Gaurav KatreSomling Viveki

Abhishek RayboleInstitute of chemical technology Mumbai

Complete finishing lines for woven and knitted fabric:

DryingHeat-settingCuringSanforizingCompactingCoating

Benefits:Very compact designAvailable working widths:1600 mm to 3400 mmStable executionSimple operationAppropriate for the retrofit of existing linesOptimum application since the squeezee can be adjusted horizontally, vertically and angularly and the rear guide roller can be fixed in five positions.Explosion-proof design

Benefits: High tech drive system with load cell control gives better shrinkageAutomatic shrinkage control - Consistent shrinkage Improved geometrical design of the rubber belt unit - Higher Production outputExtended life span of the rubber belt due to larger diameter ofcompression and tensioning rollers and an optimized cooling systemRubber belt resurfacing/grinding unit fully integrated into the machine (no mounting of external unit necessary) – grinding process controlled via PLC to avoid operation errorsVery solid and long lasting machine design with minimized vibrations to ensure a smooth fabric runAll bearings are located outside the wet to avoid corrosion

Benefits: Highest drying performance and flexible for all types of fabrics due to the well-engineered and patented SPLIT-FLOW® air circulation systemUp to 35% energy saving thanks to economical heat recovery and energy saving conceptsAbsolutely homogeneous distribution of air flow and temperature due to the alternating air flow in the thermo zones (every 1.5 m)Optimum straightening results due to an innovative, integrated straightener with shortest possible fabric path to the pin-on pointExtremely robust and low-maintenance chains, chain rails as well as pin bar carriers and clipsExactly reproducible finishing

Characteristics:Integration of a rotary printing screen in the entry zone of the stenterCentering of the fabric in front of the introduction to the coating unitExtremely short fabric path between the coating unit and the pin-on point at the stenterTension-controlled fabric transport of the elastic fabric through the complete process Selective width and length heat-setting of the fabric with a stenter with optionally available fabric support beltFlexible foam processor by Stork Prints, which can be used also for paste processing

Benefits: Unsurpassed high shrinking valuesUsed for woven as well as knitted fabricGentle and uniform compacting of high-quality fabrics made of cotton and its blendsExtremely smooth and voluminous touchLight, silky shining effect on the fabric surfaceHighest production speed with uniform fabric quality

Direct coating on textiles and foils Reverse coating on release paperImpregnations and dip coatingDry and wet lamination of membranes and textile webs or foils

Bruckner’s heat recovery and exhaust air cleaning lines allow considerable energy savings (35%)Energy saving system:- Heat recovery systems (ECO-HEAT) and exhaust air cleaning systems (ECO-AIR).

Save hard cash with BRÜCKNER energy saving systems