boutique fitness studio construction set

DN

NOTE: LANDLORD'S ARCHITECT AND CONTRACTOR SHALL FILE, CO-ORDINATE AND COMPLETE STORE FRONT

REMOVAL AND REPLACEMENT. TIMING AND SEQUENCING SHALL BE CO-ORDINATED W/ CLIENT'S ARCHITECT AND

CONTRACTOR

REMOVE

EXISTING

NON-LOAD

BEARING

PARTITION

REMOVE ALL EXISTING

FLOORING, BASEBOARD,

TILE & LIGHT FIXTURES

REMOVE EXISTING

LAY IN CEILING

THROUGH OUT

REMOVE

EXISTING

NON-LOAD

BEARING

PARTITION

REMOVE

EXISTING

NON-LOAD

BEARING

PARTITION

ENTRY

001

REMOVE

EXISTING

DOOR AND

JAMB

REMOVE

EXISTING

BENCH

REMOVE

EXISTING

DOOR AND

JAMB

REMOVE

EXISTING

BENCH

ENTRY

002

REMOVE

EXISTING

BENCH

REMOVE EXISTING

NON-LOAD BEARING

PARTITION

REMOVE EXISTING

STEP EDGING

REMOVE EXISTING

NON LOAD BEARING

PARTITION WALL

REMOVE EXISTING

NON-FULL HEIGHT

PARTITION WALL

REMOVE ALL EXISTING


TILE & LIGHT FIXTURES

DISCONNECT AND

REMOVE EXISTING

ELECTRIC PANEL AND

ASSOCIATED WIRING.

REMOVE EXISTING NON

LOAD BEARING

PARTITIONS.

REMOVE ALL EXISTING


TILE & LIGHT FIXTURES.

REMOVE

EXISTING

DOOR AND JAMB

CAP AND

REMOVE

FIXTURES

CAP AND

REMOVE

FIXTURES

REMOVE

EXISTING

DOOR AND

JAMB

EL/P

EL/P

EL/P

CAP AND

REMOVE

RADIATOR.

REFER TO

ENGINEERS

DRAWINGS

FOR MORE

INFORMATION.

REMOVE

EXISTING

DOOR AND

JAMB

EXISTING STEP

TO REMAIN

EXISTING METERS

TO REMAIN; SHOWN

HATCHED

EL/P

DISCONNECT AND

REMOVE EXISTING

ELECTRIC PANEL AND

ASSOCIATED WIRING.

DISCONNECT AND

REMOVE EXISTING

ELECTRIC PANEL AND

ASSOCIATED WIRING.

UP

WASHER DRYER

CAP AND REMOVE EXISTING

WASHER AND DRYER

AND ASSOCIATED

PLUMBING AND VENT LINES.

REFER TO ENGINEERS

DRAWINGS FOR MORE

INFORMATION

NOTE: ALL RECEPTACLES SHALL BE VERTICALLY MOUNTED AT 12" UNLESS OTHERWISE NOTED. ALL SWITCHESSHALL BE AT 42" AFF UNLESS OTHERWISE NOTED. COORDINATE WITH MANUFACTURER'S RECOMMENDATIONSFOR ALL APPLIANCE POWER LOCATIONS.

6'-4"

EQ

EQ

EQ

EQ

EQ

5'-2"

1. REMOVE ALL EXISTING WOOD BASE MOLDING.

2. REMOVE ALL EXISTING PLUMBING FIXTURES

AT EXISTING BATHROOMS; CAP OFF AS

REQUIRED.

3. REMOVE ALL EXISTING LIGHT FIXTURES

THROUGHOUT.

4. REMOVE/ REPLACE ALL EXISTING ELECTRICAL

WIRING, OUTLETS, SWITCHES, ETC.

THROUGHOUT.

5. REMOVE ALL EXISTING DOORS AND JAMBS

UNLESS OTHERWISE NOTED.

6. RETAIN ALL EXISTING RADIATORS UNLESS

OTHERWISE NOTED.

7. REMOVE ALL EXISTING WALL & FLOOR TILES

THROUGHOUT.

8. REMOVE EXISTING LAY-IN CEILING TILES

THROUGHOUT.

9. REMOVE ANY EQUIPMENT OF FIXTURES LET

BY PREVIOUS TENANT

DEMOLITION NOTES:

EXISTING PARTITION WALL,

PLUMBING FIXTURE, MILLWORK

OR APPLIANCE TO BE REMOVED

EXISTING WALL/ COLUMN TO REMAIN

LEGEND

EXISTING DOOR TO BE REMOVED

NO STRUCTURAL ELEMENTS SHALL BE REMOVED IN THIS

ALTERATION. THERE SHALL BE NO CUTTING, CHANNELING,

REMOVAL OR MODIFICATION OF STRUCTURAL ELEMENTS OF

THE BUILDING UNLESS CLEARLY NOTED, APPROVED BY THE

BOARD, AND PROPERLY SHORED, REINFORCED OR REPLACED.

CONTRACTOR SHALL PERFORM ALL OPERATIONS OF

DEMOLITION AND REMOVAL INDICATED ON THE DRAWINGS AND

AS MAY BE REQUIRED BY THE WORK. ALL WORK SHALL BE

DONE CAREFULLY AND NEATLY, IN A SYSTEMATIC MANNER.

ALL EXISTING SURFACES AND EQUIPMENT TO REMAIN SHALL BE

FULLY PROTECTED FROM DAMAGE. THE CONTRACTOR SHALL

ASSUME FULL RESPONSIBILITY FOR DAMAGE AND SHALL MAKE

REPAIRS REQUIRED WITHOUT ADDITIONAL COST TO THE

OWNER.

NO DEBRIS SHALL BE ALLOWED TO ACCUMULATE ON THE SITE.

DEBRIS SHALL BE REMOVED BY THE CONTRACTOR AS THE JOB

PROCEEDS. THE SITE SHALL BE LEFT BROOM CLEAN AT THE

COMPLETION OF DEMOLITION.

CONTRACTOR SHALL PROTECT ALL HALLWAYS AND PUBLIC

AREAS AT ALL TIMES. ALL ADJOINING PROPERTY AFFECTED BY

ANY OPERATIONS OF DEMOLITION SHALL BE PROTECTED PER

THE REQUIREMENTS OF THE LOCAL BUILDING CODE.

CONTRACTOR SHALL REMOVE OR RELOCATE ALL WIRING AND

PLUMBING EQUIPMENT AFFECTED BY REMOVAL OF PARTITIONS.

REMOVED PIPES/ AND OR LINES SHALL BE CUT TO A POINT OF

CONCEALMENT BEHIND OR BELOW FINISH SURFACES, AND

SHALL BE PROPERLY CAPPED OR PLUGGED. ALL WORK SHALL

MEET APPLICABLE CODES.

CONTRACTOR SHALL PROVIDE, ERECT AND MAINTAIN ALL

TEMPORARY BARRIERS AND GUARDS, AND ALL TEMPORARY

SHORING AND BRACING AS REQUIRED BY THE DEPARTMENT OF

BUILDING RULES AND REGULATIONS.

CONTRACTOR SHALL REMOVE ALL ABANDONED MATERIALS,

DEVICES, FIXTURES, PIPES, CONDUITS, WIRES, ETC. FROM

PREMISES.

CONTRACTOR SHALL COMPLY WITH BUILDING REGARDING USE

OF POWER TOOLS AT DEMISING WALLS AND AT SERVICES AND

RISERS.

GENERAL NOTES - DEMOLITION PLAN:

Predesign ServicePHASE:

Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:

ALL RIGHTS RESERVED.

C

1164 - 1166 Lexington Avenue

Schematic DesignDesign DevelopmentBid DocumentConstruction DocumentSupplemental InformationD.O.B.

NEW YORK, NY 10028

a r c h i t e c t u r e

i n t e r i o r s

dhd

Seal & Signature:

BID SET

01 INITIAL PRICING SET 07.23.2012

02 09.06.2012BID SET

03 09.10.2012REVISED ELECTRICAL PLAN

A-101.00

DEMOLITIONPLAN

09.06.12 AS NOTED

SHEET 4 OF 13

01

CELLAR DEMO PLAN

SCALE: 1/2"=1'-0"

02

LEVEL ONE DEMO PLAN

SCALE: 1/2"=1'-0"

DN

102STUDIO

104STORAGE

104ADA BATHROOM

101RECEPTION

13'-11

1

2

"

36'-10"

9'-1"

3'-5

1 2

"

3'-9

1

2

"

3'-10"

2'-8"

5'-7"

7.01

7.20

7.05

7.05

3'-7"

7.06

7.07

7.08

7.09

7.03

7.10

7.11

7.11

7.02

D-101

D-102

D-104

D-105

B

B

C

B

D

E

F

2'-9

1

2

"

6'-6

1 2

"

5'-2

1

2

"

1'-4

1

2

"

1'-6" 1'-6" 1'-5

1

2

"9"

7.02

7.14

103BATHROOM

7.12

7.12

7'-3"

5'-7"

3'-0"

21'-0

1 2

"

3'-9"

12'-9

1 2

"3'-3" V

.I.F

12'-10"

10

1

2

"

6"

7.16

7.18

7.15

7.17

7.19

7.12

NEIGHBOURINGTENANT

A-302

02

03

01

A-301

05

03

01

A-301

06

07

04

08

A-301

02

A-301

03

02

01

A-301

02

03

01

04

13'-1

1

2

" V.I.F

7.04

7.04

3'-7" V.I.F

3'-0"

2'-8"

1'-7"

7'-3"

5'-3

1

2

"

7.22

9'-8"

7.23

7.23

1'-11"

2'-1"

3'-11

1 2

"

E

EXISTING REAR DOOR TOADJACENT TENANT SPACE

7.24

7.01

7.03

E/P

D-103

2'-0"

NEW ELECTRICALPANEL LOCATION.CENTER ON EXPOSEDPORTION OF COLUMN

UP

001CELLAR

003CORRIDOR

D-C01

D-C02

11'-9"

11'-7"

2'-9" V.I.F

5'-2

1

2

"

4'-0"

2'-10

1

2

" V.I.F

WA

STEP

IPE

+6' 7

1 2"

BEA

M +

7' 2

"

REFR

IGER

AN

T LI

NES

+ 8

' 4"

PIPE

+6'

11"

BEAM + 7' 2"

DUCT+ 6' 0"

WASTEPIPE +6' 712"

PIPE

+7'

4"

PIPE

+6'

10"


6'-4"

EQ

EQ

EQ

EQ

EQ

5'-2"

1. REFER TO MEP ENGINEER'S DRAWINGS FOR INFORMATION

REGARDING HVAC, PLUMBING DESIGN AND ROUTING, GAS, ELECTRICAL

AND VENTILATION.

2. CONTRACTOR SHALL FURNISH AND INSTALL ALL HARDWARE UNLESS

NOTED OTHERWISE.

3. CONTRACTOR SHALL FURNISH AND INSTALL ALL SCHEDULED

PLUMBING FIXTURES PER CODE REQUIREMENTS.

4. CONTRACTOR SHALL REPLACE ALL PLUMBING LINES TO RISERS WITH

3

4

" COPPER PIPE.

5. CONTRACTOR SHALL PROVIDE PAINT-ON LATICRETE

WATERPROOFING BELOW ALL TILE FLOORS IN ALL BATHROOMS. THE

MEMBRANE SHALL EXTEND UP THE ADJOINING WALLS A MINIMUM OF

SIX INCHES. REFER TO DETAILS.

6. CONTRACTOR SHALL BUILD ALL BATHROOMS WITH NEW STUD WALLS

LINED WITH

5

8

" WONDER BOARD IN WET AREAS AND GREENROCK IN ALL

OTHER AREAS. REFER TO DETAILS.

7. CONTRACTOR SHALL PROVIDE

3

4

" PLYWOOD BLOCKING AT ALL SINK

AND BATH ACCESSORIES LOCATIONS AS WELL AS ALL WALL MOUNTED

GRAB BARS OR SHELVING LOCATIONS. CONTRACTOR SHALL PROVIDE

ALL BLOCKING REQUIRED BY ARCHITECT.

GENERAL NOTES -

CONSTRUCTION PLAN:

8. CONTRACTOR SHALL PROVIDE PLUMBING SHUT OFF VALVES, ACCESS

DOORS, AND PANELS REQUIRED FOR ALL PLUMBING SHUT OFF VALVES.

VERIFY ALL LOCATIONS WITH ARCHITECT IN FEILD.

9. NO RISERS SHALL BE RELOCATED/ REROUTED IN THIS ALTERATION. THE

ALTERATION SHALL NOT REQUIRE DISRUPTION OR RELOCATION OF ANY

UTILITY, PIPING OR ELECTRICAL CONDUIT THAT SERVES ANOTHER TENANT

OR COMMON AREAS, WITHOUT EXPRESS WRITTEN CONSENT OF THE

BUILDING.

10. NO STRUCTURAL ELEMENTS SHALL BE REMOVED AND NO EXTERIOR

MASONRY WALLS SHALL BE PENETRATED WITHOUT EXPRESS WRITTEN

CONSENT OF THE BUILDING. THERE SHALL BE NO CUTTING, CHANNELING,

REMOVAL OR MODIFICATION OF STRUCTURAL ELEMENTS OF THE BUILDING

UNLESS CLEARLY NOTED, APPROVED BY THE BOARD, AND PROPERLY

SHORED, REINFORCED OR REPLACED.

NEW FULL HEIGHT GWB

PARTITION; STUDS AT 16"

O/C WITH

5

8

" SHEETROCK

TO BOTH FACES

LEGEND

EXISTING WALL

7.01EXISTING RADIATOR TO REMAIN. REFERTO ENGINEERS DRAWINGS FOR MOREINFORMATION

CONSTRUCTION NOTES

7.03NEW CUSTOM MILLWORK CUBBIES ABOVE.REFER TO ELEVATIONS AND DETAILS ANDDIMENSIONS.

7.04NEW SCHEDULED FLOOR MOUNT TOILET ONRELOCATED ROUGH. REFER TO ENGINEERSDRAWINGS FOR MORE INFORMATION.

7.05NEW SCHEDULED LAVATORY ON RELOCATEDROUGH. REFER TO ENGINEERS DRAWINGS.

7.06SCHEDULED ADA GRAB BARS. PROVIDEBLOCKING AS REQUIRED

7.07NEW LOCKABLE HALF DUTCH DOOR TO CELLAR;REFER TO SCHEDULE FOR SPECS

7.08EXISTING METERS TO REMAIN. REFER TOENGINEERS DRAWINGS.

7.09

INSTALL NEW ELECTRIC PANELS AT NEW LOCATION;LANDLORD SHALL RUN SERVICE TO NEW LOCATION.REFER TO ENGINEERS DRAWINGS FOR MOREINFORMATION.

7.10NEW STORE FRONT BY LANDLORD.CO-ORDINATE DEMOLITION & CONSTRUCTIONAS REQUIRED.

7.11EXISTING WINDOW TO REMAIN. CONSTRUCTFINISHED GYP BOARD PARTITION OVER WINDOWON INTERIOR OF SPACE. DETAILS TO FOLLOW.

7.12

7.13 DELETED

7.14 SCHEDULED LOCKERS IN CUSTOM MILLWORKSURROUND. REFER TO ELEVATIONS & DETAILS.

7.02 NEW FEATURE WALL. REFER TO ELEVATIONS ANDDETAILS.

DRY ERASE PAINT WALLS WITH STENCILSIGNAGE. REFER TO ELEVATIONS & FINISHSCHEDULE

7.15 CUSTOM MILLWORK CABINET WITH UPPERDRAWERS. REFER TO ELEVATIONS & DETAILS.

7.16 CUSTOM MILLWORK CABINET. REFER TOELEVATIONS & DETAILS.

7.17 CUSTOM MILLWORK CABINET. REFER TOELEVATIONS & DETAILS.

7.18 CUSTOM MILLWORK RECEPTION DESK. REFERTO ELEVATIONS & DETAILS.

7.19 CUSTOM MILLWORK RADIATOR COVER. REFERTO ELEVATIONS & DETAILS.

7.20 CUSTOM BENCH W CABINETS BELOW. REFER TOELEVATIONS & DETAILS.

7.21 DELETED

7.22 NEW OWNER SUPPLIED UNDERCABINETREFRIGERATOR ON DEDICATED OUTLET

7.23 CUSTOM PULL UP BARS; SUPPORT METHOD ANDDETAILS TBD PENDING STRUCTURAL ENGINEERS'SRECOMMENDATIONS

7.24 NEW STEP/LANDING. LEVEL FLOOR AS REQUIRED


Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:


C



NEW YORK, NY 10028


i n t e r i o r s

dhd

Seal & Signature:

BID SET


02 09.06.2012BID SET


A-102.00

CONSTRUCTION PLAN

09.06.12 AS NOTED

PAGE 5 OF 13

01

CELLAR CONSTRUCTION PLAN

SCALE: 1/2"=1'-0"

02

LEVEL ONE CONSTRUCTION PLAN

SCALE: 1/2"=1'-0"

DN

102STUDIO

104STORAGE

WORKOUTSTATIONM

AT

ROLL

ER

WORKOUTSTATIONM

AT

ROLL

ER

WORKOUTSTATIONM

AT

ROLL

ER

WORKOUTSTATIONM

AT

ROLL

ER

WORKOUTSTATIONM

AT

ROLL

ER

WORKOUTSTATIONM

AT

ROLL

ER

WORKOUTSTATIONM

AT

ROLL

ER

ROWER ROWER ROWER ROWER ROWER

4'-0"

4'-0"

2'-11"

4'-0"

4'-0"

WORKOUTSTATION

MA

T

ROLLER

WORKOUTSTATION

MA

T

ROLLER

WORKOUTSTATION

MA

T

ROLLER

WORKOUTSTATION

MA

T

ROLLER

WORKOUTSTATION

MA

T

ROLLER

WORKOUTSTATION

MA

T

ROLLER

WORKOUTSTATION

MA

T

ROLLER

3 TIE

R KE

TTLE

BELL

RA

CK

+40.

5"

104ADA BATHROOM

101RECEPTION

1'-11"

2'-6

1 2

"

3'-9

1

2

"

TIMER

1'-6"

1'-6"

TOWELBIN

103BATHROOM

TOWELBIN

TOWELBIN

MAT RACK+48" MAT

MAT RACK+48" MAT

NEIGHBOURINGTENANT


E/P

OWNER

SUPPLIED

BENCH

3 TIE

R KE

TTLE

BELL

RA

CK

+40.

5"

IPOD

PRIN

TER


CA

SHD

RAW

ER

7.5

7.5

7.5

7.5

12.5

12.5

12.5

12.5

2020

20

202'-1

1

2

"

2'-1

1

2

"

FLAT PACK

GAMES BOX

BY OWNER

FLAT PACK

GAMES BOX

BY OWNER

2"

5'-10

1 2

"

2"

5'-10"

3 4

"

6

1 2

"

2"

1 4

"

3'-1"

1 4

"2"

2'-0

1 2

"

3 4

"

2'-0"

3 4

"

3'-1"

2"

5'-2"

2"

1 4

"

2"

3'-7"

2"

1 4

"

LOCKERS; SPECS TO FOLLOW

CUSTOM BENCHW CUSTOM CUSHION

COATHOOKS; SPECSTO FOLLOW

OWNER SUPPLIEDREFRIGERATOR

3'-9

1

2

"

3'-8"

WALLCLOCK

PULL UP BARS;DETAILS TOFOLLOW

O.A

O.A

1'-0"

1 4

"

3'-5

1 4

"

9

1

2

"

7'-3"

3'-3"

1'-4

1

2

"

OWNER SUPPLIEDFILING CABINET

DYN

AM

AX

DYN

AM

AX

UP

001CELLAR

003CORRIDOR

WA

STEP

IPE

+6' 7

1 2"

BEA

M +

7' 2

"

REFR

IGER

AN

T LI

NES

+ 8

' 4"

PIPE

+6'

11"

BEAM + 7' 2"

DUCT+ 6' 0"

WASTEPIPE +6' 712"

PIPE

+7'

4"

PIPE

+6'

10"

TABLE/DESK

3'-0"

5'-0"

2'-2

1 2

"

1'-3"

TALLFILINGCABINET

MINIFRIDGE

CHROMEMETALSHELVING

CHROMEMETALSHELVING

CHROMEMETALSHELVING

TALLFRIDGE

2'-7

1

2

"2'-7

1

2

"


6'-4"

EQ

EQ

EQ

EQ

EQ

5'-2"


Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:


C



NEW YORK, NY 10028


i n t e r i o r s

dhd

Seal & Signature:

BID SET


02 09.06.2012BID SET


A-105.00

EQUIPMENT PLAN

09.05.12 AS NOTED

SHEET 8 OF 13

01

CELLAR EQUIPMENT PLAN

SCALE: 1/2"=1'-0"

02

LEVEL ONE EQUIPMENT PLAN

SCALE: 1/2"=1'-0"

L2

L2

L2

L2

L3

L4

L4

L4

L3

L7

L7

L4

L6

CEILING +9'-2" AFF

CEILING +8'-9" AFF

CEILING +8'9" AFF

CEILING +9-1" AFF

LIG

HT

C

OV

E +

8'- 3" A

FF

NOT

IN SCOPE

EQ CEQ C

EQ E EQ E

EQ

D

EQ

D

CEILING +9'-2" AFF

CEILING +8'-9" AFF

EXISTING BUILD OUT FOR

STEAM PIPING ABOVE.

EQ G EQ G

EQ

H

EQ

H

L4

C

EQ A

EQ

F

EQ

F

PT-01

PT-01

PT-01

PT-01

PT-01

2'-0"

ST-01

L4

L1

L4L4

L4L4

L4L4

L4 L4

EQ

B

PULL UP

BAR; REFER

TO DETAILS

RELOCATE DUCT

TO ACCOMMODATE

RECESSED

DOWNLIGHT

HOUSINGS BETWEEN

BEAM AND DUCT;

DUCT SHOWN SHADED.

GC SHALL V.I.F. WITH

HOUSING

SPECIFICATIONS.

SPK

SPK

SPK

SPK

PULL UP

BAR; REFER

TO DETAILS

L1

L1

L1

L1

L6

L

L6

(MAXIMIZE)

LIGHTCOVE

SHOWN

SHADED;

TYPICAL ALL

SIDES

6'-0"

6'-0"

6'-0"

6'-0"

L4

2'-9

1 2

"

L4

2'-9

1 2

"2'-9

1 2

"2'-9

1 2

"

EQ A

2'-0

1

2

" V.I.F

EQ

B

1'-6"

2'-9" V.I.F

SK-1

04

RECEPTION DESK

SHOWN DASHED

C

L

C

L

C

L

C

L

C

L

C

L

C

L

C

L

C

L

MILLWORK

BELOW

SHOWN

DASHED

(MAXIMIZE)

(MAXIMIZE)

(MAXIMIZE)

(MAXIMIZE)

EQ J EQ J

MILLWORK SHOWN

DASHED BELOW; ALIGN

SOFFIT WITH WALL AS SHOWN

C

L

C

L

2'-7" V.I.F

5'-5

1 2

" V

.I.F

W

IT

H D

ES

K

EQ I EQ I

C

L

PT

-01

SK-1

MILLWORK

BELOW

SHOWN

DASHED

SK-1

02 03

L2

L2

LIG

HT

C

OV

E +

8'- 3" A

FF

PT

-01

CEILING +9-1" AFF

L2

L2

SHADE POCKET

AT STOREFRONT.

COORDINATE

HEIGHT WITH

GLASS AT

STOREFRONT

DOOR

2'-0

1

2

" V.I.F

2'-9" V.I.F

2'-1

1

2

" V.I.F. 1'-6

3

4

" V.I.F.

6"

1'-0

3 8

"

1'-0

3 8

"

COLUMN

L8

C

L

EQ

EQ

C

L

C

L

L7

EXISTING TO REMAIN

EX.


L7

L1

L2

FLUORESCENT COVELIGHT

RCP LEGEND: REFER TO LIGHTING SCHEDULE

SURFACE MOUNTED FLUORESCENT LIGHT

L3

PENDANT FIXTURE

L4

RECESSED DOWNLIGHT

AREA OF NEW DROPPED G.W.B CEILING

L6

SURFACE MOUNTED FIXTURE

L7

SURFACE MOUNTED FLUORESCENT

SWITCH ON SCHEDULED DIMMER (WHERE

APPLICABLE)

S

UNLESS OTHERWISE NOTED:

1. FINAL SWITCHING LOCATIONS IN MAIN SPACE T.B.D

2. REFER TO ENGINEERS DRAWINGS FOR ENERGY CALCS

3. REFER TO DETAILS FOR NEW CEILING ASSEMBLY DESIGN.

4. ELECTRICIAN SHALL SUPPLY AND INSTALL ALL NEW SWITCHES AS SPECIFIED.

5. REFER TO ELEVATIONS FOR SCONCE MOUNTING LOCATIONS; VERIFY IN FIELD WITH ARCHITECT AND

OWNER PRIOR TO INSTALLATION.

6. PAINT ALL CEILINGS AND SOFFITS; REFER TO FINISH SCHEDULE FOR MORE INFORMATION ON PAINT

COLOR AND TYPE.

7. REFER TO LIGHTING SCHEDULE AND FIXTURE SPECIFICATIONS FOR INFORMATION.

8. ALL REMOTE TRANSFORMERS SHALL BE DISCRETELY LOCATED; LOCATIONS SHALL BE APPROVED BY

OWNER AND ARCHITECT ON SITE.

9. ALL ELECTRICAL WORK SHALL BE PERFORMED BY A LICENSED ELECTRICIAN.

10. GC SHALL SUPPLY LAMPS FOR ALL LIGHT FIXTURES, INCLUDING OWNER SUPPLIED FIXTURES AS

NEEDED.

GENERAL NOTES - REFLECTED CEILING PLAN:


Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:


C



NEW YORK, NY 10028


i n t e r i o r s

dhd

Seal & Signature:

BID SET


02 09.06.2012BID SET


A-103.00

REFLECTED CEILING PLAN

09.06.12 AS NOTED

SHEET 6 OF 13

01

CELLAR REFLECTED CEILING PLAN

SCALE: 1/2"=1'-0"

02

LEVEL ONE REFLECTED CEILING PLAN

SCALE: 1/2"=1'-0"

DN

BAMBOOFLOORING

BAMBOOFLOORING

D-101

D-102

D-104

R-01

W-01

W-01

T-01

T-02

37'-2

1 2

"

13'-11"

2'-9

1

2

"

5'-6

1 2

"

6'-6"

5'-2

1

2

"

PROVIDE SADDLE;

DETAILS TO FOLLOW

2'-10

1

2

"

2'-2

1 2

"

8'-8

1

2

"

7'-3"

21'-4

1 2

"

10'-5

1

2

"

C-01

RUBBERFLOORING

NEW RAISED FLOORASSEMBLY AT STUDIO

SPACE. REFER TO DETAILS

PROVIDE

SADDLE;

DETAILS TO

FOLLOW

DASHED LINE -

EXTENT OF

RAISED FLOOR

PROVIDE

SADDLE;

DETAILS TO

FOLLOW

D-103

EXISTING CONCRETEFLOORING

UP

D-C01

D-C02

C-01

11'-8"

11'-9

1

2

"


FLOOR FINISH NOTES

1. CONTRACTOR SHALL COORDINATE WITHBUILDING'S SUPERINTENDENT FOR INSPECTION OFANY WATERPROOFING DETAILS PRIOR TOCONCEALMENT.

2. REFER TO DETAILS FOR WATERPROOFING, SOUNDMAT UNDERLAYMENT AND TRANSITION DETAILS.

3. CONTRACTOR SHALL PROVIDE FINISH CONTROLSAMPLE SUBMITTALS FOR ARCHITECT/OWNERAPPROVAL PRIOR TO INSTALLATION.

4. ALL TILE LAYOUTS SHALL BE VERIFIED IN FIELDWITH ARCHITECT PRIOR TO INSTALLATION.

5. CONTRACTOR SHALL PROVIDE WATERPROOFING AT BATHROOM FLOORS; EXTEND 6"UP FLOOR UNLESS NOTED OTHERWISE. REFER TOWATERPROOFING DETAILS.

6. CONTRACTOR SHALL PROVIDE METAL FINISHING & TRANSITION STRIPS BETWEEN RUBBER FLOOR AND OTHER FLOOR FINISHES. SCHLUTER OR APPROVED EQUAL. DETAILS T.B.D IN FIELD.


Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:


C



NEW YORK, NY 10028


i n t e r i o r s

dhd

Seal & Signature:

BID SET


02 09.06.2012BID SET


A-104.00

FLOOR FINISH PLAN

09.06.12 AS NOTED

SHEET 7 OF 13

01

CELLAR FLOOR FINISH PLAN

SCALE: 1/2"=1'-0"

02

LEVEL ONE FLOOR FINISH PLAN

SCALE: 1/2"=1'-0"

DN

102STUDIO

104STORAGE

104ADA BATHROOM

101RECEPTION

D-101

D-102

D-104

103BATHROOM

NEIGHBOURINGTENANT


E/P

D-103

2'-6" 2'-6"

EQ

EQ

EQ

EQ

EQ EQ

EQEQ

EQEQ


EQ

EQ

UP

001CELLAR

003CORRIDOR

D-C01

D-C02


UNLESS NOTED OTHERWISE:

1. REFER TO A/V CONSULTANTS WIRING INSTRUCTIONS FOR A/V EQUIPMENT. HOME RUNLOCATION FOR MODEM T.B.D. A/V CONSULTANT SHALL PROVIDE WIRING AND RECEPTACLES.

2. ALL ELECTRICAL WORK SHALL BE PERFORMED BY A LICENSED ELECTRICIAN.

3. ALL NEW OUTLETS AND SWITCHES SHALL BE LUTRON DIVA DECORA STYLE, COLOR: WHITE(UNLESS OTHERWISE NOTED- COLOR MAY VARY), WITH SCREWLESS PLATES.

4. ALL DATA/TELEPHONE CABLES SHALL BE CAT 6.

5. ALL RECEPTACLES SHALL BE HORIZTONALLY MOUNTED IN BASEBOARDS UNLESS OTHERWISENOTED. ALL SWITCHES SHALL BE AT 42" AFF UNLESS OTHERWISE NOTED. COORDINATE WITHMANUFACTURER'S RECOMMENDATIONS FOR ALL APPLIANCE POWER LOCATIONS.

6. ALL BATHROOM OUTLETS SHALL BE G.F.I. DEVICES. ALL RECEPTACLES SHALL BE ON AN ARCFAULT BREAKER AS REQUIRED BY CODE.

7. LOCATE CONVENIENCE OUTLETS AS REQUIRED BY CODE.

ELECTRICAL PLAN GENERAL NOTES:

LOW VOLTAGE/CABLE; CAT 6

TELEPHONE JACK; CAT 6

ELECTRICAL LEGEND

DUPLEX RECEPTACLE MOUNTED HORIZONTALLY IN BASEBOARD

DUPLEX G.F.I. OUTLET; REFER TO ELEVATIONS FOR HEIGHT & LOCATION

DEDICATED APPLIANCE OUTLET; VERIFY LOCATION AND SIZE WITHMANUFACTURER'S SPECIFICATIONS

ELECTRICAL PANEL (SUPPLIED AND INSTALLED BY BUILDING)E / P

QUAD RECEPTACLE; REFER TO ELEVATIONS FOR HEIGHT & LOCATION

A/V SOURCE CONTROL; A/V CONSULTANT SHALL SUPPLY RECEPTACLE &GC SHALL SUPPLY PLATEA/V MIC & IPOD INPUTS; A/V CONSULTANT SHALL SUPPLY RECEPTACLE &GC SHALL SUPPLY PLATE

A/V VOLUME REMOTE; A/V CONSULTANT SHALL SUPPLY RECEPTACLE FORMOUNTING IN STANDARD 3-GANG ELECTRICAL BOX WITHING MUD RING


Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:


C



NEW YORK, NY 10028


i n t e r i o r s

dhd

Seal & Signature:

BID SET


02 09.06.2012BID SET


A-106.00

ELECTRICAL PLAN

09.10.12 AS NOTED

SHEET 9 OF 13

01

CELLAR ELECTRICAL PLAN

SCALE: 1/2"=1'-0"

02

LEVEL ONE ELECTRICAL PLAN

SCALE: 1/2"=1'-0"

DOOR SCHEDULEHINGES/TRACKSNOMINAL DIM.ROOM LOCATIONDOOR NO. DESCRIPTIONTYPE FINISH ADDITIONAL HARDWARE AND NOTESHARDWARE

D-102

2'-2" x 8'-0" x 1-3/4"

D-101

2'-8" x 8'-0" x 1-3/4"

BATHROOM 103

ADA BATHROOM 104

2

1

D-103

PASSAGE TO NEIGHBOURING TENANT 22'-8" x 8'-0" x 1-3/4"D-104

1. ALL DOOR SILLS SHALL BE NO GREATER THAN 1/2" IN HEIGHT AND THE SLOPE OF THE SILL NO GREATER THAN 1" VERT. TO 2" HORIZ. TYPICAL2. GENERAL CONTRACTOR SHALL PROVIDE REINFORCMENT AT HINGE SIDE OF DOOR AS REQUIRED TO PREVENT SAGGING3. DOOR SUPPLIER SHALL FIELD VERIFY AND/OR COORDINATE DIMENSIONS WITH THE GENERAL CONTRACTOR4. GENERAL CONTRACTOR SHALL PROVIDE AND INSTALL ALL HARDWARE IN COMPLIANCE WITH ANSI AND ADA REQUIREMENTS

5. ALL PAINTED DOORS SHALL BE SHOP PRIMED AND PAINTED6. UNDERCUT BATHROOM DOORS 1" OR AS REQUIRED FOR VENTILATION7. SEE DOOR DETAILS FOR MORE INFORMATION8. DOOR FABRICATOR TO VERIFY ALL DIMENSIONS PRIOR TO FABRICATION

SOLID CORE, PAINT GRADE DOOR

STUDIO ENTRANCE PAINT

METAL 45 MIN FIRE-RATED DOOR ON SELF CLOSING HINGE, AS PERANSI/UL 10C & ANSI/UL 10B

2'-8" x 8'-0" x 1-3/4" 2

PAINT

PAINT

PAINT

SOLID CORE, PAINT GRADE POCKET DOOR CONCEALED HAFELE HAWA JUNIOR 80 #940.80.200 TRACK WITH #940.80.001 FITTING SET ACCURATE #2002CPDL-5 FLUSH PULL, US10B OIL RUBBED

BRONZE FINISH

SOLID CORE, PAINT GRADE DOOROMNIA INDUSTRIES #985/ 4 4"x4" SQUARE HINGE, PLAIN BEARING, US10B OIL RUBBED BRONZE FINISH(3 PER DOOR OR AS REQUIRED)

OMNIA #36 PASSAGE SET, US10B OIL RUBBED BRONZE FINISH, 2 38" BACKSET

DELTANA DSLP316U10B DOME STOP LOW PROFILE, OILRUBBED BRONZE FINISH

OMNIA INDUSTRIES #985/ 4 4"x4" SQUARE HINGE, PLAIN BEARING, US10B OIL RUBBED BRONZE FINISH(3 PER DOOR OR AS REQUIRED)

3'-3

"

DOOR TYPE '2' - BOTH SIDES

PAINTED WOOD

CASING 2"x

1

2

" APPLIED

SCHEDULED

LEVER

HINGES


3'-3

"

PAINTED

WOOD

SCHEDULED

PULL

03

02

A002

A002

REFER TO SCHEDULE

REFE

R TO

SC

HED

ULE

HINGES

01

04

A002

A002

REFER TO SCHEDULE

REFE

R TO

SC

HED

ULE

PAINTED

WOOD

PAINTED WOOD

CASING 2"x

1

2

" APPLIED

OMNIA #36 PRIVACY SET, US10B OIL RUBBED BRONZE FINISH, 2 38" BACKSET.

ACCURATE #24ST & #24SE FLUSH PULLS, US10B OIL RUBBED BRONZE FINISH

CELLAR DOOR EXISTING TO REMAIND-C01 EXISTING TO REMAIN N/A EXISTING TO REMAIN

CELLAR STORAGE ROOM DOORD-C02

EXISTING TO REMAIN -

-EXISTING TO REMAIN EXISTING TO REMAIN N/A EXISTING TO REMAIN EXISTING TO REMAIN -

PRE-HUNG T.B.D

D-105 HALF DUTCH DOOR, PAINT GRADE DOORACCESS TO BASEMENT PAINT32'-4" x 3'-4" x 1-3/4" OMNIA INDUSTRIES #985/ 4 4"x4" SQUARE HINGE, PLAIN BEARING, US10B OIL RUBBED BRONZE FINISH(3 PER DOOR OR AS REQUIRED)


3'-3

"

PAINTED WOOD

CASING 2"x

1

2

" APPLIED

SCHEDULED

LEVER

HINGES

03

02

A002

A002

REFER TO SCHEDULE

REFE

R TO

SC

HED

ULE

HINGES

PAINTED

WOOD

3'-6

3 4"

OMNIA #36 PASSAGE SET, US10B OIL RUBBED BRONZE FINISH, 2 38" BACKSET

DELTANA DSLP316U10B DOME STOP LOW PROFILE, OILRUBBED BRONZE FINISHDELTANA DSLP316U10B DOME STOP LOW PROFILE, OILRUBBED BRONZE FINISHDELTANA DSLP316U10B DOME STOP LOW PROFILE, OILRUBBED BRONZE FINISH

SCALE:

DOOR TYPE '2' (JAMB)

N.T.S.

01

PARTITION TYPE 'C'

SCALE: N.T.S.

PARTITION TYPE 'A'

A

SCALE: N.T.S.

CB

PARTITION TYPE 'B'

SCALE: N.T.S.

LINE OF FINISH FLOOR

SCHEDULED BASE

SOUND BATTINSULATION

358" METAL STUDS @ 16" OR

24" O.C. WITH 5 8" TYPE "X"GYP. BD. MTD. VERTICALLYEACH SIDE - SPACING &GAUGE PER LOCAL CODES

VARIES - SEE PLAN

METAL STUD (SIZE VARIESBASED ON LOCATION) @ 16"OR 24" O.C. WITH 5 8" TYPE"X" GYP. BD. MTD.VERTICALLY EACH SIDE -SPACING & GAUGE PERLOCAL CODES

4 7/8"

LINE OF CEILING


SCHEDULED BASE

SOUND BATTINSULATION

LINE OF CEILING

VA

RIES

SEE

ELEV

ATIO

NS

VA

RIES

SEE

ELEV

ATIO

NS


SCHEDULED BASE

1 5/8" MTL. STUD @12"O.C.

WITH 5/8" TYPE "X" GYP.

BD. MTD. VERT. EACH

SIDE

SEE

ELEV

ATIO

NS

VA

RIES

LINE OF FINISHED CEILING

VARIES - SEE PLAN

PIPE WHERE APPLICABLE

12" GREEN BOARD ONBATHROOM SIDE SCHEDULED TILE IN THIN

SET GROUT BED ON 12"

CEMENT BD. (DUROCKOR APPROVED EQUAL)

PARTITION TYPE 'E'

E

SCALE: N.T.S.

LINE OF CEILING

VA

RIES

SEE

ELEV

ATIO

NS

LINE OF EXISTINGWALL OR FRAMING


METAL STUDS @ 16" O.C. -SPACING & GAUGE PERLOCAL CODES. STUDDIMENSION VARIES

5 8" TYPE "X" GYP. BD. MTD.VERTICALLY

SCHEDULED MIRRORPANEL ON THIN SETGROUT BED ON 1

2"CEMENT BD. (DUROCKOR APPROVED EQUAL)

LINE OF CEILING


VA

RIES

SEE

ELEV

ATIO

NS LINE OF NEW WALL

PARTITION TYPE 'F'

F

SCALE: N.T.S.

2 LAYERS OF 58" SHEETROCK

WITH STAGGERED SEAMS

METAL STUDS; SIZING &SPACING TBD BYSTRUCTURAL ENGINEER.FILL WITH THERMAFIBRESAFB INSULATION.

LINE OF CEILINGV

ARI

ESSE

E EL

EVA

TION

S LINE OF EXISTINGFRAMING

PARTITION TYPE 'D'

D

SCALE: N.T.S.

REFER TO ACOUSTIC REPORT FOR

FURTHER INFORMATION

SCHEDULED BASE

358" STEED STUDS, 24"

O.C WITH 1" TYPE SDRYWALL SCREWS 8"O.C, AT FLOORRUNNERS.HORIZONTAL EDGEAND BUTT JOINTS ONOPPOSITE SIDES OFSTUDS NEED NOT BESTAGGERED.

LINE OF CEILING


VA

RIES

SEE

ELEV

ATIO

NS

58" GOLD BONDBRAND FIRE-SHIELDGYPSUM BOARD

PARTITION TYPE 'F'

G

SCALE: N.T.S.

1 HOUR FIRE RATED WALL UL DESIGN V438

3" GLASS FIBERINSUALION FRICTION FITIN STUD SPACE

SCALE:

DOOR TYPE '2' (HEAD AND THRESHOLD)

N.T.S.

02

SCALE:

DOOR TYPE '1' (HEAD AND THRESHOLD)

N.T.S.

04

SCALE:

DOOR TYPE '1' (JAMB)

N.T.S.

03

A-001.00

MILLWORKDETAILS

09.04.12 AS NOTED

SHEET 3 OF 12


Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:


C



NEW YORK, NY 10028


i n t e r i o r s

dhd

Seal & Signature:

BID SET


02 09.06.2012BID SET


9'-2

"

CUSTOM WOODVENEER DESK

OWNER SUPPLIED;GC INSTALLEDPENDANT LIGHTFIXTURES. HEIGHTTBD IN FEILD WITHARCHITECT

CAESARSTONECOUNTER

OPEN

PT-01

WALL

BEYOND

RECEPTION FEATURE WALL ELEVATION

05

SCALE: 1/2"=1'-0"

ST-01

W-02

PT-05

1'-1

1"

LINE OF WALLBUMP OUTWOOD

BASEBOARDAND SHOEMOLDINGBEYOND


W-02

PT-01

WALL

PT-01

WALL

CAESARSTONECOUNTER

ST-01

OWNER SUPPLIED;GC INSTALLED

PENDANT LIGHTFIXTURE. HEIGHT

TBD IN FIELD WITHARCHITECT

WOOD BASEBOARDAND SHOE MOLDING

PT-05

RECEPTION DESK ELEVATION

06

SCALE: 1/2"=1'-0"

3"1 8"

3'-1

7 8"1"

3"1 8"

3'-1

7 8"1"

5'-212"4'-61

2"

1" SQUARE REVEALPAINTED BLACK


18" SQUARE QUIRK

PAINTED BLACK18" SQUARE QUIRK

PAINTED BLACK

RECEPTION DESK SECTION

02

SCALE: 1/2"=1'-0"

CASHDRAWER

LINE OF COLUMN


W-02

834" 5'-81

2"234"

3"1 8"

3'-1

7 8"1"

9'-2

"

EQ EQ

HARDWIREDSMOKED/CO2DETECTOR

PT-01

WALL

CAESARSTONECOUNTER WITHMITERED CORNERS;TYPST-01

ADJUSTABLE SHELVES;CLEAR MAPLE INTERIOR

EQ11 4"

EQEQ

11 4"

FIXED CORNER

SHELVES; CLEAR

MAPLE FINISH.

SUPPORT AS

REQUIRED

CLEAR MAPLEBACK OF DESK

D-103D-102

8'-9

"

8'-9

"

SCHEDULED

HANDBASIN

AND FAUCET

SCHEDULEDWOOD BASEAND SHOEMOLDING

SCHEDULED

HANDBASIN

AND FAUCET

BATHROOM 103 NORTH ELEVATION

02

SCALE: 1/2"=1'-0"

BATHROOM 103 EAST ELEVATION

01

SCALE: 1/2"=1'-0"

BATHROOM 103 WEST ELEVATION

03

SCALE: 1/2"=1'-0"

BATHROOM 104 WEST ELEVATION

01

SCALE: 1/2"=1'-0"

BATHROOM 104 NORTH ELEVATION

02

SCALE: 1/2"=1'-0"

BATHROOM 104 EAST ELEVATION

03

SCALE: 1/2"=1'-0"

BATHROOM 104 SOUTH ELEVATION

04

SCALE: 1/2"=1'-0"

OWNER SUPPLIEDLIGHING FIXTURE.FINALIZE DROP INFIELD WITHARCHITECT

3'-0

"3'-0

"

2'-1

0"

2'-1

0"SCHEDULEDWOOD BASEAND SHOEMOLDING

SCHEDULEDWOOD BASEAND SHOEMOLDING

PT-01

PT-01 PT-01

PT-01

PT-01PT-01

FEATURE

WALL

WALL WALL

WALL

WALLWALL

PT-05

PT-05

PT-05

1'-1"

C

3'-0

"

L

PT-01

WALL

OWNER SUPPLIEDWALL SCONCE

OWNER SUPPLIEDWALL SCONCE

SCHEDULEDHANDBASINAND FAUCET

SCHEDULED

GRAB BAR

SCHEDULED

FLOOR

MOUNTED

TOILET

SCHEDULEDHAND TOWELDISPENSER

SCHEDULEDGRAB BAR

SCHEDULED

FLOOR MOUNTED

TOILET

6'-6

"

6'-9

"

C

L

OWNER SUPPLIEDMIRROR. GC SHALLPROVIDE BLOCKING

EQ

3'-0

"

3'-1

1"2'

-6"

4"

EQ EQ EQ EQ EQ EQ EQ EQ EQ EQ EQ EQ EQ EQ







SCHEDULEDWOOD BASEAND SHOEMOLDINGPT-05


SCHEDULEDHAND TOWELDISPENSER


SCHEDULED

FLOOR

MOUNTED

TOILET


SCHEDULED

FLOOR

MOUNTED

TOILET

EQ EQ

EQSCHEDULED

RECESSED TOILET

PAPER HOLDER.

FINAL LOCATION

TBD IN FIELD

8'-9

"

8'-9

"

8'-9

"

8'-9

"

8'-9

"

8'-9

"

RECEPTION DESK ELEVATION

04

SCALE: 1/2"=1'-0"

CASHDRAWER

FIXED CORNER

SHELVES; CLEAR

MAPLE FINISH.

SUPPORT AS

REQUIRED

234"

4'-9"234"

3"1 8"

3'-1

7 8"1"

CUSTOM WOODVENEER DESKW-02

CAESARSTONECOUNTER WITHMITERED CORNERS;TYPST-01

LINE OF FEATURESTONE WALL

9'-2

"


18" SQUARE QUIRKPAINTED BLACK

EQ11 4"

EQEQ

11 4"

CLEAR MAPLEBACK OF DESK

FINISHEDEND PANEL

W-02

WALL HUNGA/C UNIT

ARTIST WALLGRAPHIC TBD

PT-05

WOOD BASEBOARDAND SHOE MOLDINGBEYOND

101RECEPTION

9'-1"

3'-912"

1'-412"

6"

SK12

06

05

SK12

03

02

04

5'-312"

RECEPTION DESK PLAN

01

SCALE: 1/2"=1'-0"

1'-6" 4'-412" 91

2"

1'-6

"3'

-31 4"

6'-2

5 8"

4'-612"

5'-2

1 2"

FIXED CORNER

SHELVES; CLEAR

MAPLE FINISH.

SUPPORT AS

REQUIRED

ALIGN

OWNER SUPPLIED

REFRIGERATOR.

PROVIDE POWER

RELOCATED

RADIATOR

CUSTOM FILING

CABINET

PT-02

ADJUSTABLE SHELVES;CLEAR MAPLE INTERIOR

POWER, TEL/DATA& MODEM. HOME

RUN TO THISLOCATION

6'-8"

2'-6

1 8"

2'-7

"3'

-71 2"

08

SK13

RECEPTION BACK WALL ELEVATION

03

SCALE: 1/2"=1'-0"

PT-01

WALL

SCHEDULEDOWNER SUPPLIEDREFRIGERATOR

CUSTOM MILLWORKCUBBY

PT-02

CUSTOM 1"MILLWORKCOUNTERPT-02

HEAT RESISTANTREMOVABLE MDF

RADIATOR ACCESS PANELPT-02

9'-2

"2'

-6"

1"2'-71

4" 3'-538"

RETURN AIR SLOT

1"2'

-5"

1'-314"

CUSTOM LETTERSIZE FILING CABINETWITH BLACK CHROMEMOCKETT DP3A EDGEPULL AND SOFTCLOSE GLIDES

1" 234"

07

SK13

1'-1

1 2"1'

-11 2"

12"

1'-312"

12"

1'-258"

18"

CAESARSTONECOUNTER

WITH MITEREDCORNERS, TYP.

ADJUSTABLE SHELVES;CLEAR MAPLE

ST-01

2"


Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:


C



NEW YORK, NY 10028


i n t e r i o r s

dhd

Seal & Signature:

BID SET


02 09.06.2012BID SET


A-301.00

RECEPTION AND BATHROOMELEVATIONS

09.06.12 AS NOTED

SHEET 10 OF 13

10'-1

0"

LIGHT COVEBEYOND

PT-01

WALL

PT-01

LINE OFSTOREFRONT

5"

5"

LINE OF FEATURE WALL.NOTE FEATURE MATERIALWRAPS UP CEILING 24"

CUSTOM PULL UP BAR; SUPPORTMETHOD AND DETAILS TBDPENDING STRUCTURALENGINEER'S RECOMMENDATIONS

STUDIO MILLWORK ELEVATION

01

SCALE: 1/2"=1'-0"

HANGING MATBY OWNER

PT-03

WALL

PAINTED DRY ERASEWALL WITH STENCILGRAPHC (TBD)

JUNGLE GYM

4'-6

1 4"

7'-6

"

LINE OF EXISTINGFLOOR

CUSTOMMILLWORKCUBBIES.

CUSTOM MILLWORKHANGING MAT CUBBYW CARPET BACKING.

HANGING MATRACK BY OWNER

LINE OF EXISTINGSLAB

WD-02

WD-02

PT-05

KETTLEBELLRACK.BY OWNER

9'-4

3 8"1'

-1"

NEW RAISED FLOORING.REFER TO DETAILS.

PT-01


PULL UP PULL UP

TIMER

KETTLEBELLRACK.BY OWNER

SPEAKER

AUDIO

PT-01

PT-01

FLAT PACK

GAMES BOX

BY OWNER

CONES

HURDLES

LADDERS

FLAT PACK

GAMES BOX

BY OWNER

FLAT PACK

GAMES BOX

BY OWNER

FLAT PACK

GAMES BOX

BY OWNER

FLAT PACK

GAMES BOX

BY OWNER

FLAT PACK

GAMES BOX

BY OWNER

JUMP

ROPES

AND

MAGIC ROPE

CUSTOMMILLWORKCUBBY WCARPETBACKINGWD-02

1'-1

1 4" TYP

1'-238" TYP

CUSTOMMILLWORKSHELVING WCARPETBACKINGWD-02

CUSTOM MILLWORKCABINET FOR AUDIOEQUIPMENT W ARCHGRILLEWD-02

WD-02

CUSOM MILLWORKDRAWERS WITHSCHEDULED PULLS

WD-02

BASE

CUSTOM RADIATORENCLOSURE WITHREMOVABLE FRONT PANELON CLEATS. PROVIDEAG10B ARCHITECTURALGRILLE AT TOP SURFACEAND OPEN SPACE FORRETURN AIR. MINIMIZEENCLOUSURE. CONCEALALL PIPING WITHIN WALLS.REPLACE EXISTINGRADIATOR.

2"

10" 3'-918" 5'-10" 5'-10" 3'-11

4" 7'-334" 5'-2" 3'-67

8" 678"

5'-1

1"

PT-01

WALL

WALL

WALL

1'-6

"

2'-012"

117 8"

CONES

HURDLES

LADDERS

6"

FOAM ROLLERSAB MATS

CUSTOM MILLWORKCUBBIES.W CARPETBACKINGWD-02

CUSTOMMILLWORKCUBBIES.WD-02

WD-02

CUSOM MILLWORKCABINET WITHADJUSTABLE SHELVESAND SCHEDULED PULL

SHADE POCKET(MAXIMIZE HEIGHT)

WD-02

4"

3'-512"

2'-3

7 8"

4"

PT-01

WALL

10" TYP

1'-1

" TYP

SP-01

CARPET

BACKING

SP-01

CARPET

BACKING

SP-01

CARPET

BACKING

SP-01

CARPET

BACKING

SP-01

CARPET

BACKING

SP-01

CARPET

BACKING

SP-01

CARPET

BACKING

SP-01

CARPET

BACKING

SP-01

CARPET

BACKING

SP-01

SP-01

CARPET

BACKING

SP-01

CARPET

BACKING

WD-02

BASEWD-02

BASE

SPEAKER

EQ EQ

34"

3 4"

2"

2'-912"

2" 1"618"

2"14" 1

4"2"

14"

2" 2"14"

2" 2"14"

34"

3 4"

2"3 4"

5"1'

-6"

7.5LB DUMBELL

10LB DUMBELL

12.5LB DUMBELL

15LB DUMBELL

20LB DUMBELL

25LB DUMBELL

30LB DUMBELL

3 4"1'

-01 2"

3 4"2"

2'-012"

3 4"1'

-11 4"

2"3 4"

111 2"

3 4"

117 8"

1'-1

1 4"

34"

3'-114" 2"

34"

3'-712"

10" TYP

34"3

4"

16'-318"

5" 5"5'

-4"

2"

5"5'

-4"

2"

PT-01

WALL

PT-03

WALL

D-101

STUDIO WALL ELEVATION

02

SCALE: 1/2"=1'-0"

PT-03

WALL

GL-01

MIRROR WALL

LIGHT COVE BEYOND

PAINTED DRY ERASEWALL

STENCIL GRAPHIC.TBD

AC UNIT. REFER TOENGINEERSDRAWINGS.

VERFITY LOCATIONON SITE WITH A

RCHITECT

AC UNIT. REFER TOENGINEERSDRAWINGS.

VERFITY LOCATIONON SITE WITH A

RCHITECT

PAINTED DRY ERASEWALL WITH STENCILGRAPHC (TBD)

LINE OF NEWDROPPED ACOUSTICCEILING ABOVE.REFER TO DETAILS

5"9'

-0"

NEW RAISED FLOORING.REFER TO DETAILS.

LINE OFSTOREFRONT

PT-01

3'-9" 3'-9" 3'-9" 3'-9" 3'-9"

PT-05


LINE OF FEATUREWALL. NOTE FEATUREMATERIAL WRAPS UPCEILING 24"

2'-0"

SPEAKER SPEAKER

EQ 1

IPOD DOCK

IPOD DOCKSHELF

3'-4

"3"

1'-0"

SHADE POCKET(MAXIMIZE HEIGHT)

1'-9"

3'-6

"6"

1'-11" V.I.F 7'-6" V.I.F 7'-6" V.I.F10'-8" V.I.F

C

L

EQ 1 EQ 1 EQ 1EQ 1

C

L

C

L

6'-0" V.I.F 13'-2" V.I.F

FRESH AIR INTAKE.VERIFY LOCATION ONSITE WITH ARCHITECT

SCHEDULEDSPEAKER

PT-05

BASEBOARD ANDSHOE MOLDINGBEYOND

MIC INPUT &

SOURCE

CONTROL

VOLUME

CONTROL

C

L

C

L

ALIGN ALIGN

LIGHT COVEBEHIND(SHOWNDASHED)

8'-3

" 1 8"EQ

B

18" 1

8" 18"

EQ A

+/- 4

'-6" -

EQ

B

14"1

4"EQ AEQ A+/- 3'-11

8" - EQ A

1"

REVEAL TO MATCHHEIGHT OF SHOEMOLDING ON ADJACENTWALL. PAINT WALL BEHINDBLACK; BENJAMIN MOORECOLOR TO FOLLOW.

1 8"

MILLWORKCUBBY

MILLWORKCUBBY BASE

BLACKENED STEEL PANELSWITH COUNTERSUNKSCREWS, FINISHED TOMATCH. FINAL SCREWPATTERN TO BECONFIRMED BY GC.

CEILING +9'-1" AFF

(MAXIMIZE)

W-02

W-02

EQ C

2"EQ

C2"

1 8"2"

EQ C

+/- 2

'-07 8" -

EQ

C

2" 2"

2"

PAINTED WALL;BENJAMIN MOORECOLOR TO FOLLOW

STUDIO STEEL WALL ELEVATION

03

SCALE: 1/2"=1'-0"


Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:


C



NEW YORK, NY 10028


i n t e r i o r s

dhd

Seal & Signature:

BID SET


02 09.06.2012BID SET


A-302.00

STUDIO ELEVATIONS

09.06.12 AS NOTED

SHEET 11 OF 13

Scale: HALF FULL SCALETILE FLOOR TO TILE WALL - ALT #101

Scale: HALF FULL SCALETYPICAL WOOD FLOOR TO WALL DETAIL02

1 4" UN

DER

CUT

(V.I.F.)

WALL / JAMB WIDTH - V.I.F.

DOOR

STONE SADDLE W/CHAMFERED EDGE

FINISHED TILE FLOOR

FINISHED WOOD FLOOR

1 4"

14"

Scale: HALF FULL SCALEWOOD TO TILE SADDLE DETAIL03

NEW 5/8' GYPSUM BOARD ON FRAMING; SEEWALL TYPE DETAILS

NEW HARDWOOD PAINT GRADE WALL BASE

NEW T.&G. WOOD FLOOR

3/8" EXPANSION SPACE

NEW SHOE MOLDING

QTscu* PERIMETER ISOLATION STRIP; INSTALL PERMANUFACTURER'S INSTALLATION INSTRUCTIONS

NEW OR EXISTING PLYWOOD SUBFLOOR/CORKUNDERLAYMENT TO MATCH EXISTING BUILDINGSTANDARDS (TBD)

ALIGN

APPLIED 6" WOOD BASE

DUROCK ON FRAMING

LATICRETE® HYDRO BAN™WATERPROOFING MEMBRANE, EXTENDSMINIMUM 8" UP WALL AT ALL NON-WETAREAS AND FULL HEIGHT AT ALL WETAREAS

14" THINSET SETTING BED; LATICRETE SURE

SET OR APPROVED EQUAL

LATICRETE 170 SOUND AND CRACKISOLATION MAT

FLOOR TILE AND GROUT

PT-05

TL-01

1/2" MOISTURE-RESISTANT GYP. BD.(GREENBOARD OR APPROVED EQUAL)ON 1/4" DUROCK ON FRAMING

LINE OF SUB-FLOOR

Scale: HALF FULL SCALEWOOD TO RUBBER POCKET DOOR04

3/4"

1/4"

1"

5"

1 4" UN

DER

CUT

(V.I.F.)

WALL / JAMB WIDTH - V.I.F.

DOOR

STONE SADDLE W/CHAMFERED EDGE

FINISHED RUBBER FLOOR

FINISHED WOOD FLOOR

14"

ALIGN

3/4"

1/4"

1"

Scale: 3"=1'-0"HUNG CEILING DETAIL (NON ACOUSTIC)05

SUSPENDED CARRYING CHANNEL: 11/2" COLD ROLLED MIN. 16GA STL,.475 LBS

5/8" TYPE "X" GYPSUM BOARD (NOTTO EXCEED 4LBS./SQFT.)

FRAMING OR FURRING

TYP. HANGER: 1/4"Ø GALV. STL ROD@ MAXIMUM 4'-6"O.C. PER CODE

GAT CLIP 4B 1.5L #16.59.CM

7/8" FURRING CHANNEL @ 16"O.C.

LINE OF EXG. JOISTS

FILL FIRMLY WITH THERMAFIBER

SCHEDULED KINETICS KIP PAD 2X2X2

SCHEDULED SPRING ISOLATOR

14" GAP WHERE PLYWOOD

MEETS GWB - FILLWITH NEOPRENE OR

APPROVED ALTERNATIVE

SHIM FOR 14" GAP ABOVE WHENPLATFORM IS FULLY-LOADED

1 4"

2 LAYERS OF 34" PLYWOODWITH STAGGERED SEAMS

SCHEDULED 12MM RUBBER FLOORING

2 LAYERS OF 58" GWBWITH STAGGERED SEAMS

HEAVY DUTY METAL STUD, SIZED TO SUIT BY STRUCTURAL

ENGINEER. FILL WITHTHERMAFIBER SAFB INSULATION

1"

FILL FIRMLY WITH THERMAFIBER

SCHEDULED KINETICS KIP PAD 2X2X2

SCHEDULED SPRING ISOLATOR

1 4"2 LAYERS OF 34" PLYWOODWITH STAGGERED SEAMS

SCHEDULED12MMRUBBER FLOORING

NEW STOREFRONTDOOR AND FACADE

BY OTHERS

METAL EDGING STRIP BYSCHLUTER OR APPROVED

ALTERNATE

EXISTING BEAM

C JOIST, GAUGE TBDPENDING STRUCTURAL

ENGINEER REPORT


NEW STOREFRONT DOORAND FACADE BY OTHERS

Scale: 3"=1'-0"ACOUSTIC WALL TO FLOOR SECTION DETAIL07 Scale: 3"=1'-0"

ACOUSTIC FLOOR TO FACADE SECTION DETAIL08 Scale: 3"=1'-0"ACOUSTIC CEILING TO FACADE SECTION DETAIL09

LINE OF NEW ACOUSTIC WALL

BEYOND

LINE OF NEWACOUSTIC WALL

BEYOND

EXISTING COLUMN

1"

NEW DOOR/STOREFRONT

BY OTHERS


LINE OF EDGE OF RAISEDPLATFORM

Scale: 3"=1'-0"ACOUSTIC WALL TO FACADE PLAN SECTION10

LINE OF EXISTING WALL

CORNERBEAD

HEAVY DUTY METAL STUD, SIZED TO SUIT BY STRUCTURAL

ENGINEER. FILL WITHTHERMAFIBER SAFB INSULATION

CORNERBEAD

SPACE BETWEENPLATFORM ANDSTOREFRONT21 2"

A-501.00

TYPICAL DETAILS

09.06.12 AS NOTED

SHEET 12 OF 13


Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:


C



NEW YORK, NY 10028


i n t e r i o r s

dhd

Seal & Signature:

BID SET


02 09.06.2012BID SET


FINISHED FLOOR

PT-02

BACK PANEL

AND INTERIOR

4'-4

"1

'-3

"

3 4

"

4"

1'-4"

BLOCKING WHERE

REQUIRED

CUSTOM MILLWORK

CUBBIES

PT-02

1'-2"

LINE OF 1/2" DIVIDING

SUPPORT

2"

3 4

"

11

"

STUDIO MILLWORK SECTION

01

SCALE: 1-1/2"=1'-0"

5'-8

3 4

"

4"

2"


02

SCALE: 1-1/2"=1'-0"

5'-9

"2

"

4"

9"

BLOCKING

WHERE

REQUIRED

PROVIDE BLOCKING

WHERE REQUIRED

FOR MILLWORK

CUSTOM MILLWORK

SURROUND WITH BACK

PANEL

PT-02

7"

LINE OF 1/2"

DIVIDING

SUPPORT


04

SCALE: 1-1/2"=1'-0"

FINISHED FLOOR

1'-3

"

3 4

"

4"

1'-4"

1'-2"

3 4

"


03

SCALE: 1-1/2"=1'-0"

SHOE MOLDING

7'-0

1 4

"

2"

1'-4

1

2

"

BLOCKING

WHERE

REQUIRED

SCHEDULED

LOCKERS

1'-3

3

4

"

LOCKER MILLWORK SECTION

05

SCALE: 1-1/2"=1'-0"

PT-02

CUSTOM MILLWORK CABINETDOOR SCHEDULED ROUTEDEDGE PULLS AND POLISHEDCHROME SOSS HINGES.SIZE TO SUIT

PT-02

CUSTOM MILLWORK DRAWERSWITH ROUTED FINGER PULLAND UNDERMOUNT GLIDES.CLEAR MAPLE INTERIOR.

BLOCKING AS REQUIRED

1 4

"

1/8

"

ROCKWOODMANUFACTURING#590 ROLLER CATCH. US10BFINISH

PT-02

CUSTOM MILLWORK CABINETDOOR SCHEDULED ROUTEDEDGE PULLS AND POLISHEDCHROME SOSS HINGE.SIZE TO SUIT

BACK PANEL

AND INTERIOR

PT-02

FINISHED FLOOR


ROCKWOODMANUFACTURING#590 ROLLER CATCH. US10BFINISH

1/8

"

1'-4"

10

3

4

"

3'-0

1 4

"

1'-1

1

4

"

5'-9

1 2

"

1'-1

1

4

"

BLOCKING WHERE

REQUIRED

CUSTOM MILLWORK

CUBBIES

PT-02

LINE OF 1/2" DIVIDING

SUPPORT

PT-02

CUSTOM MILLWORK CABINETWITH SCHEDULED ROUTEDEDGE PULLS AND CLEARMAPLE INTERIOR.

CONCEALEDEUROPEAN HINGE

PT-02

614" BASE TO ENCASE

LOCKERS

6

1 4

"

1

1

2

"

1'-6

1 4

"

CABINET DOOR TOOVERLAP LOCKER 1

4"

BASE TO OVERLAPLOCKER 14"

1/8

"

1

1

2

"

PAINTED WALL

LIGHT COVE

PAINTED WALL

LIGHT COVE

PAINTED WALL

LIGHT COVE

PAINTED WALL

LIGHT COVE

PAINTED WALL

LINE OF MILLWORKFRAME BEHIND

1'-4

1

2

"

LOCKER MILLWORK SECTION

06

SCALE: 1-1/2"=1'-0"

2"

1/8

"

9

3 4

"6

1 4

"

CUSTOM MILLWORK DRAWERSWITH SCHEDULED ROUTEDEDGE PULL ANDUNDERMOUNT GLIDES.CLEAR MAPLE INTERIOR.

PT-02

CUSTOM 2" BENCH SEAT

PT-02


PT-02

614" BASE

1'-4

1

2

"

RECEPTION MILLWORK SECTION

07

SCALE: 1-1/2"=1'-0"

2"

1/8

"

2'-3

1 4

"

5"

CUSTOM 2" COUNTER

PT-02


PT-02

5" TOEKICK.BLOCKING ASREQUIRED

PT-02

CUSTOM MILLWORK CABINETWITH SCHEDULED ROUTEDEDGE PULLS AND CLEARMAPLE INTERIOR.

EUROPEAN HINGE

2'-1

3 4

"

1'-4

1

2

"

RECEPTION MILLWORK SECTION

08

SCALE: 1-1/2"=1'-0"

2"

1/8

"

2'-3

1 4

"

2"

CUSTOM 2" COUNTER

PT-02


PT-02

5" TOEKICK WITH RETURN AIRSLOT. BLOCKING ASREQUIRED

PT-02

PAINTED WALL

CUSTOM REMOVABLEMILLWORK RADIATORACCESS PANEL ON CLEATS

EXISTING RADIATOR

3"

ARCHITECTURAL GRILLEAC/OB SIZED TO SUIT

RECEPTION SIGN SECTION

09

SCALE: 3"=1'-0"

ALIGN

18" CUSTOM

BLACKENEDSTEEL SIGN

STANDOFFS AS REQUIREDWITH COUNTER SUNK

SCREWS, FINISHEDTO MATCH SIGN.

REFER TO ELEVATIONFOR SCREW LOCATIONS

BACKPAINTED

FEATURE STONEWALLT-03

SCHLUTER JOLLYANGLE; FINISH TBD

THINSET

58" WONDERBOARD

A-502.00

MILLWORKDETAILS

09.06.12 AS NOTED

SHEET 13 OF 13


Project No.: 12017

DateIssueNo.

File:Sheet No.:

Title:

Scale:Date:


C



NEW YORK, NY 10028


i n t e r i o r s

dhd

Seal & Signature:

BID SET


02 09.06.2012BID SET


boutique fitness studio construction set

Documents

existing surfaces

existing electricalwiring

existing lay

existing doors

existing partition wall

existing wood base molding

contractor shallassume

removedexisting wall