,: GPS/DGPS/RTKsystems, gyros and compasses, motion/attitude sensors,singlebeam echosounders, magnetometers, dynamicpositioning systems, IMCA, USBL/LBL/INS systems,ARPA and AIS, tide-gauges, autopilots, etc. Generic I/Odrivers allow de nition or customization of your owndevice I/O drivers. The I/O port settings are easily de nedand data is interfaced via RS232, LAN/WLAN (UDP/IP), orEIVA TimeBox time-synchronized interface unit.

Time stamping of sensor data is performed using theinternal computer clock or GPS PPS. Furthermore, theTimeBox time-synchronized interface unit provides LANinterface and distributed time tagging with accuracy betterthan 100 sec.

Full system exibility allows design and con gura-tion of survey parameters and preferred display layout.The Helmsmans display can be distributed without limitto slave monitors or workstations for individual windowslayout and interactive use by the operator.

The navigation monitor features graphical presentationof selected survey objects and cartographic features inreal-time for both absolute and relative positions. Vesselpositions, survey lines (in DXF, DWG and ASCII formats)and objects may be displayed superimposed on C-Mapor S57 based electronic chart displays. The Helmsmansmonitor displays off-track and along-track information,including planned and actual x location.

NaviPac features 3D displays allowing the operator tomonitor its own vessel, as well as other vessels and objects on top of unlimited sized 3D data models. Moreover,

depth coverage information as well as DTMs generatedon-the- y, is distributed to monitors for display in real-time.

NaviPac provides automated managing and storing ofsurvey data. During data logging records can be limitedin time or le size de ned by the user. Records are savedto a project directory allowing set up of new surveys orquick switching to an existing survey. Data is stored inASCII survey format, generic raw format and/or user-de ned format.

navipac liteNaviPac Lite is EIVAs entry-level software package foron-line navigation pertaining to basic surveys, e.g.using singlebeam echosounder. NaviPac Lite features alimited number of device I/O drivers and allows for laterupgrade to NaviPac Plus or the full version NaviPac.

navipac plusNaviPac Plus is intended for RTK operations and providesinterfaces for navigation sensors, GPS time synchronization,gyro compass, singlebeam echosounder, attitude/motionsensor, and data output. If used for multbeam echosound-er surveys the NaviScan software must be acquiredseparately for acquisition of data. NaviPac Plus allowsfor upgrade to the full version NaviPac.

Navi Pac

Teglbaekvej 8-10DK-8361 HasselagerDenmarkPhone +45 8628 2011Fax +45 8628 [email protected] www.eiva.dk


3/8

66-channel combined GPS/GNSS/L-band receiver provides sub-meter,precise point positioning accuracy worldwide between 72N and 72S.

Multi-constellation support and tracks GPS, GLONASS, Galileo, C-Nav,other SBAS (WAAS/EGNOS) signals, and accepts external RTCM input.

Small and lightweight for fast and hassle-free setup.

Easily congured utilizing C-Nav proprietary PC-based controller software application.

Easily monitored with intuitive front-panel LEDs or a C-NaviGator II Control/Display Unit.

C - N a v 3 0 5 0 F E AT U R E S :

C-Nav3050

0191/08


4/8

Specications subjectto change without notice.

2009 C & C Technologies, Inc.

L A FAY E T T E ( H E A D Q U A RT E R S )7 3 0 E . K A L I S T E S A L O O M R D .L A FAY E T T E , L O U I S I A N A 7 0 5 0 8 T E L : ( + 1 ) 3 3 7 . 2 1 0 . 0 0 0 0FA X : ( + 1 ) 3 3 7 . 2 6 1 . 0 1 9 2

H O U S T O N1 0 6 1 5 S H A D O W W O O D D RS U I T E 1 0 0H O U S T O N , T E X A S 7 7 0 4 3

T E L : ( + 1 ) 7 1 3 . 4 6 8 . 1 5 3 6FA X : ( + 1 ) 7 1 3 . 4 6 8 . 1 1 1 5

M E X I C OC A L L E 5 5 N 3 8 2C O L O B R E R A I N T E R 7 4 y 7 6C U I D A D D E L C A R M E N , C A M P E C H EC P 2 4 1 1 7 , M E X I C O T E L : ( + 5 2 ) 9 3 8 . 3 8 1 . 8 9 7 3FA X : ( + 5 2 ) 9 3 8 . 3 8 1 . 8 9 7 3

B R A S I LR U A M A U R I C I O S I LVA T E L E S , 9 5 ,

C E P 2 2 6 4 0 - 2 1 0 , B A R R A D A T I J U C AR I O D E J A N E I R O , B R A S I L T E L : ( + 5 5 ) 2 1 . 2 1 7 2 . 4 0 0 0FA X : ( + 5 5 ) 2 1 . 2 4 3 9 . 8 4 3 7

E U R O P E5 H I L L S I D E B U S I N E S S PA R K ( 1 S T F L O O R )K E M P S O N WAYB U RY S T E D M U N D SS U F F O L K , I P 3 2 7 E A , U K T E L : ( + 4 4 ) 1 2 8 4 . 7 0 3 . 8 0 0FA X : ( + 4 4 ) 1 2 8 4 . 7 0 1 . 0 0 4

S I N G A P O R E1 0 C H A N G I S O U T H L A N E

O S S I A I N T E R N AT I O N A L B U I D I N G # 0 3 - 0 1 BS I N G A P O R E 4 8 6 1 6 2 T E L : ( + 6 5 ) 6 2 9 5 . 9 7 3 8FA X : ( + 6 5 ) 6 2 9 6 . 0 0 9 8

S O U T H A F R I C A5 3 P E N I N S U L A R O A DZ E E K O E V L E I , C A P E T O W N 7 9 4 1S O U T H A F R I C A T E L : ( + 2 7 ) 2 1 . 7 0 5 . 2 7 4 1FA X : ( + 2 7 ) 2 1 . 7 0 5 . 2 7 4 1

A N G O L AR U A A N T O N I O M A R Q U E SM O N T E I R O N 3 6 / 3 8

L U A N D A - A N G O L A T E L : ( + 2 4 4 ) 2 2 2 . 3 3 0 2 0 2FA X : ( + 2 4 4 ) 2 2 2 . 3 3 5 4 6 4

090616

F E AT U R E SAll-in-view parallel tracking with 66 channelsSBAS (WAAS/EGNOS/MSAS/GAGAN) TrackingBuilt-in C-Nav L-band receiverL1, L2, L5, G1 & G2 full wavelength carrier phase trackingC/A, P1, P2, L2C, L5, G1 and G2 code trackingSoftware upgradeable for Galileo signal reception (E1, E5a)High sensitivity / Low signal level trackingFast signal acquisition / re-acquisitionSuperior interference suppression (both in and out of band)Patented multipath rejectionRTK Extend and C-Nav Over-The-Air activation capabilitiesCongurable as RTK base or roverProgrammable output ratesEvent Marker input / 1PPS output2GB Internal data storage

P H Y S I C A L / E N V I R O N M E N TA L

P E R F O R M A N C EGPS RECEIVER PERFORMANCE

Accuracy (RMS): Horizontal / VerticalRTK (


5/8

TSS and SG Brown, part of the VosperThornycroft group, have combined 85years of gyro experience to offer a newsurvey gyrocompass.

SG Brown have been designing andsupplying marine gyrocompasses to thethe worlds navies for more than half acentury. Still manufacturing and

supporting the most accurate systemsthe new Meridian has been designed tobe the smallest, lightest, most flexibleand accurate mechanical gyrocompassavailable to commercial users. TheMeridian is also the first to offer IMO,Wheelmark and HSC certification.

The new Meridian Surveyor boasts awide range of interfaces to enable useon any marine vessel. The unit utilises aDTG gyro element which providesexceptional performance with anaccuracy unmatched by even the latestfibre optic designs. Unlike conventionalspinning mass gyrocompasses, the

TSS TECHNOLOGY IN MOTION

MERIDIAN SURVEYOR GYROCOMPASS

The worlds smallest, digital marine gyrocompass

q IMO, Wheelmark& HSC certified

q Innovative chassis designincorporating state-of-the-art digital electronics forimproved reliability

q Maintenance free DTGelement

q Worlds smallest & lightest

marine gyroq Dynamic heading

accuracy of 0.2

q Static heading accuracyof 0.05

q


6/8

MERIDIAN SURVEYOR GYROCOMPASS

Technical Specifications

Due to continuous development of our products, specifications may vary from those listed above.

24 HR CUSTOMER SUPPORT +44 (0) 7899 665603

DP

MSYE

A Company

www.tss-realworld.com

Display type 360 Compass Card and VFD Display

Settle point 0.1 secant latitude

Static accuracy 0.05 RMS secant latitude

Dynamic accuracy 0.2 secant latitude

Follow up speed 200/sec.

Settling time


7/8

SATELLIN E -3AS(d)Wir eless World - Loca l Solut ion

The SATELLINE-3AS features a maximum data speed of 19.2 kbpsand a number of advanced data transfer functions. Each radio modemof the network can be used as a repeater. The Message Routingfunction facilitates easy setup of large networks with minimuminvestment.

Forward Error Correction (FEC) improves the functioning of the radiomodem under interference. The SATELLINE-3AS is compatible withthe RS-232, RS-422 and RS-485 interfaces. The 3ASd product versionis equipped with an LCD display of its own.

With SATEL radio modems,setting up a local data transfer net-work is quick and cost effective. Yourwireless network is independent andfree of operator services. The costof operation is either free of chargeor fixed, depending on the frequencyused. SATELLINE radio modems aretype-approved in over 50 countries.For the latest information, pleasevisit our website www.satel.com.

SATELLINE radio modems are alwayson line, and provide reliable, real-time data communications over dis-tances ranging from tens or hundredsof metres up to around 80 kilome-tres. Thanks to a store and forwardfunction, any radio modem in anetwork can be used as a masterstation, substation and / or repeater.

SATELLINE radio modemnetworks are flexible, easy to expandand can cover a wide variety ofsolutions from simple point-to-pointconnections to large networks com-prising hundreds of modems. Evenfor expanded networks, only oneoperating frequency is required.

All SATELLINE radio datamodems fulfil RoHS requirements(EU directives 2002/ 95/ EC and2002/96/ EU) as of 1 July 2006.

www.satel.com

SATELLINE UHF Radio Modems

VHF with N MS

UHF with NM S

UH F

Licence Free

IP67

OEM


8/8

SATELLINE UHF Radio Modems

Large radio modem networkMessage Routing features a versatile radio protocol thattakes care of the routing of messages across a radiomodem network. Communication is completely transpar-ent, which makes Message Routing directly compatible

for most user protocols. Even though the network cancover large areas with multiple hops and repeater stations,only one radio channel is required. Any radio modem inthe network can act as a repeater station, keepinginfrastructure expenses low. The SATELLINE-3AS is fullycompatible with the model SATELLINE-3AS Epic. Thanksto its high transmission power (10 W) and diversityreception, the latter can be used for exceptionally longconnection distances or under signal-fading conditions.

Correctness of messages securedIn the SATELLINE-3AS the error rate is minimised bymeans of advance checking and correction of the datapackets. In Forward Error Correction (FEC), the datapackets are split into several blocks. The radio modemadds correction information inside the blocks duringtransmission.

The Data Transfer mode of the SATELLINE-3AS includesa Command Program function in which the radio channeland addresses can be changed online from the serialport of the radio data modem. The changes are effectedby means of a specific programming package (SL com-mand), which is entered amidst ordinary data.

Expert's help always at handWith over 20 years of experience, SATEL Oy has growninto one of the leading radio modem manufacturers in theworld. As a result of our persistent and innovative work inboth product design and international marke-ting, we now

offer an extremely large selection of radio modems, andoperate through an extensive and skilled distributor networkall over the world.

SATEL Oy is an ISO 9001:2000 certified company. Thequality of our operations and products is kept as flawlessand at as high level as possible.

We have also accumulated a considerable amount ofknow-how in different radio modem applications. So,whatever your application is, do not hesitate to ask for ourexpert help whenever you need it. SATELLINE radio modemshave been used, for example, at airports, waterworks andelectricity plants for various monitoring and control appli-cations, as well as to set up location data-based fleet

management systems in cities.

SATEL Oy has prepared an extensive set of Appl icationNotes describing the different ways of utilising SATEL radiomodems in various applications. For further infor-mationabout our products and their applications, please visit ourhome page www.satel.com or contact your local dealer.

Manufa ctured:

SATEL Oy,Meriniitynkatu 17, P.O . Box 142,FI-24101 Salo, FINLAND

Tel. + 358 2 777 7800 [email protected] + 358 2 777 7810 www.satel.com

A versatile r ad io mod em witha number of user 's choices

Technical specifications SATELLINE-3AS and SATELLINE-3ASd

The equipment complies with the EN 300 113-1, -2, EN 300 220-1, -3,EN 301 489-1, -5, IEC 60950 and FCC CFR47 section 90 specifications.

TRANSCEIVER

Frequency Range 370 ...470 MHz

Channel Spacing 12.5 kHz / 20 kHz / 25 kHz

Number of Channels 160 / 100 / 80 (or 2 x 160 / 100 / 80) *Note1

Frequency Stability < 1.5 kHz

Type of Emission F1D

Communication Mode Half-Duplex

TRAN SMITTER

Carrier Power 10 mW... 1 W / 50 ohm

Carrier Power Stability + 2 dB / - 3 dB

Adjacent Channel Power according to EN 300 220 -1 / EN 300 113 -1Spurious Radiations according to EN 300 220 -1 / EN 300 113 -1

RECEIVER

Sensitivity < -115 dBm (BER< 10 E-3) *Note2

Co-channel rejection > - 12 dB

Adjacent channel selectivity > 60 dB @ 12.5 and 20 kHz @ > 70 dB 25 kHz

Intermodulation attenuation > 65 dB

Spurious radiations < 2 nW

DATA MO DEM

Interface RS-232, RS-485 or RS-422

Interface Connector D15, female

Data speed of RS interface 300 - 38400 bps

Data speed of radio interface 19200 bps @ 25 kHz, 9600 bps @ 12.5 / 20 kHz

Data format Asynchronous RS-232, RS-422, RS-485

GENERAL

Operating voltage + 9 ...+ 30 Vdc

Power consumption 1.5 VA typical (Receive)

5.5 VA typical (Transmit)

0.05 VA typical (when DTRis 0 )

Temperature range - Operating -25 C...+55 C (tests acc. to ETSI standards)

-40 C ...+ 75 C (absolute minimum / maximum)

- Storage -40 C + 85 C

Antenna Connector TNC, 50 ohm, female

Construction Aluminium enclosure

Size H x W x D 137 x 67 x 29 mm

Installation plate 130 x 63 x 1 mm

Weight 260 g

Distributor:

Values are subject to change without notice.*Note1: The Dual Band version operates on two separate 2 MHz frequency band.

*Note2: Depending on Receiver settings.

barge positioing equipment specs

Documents