bicol international airport development project …€¦ · boq / grand summary page 1 of 70 . unit...
TRANSCRIPT
G R A N D S U M M A R Y
1.0 GENERAL REQUIREMENTS
PART A FACILITIES FOR THE ENGINEER 1 l.s.
PART B OTHER GENERAL REQUIREMENTS 1 l.s.
TOTAL COST - GENERAL REQUIREMENTS
2.0 CIVIL WORKS
2.1
LANDSIDE (Service Road, Parking, Entrance Road, Terminal Road,
Drainage System, Signages, Exterior Water System, Sewer System,
Exterior Chilled Water Piping, Exterior Electrical Works)
2.1.1 SERVICE ROAD 1 l.s.
2.1.2 PARKING/ ENTRANCE AND TERMINAL ROAD 1 l.s.
2.1.3 DRAINAGE SYSTEM 1 l.s.
2.1.4 EXTERIOR CHILLED WATER PIPING 1 l.s.
2.1.5 SIGNAGES (ROAD SIGNS) 1 l.s.
15 EXTERIOR UTILITY SYSTEM
15.1 NON POTABLE WATER TANK 1 l.s.
15.2 IRRIGATION SYSTEM 1 l.s.
15.3 EXTERIOR WATER SYTSTEM 1 l.s.
15.4 EXTERIOR SEWER SYSTEM 1 l.s.
15.5 MECHANICAL (EXTERNAL WORKS)
15.5.1 Airconditioning System 1 l.s.
15.5.3 Fire Protection System 1 l.s.
16 EXTERIOR ELECTRICAL WORKS (LANDSIDE)
16.1 Overhead Distribution Line 1 l.s.
16.2 Exterior Lighting 1 l.s.
16.3 Duct Bank 1 l.s.
16.4 Exterior (Landside) Auxiliary System 1 l.s.
TOTAL COST - LANDSIDE
2.2 AIRSIDE (Runway Completion, Perimeter Road, Perimeter Drainage)
2.2.1 RUNWAY COMPLETION 1 l.s.
2.2.2 PERIMETER ROAD 1 l.s.
2.2.3 PERIMETER DRAINAGE 1 l.s.
2.2.4 GROUTED RIPRAP 1 l.s.
2.2.5 DETENTION POND 1 l.s.
TOTAL COST - AIRSIDE
TOTAL COST - CIVIL WORKS
3.0 OTHER BUILDINGS
3.1 PASSENGER TERMINAL BUILDING 1 l.s.
UNIT COSTTOTAL
CONSTRUCTION COST
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
Package 2B - CONSTRUCTION OF PASSENGER TERMINAL BUILDING, RUNWAY COMPLETION AND
OTHER SITE DEVELOPMENT WORKS
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT
Republic of the PhilippinesDEPARTMENT OF TRANSPORTATION & COMMUNICATIONS
BOQ / Grand Summary Page 1 of 70
UNIT COSTTOTAL
CONSTRUCTION COST
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
Package 2B - CONSTRUCTION OF PASSENGER TERMINAL BUILDING, RUNWAY COMPLETION AND
OTHER SITE DEVELOPMENT WORKS
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT
Republic of the PhilippinesDEPARTMENT OF TRANSPORTATION & COMMUNICATIONS
3.2 ARRIVAL & DEPARTURE 1 l.s.
3.3 COVERED DRIVEWAY 1 l.s.
TOTAL COST - BUILDINGS
4.0 SPECIAL EQUIPMENT 1 l.s.
TOTAL COST - SPECIAL EQUIPMENT
TOTAL CONSTRUCTION COST - Package 2B
AMOUNT IN WORDS :______________________________________________________________________________________________________________
Submitted By:
(Name of Firm)
Signing Authority :
(Printed Name and Signature)
Designation:
Datte:
BOQ / Grand Summary Page 2 of 70
DEPARTMENT OF TRANSPORTATION AND COMMUNICATION
PART A FACILITIES FOR THE ENGINEER
A.1 Field Office for the Engineer
A.1(a) Rental and Maintenance of Office for the Engineer’s Representative 6 mo
A.1(b) Maintenance of Staff House for the Engineer 6 mo
A.1(c)Provide and Maintain Laboratory Building for the Engineer and Engineer’s
Representative1 ls
A.1(d) Maintain Field Office for the Engineer and Engineer’s Representative 1 ls
A.1(e)Furnish Equipment, Furnitures, Fixtures, Office Equipment and
Appliances for the Laboratory Building for the Engineer (Schedule B)1 ls
A.2(a)Provide, Operate and Maintain Communication Equipment for the
Engineer and Engineer’s Representative (Schedule C)30 mo
A.3(a)Provide Supplies and Consumable Stores for Office and Laboratory for
the Engineer and Engineer’s Representative (Schedules D)30 mo
A.4(a)Provide 4W D Pick-up Type, Double Crew Cab, Service Vehicle
Brandnew for the Engineer and Engineer’s Representative (Rental Basis)60 veh-mo
A.4(b)Operate and Maintain 4W D Pick-up Type, Double Crew Cab, Service
Vehicle for the Engineer and Engineer’s Representative60 veh-mo
A.4(c)Operate and Maintain Existing 4W D Pick-up Type, Double Crew Cab,
Service Vehicle for the Engineer and Engineer’s Representative24 veh-mo
A.5(a)Provide and Maintain Survey Instrument/Equipment for the Assistance to
the Engineer (Schedule F)1 ls
A.6(a) Progress Photographs 30 mo
Sub - Total -PART A FACILITIES FOR THE ENGINEER
PART B OTHER GENERAL REQUIREMENTS
B.1 Project Signboard 2 set
B.2 Construction Safety and Health 30 mo.
B.3 Environmental and Social Safeguard 30 mo.
Sub - Total -PART B OTHER GENERAL REQUIREMENTS
TOTAL COST - GENERAL REQUIREMENTS
UNIT COST
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
ITEM NO. DESCRIPTIONESTIMATED
QTYUNIT
TOTAL
CONSTRUCTION COST
BOQ / General Requirements Page 3 of 70
DEPARTMENT OF TRANSPORTATION AND COMMUNICATION
SUMMARY
2.0 CIVIL WORKS @ LANDSIDE
2.1
LANDSIDE (Service Road, Parking, Entrance Road, Terminal Road,
Drainage System, Signages, Exterior Water System, Sewer System,
Exterior Chilled Water Piping, Exterior Electrical Works)
2.1.1 SERVICE ROAD 1 l.s.
2.1.2 PARKING/ ENTRANCE AND TERMINAL ROAD 1 l.s.
2.1.3 DRAINAGE SYSTEM 1 l.s.
2.1.4 EXTERIOR CHILLED WATER PIPING 1 l.s.
2.1.5 SIGNAGES (ROAD SIGNS) 1 l.s.
15 EXTERIOR UTILITY SYSTEM
15.1 NON POTABLE WATER TANK 1 l.s.
15.2 IRRIGATION SYSTEM 1 l.s.
15.3 EXTERIOR WATER SYTSTEM 1 l.s.
15.3 EXTERIOR SEWER SYSTEM 1 l.s.
15.5 MECHANICAL (EXTERNAL WORKS)
15.5.1 Airconditioning System 1 l.s.
15.5.2 Fire Protection System 1 l.s.
16 EXTERIOR ELECTRICAL WORKS (LANDSIDE)
16.1 Overhead Distribution Line 1 l.s.
16.2 Exterior Lighting 1 l.s.
16.3 Duct Bank 1 l.s.
16.4 Exterior (Landside) Auxiliary System 1 l.s.
TOTAL COST - LANDSIDE
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
BOQ / Civil Works-Landside Page 4 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
2.0 CIVIL WORKS
2.1
LANDSIDE (Service Road, Parking, Entrance Road, Terminal Road,
Drainage System, Exterior Water System, Sewer System, Exterior
Chilled Water Piping
2.1.1 SERVICE ROAD
Part C Earthworks
105(1) Subgrade Preparation ( Common Materials) 7,172 sq.m.
Part D Subbase and Base Course
201 Aggregate Base Course 959 cu.m.
Part E Surface Courses
311(1)c PCC Pavement , 250mm thick (flexural strength 550 psi) 6,400 sq.m.
Part H Miscellaneous Structures
600(3)a Curb and Gutter ( Cast In place) 719 l.m.
TOTAL - SERVICE ROAD
2.1.2 PARKING / ENTRANCE AND TERMINAL ROAD
Part C Earthworks
105(1) Subgrade Preparation (Common Materials) 36,450 sq.m.
Part D Subbase and Base Course
200 Aggregate Subbase Course 4,795 cu.m.
201 Aggregate Base Course 1,071 cu.m.
Part E Surface Courses
311(1)a PCC Pavement , 150 mm thick (flexural strength 500 psi) 22,098 sq.m.
311(1)c PCC Pavement, 250 mm thick (flexural strength 500 psi) 7,136 sq.m.
311(1)c Side walk, 100 mm thick 2,459 sq.m.
Part H Miscellaneous Structures
600(3)a Curb and Gutter ( Cast In Place), L-Type 3,687 l.m.
600(3)b Recessed Curb ( Cast In Place) 1,352 l.m.
608(2) Placing Top Soil 249 cu.m.
612(1) Reflectorized Markings (Reflectorized Thermoplastic) 236 sq.m.
TOTAL - PARKING / ENTRANCE AND TERMINAL ROAD
2.1.3 DRAINAGE SYSTEM
PART G Drainage and Slope Protection Structures
103(6)Pipe Culverts including excavation, backfill & disposal with granular
bedding
500(1)a Reinforce Concrete Pipe Culvert 375 mm Dia., Class II 656 l.m.
500(1)b Reinforce Concrete Pipe Culvert 450 mm Dia., Class II 827 l.m.
500(1)c Reinforce Concrete Pipe Culvert 600 mm Dia., Class II 410 l.m.
500(1)d Reinforce Concrete Pipe Culvert 750 mm Dia., Class II 74 l.m.
500(1)e Reinforce Concrete Pipe Culvert 900 mm Dia., Class II 48 l.m.
500(1)f Reinforce Concrete Pipe Culvert 1050 mm Dia., Class II 48 l.m.
Reinforced Concrete Box Culvert
SPL 521(a) RCBC 1.80x1.80m Non-traffic type 23 l.m.
SPL 521(b) RCBC 2.0x2.0m Non-traffic type 224 l.m.
Reinforced Concrete Headwall & Wingwall
SPL 521(c) Inlet Headwall at Trapezoidal Canal A 1 set
SPL 521(d) Inlet Headwall at 1.80 x1.80m RC Box Culvert 1 set
BOQ / Civil Works-Landside Page 5 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
Curb Inlet Manholes & Cover
502(1)a-1Manholes, Curb Inlet Manholes for 375 mm dia. Pipes (Ave. Depth =
1.286m)5 ea.
502(1)a-2Manholes, Curb Inlet Manholes for 450 mm dia. Pipes (Ave. Depth =
1.394m)35 ea.
502(1)a-3Manholes, Curb Inlet Manholes for 600 mm dia. Pipes (Ave. Depth =
1.533m)18 ea.
502(1)a-4Manholes, Curb Inlet Manholes for 750 mm dia. Pipes (Ave. Depth =
1.749m)4 ea.
502(1)a-5Manholes, Curb Inlet Manholes for 900 mm dia. Pipes (Ave. Depth =
1.848m)3 ea.
502(1)a-6Manholes, Curb Inlet Manholes for 1050 mm dia. Pipes (Ave. Depth =
2.258m)5 ea.
502(2) Manholes, Curb Inlet for 375mm Dia.(Ave.Depth=1.236m) 42 ea.
502(4)a Concrete Covers, 600 mm dia(For Curb Inlet & Inlet Manholes) 112 ea.
103(1)h Dual Inlet Manholes & Cover
502(1)c-1Manholes, Dual Inlet Manholes for 375 mm Dia. Pipes (Ave. Depth =
1.236m)13 ea.
502(1)c-2Manholes, Dual Inlet Manholes for 450 mm Dia. Pipes (Ave. Depth =
1.344m)10 ea.
502(1)c-3Manholes, Dual Inlet Manholes for 600 mm Dia. Pipes (Ave. Depth =
1.483m)2 ea.
502(4)b Concrete covers,700mmx700mm (For Dual Inlet Manholes) 25 ea.
103(1)h Surface Inlet Manhole & Cover
502(1)bManholes, Surface Inlet Manhole for 375mm Dia. Pipes (Ave. Depth=
1.286m)3 ea.
502(1)bManholes, Surface Inlet Manhole for 450mm Dia. Pipes (Ave. Depth=
1.394m)3 ea.
502(1)bManholes, Surface Inlet Manhole for 600mm Dia. Pipes (Ave. Depth=
1.533m)2 ea.
502(6) Metal Frames and Covers(For Surface Inlet Manhole) 8 ea.
SPL 522CHB Lined Canal, Non – Traffic, W=1000mm, Depth=1000mm (includes
bedding concrete, formworks, rebars, etc to complete the work)
SPL 522(a) Canal A, B=3600mm, b-1200mm, d-1200mm 129 l.m.
SPL 522(b) Canal B, B=4500mm, b-1500mm, d-1500mm 106 l.m.
SPL 522(c) Canal C, B=2400mm, b-800mm, d-800mm 281 l.m.
TOTAL - DRAINAGE SYSTEM
2.1.4 EXTERIOR CHILLED WATER SYSTEM
SPL 512(a) Trench traffic type, W=1.20m, D=0.55m 43 l.m.
SPL 512(a) Trench traffic type, W=1.00m, D=0.825m 154 l.m.
SPL 512(a) Trench traffic type, W=0.90m, D=0.79m 38 l.m.
SPL 512(a) Trench Non-traffic type, W=1.20m, D=0.55m 35 l.m.
SPL 512(a) Trench Non-traffic type, W=1.00m, D=0.825m 62 l.m.
SPL 512(a) Trench Non-traffic type, W=0.90m, D=0.79m 51 l.m.
TOTAL - EXTERIOR CHILLED WATER SYSTEM
2.1.5 SIGNAGES (ROAD SIGNS)
Information Signs
605(3)a Priority Series, Stop Sign(600mmx600mm) 1 ea.
605(3)b Priority Series Give Way(866mmx750mm) 1 ea.
BOQ / Civil Works-Landside Page 6 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
605(3)c Direction Series, two way(750mmx450mm) 2 ea.
605(3)d Direction Series, One way(900mmx300mm) 2 ea.
605(3)e Direction Series, no entry(750mmx450mm) 1 ea.
605(3)f Parking Series, no parking (600mm dia.) 1 ea.
605(3)g Parking Series, no parking anytime(450mmx300mm) 2 ea.
605(3)h Parking Series, no Parking Waiting Anytime(450mmx300mm) 2 ea.
605(3)I Parking Series, Loading & Unloading Anytime(450mmx300mm) 2 ea.
605(3)j Parking Series, Reserve Parking(450mmx300mm) 4 ea.
605(3)k Prohibitive Series, No entry for jeepneys 1 ea.
605(3)l Prohibitive Series, No Overtaking 1 ea.
605(3)m Prohibitive Series, No Left Turn 1 ea.
605(3)n Prohibitive Series, No “U” Turn 1 ea.
605(3)o Direction Signs (2070mmx1100mm) 1 ea.
605(3)p Direction Sign(880mmx550mm) 1 ea.
605(3)q Direction Sign(650mmx550mm) 1 ea.
605(3)r Direction Sign(650mmx450mm) 1 ea.
605(3)q Warning Sign 4 ea.
605(3)r Regulatory Sign 4 ea.
TOTAL - SIGNAGES (ROAD SIGNS)
15 EXTERIOR UTILITY SYSTEM
15.1 NON POTABLE WATER TANK
DIV-02 SITE CONSTRUCTION
2.0 SITE WORKS
2.1.1 Building Layout 113 sq.m.
2.1.2 Structure Excavation 398 cu.m.
2.1.3 Backfilling and filling
2.1.3.2 Gravel base; 150 mm thk 18 cu.m.
2.1.4 Soil Disposal
2.1.4.1 Remove surplus excavated material from site 398 cu.m.
2.1.5 Subgrade Preparation 113 sq.m.
2.1.6Anti-termite treatment to surfaces of ground and sides and bottoms of
excavations287 sq.m.
Total "DIV-02" - SITE CONSTRUCTION
DIV-03 CONCRETE WORKS
3.1 Cast-In-Place Structural Concrete
3.1.1 Reinforced concrete; 280 kg/cm2 or 4000 psi or 27.60 Mpa
3.1.1.4 Beams, Coping beams 2 cu.m.
3.1.1.5 Suspended Slab, ramp and canopy 24 cu.m.
3.1.1.11 Water tank (RC wall, slab-on-grade) 116 cu.m.
3.2 Reinforcement in concrete
3.2.1Steel bar reinforcement including cutting and bending, links, stirrups,
binders, and tie wires, etc; grade 60
3.2.1.4 Beams, Coping beams 193 kg.
3.2.1.8 Water tank (RC wall, slab-on-grade) 16,210 kg.
3.2.1.9 Suspended Slab, ramp and canopy 83 kg.
3.2.2Steel bar reinforcement including cutting and bending, links, stirrups,
binders, and tie wires, etc; grade 40
3.2.2.4 Beams, Coping beams 91 kg.
3.2.2.5 Suspended Slab, ramps and canopy 1,583 kg.
3.3 Formwork
3.3.4 Beams, Coping beams 12 sq.m.
3.3.5 Suspended Slab, ramps and canopy 143 sq.m.
3.3.10 Water tank (RC wall, slab-on-grade) 510 sq.m.
3.4 Concrete Accessories
3.4.2 PVC Waterstop 141 l.m.
Total "DIV-03" - CONCRETE WORKS
DIV-05 METAL WORKS
5.10 Miscellaneous Metals
5.10.4 Stainless steel ladder rung (wall mounted)
BOQ / Civil Works-Landside Page 7 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
5.10.4.1 Ht. = 2.50m (W = 0.50m) 1 set
5.10.4.2 Ht. = 1.50m (W = 0.50m) 1 set
5.11 Manhole cover
5.11.1600mm dia. Steel Manhole cover including frame, handle, paint and all
incidentals to complete1 set
5.11.22000 x 1750mm (2 panels) checkered plate manhole cover including
frame, handle, paint and all incidental to complete1 set
5.11.3Steel Louver: W=0.50m, L=1.35m ; including frame, paint and all
incidentals to complete1 set
Total "DIV-05" - METAL WORKS
TOTAL COST -NON POTABLE WATER TANK
15.2 LANDSCAPE IRRIGATION SYSTEM
A. Pumps & Accessories
1.0 3/4 " Sprinkler Head, 18 ft (5.5 m.), full circle spray 401 set
3.0 Inline Strainer filter, 50 mmø PE 2 pc.
4.0 Pressure Regulators
4.1 32 mmø 2 pc.
4.2 25 mmø 7 pc.
4.3 20 mmø 1 pc.
5.0 1/4" (6mm) size Drip Tubing, PE 1,707 l.m.
6.0 Pipes & Fittings
6.1 63 mm PE Pipe 282 l.m.
6.2 50 mmø PE Pipe 1,152 l.m.
6.3 40 mmø PE Pipe 90 l.m.
6.4 32 mmø PE Pipe 1,207 l.m.
6.5 25 mmø PE Pipe 310 l.m.
6.7 20 mmø PE Pipe 30 l.m.
7.0 Coupling
7.1 63 mmø PE 225 pc.
7.2 50 mmø PE 920 pc.
7.3 40 mmø PE 60 pc.
7.4 32 mmø PE 1,102 pc.
7.5 25 mmø PE 134 pc.
7.6 20 mmø PE 10 pc.
8.0 Gate Valve
8.1 63 mmø 5 pc.
8.2 50 mmø 23 pc.
8.3 40 mmø 26 pc.
8.4 32 mmø 34 pc.
8.5 25 mmø 12 pc.
8.6 20 mmø 6 pc.
9.0 Tee
9.1 63 mmø 8 pc.
9.2 63 x 50 mmø 4 pc.
9.3 63 x 32 mmø 29 pc.
9.4 50 x 50 mmø 8 pc.
9.5 50 x 25 mmø 8 pc.
9.6 50 x 40 mmø 4 pc.
9.7 50 x 32 mmø 16 pc.
9.8 50 x 20 mmø 8 pc.
9.9 50 x 25 mmø 11 pc.
9.10 40 x 32 mmø 7 pc.
9.11 32 x 25 mmø 264 pc.
BOQ / Civil Works-Landside Page 8 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
9.12 32 mmø 80 pc.
9.13 25 mmø 92 pc.
10.0 End Cap
10.1 40 mmø 10 pc.
10.2 32 mmø 101 pc.
10.3 25 mmø 46 pc.
10.4 20 mmø 17 pc.
11.0 Elbow
11.1 63 mmø 8 pc.
11.3 50 x 40 mmø 3 pc.
11.3 50 x 32 mmø 1 pc.
11.4 40 mmø 6 pc.
11.5 40 x 25 mmø 4 pc.
11.6 32 mmø 22 pc.
11.7 25 mmø 70 pc.
11.8 20 mmø 2 pc.
12.0 Reducer
12.1 63 x 32 mmø 8 pc.
12.2 50 x 32 mmø 22 pc.
12.3 32 x 25 mmø 39 pc.
12.4 25 x 20 mmø 18 pc.
13.0 Tubing Adapter
13.1 32 mmø 30 pc.
13.2 25 mmø 40 pc.
13.3 20 mmø 60 pc.
14.0 Hose Bibb
14.1 25 mmø 35 pc.
15.0 Union
15.1 50 mmø male 8 pc.
15.2 50 mmø female 15 pc.
16.0 Saddle
16.1 63 mmø Branch Saddle 2 pc.
16.2 50 mmø Branch Saddle 2 pc.
16.3 40 mmø Branch Saddle 4 pc.
16.4 63 mmø Repair Saddle 2 pc.
16.5 50 mmø Repair Saddle 2 pc.
16.6 40 mmø Repair Saddle 4 pc.
16.7 50 mmø Tapping Saddle 8 pc.
16.8 32 mmø Tapping Saddle 14 pc.
16.9 25 mmø Tapping Saddle 12 pc.
17.0 Female Adapter
17.1 32 mmø 28 pc.
17.2 25 mmø 30 pc.
18.0 Male Adapter
18.1 32 mmø 28 pc.
18.2 25 mmø 30 pc.
TOTAL - LANDSCAPE IRRIGATION SYSTEM
15.4 EXTERIOR WATER SYTSTEM
DIV 02500 UTILITY SERVICE
2510 Water Distribution & Fire Protection System
2510.1Water Distribution Lines, PVC Pipes Class 150, includes Trenching,
Bedding, Backfill & etc.
02510.1(a) PVC Pipe, 50 mm ø 372 l.m.
BOQ / Civil Works-Landside Page 9 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
02510.1(b) PVC Pipe, 75 mm ø 120 l.m.
02510.1(c) PVC Pipe, 100 mm ø 348 l.m.
2510.2Transmission Lines, PVC Pipe Class 150, includes trenching, bedding,
backfill & etc.
02510.2(a) PVC Pipe 75 mm ø 102 l.m.
02510.2(b) PVC Pipe, 100 mm ø 900 l.m.
2510.5 Pipe Fittings, Includes thrust block
02510.5(a) 100 mm ø Tee 5 ea.
02510.5(b) 100 x 75 mm ø Tee 3 ea.
02510.5(c) 100 x 50 mm ø Tee 1 ea.
02510.5(d) 50 x 50 mm ø Tee 1 ea.
02510.5(e) 90 deg Bend, 100 mm ø 4 ea.
02510.5(f) 90 deg Bend, 75 mm ø 1 ea.
02510.5(g) 90 deg Bend, 50 mm ø 1 ea.
02510.5(h) 100 x 75 mm ø Reducer 1 ea.
02510.5(i) 100 x 50 mm ø Reducer 3 ea.
02510.5(j) 75 x 50 mm ø Reducer 2 ea.
02510.5(k) PVC End Cap, 50 mm ø 6 ea.
02510.5(l) PVC End Cap, 100 mm ø 1 ea.
02510.5(m) PVC Plug, 100 mm dia 1 ea.
2510.6 Gates Valves (includes Brass Union Adaptor)
02510.6(a) Gate Valve, 50 mm ø 3 ea.
02510.6(b) Gate Valve, 75 mm ø 4 ea.
02510.6(c) Gate Valve, 100mm ø 4 ea.
2510.7 Check Valve (include Brass Union Adaptor)
02510.7(a) Check Valve, 75mm ø 1 ea.
02510.7(b) Check Valve, 100 mm ø 1 ea.
2510.8 Valve Box
02510.8(a) PVC Valve Box for 75mm ø and below GV & CV 8 ea.
02510.8(b) Concrete Valve Box (for 100mm ø GV & 100mm ø CV) 5 ea.
2510.1 Blow Off Valve Assembly 2 set
2510.11 Air Release and Vacuum Valve Assembly 2 set
2510.12 Hosebibb, 20mm ø, includes Hose Bibb Box 6 set
2510.14 Service Connections
02510.14(a)Single Service Connection, 75mm dia x 23 lm service pipe
1 set
02510.14(b)Single Service Connection, 65mm dia x 6.0 lm service pipe
1 set
02510.14(c)Single Service Connection, 50mm dia x 10 lm service pipe (average)
5 set
02510.14(d)Single Service Connection, 40mm dia x 13.0 lm service pipe
2 set
02510.14(e)Single Service Connection, 32mm dia x 12.0 lm service pipe (average)
5 set
02510.14(f)Single Service Connection, 25mm dia x 3.0 lm service pipe
1 set
02510.14(g)Single Service Connection, 20mm dia x 25.0 lm service pipe (average)
2 set
TOTAL - EXTERIOR WATER SYTSTEM
15.5 EXTERIOR SEWER SYSTEM
DIV 02530 SANITARY SEWERAGE
2530.1 PVC Pipe, include trenching, bedding, backfill and etc.
02530.1(a) PVC Pipe, 200mm Dia. (Ave Depth = 3.0m) 704 l.m.
02530.1(b) PVC Pipe, 250mm Dia. (Ave Depth = 3.0m) 266 l.m.
2530.2 Sewer Manhole
02530.2(a)Sewer Manhole, Ave Depth= 3.0m, include excavation, backfill
concrete formworks, bedding, manhole cover & etc to complete the
works
37 ea.
2530.3Sewer Service Connection @ Manhole
BOQ / Civil Works-Landside Page 10 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
02530.3(a)Sewer Service Connection , 150mm dia (Ave. service pipe length =
10.0m) 4 ea.
02530.3(b)Sewer Service Connection , 100mm dia (Ave. service pipe length =
9.0m)12 ea.
Div 11300 FLUID WASTE TREATMENT AND DISPOSAL EQUIPMENTS
11390 Sewage Treatment Plant, 200 cu.m. per day 1 ls
TOTAL - EXTERIOR SEWER SYSTEM
15.2.1 Air Conditioning System
15.2.1.1 Chilled Water "External "Piping
15.2.1.1.1
Steel Pipe, ERW Sched 40 including support, trenching, backfilling, sand
bedding, in place, including all incidentals to complete as specified in
Mechanical Drawings and Technical Specifications.
1 200 mm ø 124 l.m.
2 100 mm ø 442 l.m.
3 65 mmø 142 l.m.
4 50 mm ø 72 l.m.
15.2.1.1.2
Black Steel Pipe Fittings. ASTM - A 53. Schedule 40. including paintings
and other consumable materials to complete as specified in Mechanical
Drawings and Technical Specifications.
1 90° Bend
2 200 mm ø 8 ea.
3 100 mm ø 10 ea.
4 65 mmø 4 ea.
5 50 mm ø 2 ea.
15.2.1.1.3 Tee
1 200 x 200 mm dia. 4 pc.
2 100 x 100 mm dia. 2 pc.
15.2.1.1.4 Tee Reducer
1 250 x 200 mm dia. 4 ea.
2 200 x 100 mm dia. 2 ea.
15.2.1.1.5 Coupling Reducer
1 250 x 200 mm dia, Reducer 2 pc.
2 250 x 100 mm dia, Reducer 2 pc.
3 250 x 65 mm dia, Reducer 2 pc.
5 100 x 50 mm dia, Reducer 2 pc.
15.2.1.2
Chilled Water Pipe Insulation, 50mm thk. Flexible closed cell
elastomeric thermal insulation as per ASTM C524 Type II Class 1 c/w
Vapor Barrier.
1 200 mm ø 124 l.m.
2 100 mm ø 442 l.m.
3 65 mm ø 142 l.m.
4 50 mm ø 72 l.m.
15.2.1.3 Aluminum Pipe Cladding
1 200 mm ø 124 l.m.
2 100 mm ø 442 l.m.
3 65 mm ø 142 l.m.
4 50 mm ø 72 l.m.
15.2.2 Valves & Piping Accessories (External)
15.2.2.1 Butterfly Valve
1 200 mmø 2 ea.
2 100 mmø 4 ea.
3 65 mmø 2 ea.
15.2.2.2 Ball valve
1 50 mm ø 2 ea.
BOQ / Civil Works-Landside Page 11 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
15.2.2.3 Flexible Pipe Coupling
1 200 mmø 2 ea.
2 100 mm ø 4 ea.
3 65 mmø 2 ea.
4 50 mm ø 2 ea.
15.2.2.4 Thrust block 24 set
15.2.2.5 Testing and Commisioning 1 lot
Sub - Total
15.2.2 Fire Protection External Piping Works
15.2.2.1
Steel Pipe, ERW Sched 40 including support, trenching, backfilling, sand
bedding, in place, including all incidentals to complete as specified in
Mechanical Drawings and Technical Specifications.
1 200 mm ø 758 l.m.
2 150 mm ø 273 l.m.
3 100 mm ø 380 l.m.
4 80 mm ø 42 l.m.
5 65 mm ø 6 l.m.
15.2.2.2 Black Steel fitting
15.2.2.2.1 90° Bend
1 200 mm ø 7 ea.
2 150 mm ø 6 ea.
3 100 mm ø 16 ea.
4 80 mm ø 1 ea.
5 65 mm ø 34 ea.
15.2.2.2.2 Tee
1 200 x 200 mm dia. 6 pc.
2 150 x 150 mm dia. 1 pc.
3 63 x 63 mm dia. 2 pc.
15.2.2.2.3 Tee Reducer
1 200 x 150 mm dia. 7 pc.
2 200 x 100 mm dia. 5 pc.
3 200 x 75 mm dia. 1 pc.
4 200 x 65 mm dia. 5 pc.
5 150 x 100 mm dia. 1 pc.
6 150 x 65 mm dia. 3 pc.
7 150 x 65 mm dia. 3 pc.
8 100 x 65 mm dia. 6 pc.
End cap
200 mm ø 4 pcs.
15.2.2.3 Valves and Accessories
15.2.2.3.1 Gate Valve
1 200 mm ф for future connection c/w end cap 4 set
15.2.2.3.2 Post Indicator Valve
1 200 mm ф 2 set
2 150 mm ф 2 set
3 100 mm ф 2 set
15.2.2.3.3 Thrust block 24 set
15.2.2.3.4 Painting 1 lot
15.2.2.4 Fire Hose Cabinet
1
Fire Hose Cabinet made from Ga.18 BI steel construction with glass
door, continuous steel hinge. Cabinet shall contain ø40cast brass
angle valve with 30 m of ø40 polyurethane singled line synthetic jacket
hose, brass nipple and coupling. Hose rack swivel type with pin and
water stop. NST thread for fire hose. Cabinet to contain one (1) 4.5 kg
abc dry chemical extinguisher.
14 set
BOQ / Civil Works-Landside Page 12 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
15.2.2.5 Fire Hydrants
1Fire hydrants ,complete with std. accessories as shown in plans,
details and specifications.13 set
15.2.2.6 Testing and Commisioning 1 lot
Sub - Total
TOTAL
DIV-16 EXTERIOR LANDSIDE ELECTRICAL SYSTEM
TS 16302 OVERHEAD DISTRIBUTION LINE
TS 16302/1 CONCRETE POLE
1 Pre-stressed concrete pole, 13.7m high class 5 55 ea.
TS 16302/2 Primary Pole Assembles
1 Type "PA" with "S1E1" secondary construction 1 set
2 Type "P3B1" with "S1E1" secondary construction 10 set
3 Type "P3A1" with "S1E1" secondary construction 40 set
4 Type "P3A1" with "2S1E1" secondary construction 3 set
5 Type "P3B1" with "2S1E1" secondary construction 1 set
TS 16302/3 Pole Guy Assembly
1 Guy Assembly Type "GB" 12 set
2 - Ditto - But Type "GC" 1 set
3 - Ditto - But Type "2XGB" 5 set
4 - Ditto - But Type "2XGA" 4 set
5 Stud Pole, 13.2m High 1 ea.
TS 16302/4 Primary/Secondary Cables Medium Voltages XLPE Cables
1 Primary Cables, 70mm² (2/0 AWG) ACSR (RAVEN) 1,920 l.m.
2100mm² (4/0 AWG) AACPE Insulated with 100mm² (4/0) ACSR
(NEUTRAL) Duplex Secondary Cable1,920 l.m.
3 1Cx95mm² XLPE Cable 150 l.m.
TS 16302/5 Load Break Switch
1 Load Break Switch, Horizontal Type, Three pole Gang Operated 600A, 3P 3 set
2 - Ditto -- but 500A, 3P 3 set
TS 16302/6 Pole Mounted Transformer
1 10kVA, 1Ø, 60Hz, 400V-Primary/230V-Secondary 5 ea.
TS 16302/7 Power Fuse
1 Disconnect Fuse Cut-Out Rated 500A with 400A Fuse Link 6 set
2 - Ditto -- But Rated 50A with 6A Fuse Link 6 set
TS 16302/8 Lightning Arrester
1 Lightning Arrester (Surge) Distribution Type, 10kV 12 set
TS 16302/9 High Voltage Termination
1 High Voltage Termination 13.2/7.62 1 lot
TS 16402 Testing and Commissioning 1 lot
Sub - Total
TS 16530 EXTERIOR LIGHTING
1Type "B" Street Lighting Fixture, 126w Led, On 7.62m Pre-Stressed
Concrete Pole, W/ 1.5m Long Mast Arm, Equipped W/ Photocell.55 set
2- Ditto - Except (Type "A"), 1-126w Led, Mounted On 7.62m Pre-Stressed
Concrete Pole W/ 1.5m Long Mast Arm Equipt W/ Photocell4 set
3- Ditto - Except (Type "B1"), 1-70w Led, Mounted On 7.62m Pre-Stressed
Concrete Pole W/ 1.5m Long Mast Arm Equipt W/ Photocell25 set
4
Type "B2" Prismalence Ca-Series 1-70w Led Perimeter Lighting W/
Electronic Gear & Hid Bulb And Aluminum Die-Cast W/ Powder Coat Or
7.62m High Steel Pole
13 set
5 - Ditto - But W/ Twin Arm 22 set
6 Type "W" Wall Mounted Lighting Fixtures W/ 2x39w Leds, 230v, 60hz. 17 set
7
Type "F1" Floodlight Lighting Fixture Complete With 1x150 Watts Ceramic
Metal Halide Lamp, 240v, 60hz, In Aluminum Die-Cast Housing, Bulb
Mogul Socket, Tempered Glass, With Aluminum Reflector Similar To
Amco Model No. C-85-Al
8 set
8Type "Q" Prismatic Bollard, Tc-0 G24d-3 26w Led Light, Diffuser Lens In
Prismatic And Made From Polycarbonate, Vandal Resistant18 set
BOQ / Civil Works-Landside Page 13 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
TS 16301/1 WIRES, POWER CABLES & TEL./DATA CABLES
1 3.5mm² THHN 11,476 l.m.
2 5.5mm² THHN 100 l.m.
3 8mm² THHN 704 l.m.
4 100mm² THHN 1,560 l.m.
5 200mm² THHN 800 l.m.
6 500mm² THHN 4,008 l.m.
7 3.5mm² TW 4,715 l.m.
8 5.5mm² TW 352 l.m.
9 30mm² TW 390 l.m.
10 50mm² TW 200 l.m.
11 125mm² TW 1,002 l.m.
12 1C x 50mm² XLPE CABLE 180 l.m.
13 50 PAIRS, 24 Awg TEL CABLE 105 l.m.
14 1-4 PAIRS CAT6a UTP DATA CABLE 105 l.m.
15 25 PAIRS. 24 Awg UTP MULTI-PAIR CABLE, CAT6a 1 lot
TS 16301/2 CONCRETE MANHOLES/HANDHOLES AND CONDRETE PEDESTAL
1 Concrete Pedestal For Power Supply 1 lot
2 - Ditto - But Tel./Catv Supply 1 lot
3Concrete Medium Voltage Manhole W/ Steel Frame And Cover Including
Ground Rod, Ground Wire & Exothermic Weld Connection7 lot
4 - Ditto - But Low Voltage Hole 16 lot
5 - Ditto - But Telephone System Manhole 19 lot
6Concrete Handhole W/ Concrete Cover Including Ground Rod &
Exothermic Weld Connection14 lot
7 - Ditto - But Tel. System Handhole 6 lot
8 High Mast Lighting Pedestal 6 set
9 Street Lighting Pedestal 70 set
10 Metering and Concrete Service Pedestal 1 set
11 Power Service Concrete Pedestal 1 set
12 Telecom Service Concrete Pedestal 1 set
13 Bollard Lighting Pedestal 187 set
14 Electrical Handhole, EHH 19 set
15 Concrete Handhole, CHH 14 set
16 Electrical Manhole, EMH 25 set
17 Telecom Manhole, CMH 11 set
TS 16402 Testing and Commissioning 1 lot
Sub - Total
TS 16302 DUCT BANK
A. 110mmø uPVC
A.1 Type "A", 15-110mmø uPVC + 9-110mmø uPVC 18 l.m.
A.2 Type "B", 19-110mmø uPVC + 4-110mmø uPVC 78 l.m.
A.3 Type "C", 17-110mmø uPVC + 4-110mmø uPVC 25 l.m.
A.4 Type "D", 12-110mmø uPVC + 4-110mmø uPVC 123 l.m.
A.5 Type "E", 10-110mmø uPVC + 4-110mmø uPVC 113 l.m.
A.6 Type "F", 7-110mmø uPVC + 4-110mmø uPVC 271 l.m.
A.7 Type "G", 6-110mmø uPVC + 4-110mmø uPVC 204 l.m.
A.8 Type "H", 5-110mmø uPVC + 4-110mmø uPVC 78 l.m.
A.9 Type "I", 4-110mmø uPVC + 3-110mmø uPVC 170 l.m.
A.10 Type "J", 4-110mmø uPVC + 3-110mmø uPVC 103 l.m.
A.11 Type "K", 2-50mmø uPVC 30 l.m.
A.12 Type "L", 3-50mmø uPVC 34 l.m.
A.13 Type "M", 4-50mmø uPVC 30 l.m.
A.14 Type "N", 5-50mmø uPVC 19 l.m.
A.15 Type "P", 4-110mmø uPVC + 4-110mmø uPVC 16 l.m.
A.16 Type "Q", 1-110mmø uPVC 138 l.m.
A.17 Type "R", 2-110mmø uPVC + 2-63mmø uPVC 18 l.m.
A.18 Type "S", 2-110mmø uPVC 10 l.m.
A.19 COMBINE1 4-110mmø uPVC + 4-110mmø uPVC 19 l.m.
A.20 1-50mm² Medium Drawn Bare Copper Wire 790 l.m.
A.21 Grounding Rod, 20mmø x 3048mm long, Copper-Bonded 66 ea.
A.22 Exothermic Connection, Cadweld, Type "GT", Cable to Ground Rod 66 set
Sub - Total
TOTAL EXTERIOR LANDSIDE ELECTRICAL SYSTEM
BOQ / Civil Works-Landside Page 14 of 70
TOTAL
CONSTRUCTION COSTITEM NO. DESCRIPTION
ESTIMATED
QTYUNIT UNIT COST
EXTERIOR (LANDSIDE) AUXILIARY SYSTEM
16.4 Fire Alarm System
16.4.3 Wires & Cables (including connectors etc.)
1 2.0mm² TW wire 915 l.m.
2 1.25mm² Shielded Twisted Pair, Fire Rated Cable 1,790 l.m.
16.4.5 Testing and Commissioning 1 lot
Sub - Total
16.5 Structured Cabling System
16.5.2 Wires & Cables (including connectors , etc.)
1 4-pairs x 0.64mm, UTP Cable, Cat6a 972 l.m.
2 25-Pairs, 24AWG UTP MULTI-PAIR CABLE, CAT6A 5,432 l.m.
3 50 Pairs, 24 AWG, UTP MUlLTI-PAIR CABLE, CAT6A (By Tel Provider) 2,045 l.m.
4 4 pairs x 0.64mm UTP cable, Cat6a (By Tel Provider) 2,045 l.m.
16.5.6 Testing and Commissioning 1 lot
Sub - Total
16.7 CATV System
16.7.2 Wires & Cables (including, connectors, etc)
2# 540 Series Jacketed Coaxial Cable with Integral Messenger wire(By
Service Provider)2,045 l.m.
16.7.4 Testing and Commissioning 1 lot
Sub- Total
16.8 CCTV System
16.8.2 Wires & Cables (including, connectors, etc)
1 CAT 6E UTP Cable 4 Pairs 1,698 l.m.
16.8.5 Testing and Commissioning 1 lot
Sub- Total
TOTAL EXTERIOR (LANDSIDE) AUXILIARY SYSTEM
TOTAL EXTERIOR ELECTRICAL WORKS
BOQ / Civil Works-Landside Page 15 of 70
DEPARTMENT OF TRANSPORTATION AND COMMUNICATION
S U M M A R Y
3.2 AIRSIDE (Runway Completion, Perimeter Road, Perimeter Drainage)
3.2.1 RUNWAY COMPLETION 1 l.s.
3.2.2 PERIMETER ROAD 1 l.s.
3.2.3 PERIMETER DRAINAGE 1 l.s.
3.2.4 GROUTED RIPRAP 1 l.s.
3.2.5 DETENTION POND 1 l.s.
TOTAL COST - AIRSIDE
TOTAL
CONSTRUCTION COST
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
BOQ / Civil Works-Airside Page 16 of 70
DEPARTMENT OF TRANSPORTATION AND COMMUNICATION
TOTAL
CONSTRUCTION COST
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
3.2 AIRSIDE (Runway Completion, Perimeter Road, Perimeter Drainage)
3.2.1 RUNWAY COMPLETION
Part C Earthworks
100.0 Cutting of Trees 250 pc.
101.0 Clearing,Grubbing and Disposal 69,000 sq.m.
102.0 Excavation of Unsuitable Materials & Disposal 34,500 cu.m.
( t = 50 cm )
104-A Embankment from Site Excavation 22,045 cu.m.
104-B Embankment from Source 199,850 cu.m.
105.0 Sub - Grade Preparation 40,320 sq.m.
Sub-Total
Part D/E Subbase and Base Course/ Surface Courses
200.0 Aggregate Sub-Base Course (t = 15 cm ) 1,620 cu.m.
202.0 Crushed Aggregate Base Course ( t = 10 cm ) 1,050 cu.m.
301.0 Bituminous Prime Coat 21 ton
310.0 Bituminous Concrete Surface Course ( t = 7.5 cm ) 1,890 ton
SPL - 1 Econocrete Sub - Base Course ( t = 25 cm. ) 30,420 sq.m.
311.0 Portland Cement Concrete Pavement ( t = 40 cm ) 29,530 sq.m.
311 - A Portland Cement Concrete Pavement ( Tapered ) 209 cu.m.
SPL - 2 Pavement Marking Thermoplastic ( white & yellow ) 2,465 sq.m.
312.0 Sodding 32,950 sq.m.
Sub-Total
Part H Miscellaneous Structures
AUXILLARY WORKS
SPL - 3 Auxiliary Pipes 1,488 l.m.
SPL - 4 Construction Manhole 8 unit
Sub-Total
Total - RUNWAY COMPLETION
3.2.2 PERIMETER ROAD
Part C Earthworks
100.0 Cutting of Trees 150 pc.
101.0 Clearing,Grubbing and Disposal 74,184 sq.m.
102.0 Excavation of Unsuitable Materials & Disposal 19,733 cu.m.
( t = 30 cm )
104-A Embankment from Site Excavation 7,953 cu.m.
104-B Embankment from Source 56,360 cu.m.
105.0 Sub - Grade Preparation 56,179 sq.m.
Sub-Total
Part D/E Subbase and Base Course/ Surface Courses
200.0 Aggregate Sub-Base Course (t = 15 cm ) 4,874 cu.m.
202.0 Crushed Aggregate Base Course ( t = 10 cm ) 4,405 cu.m.
301.0 Bituminous Prime Coat 71 ton
310.0 Bituminous Concrete Surface Course ( t = 5 cm ) 4,409 ton
SPL - 2 Pavement Marking Thermoplastic ( white & yellow ) 1,670 sq.m.
312.0 Top Soil & Sodding 10,500 sq.m.
Sub-Total
BOQ / Civil Works-Airside Page 17 of 70
DEPARTMENT OF TRANSPORTATION AND COMMUNICATION
TOTAL
CONSTRUCTION COST
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
Part H Miscellaneous Structures
1.0Road Barrier L=4.0m complete with barrier arm, joint, kit lighting, short
column, external photocell, module display assembly2 sets
2.0Road Barrier L=5.0m (3sets), L=6.0m (1set) complete with barrier arm,
kit lighting, short column, external photocell, module display assembly4 sets
Sub-Total
Total - PERIMETER ROAD
3.2.3 PERIMETER DRAINAGE
Part C Earthworks
102.0 Excavation of Existing Ground and Disposal 72,930 cu.m.
104-A Embankment From Site Excavation 1,390 cu.m.
Sub-Total
PART G Drainage and Slope Protection Structures
500.0 1 - 900 mm Φ RCP Class "II" DPWH Standard 45 l.m.
2 - 900 mm Φ RCP Class "II" DPWH Standard 13 l.m.
2 - 1070 mm Φ RCP Class "II" DPWH Standard 27 l.m.
1- 1220 mm Φ RCP Class "II" DPWH Standard 7 l.m.
2 - 1220 mm Φ RCP Class "II" DPWH Standard 12 l.m.
3 - 1220 mm Φ RCP Class "II" DPWH Standard 45 l.m.
500 - A 1 - 900 mm Φ RCP Wingwall (1) 2 pc.
2 - 900 mm Φ RCP Wingwall (2) 2 pc.
2 - 1070 mm Φ RCP Wingwall (3) 2 pc.
1- 1220 mm Φ RCP Wingwall (4) 2 pc.
2 - 1220 mm Φ RCP Wingwall (5) 2 pc.
3 - 1220 mm Φ RCP Wingwall (6) 2 pc.
Sub-Total
Total - PERIMETER DRAINAGE
3.2.4 GROUTED RIPRAP
505.0 Grouted Riprap Class "A" 5,400 l.m.
Total - GROUTED RIPRAP
3.2.5 DETENTION POND
102.0 Excavation of Existing Ground and Disposal 91,500 cu.m.
500.0 3 - 1220 mm Φ RCP 23 l.m.
500-A 3 - 1220 mm Φ RCP Wingwall 8 pc.
500-B Pave waterway (Grouted Riprap Class A) 65 cu.m.
312.0 Top Soil and Sodding 11,445 sq.m.
Total - DETENTION POND
BOQ / Civil Works-Airside Page 18 of 70
DEPARTMENT OF TRANSPORTATION AND COMMUNICATION
S U M M A R Y
3.1 PASSENGER TERMINAL BUILDING
DIV-02 SITE CONSTRUCTION 1 l.s.
DIV-03 CONCRETE WORKS 1 l.s.
DIV-04 MASONRY WORKS 1 l.s.
DIV-05 METAL WORKS 1 l.s.
DIV-06 WOOD AND PLASTIC 1 l.s.
DIV-07 THERMAL AND MOISTURE PROTECTION 1 l.s.
DIV-08 DOORS AND WINDOWS 1 l.s.
DIV-09 FINISHES 1 l.s.
DIV-10 SPECIALTIES 1 l.s.
DIV-12 FURNISHING 1 l.s.
DIV-15 MECHANICAL WORKS
15.1 Plumbing Works 1 l.s.
15.2Airconditioning & Ventilation, Fire Protection, Building Management
System including Testing and Commissioning1 l.s.
DIV-16 ELECTRICAL WORKS 1 l.s.
TOTAL COST -PASSENGER TERMINAL BUILDING
TOTAL
CONSTRUCTION COST
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
BOQ / Passenger Terminal Bldg. Page 19 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
3.1 PASSENGER TERMINAL BUILDING
DIV-02 SITE CONSTRUCTION
2.0 SITE WORKS
2.1.1 Building Layout 7,295 sq.m.
2.1.2 Structure Excavation 9,271 cu.m.
2.1.3 Backfilling and filling
2.1.3.1 Backfill excavations with suitable excavated materials 6,987 cu.m.
2.1.3.2 Gravel base; 150 mm thk 2,164 cu.m.
2.1.4 Soil Disposal
2.1.4.1 Remove surplus excavated material from site 2,284 cu.m.
2.1.5 Subgrade Preparation 11,092 sq.m.
2.1.6Anti-termite treatment to surfaces of ground and sides and bottoms of
excavations23,085 sq.m.
Total "DIV-02" - SITE CONSTRUCTION
DIV-03 CONCRETE WORKS
3.1 Cast-In-Place Structural Concrete
3.1.1 Reinforced concrete; 280 kg/cm2 or 4000 psi or 27.60 Mpa
3.1.1.1 Foundation, Wall Footing 1,188 cu.m.
3.1.1.2 Footing Tie Beam 667 cu.m.
3.1.1.3 Columns and Pedestal 685 cu.m.
3.1.1.4 Beams, Coping beams 739 cu.m.
3.1.1.5 Suspended Slab, ramp and canopy 1,065 cu.m.
3.1.1.6 Stiffeners columns, lintel and bond beam (Exterior Wall) 31 cu.m.
3.1.1.7 Elevator and Escalator Pit 92 cu.m.
3.1.1.8 Stairs 80 cu.m.
3.1.1.9 Equipment Pad 11 cu.m.
3.1.1.10 Counter top 10 cu.m.
3.1.1.12Concrete bleachers at plant box (including top ledge and beam
support)6 cu.m.
3.1.2 Reinforced concrete; 3000 psi or 21 Mpa
3.1.2.1 Slab-on-grade /fill 1,788 cu.m.
3.1.3 Reinforced concrete; 2000 psi or 14 Mpa
3.1.3.1 Lean Concrete 8 cu.m.
3.2 Reinforcement in concrete
3.2.1Steel bar reinforcement including cutting and bending, links, stirrups,
binders, and tie wires, etc; grade 60
3.2.1.1 Foundation, Wall Footing 182,612 kg.
3.2.1.2 Footing Tie Beam 186,082 kg.
3.2.1.3 Columns and Pedestal 122,730 kg.
3.2.1.4 Beams, Coping beams 211,775 kg.
3.2.1.5 Stiffeners columns, lintel and bond beam (Exterior Wall) 2,140 kg.
3.2.1.6 Stairs 7,761 kg.
3.2.1.7 Elevator and Escalator Pit 12,619 kg.
3.2.1.9 Suspended Slab, ramp and canopy 354 kg.
3.2.2Steel bar reinforcement including cutting and bending, links, stirrups,
binders, and tie wires, etc; grade 40
3.2.2.1 Foundation, Wall Footing 1,684 kg.
3.2.2.2 Footing Tie Beam 27,627 kg.
3.2.2.3 Columns and Pedestal 73,773 kg.
3.2.2.4 Beams, Coping beams 32,473 kg.
3.2.2.5 Suspended Slab, ramps and canopy 205,145 kg.
3.2.2.6 Stiffeners columns, lintel and bond beam (Exterior Wall) 2,502 kg.
3.2.2.7 Stairs 8,572 kg.
3.2.2.8 Equipment Pad 971 kg.
3.2.2.9 Counter top 1,878 kg.
3.2.2.10Concrete bleachers at plant box (including top ledge and beam
support)994 kg.
3.2.2.11 Slab on Grade 91,333 kg.
3.3 Formwork
3.3.1 Foundation, Wall Footing 1,387 sq.m.
3.3.2 Footing Tie Beam 3,590 sq.m.
3.3.3 Columns and Pedestal 3,477 sq.m.
3.3.4 Beams, Coping beams 4,486 sq.m.
3.3.5 Suspended Slab, ramps and canopy 8,272 sq.m.
3.3.6 Stiffeners columns, lintel and bond beam (Exterior Wall) 337 sq.m.
3.3.7 Stairs 605 sq.m.
3.3.8 Elevator and Escalator Pit 273 sq.m.
3.3.9 Counter top 142 sq.m.
3.3.11Concrete bleachers at plant box (including top ledge and beam
support)101 sq.m.
3.3.12 Slab on Grade /fill 376 sq.m.
3.3.13 Equipment Pad 18 sq.m.
3.4 Concrete Accessories
BOQ / Passenger Terminal Bldg. Page 20 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
3.4.1 Expansion joint with sealant; pre-formed type
3.4.1.1 At Slab-on-grade 2,067 l.m.
3.4.2 PVC Waterstop 88 l.m.
3.4.3 Non-shrink cement grout 3 cu.m.
Total "DIV-03" - CONCRETE WORKS
DIV-04 MASONRY WORKS
4.1 Accessories
4.1.1 Concrete Grout, 2000 psi 447 cu.m.
4.1.2Concrete lintel and bond beams inclusive of formworks and Steel
reinforcements, Grade 40 (For Interior Walls)108 cu.m.
4.1.3 CHB steel reinforcements, PNS 275 (Grade 40) 35,272 kg.
4.2 CHB
4.2.1 200mm thk (700 psi) 448 sq.m.
4.2.2 150mm thk (700 psi) - Interior Wall 3,136 sq.m.
4.2.3 100mm thk (350 psi / 2.5 N/mm2) 2,840 sq.m.
Total "DIV-04" - MASONRY WORKS
DIV-05 METAL WORKS
5.1
Main Roof Frame: Fabrication, delivery and erection of structural steel
roof framing, including girders, beams, purlins, batten supports, plates,
bolts, stiffeners, sagrods, cross bracings with turn buckles, paint and
other incidentals to complete
717,833 kg.
5.2Fabrication, delivery and erection of structural steel with bolts & nuts,
plates and all other incidentals to complete
5.2.1 Second Floor Frame (girders, beams) 416,003 kg.
5.2.2 Roof Canopy at @ 2nd Floor Level 90,722 kg.
5.2.3 Second Floor Lower Ceiling Frame 73,881 kg.
5.2.4 Steel Column 392,919 kg.
5.2.5 Welcome Pylon Signage 44,048 kg.
5.2.6 Skylight Roof framing 77,295 kg.
5.5
Boarding Bridge: Fabrication, delivery and erection of structural steel
members including girders, beams, joist, columns, plates, bolts, purlins
and all other incidentals to complete
101,881 kg.
5.6
Ramp: Fabrication, delivery and erection of structural steel members
including beams, joist, columns, plates, bolts and all other incidentals to
complete
44,582 kg.
5.71.20mm thick Galvanized Steel Deck inclusive of bended materials and
all incidental to complete.468 sq.m.
5.8 Steel Railings
5.8.1
40mm dia. Stainless steel horizontal pipe with 40mm dia. vertical and
horizontal members including all incidentals to complete (supply and
install) @ Access Ramp
36 l.m.
5.8.2
50mm dia. Stainless steel tube/handrail, with grab rail bracket and 12mm
thick tempered clear glass including all incidentals to complete (supply
and install) H=1.20m
165 l.m.
5.8.3Stair Steel Railing; 50mm dia. G.I. pipe handrail and post with 38mm dia.
Subrail including all incidentals to complete 69 l.m.
5.8.450mm dia. Stainless steel guard rail pipe including all incidentals to
complete (supply and install)1,117 l.m.
5.8.5
38mm dia. G.I. pipe, vertical and horizontal members with 25 x 6mm flat
bar subrail including paint and all incidentals to complete (supply and
install)
298 l.m.
5.8.6
50mm dia. G.I. pipe handrail, 32mm dia. Vertical pipe and 25mm dia.
subrail including paint and all incidentals to complete (supply and install)
H=1.10m at Welcome Pylon
43 l.m.
5.925 x 25mm tubular frame column accent including paint and all incidentals
to complete ; at check-in counter130 kg.
5.10 Miscellaneous Metals
5.10.1Steel Trellis: Fabrication, delivery and erection of structural steel with
bolts & nuts, plates and all other incidentals to complete
5.10.1.1 At check-in counter 3,819 kg.
5.10.1.2 At center lounge area 370 kg.
5.10.1.3 At 2F lounge area 24,421 kg.
5.10.2 Artificial plant hanger at 2F interior beam ; 12 sets 13,118 kg.
BOQ / Passenger Terminal Bldg. Page 21 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
5.10.3Ladder rung with cover including bolts, plates, paint and all incidentals to
complete at Pylon
5.10.3.1 Ladder Rung ; W=0.40m, H=13.40m, (Riser @ 0.3m c-c) 2 set
Total "DIV-05" - METAL WORKS
DIV-06 WOOD AND PLASTIC
6.1 Finish Carpentry
6.1.125mm thk. Wood plank for artificial plants, painted finish including all
incidentals to complete
6.1.1.1 W = 125mm ; at check-in counter trellis 45 l.m.
6.1.1.2 W = 150mm ; at check-in lounge area 229 l.m.
6.1.1.3 W = 300mm ; at interior column 8 l.m.
6.1.2 50 x 100mm solid wood trellis, painted finish 224 l.m.
6.2 Custom Cabinets
6.2.1
Counter base cabinet (at toilet partition); comprising :12mm thk. Marine
Plywood cabinet doors and shelves in wood frame including painting,
hardware and all other incidentals to complete (L=2500mm ; W=600mm ;
H = 1200mm)
3 set
6.2.2
Immigration Counter; comprising : 20mm thk. Plyboard counter, desk and
wall including formica laminates, swing door, hardware and all other
incidentals to complete (L = 2400mm ; W = 1900mm ; H = 1200mm) ;
glass door on separate item
5 set
6.3 31mm dia. Rattan pole accent (at interior column) 565 l.m.
Total "DIV-06" - WOOD AND PLASTIC
DIV-07 THERMAL AND MOISTURE PROTECTION
7.1 Dampproofing and Waterproofing
7.1.1 Damproofing vapor barriers, 1 layer 6 mils thick @ Slab on Grade 10,724 sq.m.
7.1.2 Waterproofing
7.1.2.1 Polyurethane based liquid applied waterproofing
7.1.2.1.1 25 mils for Canopy and Gutter 400 sq.m.
7.1.2.1.2 32 mils for Suspended Slab deck 1,876 sq.m.
7.1.2.1.3 40 mils for Toilet 428 sq.m.
7.1.2.2 Elastomeric waterproofing at elevator and escalator pits 218 sq.m.
7.3 Insulation
7.3.1 P.E. foam insulation for Roof 9,360 sq.m.
7.3.2
Roof Insulation - 50mm thk Mineral Wool Insulation with two sided
aluminum including chicken wire support and other consumable
accessories to complete
266 sq.m.
7.3.3Wall Insulation - 100mm thk Mineral Wool Insulation and other
consumable accessories to complete352 sq.m.
7.4 Roofing and Accessories
7.4.1Pre-painted horizontal roof sheet including bended materials, metal
capping and all incidentals to complete
7.4.1.1 To Main Roof 7,874 sq.m.
7.4.1.2 2nd Level Canopy 1,752 sq.m.
7.4.26mm thk. Polycarbonate skylight inclusive of all bended materials and
incidentals to complete
7.4.2.1 To Main Roof 1,776 sq.m.
Total "DIV-07"-THERMAL AND MOISTURE PROTECTION
DIV-08 DOORS AND WINDOWS
8.1 WINDOWS & CURTAINWALL
8.1.16mm thk. Tinted tempered glass on aluminum powder coated frame, fixed
window including all incidentals to complete
8.1.1.1 W1 ; 4844 x 3600mm 2 set
8.1.1.2 W2 ; 4856 x 3600mm 2 set
8.1.1.3 W3 ; 8700 x 3600mm 11 set
8.1.1.4 W4 ; 7988 x 3600mm 1 set
8.1.1.5 W5 ; 7517 x 3600mm 1 set
8.1.1.6 W6 ; 3017 x 3600mm 1 set
8.1.1.7 W7 ; 3488 x 3600mm 1 set
8.1.212mm thk. Clear tempered frameless glass panels including all incidentals
to complete
8.1.2.1 GP1 ; 8100 x 3600mm 14 set
8.1.2.2 GP1a ; 8150 x 3600mm 1 set
8.1.2.3 GP2 ; 3225 x 3600mm 1 set
8.1.2.4 GP3 ; 6750 x 3600mm 1 set
8.1.2.5 GP4 ; 6238 x 3600mm 1 set
8.1.2.6 GP5 ; 3275 x 3600mm 2 set
8.1.2.7 GP6 ; 17544 x 3600mm 2 set
8.1.2.8 GP7 ; 5268 x 3600mm 1 set
BOQ / Passenger Terminal Bldg. Page 22 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
8.1.2.9 GP8 ; 5592 x 3600mm 2 set
8.1.2.10 GP10 ; 3752 x 3600mm 1 set
8.1.2.11 GP11 ; 1520 x 3600mm 1 set
8.1.2.12 GP12 ; 6471 x 3600mm 1 set
8.1.2.13 GP13 ; 12778 x 3600mm 1 set
8.1.2.14 GP14 ; 8300 x 3600mm 8 set
8.1.2.15 GP15 ; 8579 x 3600mm 5 set
8.1.2.16 GP16 ; 8200 x 3600mm 5 set
8.1.2.17 GP17 ; 8439 x 3600mm 3 set
8.1.2.18 GP18 ; 17000 x 3600mm 3 set
8.1.2.19 GP19 ; 383 x 3600mm 2 set
8.1.312mm thk. Clear tempered frameless accordion glass panels including all
incidentals to complete
8.1.3.1 GP9 ; 17200 x 3600mm 3 set
8.1.412mm thk. Clear tempered frameless glass partitions with door openings
including all incidentals to complete
8.1.4.1GP at D1 ; 5980 x 3600mm (8100 less 2120 ; double leaf sliding door
on separate item)8 set
8.1.4.2GP at D2 ; 6270/6320/6130 x 3600mm (8390/8440/8250 less 2120 ;
double leaf sliding door on separate item)3 set
8.1.4.3GP at D3 ; 6180 x 3600mm (8300 less 2120 ; double leaf sliding door
on separate item)3 set
8.1.4.4GP at D4 ; 7040 x 3600mm (8100 less 1060 ; single leaf swing door on
separate item)2 set
8.1.4.5GP at D5 ; 7379 x 3600mm (8439 less 1060 ; single leaf swing door on
separate item)1 set
8.1.4.6GP at D6 ; 4293 x 3600mm (5353 less 1060 ; single leaf swing door on
separate item)2 set
8.1.4.7GP at D15 ; 1945 x 3600mm (3005 less 1060 ; single leaf swing door
on separate item)2 set
8.1.4.8GP at D16; 11324 x 3600mm (13444 less 2120 ; double leaf sliding
door on separate item)2 set
8.1.4.9GP at D17 ; 16040 x 3600mm (17100 less 1060 ; single leaf swing
door on separate item)1 set
8.1.4.10GP at D18 ; 2465 x 3600mm (3525 less 1060 ; single leaf swing door
on separate item)1 set
8.1.4.11GP at D19 ; 7240 x 3600mm (8300 less 1060 ; single leaf swing door
on separate item)1 set
8.1.4.12GP at D20 ; 7584 x 3600mm (8644 less 1060 ; single leaf swing door
on separate item)1 set
8.1.4.13GP at D21 ; 14384 x 3600mm (15444 less 1060 ; single leaf swing
door on separate item)1 set
8.1.4.14GP at D22 ; 10635 x 3600mm (14875 less 2x2120 ; double leaf swing
door on separate item)1 set
8.1.4.15GP at D23 ; 5515 x 3600mm (6575 less 1060 ; single leaf swing door
on separate item)1 set
8.1.4.16GP at D24 ; 7140 x 3600mm (8200 less 1060 ; single leaf swing door
on separate item)1 set
8.1.4.17GP at D25 ; 565 x 3600mm (1625 less 1060 ; single leaf swing door on
separate item)2 set
8.1.4.18 GP at D26 ; 2-383 x 3600mm (sliding door on separate item) 1 set
8.1.56mm thk. Tinted tempered glass on aluminum powder coated frame, fixed
and awning window including all incidentals to complete
8.1.5.1 W1 ; 4500 x 2150mm 36 set
8.1.66mm thk. Tempered clear glass on aluminum powder coated frame (sides
& bottom) L=8.60m, H=0.60m at immigration booth5 set
Sub-total "8.1" - WINDOWS
8.2 DOORS AND PANELS
8.2.1 Glass Door
8.2.1.1 12mm thk. Tempered Sliding Glass Door
8.2.1.1.1D-1,2,3,16; 2120 x 3600mm (Automatic double panel; excluding
automatic mechanism)16 set
8.2.1.1.2 D-26; 1000 x 3000mm (Manual single panel) 1 set
8.2.1.212mm thk tempered frameless swing glass door, single leaf including
stainless steel door locks, floor hinges and other incidentals to complete
8.2.1.2.1 D-4, 5,6, 15, 17-21, 23-25; 1060 x 3600mm 15 set
8.2.1.2.2 I.O. Counter ; 600 x 1800mm, including 38mm dia x 170mm handle 5 set
8.2.1.312mm thk tempered frameless swing glass door, double leaf including
stainless steel door locks, floor hinges and other incidentals to complete
8.2.1.3.1 D-22 ; 2120 x 3600mm 2 set
8.2.1.46mm thk. Tinted glass on aluminum analok frame with aluminum encased
grilles ; swing type
8.2.1.4.1 Check-in counter ; 800 x 1200mm 10 set
BOQ / Passenger Terminal Bldg. Page 23 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
8.2.2 Steel Door
8.2.2.1Single leaf swing metal door including door jamb and all incidentals to
complete painted finish (1hr fire rated)
8.2.2.1.1 D-7 ; 1200 x 2450mm 10 set
8.2.2.1.2 D-1 ; 900 x 2100mm 2 set
8.2.2.2Double leaf swing flush metal door with half louver including door jamb
and all incidentals to complete, painted finish
8.2.2.2.1 D-8 ; 2000 x 2400mm 5 set
8.2.2.3Single leaf swing flush metal door with bottom louver including door jamb
and all incidentals to complete, painted finish
8.2.2.3.1 D-9,10,14 ; 1000 x 2400mm 38 set
8.2.2.4Single leaf swing hollow core metal door including door jamb and all
incidentals to complete painted finish
8.2.2.4.1 D-11 ; 1000 x 2400mm (Dakota type) 8 set
8.2.2.4.2 D-12 ; 1000 x 2400mm (Lucas type) 32 set
8.2.2.5Double leaf swing hollow core metal door including door jamb and all
incidentals to complete painted finish
8.2.2.5.1 D-13 ; 2000 x 2400mm (Lucas type) 1 set
Sub-total "8.2" - DOORS AND PANELS
8.3 HARDWARES
8.3.1 Lockset
8.3.1.1 Automatic Door Mechanism 16 set
8.3.1.2 Cylindrical lever type lockset 84 set
8.3.1.3Panic device type 3 function 11 (with lever, key locks or unlocks control
lever)12 set
8.3.2 Closer
8.3.2.1 Surface Mounted Door Closer 102 set
8.3.3 Hinges
8.3.3.1 Butt hinges 114mm x 114mm (4 1/2 x 4 1/2) 408 pair
8.3.4 Door Accessories
8.3.4.1 Push & pull bars 19 set
8.3.4.2 Dummy lever handle 6 set
8.3.4.3 Push and Pull plate 5 set
8.3.4.4 Flushbolt (top and bottom of inactive door leaf) 6 set
8.3.4.5 Threshold
8.3.4.5.1 Panic threshold 12 set
8.3.4.5.2 Aluminum threshold 57 l.m.
8.3.4.5.3 At 150mm thk masonry wall 52 l.m.
8.3.4.5.4 At 200mm thk masonry wall 51 l.m.
Sub-total "8.3" - HARDWARES
Total "DIV-08" - DOORS AND WINDOWS
DIV-09 FINISHES
9.1 FLOOR FINISHES
9.1.1 Plain cement concrete steel trowel finish 376 sq.m.
9.1.2 Plain cement concrete steel trowel finish (to receive vinyl flooring) 1,182 sq.m.
9.1.3 300 x 300 x 3 mm thk Homogeneous Vinyl Floor Tiles, including tile
adhesive and other incidentals to complete1,182 sq.m.
9.1.4 Mortar Topping 50mm thk. (for waterproofed deck) 1,750 sq.m.
9.1.5 Mortar Topping 25mm thk. (for toilet and AHU) 596 sq.m.
9.1.6 Wiremesh 6mm dia.x100x100mm openings (for Mortar Topping 50mm) 1,750 sq.m.
9.1.7 Raised floor system 21 sq.m.
9.1.8300 x 300 Rubber tiles, including adhesive and other incidentals to
complete232 sq.m.
9.1.9 600 x 600mm polished granite tiles, including mortar bed and other
incidentals to complete10,704 sq.m.
9.1.10 600 x 298mm polished granite tiles, including mortar bed and other
incidentals to complete93 sq.m.
9.1.11 600 x 198mm polished granite tiles, including mortar bed and other
incidentals to complete56 sq.m.
9.1.12 300 x 300mm Paver tiles, including bed and other incidentals to complete 3,672 sq.m.
9.1.13 300 x 300mm unglazed ceramic tiles, including mortar bed and other
incidentals to complete1,724 sq.m.
9.1.14 300 x 300mm unglazed ceramic tiles, including mortar bed and other
incidentals to complete at Toilet468 sq.m.
9.1.15 300 x 300mm unglazed ceramic tiles with non skid nosing, including
mortar bed and other incidentals to complete at Stair107 sq.m.
9.1.16 200 x 200mm ceramic tiles, including mortar bed and other incidentals to
complete7 sq.m.
9.1.17 Abrasive strip nosing 229 l.m.
9.1.18 Rubber mat including adhesive and other incidentals to complete 180 sq.m.
BOQ / Passenger Terminal Bldg. Page 24 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
9.1.19 Plain cement floor finish (to receive rubber tiles and rubber mat) 412 sq.m.
Sub-total "9.1" - FLOOR FINISHES
9.2 WALL FINISHES
9.2.1 Plain cement plaster wall Painted Finish 10,019 sq.m.
9.2.2200 x 200mm ceramic tiles, including mortar bed and other incidentals to
complete8 sq.m.
9.2.3 Natural Stone cladding (Ledge stone) 317 sq.m.
9.2.4Digital printing ceramic board at toilets including mortar bed and other
incidentals to complete85 sq.m.
9.2.5Ceramic art of various airline logos ; 2700 x 1800mm at check-in counters
including mortar bed and other incidentals to complete8 set
9.2.6 300 x 300mm Glazed ceramic wall tiles (including mortar bed) 1,314 sq.m.
9.2.7 3.5mm Ficem board (on both sides) on metal framing system 377 sq.m.
9.2.9 Abuse resistant veneer plaster for painted finish 299 sq.m.
9.2.10600 x 600mm polished granite tiles, including mortar bed and other
incidentals to complete351 sq.m.
9.2.113.5mm Ficem board dropwall (on both sides) on metal framing system,
above exterior glass panels741 sq.m.
9.2.123.5mm Ficem board wall backing (single face) at rear pylon; structural
steel frame on separate item183 sq.m.
9.2.13Ecumenical Chapel wall, 3 layers (letterings on separate item) ; 3.5mm
ficem board on metal studs1 set
9.2.14
Accent wall of airlines at check-in counters ; 3.5mm ficem board on metal
studs (airline logos on separate item) ; 3700 x 3600mm ; 75mm & 100mm
thk.
8 set
Sub-total "9.2" - WALL FINISHES
9.3 CEILING FINISHES
9.3.1 3.5mm Ficem board on metal frame 2,047 sq.m.
9.3.2 3.5mm Ficem board secondary cover at lower 2nd floor ceiling 1,281 sq.m.
9.3.3 12mm thk. Moisture Resistant Gypsum Board on metal frame 644 sq.m.
9.3.4 Exposed Construction Painted Finish 910 sq.m.
9.3.5 Metal spandrel ceiling 5,639 sq.m.
9.3.6 600 x 600mm Acoustic board on powder coated T-runner frame 786 sq.m.
9.3.7 600 x 600mm Metal ceiling on powder coated T-runner frame 9,355 sq.m.
9.3.8Ceiling cove light housing; 12mm thick Gypsum board including framing
and all incidentals to complete339 sq.m.
9.3.9Ceiling cove light housing; 6mm ficem board including framing and all
incidentals to complete120 sq.m.
Sub-total "9.3" - CEILING FINISHES
9.4 BASE BOARD FINISHES
9.4.1 100mm high painted base 290 l.m.
9.4.2 PVC Baseboard, 100mm high 924 l.m.
9.4.5 Stainless steel Baseboard, 150mm high 24 l.m.
9.4.6 Stainless steel Baseboard, 300mm high 43 l.m.
9.4.7 100mm high epoxy paint 267 l.m.
Sub-total "9.4" - BASE BOARD FINISHES
9.5 PAINTING WORKS
9.5.1 At Floor
9.5.1.1 Epoxy floor system with hardener 489 sq.m.
9.5.2 At Wall
9.5.2.1 Painting on concrete surfaces, textured paint finish (exterior) 1,793 sq.m.
9.5.2.2 Painting on concrete surfaces, smooth paint finish (interior) 8,415 sq.m.
9.5.2.3 Painting on ficem board surfaces 905 sq.m.
9.5.3 At Ceiling
9.5.3.1 Semi-gloss paint finish 910 sq.m.
9.5.3.2 Painting on Fiber cement board surfaces 2,191 sq.m.
9.5.3.3 Painting on Gypsum board surfaces 1,139 sq.m.
9.5.4Painting on metal surfaces (metal doors, railings, gratings, grilles) - Epoxy
Paint1,379 sq.m.
9.5.5 Painting on wood doors 223 sq.m.
Sub-total "9.5" - PAINTING WORKS
Total "DIV-09" - FINISHES
DIV-10 SPECIALTIES
10.1 Countertops
10.1.1 Granite Countertop W=600mm 122 sq.m.
10.26mm thick Facial mirror on 6mm thick marine plywood backing inclusive
all incidentals to complete
10.2.1 600 x 1000mm 3 set
10.2.2 650 x 1000mm 9 set
10.2.3 1100 x 1000mm 1 set
10.2.4 1550 x 1000mm 4 set
10.2.6 2100 x 1000mm 3 set
BOQ / Passenger Terminal Bldg. Page 25 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
10.2.7 2180 x 1000mm 1 set
10.2.8 2195 x 1000mm 1 set
10.2.9 2200 x 1000mm 1 set
10.2.10 2355 x 1000mm 2 set
10.2.11 2955 x 1000mm 2 set
10.2.12 3175 x 1000mm 2 set
10.2.13 3880 x 1000mm 2 set
10.2.14 4140 x 1000mm 4 set
10.2.15 4350 x 1000mm 6 set
10.2.16 4750 x 1000mm 2 set
10.2.17 900 x 1800mm 2 set
10.2.18 1295 x 1800mm 2 set
10.2.19 1320 x 1800mm 1 set
10.2.20 1655 x 1800mm 1 set
10.2.21 2845 x 1800mm 4 set
10.3 Stainless Steel Grab bar at PWD Toilet 10 set
10.4
Toilet compartments/cubicles - comprising 12mm thk intermediate panels,
doors, and partitions/compartments (compact laminated phenolic board)
including all hardwares and accessories in nylon finish and all other
incidentals to complete
248 sq.m.
10.5 Phenolic Urinal Partition 400 x 1400mm 12 set
10.6 Plumbing Fixtures Accessories
10.6.1 Soap Holder 4 set
10.6.2 Paper Holder, wall mounted 72 set
10.6.3 Deck Type Liquid Soap Dispenser 79 set
10.6.4 Wall mounted baby changing station (folding) 5 set
10.7Modular Partition, inclusive of swing door and all other incidentals to
complete; at travel tax & ticket sales counters5 sq.m.
10.8Aluminum Composite Panel, inclusive of metal frame, sealant and all
incidentals to complete
10.8.1 Exterior and Interior Column 1,703 sq.m.
10.8.2 Roof Eaves 4,004 sq.m.
10.8.3 Exposed Beam at 2F Lower Ceiling 669 sq.m.
10.8.4 Exposed Beam at 2F Main Ceiling 2,438 sq.m.
10.8.5 Cylindrical Plant box 50 sq.m.
10.8.6 Welcome pylon signage 240 sq.m.
10.9 Roller Blinds 1,777 sq.m.
10.10
900mm dia x H =200mm clay pot with 3.5mm thk Fiber board wall on
steel angle frame including embedded plates, anchor bolts, paint and all
incidentals to complete
30 sq.m.
10.11 Signages including fixing material, frame and all incidentals to complete
10.11.1 Item 1 - ( ENT ) Entrance - Flush Wall mounted 2 set
10.11.2 Item 2 - ( TS ) Ticket Sales Office - Pendant mounted illuminated 1 set
10.11.3 Item 3 - ( TBC ) Ticket Baggage Check - Pendant mounted illuminated 1 set
10.11.4 Item 4 - ( TO ) Ticket Office - Pendant mounted illuminated 2 set
10.11.5Item 5 - ( BSC ) Baggage Security Check - Pendant mounted
illuminated4 set
10.11.6 Item 6 - ( IM ) Immigration - Pendant mounted 3 set
10.11.7Item 7 - ( INT'L ) International Pre-departure Lounge Area - Pendant
mounted2 set
10.11.8Item 8 - ( DOM ) Domestic Pre-departure Lounge Area - Pendant
mounted illuminated3 set
10.11.9Item 9 - ( G1, G2 ) G1, G2 Boarding Gates (International) - Pendant
mounted illuminated2 set
10.11.10Item 10 - ( G3 ) G3 Arrival Gate (International) - Pendant mounted
illuminated1 set
10.11.11Item 11 - ( G4, G5 ) G4, G5 Boarding Gates (Domestic) - Pendant
mounted illuminated2 set
10.11.12Item 12 - ( DEP ) Departure - Pendant mounted with pictogram of
airplane illuminated3 set
10.11.13Item 13 - ( AR ) Arrivals - Pendant mounted w/ pictogram of airplane
illuminated5 set
10.11.14Item 14 - ( BC (D) ) Baggage Claim (Domestic) - Pendant mounted
illuminated2 set
10.11.15Item 15 - ( BC (I) ) Baggage Claim (International) - Pendant mounted
illuminated3 set
10.11.16Item 16 - ( EL ) Elevator - Pendant mounted & flag mounted w/
pictogram7 set
BOQ / Passenger Terminal Bldg. Page 26 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
10.11.17Item 17 - ( ESC ) Escalator - Pendant flag mounted with pictogram of
escalator1 set
10.11.18Item 18 - ( SW ) Stairway - Flag mounted with pictogram of stair &
pendant mounted illuminated2 set
10.11.19Item 19 - ( FE ) Fire Exit - Flush wall mounted & flag mounted with
pictogram16 set
10.11.20Item 20 - ( T1 ) Restrooms - Pendant mounted w/ pictogram of
international symbol of man, woman & handicapped accessibility11 set
10.11.21Item 21 - ( T2 ) Female Toilet - Flush wall mounted with pictogram of
international symbol of woman10 set
10.11.22Item 22 - ( T3 ) Male Toilet - Flush wall mounted with pictogram of
international symbol of man10 set
10.11.23Item 23 - ( T4 ) PWD Toilet - Flush wall mounted with pictogram of
international symbol of handicapped accessibility5 set
10.11.24 Item 24 - ( PA ) Powder Area - Flag mounted with pictogram 5 set
10.11.25 Item 25 - ( DCA ) Diaper Changing Area - Flag mounted with pictogram 5 set
10.11.26 Item 26 - ( RN ) Room Name - Flush wall mounted 28 set
10.11.27 Item 27 - ( APO ) Authorized Personnel Only - Flush wall mounted 14 set
10.11.28 Item 28 - ( DS ) Danger Sign - Flush wall mounted 6 set
10.11.29Item 29 - ( CS ) Concessionaire - Flush wall mounted & pendant
mounted with pictogram5 set
10.11.30Item 30 - ( TB ) Telephone Booth - Flag mounted with pictogram &
pendant mounted illuminated8 set
10.11.31Item 31 - ( ATM ) Automated Teller Machine - Flag mounted with
pictogram2 set
10.11.32Item 32 - ( LA ) Lounge Area - Flush wall mounted & pendant mounted
illuminated6 set
10.11.33 Item 33 - ( VIP ) VIP Lounge - Flush wall mounted 1 set
10.11.34Item 34 - ( CBC ) Customs Baggage Check - Pendant mounted
illuminated2 set
10.11.35 Item 35 - ( TRY ) Trolley - Flag mounted with pictogram 5 set
10.11.36Item 36 - ( IC ) Information Counter - Pendant mounted & flag mounted
with pictogram6 set
10.11.37 Item 37 - ( EXT ) Exit - Flush wall mounted 5 set
10.11.38 Item 38 - ( DFS ) Duty Free Shop - Pendant mounted illuminated 1 set
10.11.39 Item 39 - ( EC ) Ecumenical Chapel - Flush wall mounted 1 set
10.11.40
BICOL INTERNATIONAL AIRPORT MABUHAY WELCOME Signage;
900 x 1800 Ceramic board art; W=17.50m, H=4.20m at rear pylon,
including mortar bed/adhesive and other incidentals to complete
1 set
10.12Door signs (metal plate) including fixing material and all incidentals to
complete
10.12.1 Ladies 10 set
10.12.2 Gentlemen 10 set
10.12.3 PWD 5 set
10.12.4 Common Toilet 3 set
10.12.5 Janitor's closet 5 set
10.13Stainless steel finish wall letterings at ecumenical chapel including fixing
materials, backing, and all incidentals to complete
10.13.1 "BE STILL and KNOW THAT I AM GOD… -PSALM 46:10" 1 set
10.13.2"PAY A VISIT TO THE ECUMENICAL CHAPEL for a SAFE
JOURNEY…"1 set
10.14
Mabuhay Entrance signage pylon ; inclusive of log cabins frame, stainless
steel signage, ceramic board art of perspective plan, paint, fixing
materials, mortar bed/adhesive and all other incidentals to complete (see
Landscaping)
1 set
10.15
Welcome Entrance signage pylon ; inclusive of log cabins frame, stainless
steel signage, ceramic board art of site development plan, paint, fixing
materials mortar bed/adhesive and all other incidentals to complete (see
Landscaping)
1 set
Total "DIV-10" - SPECIALTIES
DIV-12 FURNISHING
12.1 Public Furniture
12.1.1 Information Counter at Arrival Area (W=1m x L=3.5m) 2 set
12.1.2 Ticket Sales Counter (W=0.80m x L=7.20m) 1 set
12.1.3 Information /Assistance Desk (W=0.80m x L=4.80m) 1 set
12.1.4 Custom counter 2 set
12.1.5Ticket /Baggage check-in counters ; 3.5mm thk. Ficem board on metal
stud including paint and all incidentals to complete (see detail drawing)10 set
12.1.6 Boarding Gate Counter (W=0.85m x L=1.20m) 4 set
12.1.7 Lounge Seats ; 4 attached chairs 84 set
BOQ / Passenger Terminal Bldg. Page 27 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
12.1.8 Lounge Seats ; 6 attached chairs 8 set
12.1.9 Lounge Seats ; 8 attached chairs 181 set
12.1.10 Lounge Center Table ; 300 x 600mm 20 set
12.1.12 Lounge Center Table ; 800 x 1500mm 2 set
12.1.13 High chair with footring at Information /Taxi Counter 4 set
12.1.14 High chair with footring at Customs counter 4 set
12.1.15 High chair with footring at Information /Assistance Desk 2 set
12.1.16 High chair with footring at Check-in counters 20 set
12.1.17 High chair with footring at Boarding gates 8 set
12.1.18 Office chair at Immigration booth 10 set
12.1.19 Waiting chair at ticket sales 4 set
12.1.20 Office chair at Ticket sales 4 set
Total "DIV-10" - SPECIALTIES
BOQ / Passenger Terminal Bldg. Page 28 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
DIV-15 MECHANICAL WORKS
15.1 PLUMBING WORKS
15.1.1 PLUMBING FIXTURES
1Water closet elongated including seat and cover with flush valve fitting
complete with standard accessories14 set
2
Water closet elongated including seat and cover with exposed sensor
type flushmeter DC type power supply complete with standard
accessories
58 set
3Urinal wall-hung with flush valve fitting complete with standard
accessories3 set
4Urinal wall-hung with exposed sensor type flushmeter DC type power
supply complete with standard accessories17 set
5Under-the-counter-lavatory complete with single lever faucet, angle valve,
flexible hose, p-trap, drains and standard accessories7 set
6
Under-the-counter-lavatory complete with sensor faucet DC type power
supply, angle valve, flexible hose, p-trap, drains complete with standard
accessories
69 set
7Wall hung lavatory complete with faucet, angle valve, flexible hose, p-
trap, drains complete with standard accessories7 set
8
Wall hung lavatory complete with sensor faucet DC type power supply,
angle valve, flexible hose, p-trap, drains complete with standard
accessories
17 set
9 Shower set with valve and bath fittings 4 set
Sub-Total
15.1.2 DOMESTIC WATER PIPING
15.1.2.1
Polypropylene Pipe (PPR PN 20), including couplings, hangers, brackets,
clamps, u-bolts, supports, sleeves, paintings and other consumable
materials to complete as specified in Mechanical Drawings and Technical
Specifications.
1 100mm dia PPR Pipe 25 l.m.
2 75mm dia PPR Pipe 290 l.m.
3 65mm dia PPR Pipe 196 l.m.
4 50 mm dia PPR Pipe 255 l.m.
5 40 mm dia PPR Pipe 177 l.m.
6 32 mm dia PPR Pipe 209 l.m.
7 25 mm dia PPR Pipe 207 l.m.
8 20 mm dia PPR Pipe 296 l.m.
9 15 mm dia PPR Pipe 125 l.m.
15.1.2.2
Polypropylene Pipe Fittings (PPR PN 20), including paintings,
miscellaneous supports, consumable materials and other accessories to
complete
15.1.2.2.1 PPR Tee
1 100mm dia, PPR Tee 1 ea.
2 75 mm dia, PPR Tee 6 ea.
3 75 x 65 mm dia, PPR Tee 3 ea.
4 75 x 50 mm dia, PPR Tee 1 ea.
5 75 x 20 mm dia, PPR Tee 2 ea.
6 65 mm dia, PPR Tee 3 ea.
7 65 x 50 mm dia PPR Tee 11 ea.
8 65 x 40 mm dia, PPR Tee 2 ea.
9 65 x 32 mm dia, PPR Tee 3 ea.
10 50 mm dia, PPR Tee 11 ea.
11 50 x 40 mm dia, PPR Tee 1 ea.
12 50 x 32 mm dia, PPR Tee 19 ea.
13 50 x 25 mm dia, PPR Tee 2 ea.
14 50 x 20 mm dia, PPR Tee 2 ea.
15 40 mm dia, PPR Tee 2 ea.
BOQ / Passenger Terminal Bldg. Page 29 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
16 40 x 32 mm dia, PPR Tee 30 ea.
17 40 x 25 mm dia, PPR Tee 13 ea.
18 40 x 20 mm dia, PPR Tee 12 ea.
20 32 mm dia, PPR Tee 110 ea.
21 32 x 25 mm dia, PPR Tee 13 ea.
22 32 x 20 mm dia, PPR Tee 20 ea.
24 25 mm dia, PPR Tee 5 ea.
25 25 x 20 mm dia, PPR Tee 6 ea.
26 25 x 15 mm dia, PPR Tee 24 ea.
27 20 mm dia, PPR Tee 43 ea.
28 20 x 15 mm dia, PPR Tee 43 ea.
29 15 mm dia, PPR Tee 115 ea.
15.1.2.2.2 Reducer
1 100 x 65 mm dia, PPR Reducer 1 ea.
2 75 x 65 mm dia, PPR Reducer 2 ea.
3 75 x 50 mm dia, PPR Reducer 1 ea.
4 75 x 40 mm dia, PPR Reducer 1 ea.
5 75 x 32 mm dia, PPR Reducer 1 ea.
6 65 x 50 mm dia, PPR Reducer 1 ea.
7 65 x 40 mm dia, PPR Reducer 2 ea.
8 65 x 32 mm dia, PPR Reducer 1 ea.
9 50 x 40 mm dia, PPR Reducer 13 ea.
10 50 x 32 mm dia, PPR Reducer 3 ea.
11 50 x 20 mm dia, PPR Reducer 1 ea.
12 40 x 32 mm dia, PPR Reducer 24 ea.
13 40 x 20 mm dia, PPR Reducer 2 ea.
14 40 x 15 mm dia, PPR Reducer 2 ea.
15 32 x 25 mm dia, PPR Reducer 5 ea.
16 32 x 20 mm dia, PPR Reducer 98 ea.
17 32 x 15 mm dia, PPR Reducer 3 ea.
18 25 x 20 mm dia, PPR Reducer 28 ea.
19 20 x 15 mm dia, PPR Reducer 147 ea.
15.1.2.2.3 Adapter
1 Female adapter 15 mm dia. 131 ea.
2 Female adapter 20 mm dia. 56 ea.
3 Female adapter 25mm dia. 20 ea.
4 Female adapter 38 mm dia. 104 ea.
15.1.2.2.4 End Cap
1 25mm dia. 96 ea.
2 20mm dia. 115 ea.
15.1.2.2.5 90 deg. Bend
1 100 mm x 90 deg. PPR Bend 1 ea.
2 75 mm x 90 deg. PPR Bend 5 ea.
3 65 mm x 90 deg. PPR Bend 2 ea.
4 50 mm x 90 deg. PPR Bend 37 ea.
5 40 mm x 90 deg. PPR Bend 29 ea.
6 32 mm x 90 deg. PPR Bend 43 ea.
7 25 mm x 90 deg. PPR Bend 19 ea.
8 20 mm x 90 deg. PPR Bend 43 ea.
9 15 mm x 90 deg. PPR Bend 7 ea.
BOQ / Passenger Terminal Bldg. Page 30 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
15.1.2.2.6 Hosebibb
1 20 mm dia (@ AHU Rooms) 4 ea.
2 15 mm dia ( Irrigation) 4 ea.
1 15 mm dia (Slop Sink Faucet) 5 ea.
15.1.2.2.7 Sleeve Type Coupling/ Union
2 100 mm dia, Sleeve Type Coupling 1 ea.
3 75 mm dia, Sleeve Type Coupling 2 ea.
4 65 mm dia, PPR Union 1 ea.
5 50 mm dia, PPR Union 15 ea.
6 40 mm dia, PPR Union 3 ea.
7 32 mm dia, PPR Union 7 ea.
8 25 mm dia, PPR Union 8 ea.
9 20 mm dia, PPR Union 23 ea.
15.1.2.2.8
Gates Valves and devices including grooves / flanges, gasket, bolts &
nuts, adaptors, tagging, sealant and all other necessary accessories to
complete the system
1 100 mm dia Gate Valve 1 ea.
2 75 mm dia Gate Valve 2 ea.
3 65 mm dia Gate Valve 1 ea.
4 50 mm dia Gate Valve 15 ea.
5 40mm dia Gate Valve 3 ea.
6 32mm dia Gate Valve 7 ea.
7 25mm dia Gate Valve 8 ea.
8 20 mm dia Gate Valve 23 ea.
15.1.2.2.9 Water Hammer Arrester
1 Type A 44 ea.
2 Type B 13 ea.
3 Type C 11 ea.
15.1.2.3NON-POTABLE WATER TANK AND BOOSTER STATION (piping,
fittings and miscellaneous items and valves)
15.1.2.3.1 G.I. Pipe and Fittings
1 150 mm dia 9 I.m.
2 100 mm dia 15 I.m.
3 75 mm dia 2 I.m.
4 50 mm dia 1 l.m.
15.1.2.3.2 Tee
1 150 mm dia, Tee 3 ea.
2 150 X 75 mm dia, Tee 2 ea.
3 150 X 50 mm dia, Tee 1 ea.
4 100 mm dia, Tee 1 ea.
5 100 X 75 mm dia, Tee 2 ea.
6 100 X 50 mm dia, Tee 1 ea.
15.1.2.3.3 90 deg. Bend
1 150 mm x 90 deg. Bend 2 ea.
2 100 mm x 90 deg. Bend 4 ea.
15.1.2.3.4 PVC Pipe and Fittings
1 300 mm dia uPVC Pipe 6 l.m
2 200 mm dia uPVC Pipe 57 l.m
15.1.2.3.5 90 deg. Bend
1 300 mm x 90 deg. Bend 2 ea.
2 200 mm x 90 deg. Bend 1 ea.
15.1.2.3.6 Reinforced Concrete Pipe, includes trenching, bedding, disposal, etc.
BOQ / Passenger Terminal Bldg. Page 31 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
1 450 mm dia. RCP 34 l.m.
15.1.2.3.7 Valves and Accessories
1 100mm dia Float valve 2 ea.
2 100mm dia Equalizing Valve 1 ea.
3 150mm dia Gate Valve 4 ea.
4 100mm dia Gate Valve 4 ea.
5 75mm dia Gate Valve 4 ea.
6 50mm dia Gate Valve 2 ea.
7 100mm dia Check Valve 2 ea.
8 75mm dia Check Valve 2 ea.
9 50mm dia Check Valve 1 ea.
10 Water Level Indicator 2 set
11 Blind Flange, 150mm dia. 3 ea.
12 Blind Flange, 100mm dia. 1 ea.
13 Flange, 150mm dia. 36 ea.
14 Flange, 100mm dia. 53 ea.
15 Flexible connector 75 mm dia 2 ea.
16 Flexible connector 50 mm dia 1 ea.
17 Vortex Plate 150 mm dia 2 ea.
18 Pressure gauge 1 ea.
19 Air Relief valve 1 ea.
20 100mm dia. Flow Meter 1 ea.
21 Air Vent, 100 mm dia 2 ea.
15.1.2.3.9 Rain water Vortex Filter, 300mm dia 2 ea.
15.1.2.3.10 Drainage Check Valve, 200 mm dia 1 ea.
15.1.2.3.11 Trench Grating 400 x 1500, Cast Iron 1 ea.
15.1.2.3.12 Junction Box (675 x 675 x 1500 mm) 1 ea.
Sub – Total
15.1.3 SANITARY WASTE PIPING
15.1.3.1
Unplasticized Polyvinyl Chlorine (uPVC) Pipe conforming to ASTM D2729
Series 1000m including hangers and supports and other necessary
accessories to complete the system
1 150 mm dia Soil/Waste uPVC Pipe 193 I.m.
2 100 mm dia Soil/Waste uPVC Pipe 473 I.m.
3 75 mm dia Soil/Waste uPVC Pipe 330 I.m.
4 50 mm dia Waste uPVC Pipe 517 I.m.
15.1.3.2 uPVC Wye
1 150 uPVC Wye 6 ea.
2 150 x 100mm uPVC Wye 7 ea.
3 150 x 75mm uPVC Wye 2 ea.
4 150 x 50mm uPVC Wye 4 ea.
5 100 mm uPVC Wye 42 ea.
6 100 x 75 mm uPVC Wye 82 ea.
7 100 x 50 mm uPVC Wye 100 ea.
8 75 mm uPVC Wye 10 ea.
9 75 x 50 mm uPVC Wye 104 ea.
15.1.3.3 90 deg Bend
1 150 mm dia, 90 deg uPVC Bend 1 ea.
2 100 mm dia, 90 deg uPVC Bend 40 ea.
10.1 75 mm dia, 90 deg uPVC Bend 75 ea.
10.1 50 mm dia , 90 deg uPVC Bend 119 ea.
15.1.3.4 45 deg Bend
BOQ / Passenger Terminal Bldg. Page 32 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
1 150mm dia., 45 deg uPVC Bend 13 ea.
2 100mm dia, 45 deg uPVC Bend 81 ea.
3 75 mm dia, 45 deg uPVC Bend 45 ea.
4 50 mm dia, 45 deg uPVC Bend 134 ea.
15.1.3.5 Reducer
1 150 x100 mm dia., uPVC Reducer 1 ea.
2 100 x 75 mm dia, uPVC Reducer 9 ea.
15.1.3.6 P- Trap
1 P- Trap, 100 mm dia 4 ea.
2 P- Trap, 75 mm dia 9 ea.
3 P- Trap, 50 mm dia 80 ea.
15.1.3.7 Sanitary Tee
1 50 mm dia, uPVC Santee 117 ea.
2 75 x 50 mm ø , uPVC Tee 70 ea.
3 50 mm ø , uPVC Tee 82 ea.
15.1.3.8 Clean Out
1 150 mm dia Floor Clean Out 5 ea.
2 100 mm dia Floor Clean Out 22 ea.
3 75 mm dia Floor Clean Out 11 ea.
4 50 mm dia Floor Clean Out 2 ea.
5 100 mm dia Ground Clean Out 4 ea.
6 100 mm dia Wall Clean Out 4 ea.
7 150 mm dia Wall Clean Out 1 ea.
Sub-Total
15.1.4 VENT PIPING
15.1.4.1
Unplasticized Polyvinyl Chlorine (uPVC) Pipe conforming to ASTM D2729
Series 1000, including hangers and supports and other necessary
accessories to complete the system
1 150 mm dia uPVC Pipe 6 I.m.
2 100 mm dia uPVC Pipe 300 I.m.
3 75 mm dia uPVC Pipe 106 I.m.
4 65 mm dia uPVC Pipe 51 I.m.
5 50 mm dia uPVC Pipe 1,110 I.m.
15.1.4.2 uPVC Tee
1 100 mm dia., uPVC Tee 6 ea.
2 100 x 75 mm dia , uPVC Tee 10 ea.
3 100 x 50 mm dia, uPVC Tee 30 ea.
4 75 mm dia, uPVC Tee 16 ea.
5 75 x 50 mm dia, uPVC Tee 161 ea.
7 50 mm dia, uPVC Tee 77 ea.
15.1.4.3 90 deg uPVC Bend
1 100 mm dia., 90 deg uPVC Bend 18 ea.
2 75 mm dia., 90 deg uPVC Bend 5 ea.
4 50 mm dia, 90 deg uPVC Bend 163 ea.
15.1.4.4 uPVC Reducer
1 150 x 100 mm dia, uPVC Reducer 2 ea.
2 100 x 75 mm dia, uPVC Reducer 12 ea.
3 100 x 50 mm dia, uPVC Reducer 3 ea.
5 75 x 50 mm dia, uPVC Reducer 15 ea.
15.1.4.5 Vent Thru Wall
2 100 mm dia 5 ea.
BOQ / Passenger Terminal Bldg. Page 33 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
3 75 mm dia 3 ea.
Sub-Total
15.1.5 STORM DRAINAGE PIPING
15.1.5.1
Unplasticized Polyvinyl Chlorine (uPVC) Pipe conforming to ASTM D2729
Series 1000, including hangers and supports and other necessary
accessories to complete the system
1 200 mm dia. uPVC Pipe 710 I.m.
2 150 mm dia. uPVC Pipe 123 I.m.
3 100 mm dia. uPVC Pipe 47 I.m.
15.1.5.2Unplasticized Polyvinyl Chlorine (uPVC) Pipe conforming to ASTM D2729
Series 1000, includes trenching, bedding, disposal, etc.
1 250 mm dia. uPVC Pipe 82 l.m.
15.1.5.3 Reinforced Concrete Pipe, includes trenching, bedding, disposal, etc.
1 300 mm dia. Reinforced Concrete Pipe 303 l.m.
2 375 mm dia. Reinforced Concrete Pipe 72 l.m.
15.1.5.4 uPVC Tee
1 200 x 100 mm dia, uPVC Tee 43 ea.
2 200 mm dia, uPVC Tee 42 ea.
4 200 mm dia, uPVC Wye 29 ea.
15.1.5.5 90 deg. uPVC Bend
1 200 mm dia 90 deg Bend 129 ea.
2 150 mm dia, 90 deg. Bend 71 ea.
4 150 mm dia, 45 deg. Bend 29 ea.
15.1.5.6 uPVC Reducer
1 200 x 150 mm dia, uPVC Reducer 71 ea.
15.1.5.7 Roof Strainers
1 Roof Strainer, 150 mm dia. 71 ea.
2 Roof Strainer, 100 mm dia. 43 ea.
15.1.5.8 Junction Box
1 Junction Box (900 x 900 x 1200 mm) 47 ea.
15.1.5.9 Ceiling Cleanout
1 200 mm dia. 42 ea.
2 100 mm dia. 8 ea.
3 75 mm dia. 8 ea.
15.1.5.10 Floor Drain
1 100mm dia. 4 ea.
2 50mm dia. 67 ea.
Sub-Total
15.1.6 FCU DRAIN
15.1.6.1 PVC Pipe with insulation
1 75 mm dia Waste uPVC pipe 5 I.m.
2 50 mm dia Waste uPVC pipe 20 I.m.
15.1.6.2 uPVC Fittings
1 50 mm dia, uPVC Tee 1 ea.
2 75 mm, uPVC Wye 1 ea.
4 50 mm, uPVC Wye 1 ea.
5 50 mm dia, 90 deg uPVC Bend 1 ea.
6 75 mm dia, 45 deg uPVC Bend 1 ea.
BOQ / Passenger Terminal Bldg. Page 34 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
7 50 mm dia, 45 deg uPVC Bend 4 ea.
8 75 x 50 mm dia, uPVC Reducer 1 ea.
9 Ceiling Cleanout, 75 mm dia. 1 ea.
10 Ceiling Cleanout, 50 mm dia. 1 ea.
15.1.6.3 uPVC Pipe drain
1 75 mm dia Waste uPVC pipe 79 I.m.
2 50 mm dia Waste uPVC pipe 20 I.m.
15.1.6.4 uPVC Fittings
2 75 mm uPVC Wye 2 ea.
3 75 x 50 mm uPVC Wye 4 ea.
4 50 mm uPVC Wye 6 ea.
5 75 mm dia, 90 deg uPVC Bend 1 ea.
6 50 mm dia, 90 deg uPVC Bend 8 ea.
7 75 mm dia, 45 deg uPVC Bend 10 ea.
8 50 mm dia, 45 deg uPVC Bend 14 ea.
9 75 x 50 mm dia, uPVC Reducer 1 ea.
10 Floor Cleanout, 75 mm dia. 1 ea.
11 Floor Cleanout, 50 mm dia. 4 ea.
Sub-Total
15.1.6 SUBMERSIBLE PUMPS
15.1.6.1@ Elevator Pit (3/4 HP Portable Submersible Sump Pump, Capacity =
15GPM, TDH=25ft)4 assy
15.1.6.2
Constant Pressure Booster System, Triplex Type vertical multi -stage
Centrifugal Pumps with one external frequency converter, complete with
34 Gallons bladder tank, air vent and other standard accessories. Pump
bases and heads are made of cast iron; other vital parts are made of
stainless steel. Total Capacity=250GPM x TDH=100 ft; 1-3.0
HP/2-5.0 HP; 230V; 3Phase;60Hz; 3500 RPM
1 assy
Sub-Total
TOTAL - PLUMBING WORKS
15.2HEATING, VENTILATION & AIR CONDITIONING/ FIRE PROTECTION/
BMS
15.2.1 Air Conditioning System
Equipment, see schedule for specifications (to include all other necessary
works to make the unit complete and operational.)Note: AHU/PAHU's are
with VFD motor and VFD Panel & LMCP (Bypass) for each Unit.
15.2.1.1 Chilled Water Type -Air Handling Unit
1 AHU-1 : Horizontal Draw Thru, Vertical Upblast, 14 TR 1 set
2 AHU-2 : Horizontal Draw Thru, Vertical Upblast, 9.5 TR 1 set
3 AHU-3 : Horizontal Draw Thru, Vertical Upblast, 14.72 TR 1 set
4 AHU-4 : Horizontal Draw Thru Vertical Upblast, 20 TR 1 set
5 AHU-5 : Horizontal Draw Thru Vertical Upblast, 55 TR 1 set
6 AHU-6 : Horizontal Draw Thru, Vertical Upblast, 11 TR 1 set
7 AHU-7 : Horizontal Draw Thru, Vertical Upblast, 11 TR 1 set
8 AHU-8 : Horizontal Draw Thru, Vertical Upblast, 48 TR 1 set
9 PAHU-1: Horizontal Draw Thru, Vertical Draw Thru, 38 TR 1 set
BOQ / Passenger Terminal Bldg. Page 35 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
10 PAHU-2: Horizontal Draw Thru, Vertical Draw Thru, 63 TR 1 set
11 PAHU-3: Horizontal Draw Thru, Vertical Draw Thru, 51 TR 1 set
12 PAHU-4: Horizontal Draw Thru, Vertical Draw Thru, 79 TR 1 set
15.2.1.2 Fan Coil Unit (Chilled Water Type)
FCU , Ceiling cassette free blow type, 0.25˚wg, chw ∆T10˚F
,230V,1PH,60Hz, & std accessories
1 FCU-1 : Ceiling Cassette Chw Type, 2 TR (Taxi Waiting LW ) 2 set
2 FCU-2 : Ceiling Cassette Chw Type, 2 TR (Taxi Waiting RW ) 2 set
3 FCU-3 : Ceiling Cassette Chw Type, 1 TR (Custom Officer ) 1 set
4 FCU-4 : Ceiling Cassette Chw Type, 1.5 TR (Airline Offices ) 8 set
5 FCU-5 : Ceiling Cassette Chw Type, 1.5 TR ( Conference Room ) 2 set
6 FCU-6 : Ceiling Cassette Chw Type, 2 TR ( Baggage Security Rm. ) 1 set
7 FCU-7 : Ceiling Cassette Chw Type, 2 TR ( Lounge ) 1 set
8 FCU-8 : Ceiling Cassette Chw Type, 2.5 TR ( POEA Rm. ) 1 set
9 FCU-10 : Ceiling Cassette Chw Type, 3.5 TR ( Ticket Sales ) 2 set
10 FCU-11 : Ceiling Cassette Chw Type, 1.5 TR ( Quarantine Room) 2 set
11 FCU-12 : Ceiling Cassette Chw Type, 2.4 TR ( Fixed Bridge ) 6 set
15.2.1.3
DX split type Air-conditioning Unit complete with support, hangers, base
and all necessary accessories as specified in the Mechanical Drawings
and Technical Specifications.
1FCU / ACCU -1A - B: 2.5 TR, Ceiling Suspended (VIP Room @ 2F
Level)1 set
2FCU / ACCU -1B: 2TR, Ceiling Suspended (Ecumenical Chapel @ 2f
Level)1 set
15.2.1.4
Multi-Split type Air-cooled Condensing Units; complete with C/W
refrigerant piping, drain pipe, insulation, pre-filter and remote controller
and all other necessary accessories, support/hangers/connections, base
as specified in the Mechanical Drawings and Technical Specifications.
1Variable Refrigerant Volume Type; Ceiling Suspended type; cooling
capacity 11.6 KW (4.0HP)2 set
2Variable Refrigerant Volume Type; Ceiling Suspended type; cooling
capacity 3.7 KW (1.3HP)2 set
3Variable Refrigerant Volume Type; Ceiling Suspended type; cooling
capacity 7.3 KW (2.5HP)1 set
4VRV IV Outdoor Unit R-410A refrigerant 16 series, Cooling only model,
380V-3ph-60 Hz 1 set
15.2.1.5 Galvanized Steel Duct including support
1 Ga 26 531 sq.m.
2 Ga 24 3,290 sq.m.
3 Ga 22 2,290 sq.m.
4 Ga 20 235 sq.m.
5 Ga 18 204 sq.m.
15.2.1.6 Flexible Duct Connector c/w supports and straps
1 350mm dia. 38 l.m.
2 300mm dia. 195 l.m.
3 250mm dia. 14 l.m.
4 200mm dia. 8 l.m.
5 150mm dia. 34 l.m.
15.2.1.7Duct fabric with properties of: Antibacterial, anti-static, fire retardant c/w
stainless cables, turn buckle and wire lock suspension support.
1 900 mm x 900 mm x 75 meter length 1 unit
2 1120 mm ф x 54 meter length 1 unit
3 1120 mm ф x 18 meter length 1 unit
4 900 mm x 900 mm x 45 meter length 1 unit
5 900 mm x 900 mm x 7 meter length 1 unit
15.2.1.8 Flexible Air Duct
BOQ / Passenger Terminal Bldg. Page 36 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
1 350mm dia. 23 l.m.
2 300mm dia. 118 l.m.
3 250mm dia. 9 l.m.
4 200mm dia. 45 l.m.
5 150mm dia. 20 l.m.
15.2.1.9 Fresh air duct with volume dampers, supports, w/o insulation, Ga.26 61 sq.m.
15.2.1.10Exhaust air duct with volume dampers, supports, etc. (w/o insulation),
Ga.26
1 800 x 400 mm 175 sq.m.
2 600 x 300 mm 67 sq.m.
3 550 x 300 mm 10 sq.m.
4 500 x 300 mm 25 sq.m.
5 200 x 150 mm 72 sq.m.
6 150 x 150 mm 57 sq.m.
7 375 mm dia. 6 l.m.
8 Flexible Air Duct, 150mm dia. 10 l.m.
15.2.1.11 AHU/PAHU Duct take-off / elbow -turning vanes
1 1500 x 500 4 no.
2 1500 x 450 1 no.
3 1350 x 750 1 no.
4 1350 x 450 1 no.
5 1250 x 750 1 no.
6 1250 x 450 1 no.
7 1200 x 550 1 no.
8 1000 x 500 1 no.
9 1000 x 400 1 no.
10 1000 x 250 2 no.
11 1100 x 500 2 no.
12 1100 x 450 1 no.
13 1000 x 450 2 no.
14 950 x 400 2 no.
15.2.1.11 Duct Insulation and Liner
1 Duct Insulation, 50 mm thick, rigid mineral fiber 48kg/ m3 density 6,550 sq.m.
2 Acoustical duct liner, 25 mm thk flexible unicellular rubber 655 sq.m.
15.2.1.12Variable Air Volume Unit c/w thermostat, step-down transformer & other
access.
1 VAV @ 1168 Lps (2,474 cfm ) 1 sets
2 VAV @ 968 Lps ( 2,050 cfm ) 6 set
3 VAV @ 776 Lps ( 1,644 cfm ) 4 set
4 VAV @ 684 Lps ( 1,452 cfm ) 5 sets
5 VAV @ 584 Lps ( 1,238 cfm ) 12 sets
6 VAV @ 560 Lps ( 1,186 cfm ) 10 sets
7 VAV @ 480 Lps ( 1,016 cfm ) 3 sets
8 VAV @ 400 Lps ( 848 cfm ) 5 sets
9 VAV @ 388 Lps ( 822 cfm ) 1 sets
10 VAV @ 290 Lps ( 614 cfm ) 6 sets
11 VAV @ 250 Lps ( 530 cfm ) 5 sets
12 VAV @ 200 -222 Lps ( 470 cfm ) 2 sets
13 VAV @ 156 -168 Lps ( 356 cfm ) 4 sets
14 VAV @ 111 -116 Lps ( 246 cfm ) 2 sets
BOQ / Passenger Terminal Bldg. Page 37 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
15.2.1.14 Supply Linear Bar Grille (SLBG) with OBD, c/w Plenum Boxes & liner
1 200 mm x 3.75 meter 8 set
2 150 mm x 1 meter 4 set
3 100 mm x 16 meter 2 set
15.2.1.15 Return Linear Bar Grille ( RLBG) with OBD c/w plenum boxes.
1 150 mm x 1 meter 1 set
2 100 mm x 16 meter 2 set
3 100 mm x 6.5 meter 1 set
15.2.1.16
Supply Ceiling Diffuser c/w OBD (Opposed Blade Damper), plenum
boxes & liner.
1 450 x 450 15 set
2 375 x 375 70 set
3 300 x 300 28 set
4 225 x 225 12 set
5 150 x 150 8 set
15.2.1.17 Return Ceiling Diffuser c/w OBD and plenum boxes
1 450 x 450 27 set
2 375 x 375 9 set
3 375 x 375 "Dummy" (w/o OBD) 15 set
4 300 x 300 19 set
5 225 x 225 3 set
6 150 x 150 4 set
15.2.1.18 Jet Diffuser c/w plenum boxes and liner
1 200 mm ф ( with 2- element ) 57 set
15.2.1.19 Fresh Air Intake Louver c/w Insect screen (exposed type -weatherproof)
1 1500 x 1200 1 set
2 1500 x 750 1 set
3 1500 x 550 2 set
4 1250 x 450 1 set
5 950 x 550 1 set
15.2.1.20 Exhaust Air Louver c/w insect screen (exposed -weatherproof)
1 375 mm dia. 1 set
2 1500 x 550 2 set
3 900 x 900 2 set
4 600 x 600 2 set
5 950 x 550 1 set
15.2.1.21 Ventilation Exhaust Air Diffuser (EAD)c/w plenum boxes
1 150 x 150 90 set
15.2.1.22 Duct Fire Damper -Curtain type ( 1 hr rated ) c/w access hole
1 1500 x 500 1 ea.
2 1500 x 450 1 ea.
3 1150 x 520 1 ea.
4 1250 x 750 1 ea.
5 1350 x 750 1 ea.
6 1250 x 500 1 ea.
7 1100 x 500 2 ea.
BOQ / Passenger Terminal Bldg. Page 38 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
8 1100 x 450 1 ea.
9 1000 x 500 1 ea.
10 1000 x 450 2 ea.
11 1000 x 400 1 ea.
12 950 x 400 2 ea.
13 750 x 500 3 ea.
14 700 x 600 1 ea.
15 600 x 500 1 ea.
15.2.1.22 Motorized Volume -Damper (@ AHU/PAHU's)
1 2790 x 620 mm 1 ea.
2 2480 x 620 mm 1 ea.
3 2170 x 460 mm 2 ea.
4 1860 x 465 mm 2 ea.
5 1860 x 310 mm 2 ea.
6 1550 x 310 mm 3 ea.
7 1240 x 310 mm 2 ea.
8 916 x 916 mm 2 ea.
9 818 x 818 mm 2 ea.
10 732 x 732 mm 2 ea.
11 524 x 524 mm 3 ea.
12 422 x 422 mm 2 ea.
13 378 x 378 mm 1 ea.
15.2.1.23 Chilled Water Piping (Internal of PTB)
15.2.1.23.1 Steel Pipe, ERW Sched 40 including fittings and support
1 250 mm ø 24 l.m.
2 200 mm ø 443 l.m.
3 150 mm ø 44 l.m.
4 100 mm ø 76 l.m.
5 75 mm ø 72 l.m.
6 65 mmø 23 l.m.
7 50 mm ø 274 l.m.
8 40 mm ø 109 l.m.
9 32 mm ø 76 l.m.
10 25 mm ø 44 l.m.
11 20 mm ø 64 l.m.
15.2.1.23.2Chilled Water Pipe Insulation, 50mm thk. Flexible closed cell elastomeric
thermal insulation as per ASTM C524 Type II Class 1 c/w Vapor Barrier.
1 250 mm ø 24 l.m.
2 200 mm ø 443 l.m.
3 150 mm ø 44 l.m.
4 100 mm ø 76 l.m.
5 75 mm ø 72 l.m.
6 65 mm ø 23 l.m.
7 50 mm ø 274 l.m.
8 40 mm ø 109 l.m.
9 32 mm ø 76 l.m.
10 25 mm ø 44 l.m.
11 20 mm ø 64 l.m.
15.2.1.23.3
Black Steel Pipe Fittings. ASTM - A 53. Schedule 40. including paintings
and other consumable materials to complete as specified in Mechanical
Drawings and Technical Specifications.
15.2.1.23.3.1 90° Bend
BOQ / Passenger Terminal Bldg. Page 39 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
1 200 mm ø 2 ea.
2 150 mm ø 20 ea.
3 125 mm ø 6 ea.
4 100 mm ø 22 ea.
5 75 mm ø 27 ea.
6 65 mmø 6 ea.
7 50 mm ø 40 ea.
8 40 mm ø 8 ea.
9 32 mm ø 24 ea.
10 25 mm ø 47 ea.
11 20 mm ø 8 ea.
15.2.1.23.3.2 45° Bend
1 150 mm ø 12 ea.
15.2.1.23.3.3 Tee
1 32 x 32mm dia. 4 ea.
2 25 x 25mm dia. 12 ea.
15.2.1.23.3.4 Tee Reducer
1 200 x 100 mm dia. 2 ea.
2 200 x 75 mm dia. 2 ea.
3 200 x 50 mm dia. 2 ea.
4 150 x 65 mm dia. 2 ea.
5 150 x 50 mm dia. 18 ea.
6 125 x 100 mm dia. 2 ea.
7 125 x 75 mm dia. 2 ea.
8 100 x 150 mm x 125 mm dia. 2 ea.
9 100 x 75 mm x 100 mm dia. 4 ea.
10 75 x 50 mm dia. 4 ea.
11 65 x 50 mm dia. 4 ea.
12 50 x 32 mm dia. 6 ea.
13 50 x 25 mm dia. 2 ea.
14 38 x 32 mm dia. 6 ea.
15 32 x 25 mm dia. 12 ea.
16 32 x 20 mm dia. 2 ea.
17 25 x 19 mm dia. 2 ea.
15.2.1.23.3.5 Coupling Reducer
1 200 x 150 mm dia. 2 ea.
2 150 x 100 mm dia. 2 ea.
3 100 x 65 mm dia. 2 ea.
4 75 x 50 mm dia. 2 ea.
5 65 x 50 mm dia. 2 ea.
6 50 x 40 mm dia. 8 ea.
7 50 x 32 mm dia. 2 ea.
8 50 x 25 mm dia. 4 ea.
9 50 x 20 mm dia. 2 ea.
10 40 x 32 mm dia. 4 ea.
11 32 x 25 mm dia. 4 ea.
15.2.1.23.3.6 End Cap
1 100 mm ø 4 ea.
2 75 mm ø 4 ea.
3 50 mm ø 2 ea.
4 32 mm ø 6 ea.
5 25 mm ø 8 ea.
6 15 mm ф 2 ea.
BOQ / Passenger Terminal Bldg. Page 40 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
15.2.1.23.4 Flexible Pipe Connector
1 100 mm ø 4 ea.
2 75 mm ø 8 ea.
3 50 mm ø 10 ea.
4 40 mm ø 2 ea.
5 32 mm ø 12 ea.
6 25 mm ø 14 ea.
7 20 mm ф 29 ea.
8 15 mm ф 4 ea.
15.2.1.25 Valves & Piping work including adaptors and flanges as required.
15.2.1.25.1 Butterfly Valve (Wafer type)
1 200 mmø 2 ea.
2 125 mmø 2 ea.
3 100 mmø 4 ea.
4 75 mm ø 10 ea.
5 65 mmø 2 ea.
15.2.1.25.2 Gate valve (Ball valve)
1 50 mm ø 10 ea.
2 40 mm ø 2 ea.
3 32 mm ø 12 ea.
4 25 mm ø 14 ea.
5 20 mm ø 30 ea.
6 15 mm ø 4 ea.
15.2.1.25.3
Auto Flow Control Valve (Balancing Valve ). Complete with stem
indicator, pressure taps, capable for shut-off, locking device, and body tap
for attaching drain hose.
1 125 mmø 2 ea.
2 100 mmø 6 ea.
3 75 mmø 6 ea.
4 65 mmø 2 ea.
5 50 mmø 13 ea.
6 40 mmø 4 ea.
7 32 mm ø 8 ea.
8 25 mm ø 11 ea.
9 20 mm ø 15 ea.
10 15 mm ø 2 ea.
15.2.1.25.4 Motorized 2-way control valve
1 100 mmø 2 ea.
2 75 mmø 4 ea.
3 50 mmø 10 ea.
4 40 mm ø 1 ea.
5 32 mm ø 6 ea.
6 25 mm ø 7 ea.
7 20 mm ø 15 ea.
8 15 mm ф 2 ea.
15.2.1.25.5 Wye Strainer with blow-off valve
1 100 mm ø 2 ea.
2 75 mm ø 4 ea.
3 50 mmø 5 ea.
4 40 mmø 1 ea.
5 32 mm ø 6 ea.
BOQ / Passenger Terminal Bldg. Page 41 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
6 25 mm ø 7 ea.
7 20 mm ø 15 ea.
8 15 mm ø 2 ea.
15.2.1.25.6 Auto Air Vent, c/w valve
1 200 mmø 2 ea.
2 125 mmø 2 ea.
3 100 mmø 6 ea.
4 75 mmø 8 ea.
5 65 mmø 2 ea.
6 50 mmø 10 ea.
7 40 mmø 2 ea.
8 32 mm ø 12 ea.
9 25 mm ø 14 ea.
10 20 mm ø 30 ea.
11 15 mm ø 4 ea.
15.2.1.26 Chw Piping Ancillaries
15.2.1.26.1 Pressure Gauge w/ pet cock & pressure gauge well
1 Tap to 200 mm ф 2 ea.
2 Tap to 125 mm ф 2 ea.
3 Tap to 100 mm ф 4 ea.
4 Tap to 75 mm ф 2 ea.
5 Tap to 65 mm ф 2 ea.
6 Tap to 50 mm ф 8 ea.
7 Tap to 40 mm ф 2 ea.
8 Tap to 32 mm ф 2 ea.
9 Tap to 25 mm ф 4 ea.
15.2.1.26.2 Pressure Gauge
1 Tap to 100 mm ф 2 ea.
2 Tap to 75 mm ф 8 ea.
3 Tap to 50 mm ф 10 ea.
4 Tap to 40 mm ф 2 ea.
5 Tap to 32 mm ø 12 ea.
6 Tap to 25 mm ø 14 ea.
7 Tap to 20 mm ø 30 ea.
8 Tap to 15 mm ф 4 ea.
15.2.1.26.3 Thermometer and well
1 Tap to 200 mm ф 2 set
2 Tap to 125 mm ф 2 set
3 Tap to 100 mm ф 4 set
4 Tap to 75 mm ф 2 set
5 Tap to 65 mm ф 2 set
6 Tap to 50 mm ф 8 set
7 Tap to 40 mm ф 2 set
8 Tap to 32 mm ф 2 set
9 Tap to 25 mm ф 4 set
15.2.1.26.4 Temperature Gauge
1 Tap to 100 mm ф 2 set
2 Tap to 75 mm ф 8 set
3 Tap to 50 mm ф 10 set
4 Tap to 40 mm ф 2 set
5 Tap to 32 mm ø 12 set
6 Tap to 25 mm ø 14 set
7 Tap to 20 mm ø 30 set
BOQ / Passenger Terminal Bldg. Page 42 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
8 Tap to 15 mm ф 4 set
15.2.1.27 Refrigerant Line System
15.2.1.27.1 Refrigerant Piping , copper Type L
1 9.52 mm ø copper, RL 43 l.m.
2 15.88 mm ø, RS 43 l.m.
15.2.1.27.2 Refrigerant Pipe insulation, flexible elastomeric rubber, 25 mm thk
1 9.52 mm ø copper RL 43 l.m.
2 15.88 mm ø copper , RS 43 l.m.
15.2.1.28 Condensate Drain Line System
15.2.1.28.1 Condensate Drain Piping, PVC pipe, sch 40, class 150 including fittings
1 50 mm ø 118 l.m.
2 25 mm ø 129 l.m.
15.2.1.28.2 Condensate Drain pipe insulation, 19 mm thk flexible elastomeric
1 50 mm ø 118 l.m.
2 25 mm ø 129 l.m.
15.2.1.28.3 Aluminum Pipe Cladding
1 15.88 mm Ø 15 l.m.
2 9.53 mmØ 15 l.m.
15.2.1.28.4 Fiter Dryer, 9.53 mm ø 2 set
15.2.1.28.5 Sight Glass, 9.53 mm ø 2 set
15.2.1.28.6 Flexible Pipe Connector
1 18.88mmø 4 set
2 9.53mmø 4 set
Sub - Total
15.2.2 Ventilation System
15.2.2.1 Fans and Blower Equipment
Equipment see schedule for specifications (to include all other necessary
works to make the unit complete and operational)
15.2.2.1.1
Return air fan, in-line centrifugal type, cabinet, complete with disconnect
switch, vibration isolator, support hangers and all necessary accessories
and connections
1 RAF-1, Return air fan NYB FC-DIDW with cabinet, in-line centrifugal
type, 7,500 CFM, ESP 0.50, 900 RPM, belt driven, 2.0 HP,
230V/1P/60Hz
1 set
2 RAF-2, Return air fan NYB FC-DIDW with cabinet, in-line centrifugal
type, 6180 CFM, ESP 0.50, 715 RPM, belt driven, 2.0 HP, 230V/1P/60Hz 1 set
3 RAF-3, Return air fan NYB FC-DIDW with cabinet, in-line centrifugal
type, 3200 CFM; ESP 0.625, 1960 RPM, belt driven, 1.50 HP,
230V/1P/60Hz
1 set
4 RAF-4, Return air fan NYB FC-DIDW with cabinet, in-line centrifugal
type, 6478 CFM; ESP 0.44, 1750 RPM, belt driven, 2.25 HP,
380V/3P/60Hz
1 set
5 RAF-5A, Return air fan FC-DIDW with cabinet, in-line centrifugal type,
348 CFM, ESP 0.25, 1245 RPM, direct driven, 0.50 HP, 230V/1P/60Hz 1 set
6
RAF-5B, Return air fan NYB FC-DIDW with cabinet, in-line centrifugal
type, 12749 CFM; ESP 0.75, belt driven, 1225 RPM, belt driven, 2.70 HP,
380V/3P/60Hz
1 set
7
RAF-6, Return air fan NYB FC-DIDW with cabinet, in-line centrifugal
type, 5766 CFM; ESP 0.50, belt driven, 1225 RPM, belt driven, 3.0 HP,
380V/3P/60Hz
1 set
8
RAF-7, Return air fan NYB FC-DIDW with cabinet, in-line centrifugal
type, 11446 CFM; ESP 0.75, belt driven, 1225 RPM, belt driven, 6.0 HP,
380V/3P/60Hz
1 set
9
RAF-8, Return air fan NYB FC-DIDW with cabinet, in-line centrifugal
type, 890 CFM, ESP 0.375, belt driven, 1225 RPM, belt driven, 1.0 HP,
230V/1P/60Hz
1 set
10
RAF-9, Return air fan NYB FC-DIDW with cabinet, in-line centrifugal
type, 890 CFM, ESP 0.375, belt driven, 1225 RPM, belt driven, 1.0 HP,
230V/1P/60Hz
1 set
BOQ / Passenger Terminal Bldg. Page 43 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
11
RAF-10, Return air fan NYB FC-DIDW with cabinet, in-line centrifugal
type, 18054 CFM, ESP 1.25, belt driven, 1225 RPM, belt driven, 6.0 HP,
380V/3P/60Hz
1 set
15.2.2.1.2
Transfer air fan, low nose, cabinet type, complete with disconnect switch,
vibration isolator, support hangers and all necessary accessories and
connections
1 TAF-1, Transfer air fan FC-DIDW with cabinet, low noise, 500 CFM, ESP
0.25, 1245 RPM, belt driven, 0.213 HP, 230V/1P/60Hz 1 set
2 TAF-2, Transfer air fan FC-DIDW with cabinet, low noise, 500 CFM, ESP
0.25, 1245 RPM, belt driven, 0.213 HP, 230V/1P/60Hz 1 set
3 TAF-3, Transfer air fan FC-DIDW with cabinet, low noise, 500 CFM, ESP
0.25, 1245 RPM, belt driven, 0.213 HP, 230V/1P/60Hz 1 set
15.2.2.1.3
Toilet Exhaust fan, low nose, cabinet type, complete with disconnect
switch, vibration isolator, support hangers and all necessary accessories
and connections
1 TEF-1/2, Toilet exhaust fan FC-DIDW with cabinet, low noise, 500 CFM,
ESP 0.25, 1245 RPM, direct driven, 0.213 HP, 230V/1P/60Hz 2 set
2 TEF-1A, Toilet exhaust fan NYB FC-DIDW with cabinet, low noise, 1246
CFM, ESP 0.60, 1380 RPM, belt driven, 0.50 HP, 230V/1P/60Hz 1 set
3 TEF-1B, Toilet exhaust fan NYB FC-DIDW with cabinet, low noise, 2475
CFM, ESP 0.52, 1530 RPM, belt driven, 0.75 HP, 230V/1P/60Hz 1 set
4 TEF-4, Toilet exhaust fan FC-DIDW with cabinet, low noise, 500 CFM,
ESP 0.25, 1245 RPM, direct driven, 0.213 HP, 230V/1P/60Hz 1 set
15.2.2.1.4
Smoke Removal Fan, spark-proof, in-line centrifugal type, complete with
backdraft damper, disconnect switch, vibration isolator, support hangers
and all necessary accessories and connections
1 SRF-1, Smoke Removal Fan, NYB tubular , in-line centrifugal type, 6478
CFM, ESP 1.0, 1750 RPM, belt driven, 2.25 HP, 380V/3P/60Hz 1 set
15.2.2.1.5
Skylight Heat Removal Fan (Exhaust Fan), in-line centrifugal type,
cabinet, complete with disconnect switch, vibration isolator, support
hangers and all necessary accessories and connections
1 SHR-1, NYB FC-DIDW with cabinet, in-line centrifugal type, 8700 CFM,
ESP 0.50, 1750 RPM, belt driven, 3.0 HP, 1200V/3P/60Hz 2 set
615.2.2.1.6
Skylight make-up air fan, in-line centrifugal type, cabinet, complete with
disconnect switch, vibration isolator, support hangers and all necessary
accessories and connections
1 SMA-1, NYB FC-DIDW with cabinet, in-line centrifugal type, 8700 CFM,
ESP 0.50, 1750 RPM, belt driven, 3.0 HP, 1200V/3P/60Hz 1 set
615.2.2.1.7 Air Curtains:
1 Air Curtain -1 Length = 1.20 m ; cap. =737 cfm; power = 312 watts 5 ea.
2 Air Curtain -1 Length = 0.90 m ; cap. =637 cfm; power = 312 watts 7 ea.
15.2.2.2.2 PVC duct
1 200 mmø 161 l.m.
2 100 mmø 14 l.m.
15.2.2.2.3 Vent Cap
1 200mm 12 set
2 100 mmø 7 sets
Sub - Total
15.2.3 Fire Protection System
15.2.3.1 Piping System
15.2.3.1.1 Black Steel Pipe, ERW schedule 40 with fitting and support
1 200 mm ø 48 l.m.
2 160 mm ø 156 l.m.
3 125 mm ø 12 l.m.
4 100 mm ø 789 l.m.
5 90 mm ø 30 l.m.
6 80 mm ø 21 l.m.
7 65 mm ø 735 l.m.
8 50 mm ø 321 l.m.
9 40 mm ø 1,450 l.m.
BOQ / Passenger Terminal Bldg. Page 44 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
10 32 mm ø 141 l.m.
11 25 mm ø 2,305 l.m.
15.2.3.2 Black Steel fitting
15.2.3.2.1 Tread-o-let
1 168 mm ø 2 pc.
2 80 mm ø 39 pc.
3 65 mm ø 18 pc.
4 50 mm ø 11 pc.
5 40 mm ø 141 pc.
6 32 mm ø 4 pc.
7 25 mm ø 69 pc.
15.2.3.2.2 Elbow
1 100 mm ø 19 pc.
2 80 mm ø 35 pc.
3 65 mm ø 76 pc.
4 50 mm ø 7 pc.
5 40 mm ø 144 pc.
6 32 mm ø 5 pc.
7 25 mm ø 1,918 pc.
15.2.3.2.3 Tee
1 160 mm ø 1 pc.
2 100 mm ø 19 pc.
3 65 mm ø 18 pc.
4 50 mm ø 97 pc.
5 40 mm ø 71 pc.
6 32 mm ø 66 pc.
7 25 mm ø 109 pc.
15.2.3.2.4 Tee Reducer
1 200 x 160 mm dia. 1 pc.
2 160 x 125 mm dia. 1 pc.
3 100 x 50 mm dia. 2 pc.
4 65 x 25 mm dia. 161 pc.
5 65 x 32 mm dia. 2 pc.
6 50 x 40 mm dia. 3 pc.
7 50 x 32 mm dia. 3 pc.
8 50 x 25 mm dia. 33 pc.
9 40 x 32 mm dia. 1 pc.
10 40 x 25 mm dia. 393 pc.
11 32 x 25 mm dia. 10 pc.
15.2.3.2.5 Reducer
1 200 x 168 mm dia, Reducer 1 pc.
2 160 x 125 mm dia, Reducer 2 pc.
3 125 x 90 mm dia, Reducer 1 pc.
4 100 x 90 mm dia, Reducer 1 pc.
5 100 x 50 mm dia, Reducer 16 pc.
6 90 x 80 mm dia, Reducer 3 pc.
7 80 x 65 mm dia, Reducer 2 pc.
8 65 x 40 mm dia, Reducer 1 pc.
9 65 x 50 mm dia, Reducer 3 pc.
10 50 x 40 mm dia, Reducer 22 pc.
11 50 x 32 mm dia, Reducer 1 pc.
12 50 x 25 mm dia, Reducer 3 pc.
13 40 x 32 mm dia, Reducer 35 pc.
BOQ / Passenger Terminal Bldg. Page 45 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
14 40 x 25 mm dia, Reducer 13 pc.
15 32 x 25 mm dia, Reducer 64 pc.
16 25 x 15 mm dia, Reducer 1,034 pc.
15.2.3.2.6 End cap
1 50 mm ø 20 pc.
2 40 mm ø 2 pc.
3 25 mm ø 4 pc.
15.2.3.3 Sprinkler Heads, k = 5.6 , 155˚ F temp rating (GF/2F)
1 Pendent 1,991 set
2 Upright 16 set
3 Sidewall 9 set
4 Sidewall Quick Response 100 set
Fire Hose Cabinet
1
Fire Hose Cabinet made from Ga.18 BI steel construction with glass
door, continuous steel hinge. Cabinet shall contain ø40cast brass
angle valve with 30 m of ø40 polyurethane singled line synthetic jacket
hose, brass nipple and coupling. Hose rack swivel type with pin and
water stop. NST thread for fire hose. Cabinet to contain one (1) 4.5 kg
abc dry chemical extinguisher.
38 set
15.2.3.5 Fire Extinguisher
1
FE-1 : 4.5 kg. Siliconized mono ammonium phosphate dry chemical
wall mounted multi- purpose portable fire extinguisher complete with
hose and horn, wall bracket, UL listed and FM approved.
30 set
2FE-2 : 4.5 kg. Carbon Dioxide portable fire extinguisher complete with
hose and horn, wall bracket, UL listed and FM approved.5 set
15.2.3.6 Sway Brace
15.2.3.6.1 Two-Way Sway Brace, Longitudinal (GF)
1 Two-way sway brace, 200mm dia. 6 set
1 Two-way sway brace, 150mm dia. 32 set
1 Two-way sway brace, 125mm dia. 2 set
1 Two-way sway brace, 100mm dia. 22 set
1 Two-way sway brace, 80mm dia. 12 set
1 Two-way sway brace, 65mm dia. 7 set
15.2.3.6.2 Two-Way Sway Brace, Longitudinal (2F)
1 Two-way sway brace, 100mm dia. (including Bar Joist Adapter) 153 set
15.2.3.6.3 Four-way sway brace
1 Four-way sway brace, 200mm dia. 2 set
2 Four-way sway brace, 100mm dia. 2 set
15.2.3.6.4 Sway Brace Pipe Support
15.2.3.6.4.1 Black Steel Pipe, ERW schedule 40
1 50 mm ø 486 l.m.
15.2.3.6 Valves and Accessories
15.2.3.6.1
ø100 mm Alarm Check Valve Assembly c/w pressure gages, switch,
alarm, gong, retard chamber, trimmings and other standard
accessories
2 set
15.2.3.6.2 150mmø OS&Y Gate Valve w/ supervisory switch 2 set
15.2.3.6.3 OS&Y Gate Valve w/ monitor switch, 100 mmø 2 set
15.2.3.6.4 Fire Dept. Connection, 100 x 65 x 65 ø 3 set
15.2.3.6.5 Zone control Valve Assembly w/ supervisory switch, ø100mm 4 set
15.2.3.6.6 Flow Switch, ø100mm 4 set
15.2.3.6.7 Check valve, 100mmø 1 set
15.2.3.6.8 Water flow detector 4 set
15.2.3.6.9 Flushing Connection
BOQ / Passenger Terminal Bldg. Page 46 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
1 50 mm ø 4 set
2 25 mm ø 4 set
15.2.3.6.10 Inspector Test Connection, ø25 mm 8 set
15.2.3.6.11 Mechanical Groove Coupling,
1 ø200 mm 2 set
2 ø150 mm 3 set
3 ø100 mm 1 set
4 ø80 mm 1 set
5 ø65 mm 1 set
15.2.3.6.12 Flexible Coupling
1 100 mm dia. 1 set
15.2.3.6.13 Gate Valve
1 100 mm dia. 1 set
2 50 mm dia. 1 set
3 40mmø 1 set
4 25mmø 7 set
15.2.3.6.14 Sight Glass , 25 mmø 12 set
15.2.3.6.15 Splash Block 2 lot
15.2.3.6.16 Painting 1 lot
15.2.3.7 FM 200 Fire Suppression System
Supply and Installation of Fire Suppression System (FM-200),
Including Cylinder Assemblies, Valves, Pipe & Fittings, Wires &
Conduit, Fire Alarm Control Panels & accessories and other
miscellaneous, consumable items to complete as specified in
Mechanical Drawings and Technical Specifications.
1 @ FIDS Room 1 lot
2 @ BGMPA Room 1 lot
3 @ BMS Room 1 lot
4 @ SEcurity Room 1 lot
Sub - Total
15.2.4 Building Management System
1To control and monitor status AHU's, VAV's, FCU's, Fans & Blowers,
CO2 sensor, sump, Fire Alarm, Elevator monitoring and accessories695 pt.
Sub - Total
15.2.5 Testing and Commissioning (ACV and FP) 1 lot
Sub - Total
TOTAL - HEATING, VENTILATION & AIR CONDITIONING/ FIRE
PROTECTION/ BMS
DIV-16 ELECTRICAL WORKS
16.1 Lighting System
16.1.1Roughing- ins (All necessary fittings, supports and other accessories are
already included from straight pipes)
3 20mmØ IMC 730 I.m.
4 20mmØ EMT 17,730 l.m.
5 15mmØ Flexible Metal Conduit 2,283 I.m.
16.1.2 Wires & Cables (Including connectors , tapes, etc)
1 30mm² THHN 160 I.m.
2 22mm² THHN 336 I.m.
3 5.5mm² THHN 1,502 I.m.
4 3.5mm² THHN 70,781 I.m.
5 8.0mm² TW (G) 124 I.m.
7 3.5mm² TW(G) 16,784 I.m.
16.1.3 Lighting Fixtures including necessary supports
BOQ / Passenger Terminal Bldg. Page 47 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
1
Type "P", Recessed Mounted Lighting Fixture With Parabolic Semi-
Specular Louver. 3 X 9w, T8 Led Tube, 230v, 60hz, Capital & Small
Letters Indicate Fixture Type & Controlling Switch, Respectively.
90 set
2 -Ditto-, Except With 2 X 9w, T8 Led Tube, 230v, 60hz. 120 set
3
Type "P", Recessed Mounted Lighting Fixture With Parabolic Semi
Specular Louver. 55 Cell, 3 X 22w, T8 Led Tube, 230v, 60hz, Capital &
Small Letters Indicate Fixture Type & Controlling Switch, Respectively.
14 set
4
Type "P", Recessed Mounted Lighting Fixture With Parabolic Semi
Specular Louver. 4 X 9w, T8 Led Tube, 230v, 60hz, Capital & Small
Letters Indicate Fixture Type & Controlling Switch, Respectively.
147 set
5Type "PO-1", Downlight, Aluminum Single Wall Construction, 172 Mmø,
With 1-39w Leds, 240v, 60 Hz.606 set
6Type "Po-7", Downlight, Aluminum Single Wall Construction, 172 Mmø,
With 1-9w Led's, Emitting Yellow Color Light, 240v, 60 Hz.55 set
7
Type "N2", Surface Mounted Led Tube Lighting Fixture, 2 X 22w, T8,
230v, 60 Hz; Housing: Fiberglass Reinforced Polyester; Lens:
Polycarbonate Lens, Ip 65 Rating; Gasket: Non-Thixotropic Polyol; Ceiling
Mounted Bracket: Stainless Steel; Complete With Electronic Ballast To
Support T8 Led Lamps.
20 set
8
Type "U", Consisting Of 1 Nos. 22w Led Tube Lighting Fixture, Yellow
Colored Light, Box Type, 230v, 60 Hz, For Cove Lighting At Waiting
Lounge
100 set
9
Type "P6", Track Light, Surface Mounted, With Electronic Gear For G12,
Ceramic \ Metal Halide Lamp, Lamp Housing Of Diecast Aluminum, Lamp
Type: Mt 35w, G12, Energy Consumption: 44 W, Form Of Protection: Ip
20, Class I, Color Temp.: 3000k, Ballast: Built-In, Safety Glass: Included,
Reflector: High Quality Anodized Cylindrical Reflector, Main (Input)
Voltage: 220-240 V, Beam Spread: Spot, Color: Black.
17 set
10
Type "U1", Uplighter, Surface Mounted, Powder Coated Aluminum Body,
Electronic Ballast In Separate Water Safe Casing, Quick Release
Between Fixture And Ballast For Fast Service And Assembly, Built-Lens
Protection, Multiple Rectangular Light Pictures Via Patented Prismatic
Lens System, Main: 220-240 Vac, Total Weight: 13 Gs Fixture Including
Ballast; Ip 66, Class I, Lamp Type: Led Individual Chips, Energy
Consumption: 232 Watts.
86 set
11
Type "U2", Uplighter, Surface Mounted, Powder Coated Aluminum Body,
Electronic Ballast In Separate Water Safe Casing, Quick Release
Between Fixture And Ballast For Fast Service And Assembly, Built-Lens
Protection, Multiple Rectangular Light Pictures Via Patented Prismatic
Lens System, Main: 220-240 Vac, Total Weight: 13 Gs Fixture Including
Ballast; Ip 66, Class I, Lamp Type: Led Individual Chips, Energy
Consumption: 120 Watts.
12 set
12
Type "P3", Led Downlight, With Separate Electronic Gear For leds, Chip
On Board, Color Rendering Index: +90, Lamp Housing: Aluminum For
Optimal Cooling, Long Lifetime And Low Weight, Form Of Protection: Ip
20, Class Iii, Color Rendering Index: +90, Operating Position: Vertical,
Energy Consumption: 49.8 W, 220-240 V, 60 Hz, Color Temperature:
3000k, Control Gear: Electronic Ballast: Separate.
55 set
BOQ / Passenger Terminal Bldg. Page 48 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
13
Type "WW", Wall Washer Downlight, Maxi Tube, Wall Up/Down,
Dimensions: 175 Mm Ø X 269 Mm High, Body Components: Extruded
And Die-Cast Aluminum, Highly Corrosion Resistant To Any Extreme
Environment, Ip Protection: Ip 65 Class I, Protected From Ingress Of Dust
And Water, Used Both Outdoor And Indoor Environments, Luminaire: 6
Led 16.8 Watts 700 Ma 864 Lumens, 3000k, 7 Deg., 220-240v, 60 Hz.
212 set
14
Type "P7", Recessed Rotating Led Downlight, With Separate Nl Power
Led Gear And 16 High Power leds, Lamp Housing: Die-Cast Aluminum
For Optimal Cooling, Long Lifetime And Low Weight, Form Of Protection:
Ip 20, Class Iii, With Polycarbonate Lens Operating Position: Vertical,
Energy Consumption: 39 W, 220-240 V, 60 Hz, Color Temperature:
3000k, Control Gear: Electronic, Ballast: Separate.
16 set
15
Type "P8", Retractable And Rotating Led Downlight, With Separate
Electronic Led Gear And 16 High Power leds, Lamp Housing: Die-Cast
Aluminum For Optimal Cooling, Long Lifetime And Low Weight, Form Of
Protection: Ip 20, Class Iii, With Polycarbonate Lens Operating Position:
Vertical, Energy Consumption: 48 W, 220-240 V, 60 Hz, Color
Temperature: 3000k, Control Gear: Electronic, Ballast: Separate.
3 set
16Type "X", Exit Light, 2 X 8w T8 Led Tube, Shaded Quadrant Indicates
Face And Direction Respectively.73 set
17Type "I", Industrial Type With Heavy Gauge Apertured Reflector, 2 X 22w
T8 Led Tube, 230v, 60hz.67 set
18Type "V", Vaportight Industrial Type With Internal Prismatic Lens, 2 X
22w T8 Led Tube, 230v, 60hz.102 set
19Type "N" Led Tube Lighting Fixture, 2 X 32w, T8, 230v, 60hz, With Cut-
Off Parabolic Louver41 set
20-Same As Type"C"- Except Type "K", Wet Location Listed White Trim
With Fresnel Lens.219 set
211x22w Led Tube Lighting Fixture, Box Type, Emitting Yellow Colored
Light, 230v, 60hz12 set
22 Emergency Lighting Fixture, With 2 X 9w Par 36 Lamp, 230v, 60hz. 107 set
16.1.4 Box & Wiring Devices
1 Octagonal Box 2,315 ea.
2 Utility Box 185 ea.
3 Switch Bank "A1" : Consist of the ff: 1 set
6 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, TWO-GANG.
4 Switch Bank "B1" : Consist of the ff: 1 set
8 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, SINGLE-
GANG.
11 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, TWO-GANG.
3 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, THREE-
GANG.
5 Switch Bank "C1" : Consist of the ff: 1 set
11 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, TWO-GANG.
2 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, THREE-
GANG.
6 Switch Bank "D1" : Consist of the ff: 1 set
3 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, SINGLE-
GANG.
10 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, TWO-GANG.
5 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, THREE-
GANG.
7 Switch Bank "E1" : Consist of the ff: 1 set
4 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, SINGLE-
GANG.
13 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, TWO-GANG.
BOQ / Passenger Terminal Bldg. Page 49 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
2 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, THREE-
GANG.
8 Switch Bank "A2" : Consist of the ff: 1 set
9 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, TWO-GANG.
1 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, THREE-
GANG.
9 Switch Bank "B2" : Consist of the ff: 1 set
6 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, TWO-GANG.
1 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, THREE-
GANG.
10 Switch Bank "C2" : Consist of the ff: 1 set
18 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, TWO-GANG.
2 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, THREE-
GANG.
11 Switch Bank "D2" : Consist of the ff: 1 set
17 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, TWO-GANG.
2 sets of light switch, 15A, 230V, 1P, GROUNDING TYPE, THREE-
GANG.
12 Light switch, 15A, 230V, 1P, GROUNDING TYPE, SINGLE-GANG. 100 set
13 DITTO, EXCEPT TWO GANG 37 set
14 DITTO, EXCEPT THREE GANG 9 set
15 DITTO, EXCEPT THREE-WAY, SINGLE GANG 11 set
16 DITTO, EXCEPT THREE-WAY, TWO GANG 16 set
17 DITTO, EXCEPT THREE-WAY, THREE GANG 3 set
18 Convenience Outlet for Emergency Lamp 101 set
19 Testing and Commissioning 1 lot
Sub - Total
16.2 Power System
16.2.1Roughing- ins (All necessary fittings, supports and other accessories are
already included from straight pipes)
1 90mmø IMC 60 l.m.
5 40mmø IMC 303 l.m.
8 20mmø IMC 13,147 l.m.
10 15mmø Flexible Metal Conduit 384 l.m.
11 40mmø IMC Flexible Metal Conduit 16 l.m.
16.2.2 Wires & Cable (including Connectors, Tapes, Etc.)
1 250mm² THHN 100 I.m.
2 200mm² THHN 840 I.m.
3 150mm² THHN 50 I.m.
4 100mm² THHN 100 I.m.
6 50mm² THHN 100 I.m.
7 38mm² THHN 100 I.m.
8 30mm² THHN 100 I.m.
9 22mm² THHN 1,172 I.m.
11 5.5mm² THHN 5,892 I.m.
12 3.5mm² THHN 31,866 I.m.
16 50mm² TW(G) 250 I.m.
17 30mm² TW(G) 100 I.m.
19 14mm² TW(G) 30 I.m.
20 8.0mm² TW(G) 363 I.m.
21 5.5mm² TW(G) 1,473 I.m.
22 3.5mm² TW(G) 11,896 I.m.
16.2.3 Boxes & Wiring Devices
1 Octagonal Box 550 ea.
2 Utility Box 126 ea.
3 Duplex convenience outlet, 20A, 2P, 3W, 230V, Grounding type 260 set
4 Ditto except weatherproof type 6 set
5 Ditto except floor mounted type 190 set
16.2.4 Board & Equipment
1MDP - PT1: 400V,3Ø, 3+N+G, 60Hz, 145KAIC, Nema 1 Encl, Floor
Mounted1
assembl
y
Main: 3200AT / 4000AF, 3P, AIR CIRCUIT BREAKER
Branches: 2-1000AT / 1200AT, 3P
1 - 800AT / 1200AF, 3P
1 - 400AT / 400AF, 3P
3 -50AT / 100AF, 3P
BOQ / Passenger Terminal Bldg. Page 50 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
2MDP - PT2: 400V,3Ø, 3+N+G, 60Hz, 145KAIC, Nema 1 Encl, Floor
Mounted1 assembly
Main: 3200AT / 4000AF, 3P, AIR CIRCUIT BREAKER
Branches: 1-1200AT / 1200AF, 3P
1-800AT / 1200AF, 3P
1 - 300AT / 400 AF, 3P
1 - 150 AT / 225 AF, 3P
1 - 100AT / 100AF, 3P
2-50AT / 100AF, 3P
1 - 30AT / 100AF, 3P
3DPPT: 230V, 3ø, 3W+G, 60Hz, 25KAIC, Nema 1 Encl, Surface
Mounted1 assembly
Main: 2500AT / 3200AF, 3P, MCCB
Branches: 1-500AT / 600AF, 3P
1-300AT / 400AF, 3P
6-175AT / 225AF, 3P
2-150AT / 225AF, 3P
2-125AT / 225AF, 3P
1-100AT / 100AF, 3P
1-30AT / 100AF, 3P
1 - TVSS , 100kA / phase
4 LPPT1A: 400/230V, 3Ø, 4W+G, 60Hz, 18KAIC, Nema 1 Encl, Surface 1 assembly
Main: 80AT / 100AF, 3P
Branches: 16-20AT / 100AF, 1P
5LPPT1B: 400/230V, 3Ø, 4W+G, 60Hz, 18KAIC Nema 1 Encl, Surface
Mounted1 assembly
Main: 100AT / 100AF, 3P
Branches: 24-20AT / 100AF, 1P
6LPPT1C: 400/230V, 3Ø, 4W+G, 60Hz, 18KAIC Nema 1 Encl, Surface
Mounted1 assembly
Main: 150T / 225AF, 3P
Branches: 21-20AT / 100AF, 2P
1-50AT / 100AF, 3P
7LPPT1D:400/230V, 3Ø, 4W+G, 60Hz, 18KAIC Nema 1 Encl, Surface
Mounted1 assembly
Main: 100AT / 100AF, 3P
Branches: 22-20AT / 100AF, 1P
9LPPT1F: 400/230V, 3ø, 4W+G, 60Hz, 18KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 180AT / 100AF, 3P
Branches: 22-20AT / 100AF, 1P
10LPPT1G: 400/230V, 3ø, 4W+G, 60Hz, 18KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 180AT / 100AF, 3P
Branches: 22-20AT / 100AF, 1P
11LPPT2A: 400/230V, 3ø, 4W+G, 60Hz, 18KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 80AT / 100AF, 3P
Branches: 18-20AT / 100AF, 1P
12LPPT2B: 400/230V, 3ø, 4W+G, 60Hz, 18KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main : 80AT / 100AF, 3P
Branches 12-20AT / 100AF,1P
14LPPT2D: 400/230V, 3ø, 4W+G, 60Hz, 18KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 80AT / 100AF, 3P
Branches: 18-20AT / 100AF, 1P
15LPPT2E: 400/230V, 3ø, 4W+G, 60Hz, 18KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 80AT / 100AF, 3P
Branches: 18-20AT / 100AF, 1P
16LPPT2F: 400/230V, 3ø, 4W+G, 60Hz, 18KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 80AT / 100AF, 3P
Branches: 18-20AT / 100AF, 1P
17LPPT2G: 400/230V, 3ø, 4W+G, 60Hz, 18KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 80AT / 100AF, 3P
Branches: 18-20AT / 100AF, 1P
18PPPT1A: 400/230V, 3ø, 4W+G, 60Hz, 35KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main : 225AT / 275AF, 3P
Branches: 11-100AF/50AT,3P
1-30AT / 100AF, 3P
BOQ / Passenger Terminal Bldg. Page 51 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
2-30AT / 100AF, 3P
1-TVES, 50KA/PHASE
19PPPT1B: 400/230V, 3ø, 4W+G, 60Hz, 25KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 100AT / 100AF, 3P
Branches: 24-20AT / 100AF, 1P
20PPPT1C: 400/230V, 3ø, 4W+G, 60Hz, 25KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 100AT / 100AF, 3P
Branches: 18-20AT/100AF, 1P
21PPPT1D: 400/230V, 3ø, 4W+G, 60Hz, 25KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 100AT / 100AF, 3P
Branches: 24-20AT / 100AF, 1P
22PPPT1E: 400/230V, 3ø, 4W+G, 60Hz, 25KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 100AT / 100AF, 3P
Branches: 24-20AT / 100AF, 1P
23PPPT1F: 400/230V, 3ø, 4W+G, 60Hz, 25KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 100AT / 100AF, 3P
Branches: 24-20AT / 100AF, 1P
24PPPT1H: 400/230V, 3ø, 4W+G, 60Hz, 35KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main: 300AT / 400AF, 3P
Branches: 1-100AT / 100AF, 3P
7-50AT/100AF, 3P
7-50AT/100AF, 3P
7-50AT/100AF, 3P
TVES, 50KA/PHASE
25PPPT1I: 230V, 3ø, 4W+G, 60Hz, 35KAIC, Nema 1 Enclosure, Surface
Mounted1 assembly
Main: 125AT / 225AF, 3P
Branches: 20-20AT / 100AF, 3P
TVES, 50KA/PHASE
26PPPT1J: 230V, 3ø, 4W+G, 60Hz, 35KAIC, Nema 1 Enclosure, Surface
Mounted1 assembly
Main: 125AT / 225AF, 3P
Branches: 20-20AT / 100AF, 3P
TVES, 40KA/PHASE
27PPPT1K: 230V, 3ø, 4W+G, 60Hz, 35KAIC, Nema 1 Enclosure, Surface
Mounted1 assembly
Main: 300AT / 400AF, 3P
Branches: 20-20AT / 100AF, 3P
TVES, 40KA/PHASE
28PPPT2A: 400/230V, 3ø, 4W+G, 60Hz, 25KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main : 100AT / 100AF, 3P
Branches: 24-20AT/100AF, 1P
29PPPT2B: 400/230V, 3ø, 4W+G, 60Hz, 25KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main : 100AT / 100AF, 3P
Branches: 24-20AT/100AF, 1P
30PPPT2C: 400/230V, 3ø, 4W+G, 60Hz, 42KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main : 250AT / 400AF, 3P
Branches: 1-100AT / 100AF, 3P
1-100AT / 100 AF, 3P
1-150AT / 100AF, 3P
6-20AT/100AF, 3P
TVES, 50KA/PHASE
31PPPT2D: 400/230V, 3ø, 4W+G, 60Hz, 42KAIC, Nema 1 Enclosure,
Surface Mounted1 assembly
Main : 300AT / 400AF, 3P
Branches: 2-100AT/100AF, 3P
7-50AT / 100 AF, 3P
7-50AT / 100 AF, 3P
3-20AT / 100AF, 3P
32 ECB 20AT, 100AF 1P, 230V, 60Hz, NEMA 1 Enclosure, Surface Mounted 4 assembly
33 -DITTO- but NEMA 3R 400V/60Hz 6 assembly
34ECB 100AT, 100AF 3P, 400V 60Hz, NEMA 1 Enclosure, Surface
Mounted3 assembly
35 -DITTO- but 50AT/100AF/3P 19 assembly
36 -DITTO- but 20AT/100AF/3P 5 assembly
BOQ / Passenger Terminal Bldg. Page 52 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
37ECB, 50AT, 100AF, 3P, 400V, 60Hz, NEMA 3P Enclosure, Surface
Mounted16 assembly
38 -DITTO- but 20AT 20 assembly
39Dry Type Transformer, WYE-DELTA, 75KVA,3P,400V Primary-230V
Secondary, 60Hz including 100mm high, concrete pad1
assembl
y
40 Cable Tray (All necessary fittings, supports and other accessories are
40.1Cable Tray, Ladder Type 600mmW x 150mmD x 2400mL, GA. 16 with
rung spacing of 300mm max. (Straight, 2.4m / Length)25 lgth.
40.2Cable Tray, Ladder Type 600mmW x 150mmD, GA. 16 with rung spacing
of 300mm max. (Bend 90 deg.)4 lgth.
40.3 Pre-fabricated pull box, 200x600x1000 GA. 16 4 ea.
41 Testing and Commissioning 1 lot
Sub - total
16.3 Gounding System (Auxiliary System Included)
16.3.1Roughing-ins (all necessary fittings, supports and other accessories are
already included from straight pipes)
1 63 mmø uPVC 15 l.m.
2 50 mmø uPVC 66 l.m.
3 32 mmø uPVC 9 l.m.
4 25 mmø uPVC 81 l.m.
16.3.2 Wires & Cables (including connectors, etc.)
1 100mm² Medium Drawn Bare Copper Wire 660 I.m.
2 100mm² TW 15 l.m.
3 50mm² TW 100 l.m.
4 30mm² TW 10 l.m.
5 22mm² TW 33 l.m.
6 14mm² TW 56 I.m.
7 8mm² TW 45 l.m.
16.3.3 Grounding
1 20 mmø x 3048 mm long Copper Bonded Ground Rod 74 set
2 Ground Test Well 5 set
3 Air Terminal Lightning Arrester, ESE Type 1 set
4 Exothermic Welded Joint, CADWELD
Type "GT" Cable to Ground Rod 70 set
Type "TA" Cable to Cable 47 set
Type "RJ" Cable to Rebar 47 set
16.3.4 Testing and Commissioning 1 lot
Sub - Total
16.4 Fire Alarm System
16.4.1Roughing-Ins (All necessary fittings, supports and other accessories are
already included from straight pipes)
1 20mmø IMC pipes 2,130 I.m.
2 15mmø Flexible Metal Conduit 140 I.m.
16.4.2 Boxes
1 Octagonal Box, 50 mm x 100 mm x 54 mm 285 ea.
2 Utility box, 50 mm x 100 mm x 54 mm 92 ea.
3 Pullbox (200mm x 325mm x 175mm) 2 ea.
16.4.3 Wires & Cables (including connectors etc.)
1 2.0mm² TW wire 1,110 I.m.
2 1.25mm² Shielded Twisted Pair, Fire Rated Cable 2,240 I.m.
16.4.4 FA Equipment & Devices
1 Fire Alarm Horn with Strobe Light 20 set
2 Manual Pull Station, Break Glass Type 22 set
3 Smoke Detector 272 set
4 Smoke Detector, Duct Type 12 set
5 Fire Alarm Control Panel, Addressable Type (FACP) with TVSS 1 set
6 Zone addressable module 32 set
7 Heat Detector 20 set
16.4.5 Testing and Commissioning 1 lot
Sub - Total
16.5 Telephone System
16.5.1Roughing-ins(All necessary fittings, supports and other accessories are
already included from straight pipes)
1 20 mmø PVC 125 l.m.
2 25 mmø PVC 699 l.m.
3 32 mmø PVC 2,790 l.m.
BOQ / Passenger Terminal Bldg. Page 53 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
4 63 mmø PVC 5 l.m.
5 75 mmø PVC 10 l.m.
6 90 mmø PVC 10 l.m.
7 110 mmø PVC 100 l.m.
16.5.2 Wires & Cables (including connectors , etc.)
1 4-pairs x 0.64mm, UTP Cable, Cat6a 7,252 l.m.
2 25-Pairs, 24AWG UTP MULTI-PAIR CABLE, CAT6A 36 l.m.
16.5.3 Boxes
1 Utility box 90 ea.
2 Pullbox(256x296x182) 1 ea.
3 Pullbox(504x389x213) 1 ea.
4 Pullbox(200x175x175) 1 ea.
16.5.4 Devices
1 Double Work Station outlet, Voice Direct Line(RJ11) & Data Line (RJ45) 67 set
2 ditto except floor mounted 43 set
3 ditto except voice only 22 set
16.5.5 Equipment
1 MTTC 1 assembly
2 MDF 1 assembly
3 IDF-P1 1 assembly
4 PABX 1 assembly
16.5.6 Testing and Commissioning 1 lot
Sub - Total
16.6 Public Address System
16.6.1Roughing-ins(All necessary fittings, supports and other accessories are
already included from straight pipes)
1 20mmø IMC 1,992 l.m.
2 15mmø FMC 165 l.m.
16.6.2 Wires & Cables (Including connectors, etc)
1 2.0mm2 Shielded Twisted Pair 2,189 l.m.
16.6.3 Boxes
1 Octagonal Box 96 ea.
2 Utility Box 10 ea.
3 Pullbox (256x182x182) 1 ea.
4 Pullbox (256x410x182) 1 ea.
16.6.4 PA Devices
1PA Equipment (incl. 5-100W ampl., dvd/cd player, usb, mixer frame, mic.
Pre amplifiers, power supply, mounting raCK, remote microphone, etc.)1 lot
2 10 watt Speaker, Cone Type Ceiling Mounted 48 set
3 10 watt Speaker, Cone Type Wall Mounted 26 set
4 Horn Type Speaker, 15W 13 set
16.6.5 Testing and Commissioning 1 lot
Sub - Total
16.7 CATV System
16.7.1Roughing-ins(All necessary fittings, supports and other accessories are
already included from straight pipes)
1 25 mm ø PVC 786 l.m.
16.7.2 Wires & Cables (including, connectors, etc)
1 CAT 6E UTP Cable, 4 pairs 812 l.m.
2# 540 Series Jacketed Coaxial Cable with Integral Messenger wire(By
Service Provider)88 l.m.
16.7.3 Boxes and CATV Devices
1 Utility Box 22 ea.
2 Pull Box (500x500x182) 1 ea.
3 Pull Box (910x910x200) 1 ea.
4 CATV System 1 set
16.7.4 Testing and Commissioning 1 lot
Sub- Total
16.8 CCTV System
16.8.1Roughing-ins(All necessary fittings, supports and other accessories are
already included from straight pipes)
1 20mmø IMC 6,319 l.m.
16.8.2 Wires & Cables (including, connectors, etc)
1 CAT 6E UTP Cable 4 Pairs 6,437 l.m.
16.8.3 Boxes
1 Junction Box 76 ea.
16.8.4 CCTV Devices
BOQ / Passenger Terminal Bldg. Page 54 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
1 Fixed CCTV Camera Dome Type 43 ea.
2 Zoom Pan Tilt CCTV Camera Dome Type 33 ea.
3
CCTV Equipments (including Power Supply, TVSS and 7 -16ch NVR
LED Monitor, Camera Controller, Network Switch, CPU & NVR Server
PC.)
1 lot
16.8.5 Testing and Commissioning 1 lot
Sub- Total
16.9 Flight Information Display System
16.9.1Roughing-ins(All necessary fittings, supports and other accessories are
already included from straight pipes)
1 20 mmø IMC 1,128 l.m.
16.9.3 Wires & Cables (including connectors, etc.)
1 CAT 6E UTP Cable, 4 Pairs 1,180 l.m.
16.9.4 Flight Information Display System Devices
1FID LCD 32" (including monitor, display system, ups, transmitter,receiver,
mounting support & other accs needed)2 set
2FID LCD 46" (including monitor, display system, ups, transmitter,receiver,
mounting support & other accs needed)11 set
3FID LCD 62" (including monitor, display system, ups, transmitter,receiver,
mounting support & other accs needed)1 set
4FIDS console (including computer, software, server, monitor, hub, spare
& other accs to complete the system)1 set
16.9.5 Testing and Commissioning 1 lot
Sub - Total
16.10 Master Clock System
16.10.1 Roughing-ins(All necessary fittings, supports and other accessories are
1 20 mmø IMC 816 l.m.
16.10.2 Boxes
1 Junction Box 20 ea.
2 Pull Box, 300x500x200mm 2 l.m.
16.10.3 Wires & Cables (including connectors, etc.)
1 CAT 6E UTP Cable, 4 Pairs 8,162 l.m.
16.10.4 Clock System devices mounted wall clock unit 16 ea.
16.10.5 Master Electric Clock Equipments
1
Master Clock System including time control center, wired control,
extended battery back-up module, interface module, UPS, close bay rack
and all miscellaneous as specified in Electrical Drawings and Technical
Specifications.
1 lot
16.10.7 Testing and Commissioning 1 lot
Sub - Total
TOTAL - ELECTRICAL WORKS
BOQ / Passenger Terminal Bldg. Page 55 of 70
DEPARTMENT OF TRANSPORTATION AND COMMUNICATION
S U M M A R Y
3.1 ARRIVAL & DEPARTURE
DIV-02 SITE CONSTRUCTION 1 l.s.
DIV-03 CONCRETE WORKS 1 l.s.
DIV-04 MASONRY WORKS 1 l.s.
DIV-05 METAL WORKS 1 l.s.
DIV-07 THERMAL AND MOISTURE PROTECTION 1 l.s.
DIV-08 DOORS AND WINDOWS 1 l.s.
DIV-09 FINISHES 1 l.s.
DIV-10 SPECIALTIES 1 l.s.
DIV-12 FURNISHING 1 l.s.
DIV-15 MECHANICAL WORKS
15.1 Plumbing Works 1 l.s.
15.2Airconditioning & Ventilation, Fire Protection System including Testing
and Commissioning1 l.s.
DIV-16 ELECTRICAL WORKS 1 l.s.
TOTAL COST -ARRIVAL & DEPARTURE
TOTAL
CONSTRUCTION COST
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
BOQ / Arrival & Departure Page 56 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
3.1 ARRIVAL & DEPARTURE
DIV-02 SITE CONSTRUCTION
2.0 SITE WORKS
2.1.1 Building Layout 486 sq.m.
2.1.2 Structure Excavation 382 cu.m.
2.1.3.1 Backfill excavations with suitable excavated materials 297 cu.m.
2.1.3.2 Gravel base; 150 mm thk 101 cu.m.
2.1.4 Soil Disposal
2.1.4.1 Remove surplus excavated material from site 85 cu.m.
2.1.5 Subgrade Preparation 486 sq.m.
2.1.6Anti-termite treatment to surfaces of ground and sides and bottoms of
excavations1,060 sq.m.
Total "DIV-02" - SITE CONSTRUCTION
DIV-03 CONCRETE WORKS
3.1 Cast-In-Place Structural Concrete
3.1.1 Reinforced concrete; 280 kg/cm2 or 4000 psi or 27.60 Mpa
3.1.1.1 Foundation, Wall Footing 56 cu.m.
3.1.1.2 Footing Tie Beam 18 cu.m.
3.1.1.3 Columns and Pedestal 26 cu.m.
3.1.1.4 Beams, Coping beams 20 cu.m.
3.1.1.5 Stiffeners columns, lintel and bond beam (Exterior Wall) 3 cu.m.
3.1.1.10 Counter top 1 cu.m.
3.1.2 Reinforced concrete; 3000 psi or 21 Mpa
3.1.2.1 Slab-on-grade /fill 79 cu.m.
3.2 Reinforcement in concrete
3.2.1Steel bar reinforcement including cutting and bending, links, stirrups,
binders, and tie wires, etc; grade 60
3.2.1.1 Foundation, Wall Footing 5,409 kg.
3.2.1.2 Footing Tie Beam 4,316 kg.
3.2.1.3 Columns and Pedestal 4,641 kg.
3.2.1.4 Beams, Coping beams 4,641 kg.
3.2.1.5 Stiffeners columns, lintel and bond beam (Exterior Wall) 168 kg.
3.2.2Steel bar reinforcement including cutting and bending, links, stirrups,
binders, and tie wires, etc; grade 40
3.2.2.1 Footing Tie Beam 1,279 kg.
3.2.2.2 Columns and Pedestal 2,559 kg.
3.2.2.3 Beams, Coping beams 1,960 kg.
3.2.2.6 Stiffeners columns, lintel and bond beam (Exterior Wall) 573 kg.
3.2.2.9 Counter top 101 kg.
3.2.2.11 Slab on Grade 5,032 kg.
3.3 Formwork
3.3.1 Foundation, Wall Footing 75 sq.m.
3.3.2 Footing Tie Beam 142 sq.m.
3.3.3 Columns and Pedestal 162 sq.m.
3.3.4 Beams, Coping beams 182 sq.m.
3.3.6 Stiffeners columns, lintel and bond beam (Exterior Wall) 53 sq.m.
3.3.9 Counter top 7 sq.m.
3.3.12 Slab on Grade /fill 10 sq.m.
3.4 Concrete Accessories
3.4.1 Expansion joint with sealant; pre-formed type
3.4.1.1 At Slab-on-grade 116 l.m.
Total "DIV-03" - CONCRETE WORKS
DIV-04 MASONRY WORKS
4.1 Accessories
4.1.1 Concrete Grout, 2000 psi 16 cu.m.
4.1.2Concrete lintel and bond beams inclusive of formworks and Steel
reinforcements, Grade 40 (For Interior Walls)2 cu.m.
4.1.3 CHB steel reinforcements, PNS 275 (Grade 40) 1,019 kg.
4.2 CHB
4.2.2 150mm thk (700 psi) - Interior Wall 186 sq.m.
4.2.3 100mm thk (350 psi / 2.5 N/mm2) 2 sq.m.
Total "DIV-04" - MASONRY WORKS
DIV-05 METAL WORKS
5.3
Roof Framing: Fabrication, delivery and erection of structural steel
including trusses, rafters, battens, purlins, sag rods, cross bracings with
turn buckles, bolts, plates, paint and all other incidentals to complete
21,990 kg.
Total "DIV-05" - METAL WORKS
DIV-07 THERMAL AND MOISTURE PROTECTION
7.1 Dampproofing and Waterproofing
7.1.1 Damproofing vapor barriers, 1 layer 6 mils thick @ Slab on Grade 486 sq.m.
7.3 Insulation
7.3.1 P.E. foam insulation for Roof 522 sq.m.
BOQ / Arrival & Departure Page 57 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
7.4 Roofing and Accessories
7.4.1Pre-painted horizontal roof sheet including bended materials, metal
capping and all incidentals to complete
7.4.1.1 To Main Roof 522 sq.m.
Total "DIV-07"-THERMAL AND MOISTURE PROTECTION
DIV-08 DOORS AND WINDOWS
8.1 WINDOWS & CURTAINWALL
8.1.212mm thk. Clear tempered frameless glass panels including all incidentals
to complete
8.1.2.20 W-3, 8400 x 3600mm 4 set
8.1.412mm thk. Clear tempered frameless glass partitions with door openings
including all incidentals to complete
8.1.4.19W-1, 6600 x 3000mm (8400 less 1800; double leaf swing door on
separate item)2 set
8.1.4.20W-2, 6600 x 3000mm (8400 less 1800; double leaf swing door on
separate item)2 set
8.1.4.21W-4, 6600 x 3000mm (8400 less 1800; double leaf swing door on
separate item) 1 set
Sub-total "8.1" - WINDOWS
8.2 DOORS AND PANELS
8.2.1 Glass Door
8.2.1.312mm thk tempered frameless swing glass door, double leaf including
stainless steel door locks, floor hinges and other incidentals to complete
8.2.1.3.2 D1 ; 1800 x 3000mm 5 set
8.2.2 Steel Door
8.2.2.3Single leaf swing flush metal door with bottom louver including door jamb
and all incidentals to complete, painted finish
8.2.2.3.2 D-2 & D-3 ; 850 x 2100mm 3 set
Sub-total "8.2" - DOORS AND PANELS
8.3 HARDWARES
8.3.1 Lockset
8.3.1.2 Cylindrical lever type lockset 3 set
8.3.3 Closer
8.3.3.1 Surface Mounted Door Closer 3 set
8.3.4 Hinges
8.3.4.2 Butt hinges 114mm x 114mm (4 1/2 x 4 1/2) 12 pair
8.3.5 Door Accessories
8.3.5.3 Push and Pull plate 1 set
Sub-total "8.3" - HARDWARES
Total "DIV-08" - DOORS AND WINDOWS
DIV-09 FINISHES
9.1 FLOOR FINISHES
9.1.13 300 x 300mm unglazed ceramic tiles, including mortar bed and other
incidentals to complete430 sq.m.
9.1.14 300 x 300mm unglazed ceramic tiles, including mortar bed and other
incidentals to complete at Toilet57 sq.m.
Sub-total "9.1" - FLOOR FINISHES
9.2 WALL FINISHES
9.2.1 Plain cement plaster wall Painted Finish 299 sq.m.
9.2.2200 x 200mm ceramic tiles, including mortar bed and other incidentals to
complete3 sq.m.
9.2.6 300 x 300mm Glazed ceramic wall tiles (including mortar bed) 151 sq.m.
9.2.89mm Gypsum board (on both sides) on metal framing system at
Telephone booth10 sq.m.
Sub-total "9.2" - WALL FINISHES
9.3 CEILING FINISHES
9.3.1 3.5mm Ficem board on metal frame 430 sq.m.
9.3.3 12mm thk. Moisture Resistant Gypsum Board on metal frame 57 sq.m.
9.3.5 Metal spandrel ceiling 144 sq.m.
Sub-total "9.3" - CEILING FINISHES
9.4 BASE BOARD FINISHES
9.4.1 100mm high painted base 37 l.m.
Sub-total "9.4" - BASE BOARD FINISHES
9.5 PAINTING WORKS
9.5.2 At Wall
9.5.2.1 Painting on concrete surfaces, textured paint finish (exterior) 118 sq.m.
9.5.2.2 Painting on concrete surfaces, smooth paint finish (interior) 180 sq.m.
9.5.2.4 Painting on gypsum board surfaces 20 sq.m.
9.5.3 At Ceiling
9.5.3.2 Painting on Fiber cement board surfaces 430 sq.m.
BOQ / Arrival & Departure Page 58 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
9.5.3.3 Painting on Gypsum board surfaces 57 sq.m.
9.5.4Painting on metal surfaces (metal doors, railings, gratings, grilles) - Epoxy
Paint17 sq.m.
Sub-total "9.5" - PAINTING WORKS
Total "DIV-09" - FINISHES
DIV-10 SPECIALTIES
10.1 Countertops
10.1.1 Granite Countertop W=600mm 6 sq.m.
10.26mm thick Facial mirror on 6mm thick marine plywood backing inclusive
all incidentals to complete
10.2.1 650 x 1000mm 1 set
10.2.5 1875 x 1000mm 2 set
10.3 Stainless Steel Grab bar at PWD Toilet 2 set
10.4
Toilet compartments/cubicles - comprising 12mm thk intermediate panels,
doors, and partitions/compartments (compact laminated phenolic board)
including all hardwares and accessories in nylon finish and all other
incidentals to complete
44 sq.m.
10.5 Phenolic Urinal Partition 400 x 1400mm 3 set
10.6 Plumbing Fixtures Accessories
10.6.2 Paper Holder, wall mounted 13 set
10.6.3 Deck Type Liquid Soap Dispenser 3 set
10.8Aluminum Composite Panel, inclusive of metal frame, sealant and all
incidentals to complete
10.8.1 Exterior and Interior Column 54 sq.m.
10.8.2 Roof Eaves 254 sq.m.
10.9 Roller Blinds 227 sq.m.
10.11 Signages including fixing material, frame and all incidentals to complete
10.11.20Item 20 - ( T1 ) Restrooms - Pendant mounted w/ pictogram of
international symbol of man, woman & handicapped accessibility1 set
10.11.29Item 29 - ( CS ) Concessionaire - Flush wall mounted & pendant
mounted with pictogram1 set
10.12Door signs (metal plate) including fixing material and all incidentals to
complete
10.12.1 Ladies 1 set
10.12.2 Gentlemen 1 set
10.12.3 PWD 1 set
Total "DIV-10" - SPECIALTIES
DIV-12 FURNISHING
12.1 Public Furniture
12.1.7 Lounge Seats ; 4 attached chairs 32 set
12.1.10 Lounge Center Table ; 300 x 600mm 32 set
12.1.11 Lounge Center Table, 400 x 400mm 2 set
12.1.21 Dining Table and chair for 4 persons 16 set
Total "DIV-10" - SPECIALTIES
BOQ / Arrival & Departure Page 59 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
DIV-15 MECHANICAL WORKS
15.1 PLUMBING WORKS
15.1.1 PLUMBING FIXTURES
1Water closet elongated including seat and cover with flush valve fitting
complete with standard accessories13 set
3Urinal wall-hung with flush valve fitting complete with standard
accessories4 set
5Under-the-counter-lavatory complete with single lever faucet, angle valve,
flexible hose, p-trap, drains and standard accessories4 set
Sub-Total
15.1.2 DOMESTIC WATER PIPING
15.1.2.1
Polypropylene Pipe (PPR PN 20), including couplings, hangers, brackets,
clamps, u-bolts, supports, sleeves, paintings and other consumable
materials to complete as specified in Mechanical Drawings and Technical
Specifications.
4 50 mm dia PPR Pipe 28 l.m.
5 40 mm dia PPR Pipe 5 l.m.
6 32 mm dia PPR Pipe 12 l.m.
7 25 mm dia PPR Pipe 76 l.m.
8 20 mm dia PPR Pipe 9 l.m.
9 15 mm dia PPR Pipe 6 l.m.
15.1.2.2
Polypropylene Pipe Fittings (PPR PN 20), including paintings,
miscellaneous supports, consumable materials and other accessories to
complete
15.1.2.2.1 Tee
10 50 mm dia, PPR Tee 3 ea.
12 50 x 32 mm dia, PPR Tee 4 ea.
16 40 x 32 mm dia, PPR Tee 4 ea.
17 40 x 25 mm dia, PPR Tee 2 ea.
19 40 x 15 mm dia, PPR Tee 1 ea.
20 32 mm dia, PPR Tee 18 ea.
21 32 x 25 mm dia, PPR Tee 3 ea.
23 32 x 15 mm dia, PPR Tee 2 ea.
29 15 mm dia, PPR Tee 7 ea.
15.1.2.2.2 Reducer
9 50 x 40 mm dia, PPR Reducer 1 ea.
10 50 x 32 mm dia, PPR Reducer 12 ea.
16 32 x 20 mm dia, PPR Reducer 17 ea.
17 32 x 15 mm dia, PPR Reducer 4 ea.
18 25 x 20 mm dia, PPR Reducer 17 ea.
19 20 x 15 mm dia, PPR Reducer 7 ea.
15.1.2.2.3 Adapter
1 Female adapter 15 mm dia. 7 ea.
4 Female adapter 38 mm dia. 13 ea.
15.1.2.2.4 End Cap
1 25mm dia. 17 ea.
2 20mm dia. 7 ea.
15.1.2.2.5 90 deg. Bend
3 65 mm x 90 deg. PPR Bend 1 ea.
4 50 mm x 90 deg. PPR Bend 3 ea.
5 40 mm x 90 deg. PPR Bend 2 ea.
6 32 mm x 90 deg. PPR Bend 7 ea.
7 25 mm x 90 deg. PPR Bend 16 ea.
9 15 mm x 90 deg. PPR Bend 1 ea.
BOQ / Arrival & Departure Page 60 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
15.1.2.2.6 Hosebibb
2 15 mm dia ( Irrigation) 2 ea.
15.1.2.2.7 Sleeve Type Coupling
5 50 mm dia, Union 3 ea.
6 40 mm dia, Union 1 ea.
15.1.2.2.8
Gates Valves and devices including grooves / flanges, gasket, bolts &
nuts, adaptors, tagging, sealant and all other necessary accessories to
complete the system
4 50 mm dia Gate Valve 3 ea.
5 40mm dia Gate Valve 1 ea.
15.1.2.2.9 Water Hammer Arrester
2 Type B 8 ea.
Sub – Total
15.1.3 SANITARY WASTE PIPING
15.1.3.1
Unplasticized Polyvinyl Chlorine (uPVC) Pipe conforming to ASTM D2729
Series 1000m including hangers and supports and other necessary
accessories to complete the system
2 100 mm dia Soil/Waste Pipe 22 I.m.
3 75 mm dia Soil/Waste Pipe 19 I.m.
4 50 mm dia Waste Pipe 18 I.m.
5 100 mm uPVC Wye 4 ea.
6 100 x 75 mm uPVC Wye 17 ea.
7 100 x 50 mm uPVC Wye 18 ea.
8 75 mm uPVC Wye 1 ea.
9 75 x 50 mm uPVC Wye 19 ea.
15.1.3.3 90 deg uPVC Bend
1 150 mm dia, 90 deg uPVC Bend 1 ea.
2 100 mm dia, 90 deg uPVC Bend 9 ea.
10.1 75 mm dia, 90 deg uPVC Bend 13 ea.
10.1 50 mm dia , 90 deg uPVC Bend 9 ea.
15.1.3.4 45 deg uPVC Bend
2 100mm dia, 45 deg uPVC Bend 7 ea.
3 75 mm dia, 45 deg uPVC Bend 1 ea.
4 50 mm dia, 45 deg uPVC Bend 10 ea.
15.1.3.6 P- Trap
3 P- Trap, 50 mm dia 8 ea.
15.1.3.7 Sanitary Tee
1 50 mm dia, uPVC Santee 9 ea.
15.1.3.8 Floor Clean Out
2 100 mm dia Floor Clean Out 6 ea.
8 Gully Trap (3-way inlet), 75 mm dia 4 ea.
Sub-Total
15.1.4 VENT PIPING
15.1.4.1
Unplasticized Polyvinyl Chlorine (uPVC) Pipe conforming toASTM D2729
Series 1000, including hangers and supports and other necessary
accessories to complete the system
1 150 mm dia uPVC Pipe Pipe 8 I.m.
2 100 mm dia uPVC Pipe 8 I.m.
3 75 mm dia uPVC Pipe 10 I.m.
4 65 mm dia uPVC Pipe 12 I.m.
5 50 mm dia uPVC Pipe 14 I.m.
BOQ / Arrival & Departure Page 61 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
15.1.4.2 PVC Tee
1 100 mm dia., uPVC Tee 2 ea.
3 100 x 50 mm dia, uPVC Tee 5 ea.
5 75 x 50 mm dia, uPVC Tee 3 ea.
6 65 x 50 mm dia, uPVC Tee 5 ea.
7 50 mm dia, uPVC Tee 6 ea.
15.1.4.3 90 deg uPVC Bend
2 75 mm dia., 90 deg uPVC Bend 2 ea.
3 65 mm dia., 90 deg uPVC Bend 4 ea.
4 50 mm dia, 90 deg uPVC Bend 13 ea.
15.1.4.4 Reducer
2 100 x 75 mm dia, uPVC Reducer 2 ea.
3 100 x 50 mm dia, uPVC Reducer 1 ea.
4 75 x 65 mm dia, uPVC Reducer 2 ea.
6 65 x 50 mm dia, uPVC Reducer 2 ea.
15.1.5.12 Vent Thru Roof
1 100 mm dia 1 ea.
Sub-Total
15.1.5 STORM DRAINAGE PIPING
15.1.5.1
Unplasticized Polyvinyl Chlorine (uPVC) Pipe conforming to ASTM D2729
Series 1000, including hangers and supports and other necessary
accessories to complete the system
2 150 mm dia. uPVC Pipe 18 I.m.
4 75 mm dia. uPVC Pipe 55 l.m.
15.1.5.2Unplasticized Polyvinyl Chlorine (uPVC) Pipe conforming to ASTM D2729
Series 1000, includes trenching, bedding, disposal, etc.
1 250 mm dia. uPVC Pipe 6 l.m.
2 200 mm dia. uPVC Pipe 18 l.m.
3 150 mm dia. uPVC Pipe 38 l.m.
15.1.5.4 uPVC Tee
3 150 mm dia uPVC Tee 4 ea.
15.1.5.5 90 deg. uPVC Bend
2 150 mm dia, 90 deg. uPVC Bend 8 ea.
3 75 mm dia, 90 deg uPVC Bend 38 ea.
15.1.5.6 Reducer
2 150 x 75 mm dia, uPVC Reducer 4 ea.
15.1.5.7 Roof Strainers
3 Roof Strainer, 75 mm dia. 14 ea.
15.1.5.8 Junction Box
3 Junction Box (675 x 675 x 1200 mm) 10 ea.
Sub-Total
TOTAL - PLUMBING WORKS
15.2 HEATING, VENTILATION & AIR CONDITIONING/ FIRE PROTECTION
15.2.1 Air Conditioning System
Equipment, see schedule for specifications (to include all other necessary
works to make the unit complete and operational.)Note: AHU/PAHU's are
with VFD motor and VFD Panel & LMCP (Bypass) for each Unit.
BOQ / Arrival & Departure Page 62 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
15.2.1.1
Multi-Split type Air-cooled Condensing Units; complete with C/W
refrigerant piping, drain pipe, insulation, pre-filter and remote controller
and all other necessary accessories, support/hangers/connections, base
as specified in the Mechanical Drawings and Technical Specifications.
1Variable Refrigerant Volume Type; Ceiling Mounted Cassette type 2-Way
Double Flow; cooling capacity 14.5 KW (5.0HP); 220V-1ph-60 Hz6 set
2VRV IV Outdoor Unit R-410A refrigerant 16 series, Cooling only model,
380V-3ph-60 Hz 1 set
3VRV IV Outdoor Unit R-410A refrigerant 14 series, Cooling only model,
380V-3ph-60 Hz 1 set
15.2.1.2Exhaust air duct with volume dampers, supports, etc. (w/o insulation),
Ga.26
1 500 x 300 mm 25 sq.m.
2 150 x 150 mm 14 sq.m.
15.2.1.3
Supply Ceiling Diffuser c/w OBD (Opposed Blade Damper), plenum
boxes & liner.
1 525 x 525 2 set
15.2.1.4 Return Ceiling Diffuser c/w OBD and plenum boxes
1 400 x 400 2 set
15.2.1.5 Exhaust Air Louver c/w insect screen (exposed -weatherproof)
1 500 x 300 2 set
15.2.1.6 Ventilation Exhaust Air Diffuser (EAD)c/w plenum boxes
1 225 x 225 8 set
15.2.1.7 Condensate Drain Line System
15.2.1.7.1 Condensate Drain Piping, PVC pipe, sch 40, class 150 including fittings
1 25 mm ø 119 l.m.
15.2.1.7.2 Condensate Drain pipe insulation, 19 mm thk flexible elastomeric
1 25 mm ø 119 l.m.
Sub - Total
15.2.2 Ventilation System
15.2.2.1 Fans and Blower Equipment
Equipment see schedule for specifications (to include all other necessary
works to make the unit complete and operational)
1 EF - Inline, 1188 CMH, 230v/1ph/60hz 2 set
Sub - Total
15.2.3 Fire Protection System
15.2.3.1 Fire Extinguisher
1
FE-1 : 4.5 kg. Siliconized mono ammonium phosphate dry chemical
wall mounted multi- purpose portable fire extinguisher complete with
hose and horn, wall bracket, UL listed and FM approved.
2 set
Sub - Total
15.2.4 Testing and Commisioning (ACV and FP) 1 lot
Sub - Total
TOTAL - HEATING, VENTILATION & AIR CONDITIONING/ FIRE
PROTECTION
BOQ / Arrival & Departure Page 63 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
DIV-16 ELECTRICAL WORKS
16.1 Lighting System
16.1.1 Roughing- ins (All necessary fittings, supports and other accessories are
1 32mmØ IMC 2 I.m.
2 25mmØ IMC 32 I.m.
4 20mmØ EMT 520 l.m.
5 15mmØ Flexible Metal Conduit 34 I.m.
16.1.2 Wires & Cables (Including connectors , tapes, etc)
2 22mm² THHN 10 I.m.
4 3.5mm² THHN 2,200 I.m.
5 8.0mm² TW 3 I.m.
7 3.5mm² TW 520 I.m.
16.1.3 Lighting Fixtures including necessary supports
4
Type "P", Recessed Mounted Lighting Fixture With Parabolic Semi
Specular Louver. 4 X 9w, T8 Led Tube, 230v, 60hz, Capital & Small
Letters Indicate Fixture Type & Controlling Switch, Respectively.
46 set
6Type "PO-7", Downlight, Aluminum Single Wall Construction, 172 Mmø,
With 1-9w Led's, Emitting Yellow Color Light, 240v, 60 Hz.1 set
13
Type "WW", Wall Washer Downlight, Maxi Tube, Wall Up/Down,
Dimensions: 175 Mm Ø X 269 Mm High, Body Components: Extruded
And Die-Cast Aluminum, Highly Corrosion Resistant To Any Extreme
Environment, Ip Protection: Ip 65 Class I, Protected From Ingress Of Dust
And Water, Used Both Outdoor And Indoor Environments, Luminaire: 6
Led 16.8 Watts 700 Ma 864 Lumens, 3000k, 7 Deg., 220-240v, 60 Hz.
20 set
16Type "X", Exit Light, 2 X 8w T8 Led Tube, Shaded Quadrant Indicates
Face And Direction Respectively.4 set
19Type "N" Led Tube Lighting Fixture, 2 X 32w, T8, 230v, 60hz, With Cut-
Off Parabolic Louver4 set
21-Same As Type"C"- Except Type "K", Wet Location Listed White Trim
With Fresnel Lens.10 set
23 Emergency Lighting Fixture, With 2 X 9w Par 36 Lamp, 230v, 60hz. 2 set
24
Type "FRE" Fluorescent Lighting Fixture Surface Mounted, 1x28w, T8,
230v, 60hz W/ Electronic Gear For T8 Linear Fluorescent Tube, Housing:
Extruded Aluminum W/ Protection Glass, Form Of Protection: Ip 20 Class
1, Energy Consumption: 30w, Dimensions: 1173mm X 34mm X 53.50mm,
Mounted Atop Lavatory
2 set
16.1.4 Box & Wiring Devices
1 Junction Box 90 ea.
2 Utility Box 12 ea.
12 Light switch, 15A, 230V, 1P, GROUNDING TYPE, SINGLE-GANG. 1 set
13 DITTO, EXCEPT TWO GANG 3 set
14 DITTO, EXCEPT THREE GANG 2 set
16 DITTO, EXCEPT THREE-WAY, TWO GANG 4 set
19 Testing and Commissioning 1 lot
Sub - Total
16.2 Power System
16.2.1Roughing- ins (All necessary fittings, supports and other accessories are
already included from straight pipes)
1 90mmø IMC 1 l.m.
3 65mmø IMC 36 l.m.
6 32mmø IMC 1 l.m.
8 20mmø IMC 155 l.m.
12 100mmø PVC 306 I.m.
16.2.2 Wires & Cable (including Connectors, Tapes, Etc.)
2 200mm² THHN 10 I.m.
4 100mm² THHN 1,320 I.m.
5 80mm² THHN 48 I.m.
12 3.5mm² THHN 160 I.m.
16 50mm² TW(G) 3 I.m.
17 30mm² TW(G) 5 I.m.
18 22mm² TW(G) 330 I.m.
22 3.5mm² TW(G) 12 I.m.
BOQ / Arrival & Departure Page 64 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
16.2.3 Boxes & Wiring Devices
1 Octagonal Box ea.
2 Utility Box 10 ea.
3 Duplex convenience outlet, 20A, 2P, 3W, 230V, Grounding type 6 set
16.2.4 Board & Equipment
DPAL: 400v, 3p, 3W+N+G, 60hz Nema 1 Enclosure, Surface Mounted1 assembly
Main: 400AT/400AF/3P
Branches: 1-200AT/225AF/3P
1-80AT/100AF/3P
6-20AT/100AF/1P
LPAL: 400V, 3Ø, 3+N+G, 60Hz, Nema 1 Enclosure, Surface Mounted 1 assembly
Main: 80AT/100AF/3P
Branches: 12-20AT/100AF/1P
PPAL: 400V, 3Ø, 3W+N+G, 60Hz, Nema 1 1 assembly
Main: 300AT/400AF/3P
Branches: 1-250AT/400AF/3P
1-50AT/100AF/3P
6-20AT/100AF/1P
ECB, 300AT/400AF/3P, 380V, 60Hz In Nema 3r Enclosure 1 assembly
41 Testing and Commissioning 1 lot
Sub - total
16.3 Gounding System (Auxiliary System Included)
16.3.2 Wires & Cables (including connectors, etc.)
1 100mm² Medium Drawn Bare Copper Wire 160 I.m.
16.3.3 Grounding
2 Ground Test Well 4 set
4 Exothermic Welded Joint
Type "GT" Cable to Ground Rod 14 set
Type "TA" Cable to Cable 6 set
Type "RJ" Cable to Rebar 4 set
16.3.4 Testing and Commissioning 1 lot
Sub - Total
16.4 Fire Alarm System
16.4.1Roughing-Ins (All necessary fittings, supports and other accessories are
already included from straight pipes)
1 20mmø IMC pipes 55 I.m.
15mmø IMC pipes 8 I.m.
25mmø PVC 65 I.m.
16.4.2 Boxes
1 Octagonal Box, 50 mm x 100 mm x 54 mm 8 ea.
2 Utility box, 50 mm x 100 mm x 54 mm 2 ea.
3 Pullbox (200mm x 325mm x 175mm) 1 ea.
16.4.3 Wires & Cables (including connectors etc.)
1 2.0mm² TW wire 130 I.m.
2 1.25mm² Shielded Twisted Pair, Fire Rated Cable 130 I.m.
16.4.4 FA Equipment & Devices
1 Fire Alarm Horn with Strobe Light 1 set
2 Manual Pull Station, Break Glass Type 1 set
3 Smoke Detector 1 set
16.4.5 Testing and Commissioning 1 lot
Sub - Total
16.7 CATV System
16.7.1Roughing-ins(All necessary fittings, supports and other accessories are
already included from straight pipes)
1 25 mm ø PVC 65 Im
20mmø IMC 50 Im
16.7.2 Wires & Cables (including, connectors, etc)
BOQ / Arrival & Departure Page 65 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
1 CAT 6E UTP Cable, 4 pairs 130 Im
16.7.3 Boxes and CATV Devices
1 Utility Box 4 ea.
Pull Box (200x150x100) 1 ea.
Junction Box 2 set
16.7.4 Testing and Commissioning 1 lot
Sub- Total
16.8 CCTV System
16.8.1Roughing-ins(All necessary fittings, supports and other accessories are
already included from straight pipes)
1 20mmø IMC 50 Im
25mmø PVC 65 Im
16.8.2 Wires & Cables (including, connectors, etc)
1 CAT 6E UTP Cable 4 Pairs 130 Im
16.8.3 Boxes
1 Junction Box 2 ea.
Pull Box (200x150x125) 1 ea.
16.8.4 CCTV Devices
1 Fixed CCTV Camera Dome Type 2 ea.
16.8.5 Testing and Commissioning 1 lot
Sub- Total
16.9 Flight Information Display System
16.9.1Roughing-ins(All necessary fittings, supports and other accessories are
already included from straight pipes)
1 20 mmø IMC 50 Im
3 25 mmø PVC 60 Im
16.9.2 Boxes
1 Junction Box 2 set
Pull Box (200x150x125) 1 ea.
16.9.3 Wires & Cables (including connectors, etc.)
1 CAT 6E UTP Cable, 4 Pairs 128 Im
16.9.4 Flight Information Display System Devices
1FID LCD 32" (including monitor, display system, ups, transmitter,receiver,
mounting support & other accs needed)2 set
16.9.5 Testing and Commissioning 1 lot
Sub - Total
TOTAL - ELECTRICAL WORKS
BOQ / Arrival & Departure Page 66 of 70
DEPARTMENT OF TRANSPORTATION AND COMMUNICATION
S U M M A R Y
3.1 COVERED DRIVEWAY
DIV-02 SITE CONSTRUCTION 1 l.s.
DIV-03 CONCRETE WORKS 1 l.s.
DIV-06 WOOD AND PLASTIC 1 l.s.
DIV-07 THERMAL AND MOISTURE PROTECTION 1 l.s.
DIV-09 FINISHES 1 l.s.
DIV-10 SPECIALTIES 1 l.s.
DIV-15 MECHANICAL WORKS
15.1 Plumbing Works 1 l.s.
DIV-16 ELECTRICAL WORKS 1 l.s.
TOTAL COST -COVERED DRIVEWAY
TOTAL
CONSTRUCTION COST
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
BOQ / Covered Driveway Page 67 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
3.1 COVERED DRIVEWAY
DIV-02 SITE CONSTRUCTION
2.0 SITE WORKS
2.1.1 Building Layout 2,499 sq.m.
2.1.2 Structure Excavation 197 cu.m.
2.1.3.1 Backfill excavations with suitable excavated materials 126 cu.m.
2.1.3.2 Gravel base; 150 mm thk 21 cu.m.
2.1.4 Soil Disposal
2.1.4.1 Remove surplus excavated material from site 71 cu.m.
2.1.6Anti-termite treatment to surfaces of ground and sides and bottoms of
excavations589 sq.m.
Total "DIV-02" - SITE CONSTRUCTION
DIV-03 CONCRETE WORKS
3.1 Cast-In-Place Structural Concrete
3.1.1 Reinforced concrete; 280 kg/cm2 or 4000 psi or 27.60 Mpa
3.1.1.1 Foundation, Wall Footing 25 cu.m.
3.1.1.2 Footing Tie Beam 36 cu.m.
3.1.1.3 Columns and Pedestal 16 cu.m.
3.2 Reinforcement in concrete
3.2.1Steel bar reinforcement including cutting and bending, links, stirrups,
binders, and tie wires, etc; grade 60
3.2.1.1 Foundation, Wall Footing 1,593 kg.
3.2.1.2 Footing Tie Beam 4,040 kg.
3.2.1.3 Columns and Pedestal 1,627 kg.
3.2.2Steel bar reinforcement including cutting and bending, links, stirrups,
binders, and tie wires, etc; grade 40
3.2.2.2 Footing Tie Beam 1,843 kg.
3.2.2.3 Columns and Pedestal 1,483 kg.
3.3 Formwork
3.3.1 Foundation, Wall Footing 51 sq.m.
3.3.2 Footing Tie Beam 234 sq.m.
3.3.3 Columns and Pedestal 90 sq.m.
Total "DIV-03" - CONCRETE WORKS
DIV-05 METAL WORKS
5.4
Column and Roof Frame: Fabrication, delivery and erection of structural
steel column and roof framing, including girders, beams, plates, bolts,
stiffeners, paint and other incidentals to complete
208,755 kg.
Total "DIV-06" - WOOD AND PLASTIC
DIV-07 THERMAL AND MOISTURE PROTECTION
7.4 Roofing and Accessories
7.4.26mm thk. Polycarbonate skylight inclusive of all bended materials and
incidentals to complete
7.4.2.1 To Main Roof 3,294 sq.m.
Total "DIV-07"-THERMAL AND MOISTURE PROTECTION
DIV-09 FINISHES
9.2 WALL FINISHES
9.2.3 Natural Stone cladding (Ledge stone) 23 sq.m.
Sub-total "9.1" - WALL FINISHES
Total "DIV-09" - FINISHES
DIV-10 SPECIALTIES
10.8Aluminum Composite Panel, inclusive of metal frame, sealant and all
incidentals to complete
10.8.1 Exterior and Interior Column 369 sq.m.
Total "DIV-10" - SPECIALTIES
DIV-15 MECHANICAL WORKS
15.5 STORM DRAINAGE PIPING
15.5.1
Unplasticized Polyvinyl Chlorine (uPVC) Pipe conforming to ASTM D2729
Series 1000, including hangers and supports and other necessary
accessories to complete the system
2 150 mm dia. uPVC Pipe 105 I.m.
15.5.2Unplasticized Polyvinyl Chlorine (uPVC) Pipe conforming to ASTM D2729
Series 1000, includes trenching, bedding, disposal, etc.
3 150 mm dia. uPVC Pipe 98 l.m.
15.5.4 uPVC Tee
3 150 mm dia uPVC Tee 13 ea.
15.5.5 90 deg. Bend
BOQ / Covered Driveway Page 68 of 70
TOTAL
CONSTRUCTION COST
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
2 150 mm dia, 90 deg. uPVC Bend 61 ea.
15.5.6 Reducer
15.5.7 Roof Strainers
1 Roof Strainer, 150 mm dia. 34 ea.
15.5.8 Junction Box
3 Junction Box (675 x 675 x 1200 mm) 20 ea.
Sub-Total
TOTAL
DIV-16 ELECTRICAL WORKS
16.1 Lighting System
16.1.1Roughing- ins (All necessary fittings, supports and other accessories are
already included from straight pipes)
4 20mmØ EMT 704 l.m.
5 15mmØ Flexible Metal Conduit 18 I.m.
16.1.2 Wires & Cables (Including connectors , tapes, etc)
4 3.5mm² THHN 2,760 I.m.
7 3.5mm² TW(G) 704 I.m.
16.1.3 Lighting Fixtures including necessary supports
25
Type "N2a", Surface Mounted Led Tube Fixture, Vapor/Dustproof, 2 X
22w, T8, 230v, 60 Hz.; Housing: Sturdy 18 Ga. Steel White Powdered
Coated; Lens: 3/16" Tempered Glass With Acrylic And Polycarbonate
Lens; Front Access Fixture; Hinged Front Door Frame; Hinged Ballast
Tray; Spring-Loaded Lampholders, Complete With Electronic Driver To
Support T8 Led Lamps.
36 set
16.1.4 Box & Wiring Devices
1 Junction Box 36 ea.
19 Testing and Commissioning 1 lot
TOTAL ELECTRICAL WORKS
BOQ / Covered Driveway Page 69 of 70
DEPARTMENT OF TRANSPORTATION AND COMMUNICATION
SPECIAL EQUIPMENT
Supply and Instllation of Baggage handling System
1.0 Departure Area
1.1
Weighing Conveyor, 600 mm belt width x 1.20 meters length, brand new,
complete with gear motor drive, electronic weigh scales, load cells,
operator and passenger panels and electrical controls, including
installation and commissioning
18 set
Note:
2 units will be designated for oversized baggage, hence dimension of
conveyor shall be 1000 mm belt width x 2"00 meters length
1.2
Discharge Conveyors, 600 mm belt width x 1.20 meters length, brand
new, complete with gear motor drive and controls, including installation
and commissioning
18 set
1.3
Collecting Conveyor, 1000 mm belt width x 39.00 meters length with gear
motor drive and controls, including stainless steel 304 guarding on one
side of the conveyor complete with 4.0 kW drive motor and controls
1 set
1.4Curve Belt Conveyor, 1000mm belt width x 90 degree curve, complete
with 0.75 kW drive motor and controls2 set
1.5
Take-Away Conveyor, 1000 mm belt width x 33.00 meters length with
gear motor drive and controls, including stainless steel 304 guarding on
one side of the conveyor complete with 3.0 kW drive motor and controls
1 set
1.6
Gravity Roller Conveyor, 1,000 mm roller width, 6.00 meter length, 340
mm height, 75 mm pitch, stainless steel roller material. mild steel painted
frame
1 set
2.0 Arrival Area
2.1
Claim Carousel, "L" - Shape, Flat Type, 1,000 mm slat width x 58.25
meters equivalent straight length (ESL), brand new, overlapping slat type,
complete with 2 sets 2.2 kW friction drive and VFD controller and control
panel.
2 set
lncluding:
1 .) Center ln-fill of carousel, with plywood decking and structural supports
and covered with fine carpeting including stainless steel cladding on up-
stand paneling.
2.) 4 sets Roll-up Doors
3.) 4 sets Rubber Curtain
2.2 Delivery, lnstallation and Commissioning Cost 1 lot
3.0 Elevator, cap 800kg (For Passenger Terminal Building) 4 set
4.0 Escalator (For Passenger Terminal Building) 3 set
TOTAL COST - SPECIAL EQUIPMENT
BILL OF QUANTITIES
BICOL INTERNATIONAL AIRPORT DEVELOPMENT PROJECT
Daraga, Albay
PAY ITEM
NO.D E S C R I P T I O N
ESTIMATED
QTYUNIT UNIT COST
TOTAL
CONSTRUCTION COST
BOQ / Special Equipment Page 70 of 70