boat pontoon with plastic floats - lieptas pontoons with plastic floats.pdftule 21, saue 76505...
TRANSCRIPT
-
Boat Pontoon with Plastic Floats
-
www.topmarine.eu www.topmarine.eu
W
L
W
L
Boat Pontoon with Plastic Floats
END CONNECTION SIDE CONNECTIONT-CONNECTION L-CONNECTION
W
L
W
L
CHAIN MOORING SYSTEM- Mooring with hot dip galvanized chain.
FLEXIBLE RUBBER JOINT CONNECTION
- Strong and reliable rubber-bolt joint connection;
- Connects boat pontoons into one single unit.
TIMBER DECKING - Planed anti-slip blanks 28x120 mm;- Strength C16 according to EN 338 standard;- Impregnated (vacuum pressure method), class: HC4.
GANGWAY- Timber gangway;- Possibility of railings.
ABUTMENT- Concrete abutment;- Abutment on screw piles.
PILE MOORING SYSTEM- An alternative solution for chain mooring;- Has been designed for piles Ø110-200 mm;- The design pile load is 10 kN;- Large and robust construction;- Flexible rubber joints.
FENDER- Protects mooring fingers or timber pontoons against
impacts (colour: white).
MOORING RING- Mooring ring (hot dip galvanized).
BOAT BOOMS- Boat Booms with rubber or hinge connection;- With or without timber decking.
TIMBER FRAME- Planed timber beam
70x195mm; - Strength C24
according to EN 338 standard;
- Impregnated (vacuum pressure method); class: HC4;
- All bolts and fittings are fully hot dip galvanized.
PLASTIC FLOAT 450 LTR- Roto moulded from Polyethylene (PE)- Filled with expanded polystyrene: density
19kg/m³, strength ≥100 kPa, water absorption ≤3%.
- Protected against UV-radiation and freezing;
- Designed for year round use;- Progressive floatage construction.
-
Tule 21, Saue 76505 [email protected]
Top MarinePh +372 5304 4000Fax +372 656 0520
Representative:
Boat Pontoon Module construction. Easy to transport and install. High bearing capacity.
Intended use For inland waterway boat harbours.
Connection options End connection, side connection, L-connection, T-connection.
Structural design450 l plastic floats filled with EPS foam. Resistant to UV-radiation and freezing.
Strong, silent and reliable rubber-bolt joints.
Mooring system Mooring by chain or piles.
AccessoriesMooring rings, boat booms, fenders, swim ladders,
safety equipement, railings
Technical Data of the Boat Pontoon with Plastic Floats
Item code 02 10 00 02 20 00 02 30 00 02 40 00
Dimensions (m)
W 2.4 2.4 2.4 2.4
L 6.0 6.0 6.0 6.0
H 0.82 0.82 0.82 0.82
Number of floats (pc) 4 x 450 l 6 x 450 l 8 x 450 l 10 x 450 l
Freeboard (m) 0.65 0.69 0.72 0.73
Designed load capacities (kN/m²) 0.9 1.5 2.1 2.7
Weight of the pontoon (kg) 406 452 498 544
Dimensions of floats Wx Lx H (m) 0.8 x 1.2 x 0,6
Allowed max wave height 0.2 m
Allowed perpendicular velocity 1 m/sec
Allowev icing/ freezing No ice movement allowed
Mooring system
Chain Ø 13 mm
Concrete anchor
500 kg
Pile Ø 110...200 mm, 10 kN
Boat mooring Mooring buoys, Boat booms, Mooring rings
Max boat dimensions Boat max length 9.1 m (30 feet)
Boat Pontoon with Plastic Floats
Revision date 1 January 2016
Top Marine is a continuously developing firm and may at its sole discretion revise or amend this product catalogue without further notice.
Baltic Marina ExportLukiškių g. 5 - 331, LT-01108 Vilnius, LietuvaTel.: +370 652 62284, +370 652 [email protected] www.lieptas.lt