brick machinary

8/2/2019 Brick Machinary

1/10

T O N A N G E B E N D I N E X T R U S I O N U N D A U F B E R E I T U N G L E A D I N G I N E X T R U S I O N A N D P R E P A R AT I O N

SCOPE OF SUPPLY

MACHINERY AND

EQUIPMENT FOR THE BRICKAND TILE INDUSTRY


2/10

for feeding, proportioning, buffering and storing raw

materials. Models with 1.0/ 1.25/ 1.5/ 2.0/ 3.0-m beltwidths and 2 - 12-m axle centers. To deal with all the

plethoric functions and fields of application, HNDLE

builds three basic types of box feeders: rubber-belt

box feeders (BKG), standard-type box feeders (BKN)

and heavy-duty box feeders (BKSS).

TYPE BKG

TYPE BKN

TYPE BKSS

Box feeders - invented by HNDLE in 1902 and constantly improved ever

since - are the classical machine for feeding and proportioning material inbulk.

D E L IV E R Y P R O G R A M M

for discharging and proportioning problematic body:

E-series with 4/ 8 or 12 augers, sliding bot-toms,

discharge and comminuting paddles, and separate,

variable-speed drives.

for eliminating hard foreign matter in pit material con-

taining a large proportion of stones. With mechanical

(WSB) or hydraulic (WSBH) drive, reversible crushing

rollers and hydraulic-actuated ejector rake. Roller dia-

meters / lengths of 800 / 1590 and 800 / 1800 mm.

TYPE WSB

TYPE WSBH

EVEN FEEDERS

STONE-ELIMINATING

CRUSHERS

BOX FEEDERS

2


3/10

for eliminating roots, stones, pieces of plastic,

metal, etc., with simultaneous intensive mixing

and homogenization. Mixing trough widths / lengths

of 630 / 870, 1290/ 1050 and 1330 / 1400 mm.

Volumetric throughputs up to approx. 75 m3/h.

TYPE MDSG

for preliminary crushing of cloddy and hard raw materi-

als and inclusions with relative Mohs' hardness levels

up to 6. With mechanical (WMM) or hydraulic (WMH)

drive. Seven sizes with roller diameters of 300 - 920 mm

and roller lengths of 1200 and 1860 mm. Volumetric

throughput peaks at about 250 m3/h, depending on the

roller gap.

TYPE WMM

TYPE WMH

for eliminating hard foreign matter from

plastic / soft clay. Available in three sizes, typeWS, with ejector rake eliminating rollers. Roller

diameters/ widths of 500/ 900, 500 / 1200 and

500/ 1800 mm.

TYPE WS

3

DOUBLE-SHAFTSCREENING MIXERS

CRUSHING ROLLERS

STONE-ELIMINATING ROLLER MILLS


4/10

Duo is for crushing, mixing, homogenizing and moi-

stening soft to hard materials. Four sizes with runnerdiameters between 1800 and 2100 mm and runner

widths of 600 800 mm, grinding track areas of 10.6

16.7 m2. Compact volumetric throughput up to approx

90 m 3/h.

Quadro is for crushing, mixing and moistening pla-

stic to semi-stiff raw materials. Type HMIQ 2070c with

4 runners, each 2100 mm in diameter and 700 mm

wide, and a grinding track area of 16.7 m2. Compact

volumetric throughput up to approx. 120 m3/h.

TYPE HMI

TYPE HMIQ


for crushing semi-stiff to hard materials. Type WSL,

available in four different sizes, with 450 mm impact

roller diameter, 800 mm feed roller diameter, and roller

widths of 600, 800, 1000 and 1200 mm. Volumetric

throughput peaking at approx. 100 m3/h, depending on

the size of the feed and on the width of the roller gap.

TYPE WSL

for preliminary crushing and fine grinding down to a

0.7-mm roller gap. Type WF available in three sizes

with roller barrel diameters/ widths of 1000 / 800,

1000 / 1000 and 1000/ 1200 mm. Max. volumetric

throughput approx. 65 m3/h.

TYPE WF

DESTINTEGRATORS

FINE ROLLER MILL BETA

MIXING WET PAN MILLS

4


5/10

for mixing and homogenizing process body, for

merging and blending waste material with

aggregates, and for buffering and proportioning.

BRSH 12a for low throughputs

BRSH 15a for medium throughputs

BRSH 19b for high throughputs and for crus-

hing materials up to 3 Mohs in the model variant

BRSHB 19a.

TYPE BRSH

TYPE BRSHB

for controlled superfine grinding, with hydrauli-

cally prestressed roller and central gap adjust-ment. Type WFZH, in four sizes with roller dia-

meters of 800 mm and 1000 mm and widths

up to 1500 mm. Max. volumetric throughput of

84 m3/h.

TYPE WFZH

5

CIRCULAR SCREEN FEEDERS ANDSCREENING/CRUSHING MIXER

FINE ROLLER MILLALPHA II


6/10

for extruding soft and semi-stiff ceramic body. Nine

sizes with barrel diameters of 250 - 650 mm.

Volumetric throughputs up 90 m3/h, for extrusion pres-

sures up to approx. 50 bar, depending on the barrel

diameter.

TYPE E

The future is now - with the Futura II combined de-airing extrusion machine,

HNDLE is proffering a product that far surpasses the sum of its features.


HNDLE builds a wide variety of extruders and vacu-

um extruders for low throughput rates in laboratory

and shop at extrusion pressures up to 30 bar. Such

combined de-airing extrusion machines serve equally

well for conventional silicate-ceramic and pasty com-

pounds of diverse provenance.

TYPE PZG

COMBINED DE-AIRING EXTRUSIONMACHINE FUTURA

COMBINED DE-AIRINGEXTRUSION MACHINEFUTURA II

6

for blending, intensively mixing, moistening and

steam heating ceramic body before, during orafter comminution. Four sizes, with mixing

trough widths/lengths of 700/ 3000, 1000 / 4000,

1200 / 4500 und 1400 / 5000 mm. Volumetric

throughputs up to approx. 120 m3/h.

TYPE MDG

DOUBLE-SHAFT MIXERS


7/10

for use in laboratories, research facilities and

short-series production. Including extruder, pri-

mary pug mill and a vacuum pump, all mounted

ready for service on a common base. Extruder

with 80-mm barrel diameter, for extrusion pres-

sures up to 200 bar.

TYPE PZVM

for turning out standard roofing tiles and speci-

als / complementaries. Fully automated system

with one top and two bottom press molds.

Extrusion pressures between 1500 and 2000 N.

Working stroke of 300 - 430 mm, depending on

the height of the mould group.

TYPE WEGA

We rely on extruders from our American partner, J.C.

Steele, for the stiff extrusion of faade bricks / tiles

and for use in pelletizing powdered coal or metal: the

legendary Steele 90 is the world's most powerful

vacuum extruder for stiff extrusion. It comes in five

sizes for throughputs up to 90 t/h.

VACUUMEXTRUDERS FORHIGH PRESURES

TURNABLE PRESSWEGA

STIFF EXTRUDERS

7


8/10

8

for buffering between preparation and shaping,

for mixing and homogenizing large volumes,

and for improving plasticity by souring. The

cross-dredging souring plant enables optimal

homogenization for storage capacities ranging

from roughly 3000 to 45000 m3.

TYPE SEBQ

for buffering between preparation and shaping,

for mixing and homogenizing large volumes, and

for improving plasticity by souring. Available as

single or double sumps, the longitudinal-dred-

ging souring plant is the most widely used sou-

ring system for storage capacities between 1000

and 15000 m3.

TYPE SEBL

LONGITUDINAL-DREDGING

SURING PLANT

CROSS-DREDGINGSURING PLANT

for pressing large-area tiles according to a con-

cept based on a combination of electromecha-nical pressure generation and pressure intensifi-

cation via a drive column and a multiple toggle.

4000 kN pressing power, 140 mm working

stroke.

TYPE NOVA

REVOLVING PRESSNOVA

with a discharger and a silo shaft made of con-

crete, masonry or steel plate - for contents bet-

ween 110 and 1000 m3 and outfeed capacities

up to approx. 55 m3/h, depending on the diame-

ter of the auger.

TYPEAGR

CIRCULAR SILOS


9/10

Performance as you need

The throughput stated for the machines is in m3/h. For

the extruders it refers to the compact, wet pressed

body, while for the box feeders and handling equip-

ment it refers to the loose bulk.

Please note the following rule of thumb:

1 m3 wet pressed body = 1,2 1,35 m3 loose bulk

1 m3 wet pressed body = 1,36 t fired clay

1 t fired clay = 0,735 m3 wet pressed body

Call us to find out more

This brochure gives you a brief overview of the

HNDLE manufacturing technology for the ceramics

industry. If you would like to find out more about any

of the machines mentioned, feel free to call us for a

detailed product brochure.

Laboratory

Conveying and storing

Screening

Feeding and propotioning

Crushing

Mixing and homogenizing

Shaping extruding

Shaping molding

Service


10/10

HNDLE GMBH Maschinen und Anlagenbau

Industriestrae 47

75417 Mhlacker (Germany)

Phone + 49 7041 891-1

Fax + 49 7041 891-232

24-Hours-Hotline + 49 171 7323636

[email protected]

www.haendle.com

A partner of internat ional size

Our products are used in many different countries, and

they are more than a match for our competitors here in

Germany.

With HNDLE, you'll always have a competent contact

in a place near you, anywhere in the world.

Netz

werkMenschWerbeagentur08/2003

brick machinary

Documents