bb-a282-03 manual tecnico

8/10/2019 BB-A282-03 Manual Tecnico

1/14

BB-ABB-ABB-ABB-A 282-03282-03282-03282-03 /en/ 2012-07 V1.0 / PDG 00-0000

3-Chip HD Camera Head

ENDOCAM Logic HD

8552592x

InstructionInstructionInstructionInstruction ManualManualManualManual

anged with the DEMO VERSION of CAD-KAS PDF-Editor (http://www.cadkas.com).



s text only appears in the demo version. This text can be removed with the full version.




2/14


3/14

ContentsContentsContentsContents

IIIIBB-A 282-03

1111 GeneralGeneralGeneralGeneral informationinformationinformationinformation 1111.... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

1.1 Symbol 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2 Intended use 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3 Indications and field of application 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4 Contraindications and side effects 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4.1 Contraindications 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.4.2 Side effects 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.5 Combinations 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2222 IllustrationIllustrationIllustrationIllustration 3333.... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

2.1 Camera head 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3333 PreparationPreparationPreparationPreparation 4444.... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

3.1 Connecting the objective lenses and endoscopes to the camera head 4. . . . . . . . . . . . .

4444 ChecksChecksChecksChecks 6666.... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

4.1 Visual check 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2 Function check 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5555 UseUseUseUse 6666.... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

5.1 Function assignment of the camera head buttons 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6666 ReprocessingReprocessingReprocessingReprocessing andandandand maintenancemaintenancemaintenancemaintenance 7777.... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

6.1 Overview: reprocessing of camera heads 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2 Reprocessing of camera heads 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2.1 Checks 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.2.2 Contaminated camera plug 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.3 Reprocessing procedures 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.4 Low-temperature sterilization 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.5 Maintenance intervals 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7777 TechnicalTechnicalTechnicalTechnical datadatadatadata 10101010.... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....

7.1 Operating, storage, transport and shipping 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.2 Spare parts and accessories 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7.3 Disposal of product, packaging material and accessories 11. . . . . . . . . . . . . . . . . . . . . . . .








4/14

1111 BB-A 282-03

1111 GeneralGeneralGeneralGeneral informationinformationinformationinformation

1.11.11.11.1 SymbolSymbolSymbolSymbol

Symbol Designation

Follow the instruction manual

Recycle the product separately. Do not discard together with other waste.

Identification in conformity with medical devices directive 93/42/EEConly validif theproduct and/orpackaging is marked with this symbol. Products of category IIa and above, as well as sterile ro!ducts or roducts with measuring function of category I, are additionally identified with the code no. ofthe notified body "#$24%.

1.21.21.21.2 IntendedIntendedIntendedIntended useuseuseuse

In conjunction with the ENDOCAM Logic HD Controller 552510x camerathe 3-Chip HD ENDOCAM Logic HD 552592x Camera Head is used fordisgnostic and therapeutic interventions.

This product is designed exclusively for use by specialized medical personnel and may only be applied by medically qualified and adequatelytrained doctors.

1.31.31.31.3 IndicationsIndicationsIndicationsIndications andandandand fieldfieldfieldfield ofofofof applicationapplicationapplicationapplication

This product is used for diagnostics and therapy in conjunction with endoscopic accessories.

On the basis of the patients general condition, the user in charge mustdecide whether the planned use is possible or not. For further notes andinstructions please refer to the latest medical literature.

CAUTION!CAUTION!CAUTION!CAUTION!

PossiblePossiblePossiblePossible failurefailurefailurefailure ofofofof thethethethe cameracameracameracamera head.head.head.head.

ForForForFor therapeutictherapeutictherapeutictherapeutic applicationsapplicationsapplicationsapplications aaaa secondsecondsecondsecond cameracameracameracamera headheadheadhead withwithwithwith thethethethe samesamesamesame spespespespe

cificationscificationscificationscifications shouldshouldshouldshould bebebebe available.available.available.available.








5/14

2222BB-A 282-03

1.41.41.41.4 ContraindicationsContraindicationsContraindicationsContraindications andandandand sidesidesideside effectseffectseffectseffects

1.4.11.4.11.4.11.4.1 ContraindicationsContraindicationsContraindicationsContraindications

Contraindications directly related to the product are presently unknown.

On the basis of the patient's general condition the doctor in charge mustdecide whether the planned use is possible or not.For further notes and instructions please refer to the latest medical literature.

1.4.21.4.21.4.21.4.2 SideSideSideSide effectseffectseffectseffectsSide effects directly related to the product are currently unknown.

1.51.51.51.5 CombinationsCombinationsCombinationsCombinations

CAUTION!CAUTION!CAUTION!CAUTION!

ForForForFor aaaa jointjointjointjoint useuseuseuse ofofofof thethethethe differentdifferentdifferentdifferent productsproductsproductsproducts itititit isisisis necessarynecessarynecessarynecessary thatthatthatthat thethethethe intendedintendedintendedintendeduseuseuseuse andandandand thethethethe relevantrelevantrelevantrelevant technicaltechnicaltechnicaltechnical datadatadatadata suchsuchsuchsuch asasasas workingworkingworkingworking length,length,length,length, diameterdiameterdiameterdiameter etc.etc.etc.etc.

areareareare thethethethe same.same.same.same.

FollowFollowFollowFollow thethethethe instructioninstructioninstructioninstruction manualsmanualsmanualsmanuals ofofofof thethethethe productsproductsproductsproducts usedusedusedused inininin conjunctionconjunctionconjunctionconjunction withwithwithwith

thisthisthisthis product.product.product.product.

When using the camera head, instruction manual GA-A282GA-A282GA-A282GA-A282 for the ENDOCAM Logic HD Controller 552510x camera must be followed.








6/14

3333 BB-A 282-03

2222 IllustrationIllustrationIllustrationIllustration

2.12.12.12.1 CameraCameraCameraCamera headheadheadhead

8888

&

1.61.61.61.6

1111

1.11.11.11.1

2222

1.31.31.31.31.41.41.41.41.51.51.51.5

1.21.21.21.2

1.71.71.71.7

LegendLegendLegendLegend

1111 Camera head

1.11.11.11.1 Head button 1111 (brightbrightbrightbright) for remote control (for button configuration see GA-A 282)

1.21.21.21.2 Head button 2222 (darkdarkdarkdark) for remote control (for button configuration see GA-A 282)1.31.31.31.3 C-mount thread for objective lens

1.41.41.41.4 Serial no.

1.51.51.51.5 Product no.

1.61.61.61.6 Camera plug

1.71.71.71.7 Plug protection cap

2222 Protection cap








7/14

4444BB-A 282-03

3333 PreparationPreparationPreparationPreparation

WARNING!WARNING!WARNING!WARNING!

TheTheTheThe appliedappliedappliedapplied partpartpartpart isisisis notnotnotnot protectedprotectedprotectedprotected againstagainstagainstagainst explosions.explosions.explosions.explosions.

ExplosionExplosionExplosionExplosion hazard.hazard.hazard.hazard.DoDoDoDo notnotnotnot operateoperateoperateoperate thethethethe appliedappliedappliedapplied partpartpartpart inininin ignitableignitableignitableignitable atmosphere.atmosphere.atmosphere.atmosphere.

IMPORTANT!IMPORTANT!IMPORTANT!IMPORTANT!Never direct the camera head at the sun or bright light sources in the vi

cinity. High-energy radiation in the visible and ultrviolet wavelength

ranges can damage the CCD chip surface. This may result in color dis

tortions and image noise.

When the camera head is not used, the protection cap must be installed.

IMPORTANT!IMPORTANT!IMPORTANT!IMPORTANT!Never pull at the camera cable.

Never squeeze, pinch and/or excessively bend the camera cable as thismay cause damage to the wiring resulting in image failure.

3.13.13.13.1 ConnectingConnectingConnectingConnecting thethethethe objectiveobjectiveobjectiveobjective lenseslenseslenseslenses andandandand endoscopesendoscopesendoscopesendoscopes totototo thethethethe cameracameracameracamera headheadheadhead

IMPORTANT!IMPORTANT!IMPORTANT!IMPORTANT!If the image is to dark, grainy or if there is image noise, this may be due

to an excessively large focal length of the objective lens or a zoom lens

that has been adjusted to an excessively large focal length.

Check the focal length of the objective lens or the adjustment of the zoom

objective lens.

NOTE!NOTE!NOTE!NOTE!Before assembling the endoscope and objective lens, check that the

glass surfaces of the endoscope, objective lens and camera head are dry

and dust-free. Any soiling can be removed with a cotton swab soaked

with allcohol (wooden or plastic swab carrier, not metal).

For a detailed description and overview of the objective lenses, see instruction manual GA-SGA-SGA-SGA-S 022022022022.








8/14

5555 BB-A 282-03

ConnectingConnectingConnectingConnecting thethethethe C-mountC-mountC-mountC-mount objectiveobjectiveobjectiveobjective lens:lens:lens:lens:

Remove the protection caps from the camera head and objective lens(Fig.1).

Screw the C-mount objective lens onto the camera head by turning

clockwise (Fig. 2).

ConnectingConnectingConnectingConnecting thethethethe endoscope:endoscope:endoscope:endoscope:

Place the endoscope onto the objective lens:

The snap-on locking mechanism is open and spring-loaded (Fig. 3) -Insert the endoscope (Fig. 4) - The snap-on locking mechanism locksautomatically holding the endoscope in place.

To remove the endoscope pull back the snap-on mechanism until it isunlocked (Fig. 3).

Abb.Abb.Abb.Abb. 1111











9/14

6666BB-A 282-03

4444 ChecksChecksChecksChecks

IMPORTANT!IMPORTANT!IMPORTANT!IMPORTANT!Run through the checks before and after each use.

Do not use the products if they are damaged or incomplete or have looseparts.

Return damaged products together with any loose parts for repair.

Do not attempt to do any repairs yourself.

4.14.14.14.1 VisualVisualVisualVisual checkcheckcheckcheck

Before and after each use, check the camera head and the accessories for damage, sharp edges, loose or missing parts and rough surfaces.

Check the connection cables and adapters for damage.

Any inscriptions, lettering or labeling necessary for the safe intendeduse must be legible.

Missing inscriptions, lettering or labeling leading to wrong handling orreprocessing must be reinstated.

Fogging or functional impairment may indicate the ingress of liquid.

4.24.24.24.2 FunctionFunctionFunctionFunction checkcheckcheckcheck

Carry out the function check of the camera head together with the ENDOCAM Logic HD Controller 552510x camera in accordance with

manual GA-A282GA-A282GA-A282GA-A282.

5555 UseUseUseUse

IMPORTANT!IMPORTANT!IMPORTANT!IMPORTANT!The camera heads cannotcannotcannotcannot be used for PPD and DAFE applications.

5.15.15.15.1 FunctionFunctionFunctionFunction assignmentassignmentassignmentassignment ofofofof thethethethe cameracameracameracamera headheadheadhead buttonsbuttonsbuttonsbuttons For the function configuration of the camera head buttons, see manual

GA-A282GA-A282GA-A282GA-A282 for the ENDOCAM Logic HD Controller 552510x camera.








10/14

7777 BB-A 282-03

6666 ReprocessingReprocessingReprocessingReprocessing andandandand maintenancemaintenancemaintenancemaintenance

IMPORTANT!IMPORTANT!IMPORTANT!IMPORTANT!Follow the latest notes and instructions in manual GA-J

GA-JGA-JGA-J 020,

020,020,020, Reproces

ReprocesReprocesReproces

singsingsingsing ofofofof RICHARDRICHARDRICHARDRICHARD WOLF WOLFWOLFWOLF heat-stableheat-stableheat-stableheat-stable instruments instrumentsinstrumentsinstruments.

Do not use disinfectants containing peracetic acid without corrosion

protection, phenols or chlorine components for the reprocessing of Ri

chard Wolf products.

Strictly adhere to the maximum immersion time in the disinfectants used,

as described by the manufacturers.

6.16.16.16.1 Overview:Overview:Overview:Overview: reprocessingreprocessingreprocessingreprocessing ofofofof cameracameracameracamera headsheadsheadsheads

ProductProductProductProduct no.no.no.no.

CameraCameraCameraCamera headheadheadhead

CleaningCleaningCleaningCleaning DisinfectionDisinfectionDisinfectionDisinfection SterilizationSterilizationSterilizationSterilization

Manual Machine Ultrasound Manual Machine High LevelSTERIS

SYSTEM 1 ,STERIS

SYSTEM 1E

Steam GasFA,

V-PRO 1

STERRADSTERRAD

50 / 100S / 200 / NX /100 NX,

PLASMASTER40 / 80 / 140

8552592x ++++ ++++ ---- ++++ ++++ ++++ ++++ ++++ ++++

++++ = recommended , ----= must notnotnotnot be used!

6.26.26.26.2 ReprocessingReprocessingReprocessingReprocessing ofofofof cameracameracameracamera headsheadsheadsheads

IMPORTANT!IMPORTANT!IMPORTANT!IMPORTANT!Immerse and sterilize the camera plug onlyonlyonlyonly withwithwithwith the plug protection cap in

place. If liquid enters the camera plug (e.g. because you forgot to put the

cap on) carefully rinse out the plug with clear water and dry carefully (with

compressed air if necessary).

6.2.16.2.16.2.16.2.1 ChecksChecksChecksChecks

Check all parts for damage and replace if necessary.

6.2.26.2.26.2.26.2.2 ContaminatedContaminatedContaminatedContaminated cameracameracameracamera plugplugplugplug

Clean, disinfect and then rinse the contaminated camera plug with

sterile water. Carefully dry the contacts.

Residual moisture in the contacts can impair signal transmission(e.g. interruptions, poor contacts).








11/14

8888BB-A 282-03

6.36.36.36.3 ReprocessingReprocessingReprocessingReprocessing proceduresproceduresproceduresprocedures

IMPORTANT!IMPORTANT!IMPORTANT!IMPORTANT!Due to the product design and the materials used it is not possible to define a specific limit of the number ofpossible reprocessing cycles. The service life of medical products is defined by their function and careful

handling.Before returning defective products for repair, these products must have gone through the entire reprocessing

cycle.

The user is obliged to make sure that the reprocessing process including the ressources, material and personnel is suited to reach the required reprocessing results.

The state of the art and national laws require that validated processes be followed.

ReprocessingReprocessingReprocessingReprocessing instructionsinstructionsinstructionsinstructions

ProductProductProductProduct CameraCameraCameraCamera headsheadsheadsheads ---- heat-resistantheat-resistantheat-resistantheat-resistant

PreparationPreparationPreparationPreparation atatatat thethethethepointpointpointpoint ofofofof useuseuseuse

Directly after use, remove any coarse soiling from the camera head. Do not use fixing agents or excessively hotwater (max. 40 C) as this will bake residues to the surfaces and may have a negative impact on the cleaningsuccess.

TransportTransportTransportTransport Store safely in a closed container, then transport the camera head to the reprocessing location, to preventdamage and contamination.

UltrasonicUltrasonicUltrasonicUltrasonic cleaningcleaningcleaningcleaning Ultrasonic cleaning is notnotnotnot permissible.

CleaningCleaningCleaningCleaning ManualManualManualManual cleaningcleaningcleaningcleaning MachineMachineMachineMachine cleaningcleaningcleaningcleaning

1.Immerse in a cleaning solution for at least 5 minutes.

2.Brush with a soft brush for at least 5 seconds toremove any residues.

3.Clean the buttons on the camera head with a softbrush. Make sure that no contaminant residues remain on and around the pushbuttons.

4.Rinse the camera head and camera cable with demineralized water.

5.Dry carefully with a cloth.

6.Clean the glass surfaces on the objective lens with a

cotton swab soaked with alcohol (wooden or plasticswab carrier, not metal).

1.Place the camera head in the sieve tray of theautomatic washer-disinfector.

2. Vario-TD program (without disinfection cycle):

Pre-clean with cold water for 4 minutes

Empty

Wash for 6 min at 55 C using an alkaline cleaner.

Empty

3 min of neutralization*) with warm tap water(max. 40 C)

Empty

2 min of intermediate rinsing with warm tap water(max. 40 C)

Empty

*) depending on the quality of the neutralization solution, add an acid based on citric acid.

DisinfectionDisinfectionDisinfectionDisinfection 1.Immerse the camera head in a certified disinfectantsolution, for exposure time refer to the manufacturer'sspecifications.

2.Rinse thoroughly with demineralized**** water.

3.Clean the glass surfaces with a cotton swab soakedwith alcohol.

Carry out thermal machine disinfection following thenational requirements regarding the A0 value (seeDIN EN ISO 15883).

HighHighHighHigh LevelLevelLevelLeveldisinfectiondisinfectiondisinfectiondisinfection

------- PeraceticPeraceticPeraceticPeracetic acid:acid:acid:acid:

STERIS SYSTEM 1 /STERIS SYSTEM 1E

DryingDryingDryingDrying Manual drying:

Dry the camera head with a sterile lint-free disposablecloth or swab.

Dry the camera head using the washer-disinfectordrying cycle (max. 60 C).

If required, dry the camera head additionally using alint-free disposable cloth or swab.

CareCareCareCare After chemothermal manual / machine disinfection, nononono additional care is required.

FunctionFunctionFunctionFunction test,test,test,test,maintenancemaintenancemaintenancemaintenance

Visual check for cleanliness. If necessary repeat the reprocessing process until the camera head is visuallyclean.

PackagingPackagingPackagingPackaging Package the camera head for sterilization as required by the standards for the sterilization procedure.

****= if there is nononono subsequent sterilization, thoroughly rinse with sterilesterilesterilesterile water.








12/14

9999 BB-A 282-03

ReprocessingReprocessingReprocessingReprocessing instructionsinstructionsinstructionsinstructions

ProductProductProductProduct CameraCameraCameraCamera headsheadsheadsheads ---- heat-resistantheat-resistantheat-resistantheat-resistant

SterilizationSterilizationSterilizationSterilization SteamSteamSteamSteam sterilization:sterilization:sterilization:sterilization:

Sterilization of products using the fractional pre-vacuum method (ISO13060/ISO17665) taking into account the

corresponding national requirements. Temperature exposure time: 4 min at 134 C +4 C (273 F +7 F), 4 min at 132 C +4 C (270 F +7 F)

Drying time: 10 - 20 min

Maximum sterilization temperature: 138 C

HydrogenHydrogenHydrogenHydrogen peroxideperoxideperoxideperoxide plasma:plasma:plasma:plasma:

STERRAD 50 / 100S / 200 / NX und 100 NX, PLASMASTER 40 / 80 / 140

Gas:Gas:Gas:Gas:

Formaldehyde gas (FA), hydrogen peroxide (V-PRO1)

StorageStorageStorageStorage Store the sterilized instruments in a dry, clean and dust-free environment at temperatures between 5 C and 40C.

ValidationValidationValidationValidation During validation, the following test instructions, materials and machines were used:

Machine cleaning agent:alkaline cleaning agent 0.5% neodisher FA (Dr. Weigert)

Manual cleaning agent:

enzymatic cleaning agent 0.5% neodisher MediClean (Dr. Weigert) Manual disinfectant:

Cidex (Advanced Sterilization Products)

Automatic washer-disinfector:Miele G 7735 CD

Washer-disinfector rack:Miele E 440/1

AdditionalAdditionalAdditionalAdditional notesnotesnotesnotesandandandand instructionsinstructionsinstructionsinstructions

The user is obliged to validate his process in accordance with DIN EN ISO 17664.

6.46.46.46.4 Low-temperatureLow-temperatureLow-temperatureLow-temperature sterilizationsterilizationsterilizationsterilization

IMPORTANT!IMPORTANT!IMPORTANT!IMPORTANT!The low-temperature procedures using hydrogen peroxide and peracetic

acid are approved for endoscopes and endoscopic accessories with re

gard to their material compatibility.

By no means must these low-temperature methods be used alternately.

Possible interactions between these sterilization procedures may damage

the instruments.

6.56.56.56.5 MaintenanceMaintenanceMaintenanceMaintenance intervalsintervalsintervalsintervals

IMPORTANT!IMPORTANT!IMPORTANT!IMPORTANT!To avoid any incidents or damage caused by aging and wear it is

necessary to service the product and the accessories at adequateintervals. Depending on the frequency of use, but at least once a year,

have an expert check the functional and operational safety of the

equipment.








13/14

10101010BB-A 282-03

7777 TechnicalTechnicalTechnicalTechnical datadatadatadata

CameraCameraCameraCamera headheadheadhead LengthLengthLengthLength

ofofofof cameracameracameracamera cablecablecablecableCompatibleCompatibleCompatibleCompatible

cameracameracameracamera controllercontrollercontrollercontroller ProductProductProductProduct no.no.no.no.

85525922

85525923

85525924

3.0 m

5.0 m

8.0 m

ENDOCAM Logic HDController

552510x

552520x

Degree of protection against the ingress of liquids IPX7

(protected against the effects of permanent submersion)

Weight with camera cable and camera plug

Cable length 3.0m: 0.600 kg (1.32 lbs)



Dimensions of camera head

Diameter, horiz. approx. 43 mm

Diameter, vertical approx. 53 mmLength approx. 105 mm

Cable outlet 30

Thread for objective lens C-mount

7.17.17.17.1 Operating,Operating,Operating,Operating, storage,storage,storage,storage, transporttransporttransporttransport andandandand shippingshippingshippingshipping

Operating conditions+10C to +30C,

30% to 75% rel. humidity,atmospheric pressure 700 hPa to 1060 hPa

Storage, transport and shipping conditions- 20C to +60C,

30% to 90% rel. humidity,atmospheric pressure 700 hPa to 1060 hPa

NOTE!NOTE!NOTE!NOTE!To prevent damage during transport or shipment of the products we recommend using the original packaging material.








14/14

11111111 BB-A 282-03

7.27.27.27.2 SpareSpareSpareSpare partspartspartsparts andandandand accessoriesaccessoriesaccessoriesaccessories

ProductProductProductProduct no.no.no.no. DesignationDesignationDesignationDesignation

15135463 Protection cap for camera head

85261144 RIWO objective lens, C-mount, f = 14 mm

85261244 RIWO objective lens, C-mount, f = 24 mm

85261.172 RIWO objective lens, C-mount, f = 17 mm



85261504 RIWO zoom objective lens, C-mount, f = 13 -24-29 mm

Further accessories on request

7.37.37.37.3 DisposalDisposalDisposalDisposal ofofofof product,product,product,product, packagingpackagingpackagingpackaging materialmaterialmaterialmaterial andandandand accessoriesaccessoriesaccessoriesaccessories

For the disposal follow the laws and regulations valid in your country.

For further information please contact the manufacturer.



t t l i th d i Thi t t b d ith th f ll i



bb-a282-03 manual tecnico

Documents