Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since 1948.

55

56

57

GTS015GTS02GTS025GTS03GTS035GTS04GTS045

GTS05GTS06GTS07GTS08GTS09

GTS10GTS11GTS12GTS13

GTS14GTS16GTS18GTS20GTS22GTS24GTS26GTS28GTS30

TALURIT SPLICING SYSTEMTable of sizes for INOX ferrules

CODE

58

CODE

59

ALUMINIUM FERRULES

FERRULE SELECTION CHART ACCORDING TO EN 13411-3

DIN codes 1.5 (GTA), 2 (GTA02), 42 (GTA42), are still available on request, however these sizes are not included in the EN13411-3 standards.

60

61

FERRULE SELECTION CHART ACCORDING TO EN 13411-3

PRESS CLAMPS OF CARBON STEEL

Bridco have a range of Talurit Carbon Steel Clamps and Clamps for Flemish eye available on request.

Conical Carbon Steel clamps (STK)

Cylindrical Carbon Steel clamps (ST)

Cylindrical Carbon Steel clamps (STD)

62

ALUMINIUM ROUND CLAMPS

63

18 TON 1-PILLAR SWAGERTALURIT TM

TECHNICAL DATA

64

40 TON 1-PILLAR SWAGER TALURIT SYSTEMSTM

The new 40 ton swager is both efficient and safe! It has the capacity to press T-ferrules up to size No.9 in single stage swaging,and T-ferrules up to size No. 13 in multi stage swaging.The swager can be used with A and A1 TALURIT dies. All dies are manufac-tured from hardened and tempered die steel for a long service life,durability and excellent swaging results.

The swager can be fitted with two different models of electrical hydraulic units.The basic electrical hydraulic unit(HAGG 1,5/700-X-V1) comes with the standard up/down function.Whereas the multifunctional electrical hydraulic unit(HAGG 1,5/700-X-V2) comes with both up/down function and "hold position"to facilitate rope/eye adjustment and to make tool set-upquicker.To minimize cycle time when pressing,the HAGG 1,5/700-X-V2 is also equipped with a stroke limiter that allows control of theretraction stroke length of the piston when operating the swager.

Both hydraulic units are operated by an electrical foot pedal, allowing the operator to use both hands when swaging.Pressure is set by a pressure valve.When the swager is left unused,the automatic shutdown feature will turn the theswager off.The swager is easily restarted by pressing the electrical foot pedal.

Another option is the MA 800 pressure gauge which can be fitted to the swager or the electrical hydraulic unit. By setting the requiredpressure on MA 800,the piston returns automatically once the preset pressure is reached.This saves time and unnecessary movementsfor the operator and prolongs the service time for the dies.The new 40 ton swager can also befitted with a manual hydraulic unit,P59L-40,for operating the swager.

65

75 TON 1-PILLAR SWAGERTALURIT TM

TECHNICAL DATA

66

150 TON 1-PILLAR SWAGERTALURIT TM

TECHNICAL DATA

67

300 Ton 2-Pillar Swager - Type 2S TALURIT TM

TECHNICAL DATA for swagers with 4kW

TECHNICAL DATA for swagers with 5.5kW

68

600 TON 1-PILLAR SWAGERTALURIT TM

TECHNICAL DATA

C D

16 1020 1220 1230 1530 15

69

Press DiesHeight (mm) Width (mm) Intended for

Type A 38 42 18t,22t,25t and 30t presses

Type B 48 50 50t presses

Type B1 48 70 75t, 100t, 150t presses

Type C 78 80 250t, and 300t presses (and larger presses with die holder)

Type C1 78 100 250t and 300t presses ( and larger presses with die holder)

Type D 110 156 500t and 600t presses ( and larger presses with die holder)

Type E 150 220 900t and 1000t presses (and larger presses with die holders)

Type F 200 250 1500t presses (and larger presses with die holder)

Type G 250 300 2000t presses (and larger presses with die holder)

Type H 300 380 3000t presses (and larger presses with die holder)

Type of die holder Length (mm) Width (mm) Height (mm) Weight (kgArticle no:VIN C/D 200 156 102 30VIN C/D EXC 200 156 102 26VIN C1/D 200 156 102 30VIN D/E LIN 280 220 127 60VIN E/F 350 250 152 77VIN E/G 350 305 222 206VIN F/G 430 305 152 135VIN F/H 400 375 250 320VIN G/H 450 380 202 186

Press Capacity (ton) Die Holders

600t C/D (EXC), C1/D1000T C/D (EXC). C1/D, D/E1500T D/E, E/F2000T D/E, E/G, F/G3000T D/E, E/G, F/H, G/H

TECHNICAL DATA

Press Dies for aluminium and copper ferrules

TALURITTM

TALURIT Die Holders for press dies