border security using wireless integrated network sensor ppt2
TRANSCRIPT
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
1/22
ByB Niranjan reddy (07R75A0406)D Sushma (06R71A0427)J K Anusha (06R71A0435)K Srikanth (06R71A0443)
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
2/22
INTRODUCTION RECENT DEVELOPMENT
WINS System Architecture WINS Node Architecture WINS Micro sensor WINS Digital Signal Processing WINS characteristics & application Design consideration Conclusion
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
3/22
Wireless Integrated Network Sensors (WINS) now providea new monitoring and control capability for monitoringthe borders of the country.
Using this concept we can easily identify a stranger orsome terrorists entering the border.
The border area is divided into number of nodes. Eachnode is in contact with each other and with the main node.
The noise produced by the foot-steps of the stranger arecollected using the sensor. This sensed signal is thenconverted into power spectral density and the comparedwith reference value of our convenience.
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
4/22
WIRE LESS INTEGRATED NETWORK SENSOR(WINS)
WINS provide a new monitoring and control capability formonitoring the Border of the country.
WINS require a microwatt of power so it is very cheaper thanother security system such as Radar and produce lessamount of delay.
It produce a less amount delay to detect the target.
It is reasonably faster.
On global scale wins will permit monitoring of land ,waterand air resources for environment monitoring.
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
5/22
WINS Initiated in 1993 under Defence advance research
project agency(DARPA)in US.
LWIM (Low power wireless integratedmicrosensor)program began in 1995 for furtherdevelopment os WINS sponsored by DARPA.
In 1998, WINS NG introduced for wide varity ofapplication.
the LWIM projectmultihop, self-assembled, wirelessnetwork algorithms for operating at micropower levels.
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
6/22
Internet
sensing
signal processing / event recognition
wireless communication
low powernetworking
local areaworldwide user
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
7/22
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
8/22
WINS architecture includes sensor, data converter,signal processing, and control functions.
The micro power components operate continuouslyfor event recognition, while the network interface
operates at low duty cycle.
Continuous operation low duty cycle
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
9/22
1998: WINS NG developed by the authors contiguous sensing, signalprocessing for event detection, local control of actuators, eventclassification, communication at low power
Event detection is contiguousmicropower levels
Event detected => alert process to identify the event Further processing? Alert remote user / neighboring node?
Communication between WINS nodes
sensor
actuator
signal processing
for event detection
control
Processing
event classification& identification
wireless
internetinterface
continuously vigilant operation low-duty cycle operation
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
10/22
WINS nodes are distributed at high density in anenvironment to be monitored.
WINS node data is transferred over the
asymmetric wireless link to an end user
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
11/22
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
12/22
The detector shown is the thermal detector. It just capturesthe harmonic signals produced by the footsteps of thestranger entering the border.
These signals are then converted into their PSD values andare then compared with the reference values set by the user.
Thermal Infrared Detector
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
13/22
Remotely monitored battlefield sensorsystem(REMBASS)
Use now a day in unattended groundsensor(UGS) These sensor used seismic-acoustic energy,
infrared energy and magnetic field to detectenemy activity.
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
14/22
Fig. . Sensor hardware from left to right: (a) Mica2 network node,(b) Mica Sensor Board, (c) Mica Power
Board, (d) TWR-ISM-002 Radar Board, and (e) All of the boards
attached together.
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
15/22
If a stranger enters the border, his foot-steps willgenerate harmonic signals. It can be detected as acharacteristic feature in a signal power spectrum. Thus,
a spectrum analyzer must be implemented in the WINS. The spectrum analyzer resolves the WINS input data
into a low-resolution power spectrum.
WINS micro ower s ectrum anal zer architecture
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
16/22
Characteristics: Support large numbers of sensor.
Dense sensor distributions . These sensor are also developed to support short
distance RF communication Internet access to sensors, controls and processor
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
17/22
On a global scale, WINS will permitmonitoring of land, water, and air resources
for environmental monitoring . On a national scale, transportation systems,
and borders will be monitored for efficiency,safety, and security.
On a local, enterprise scale, WINS will createa manufacturing information service for costand quality control.
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
18/22
Reliability Energy :There are four way in which node consume
energy1. Sensing2. Computation3. Storing4. Communicating
Sensing: Choosing right sensor for the job canimprove the system performance.
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
19/22
The sensor must be design to minimize the liklihood ofenvironment effect of wind, rain,snow etc.
The enclosure is manufacture from clear acrylic material.
Enclosure
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
20/22
We experienced several failure as a result ofundetectable, incorrectly download program
and depeleted energy level etc.
For example node will detect false eventwhen sensor board is overheated.
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
21/22
Densely distributed sensor networks. Application specific networking architectures Development platforms are now available .
The network is self-monitoring and secure.
. Now it is possible to secure the border with an invisible
wall of thousands or even millions of tiny interconnected
sensors.
-
8/3/2019 Border Security Using Wireless Integrated Network Sensor Ppt2
22/22