beanies by beans · 2021. 1. 15. · beanies by beans #1 by amy gunderson size teen/adult small...

We super duper hope you enjoy this project! This pattern and the associated photographs are for personal, non-commercial use and are not for resale. Please respect the people who worked to create this awesomepattern and do not make copies. Thanks a bunch!Got questions? Reach us at [email protected]

Copyrig

ht 2020

Jimm

y Beans Wool

1

Jimmy’s

Beanies by Beans

We did something really special for our 2020 Blanket Club! Each month, we had our own team of in-house expert knitters and crocheters (Team Jimmy Beans, aka The Beans!) design their own beanies, hats, toques, and other yarny head warmers. During the year, those patterns were exclusive to Blanket Club subscribers. Imagine that! Twenty-four brand new and exciting hat patterns, on top of the already awesome blanket pattern! It was the deal of the century! Well, by popular request, we have collected all of those patterns here, for your maker-tainment.

Please note, these hat patterns were originally designed to use Hedgehog Fibers Merino Aran (100% superwash merino wool, 100 grams/182 yards). That yarn base was exclusive to our Blanket Club, and we no longer stock it. Some good alternatives include:

• Malabrigo Rios (100% superwash merino wool, 100 grams/210 yards)• Madelinetosh Vintage (100% superwash merino wool, 100 grams/200 yards)• Lorna’s Laces Shepherd Worsted (100% superwash wool, 113 grams/225 yards)

Some of Team Beans are experts, for whom designing is old hat (ha!), while others are just beginning to spread their designer wings. We hope you enjoy these patterns, and have as much fun making them as we had designing them!


Copyrig

ht 2020

Jimm

y Beans Wool

2

Knit Abbreviationsc3/3L – slip 3 stitches onto cable needle and hold in front, k3, k3 from cable needle c3/3R – slip 3 stitches onto cable needle and hold in back, k3, k3 from cable needle CO - cast on dec’d – decreased Inc’d - increasedk – knit k1tbl – knit 1 stitch through the back loop K2tog - knit 2 stitches togetherK3tog - knit 3 stitches togetherM1 - make one stitchp – purl PM – place marker rem – remain rep – repeat RM – remove marker rnd(s) - rounds Sl – slip 1 stitch purlwisesl st – slipped stitch ssk – slip slip knit st(s) – stitch(es) yo – yarn over

Crochet AbbreviationsBeg – beginningBlo – back loop onlyBpdc – back post double crochetCh – chainch sp – chain spaceDc – double crochetDec’d – decreasedFpdc – front post double crochetFpdec – front post decreaseFpsc – front post single crochetHdc – half double crochetRem – remainRep – repeatRnd – roundRS – right sideSc – single crochetSc2tog – single crochet 2 sts togethersk – skipSl st – slip stitchSp – spaceSt(s) – stitch(es)Tr – triple crochetWS – wrong side

Table of Contents

Lotus Hat by Amy Gunderson..............................3

Lotus Hat by Adrienne Anila.................................5

Ripples Hat by Sarah Krutz...................................7

Ripples Hat by Amy Gunderson..........................9

Fish Food Hat by Alex Henley............................10

Fish Food Hat by Amy Gunderson....................12

Seagrass Hat by Rachel Roden..........................14

Scales & Rib Hat by Amy Gunderson................17

Asagi Hat by Sam Izquierdo..............................18

Utsuri Hat by Amy Gunderson..........................20

Streamline Hat by Diana Minard........................22

Water’s Edge by Amy Gunderson.....................23

Tropical Currents by Adrienne Anila.................24

Summer Breeze by Adrienne Anila....................26

Mer-Made Beanie by Wendy Wroff...................27

Creel Beanie by Erika Madden..........................28

Falling For Goldfish by Alex Henley...................29

Water’s Edge 2 by Amy Gunderson.................30

Rushing Waters by Alex Frankel........................32

Rippling Waters by Amy Gunderson................34

Undertow Beanie by Wren Cancemi................35

Slouchy Sloth by Adrienne Anila.......................37

By the Creek by Alex Frankel.............................38

Creekside by Erika Madden...............................40


Copyrig

ht 2020

Jimm

y Beans Wool

3

Lotus HatBeanies by Beans #1by Amy Gunderson

SizeTeen/Adult Small (Adult Medium, Adult Large)Finished Circumference: 16 (18.75, 21.25)”

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinNeedle: US Size 7 (4.5 mm) 16” circular & set ofdpns; US Size 5 (3.75 mm) 16” circularNotions: Tapestry needle, stitch markers, 2”pom-pom maker (optional, see notes)

Gauge18 sts x 24 rnds = 4” in stockinette stitch

Pattern NotesThis hat is knit in the round from the brim up.The largest size may not have enough yarnleftover for a 2” pom-pom. You could make asmaller pom-pom for this size, leave it off, or gostash diving!

Pattern:BrimWith smaller needle, cast on 72 (84, 96) sts. PM and join to work in the rnd, being careful not to twist sts.Rnds 1–10: [K1 tbl, p1] to end.

Hat BodySwitch to larger needle. Follow written instructions below, or charted instructions on next page.Rnd 1: * K1 tbl, p1, k1 tbl, k2tog, yo, p1, yo, ssk, [k1 tbl, p1] 2 times; rep from * to end. Pattern will be repeated 6 (7, 8) times across each rnd.Rnd 2: * K1 tbl, p1, k2tog, yo, p3, yo, ssk, p1, k1 tbl, p1; rep from * to end.Rnd 3: * K1 tbl, k2tog, yo, p5, yo, ssk, k1 tbl, p1; rep from * to end.Rnd 4: * K1 tbl, p9, k1 tbl, p1; rep from * to end.

Rnd 5: * K2tog, yo, p9, yo, ssk, p1; rep from * to end.Rnd 6: * K1, p9, k1, p1; rep from * to end.Rnd 7: * Ssk, p3, yo, p1, yo, p3, k2tog, p1; rep from * to end.Rnd 8: * K1, p9, k1, p1; rep from * to end.Rnds 9–12: Rep Rnds 7-8, 2 times.Rnd 13: * Yo, ssk, p7, k2tog, yo, k1; rep from * to end.Rnd 14: * K2, p7, k3; rep from * to end.Rnd 15: * K1, yo, ssk, p5, k2tog, yo, k2; rep from * to end.Rnd 16: * K3, p5, k4; rep from * to end.Rnd 17: * K2, yo, ssk, p3, k2tog, yo, k3; rep from * to end.Rnd 18: * K3, yo, ssk, p1, k2tog, yo, k4; rep from * to end.Rnd 19: * K4, yo, k3tog, yo, k5; rep from * to end.Work even in stockinette stitch (knit every rnd) until piece measures 6.25” from cast-on edge.

Shape CrownSet-up Rnd: * K12, pm; rep from * to end.Rnd 1: Knit to 2 sts before m, k2tog, sl m; rep from * to end– 6 (7, 8) sts dec’d, 60 (70, 80) sts remain.


Copyrig

ht 2020

Jimm

y Beans Wool

4

Rnd 2: Knit.Rnds 3–8: Rep Rnds 1-2, 3 more times – 42 (49, 56) sts remain.Rnds 9–12: Rep Rnd 1, 4 times – 18 (21, 24) sts remain.Rnd 13: * K3tog; rep from * to end – 6 (7, 8) sts remain.Break yarn leaving a 6” tail. Pull tail through live sts, pull taut, fasten off.

FinishingWeave in ends. Make a pom-pom and sew to top of hat.

b bbbbbb

bbb

19181716151413121110987654321

Lotus

b

knit

k1 tbl

purl

k2tog

ssk

yo

Key


Copyrig

ht 2020

Jimm

y Beans Wool

5

Lotus HatBeanies by Beans #2by Adrienne Anila

SizeAdult Small (Adult Medium/Large)Finished Circumference: 18.75” (21.25“)

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size H-8 (5 mm)Notions: Tapestry needle, stitch markers, 2”pom-pom maker (optional, see notes)

Gauge15 dc x 8 dc rows = 4“

Pattern NotesThis hat is worked from the top down in a spiral. The largest size may not have enough yarn leftover for a 2” pom-pom. You could make a smaller pom-pom for this size, leave it off, or go stash diving!

Special AbbreviationsFPHT: front post half-treble crochet (yarn over hook twice, insert hook around front of next post, yarn over hook, pull through two loops, yarn over, pull through remaining three loops)FPDC: DC through front post of next stBPDC: DC through back post of next st

Pattern:Use the magic ring and make 10 sc in ring. Pull tight and join with sl st.

Crown IncreasesRnd 1: Ch 2, dc in same st. 2 dc in each st around (20 dc).Do not join.Rnd 2: 2 dc in ch 2, 1 dc in next st, *2 dc in next st, 1 dc in next st* repeat between * * around (30 dc)

Rnd 3: *2 dc in first st, 1 dc in each of next two sts* repeat between * * around (40 dc)Rnd 4: *2 dc in first st, 1 dc in each of next 3 sts* repeat between * * around (50 dc)Rnd 5: *2 dc in 1st st, 1 dc in each of next 4 sts* repeat between * * around (60 dc)Rnd 6: *2 dc in 1st st, 1 dc in each of next 5 sts* repeat between * * around (70 dc)

Adult Medium/Large Size only:Rnd 7: *2 dc in 1st st, 1 dc in each of next 6 sts* repeat between * * around (80 sts)

Hat Body:All Sizes:Rnds 1–4: 1 dc in each st around.Rnd 5: *1 dc in each of next 4 sts, FPHT in next st, FPHT in next st, 1 dc in each of next 4 sts* repeat between * * around.Rnd 6: *1 dc in each of next 3 sts, FPHT, dc, dc, FPHT, dc, dc, dc* repeat between * * around.Rnd 7: *Dc, dc, FPHT, dc, dc, dc, dc, FPHT, dc, dc* repeat between * * around.Rnd 8: *Dc, FPHT, dc, dc, dc, ch 1, skip next st, dc, dc, FPHT, dc* repeat between * * around.Rnd 9: *Dc, dc, FPHT, dc, dc, dc, dc, FPHT, dc, dc* repeat between * * around.Rnd 10: *Dc, dc, dc, FPHT, dc, dc, FPHT, dc, dc,


Copyrig

ht 2020

Jimm

y Beans Wool

6

dc* repeat between * * around.Rnd 11: Repeat Rnd 5.Rnds 12 -13: Ribbing- *FPDC, BPDC* repeat between * * around.Join to top of 1st st with sl st. Fasten off.

FinishingWeave in ends. Make a pom-pom and sew to top of hat.


Copyrig

ht 2020

Jimm

y Beans Wool

7

Ripples HatBeanies by Beans #3by Sarah Krutz

SizeOne SizeFinished Circumference: Fits 21–22” head

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinNeedle: US Size 7 (4.5 mm) 16” circular & set ofdpnsNotions: Tapestry needle, stitch markers

Gauge21 sts x 24 rounds = 4” in pattern,unblocked/unstretched

Pattern NotesThis hat is knit in the round from the brimup. The pattern will look very small whenknitting, but stretches easily to fit teen andadult heads!

Pattern:BrimUsing circular needle, loosely cast on 75 sts. Join to knit inthe rnd, pm for beginning of rnd.Rnd 1: *K1, p1, k1* around.Repeat Rnd 1 until brim measures 1.5”, or desired length.Next rnd: *[K1, p1, k1] 5 times, pm* around.

Hat BodyFollow written instructions below, or the Ripples Chart.Rnd 1: *K2, p1, k3, p3, k3, p1, k2, sm*. Repeat * to * around, 5 times.Rnd 2: *K1, p1, k1, p1, k2, p3, k2, p1, k1, p1, k1, sm*. Repeat * to * around.Rnds 3 & 4: Repeat Rnds 1 & 2, 1 time.Rnd 5: *K1, p3, k3, p1, k3, p3, k1, sm* around.

Rnd 6: *K1, p3, k2, p1, k1, p1, k2, p3, k1, sm* around.Rnds 7 & 8: Repeat Rnds 5 & 6, 1 time.Repeat rnds 1-8, 4 times, until work measures 6.5” from cast on edge, or desired length.

Crown ShapingNote: Switch to dpns when there are too few sts to fit on the circular needle.Dec rnd: *SSK, work in established pattern to 2 sts before marker, k2tog, sm* around – 10 sts dec’d, 65 sts remain.Pattern rnd: Work even in established pattern, knitting decrease sts as you come to them.


Copyrig

ht 2020

Jimm

y Beans Wool

8

Repeat above two rows, 5 more times until 15 sts remain on needles.

Cut an 8” tail and, using tapestry needle, weave through remaining sts, cinch tight. Weave in ends. Finished hat measures 8” from cast on edge to crown, unblocked.


Copyrig

ht 2020

Jimm

y Beans Wool

9

Ripples HatBeanies by Beans #4by Amy Gunderson

SizeOne SizeFinished Circumference: 18” (stretches to 22”)

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size I-9 (5.5 mm) and US 7 (4.5 mm)Notions: Tapestry needle

Gauge14 sts x 13 rnds = 4” in Post Stitch Ribbing

Pattern NotesThis hat is worked from the top down. A 2x2Post Stitch Ribbing (hat body pattern) providessome stretch in this snug fitting beanie.

Pattern:Using larger hook, begin with adjustable ring.

Shape CrownRnd 1: Ch 1 (does not count as st here and throughout), 8 hdc in ring, join with sl st to beg hdc.Rnd 2: Ch 1, *2 fpdc in next hdc; rep from * around, join with sl st to beg fpdc – 16 sts.Rnd 3: Ch 1, * fpdc in next st, [fpdc, bpdc] in next st; rep from * around, join with sl st to beg fpdc – 24 sts.Rnd 4: Ch 1, * fpdc in next 2 sts, [2 bpdc] in next st; rep from * around, join with sl st to beg fpdc – 32 sts.Rnd 5: Ch 1, * fpdc in next 2 sts, bpdc in next st, [bpdc, fpdc] in next st; rep from * around, join with sl st to beg fpdc – 40 sts.Rnd 6: Ch 1, * fpdc in next 2 sts, bpdc in next 2 sts, [2 fpdc] in next 2 sts; rep from * around, join with sl st to beg fpdc – 48 sts.Rnd 7: Ch 1, * fpdc in next 2 sts, bpdc in next 2

sts, fpdc in next st, [fpdc, bpdc] in next st; rep from * around, join with sl st to beg fpdc – 56 sts.Rnd 8: Ch 1, * fpdc in next 2 sts, bpdc in next 2 sts, fpdc in next 2 sts, [2 bpdc] in next st; rep from * around, join with sl st to beg fpdc – 64 sts.

Hat BodyRnd 1: Ch 1, * fpdc in next 2 sts, bpdc in next 2 sts; rep from * around, join with sl st to beg fpdc.Rnds 2–12: Rep Rnd 1.Switch to smaller hook.Rnds 13–17: Rep Rnd 1.Fasten off.


Copyrig

ht 2020

Jimm

y Beans Wool

10

Fish Food HatBeanies by Beans #5by Alex Henley

SizeAdult Small (Large)Finished Circumference: 17.75” (21.25“)Height: 9.5”

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinNeedle: US Size 8 (5 mm) 16” circular & set ofdpnsNotions: Tapestry needle, stitch markers, 2” pom pom maker

Gauge18 sts x 24 rnds = 4” in Fish Food pattern

Stitch GuideWRAP: * Sl next 2 sts to right ndl wyif, wyib sl these sts back to left ndl; rep from * 2 more times, k2.

Fish Food (multiple of 16 sts)Rnd 1: * K2, WRAP, k6, WRAP, k4; rep from * to end.Rnds 2-6: Knit.Rnd 7: * K6, WRAP, K6, WRAP; rep from * to end.Rnds 8-12: Knit.Rep Rnds 1-12 for patt.

Pattern:BrimWith smaller 16” circular needle, cast on 80 (96) sts. PM and join to work in the rnd, being careful not to twist.Rnd 1: * K1, p1; rep from * to end. Rep Rnd 1 until Brim meas 1.5”.

Hat BodySwitch to larger needle.

Set-up Rnd: * K16, pm; rep from * to end.Rep Rnds 1-12 of Fish Food patt, 3 times.

Crown ShapingNote: Switch to dpns when there are too few sts to fit on the circular needle.Rnd 1: * K2, WRAP, k1, k2tog, ssk, k1, WRAP, k4; rep from * to end – 10 (12) sts dec’d, 70 (84) sts rem.Rnd 2: Knit.Rnd 3: * K4, k2tog, ssk, k6; rep from * to end – 10 (12) sts dec’d, 60 (72) sts rem.Rnd 4: Knit.Rnd 5: * K3, k2tog, ssk, k5; rep from * to end – 10 (12) sts dec’d, 50 (60) sts rem.Rnd 6: Knit.Rnd 7: * K2, k2tog, ssk, k2, WRAP; rep from * to end – 10 sts dec’d, 40 (48) sts rem.Rnd 8: Knit.Rnd 9: * K1, k2tog, ssk, k3; rep from * to end – 10 (12) sts dec’d, 30 (36) sts rem.Rnd 10: * K2tog, ssk, k2; rep from * to end – 10 (12) sts dec’d, 20 (24) sts rem.

Remove the beginning of round marker, sl the first st to the right ndl, replace marker for new beginning of round.


Copyrig

ht 2020

Jimm

y Beans Wool

11

Rnd 11: * Ssk, k2tog; rep from * to end – 10 (12) sts dec’d, 10 (12) sts rem. Break yarn leaving a 6” tail. Pass tail through rem live sts, pull taut, fasten off. Weave in ends and block. Make a 2” pom pom and sew to top of hat.


Copyrig

ht 2020

Jimm

y Beans Wool

12

Fish Food HatBeanies by Beans #6by Amy Gunderson

SizeChild (Adult Small, Adult Medium)Finished Circumference: 16.75” (17.5, 18.25“)

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size H-8 (5 mm) and US G-6 (4 mm) or size needed to obtain gaugeNotions: Tapestry needle, 2” pom-pom maker (optional, see notes)

Gauge20 sts x 11 rows = 4” in hdc blo ribbing with smaller hook13 sts x 11 rounds = 4” in Alternating Puff patt with larger hook

Pattern NotesThe brim is worked sideways and slip-stitched together to form a ring. The body of the hat isworked upward from the side of the brim. The largest size may not have enough yarn leftover for a 2” pom-pom. You could make a smaller pom-pom for this size, leave it off, or go stash diving!

Stitch GuidePuff: [Yo and insert hook in st, yo and pull through a loop] 3 times,yo and pull through all loops on hook.

Pattern:BrimWith smaller hook, ch 10.Row 1: Hdc in second ch from hook and each ch across, turn.Row 2: Ch 1, hdc in blo of each hdc across, turn.Rows 3–46 (48, 50): Rep Row 2.

Bring the beginning ch edge up to the last row worked. Sl st the edges together in blo, do not break yarn.

Hat BodyNote: The Hat Body is worked in joined rows.Set-up rnd (RS): Ch 1, work 60 (64, 68) sc evenly along side of Brim, join with sl st to beg sc, turn.

Begin PatternRnd 1 (WS): Ch 1, [hdc in next 3 sts, Puff in next st] to end, join with sl st to beg hdc, turn.Rnd 2 (RS): Ch 1, hdc in each st around, join with sl st to beg hdc, turn.Rnd 3: Ch 1, [hdc in next st, Puff in next st, hdc in next 2 sts] around, join with sl st to beg hdc, turn.Rnd 4: Ch 1, hdc in each st around, join with sl st to beg hdc, turn.Rep Rnds 1-4, 3 more times.

Shape CrownRnd 1 (WS): Ch 1, [hdc2tog, hdc in next hdc, Puff] around, join with sl st to beg hdc, turn. 15 (16, 17) sts dec’d, 45 (48, 51) sts rem.Rnd 2 (RS): Ch 1, [hdc2tog, hdc in next st] around, join with sl st to beg hdc, turn. 15 (16,


Copyrig

ht 2020

Jimm

y Beans Wool

13

17) sts dec’d, 30 (32, 34) sts rem.Rnd 3: Ch 1, [hdc2tog] around, join with sl st to beg hdc, turn. 15 (16, 17) sts dec’d, 15 (16, 17) sts rem.Rnd 4: Ch 1, [hdc4tog] 3 (4, 4) times, hdc3tog 1 (0, 0) time, hdc in last 0 (0, 1) st.Break yarn leaving 8” tail. Gather rem sts together, pull taut.

FinishingWeave in ends and block. Make a pom-pom if desired and sew to top of hat.


Copyrig

ht 2020

Jimm

y Beans Wool

14

Seagrass HatBeanies by Beans #7by Rachel Roden

SizeOne Size – Stretches to fit 20–24” head circumferenceFinished Circumference: 18’Height: 9”

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinNeedle: US Size 5 (3.75 mm) 16” circular, US Size 7 (4.5 mm) 16” circular & set of dpns, or size needed to obtain gaugeNotions: Tapestry needle, stitch markers, cable needle, 2” pom pom maker

Gauge20 sts x 28 rnds = 4” with smaller needle in k1 tbl, p1 ribbing (brim stitch) after blocking.

Pattern:CO 96 sts with smaller needle. Pm and join for working in the rnd.

Ribbed BrimRnd 1: *[K1tbl, p1]. Repeat from * around.

Repeat round 1 until the brim measures 1.5 inches long. Switch to larger needle.

Body + Crown DecreasesRnds 1–51: Follow rounds 1-51 of Chart 1, or the following written instructions.Rnd 1: *[Yo, ssk, (k1 tbl, p1) x 5, k1 tbl, k2tog, yo, p1]. Repeat from * around.Rnd 2: *[K2, (k1 tbl, p1) x 5, k1 tbl, k2, p1]. Repeat from * around.Rnd 3: *[K1, yo, ssk, (p1, k1 tbl) x 4, p1, k2tog, yo, k1, p1 ]. Repeat from * around.Rnd 4: *[K3, (p1, k1 tbl) x 4, p1, k3, p1]. Repeat from * around.

Rnd 5: *[K2, yo, ssk, (k1 tbl, p1) x 3, k1 tbl, k2tog, yo, k2, p1]. Repeat from * around.Rnd 6: *[K4, (k1 tbl, p1) x 3, k1 tbl, k4, p1]. Repeat from * around.Rnd 7: *[K3, yo, ssk, (p1, k1 tbl) x 2, p1, k2tog, yo, k3, p1]. Repeat from * around. Rnd 8: *[K5, (p1, k1 tbl) x 2, p1, k5, p1]. Repeat from * around.Rnd 9: *[K4, yo, ssk, k1 tbl, p1, k1 tbl, k2tog, yo, k4, p1]. Repeat from * around. Rnd 10: *[K4, p1, k1, k1 tbl, p1, k1 tbl, k1, p1, k4, p1]. Repeat from * around.Rnd 11: *[K4, p1, yo, ssk, p1, k2tog, yo, p1, k4, p1]. Repeat from * around. Rnd 12: *[K4, p2, k1, p1, k1, p2, k4, p1]. Repeat from * around. Rnd 13: *[2/2 RC, p2, yo, sk2p, yo, p2, 2/2 LC, p1]. Repeat from * around. Rnds 14 – 16: *[K4, p7, k4, p1]. Repeat from * around.Rnd 17: *[Yo, k3, ssk, p5, k2tog, k3, yo, p1]. Repeat from * around. Rnd 18: *[P1, k4, p5, k4, p2]. Repeat from * around. Rnd 19: *[P1, yo, k3, ssk, p3, k2tog, k3, yo, p2]. Repeat from * around. Rnd 20: *[P2, (k4, p3) x 2]. Repeat from * around.


Copyrig

ht 2020

Jimm

y Beans Wool

15

Rnd 21: *[P2, yo, k3, ssk, p1, k2tog, k3, yo, p3]. Repeat from * around.Rnds 22 – 24: *[P3, k4, p1, k4, p4]. Repeat from * around. Rnd 25: *[Yo, ssk, p1, 2/2 RC, p1, 2/2 LC, p1, k2tog, yo, p1]. Repeat from * around. Rnd 26: *[K2, (p1, k4) x 2, p1, k2, p1]. Repeat from * around. Rnd 27: *[K1 tbl, yo, ssk, k4, p1, k4, k2tog, yo, k1 tbl, p1]. Repeat from * around. Rnd 28: *[K1 tbl, (p1, k5) x 2, p1, k1 tbl, p1]. Repeat from * around. Rnd 29: *[K1 tbl, p1, yo, ssk, k3, p1, k3, k2tog, yo, p1, k1 tbl, p1]. Repeat from * around. Rnd 30: Repeat round 28. Rnd 31: *[K1 tbl, p1, k1 tbl, yo, ssk, k2, p1, k2, k2tog, yo, (k1 tbl, p1) x 2]. Repeat from * around. Rnd 32: *[(K1 tbl, p1) x 2, (k3, p1) x 2, (k1 tbl, p1) x 2]. Repeat from * around. Rnd 33: *[(K1 tbl, p1) x 2, yo, ssk, k1, p1, k1, k2tog, yo, (p1, k1 tbl) x 2, p1]. Repeat from * around. Rnd 34: Repeat round 32. Rnd 35: *[K1 tbl, p1) x 2, k1 tbl, yo, ssk, p1, k2tog, yo, (k1 tbl, p1) x 3]. Repeat from * around. Rnd 36: *[K1 tbl, p1) x 3, k1, p1, k1, (p1, k1 tbl) x 3, p1]. Repeat from * around. Rnd 37: *[K1 tbl, p1) x 3, yo, sk2p, yo, (p1, k1 tbl) x 3, p1]. Repeat from * around. Rnd 38: Repeat round 36. Rnds 39 – 40: *[K1 tbl, p1) x 8]. Repeat from * around. Rnd 41: *[Ssk, (k1 tbl, p1) x 5, k1 tbl, k2tog, p1]. Repeat from * around. (84 sts)Rnd 42: *[K1, (k1 tbl, p1) x 5, k1 tbl, k1, p1]. Repeat from * around. Rnd 43: *[Ssk, (p1, k1 tbl) x 4, p1, k2tog, p1]. Repeat from * around. (72 sts)Rnd 44: *[K1, (p1, k1 tbl) x 4, p1, k1, p1]. Repeat from * around.Rnd 45: *[Ssk, (k1 tbl, p1) x 3, k1 tbl, k2tog, p1]. Repeat from * around. (60 sts)Rnd 46: *[K1, (k1 tbl, p1) x 3, k1 tbl, k1, p1]. Repeat from * around.

Rnd 47: *[Ssk, (p1, k1 tbl) x 2, p1, k2tog, p1]. Repeat from * around. (48 sts)Rnd 48: *[K1, (p1, k1 tbl) x 2, p1, k1, p1]. Repeat from * around.Rnd 49: *[Ssk, k1 tbl, p1, k1 tbl, k2tog, p1]. Repeat from * around. (36 sts)Rnd 50: *[Ssk, p1, k2tog, p1]. Repeat from * around. (24 sts)Rnd 51: *[Sk2p, p1]. Repeat from * around. (12 sts)

Cut yarn and pull through remaining sts.

FinishingWeave in all ends and block gently. Make a pom pom with leftovers if desired!


Copyrig

ht 2020

Jimm

y Beans Wool

16


Copyrig

ht 2020

Jimm

y Beans Wool

17

Scales & Rib HatBeanies by Beans #8by Amy Gunderson

SizeAdult Small/Medium (Large)Finished Circumference: 18 (20)”Finished Height: 9”

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size I-9 (5.5 mm) or size needed to obtain gaugeNotions: Tapestry needle, 2” pom-pom maker (optional)

Gauge13 sts x 11 row = 4” in Cluster patt

Pattern NotesThis hat is worked sideways as a rectangle and is seamed at the end. 14 stitches at the end of each RS row and the beginning of each WS row form the brim ribbing, while the remaining stitches are the body of the hat.

Stitch GuideCluster (CL): [Insert hook into sp indicated and pull up a loop, yo and pull through 2 loops] 3 times, yo and pull through all 4 loops on hook.

Pattern:Ch 38.Row 1 (WS): Sc in 2nd ch from hook and next 13 chs, [sc in next ch, ch 1, skip next ch] to last ch, sc in last ch, turn.Row 2 (RS): Ch 3 (counts as dc), [CL in next sp, ch 1} to last sp, CL in last sp, dc in next st, hdc in blo of last 14 sc, turn.Row 3: Ch 1, sc in blo of next 14 hdc, sc in next st, [ch 1, sk CL, sc in sp] to last st, ch 1, sc in last st, turn.

Rep Rows 2 & 3 until piece measures 18 (20)”, ending with a Row 2. Fasten off leaving an 18” tail.

FinishingWith long tail, mattress stitch beg-ch edge with final edge of hat. Weave the same tail in and out of the top of the hat. Gather, pulling taut. Weave in ends and block. Make a pom-pom if desired and sew to top of hat.


Copyrig

ht 2020

Jimm

y Beans Wool

18

Asagi HatBeanies by Beans #9by Sam Izquierdo

SizeOne Size – 19” circumference x 8” tall

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinNeedle: US Size 7 (4.5 mm) 16” circular & set of dpns, or size needed to obtain gaugeNotions: Tapestry needle, stitch markers,

Gauge19 sts x 25 rnds = 4” in pattern

Stitch GuideLong Loop: Using needle tip go through purl stitch from front to back, wrap yarn around needle and pull through the stitch and up onto your needle.

Bobble: (K1, p1, k1, p1, k1) into next stitch, turn work; P5, turn; Sl2tog, K3tog, pass two slip stitches over.

M1: insert needle from front to back into the horizontal strand between the two stitches, knit through the back loop

Pattern:With circular needle, cast on 80 sts. Pm and join to knit in the rnd, being careful not to twist.Rnd 1: [K1, p1] to end. Repeat Rnd 1 for 2.5 inches.

Hat BodyInc rnd: *K8, m1; rep from * to end of rnd – 10 sts inc’d, 90 sts. Follow written instructions or Body chart:Rnds 1 & 2: * K13, p1, k4; rep from * to end of rnd. Pattern will be rep’d 5 times across each rnd.

Rnd 3: *K10, slip 1, Long Loop (see st guide) in first purl st from Rnd 1, move loop and slipped st to left needle, k2tog, K5, slip 1, Long Loop in previous purl stitch from Rnd 1, move loop and slipped st to left needle, k2tog, K1; rep from * to end of rnd.Rnd 4: Knit around.Rnd 5: *K13, bobble, k4; rep from * to end of rnd.Rnds 6 & 7: *K4, p1, k13; rep from * to end of rnd.Rnd 8: *K1, slip 1, Long Loop in next purl st from Rnd 6, move loop and slipped st to left needle, k2tog, k5, slip 1, Long Loop in previous purl st from Rnd 6, move loop and slipped st to left needle, k2tog, k10; rep from * to end of rnd.Rnd 9: Knit around.Rnd 10: *K4, bobble, k13; rep from * to end of rnd.Rep Rnds 1-10 a total of 3 times.

Crown DecreasesRnd 1: *K2, k2tog, ssk, k7, p1, K4; rep from * to end of rnd – 10 sts dec’d, 80 sts remain.Rnd 2: *K11, P1; rep from * to end of rnd.Rnd 3: *K1, k2tog, ssk, K3, slip 1, Long Loop in first purl stitch from Rnd 1, move loop and


Copyrig

ht 2020

Jimm

y Beans Wool

19

slipped st to left needle, k2tog, k5, slip 1, Long Loop in previous purl st from Rnd 1, move loop and slipped stitch to left needle, k2tog, k1; repeat from * to end of rnd.Rnd 4: Knit Rnd 5: *K2tog, ssk, K5, bobble, K4; repeat *to end of rnd.Rnd 6: *Ssk, K8, k2tog; repeat from * to end of rnd.Rnd 7: *Ssk, K6, k2tog; repeat from * to end of rnd.Rnd 8: *Ssk, K4, k2tog; repeat from * to end of rnd.Rnd 9: *Ssk, K2, k2tog; repeat from * to end of rnd.Rnd 10: *Ssk, K2tog; repeat from * to end of rnd.Rnd 11: K2tog around.

FinishingUsing a tapestry needle run yarn through remaining sts on needle. Pull and fasten off. Weave in ends and enjoy.


Copyrig

ht 2020

Jimm

y Beans Wool

20

Utsuri HatBeanies by Beans #10by Amy Gunderson

SizeAdult Small (Adult Medium)Finished Circumference: 17 (19)”Height: 8”

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size I-9 (5.5 mm) and US Size G-6 (4 mm) or size needed to obtain gaugeNotions: Tapestry needle, 2” pom-pom maker (optional, see notes)

Gauge20 sts x 11 rows = 4” in hdc blo ribbing with smaller hook14 sts x 16 rounds = 4” in hat body pattern with larger hook

Pattern NotesThe brim is worked sideways and slip-stitched together to form a ring. The body of the hat is worked upward from the side of the brim.

Stitch GuideFpdec: (This is a front post double crochet 2 together around sts from 2 rnds below the current round. The first leg will go in the stitch 2 sts before the next stitch in the current rnd, and the second leg will go in the stitch 2 sts after the next st in the current rnd.) *Yo and insert hook around post of st indicated, pull up a lp, yo and pull through 2 lps; rep from * in second st indicated; yo and pull through all lps on hook.

Bobble: [Yo and insert hook into st, pull up a lp, yo and pull through 2 lps] 3 times, you and pull through all lps on hook.

Pattern:BrimWith smaller hook, ch 10.Row 1: Hdc in second ch from hook and each ch across, turn.Row 2: Ch 1, hdc in blo of each hdc across, turn.Rows 3-45 (49): Rep Row 2.Bring the beginning ch edge up to the last row worked. Sl st the edges together in blo, do not break yarn.

Hat BodyNote: The Hat Body is worked in joined rows.Set-up rnd (WS): Ch 1, work 60 (66) sc evenly along side of Brim (about 4 sts for every 3 brim rows), join with sl st to beg sc, turn.Set-up Rnd 1 (RS): Ch 1, sc in each sc around, join with sl st to beg sc, turn.Set-up Rnd 2 (WS): Ch 1, sc in each sc around, join with sl st to beg sc, turn.

Begin PatternRnd 1 (WS): Ch 1, [sc in next 3 sc, fpdec, sk next sc, sc in next 2 sc] to end, join with sl st to beg sc, turn.


Copyrig

ht 2020

Jimm

y Beans Wool

21

Rnd 2 (RS): Ch 1, [sc in next 2 sc, Bobble in fpdec, sc in next 3 sc] to end, join with sl st to beg sc, turn.Rnd 3: Ch 1, [sc in next 3 sc, fpsc in Bobble, sc in next 2 sc] to end, join with sl st to beg sc, turn.Rnd 4: Ch 1, sc in each sc around, join with sl st to beg sc, turn.Rnd 5: Ch 1, [fpdec, sc in next 5 sc] to end, join with sl st to beg sc, turn.Rnd 6: Ch 1, [sc in next 5 sc, Bobble in next sc] to end, join with sl st to beg sc, turn.Rnd 7: Ch 1, [fpsc in Bobble, sc in next 5 sc] to end, join with sl st to beg sc, turn.Rnd 8: Ch 1, sc in each sc around, join with sl st to beg sc, turn.Rep Rnds 1-8, 1 more time, then rep Rnds 1-4, 1 more time.

Shape CrownRnd 1 (RS): Ch 1, [fpdec, sc in next 3 sts, sc2tog] to end, join with sl st to beg sc. 10 (11) sts decd, 50 (55) sts rem.Rnd 2 (WS): Ch 1, [sc in next 4 sc, Bobble in next sc] to end, join with sl st to beg sc, turn.Rnd 3: Ch 1, [fpsc in Bobble, sc in next 2 sc, sc2tog] to end, join with sl st to beg sc, turn. 10 (11) sts dec’d, 40 (44) sts rem.Rnd 4: Ch 1, sc in each sc around, join with sl st to beg sc, turn.Rnd 5: Ch 1, [sc in next 2 sc, sc2tog] to end, join with sl st to beg sc, turn. 10 (11) sts dec’d, 30 (33) sts rem.Rnd 6: Ch 1, [sc2tog, sc in next sc] to end, join with sl st to beg sc, turn. 10 (11) sts dec’d, 20 (22) sts rem.Rnd 7: Ch 1, [sc2tog] to end, join with sl st to beg sc. 10 (11) sts dec’d, 10 (11) sts rem. Break yarn leaving a 10” tail. Pass tail in and out of sts, pull taut.

FinishingWeave in ends and block.


Copyrig

ht 2020

Jimm

y Beans Wool

22

Streamline HatBeanies by Beans #11by Diana Minard

SizeOne Size – 18” circumference (stretches to 22”)

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinNeedle: US Size 7 (4.5 mm) 16” circular and US Size 8 (5 mm) 16” circular and set of dpns, or size needed to obtain gaugeNotions: Tapestry needle, stitch marker

Gauge20 sts x 28 rnds = 4” in patt with larger needle

Pattern NotesThis hat is worked in the round from the bottom up, and features slipped stitch & twisted columns. Slip all stitches purlwise with yarn held in back.

Stitch GuideRight Twist (RT): K2tog but do not sl sts from needle, knit the first st again, sl both sts from needle.

Pattern:With smaller needle, cast on 80 sts. PM and join to work in the rnd.

BrimRnds 1–2: [K2, p2] to end.Rnd 3: [RT, p2] to end.Rep Rnds 1-3, 2 more times.

Hat BodySwitch to larger needle.Inc rnd: [K2, p1, m1, p1] to end – 10 sts inc’d, 90 sts.

Establish PatternRnd 1: [K2, p1, k1, p1] to end.Rnd 2: [RT, p1, sl 1, p1] to end.Rnd 3: [K2, p1, k1, p1] to end.Rnd 4: [K2, p1, sl 1, p1] to end.Rnd 5: [RT, p1, k1, p1] to end.Rnd 6: [K2, p1, sl 1, p1] to end.Rep Rnds 1-6 until hat measures 7” or desired length, ending with any odd numbered rnd.

Shape CrownNote: Switch to dpns after Rnd 1.Rnd 1: [K2tog, p1, sl 1, p1] to end – 10 sts dec’d, 80 sts rem.Rnd 2: [K3tog, p1] to end – 40 sts dec’d, 40 sts rem.Rnd 3: [K2tog] to end – 20 sts dec’d, 20 sts rem.Rnd 4: [K2tog] to end – 10 sts dec’d, 10 sts rem.Break yarn leaving 6” tail. Pass tail through remaining live sts, pull taut.



Copyrig

ht 2020

Jimm

y Beans Wool

23

Water’s EdgeBeanies by Beans #12by Amy Gunderson

SizeAdult MediumFinished Circumference: 18” (stretches to 22”)

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size I-9 (5.5 mm) or size needed to obtain gaugeNotions: Tapestry needle

Gauge14 sts x 7 rnds = 4” in double crochet

Pattern NotesThis hat is worked in the round from the top down. Post stitches and crossed triples add texture and interest to this quick to make hat.

Pattern:Begin with adjustable ring.

Shape CrownRnd 1: Ch 3 (counts as dc here and throughout), 11 dc in ring, join with sl st to beg dc.Rnd 2: Ch 3, dc in same st, 2 dc in each st around, join with sl st to beg dc – 24 dc.Rnd 3: Ch 3, 2 dc in next st, [dc in next st, 2 dc in next st] around, join with sl st to beg dc – 36 dc.Rnd 4: Ch 3, dc in next st, 2 dc in next st, [dc in next 2 sts, 2 dc in next st] around, join with sl st to beg dc – 48 dc.Rnd 5: Ch 3, dc in next 2 sts, 2 dc in next st, [dc in next 3 sts, 2 dc in next st] around, join with sl st to beg dc – 60 dc.Rnd 6: Ch 3, dc in next 13 sts, 2 dc in next st, [dc in next 14 sts, 2 dc in next st] around, join with sl st to beg dc – 64 dc.

Hat BodyRnds 1-2: Ch 1, bpdc in each st around, join with sl st to beg dc.Rnd 3: Sl st in next st, ch 4 (counts as tr), tr in previous st, [sk next 2 sts, tr in next st, tr previous st] around, join with sl st to beg tr.Rnd 4: Ch 3, dc in each st around, join with sl st to beg dc.Rnds 5–8: Rep Rnds 1-4.Rnds 9–10: Rep Rnds 1-2.Rnd 11: Ch 3, dc in next 5 sts, dc2tog, [dc in next 6 sts, dc2tog] around, join with sl st to beg dc – 8 sts dec’d, 56 sts rem.Rnds 12–15: Ch 1, [fpdc in next st, bpdc in next st] around, join with sl st to beg dc. Fasten off.



Copyrig

ht 2020

Jimm

y Beans Wool

24

Tropical CurrentsBeanies by Beans #13by Adrienne Anila

SizeOne Size Height: 7” (brim to center of top)Circumference at brim: 22 inches (unstretched)

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinNeedle: US Size 8 (5 mm) 16” circular and set of dpns, or size needed to obtain gaugeNotions: Tapestry needle, stitch marker

Gauge4.5 sts per inch in stockinette st

Pattern NotesThis hat is worked in the round from the bottom up, and features slipped stitch & twisted columns. Slip all stitches purlwise with yarn held in back.

Stitch GuideRight Twist (RT): K2tog but do not sl sts from needle, knit the first st again, sl both sts from needle.

Pattern:CO 104 stsPm and join in rnd, being careful not to twist.

BrimRnd 1: * K2, p2; rep from * to end. Repeat Rnd 1 until Brim measures 1”, decreasing 1 st on the last rnd to 103 sts.

Hat Body:K 3 roundsBegin eyelet pattern:Rnd 1: *Yo, k2tog, k2, repeat from * around.

Repeat Rnd 1 for 4.5 inches (pattern will not always end at the marker)

Crown Decreasing:Rnd 1: *Work 2 repeats of eyelet pattern and continue until you are about to work the next yo, work that yo, then k3tog, pm, repeat from * around. You should have 15 sts between stitch markers, except for the beginning, which will have 14.Rnd 2: *Work to last st before marker in eyelet pattern, sl 1, remove marker, sl st back to left needle, then k3tog, pm, k4, repeat from * to last repeat, work to last st before round marker in eyelet pattern, sl 1, remove round marker, sl st back to left needle, then k3tog, pm.Rnd 3: K4, *work to last st before marker in eyelet pattern, sl 1, remove marker, sl st back to left needle, then k3tog, pm, k3, repeat from * to last repeat, work to last st before round marker in eyelet pattern, sl 1, remove round marker, sl st back to left needle, then k3tog, pm.Rnd 4: K3, *work to last st before marker in eyelet pattern, sl 1, remove marker, sl st back to left needle, then k3tog, pm, k2, repeat from * to last repeat, work to last st before round marker in eyelet pattern, sl 1, remove round marker, sl st back to left needle, then k3tog, pm.


Copyrig

ht 2020

Jimm

y Beans Wool

25

Rnd 5: K2, *work to last st before marker in eyelet pattern, sl 1, remove marker, sl st back to left needle, then k3tog, pm, k1, repeat from * to last repeat, work to last st before round marker in eyelet pattern, sl 1, remove round marker, sl st back to left needle, then k3tog, pm.Rnd 6: *Work to last st before marker in eyelet pattern, sl 1, remove marker, sl st back to left needle, then k3tog, pm, repeat from * to last repeat, work to last st before round marker in eyelet pattern, sl 1, remove round marker, sl st back to left needle, then k3tog, pm.Rnd 7: *Work to last st before marker in eyelet pattern, sl 1, remove marker, sl st back to left needle, then k3tog, pm, repeat from * to last repeat, work to last st before round marker in eyelet pattern, sl 1, remove round marker, sl st back to left needle, then k3tog, pm, remove st markers as they overlap other markers.

Continue as round 7 until 12 sts remain.

FinishingBreak yarn with 12” tail. Use tapestry needle to thread tail through remaining sts. Turn hat inside out. Tie off and weave in ends.


Copyrig

ht 2020

Jimm

y Beans Wool

26

Summer Breeze HatBeanies by Beans #14by Adrienne Anila

SizeAdult MediumFinished Circumference: 23”Height: 8”

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size H-8 (5 mm) or size needed to obtain gaugeNotions: Tapestry needle

Gauge3.5 sts per inch in treble crochet

Pattern:Rnd 1: Make magic ring, ch 3 (counts as dc), 9 dc in ring, join with sl st and pull tight - 10 dcRnd 2: Ch 1, *ch 5, sk 1, sc in next st, repeat from * around, join with sl st to beginning ch - 5, 5 ch-5 sps Rnd 3: Ch 3 (counts as dc), (hdc, sc, hdc, dc) in ch 5 sp, dc in sc of previous round, *(dc, hdc, sc, hdc, dc) in ch 5 sp, dc in sc of previous round, repeat from * to end, join with sl st - 10 dc, 10 hdc, 5 sc.Rnd 4: Ch 4 (counts as dc + ch 1), dc in same st, *ch 1, sk 1, [dc, ch 1, dc] in next st, repeat from * around, join with sl st to third ch of beg ch-4 - 24 dc, 24 ch-1 spsRnd 5: Sl to 1st ch sp, [ch 3 (counts as dc), 2 dc] in same ch sp, ch 1, * 3 dc in next ch sp, ch, repeat from * around, join with sl st to top of ch 3 - 36 dc, 12 ch-1 spsRnd 6: *Ch 5, sk 2 sts, sc in next ch sp, repeat from * around, join with sl st to beg ch - 12 ch-5 sps, 12 scRnd 7: Ch 3 (counts as dc), (hdc, sc, hdc, dc) in ch 5 sp, *ch 1, (dc, hdc, sc, hdc, dc) in ch 5 sp, repeat from * around, join with sl st to top of beg ch 3 - 24 hdc 12 sc. 24 dc

Rnd 8: [Ch 4 (counts as dc + ch 1), dc], *ch 2, sk 2, [dc, ch 1, dc] in next st, repeat from * around, join with sl st to third ch of beg ch-4 - 24 ch-2 sps, 48 dcRnd 9: [Ch 3 (counts as dc), 2 dc] in ch sp, ch 1, * sk next ch sp, 3 dc in next ch sp, ch 1, repeat from * around, join with sl st to beg ch-3. (96 sts each round from here on)Rnd 10: Sl st into next st, [ch 5 (counts as tr + ch 1), tr] in same st, ch 1, *[tr, ch 1, tr] in middle of next cluster of 3, ch 1, repeat from * around, join with sl st to fourth ch of beg ch-5.Rnd 11: [Ch 3 (counts as tr), 2 tr] in same ch sp, ch 1, * sk next ch sp, 3 tr in next ch sp, ch 1, repeat from * around, join with sl st to top of beg ch-3. Rnd 12: Sl st in next st, [ch 5 (counts as tr + ch 1), tr] in same st, ch 1, *[tr, ch 1, tr] in middle st of next cluster, ch 1, repeat from * around, join with sl st to fourth ch of beg ch-4.Rnds 13–16: Repeat rounds 11 and 12, 2 times.Fasten off and weave in ends.


Copyrig

ht 2020

Jimm

y Beans Wool

27

Mer-Made BeanieBeanies by Beans #15by Wendy Wroff

SizeFinished measurements: 16” circumference x 8.5” height

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinNeedle: US Size 6 (4 mm) 16” circular and US Size 8 (5 mm) 16” circular and set of dpns, or size needed to obtain gaugeNotions: Tapestry needle, stitch markers

Gauge20 sts = 4” in stockinette stitch

Pattern:With smaller needle, cast on 80 sts. PM and join to work in the rnd, being careful not to twist.Rnd 1: * K1 tbl, p1; rep from * to end. Repeat Rnd 1 until brim measures 2”.Switch to larger needle. Knit 3 rnds.

Establish PatternSet-up Rnd, *K16, PM* to end.

Rnd 1: * K5, p6, k5; repeat from * to end.Rnd 2: * K4, p8, k4; repeat from * to end.Rnd 3: * K3, p10, k3; repeat from * to end.Rnd 4: * K2, p4, k4, p4, k2; repeat from * to end.Rnd 5: * K2, p3, k6, p3, k2; repeat from* to end.Rnd 6: * K2, p2, k8, p2, k2; repeat from* to end.Rnd 7: * K2, p1, k10, p1, k2; repeat from* to end.Rnd 8: * P3, k10, p1, p3; repeat from* to end.Rnd 9: * P4, k8, p4; repeat from* to end.Rnd 10: * P5, k6, p5; repeat from* to end.Rnd 11: * K2, p4, k4, p4 , k2; repeat from* to end.Rnd 12: * K3, p3, k4, p3, k3; repeat from* to end.Rnd 13: * K4, p2, k4, p2, k4; repeat from* to end.Rnd 14: * K5, p1, k4, p1, k5; repeat from* to end.

Repeat Rnds 1-14, 1 more time.

Knit 4 rounds.

Shape Crown Note: Switch to DPN’s when not enough sts to fit on circular needle.Rnd 1: [K14, k2tog] around – 75 sts.Rnd 2: Knit.Rnd 3: [K13, k2tog] around – 70 sts.Rnd 4: Knit.Rnd 5: [K12, k2tog] around – 65 sts.Rnd 6: [K11, k2tog] around – 60 sts.Rnd 7: Knit.Rnd 8: [K10, k2tog] around – 55 sts.Rnd 9: [K9, k2tog] around – 50 sts.Rnd 10: Knit.Rnd 11: [K8, k2tog] around – 45 sts.Rnd 12: [K7, k2tog] around – 40 sts.Rnd 13: [K6, k2tog] around – 35 sts.Rnd 14: [K5, k2tog] around – 30 sts.Rnd 15: [K4, k2tog] around – 25 sts.Rnd 16: [K3, k2tog] around – 20 sts.Rnd 17: [K2tog] around – 10 sts.Rnd 18: [K2tog] around – 5 sts.

Pass tail through remaining live sts, pull taut, fasten off. Weave in ends and block.


Copyrig

ht 2020

Jimm

y Beans Wool

28

Creel BeanieBeanies by Beans #16by Erika Madden

SizeOne SizeFinished Measurements: 17.5” circumference x 9” height

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size 7 (4.5 mm) or size needed to obtain gaugeNotions: Tapestry needle

Gauge16.5 sts = 4”

Pattern:Begin with magic circle.Rnd 1: Ch 3 (counts as first dc here and throughout), 17 dc in magic circle. Join with sl st into first st. /18stRnd 2: Ch 3, dc in same st as first ch, *[dc, Fpdc] in next st, dc in next 2 sts; repeat from * around, join with sl st into first st. /24st.Rnd 3: Ch 3, dc in same st as first ch, dc in next st, 2 dc in next st, Fpdc in next st, *2 dc in next st, dc in next st, 2 dc in next st, Fpdc in next st; repeat from * around, join with sl stinto first st. /36st.Rnd 4: Ch 3, dc in same st as first ch. dc in next 3 sts, 2 dc in next st, Fpdc, *2 dc in next st, dc in next 3 sts, 2 dc in next st, Fpdc in next st; repeat from * around, join with sl st into firstst. /48st.Rnd 5: Ch 3, dc in same st as first ch, dc in next 5 sts, 2 dc in next st, Fpdc in next st, * 2 dc in next st, dc in next 5 sts, 2 dc in next st, Fpdc in next st, repeat from * around, join with sl stinto first st. /60st.Rnd 6: Ch 3, dc in same st as first ch, dc in next 7 sts, 2 dc in next st, Fpdc in next st, * 2 dc in next st, dc in next 7 sts, 2 dc in next st, Fpdc in

next st; repeat from * around, join with sl st into first st. /72st.Rnd 7: Ch 3, dc in next 8 sts, Fpdc in next st, * dc in next 9 sts, Fpdc in next st; repeat from * around, join with sl st into first st. /72st.Rnds 8-11: Repeat Rnd 7.Rnd 12: Ch 2 (does not count as a st), *4 Fpdc, 4 Bpdc; repeat from * around, join with sl st into first Fpdc.Rnds 13–17: Repeat Rnd 12Rnd 14: Ch 2, *4 Bpdc, 4 Fpdc; repeat from * around, join with sl st into first Bpdc. /72st.Rnds 15–17: Repeat Rnd 14.Rnds 18–21: Repeat Rnd 12.Rnds 22–25: Repeat Rnd 14.

FinishingFasten off. Weave in ends and block.


Copyrig

ht 2020

Jimm

y Beans Wool

29

Falling for GoldfishBeanies by Beans #17by Alex Henley

SizeAdult Small (Large)Finished MeasurementsCircumference: 17.75 (21.25)”Height: 10.5 (11)”


Gauge18 sts x 24 rnds = 4” in Texture patt

Stitch GuideK1, P1 Ribbing (even number of sts)Rnd 1: * K1, p1; rep from * to end.Rep Rnd 1 for patt.

Broken Rib (even number of sts)Rnd 1: Knit.Rnd 2: * K1, p1; rep from * to end.Rep Rnds 1-2 for patt.

Pattern:BrimWith smaller 16” circular needle, cast on 80 (96) sts. PM and join to work in the rnd, being careful not to twist. Work in K1, P1 Ribbing until Brim measures 3”.

Hat BodySwitch to larger needle. Starting with Rnd 1, work in Broken Rib patt until piece meas 7.5 (8)” from cast-on edge, ending with Rnd 1 of patt.

Crown ShapingNote: Switch to dpns when there are too few sts to fit on the circular needle.Set-up Rnd: * Work in patt over 16 sts, pm; rep from * to end.Rnd 1: * Ssk, knit to m; rep from * to end – 5 (6) sts dec’d, 75 (90) sts rem.Rnd 2: * Work in est’d Broken Rib to m; rep from * to end.Rnds 3–10: Rep Rnds 1-2, 4 more times – 20 (24) sts dec’d, 55 (66) sts rem.Rnd 11: * Ssk, knit to m; rep from * to end – 5 (6) sts dec’d, 50 (60) sts rem.Rnd 12: * Ssk, work in est’d Broken Rib to m; rep from * to end – 45 (54) sts rem.Rnds 13–16: Rep Rnds 11-12, 2 more times – 20 (24) sts dec’d, 25 (30) sts rem.Rnd 17: * Sssk, knit to m; rep from * to end – 10 (12) sts dec’d, 15 (18) sts rem.Rnd 18: * Sssk; rep from * to end - 10 (12) sts dec’d, 5 (6) sts rem.Break yarn leaving a 6” tail. Pass tail through rem live sts, pull taut, fasten off.



Copyrig

ht 2020

Jimm

y Beans Wool

30

Water’s Edge 2Beanies by Beans #18by Amy Gunderson

SizeOne SizeFinished Circumference: 18” (stretches to 22”)Height: 8”

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size H-8 (5 mm) or size needed to obtain gaugeNotions: Tapestry needle

Gauge14 sts x 15 rnds = 4” in single crochet

Pattern:Rnd 1: Fhdc 64, join with sl st to beg hdc. (Alternatively, ch 64, join with sl st to form ring being careful not to twist; ch 1, hdc in each st around, join with sl st to beg hdc.)Turn work.

Note: When working Rnd 13 fptr2tog, work the first leg underneath the post that’s in the way, and the second leg over the top of the post in the way. When working a Rnd 9, work the first leg over the top of the post in the way, and the second leg underneath the post that’s in the way.

Rnd 2 (WS): Ch 1, sc in each st around, join with sl st to beg sc, turn.Rnd 3 (RS): Ch 1, sc in each st around, join with sl st to beg sc, turn.Rnd 4: Rep Rnd 1.Rnd 5: Ch 1, sc in first 2 sc, * fptr2tog around sts from Rnd 1 [first leg is 2 sts backward, skip 3 sts, second leg in next st], sk sc behind fptr2tog, sc in next 3 sc; rep from *, ending last rep with sc in last st, join with sl st to beg sc, turn.

Begin RepeatRnds 6–8: Rep Rnds 2-7.Rnd 9: Ch 1, * fptr2tog around fptr from 4 rows down [first leg is 2 sts backward, skip 3 sts, second leg in next st], sk sc behind fptr2tog, sc in next 3 sc; rep from *, join with sl st to beg sc, turn.Rnds 10–12: Rep Rnds 2-4.Rnd 13: Ch 1, sc in first 2 sc, * fptr2tog around fptr from 4 rows down [first leg is 2 sts backward, skip 3 sts, second leg in next st], sk sc behind fptr2tog, sc in next 3 sc; rep from *, ending last rep with sc in last st, join with sl st to beg sc, turn.Rep Rnds 6-13, 3 more times, then rep Rnds 6-9, 1 more time.

Shape CrownRnd 1 (WS): Ch 1, * sc2tog, sc in next 2 sts; rep from * to end, turn – 16 sts dec’d, 48 sts rem.Rnd 2: Ch 1, sc in each st around, join with sl st to beg sc, turn.Rnd 3: Ch 1, * sc in next st, sc2tog; rep from * to end, turn – 16 sts dec’d, 32 sts rem.Rnd 4: Ch 1, : Ch 1, * fptr2tog around fptr from 4 rows down [first leg is 2 sts backward, skip 3 sts, second leg in next st], sk sc behind


Copyrig

ht 2020

Jimm

y Beans Wool

31

fptr2tog, sk 2 sc; rep from *, join with sl st to beg sc, turn – 16 sts dec’d,, 16 sts rem.Rnd 5: Ch 1, * sc2tog; rep from * to end – 8 sts rem. Fasten off leaving 8” tail.

FinishingWeave tail in and out of final rnd. Weave in ends and block.


Copyrig

ht 2020

Jimm

y Beans Wool

32

Rushing WatersBeanies by Beans #19by Alex Frankel

SizeAdult MediumFinished MeasurementsCircumference: 15”Height: 8.5”Note: This hat is extremely stretchy and will fit even large adult heads.


Gauge27 sts x 23 rnds = 4” in Hat Body pattern

Stitch Guidec2/2Rdec - Slip 2 stitches onto cable needle, hold in back, k2 from left needle, k2tog fromcable needlec2/2Ldec - Slip 2 stitches onto cable needle, hold in back, ssk from left needle, k2 fromcable needle

Pattern:BrimWith smaller needles, cast on 96 sts using tubular cast on for 2x2 ribbing or long tail caston. Place marker and join to work in the round, being careful not to twist sts.Work in [k2, p2] ribbing for 1.5”.

Increase RoundSwitch to larger needles.*[K2, p2] x 5, k2, p1, m1p, p1, k2, p2, k2, p1, m1p, p1; repeat from * to end. Pattern will berepeated 3 times across each round. (6 sts

increased. 102 sts.)

BodyRnd 1: *K2, p2, k2, c2/2R, p2, c2/2L, [k2, p2, k2, p3] x 2; repeat from * to end.Rnd 2 and all even-numbered rnds: Knit the knit sts and purl the purls.Rnd 3: *K2, p2, c2/2R, k2, p2, k2, c2/2L, p2, k2, p3, k2, p2, k2, p3; repeat from * to end.Rnd 5: *K2, c2/2R, k4, p2, k4, c2/2L, k2, p3, k2, p2, k2, p3; repeat from * to end.Rnd 7: *C2/2R, k6, p2, k6, c2/2L, p3, k2, p2, k2, p3; repeat from * to end.Rnd 9: *K6, c2/2R, p2, c2/2L, k6, p3, k2, p2, k2, p3; repeat from * to end.Rnd 11: *K4, c2/2R, k2, p2, k2, c2/2L, k4, p3, RT, p2, LT, p3; repeat from * to end.Rnd 13: *K2, c2/2R, k4, p2, k4, c2/2L, k2, p3, RT, p2, LT, p3; repeat from * to end.Rnd 15: *C2/2R, k6, p2, k6, c2/2L, p3, k2, p2, k2, p3; repeat from * to end.Work Rnds 9-16 two more times for a fitted beanie or 3 more times for a slouchier look.

Crown ShapingRnd 1: *K6, c2/2Rdec, p2tog, c2/2Ldec, k6, p3, k2, p2tog, k2, p3; repeat from * to end.(12 sts dec’d. 90 sts remain.)


Copyrig

ht 2020

Jimm

y Beans Wool

33

Rnds 2, 4, 6, 8, and 12: Knit the knit sts and purl the purls.Rnd 3: *K4, c2/2Rdec, k1, p1, k1, c2/2Ldec, k4, ssp, p1, RT, p1, LT, p1, p2tog; repeat from* to end. (12 sts dec’d; 78 sts.)Rnd 5: *K2, c2/2Rdec, k2, p1, k2, c2/2Ldec, k2, p2, k2tog, p1, ssk, p2; repeat from * toend. (12 sts dec’d; 66 sts.)Rnd 7: *C2/2Rdec, k3, p1, k3, c2/2Ldec, ssp, k1, p1, k1, p2tog; repeat from * to end. (12sts dec’d; 54 sts.)Rnd 9: Ssk, c2/2Rdec, p1, c2/2Ldec, k2tog x 2, p1, ssk; repeat from * to end. (18 sts dec’d;36 sts.)Rnd 10: Remove BOR marker, [K4, p1, k5, p1, k1] x 2, K4, p1, k5, p1, pm. (No decreases.36 sts.)Rnd 11: *C2/2Rdec, k1, p1, k1, C2/2Ldec, p1; repeat from * to end. (6 sts dec’d; 30 sts.)Rnd 13: *[Ssk, k2tog, p1] x 2; repeat from * to end. (12 sts dec’d; 18 sts.)Rnd 14: *K2tog, p1, ssk, p1; repeat from * to end. (6 sts dec’d; 12 sts.)Break yarn leaving a 6” tail. Pass tail through 12 remaining sts and fasten off.

FinishingWeave in ends and block gently.


Copyrig

ht 2020

Jimm

y Beans Wool

34

Rippling WatersBeanies by Beans #20by Amy Gunderson

SizeOne SizeFinished Circumference: 19” (stretches to 22”)

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size I-9 (5.5 mm) and US SIze 7 (4.5 mm), or size needed to obtain gaugeNotions: Tapestry needle, removeable stitch marker

Gauge14 sts x 7 rnds = 4” in double crochet

Pattern:Begin with adjustable ring and larger hook.

Shape CrownRnd 1: Ch 3 (counts as dc here and throughout), 14 dc in ring, join with sl st to beg dc – 15 dc.Rnd 2: Ch 1, fpdc in first st, dc in same st, {[fpdc, dc] in next st} around, do not join. Place removable marker on first st of rnd and work in a spiral – 15 fpdc, 15 dc.Rnd 3: {Fpdc in fpdc, [dc, ch 1 dc] in dc} to end – 15 fpdc, 30 dc, 15 ch-1 sps.Rnd 4: {Fpdc in fpdc, [dc, ch 1, dc] in ch-1 sp} to end – 15 fpdc, 30 dc, 15 ch-1 sps. Rnd 5: {Fpdc in fpdc, [2 dc, ch 1, 2 dc] in ch-1 sp} to end – 15 fpdc, 60 dc, 15 ch-1 sps.Rnds 6-15: Rep Rnd 5.Rnd 7: [Bptr in next st, bpdc in next 4 sts (skipping ch-1 sp)] to end – 15 bptr, 60 bpdc.Rnds 8–10: Fpdc in each st around, joining with sl st at the end of last rnd. Fasten off.



Copyrig

ht 2020

Jimm

y Beans Wool

35

Undertow BeanieBeanies by Beans #21by Wren Cancemi

SizeAdult Small (Large)Finished MeasurementsCircumference: 17.75 (21.25)”Height: 10.5 (11)”


Gauge18 sts x 24 rnds = 4” in stockinette stitch

Pattern:BrimWith smaller 16” circular needle, cast on 80 (96) sts. PM and join to work in the rnd, being careful not to twist.Rnds 1–9: * K1, p1; rep from * to end.Switch to larger needle.Rnd 10: * [K1, p1] 3 times, k5, [p1, k1] 2 times, p1, pm; rep from * to end.Rnd 11: * [K1, p1] 3 times, k5, [p1, k1] 2 times, p1; rep from * to end.Rnd 12: * [K1, p1] 2 times, k4, p1, k4, p1, k1, p1; rep from * to end.Rnd 13: * [K1, p1] 2 times, k3, p1, k1, p1, k3, p1, k1, p1; rep from * to end.Rnd 14: * K1, p1, k4, [p1, k1] 2 times, p1, k4, p1; rep from * to end.Rnd 15: * K1, p1, k3, [p1, k1] 3 times, p1, k3, p1; rep from * to end.Rnd 16: * K4, [p1, k1] 4 times, p1, k3; rep from * to end.Rnd 17: * K3, [p1, k1] 5 times, p1, k2; rep from * to end.Rnd 18: * K2, [p1, k1] 6 times, p1, k1; rep from *

to end.Rnd 19: * K1, p1; rep from * to end.Rnd 20: * [P1, k1] 3 times, p1, k3, [p1, k1] 3 times; rep from * to end.Rnd 21: * [K1, p1] 3 times, k5, [p1, k1] 2 times, p1; rep from * to end.Rnd 22: * [P1, k1] 2 times, p1, k7, [p1, k1] 2 times; rep from * to end.Rnd 23: * [K1, p1] 2 times, k9, p1, k1, p1; rep from * to end.Rnd 24: * P1, k1, p1, k11, p1, k1, p1; rep from * to end.Rnd 25: * K1, p1, k13, p1; rep from * to end.Rnd 26: * P1, k15; rep from * to end.

Hat BodyWork even in Stockinette stitch (knit every rnd) until piece meas 6.5 (7)” from cast-on edge.

Crown ShapingNote: Switch to dpns when there are too few sts to fit on the circular needle.Set-up Rnd: * K16, pm; rep from * to end.Rnd 1: * Ssk, knit to m; rep from * to end – 5 (6) sts dec’d, 75 (90) sts rem.Rnd 2: Knit.Rnds 3–10: Rep Rnds 1-2, 4 more times – 20 (24) sts dec’d, 55 (66) sts rem.


Copyrig

ht 2020

Jimm

y Beans Wool

36

Rnd 11: * Ssk, knit to m; rep from * to end – 5 (6) sts dec’d, 50 (60) sts rem.Rnds 12–16: Rep Rnd 11, 5 more times – 25 (30) sts rem.Rnd 17: * Sssk, knit to m; rep from * to end – 10 (12) sts dec’d, 15 (18) sts rem.Rnd 18: * Sssk; rep from * to end - 10 (12) sts dec’d, 5 (6) sts rem.Break yarn leaving a 6” tail. Pass tail through rem live sts, pull taut, fasten off.



Copyrig

ht 2020

Jimm

y Beans Wool

37

Slouchy SlothBeanies by Beans #22by Adrienne Anila

SizeOne size fits youth – adult

Finished Measurements9” height x 9.75” wide when laid flat

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size I-9 (5.5 mm) or size needed to obtain gaugeNotions: Tapestry needle, removeable stitch marker

Gauge15 dc = 4”

Pattern:Ch 4. Join with sl st to form a ring. Rnd 1: Ch 3 (counts as first dc), pm, Dc 11 times into the center of the ring. (12 dc.) Rnd 2: 2 dc in ch 3 from previous rd, 2 dc in each remaining st around (24 dc.) Rnd 3: * Dc in next st, 2 dc in next st, Repeat from * around (36 dc.) Rnd 4: * 1 dc in next 2 sts, 2 dc in next st* Repeat from *to * till the end of the rd. (48 dc.) Rnd 5: * 1 dc in next 3 sts, 2 dc in next st.* Repeat from * to * till the end of the rd (60 dc.) Rnd 6: * 1 dc in each of next 13 sts, 2 dc in next st, repeat from * to last 4 sts, 1 dc st to end of rd (64 dc.) Rnds 7– 17: 1 dc in each st around (64 dc.) Rnd 18: * Dc around front post of next st, dc around back post of next st, repeat from * around to 1 st before marker, sl st in last st.

FinishingTie off and weave in end.Make pom pom if desired and sew to top of hat.


Copyrig

ht 2020

Jimm

y Beans Wool

38

By the Creek BeanieBeanies by Beans #23by Alex Frankel

SizeOne SizeFinished MeasurementsCircumference: 16” unstretched, Height: 9.25”

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinNeedle: US Size 6 (4 mm) 16” circular and US Size 8 (5 mm) 16” circular and set of dpns, or size needed to obtain gaugeNotions: Tapestry needle, stitch markers, cable needle, 2” pom pom maker

Gauge23 sts x 27 rnds = 4” unstretched in pattern

Pattern:BrimWith smaller needles, cast on 96 stitches using long tail cast on. Place marker and join to work in the round, being careful not to twist stitches. Work in [k1, p1] ribbing for 1.75”.

Hat BodySwitch to larger needles.Rnds 1, 3, 5, 7: *K9, p1, k5, p1; rep from * to end. Pattern will be repeated 6 times across each round.Rnds 2, 6: *K9, p1, k5tbl, p1; rep from * to end.Rnd 4: *C3/3R, k3, p1, k5tbl, p1; rep from * to end.Rnd 8: *K3, c3/3L, p1, k5tbl, p1; rep from * to end.Work rnds 1-8 three more times, and rnds 1-7 once. Work the final body rnd as follows: [K3, c3/3L, p1, k5tbl, p1] x 5, k3, c3/3L, p1, k5tbl, sl1, RM, return sl st to left needle, PM.

Crown ShapingNote: Switch to dpns when there are too few sts to fit on the circular needle.Rnd 1: *K2tog, k7, ssk, k5; rep from * to end - 12 sts dec’d, 84 sts rem.Rnd 2: [K9, k5tbl] x 5, k9, k4tbl, sl1, RM, return sl st to left needle, PM.Rnd 3: *K2tog, k7, ssk, k3; rep from * to end- sts dec’d, 72 sts rem.Rnd 4: [C3/3R, k3, k3tbl] x 5, c3/3R, k3, k2tbl, sl1, RM, return sl st to left needle, PM.Rnd 5: *K2tog, k7, ssk, k1; rep from * to end - 12 sts dec’d, 60 sts rem.Rnd 6: [K9, k1 tbl] x 5, k9, sl1, RM, return sl st to left needle, PM.Rnd 7: *K2tog, k8; rep from * to end - 6 sts dec’d, 54 sts rem.Rnd 8: *K3, c3/3L; rep from * to end. Rnd 9: *Ssk, k2, k2tog, k1, k2tog; rep from * to end - 18 sts dec’d, 36 sts rem.Rnd 10: Knit.Rnd 11: *Ssk, k2, k2tog; rep from * to end - 12 sts dec’d, 24 sts rem.Rnd 12: Knit.Rnd 13: *Ssk, k2tog; rep from * to end - 12 sts dec’d, 12 sts rem.


Copyrig

ht 2020

Jimm

y Beans Wool

39

Break yarn leaving a 6” tail. Pass tail through 12 remaining stitches and fasten off.

FinishingWeave in ends and block. Make a pom pom with leftovers if desired and sew onto top of hat.


Copyrig

ht 2020

Jimm

y Beans Wool

40

CreeksideBeanies by Beans #24by Erika Madden

SizeOne SizeFinished Circumference: 18.25”

MaterialsHedgehog Fibres Merino Aran (100% superwash merino wool; 100g/182 yds) - 1 skeinHook: US Size 7 (4.5 mm) and US Size I-9 (5.5 mm) or size needed to obtain gaugeNotions: Tapestry needle, removeable stitch marker

Gauge16.5 sts = 4”

Pattern:Begin with magic circle and smaller hook.Rnd 1: Ch 3 (counts as dc here and throughout), 14 dc in magic circle, join with sl st to beg dc – 15 dc.Rnd 2: Ch 3, dc in same st, 2 dc in each dc around, join with sl st to beg dc – 30 dc.Rnd 3: Ch 3, dc in same st, 2 dc in next dc, [dc in next dc, 2 dc in next dc] around, join with sl st to beg dc – 45 dc.Rnd 4: Ch 3, dc in same st, dc in next dc, 2 dc in next dc, [dc in next 2 dc, 2 dc in next dc] around, join with sl st to beg dc – 60 sts.Rnd 5: Ch 3, dc in same st, dc in next 2 dc, 2 dc in next dc, [dc in next 3 dc, 2 dc in next dc] around, join with sl st to beg dc – 75 sts.Rnd 6: Ch 3, dc in each st around, join with sl st to beg dc.Rnd 7: Sl st in next st, ch 3, dc in previous st, [sk next 2 sts, dc in previous st] around, join with sl st to beg dc.Rnd 8: Ch 3, dc in each st around, join with sl st to beg dc.Rnds 9–16: Repeat Rnds 7-8, 4 more times.

Switch to larger hook.

Rnd 17: Ch 1, sc in same st, ch 4, sk next 4 dc, [sc in next dc, ch 4, sk next 4 dc] around, join with sl st to beg dc.Rnd 18: Ch 3, 5 dc in each ch-4 sp to last ch-4 sp, 4 dc in last sp, join with sl st to beg dc.Rnds 19–24: Repeat Rnds 13-14, 3 more times.

Fasten off.


beanies by beans · 2021. 1. 15. · beanies by beans #1 by amy gunderson size teen/adult small...

Documents